drm/exynos: remove wait queue for pending page flip

Exynos atomic commit procedures already does this job of waiting for
pending updates to finish, that means using pending_flip_queue is
pointless now because the disable CRTC procedure will never happen
during a page_flip.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: wait all planes updates to finish

Add infrastructure to wait for all planes updates to finish by using
an atomic_t variable to track how many pending updates we are waiting
plus a wait_queue for the wait part.

It also changes vblank behaviour and keeps it enabled for all types
of updates

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: add atomic asynchronous commit

The atomic modesetting interfaces supports async commits that should be
implemented by the drivers. If drm core requests an async commit
exynos_atomic_commit() will now schedule a work task to run the update later.

It also serializes commits that needs to run on the same crtc, putting the
following commit to wait until the current one is finished.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fimd: only finish update if START == START_S

fimd_update_plane() programs BUF_START[win] and during the update
BUF_START[win] is copied to BUF_START_S[win] (its shadow register)
and starts scanning out, then it raises a irq.

The fimd_irq_handler, in the case we have a pending_fb, will check
the fb value was copied to START_S register and finish the update
in case of success.

Based on patch from Daniel Kurtz <djkurtz@chromium.org>

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: add macro to get the address of START_S reg

This macro is need to get the value of the START shadow register, that
will tell if an framebuffer is currently displayed on the screen or not.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: check for pending fb before finish update

The current code was ignoring the end of update for all overlay planes,
caring only for the primary plane update in case of pageflip.

This change adds a change to start to check for pending updates for all
planes through exynos_plane->pending_fb. At the start of plane update the
pending_fb is set with the fb to be shown on the screen. Then only when to
fb is already presented in the screen we set pending_fb to NULL to
signal that the update was finished.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
fixup! drm/exynos: check for pending fb before finish update

drm/exynos: fimd: move window protect code to prepare/cleanup_plane

Only set/clear the update bit in the CRTC's .atomic_begin()/flush()
so all planes are really committed at the same time.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: add prepare and cleanup phases for planes

From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>

.prepare_plane() and .cleanup_plane() allows to perform extra operations
before and after the update of planes. For FIMD for example this will
be used to enable disable the shadow protection bit.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fimd: unify call to exynos_drm_crtc_finish_pageflip()

Unify handling of finished plane update to prepare for a following patch
that will check for the START and START_S regs to really make sure that
the plane was updated.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: don't track enabled state at exynos_crtc

struct drm_crtc already stores the enabled state of the crtc
thus we don't need to replicate enabled in exynos_drm_crtc.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/nouveau/dispnv04: fix build on powerpc

align with mask code in overlay.c, Ben can clean the naming
up later if necessary.

Signed-off-by: Dave Airlie <airlied@redhat.com>

nouveau: fix powerpc build

Reported-by: Ilia Mirkin on irc.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'linux-4.3' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next

Rather large pull request this time around, due to the long-pending
cleanup of the kernel driver being here.  There's a stupidly large
number of commits for that, as I wanted to have the series be
bisectable at a fairly fine-grained level.  That said, a very large
portion of the churn in the rework was automated, and a very large
number of boards from right across the whole range we support have
been tested.  I'm fairly confident there shouldn't be (too many)
issues from this.

Beyond correcting some not-so-great design decisions and making the
code a lot easier to work with, there's not much exciting (lower
memory usage, GPU VM should be a lot faster, etc) to be gained by the
end-user as a result of the cleanup, it mostly lays the groundwork for
future improvements.

A big thanks goes to Alexandre Courbot for testing/debugging the GK20A
codepaths for me :)

Highlights:
- A heap of perfmon work, providing a more useful userspace interface
and specifying counters for a bunch of boards
- Support for GT200 reclocking + other misc pm improvements
- Initial patches towards supporting GM20B (Tegra X1)
- Maxwell DisplayPort fixes
- Cleanup of the kernel driver
- The usual collection of random fixes

* 'linux-4.3' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (312 commits)
  drm/nouveau: bump driver version for release
  drm/nouveau/tegra: merge platform setup from nouveau drm
  drm/nouveau/pci: merge agp handling from nouveau drm
  drm/nouveau/device: remove pci/platform_device from common struct
  drm/nouveau/device: import pciid list and integrate quirks with it
  drm/nouveau/device: cleaner abstraction for device resource functions
  drm/nouveau/mc: move device irq handling to platform-specific code
  drm/nouveau/mc/gf100-: handle second interrupt tree
  drm/nouveau/mc: abstract interface to master intr registers
  drm/nouveau/pci: new subdev
  drm/nouveau/object: merge with handle
  drm/nouveau/core: remove the remainder of the previous style
  drm/nouveau/mpeg: convert to new-style nvkm_engine
  drm/nouveau/sw: convert to new-style nvkm_engine
  drm/nouveau/pm: convert to new-style nvkm_engine
  drm/nouveau/gr: convert to new-style nvkm_engine
  drm/nouveau/fifo: convert to new-style nvkm_engine
  drm/nouveau/disp: convert to new-style nvkm_engine
  drm/nouveau/dma: convert to new-style nvkm_engine
  drm/nouveau/cipher: convert to new-style nvkm_engine
  ...

drm/nouveau: bump driver version for release

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/tegra: merge platform setup from nouveau drm

The copyright header in nvkm/engine/device/platform.c has been replaced
with the NVIDIA one from drm/nouveau_platform.c, as most of the actual
code is now theirs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/pci: merge agp handling from nouveau drm

This commit reinstates the pre-DEVINIT AGP fiddling that was broken in
an earlier commit.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/device: remove pci/platform_device from common struct

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/device: import pciid list and integrate quirks with it

PCI IDs taken from the NVIDIA binary driver, with permission.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/device: cleaner abstraction for device resource functions

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc: move device irq handling to platform-specific code

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc/gf100-: handle second interrupt tree

Doesn't fix any known issue, but best be safe in case control is handed
to us from firmware with these left enabled.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc: abstract interface to master intr registers

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/pci: new subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/object: merge with handle

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core: remove the remainder of the previous style

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mpeg: convert to new-style nvkm_engine

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/sw: convert to new-style nvkm_engine

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/pm: convert to new-style nvkm_engine

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/gr: convert to new-style nvkm_engine

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fifo: convert to new-style nvkm_engine

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/disp: convert to new-style nvkm_engine

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/dma: convert to new-style nvkm_engine

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/cipher: convert to new-style nvkm_engine

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ce: convert to new-style nvkm_engine

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/xtensa: convert to new-style nvkm_engine

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/falcon: convert to new-style nvkm_engine

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/volt: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/tmr: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/therm: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/pmu: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mxm: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mmu: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ltc: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/imem: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/devinit: run devinit scripts right after preinit

This ensures we have a valid mask of disabled engines before we start
trying to execute fini()/init() on the subdevs, potentially touching
devices that don't exist.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ibus: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/i2c: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/gpio: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fuse: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fb: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/devinit: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/clk: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bus: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bios: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bar: convert to new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core: kill some (now) dead code

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/sw: convert user classes to new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/pm: convert user classes to new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mpeg: convert user classes to new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/gr: convert user classes to new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/cipher: convert user classes to new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ce: convert user classes to new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/xtensa: convert user classes to new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/falcon: convert user classes to new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fifo: convert user classes to new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fifo: split user classes out from engine implementations

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/disp: convert user classes to new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/disp: split user classes out from engine implementations

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/dma: convert user classes to new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/dma: split user classes out from engine implementations

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/device: convert ctrl class to new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/device: convert user class to new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/client: convert to new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/sw: remove dependence on namedb/engctx lookup

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mpeg: remove dependence on namedb/engctx lookup

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/gr: remove dependence on namedb/engctx lookup

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fifo: remove dependence on namedb/engctx lookup

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/cipher: remove dependence on namedb/engctx lookup

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/falcon: remove dependence on namedb/engctx lookup

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fb: remove dependence on namedb/engctx lookup

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/sw: turn flip completion into an event

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/sw/nv04: replace direct context access with GetRef method

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ramht: remove dependence on namedb

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/gpuobj: separate allocation from nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/gr: directly use instmem where currently possible

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fifo: directly use instmem for runlists and polling areas

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/xtensa: directly use instmem for ucode image

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/falcon: directly use instmem for ucode image

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/imem/nv04-nv40: directly use instmem for vbios/ramfc/ramro

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bar/gf100: directly use instmem for channel descriptors

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mmu: directly use instmem for page tables

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/imem: improve management of instance memory

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mmu: protect each vm with its own mutex

An upcoming commit requires being able to modify the PRAMIN BAR page
tables while already holding the MMU subdev mutex.

To solve this issue, each VM has been given its own mutex.  As a nice
side-effect, this also allows separate VMs to be updated concurrently.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core: prepare for new-style objects

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/device: prepare for new-style subdevs

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/device: separate construction of pci/tegra devices

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/engine: implement support for new-style nvkm_engine

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/subdev: implement support for new-style nvkm_subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/object: implement support for new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>