openwrt/staging/thess.git
11 years agolantiq: add support for ZTE H201L
Luka Perkov [Thu, 19 Sep 2013 00:50:44 +0000 (00:50 +0000)]
lantiq: add support for ZTE H201L

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38048

11 years agomalta: target.mk cosmetical fixup
Luka Perkov [Wed, 18 Sep 2013 23:03:47 +0000 (23:03 +0000)]
malta: target.mk cosmetical fixup

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38047

11 years agobrcm47xx: b44: bgmac: some small changes to the phylib patches
Hauke Mehrtens [Wed, 18 Sep 2013 16:49:52 +0000 (16:49 +0000)]
brcm47xx: b44: bgmac: some small changes to the phylib patches

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38044

11 years agolantiq: fix bug in hcd gpio detetcion code
John Crispin [Wed, 18 Sep 2013 16:31:49 +0000 (16:31 +0000)]
lantiq: fix bug in hcd gpio detetcion code

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38043

11 years agolantiq: fix FRITZ7320 flash window size
John Crispin [Wed, 18 Sep 2013 16:31:45 +0000 (16:31 +0000)]
lantiq: fix FRITZ7320 flash window size

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38042

11 years agolantiq: fix ath9k eeprom loading order bug
John Crispin [Wed, 18 Sep 2013 16:31:41 +0000 (16:31 +0000)]
lantiq: fix ath9k eeprom loading order bug

https://dev.openwrt.org/ticket/14131
http://patchwork.openwrt.org/patch/4038/

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38041

11 years agoralink: DIR-300 B7 and DIR-320/NRU B1 on Ralink RT5350
John Crispin [Wed, 18 Sep 2013 16:31:37 +0000 (16:31 +0000)]
ralink: DIR-300 B7 and DIR-320/NRU B1 on Ralink RT5350

https://dev.openwrt.org/ticket/14129

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38040

11 years agolantiq: fix up default firmware selection for spanish and italian routers
John Crispin [Wed, 18 Sep 2013 16:31:32 +0000 (16:31 +0000)]
lantiq: fix up default firmware selection for spanish and italian routers

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38039

11 years agobrcm47xx: bgmac: b44: add support for Byte Queue Limits
Hauke Mehrtens [Wed, 18 Sep 2013 15:19:25 +0000 (15:19 +0000)]
brcm47xx: bgmac: b44: add support for Byte Queue Limits

This adds support for Byte Queue Limits in bgmac and b44, now it is
possible to use more advanced network queue control algorithms.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38038

11 years agobrcm47xx: update the clock fixes for BCM5354
Hauke Mehrtens [Wed, 18 Sep 2013 14:36:03 +0000 (14:36 +0000)]
brcm47xx: update the clock fixes for BCM5354

This updates the patches for BCM5354 to the version send for upstream
Linux inclusion.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38037

11 years agobrcm47xx: update board detection patches
Hauke Mehrtens [Wed, 18 Sep 2013 14:33:54 +0000 (14:33 +0000)]
brcm47xx: update board detection patches

This is now the version which was send for mainline Linux kernel
inclusion. The data needed to detection a board is now stored in init
data.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38036

11 years agobrcm47xx: add detection for Linksys E900 V1
Hauke Mehrtens [Wed, 18 Sep 2013 14:32:05 +0000 (14:32 +0000)]
brcm47xx: add detection for Linksys E900 V1

Thank you Rafał for the data.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38035

11 years agoath9k: add missing tx locking
Felix Fietkau [Wed, 18 Sep 2013 13:24:55 +0000 (13:24 +0000)]
ath9k: add missing tx locking

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38034

11 years agoodhcp6c: Restart when server returns IAID error
Steven Barth [Wed, 18 Sep 2013 10:27:15 +0000 (10:27 +0000)]
odhcp6c: Restart when server returns IAID error

SVN-Revision: 38032

11 years agolantiq: add v3.10 patches
John Crispin [Tue, 17 Sep 2013 21:46:10 +0000 (21:46 +0000)]
lantiq: add v3.10 patches

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38031

11 years agolantiq: add wifi eep to a803 dts file
John Crispin [Tue, 17 Sep 2013 21:46:04 +0000 (21:46 +0000)]
lantiq: add wifi eep to a803 dts file

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38030

11 years agolantiq: add a subtarget for the xrx200 SoC family
John Crispin [Tue, 17 Sep 2013 21:46:00 +0000 (21:46 +0000)]
lantiq: add a subtarget for the xrx200 SoC family

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38029

11 years agolantiq: update packages for v3.10
John Crispin [Tue, 17 Sep 2013 21:45:56 +0000 (21:45 +0000)]
lantiq: update packages for v3.10

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38028

11 years agolantiq: update dts files
John Crispin [Tue, 17 Sep 2013 21:45:50 +0000 (21:45 +0000)]
lantiq: update dts files

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38027

11 years agoralink: add pinctrl driver
John Crispin [Tue, 17 Sep 2013 21:45:44 +0000 (21:45 +0000)]
ralink: add pinctrl driver

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38026

11 years agoralink: change subtarget order
John Crispin [Tue, 17 Sep 2013 21:45:39 +0000 (21:45 +0000)]
ralink: change subtarget order

this will make image builder build rt305x targets per default

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38025

11 years agobase-files: add a post start hook for procd managed services
John Crispin [Tue, 17 Sep 2013 21:45:34 +0000 (21:45 +0000)]
base-files: add a post start hook for procd managed services

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38024

11 years agoprocd: convert various packages to procd style init.d scripts
John Crispin [Tue, 17 Sep 2013 21:45:30 +0000 (21:45 +0000)]
procd: convert various packages to procd style init.d scripts

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38023

11 years agoprocd: update to latest git head
John Crispin [Tue, 17 Sep 2013 21:45:24 +0000 (21:45 +0000)]
procd: update to latest git head

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38022

11 years agokernel: make most modules use AutoProbe
John Crispin [Tue, 17 Sep 2013 21:45:17 +0000 (21:45 +0000)]
kernel: make most modules use AutoProbe

now that we have modprobe we can set more than half of the modules to AutoProbe

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38021

11 years agoinclude: add AutoProbe support
John Crispin [Tue, 17 Sep 2013 21:45:05 +0000 (21:45 +0000)]
include: add AutoProbe support

This is needed to make modprobe work

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38020

11 years agoubox: make use of modprobe
John Crispin [Tue, 17 Sep 2013 21:45:01 +0000 (21:45 +0000)]
ubox: make use of modprobe

ubox now has modprobe support
build and install the tool

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38019

11 years agolibubox: add packaging info for uloop lua binding
John Crispin [Tue, 17 Sep 2013 21:44:52 +0000 (21:44 +0000)]
libubox: add packaging info for uloop lua binding

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38018

11 years agoath9k: merge a fix for PS-Poll responses + aggregation
Felix Fietkau [Tue, 17 Sep 2013 10:07:56 +0000 (10:07 +0000)]
ath9k: merge a fix for PS-Poll responses + aggregation

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38017

11 years agokernel: backport a fix for multiqueue selection to prevent tcp reordering with fair...
Felix Fietkau [Tue, 17 Sep 2013 10:07:52 +0000 (10:07 +0000)]
kernel: backport a fix for multiqueue selection to prevent tcp reordering with fair queueing

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38016

11 years agokernel: fix config symbol for kmod-crypto-hash
Felix Fietkau [Tue, 17 Sep 2013 09:54:05 +0000 (09:54 +0000)]
kernel: fix config symbol for kmod-crypto-hash

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38015

11 years agomac80211: drop spoofed packets in ad-hoc mode (fixes #12427)
Felix Fietkau [Tue, 17 Sep 2013 09:17:40 +0000 (09:17 +0000)]
mac80211: drop spoofed packets in ad-hoc mode (fixes #12427)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38013

11 years agobrcm47xx: Add support for Huawei E970
Hauke Mehrtens [Mon, 16 Sep 2013 21:09:10 +0000 (21:09 +0000)]
brcm47xx: Add support for Huawei E970

This patch adds support for Huawei E970 wireless gateway devices.
It has been tested on an E970 labelled as T-Mobile web'n'walk Box IV.
E960/B970 should work too, from what I know it's basically the same hardware.

The device has a Broadcom BCM5354 SoC and a built-in 3G USB modem.

It uses a hardware watchdog which needs GPIO-7 to be toggled at least
every 1-2 seconds. This patch uses gpio_wdt module (see my previous
patch today) to take care of this.

Tested and works:  3G wan,  wlan+LED,  VLAN config,  failsafe using reset
button,   image to be used for upgrade from OEM firmware's web interface

Link to the wiki page I've created:  <http://wiki.openwrt.org/toh/huawei/e970>

Issue:

* lzma-loader crashes, so gzipped kernel is used. Presumably due to watchdog
  reset during kernel decompress.

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
SVN-Revision: 38011

11 years agokernel: add generic GPIO watchdog driver
Hauke Mehrtens [Mon, 16 Sep 2013 21:07:52 +0000 (21:07 +0000)]
kernel: add generic GPIO watchdog driver

This is used on Huawei E970 (brcm47xx).

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
SVN-Revision: 38010

11 years agobrcm47xx: add detection for Phicomm M1
Hauke Mehrtens [Mon, 16 Sep 2013 19:53:09 +0000 (19:53 +0000)]
brcm47xx: add detection for Phicomm M1

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38009

11 years agobroadcom-diag: add GPIO configuration for Linksys E2000 V1
Hauke Mehrtens [Mon, 16 Sep 2013 19:52:23 +0000 (19:52 +0000)]
broadcom-diag: add GPIO configuration for Linksys E2000 V1

Thank you Javier Achirica for the patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38008

11 years agobroadcom-diag: Add WRT310N v1 gpio leds and buttons
Hauke Mehrtens [Mon, 16 Sep 2013 19:50:14 +0000 (19:50 +0000)]
broadcom-diag: Add WRT310N v1 gpio leds and buttons

Signed-off-by: Flavio Silveira <fggs@terra.com.br>
SVN-Revision: 38007

11 years agobrcm47xx: detect Linksys E1200 V2
Hauke Mehrtens [Mon, 16 Sep 2013 19:49:02 +0000 (19:49 +0000)]
brcm47xx: detect Linksys E1200 V2

This adds detection for Linksys E1200 V2

Thank you Lightsword and Rafał.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38006

11 years agobrcm47xx: mtd: bcm47xxpart: detect "factory" partition
Hauke Mehrtens [Mon, 16 Sep 2013 19:47:30 +0000 (19:47 +0000)]
brcm47xx: mtd: bcm47xxpart: detect "factory" partition

A new type of partition with magic FCTY was found on Huawei E970:
46 43 54 59 4b 51 37 4e  41 42 31 38 41 32 39 30  |FCTYKQ7NAB18A290|

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 38005

11 years agobrcm47xx: bgmac: implement unaligned addressing for DMA rings that support it
Hauke Mehrtens [Mon, 16 Sep 2013 19:46:34 +0000 (19:46 +0000)]
brcm47xx: bgmac: implement unaligned addressing for DMA rings that support it

This is important patch for new devices that support unaligned
addressing. That devices suffer from the backward-compatibility bug in
DMA engine. In theory we should be able to use old mechanism, but in
practice DMA address seems to be randomly copied into status register
when hardware reaches end of a ring. This breaks reading slot number
from status register and we can't use DMA anymore.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 38004

11 years agokernel/3.10: add new Kconfig option for firmware partition split
Gabor Juhos [Sun, 15 Sep 2013 17:03:29 +0000 (17:03 +0000)]
kernel/3.10: add new Kconfig option for firmware partition split

Add a new kernel config option for generic firmware partition
split support and change the uImage split support to depend on
the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to
MTD_SPLIT_FIRMWARE_NAME to make it more generic.

The patch is in preparation for multiple firmware format
support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38002

11 years agobrcm47xx: add detection code for Huawei E970
Hauke Mehrtens [Sun, 15 Sep 2013 17:00:45 +0000 (17:00 +0000)]
brcm47xx: add detection code for Huawei E970

This is based on a patch by Mathias Adam.

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38001

11 years agokernel: update 3.10 to 3.10.12
Gabor Juhos [Sun, 15 Sep 2013 16:00:41 +0000 (16:00 +0000)]
kernel: update 3.10 to 3.10.12

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38000

11 years agobrcm47xx: bgmac: allow bigger et_swtype nvram variable
Hauke Mehrtens [Sun, 15 Sep 2013 15:50:41 +0000 (15:50 +0000)]
brcm47xx: bgmac: allow bigger et_swtype nvram variable

Without this patch it is impossible to read et_swtype, because the 1
byte space is needed for the terminating null byte. Now it should be
possible to read decimal and hex vars of max 8 bit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37999

11 years agobrcm47xx: mtd: bcm47xxpart: detect block aligned Squashfs partition
Hauke Mehrtens [Sun, 15 Sep 2013 15:47:45 +0000 (15:47 +0000)]
brcm47xx: mtd: bcm47xxpart: detect block aligned Squashfs partition

Most of the bcm47xx devices use TRX format for storing kernel and some
partition like Squashfs or JFFS2. This is pretty flexible solution, CFE
(the bootloader) just writes (and later boots) TRX at some hardcoded
place and paritions can vary in the size.

However some devices don't use TRX format. Very recently we have
discovered ZTE H218N that has kernel and rootfs partitions at some
"random" places.

This patch allows Linux find a rootfs partition after installing custom
image with a CFE bootloader.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 37998

11 years agokernel/3.10: move OpenWrt MTD options into a submenu
Gabor Juhos [Sun, 15 Sep 2013 15:16:16 +0000 (15:16 +0000)]
kernel/3.10: move OpenWrt MTD options into a submenu

Separate OpenWrt specific MTD options from the mainline
option by moving those into a new submenu in the kernel
configuration interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37997

11 years agobrcm47xx: update board detection patch
Hauke Mehrtens [Sun, 15 Sep 2013 15:08:29 +0000 (15:08 +0000)]
brcm47xx: update board detection patch

* Use different structs depending on the number of nvram variables to check.
* Add detection of ZTE H218N, this closes #14151.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37996

11 years agokernel: b53: detect revision of BCM5325
Hauke Mehrtens [Sun, 15 Sep 2013 13:30:49 +0000 (13:30 +0000)]
kernel: b53: detect revision of BCM5325

The revision is stored in a different register than it is in other
Broadcom switches.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37995

11 years agokernel: b53: fix vlan write for BCM5325 revison 3+
Hauke Mehrtens [Sun, 15 Sep 2013 13:29:14 +0000 (13:29 +0000)]
kernel: b53: fix vlan write for BCM5325 revison 3+

These switches are integrated in some recent BCM53XX and BCM47XX SoCs
like the BCM53572.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37994

11 years agobrcm47xx: bgmac: fix internal switch initialization
Hauke Mehrtens [Sun, 15 Sep 2013 09:39:19 +0000 (09:39 +0000)]
brcm47xx: bgmac: fix internal switch initialization

Some devices (BCM4749, BCM5357, BCM53572) have internal switch that
requires initialization. We already have code for this, but because
of the typo in code it was never working. This resulted in network not
working for some routers and possibility of soft-bricking them.

Use correct bit for switch initialization and fix typo in the define.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 37993

11 years agohostapd: adjust the md5sum for the uploaded source tarball (fixes #14155)
Felix Fietkau [Sat, 14 Sep 2013 20:07:35 +0000 (20:07 +0000)]
hostapd: adjust the md5sum for the uploaded source tarball (fixes #14155)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37990

11 years agobrcm47xx: detect Asus RT-N10
Hauke Mehrtens [Sat, 14 Sep 2013 16:19:21 +0000 (16:19 +0000)]
brcm47xx: detect Asus RT-N10

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37989

11 years agokernel: b53: use hard coded switch reset gpio on some boards.
Hauke Mehrtens [Sat, 14 Sep 2013 16:17:36 +0000 (16:17 +0000)]
kernel: b53: use hard coded switch reset gpio on some boards.

The Linksys wrt310n v1 does not have a robo_reset config variable in
nvram, but GPIO Pin 8 is the pin needed for resetting the external
switch, Linksys hard coded it into their source code.

Thank you Devastator for testing.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37988

11 years agokernel: b53: add soft reset for BCM539x switches
Hauke Mehrtens [Sat, 14 Sep 2013 16:14:02 +0000 (16:14 +0000)]
kernel: b53: add soft reset for BCM539x switches

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37987

11 years agobrcm47xx: tg3: use the phy address from et0phyaddr and not the default phy address.
Hauke Mehrtens [Sat, 14 Sep 2013 16:10:37 +0000 (16:10 +0000)]
brcm47xx: tg3: use the phy address from et0phyaddr and not the default phy address.

Thank you Devastator for testing.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37986

11 years agoath9k: add another minor tx path fix
Felix Fietkau [Sat, 14 Sep 2013 15:30:13 +0000 (15:30 +0000)]
ath9k: add another minor tx path fix

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37985

11 years agoiwinfo: when using nl80211, parse interface combinations instead of creating/deleting...
Felix Fietkau [Sat, 14 Sep 2013 14:46:51 +0000 (14:46 +0000)]
iwinfo: when using nl80211, parse interface combinations instead of creating/deleting interfaces

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37983

11 years agoath9k: merge a fix for tx processing issues with aggregation
Felix Fietkau [Sat, 14 Sep 2013 14:46:39 +0000 (14:46 +0000)]
ath9k: merge a fix for tx processing issues with aggregation

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37982

11 years agogeneric/3.10: remove unused defines from the rootfs split patch
Gabor Juhos [Sat, 14 Sep 2013 10:19:10 +0000 (10:19 +0000)]
generic/3.10: remove unused defines from the rootfs split patch

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37981

11 years agogeneric/3.10: reduce number of ifdefs in the rootfs split code
Gabor Juhos [Sat, 14 Sep 2013 10:19:09 +0000 (10:19 +0000)]
generic/3.10: reduce number of ifdefs in the rootfs split code

Use the config_enabled() macro where it is possible.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37980

11 years agoimx6: add network defaults for GW5400-A
Luka Perkov [Fri, 13 Sep 2013 21:50:35 +0000 (21:50 +0000)]
imx6: add network defaults for GW5400-A

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37979

11 years agokernel: add missing config option
Hauke Mehrtens [Fri, 13 Sep 2013 20:39:23 +0000 (20:39 +0000)]
kernel: add missing config option

SVN-Revision: 37978

11 years agobrcm47xx: board detection, GPIO for Linksys E1000 V2.1
Hauke Mehrtens [Fri, 13 Sep 2013 19:24:08 +0000 (19:24 +0000)]
brcm47xx: board detection, GPIO for Linksys E1000 V2.1

This patch adds board detection for the Linksys E1000 V2.1 router, as well
as GPIO support for same.

This fixes bug #14135. Currently, wired networking isn't working on the
router, and I haven't tried the wireless, but with this patch, OpenWRT
successfully boots, and all the LEDs and buttons work properly.

Signed-off-by: Zachary Catlin <zcatlin@indiana.edu>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37977

11 years agoar71xx: refresh patches
Gabor Juhos [Fri, 13 Sep 2013 17:29:16 +0000 (17:29 +0000)]
ar71xx: refresh patches

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37976

11 years agogeneric/3.10: refresh patches
Gabor Juhos [Fri, 13 Sep 2013 17:29:14 +0000 (17:29 +0000)]
generic/3.10: refresh patches

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37975

11 years agogeneric/3.10: rename mtd patches
Gabor Juhos [Fri, 13 Sep 2013 17:24:25 +0000 (17:24 +0000)]
generic/3.10: rename mtd patches

  - change patch numbers to group the related stuff together,
  - add mtd prefix where it is missing,
  - use hyphens in the patch names

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37974

11 years agocns21xx: remove 3.8 support
Gabor Juhos [Fri, 13 Sep 2013 16:39:36 +0000 (16:39 +0000)]
cns21xx: remove 3.8 support

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37973

11 years agocns21xx: switch to 3.10
Gabor Juhos [Fri, 13 Sep 2013 16:39:34 +0000 (16:39 +0000)]
cns21xx: switch to 3.10

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37972

11 years agocns21xx: add support for 3.10
Gabor Juhos [Fri, 13 Sep 2013 16:39:33 +0000 (16:39 +0000)]
cns21xx: add support for 3.10

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37971

11 years agobrcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys device
Hauke Mehrtens [Fri, 13 Sep 2013 16:00:52 +0000 (16:00 +0000)]
brcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys device

Most of the Linksys devices without an own GPIO configuration where
detected as WRT54G. On one board this made OpenWrt to boot into
failsafe every time, because one GPIO configurated as button was not a
button.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37970

11 years agobrcm47xx: detect WRT310NV1
Hauke Mehrtens [Fri, 13 Sep 2013 15:56:35 +0000 (15:56 +0000)]
brcm47xx: detect WRT310NV1

Thanks Devastator for testing

SVN-Revision: 37969

11 years agocns21xx: make cns21xx-ehci a separate driver
Gabor Juhos [Fri, 13 Sep 2013 15:38:42 +0000 (15:38 +0000)]
cns21xx: make cns21xx-ehci a separate driver

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37968

11 years agocns21xx: disable legacy PTY devices
Gabor Juhos [Fri, 13 Sep 2013 15:38:41 +0000 (15:38 +0000)]
cns21xx: disable legacy PTY devices

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37967

11 years agocns21xx: fix broken case statement in led defaults file
Gabor Juhos [Fri, 13 Sep 2013 15:38:40 +0000 (15:38 +0000)]
cns21xx: fix broken case statement in led defaults file

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37966

11 years agocns21xx: enable XZ_DEC_ARM and XZ_DEC_BCJ kernel options
Gabor Juhos [Fri, 13 Sep 2013 15:38:39 +0000 (15:38 +0000)]
cns21xx: enable XZ_DEC_ARM and XZ_DEC_BCJ kernel options

Squashfs is unable to decompress some blocks without that:

  [    0.970000] SQUASHFS error: xz_dec_run error, data probably corrupt
  [    0.980000] SQUASHFS error: squashfs_read_data failed to read block 0x29a72
  [    0.990000] SQUASHFS error: Unable to read fragment cache entry [29a72]
  [    1.000000] SQUASHFS error: Unable to read page, block 29a72, size 14c50
  [    1.010000] SQUASHFS error: Unable to read fragment cache entry [29a72]
  [    1.020000] SQUASHFS error: Unable to read page, block 29a72, size 14c50
  [    1.260000] SQUASHFS error: xz_dec_run error, data probably corrupt

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37965

11 years agoar71xx: add support for TL-MR3040 v2
Gabor Juhos [Fri, 13 Sep 2013 15:28:50 +0000 (15:28 +0000)]
ar71xx: add support for TL-MR3040 v2

This patch adds support for building firmware images for the
TP-Link TL-MR3040 v2. Tested and working on v2.1 hardware.

Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37964

11 years agoar71xx: add wireless bgn led support for dir-825-c1
Gabor Juhos [Fri, 13 Sep 2013 15:01:40 +0000 (15:01 +0000)]
ar71xx: add wireless bgn led support for dir-825-c1

I checked the GPL code drop from D-Link and tried to get the wireless
and LAN switch LEDs to light up. I found some references in
AthSDK/www/DIR-825_C1/bsp.h as well as
AthSDK/www/DIR-825_C1/rootfs/etc/sysconfig/S2gpio.sh, but in the end I
only got the led for 2.4GHz to work. Anyway, here's the patch.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37963

11 years agouhttpd: udpat to git head
Jo-Philipp Wich [Fri, 13 Sep 2013 13:24:45 +0000 (13:24 +0000)]
uhttpd: udpat to git head

- fixes buffer corruption with JSON-RPC list calls
- change JSON-RPC protocol to include the session ID into the call
  attributes instead of passing it via the URL
- forcibly pass effective session ID as "ubus_rpc_session" attribute
  to called procedures
- change ubus acl checking to conform with new ubus session namespace

SVN-Revision: 37962

11 years agorpcd: update to git head
Jo-Philipp Wich [Fri, 13 Sep 2013 13:24:32 +0000 (13:24 +0000)]
rpcd: update to git head

- recalculate session ACLs on reload
- support negative access group expressions in /etc/config/rpcd
- prevent destryoing the default session
- use "ubus_rpc_session" attribute as session identifier to enforce JSON-RPC proxy security

SVN-Revision: 37961

11 years agokernel: gsc depends on kmod-i2c-core
Luka Perkov [Thu, 12 Sep 2013 23:38:54 +0000 (23:38 +0000)]
kernel: gsc depends on kmod-i2c-core

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37960

11 years agobrcm47xx: remove support for kernel 3.8
Hauke Mehrtens [Thu, 12 Sep 2013 22:07:12 +0000 (22:07 +0000)]
brcm47xx: remove support for kernel 3.8

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37959

11 years agobrcm47xx: add default config for new kernel config option
Hauke Mehrtens [Thu, 12 Sep 2013 22:04:55 +0000 (22:04 +0000)]
brcm47xx: add default config for new kernel config option

SVN-Revision: 37958

11 years agokernel: update bcma and ssb to wireless-testing master-2013-09-09
Hauke Mehrtens [Thu, 12 Sep 2013 22:03:45 +0000 (22:03 +0000)]
kernel: update bcma and ssb to wireless-testing master-2013-09-09

SVN-Revision: 37957

11 years agokernel: add support for ESMT F25L32PA with upstream submission
Luka Perkov [Thu, 12 Sep 2013 14:38:48 +0000 (14:38 +0000)]
kernel: add support for ESMT F25L32PA with upstream submission

Signed-off-by: Flavio Silveira <fggs@terra.com.br>
SVN-Revision: 37956

11 years agoodhcp6c: Timing workaround for buggy servers
Steven Barth [Thu, 12 Sep 2013 12:57:42 +0000 (12:57 +0000)]
odhcp6c: Timing workaround for buggy servers

SVN-Revision: 37951

11 years agokernel: fix imx sata module
Luka Perkov [Wed, 11 Sep 2013 22:08:46 +0000 (22:08 +0000)]
kernel: fix imx sata module

The imx sata module has only been backported to imx6 target. This change will
fix buildbot errors due to missing patches in other targets. Keep this until
all targets use kernel version with imx sata support in them.

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37950

11 years agokernel: align the skb padding to power of two
Felix Fietkau [Wed, 11 Sep 2013 14:30:15 +0000 (14:30 +0000)]
kernel: align the skb padding to power of two

The skb is usually started by a padding which allows the protocols in the
network stack to add their headers in front of the payload. The skb can be
reallocated in case the preallocated padding is not large enough. This can for
example happen in the function __skb_cow which will check the requested extra
headroom and allocate more buffer when the requested headroom is bigger than
the available one. The extra buffer is aligned again to the multiple of the
NET_SKB_PAD of the target architecture.

The macro used to create the multiple of the NET_SKB_PAD is written in a way
which allows only values power two as alignment parameter. The currently used
value of 48 bytes can not be written as n ** 2 but as 2 ** 4 + 2 ** 5. The
extra buffer is therefore not always the multiple of 48 but can be 16, 64, 80,
128, 144 and so on. The generated values are also not monotonic (48 requested
bytes are mapped to 80 allocated bytes and 49 requested bytes are mapped to 64
allocated bytes).

These unexpected small values result in more reallocations of the buffer. This
was noticed prominently during tests between two QCA9558 720 MHz devices which
were connected via ethernet to PCs and had a HT40 802.11n 3x3 link between each
other. The throughput PC-to-PC during iperf TCP runs increased reliable from
186 Mibit/s to 214 Mibit/s in one direction and from 195 Mibit/s to 220 Mibit/s
in the other direction. This is a performance increase of ~14% just by reducing
the amount of reallocations.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 37948

11 years agotoolchain/gcc: upgrade linaro gcc 4.6 to 4.6-2013.05
Felix Fietkau [Wed, 11 Sep 2013 14:29:44 +0000 (14:29 +0000)]
toolchain/gcc: upgrade linaro gcc 4.6 to 4.6-2013.05

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37947

11 years agotoolchain/gcc: fix up breakage introduced in r37945
Felix Fietkau [Wed, 11 Sep 2013 14:28:21 +0000 (14:28 +0000)]
toolchain/gcc: fix up breakage introduced in r37945

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37946

11 years agoupgrade Linaro gcc 4.8 to 4.8-2013.08
Imre Kaloz [Wed, 11 Sep 2013 13:19:43 +0000 (13:19 +0000)]
upgrade Linaro gcc 4.8 to 4.8-2013.08

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 37945

11 years agoadd support for Linaro binutils 2.23.2-2013.06
Imre Kaloz [Wed, 11 Sep 2013 13:18:23 +0000 (13:18 +0000)]
add support for Linaro binutils 2.23.2-2013.06

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 37944

11 years agoupgrade to 7.6-2013.05
Imre Kaloz [Wed, 11 Sep 2013 13:16:13 +0000 (13:16 +0000)]
upgrade to 7.6-2013.05

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 37943

11 years agokernel: fix broken depends syntax introduced in r37933
Florian Fainelli [Wed, 11 Sep 2013 12:45:24 +0000 (12:45 +0000)]
kernel: fix broken depends syntax introduced in r37933

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37942

11 years agorpcd: update to git head
Jo-Philipp Wich [Wed, 11 Sep 2013 12:13:33 +0000 (12:13 +0000)]
rpcd: update to git head

- introduces persistent null session to allow access to procedures without login
- implements session.login procedure to support user logins via json-rpc

SVN-Revision: 37941

11 years agokernel: Fix FIQ code on VIVT CPUs (#14145)
Florian Fainelli [Wed, 11 Sep 2013 12:08:44 +0000 (12:08 +0000)]
kernel: Fix FIQ code on VIVT CPUs (#14145)

Backport an upstream patch to fix FIQ code on VIVT CPUs

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37940

11 years agotoolchain: refresh uClibc patches
Florian Fainelli [Wed, 11 Sep 2013 12:08:37 +0000 (12:08 +0000)]
toolchain: refresh uClibc patches

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37939

11 years agotoolchain: define MUSL dynamic linker for SPARC
Florian Fainelli [Wed, 11 Sep 2013 12:08:27 +0000 (12:08 +0000)]
toolchain: define MUSL dynamic linker for SPARC

SPARC builds are currently broken because we do not define the MUSL
dynamic linker name, fix that.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37938

11 years agokernel: add imx sata module
Luka Perkov [Tue, 10 Sep 2013 22:26:37 +0000 (22:26 +0000)]
kernel: add imx sata module

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37937

11 years agoimx6: backport ahci support
Luka Perkov [Tue, 10 Sep 2013 22:26:36 +0000 (22:26 +0000)]
imx6: backport ahci support

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37936

11 years agoimx6: add i2c retry on NAK
Luka Perkov [Tue, 10 Sep 2013 22:26:34 +0000 (22:26 +0000)]
imx6: add i2c retry on NAK

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37935