lib/vsprintf.c: even faster binary to decimal conversion

The most expensive part of decimal conversion is the divisions by 10
(albeit done using reciprocal multiplication with appropriately chosen
constants).  I decided to see if one could eliminate around half of
these multiplications by emitting two digits at a time, at the cost of a
200 byte lookup table, and it does indeed seem like there is something
to be gained, especially on 64 bits.  Microbenchmarking shows
improvements ranging from -50% (for numbers uniformly distributed in [0,
2^64-1]) to -25% (for numbers heavily biased toward the smaller end, a
more realistic distribution).

On a larger scale, perf shows that top, one of the big consumers of /proc
data, uses 0.5-1.0% fewer cpu cycles.

I had to jump through some hoops to get the 32 bit code to compile and run
on my 64 bit machine, so I'm not sure how relevant these numbers are, but
just for comparison the microbenchmark showed improvements between -30%
and -10%.

The bloat-o-meter costs are around 150 bytes (the generated code is a
little smaller, so it's not the full 200 bytes) on both 32 and 64 bit.
I'm aware that extra cache misses won't show up in a microbenchmark as
used above, but on the other hand decimal conversions often happen in bulk
(for example in the case of top).

I have of course tested that the new code generates the same output as the
old, for both the first and last 1e10 numbers in [0,2^64-1] and 4e9
'random' numbers in-between.

Test and verification code on github: https://github.com/Villemoes/dec.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Tested-by: Jeff Epler <jepler@unpythonic.net>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: rename lib/find_next_bit.c to lib/find_bit.c

This file contains implementation for all find_*_bit{,_le}
So giving it more generic name looks reasonable.

Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: George Spelvin <linux@horizon.com>
Cc: Alexey Klimov <klimov.linux@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Valentin Rothberg <valentinrothberg@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: move find_last_bit to lib/find_next_bit.c

Currently all 'find_*_bit' family is located in lib/find_next_bit.c,
except 'find_last_bit', which is in lib/find_last_bit.c. It seems,
there's no major benefit to have it separated.

Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: George Spelvin <linux@horizon.com>
Cc: Alexey Klimov <klimov.linux@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Valentin Rothberg <valentinrothberg@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: find_*_bit reimplementation

This patchset does rework to find_bit function family to achieve better
performance, and decrease size of text.  All rework is done in patch 1.
Patches 2 and 3 are about code moving and renaming.

It was boot-tested on x86_64 and MIPS (big-endian) machines.
Performance tests were ran on userspace with code like this:

/* addr[] is filled from /dev/urandom */
start = clock();
while (ret < nbits)
ret = find_next_bit(addr, nbits, ret + 1);

end = clock();
printf("%ld\t", (unsigned long) end - start);

On Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz measurements are: (for
find_next_bit, nbits is 8M, for find_first_bit - 80K)

find_next_bit: find_first_bit:
new current new current
26932 43151 14777 14925
26947 43182 14521 15423
26507 43824 15053 14705
27329 43759 14473 14777
26895 43367 14847 15023
26990 43693 15103 15163
26775 43299 15067 15232
27282 42752 14544 15121
27504 43088 14644 14858
26761 43856 14699 15193
26692 43075 14781 14681
27137 42969 14451 15061
... ...

find_next_bit performance gain is 35-40%;
find_first_bit - no measurable difference.

On ARM machine, there is arch-specific implementation for find_bit.

Thanks a lot to George Spelvin and Rasmus Villemoes for hints and
helpful discussions.

This patch (of 3):

New implementations takes less space in source file (see diffstat) and in
object.  For me it's 710 vs 453 bytes of text.  It also shows better
performance.

find_last_bit description fixed due to obvious typo.

[akpm@linux-foundation.org: include linux/bitmap.h, per Rasmus]
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: George Spelvin <linux@horizon.com>
Cc: Alexey Klimov <klimov.linux@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Valentin Rothberg <valentinrothberg@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alpha: forward declare struct pt_regs in processor.h

Removal of exec domains uncovered this new warning.  processor.h re-used
struct pt_regs from personality.h which is now gone.

  ./arch/alpha/include/asm/processor.h:47:33: warning: 'struct pt_regs' declared inside parameter list [enabled by default]

Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

crypto: fix broken crypto_register_instance() module handling

Commit 9c521a200bc3 ("crypto: api - remove instance when test failed")
tried to grab a module reference count before the module was even set.

Worse, it then goes on to free the module reference count after it is
set so you quickly end up with a negative module reference count which
prevents people from using any instances belonging to that module.

This patch moves the module initialisation before the reference
count.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'akpm' (patches from Andrew)

Merge second patchbomb from Andrew Morton:

 - the rest of MM

 - various misc bits

 - add ability to run /sbin/reboot at reboot time

 - printk/vsprintf changes

 - fiddle with seq_printf() return value

* akpm: (114 commits)
  parisc: remove use of seq_printf return value
  lru_cache: remove use of seq_printf return value
  tracing: remove use of seq_printf return value
  cgroup: remove use of seq_printf return value
  proc: remove use of seq_printf return value
  s390: remove use of seq_printf return value
  cris fasttimer: remove use of seq_printf return value
  cris: remove use of seq_printf return value
  openrisc: remove use of seq_printf return value
  ARM: plat-pxa: remove use of seq_printf return value
  nios2: cpuinfo: remove use of seq_printf return value
  microblaze: mb: remove use of seq_printf return value
  ipc: remove use of seq_printf return value
  rtc: remove use of seq_printf return value
  power: wakeup: remove use of seq_printf return value
  x86: mtrr: if: remove use of seq_printf return value
  linux/bitmap.h: improve BITMAP_{LAST,FIRST}_WORD_MASK
  MAINTAINERS: CREDITS: remove Stefano Brivio from B43
  .mailmap: add Ricardo Ribalda
  CREDITS: add Ricardo Ribalda Delgado
  ...

parisc: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lru_cache: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tracing: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Miscellanea:

o Remove unused return value from trace_lookup_stack

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroup: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cris fasttimer: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Miscellanea:

o Coalesce formats, realign arguments

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cris: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

openrisc: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ARM: plat-pxa: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
(as it is here, it doesn't return # of chars emitted) will
eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nios2: cpuinfo: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

microblaze: mb: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

power: wakeup: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86: mtrr: if: remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/bitmap.h: improve BITMAP_{LAST,FIRST}_WORD_MASK

The macro BITMAP_LAST_WORD_MASK can be implemented without a conditional,
which will generally lead to slightly better generated code (221 bytes
saved for allmodconfig-GCOV_KERNEL, ~2k with GCOV_KERNEL).  As a small
bonus, this also ensures that the nbits parameter is expanded exactly
once.

In BITMAP_FIRST_WORD_MASK, if start is signed gcc is technically allowed
to assume it is positive (or divisible by BITS_PER_LONG), and hence just
do the simple mask.  It doesn't seem to use this, and even on an
architecture like x86 where the shift only depends on the lower 5 or 6
bits, and these bits are not affected by the signedness of the expression,
gcc still generates code to compute the C99 mandated value of start %
BITS_PER_LONG.  So just use a mask explicitly, also for consistency with
BITMAP_LAST_WORD_MASK.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tejun Heo <tj@kernel.org>
Reviewed-by: George Spelvin <linux@horizon.com>
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: CREDITS: remove Stefano Brivio from B43

This email address isn't working anymore

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

.mailmap: add Ricardo Ribalda

Work and Home computer had different settings in the mail client.  Some
contributions appear as Ricardo Ribalda, others as Ricardo Ribalda Delgado
(and one as just Ricardo).

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CREDITS: add Ricardo Ribalda Delgado

Add personal details to CREDITS file.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: Use tabs consistently

Consistently use a single tab after the "specifier:" type.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string_helpers.c: change semantics of string_escape_mem

The current semantics of string_escape_mem are inadequate for one of its
current users, vsnprintf().  If that is to honour its contract, it must
know how much space would be needed for the entire escaped buffer, and
string_escape_mem provides no way of obtaining that (short of allocating a
large enough buffer (~4 times input string) to let it play with, and
that's definitely a big no-no inside vsnprintf).

So change the semantics for string_escape_mem to be more snprintf-like:
Return the size of the output that would be generated if the destination
buffer was big enough, but of course still only write to the part of dst
it is allowed to, and (contrary to snprintf) don't do '\0'-termination.
It is then up to the caller to detect whether output was truncated and to
append a '\0' if desired.  Also, we must output partial escape sequences,
otherwise a call such as snprintf(buf, 3, "%1pE", "\123") would cause
printf to write a \0 to buf[2] but leaving buf[0] and buf[1] with whatever
they previously contained.

This also fixes a bug in the escaped_string() helper function, which used
to unconditionally pass a length of "end-buf" to string_escape_mem();
since the latter doesn't check osz for being insanely large, it would
happily write to dst.  For example, kasprintf(GFP_KERNEL, "something and
then %pE", ...); is an easy way to trigger an oops.

In test-string_helpers.c, the -ENOMEM test is replaced with testing for
getting the expected return value even if the buffer is too small.  We
also ensure that nothing is written (by relying on a NULL pointer deref)
if the output size is 0 by passing NULL - this has to work for
kasprintf("%pE") to work.

In net/sunrpc/cache.c, I think qword_add still has the same semantics.
Someone should definitely double-check this.

In fs/proc/array.c, I made the minimum possible change, but longer-term it
should stop poking around in seq_file internals.

[andriy.shevchenko@linux.intel.com: simplify qword_add]
[andriy.shevchenko@linux.intel.com: add missed curly braces]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string_helpers.c: refactor string_escape_mem

When printf is given the format specifier %pE, it needs a way of obtaining
the total output size that would be generated if the buffer was large
enough, and string_escape_mem doesn't easily provide that.  This is a
refactorization of string_escape_mem in preparation of changing its
external API to provide that information.

The somewhat ugly early returns and subsequent seemingly redundant
conditionals are to make the following patch touch as little as possible
in string_helpers.c while still preserving the current behaviour of never
outputting partial escape sequences.  That behaviour must also change for
%pE to work as one expects from every other printf specifier.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/vsprintf.c: fix potential NULL deref in hex_string

The helper hex_string() is broken in two ways.  First, it doesn't
increment buf regardless of whether there is room to print, so callers
such as kasprintf() that try to probe the correct storage to allocate will
get a too small return value.  But even worse, kasprintf() (and likely
anyone else trying to find the size of the result) pass NULL for buf and 0
for size, so we also have end == NULL.  But this means that the end-1 in
hex_string() is (char*)-1, so buf < end-1 is true and we get a NULL
pointer deref.  I double-checked this with a trivial kernel module that
just did a kasprintf(GFP_KERNEL, "%14ph", "CrashBoomBang").

Nobody seems to be using %ph with kasprintf, but we might as well fix it
before it hits someone.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/vsprintf: add %pC{,n,r} format specifiers for clocks

Add format specifiers for printing struct clk:
  - '%pC' or '%pCn': name (Common Clock Framework) or address (legacy
    clock framework) of the clock,
  - '%pCr': rate of the clock.

[akpm@linux-foundation.org: omit code if !CONFIG_HAVE_CLK]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/vsprintf: Move integer format types to the top

Move the format types for 64-bit integers and configurable size integers
to the top, so they're next to the other integer format types.  While at
it, add the missing format types for s32 and u32.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/vsprintf: document %p parameters passed by reference

This patch series improves the documentation for printk() formats, and
adds support for printing clocks.  The latter has always been a hassle if
you wanted to support both the common and legacy clock frameworks.

  - '%pC' and '%pCn' print the name (Common Clock Framework) or address
    (legacy clock framework) of a clock,
  - '%pCr' prints the current clock rate.

This patch (of 3):

Make sure all %p extensions that take parameters by references are
documented to do so.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/vsprintf.c: another small hack

Making ZEROPAD == '0'-' ', we can eliminate a few more instructions.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/vsprintf.c: eliminate duplicate hex string array

gcc doesn't merge or overlap const char[] objects with identical contents
(probably language lawyers would also insist that these things have
different addresses), but there's no reason to have the string
"0123456789ABCDEF" occur in multiple places.  hex_asc_upper is declared in
kernel.h and defined in lib/hexdump.c, which is unconditionally compiled
in.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/vsprintf.c: reduce stack use in number()

At least since the initial git commit, when base was passed as a separate
parameter, number() has only been called with bases 8, 10 and 16.  I'm
guessing that 66 was to accommodate 64 0/1, a sign and a '\0', but the
buffer is only used for the actual digits.  Octal digits carry 3 bits of
information, so 24 is enough.  Spell that 3*sizeof(num) so one less place
needs to be changed should long long ever be 128 bits.  Also remove the
commented-out code that would handle an arbitrary base.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/vsprintf.c: eliminate some branches

Since FORMAT_TYPE_INT is simply 1 more than FORMAT_TYPE_UINT, and
similarly for BYTE/UBYTE, SHORT/USHORT, LONG/ULONG, we can eliminate a few
instructions by making SIGN have the value 1 instead of 2, and then use
arithmetic instead of branches for computing the right spec->type.  It's a
little hacky, but certainly in the same spirit as SMALL needing to have
the value 0x20.  For example for the spec->qualifier == 'l' case, gcc now
generates

     75e:       0f b6 53 01             movzbl 0x1(%rbx),%edx
     762:       83 e2 01                and    $0x1,%edx
     765:       83 c2 09                add    $0x9,%edx
     768:       88 13                   mov    %dl,(%rbx)

instead of

     763:       0f b6 53 01             movzbl 0x1(%rbx),%edx
     767:       83 e2 02                and    $0x2,%edx
     76a:       80 fa 01                cmp    $0x1,%dl
     76d:       19 d2                   sbb    %edx,%edx
     76f:       83 c2 0a                add    $0xa,%edx
     772:       88 13                   mov    %dl,(%rbx)

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: comment pr_cont() stating it is only to continue a line

KERN_CONT is nicely commented in kern_levels.h, but pr_cont() is now used
more often, and it lacks the comment stating what it is used for.  It can
be confused as continuing the log level, but that is not its purpose.  Its
purpose is to continue a line that had no newline enclosed.  This should
be documented by pr_cont() as well.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc/powernv: reboot when requested by firmware

Use orderly_reboot so userspace will to shut itself down via the reboot
path.  This is required for graceful reboot initiated by the BMC, such as
when a user uses ipmitool to issue a 'chassis power cycle' command.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/reboot.c: add orderly_reboot for graceful reboot

The kernel has orderly_poweroff which allows the kernel to initiate a
graceful shutdown of userspace, by running /sbin/poweroff.  This adds
orderly_reboot that will cause userspace to shut itself down by calling
/sbin/reboot.

This will be used for shutdown initiated by a system controller on
platforms that do not use ACPI.

orderly_reboot() should be used when the system wants to allow userspace
to gracefully shut itself down.  For cases where the system may imminently
catch on fire, the existing emergency_restart() provides an immediate
reboot without involving userspace.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/sbus/char/envctrl.c: ignore orderly_poweroff return value

orderly_poweroff() unconditionally returns 0, so remove the dead code that
checks the return value.

A future patch will change the return type to void.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/hung_task.c: change hung_task.c to use for_each_process_thread()

In check_hung_uninterruptible_tasks() avoid the use of deprecated
while_each_thread().

The "max_count" logic will prevent a livelock - see commit 0c740d0a
("introduce for_each_thread() to replace the buggy while_each_thread()").
Having said this let's use for_each_process_thread().

Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dave Wysochanski <dwysocha@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/resource.c: remove deprecated __check_region() and friends

All users of __check_region(), check_region(), and check_mem_region() are
gone.  We got rid of the last user in v4.0-rc1.  Remove them.

bloat-o-meter on x86_64 shows:

add/remove: 0/3 grow/shrink: 0/0 up/down: 0/-102 (-102)
function                                     old     new   delta
__kstrtab___check_region                      15       -     -15
__ksymtab___check_region                      16       -     -16
__check_region                                71       -     -71

Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel: conditionally support non-root users, groups and capabilities

There are a lot of embedded systems that run most or all of their
functionality in init, running as root:root.  For these systems,
supporting multiple users is not necessary.

This patch adds a new symbol, CONFIG_MULTIUSER, that makes support for
non-root users, non-root groups, and capabilities optional.  It is enabled
under CONFIG_EXPERT menu.

When this symbol is not defined, UID and GID are zero in any possible case
and processes always have all capabilities.

The following syscalls are compiled out: setuid, setregid, setgid,
setreuid, setresuid, getresuid, setresgid, getresgid, setgroups,
getgroups, setfsuid, setfsgid, capget, capset.

Also, groups.c is compiled out completely.

In kernel/capability.c, capable function was moved in order to avoid
adding two ifdef blocks.

This change saves about 25 KB on a defconfig build.  The most minimal
kernels have total text sizes in the high hundreds of kB rather than
low MB.  (The 25k goes down a bit with allnoconfig, but not that much.

The kernel was booted in Qemu.  All the common functionalities work.
Adding users/groups is not possible, failing with -ENOSYS.

Bloat-o-meter output:
add/remove: 7/87 grow/shrink: 19/397 up/down: 1675/-26325 (-24650)

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Iulia Manda <iulia.manda21@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test-hexdump.c: fix initconst confusion

const char *...[] is not const, but an array of pointer to const.  So
these arrays cannot be __initconst, but must be __initdata

This fixes section conflicts with LTO.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

paride: fix the "verbose" module param

The verbose module parameter can be set to 2 for extremely verbose
messages so the type should be int instead of bool.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tim Waugh <tim@cyberelk.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux: remove empty conditionals

Commit 607ca46e97a1 ("UAPI: (Scripted) Disintegrate include/linux") left
behind some empty conditional blocks.  Since they are useless and may
cause a reader to wonder whether something is missing, remove them.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

/proc/PID/status: show all sets of pid according to ns

If some issues occurred inside a container guest, host user could not know
which process is in trouble just by guest pid: the users of container
guest only knew the pid inside containers.  This will bring obstacle for
trouble shooting.

This patch adds four fields: NStgid, NSpid, NSpgid and NSsid:

a) In init_pid_ns, nothing changed;

b) In one pidns, will tell the pid inside containers:
  NStgid: 21776   5       1
  NSpid:  21776   5       1
  NSpgid: 21776   5       1
  NSsid:  21729   1       0
  ** Process id is 21776 in level 0, 5 in level 1, 1 in level 2.

c) If pidns is nested, it depends on which pidns are you in.
  NStgid: 5       1
  NSpid:  5       1
  NSpgid: 5       1
  NSsid:  1       0
  ** Views from level 1

[akpm@linux-foundation.org: add CONFIG_PID_NS ifdef]
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Tested-by: Serge Hallyn <serge.hallyn@canonical.com>
Tested-by: Nathan Scott <nathans@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: fix error return code

Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: remove extra cond_resched() in __zs_compact

Do not perform cond_resched() before the busy compaction loop in
__zs_compact(), because this loop does it when needed.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: fix fatal corruption due to wrong size class selection

There is no point in overriding the size class below.  It causes fatal
corruption on the next chunk on the 3264-bytes size class, which is the
last size class that is not huge.

For example, if the requested size was exactly 3264 bytes, current
zsmalloc allocates and returns a chunk from the size class of 3264 bytes,
not 4096.  User access to this chunk may overwrite head of the next
adjacent chunk.

Here is the panic log captured when freelist was corrupted due to this:

    Kernel BUG at ffffffc00030659c [verbose debug info unavailable]
    Internal error: Oops - BUG: 96000006 [#1] PREEMPT SMP
    Modules linked in:
    exynos-snapshot: core register saved(CPU:5)
    CPUMERRSR: 0000000000000000, L2MERRSR: 0000000000000000
    exynos-snapshot: context saved(CPU:5)
    exynos-snapshot: item - log_kevents is disabled
    CPU: 5 PID: 898 Comm: kswapd0 Not tainted 3.10.61-4497415-eng #1
    task: ffffffc0b8783d80 ti: ffffffc0b71e8000 task.ti: ffffffc0b71e8000
    PC is at obj_idx_to_offset+0x0/0x1c
    LR is at obj_malloc+0x44/0xe8
    pc : [<ffffffc00030659c>] lr : [<ffffffc000306604>] pstate: a0000045
    sp : ffffffc0b71eb790
    x29: ffffffc0b71eb790 x28: ffffffc00204c000
    x27: 000000000001d96f x26: 0000000000000000
    x25: ffffffc098cc3500 x24: ffffffc0a13f2810
    x23: ffffffc098cc3501 x22: ffffffc0a13f2800
    x21: 000011e1a02006e3 x20: ffffffc0a13f2800
    x19: ffffffbc02a7e000 x18: 0000000000000000
    x17: 0000000000000000 x16: 0000000000000feb
    x15: 0000000000000000 x14: 00000000a01003e3
    x13: 0000000000000020 x12: fffffffffffffff0
    x11: ffffffc08b264000 x10: 00000000e3a01004
    x9 : ffffffc08b263fea x8 : ffffffc0b1e611c0
    x7 : ffffffc000307d24 x6 : 0000000000000000
    x5 : 0000000000000038 x4 : 000000000000011e
    x3 : ffffffbc00003e90 x2 : 0000000000000cc0
    x1 : 00000000d0100371 x0 : ffffffbc00003e90

Reported-by: Sooyong Suk <s.suk@samsung.com>
Signed-off-by: Heesub Shin <heesub.shin@samsung.com>
Tested-by: Sooyong Suk <s.suk@samsung.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: remove unnecessary insertion/removal of zspage in compaction

In putback_zspage, we don't need to insert a zspage into list of zspage
in size_class again to just fix fullness group. We could do directly
without reinsertion so we could save some instuctions.

Reported-by: Heesub Shin <heesub.shin@samsung.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Ganesh Mahendran <opensource.ganesh@gmail.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Gunho Lee <gunho.lee@lge.com>
Cc: Juneho Choi <juno.choi@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: micro-optimize zs_object_copy()

A micro-optimization.  Avoid additional branching and reduce (a bit)
registry pressure (f.e.  s_off += size; d_off += size; may be calculated
twise: first for >= PAGE_SIZE check and later for offset update in "else"
clause).

scripts/bloat-o-meter shows some improvement

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-10 (-10)
function                          old     new   delta
zs_object_copy                    550     540     -10

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: remove synchronize_rcu from zs_compact()

Do not synchronize rcu in zs_compact(). Neither zsmalloc not
zram use rcu.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: deprecate zram attrs sysfs nodes

Add Documentation/ABI/obsolete/sysfs-block-zram file and list obsolete and
deprecated attributes there.  The patch also adds additional information
to zram documentation and describes the basic strategy:

- the existing RW nodes will be downgraded to WO nodes (in 4.11)
- deprecated RO sysfs nodes will eventually be removed (in 4.11)

Users will be additionally notified about deprecated attr usage by
pr_warn_once() (added to every deprecated attr _show()), as suggested by
Minchan Kim.

User space is advised to use zram<id>/stat, zram<id>/io_stat and
zram<id>/mm_stat files.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: export new 'mm_stat' sysfs attrs

Per-device `zram<id>/mm_stat' file provides mm statistics of a particular
zram device in a format similar to block layer statistics.  The file
consists of a single line and represents the following stats (separated by
whitespace):

        orig_data_size
        compr_data_size
        mem_used_total
        mem_limit
        mem_used_max
        zero_pages
        num_migrated

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: export new 'io_stat' sysfs attrs

Per-device `zram<id>/io_stat' file provides accumulated I/O statistics of
particular zram device in a format similar to block layer statistics.  The
file consists of a single line and represents the following stats
(separated by whitespace):

        failed_reads
        failed_writes
        invalid_io
        notify_free

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: describe device attrs in documentation

Briefly describe exported device stat attrs in zram documentation.  We
will eventually get rid of per-stat sysfs nodes and, thus, clean up
Documentation/ABI/testing/sysfs-block-zram file, which is the only source
of information about device sysfs nodes.

Add `num_migrated' description, since there is no independent
`num_migrated' sysfs node (and no corresponding sysfs-block-zram entry),
it will be exported via zram<id>/mm_stat file.

At this point we can provide minimal description, because sysfs-block-zram
still contains detailed information.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: use generic start/end io accounting

Use bio generic_start_io_acct() and generic_end_io_acct() to account
device's block layer statistics.  This will let users to monitor zram
activities using sysstat and similar packages/tools.

Apart from the usual per-stat sysfs attr, zram IO stats are now also
available in '/sys/block/zram<id>/stat' and '/proc/diskstats' files.

We will slowly get rid of per-stat sysfs files.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: move compact_store() to sysfs functions area

A cosmetic change.  We have a new code layout and keep zram per-device
sysfs store and show functions in one place.  Move compact_store() to that
handlers block to conform to current layout.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: remove `num_migrated' device attr

This patch introduces rework to zram stats.  We have per-stat sysfs nodes,
and it makes things a bit hard to use in user space: it doesn't give an
immediate stats 'snapshot', it requires user space to use more syscalls -
open, read, close for every stat file, with appropriate error checks on
every step, etc.

First, zram now accounts block layer statistics, available in
/sys/block/zram<id>/stat and /proc/diskstats files.  So some new stats are
available (see Documentation/block/stat.txt), besides, zram's activities
now can be monitored by sysstat's iostat or similar tools.

Example:
cat /sys/block/zram0/stat
248     0    1984    0   251029     0  2008232   5120   0   5116   5116

Second, group currently exported on per-stat basis nodes into two
categories (files):

-- zram<id>/io_stat
accumulates device's IO stats, that are not accounted by block layer,
and contains:
        failed_reads
        failed_writes
        invalid_io
        notify_free

Example:
cat /sys/block/zram0/io_stat
0        0        0   652572

-- zram<id>/mm_stat
accumulates zram mm stats and contains:
        orig_data_size
        compr_data_size
        mem_used_total
        mem_limit
        mem_used_max
        zero_pages
        num_migrated

Example:
cat /sys/block/zram0/mm_stat
434634752 270288572 279158784        0 579895296    15060        0

per-stat sysfs nodes are now considered to be deprecated and we plan to
remove them (and clean up some of the existing stat code) in two years (as
of now, there is no warning printed to syslog about deprecated stats being
used).  User space is advised to use the above mentioned 3 files.

This patch (of 7):

Remove sysfs `num_migrated' attribute.  We are moving away from per-stat
device attrs towards 3 stat files that will accumulate io and mm stats in
a format similar to block layer statistics in /sys/block/<dev>/stat.  That
will be easier to use in user space, and reduce the number of syscalls
needed to read zram device statistics.

`num_migrated' will return back in zram<id>/mm_stat file.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zsmalloc.c: fix comment for get_pages_per_zspage

Signed-off-by: Yinghao Xie <yinghao.xie@sumsung.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: zsmalloc documentation

Create zsmalloc doc which explains design concept and stat information.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Gunho Lee <gunho.lee@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: add fullness into stat

During investigating compaction, fullness information of each class is
helpful for investigating how the compaction works well.  With that, we
could know how compaction works well more clear on each size class.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Gunho Lee <gunho.lee@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: record handle in page->private for huge object

We store handle on header of each allocated object so it increases the
size of each object by sizeof(unsigned long).

If zram stores 4096 bytes to zsmalloc(ie, bad compression), zsmalloc needs
4104B-class to add handle.

However, 4104B-class has 1-pages_per_zspage so wasted size by internal
fragment is 8192 - 4104, which is terrible.

So this patch records the handle in page->private on such huge object(ie,
pages_per_zspage == 1 && maxobj_per_zspage == 1) instead of header of each
object so we could use 4096B-class, not 4104B-class.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Gunho Lee <gunho.lee@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: support compaction

Now that zsmalloc supports compaction, zram can use it.  For the first
step, this patch exports compact knob via sysfs so user can do compaction
via "echo 1 > /sys/block/zram0/compact".

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Gunho Lee <gunho.lee@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: adjust ZS_ALMOST_FULL

Curretly, zsmalloc regards a zspage as ZS_ALMOST_EMPTY if the zspage has
under 1/4 used objects(ie, fullness_threshold_frac).  It could make result
in loose packing since zsmalloc migrates only ZS_ALMOST_EMPTY zspage out.

This patch changes the rule so that zsmalloc makes zspage which has above
3/4 used object ZS_ALMOST_FULL so it could make tight packing.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Gunho Lee <gunho.lee@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: support compaction

This patch provides core functions for migration of zsmalloc.  Migraion
policy is simple as follows.

for each size class {
        while {
                src_page = get zs_page from ZS_ALMOST_EMPTY
                if (!src_page)
                        break;
                dst_page = get zs_page from ZS_ALMOST_FULL
                if (!dst_page)
                        dst_page = get zs_page from ZS_ALMOST_EMPTY
                if (!dst_page)
                        break;
                migrate(from src_page, to dst_page);
        }
}

For migration, we need to identify which objects in zspage are allocated
to migrate them out.  We could know it by iterating of freed objects in a
zspage because first_page of zspage keeps free objects singly-linked list
but it's not efficient.  Instead, this patch adds a tag(ie,
OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check
whether the object is allocated easily.

This patch adds another status bit in handle to synchronize between user
access through zs_map_object and migration.  During migration, we cannot
move objects user are using due to data coherency between old object and
new object.

[akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Gunho Lee <gunho.lee@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: factor out obj_[malloc|free]

In later patch, migration needs some part of functions in zs_malloc and
zs_free so this patch factor out them.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Gunho Lee <gunho.lee@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: decouple handle and object

Recently, we started to use zram heavily and some of issues
popped.

1) external fragmentation

I got a report from Juneho Choi that fork failed although there are plenty
of free pages in the system.  His investigation revealed zram is one of
the culprit to make heavy fragmentation so there was no more contiguous
16K page for pgd to fork in the ARM.

2) non-movable pages

Other problem of zram now is that inherently, user want to use zram as
swap in small memory system so they use zRAM with CMA to use memory
efficiently.  However, unfortunately, it doesn't work well because zRAM
cannot use CMA's movable pages unless it doesn't support compaction.  I
got several reports about that OOM happened with zram although there are
lots of swap space and free space in CMA area.

3) internal fragmentation

zRAM has started support memory limitation feature to limit memory usage
and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be
harmonized with zram-swap to stop anonymous page reclaim if zram consumed
memory up to the limit although there are free space on the swap.  One
problem for that direction is zram has no way to know any hole in memory
space zsmalloc allocated by internal fragmentation so zram would regard
swap is full although there are free space in zsmalloc.  For solving the
issue, zram want to trigger compaction of zsmalloc before it decides full
or not.

This patchset is first step to support above issues.  For that, it adds
indirect layer between handle and object location and supports manual
compaction to solve 3th problem first of all.

After this patchset got merged, next step is to make VM aware of zsmalloc
compaction so that generic compaction will move zsmalloced-pages
automatically in runtime.

In my imaginary experiment(ie, high compress ratio data with heavy swap
in/out on 8G zram-swap), data is as follows,

Before =
zram allocated object :      60212066 bytes
zram total used:     140103680 bytes
ratio:         42.98 percent
MemFree:          840192 kB

Compaction

After =
frag ratio after compaction
zram allocated object :      60212066 bytes
zram total used:      76185600 bytes
ratio:         79.03 percent
MemFree:          901932 kB

Juneho reported below in his real platform with small aging.
So, I think the benefit would be bigger in real aging system
for a long time.

- frag_ratio increased 3% (ie, higher is better)
- memfree increased about 6MB
- In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased

frag ratio after swap fragment
used :        156677 kbytes
total:        166092 kbytes
frag_ratio :  94
meminfo before compaction
MemFree:           83724 kB
Node 0, zone   Normal  13642   1364     57     10     61     17      9      5      4      0      0
Node 0, zone  HighMem    425     29      1      0      0      0      0      0      0      0      0

num_migrated :  23630
compaction done

frag ratio after compaction
used :        156673 kbytes
total:        160564 kbytes
frag_ratio :  97
meminfo after compaction
MemFree:           89060 kB
Node 0, zone   Normal  14076   1544     67     14     61     17      9      5      4      0      0
Node 0, zone  HighMem    863     50      1      0      0      0      0      0      0      0      0

This patchset adds more logics(about 480 lines) in zsmalloc but when I
tested heavy swapin/out program, the regression for swapin/out speed is
marginal because most of overheads were caused by compress/decompress and
other MM reclaim stuff.

This patch (of 7):

Currently, handle of zsmalloc encodes object's location directly so it
makes support of migration hard.

This patch decouples handle and object via adding indirect layer.  For
that, it allocates handle dynamically and returns it to user.  The handle
is the address allocated by slab allocation so it's unique and we could
keep object's location in the memory space allocated for handle.

With it, we can change object's position without changing handle itself.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Gunho Lee <gunho.lee@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/compaction.c: fix "suitable_migration_target() unused" warning

mm/compaction.c:250:13: warning: 'suitable_migration_target' defined but not used [-Wunused-function]

Reported-by: Fengguang Wu <fengguang.wu@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dax: unify ext2/4_{dax,}_file_operations

The original dax patchset split the ext2/4_file_operations because of the
two NULL splice_read/splice_write in the dax case.

In the vfs if splice_read/splice_write are NULL we then call
default_splice_read/write.

What we do here is make generic_file_splice_read aware of IS_DAX() so the
original ext2/4_file_operations can be used as is.

For write it appears that iter_file_splice_write is just fine.  It uses
the regular f_op->write(file,..) or new_sync_write(file, ...).

Signed-off-by: Boaz Harrosh <boaz@plexistor.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dax: use pfn_mkwrite to update c/mtime + freeze protection

From: Yigal Korman <yigal@plexistor.com>

[v1]
Without this patch, c/mtime is not updated correctly when mmap'ed page is
first read from and then written to.

A new xfstest is submitted for testing this (generic/080)

[v2]
Jan Kara has pointed out that if we add the
sb_start/end_pagefault pair in the new pfn_mkwrite we
are then fixing another bug where: A user could start
writing to the page while filesystem is frozen.

Signed-off-by: Yigal Korman <yigal@plexistor.com>
Signed-off-by: Boaz Harrosh <boaz@plexistor.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: new pfn_mkwrite same as page_mkwrite for VM_PFNMAP

This will allow FS that uses VM_PFNMAP | VM_MIXEDMAP (no page structs) to
get notified when access is a write to a read-only PFN.

This can happen if we mmap() a file then first mmap-read from it to
page-in a read-only PFN, than we mmap-write to the same page.

We need this functionality to fix a DAX bug, where in the scenario above
we fail to set ctime/mtime though we modified the file.  An xfstest is
attached to this patchset that shows the failure and the fix.  (A DAX
patch will follow)

This functionality is extra important for us, because upon dirtying of a
pmem page we also want to RDMA the page to a remote cluster node.

We define a new pfn_mkwrite and do not reuse page_mkwrite because
  1 - The name ;-)
  2 - But mainly because it would take a very long and tedious
      audit of all page_mkwrite functions of VM_MIXEDMAP/VM_PFNMAP
      users. To make sure they do not now CRASH. For example current
      DAX code (which this is for) would crash.
      If we would want to reuse page_mkwrite, We will need to first
      patch all users, so to not-crash-on-no-page. Then enable this
      patch. But even if I did that I would not sleep so well at night.
      Adding a new vector is the safest thing to do, and is not that
      expensive. an extra pointer at a static function vector per driver.
      Also the new vector is better for performance, because else we
      Will call all current Kernel vectors, so to:
        check-ha-no-page-do-nothing and return.

No need to call it from do_shared_fault because do_wp_page is called to
change pte permissions anyway.

Signed-off-by: Yigal Korman <yigal@plexistor.com>
Signed-off-by: Boaz Harrosh <boaz@plexistor.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory: also print a_ops->readpage in print_bad_pte()

A lot of filesystems use generic_file_mmap() and filemap_fault(),
f_op->mmap and vm_ops->fault aren't enough to identify filesystem.

This prints file name, vm_ops->fault, f_op->mmap and a_ops->readpage
(which is almost always implemented and filesystem-specific).

Example:

[   23.676410] BUG: Bad page map in process sh  pte:1b7e6025 pmd:19bbd067
[   23.676887] page:ffffea00006df980 count:4 mapcount:1 mapping:ffff8800196426c0 index:0x97
[   23.677481] flags: 0x10000000000000c(referenced|uptodate)
[   23.677896] page dumped because: bad pte
[   23.678205] addr:00007f52fcb17000 vm_flags:00000075 anon_vma:          (null) mapping:ffff8800196426c0 index:97
[   23.678922] file:libc-2.19.so fault:filemap_fault mmap:generic_file_readonly_mmap readpage:v9fs_vfs_readpage

[akpm@linux-foundation.org: use pr_alert, per Kirill]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mempool.c: kasan: poison mempool elements

Mempools keep allocated objects in reserved for situations when ordinary
allocation may not be possible to satisfy.  These objects shouldn't be
accessed before they leave the pool.

This patch poison elements when get into the pool and unpoison when they
leave it.  This will let KASan to detect use-after-free of mempool's
elements.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Tested-by: David Rientjes <rientjes@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Chernenkov <drcheren@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/cma_debug.c: remove blank lines before DEFINE_SIMPLE_ATTRIBUTE()

Like EXPORT_SYMBOL(): the positioning communicates that the macro pertains
to the immediately preceding function.

Cc: Dmitry Safonov <d.safonov@partner.samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Stefan Strogin <stefan.strogin@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pintu Kumar <pintu.k@samsung.com>
Cc: Weijie Yang <weijie.yang@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Vyacheslav Tyrtov <v.tyrtov@samsung.com>
Cc: Aleksei Mateosian <a.mateosian@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: cma: add functions to get region pages counters

Here are two functions that provide interface to compute/get used size and
size of biggest free chunk in cma region.  Add that information to
debugfs.

[akpm@linux-foundation.org: move debug code from cma.c into cma_debug.c]
[stefan.strogin@gmail.com: move code from cma_get_used() and cma_get_maxchunk() to cma_used_get() and cma_maxchunk_get()]
Signed-off-by: Dmitry Safonov <d.safonov@partner.samsung.com>
Signed-off-by: Stefan Strogin <stefan.strogin@gmail.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pintu Kumar <pintu.k@samsung.com>
Cc: Weijie Yang <weijie.yang@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Vyacheslav Tyrtov <v.tyrtov@samsung.com>
Cc: Aleksei Mateosian <a.mateosian@samsung.com>
Signed-off-by: Stefan Strogin <stefan.strogin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: cleanup khugepaged startup

Few trivial cleanups:

 - no need to call set_recommended_min_free_kbytes() from
   late_initcall() -- start_khugepaged() calls it;

 - no need to call set_recommended_min_free_kbytes() from
   start_khugepaged() if khugepaged is not started;

 - there isn't much point in running start_khugepaged() if we've just
   set transparent_hugepage_flags to zero;

 - start_khugepaged() is misnamed -- it also used to stop the thread;

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: uninline and cleanup page-mapping related helpers

Most-used page->mapping helper -- page_mapping() -- has already uninlined.
 Let's uninline also page_rmapping() and page_anon_vma().  It saves us
depending on configuration around 400 bytes in text:

   text    data     bss     dec     hex filename
 660318   99254  410000 1169572  11d8a4 mm/built-in.o-before
 659854   99254  410000 1169108  11d6d4 mm/built-in.o

I also tried to make code a bit more clean.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: cma: add trace events for CMA allocations and freeings

Add trace events for cma_alloc() and cma_release().

The cma_alloc tracepoint is used both for successful and failed allocations,
in case of allocation failure pfn=-1UL is stored and printed.

Signed-off-by: Stefan Strogin <stefan.strogin@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Nazarewicz <mpn@google.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/mm.h: simplify flag check

Flip the flag test so that it is the simplest.  No functional change, just
a small readability improvement:

No code changed:

  # arch/x86/kernel/sys_x86_64.o:

   text    data     bss     dec     hex filename
   1551      24       0    1575     627 sys_x86_64.o.before
   1551      24       0    1575     627 sys_x86_64.o.after

md5:
   70708d1b1ad35cc891118a69dc1a63f9  sys_x86_64.o.before.asm
   70708d1b1ad35cc891118a69dc1a63f9  sys_x86_64.o.after.asm

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memblock.c: add debug output for memblock_add()

memblock_reserve() calls memblock_reserve_region() which prints debugging
information if 'memblock=debug' was passed on the command line.  This
patch adds the same behaviour, but for memblock_add function().

[akpm@linux-foundation.org: s/memblock_memory/memblock_add/ in message]
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Philipp Hachtmann <phacht@linux.vnet.ibm.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Emil Medve <Emilian.Medve@freescale.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: hugetlb: cleanup using paeg_huge_active()

Now we have an easy access to hugepages' activeness, so existing helpers to
get the information can be cleaned up.

[akpm@linux-foundation.org: s/PageHugeActive/page_huge_active/]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: hugetlb: introduce page_huge_active

We are not safe from calling isolate_huge_page() on a hugepage
concurrently, which can make the victim hugepage in invalid state and
results in BUG_ON().

The root problem of this is that we don't have any information on struct
page (so easily accessible) about hugepages' activeness.  Note that
hugepages' activeness means just being linked to
hstate->hugepage_activelist, which is not the same as normal pages'
activeness represented by PageActive flag.

Normal pages are isolated by isolate_lru_page() which prechecks PageLRU
before isolation, so let's do similarly for hugetlb with a new
paeg_huge_active().

set/clear_page_huge_active() should be called within hugetlb_lock.  But
hugetlb_cow() and hugetlb_no_page() don't do this, being justified because
in these functions set_page_huge_active() is called right after the
hugepage is allocated and no other thread tries to isolate it.

[akpm@linux-foundation.org: s/PageHugeActive/page_huge_active/, make it return bool]
[fengguang.wu@intel.com: set_page_huge_active() can be static]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: don't call __page_cache_release for hugetlb

__put_compound_page() calls __page_cache_release() to do some freeing
work, but it's obviously for thps, not for hugetlb.  We don't care because
PageLRU is always cleared and page->mem_cgroup is always NULL for hugetlb.
But it's not correct and has potential risks, so let's make it
conditional.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmap.c: use while instead of if+goto

The creators of the C language gave us the while keyword. Let's use
that instead of synthesizing it from if+goto.

Made possible by 6597d783397a ("mm/mmap.c: replace find_vma_prepare()
with clearer find_vma_links()").

[akpm@linux-foundation.org: fix 80-col overflows]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, selftests: test return value of munmap for MAP_HUGETLB memory

When MAP_HUGETLB memory is unmapped, the length must be hugepage aligned,
otherwise it fails with -EINVAL.

All tests currently behave correctly, but it's better to explcitly test
the return value for completeness and document the requirement, especially
if users copy map_hugetlb.c as a sample implementation.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Eric B Munson <emunson@akamai.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, doc: cleanup and clarify munmap behavior for hugetlb memory

munmap(2) of hugetlb memory requires a length that is hugepage aligned,
otherwise it may fail.  Add this to the documentation.

This also cleans up the documentation and separates it into logical units:
one part refers to MAP_HUGETLB and another part refers to requirements for
shared memory segments.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Eric B Munson <emunson@akamai.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: do not adjust zone water marks if khugepaged is not started

set_recommended_min_free_kbytes() adjusts zone water marks to be suitable
for khugepaged. We avoid doing this if khugepaged is disabled, but don't
catch the case when khugepaged is failed to start.

Let's address this by checking khugepaged_thread instead of
khugepaged_enabled() in set_recommended_min_free_kbytes().
It's NULL if the kernel thread is stopped or failed to start.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: handle errors in hugepage_init() properly

We miss error-handling in few cases hugepage_init(). Let's fix that.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, mempool: poison elements backed by slab allocator

Mempools keep elements in a reserved pool for contexts in which allocation
may not be possible.  When an element is allocated from the reserved pool,
its memory contents is the same as when it was added to the reserved pool.

Because of this, elements lack any free poisoning to detect use-after-free
errors.

This patch adds free poisoning for elements backed by the slab allocator.
This is possible because the mempool layer knows the object size of each
element.

When an element is added to the reserved pool, it is poisoned with
POISON_FREE.  When it is removed from the reserved pool, the contents are
checked for POISON_FREE.  If there is a mismatch, a warning is emitted to
the kernel log.

This is only effective for configs with CONFIG_DEBUG_SLAB or
CONFIG_SLUB_DEBUG_ON.

[fabio.estevam@freescale.com: use '%zu' for printing 'size_t' variable]
[arnd@arndb.de: add missing include]
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, mempool: disallow mempools based on slab caches with constructors

All occurrences of mempools based on slab caches with object constructors
have been removed from the tree, so disallow creating them.

We can only dereference mem->ctor in mm/mempool.c without including
mm/slab.h in include/linux/mempool.h.  So simply note the restriction,
just like the comment restricting usage of __GFP_ZERO, and warn on kernels
with CONFIG_DEBUG_VM() if such a mempool is allocated from.

We don't want to incur this check on every element allocation, so use
VM_BUG_ON().

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs, jfs: remove slab object constructor

Mempools based on slab caches with object constructors are risky because
element allocation can happen either from the slab cache itself, meaning
the constructor is properly called before returning, or from the mempool
reserve pool, meaning the constructor is not called before returning,
depending on the allocation context.

For this reason, we should disallow creating mempools based on slab caches
that have object constructors.  Callers of mempool_alloc() will be
responsible for properly initializing the returned element.

Then, it doesn't matter if the element came from the slab cache or the
mempool reserved pool.

The only occurrence of a mempool being based on a slab cache with an
object constructor in the tree is in fs/jfs/jfs_metapage.c.  Remove it and
properly initialize the element in alloc_metapage().

At the same time, META_free is never used, so remove it as well.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove rest of ACCESS_ONCE() usages

We converted some of the usages of ACCESS_ONCE to READ_ONCE in the mm/
tree since it doesn't work reliably on non-scalar types.

This patch removes the rest of the usages of ACCESS_ONCE, and use the new
READ_ONCE API for the read accesses.  This makes things cleaner, instead
of using separate/multiple sets of APIs.

Signed-off-by: Jason Low <jason.low2@hp.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: use READ_ONCE() for non-scalar types

Commit 38c5ce936a08 ("mm/gup: Replace ACCESS_ONCE with READ_ONCE")
converted ACCESS_ONCE usage in gup_pmd_range() to READ_ONCE, since
ACCESS_ONCE doesn't work reliably on non-scalar types.

This patch also fixes the other ACCESS_ONCE usages in gup_pte_range()
and __get_user_pages_fast() in mm/gup.c

Signed-off-by: Jason Low <jason.low2@hp.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mremap.c: clean up goto just return ERR_PTR

As suggested by Kirill the "goto"s in vma_to_resize aren't necessary, just
change them to explicit return.

Signed-off-by: Derek Che <crquan@ymail.com>
Suggested-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mremap should return -ENOMEM when __vm_enough_memory fail

Recently I straced bash behavior in this dd zero pipe to read test, in
part of testing under vm.overcommit_memory=2 (OVERCOMMIT_NEVER mode):

    # dd if=/dev/zero | read x

The bash sub shell is calling mremap to reallocate more and more memory
untill it finally failed -ENOMEM (I expect), or to be killed by system OOM
killer (which should not happen under OVERCOMMIT_NEVER mode); But the
mremap system call actually failed of -EFAULT, which is a surprise to me,
I think it's supposed to be -ENOMEM?  then I wrote this piece of C code
testing confirmed it: https://gist.github.com/crquan/326bde37e1ddda8effe5

    $ ./remap
    allocated one page @0x7f686bf71000, (PAGE_SIZE: 4096)
    grabbed 7680512000 bytes of memory (1875125 pages) @ 00007f6690993000.
    mremap failed Bad address (14).

The -EFAULT comes from the branch of security_vm_enough_memory_mm failure,
underlyingly it calls __vm_enough_memory which returns only 0 for success
or -ENOMEM; So why vma_to_resize needs to return -EFAULT in this case?
this sounds like a mistake to me.

Some more digging into git history:

1) Before commit 119f657c7 ("RLIMIT_AS checking fix") in May 1 2005
   (pre 2.6.12 days) it was returning -ENOMEM for this failure;

2) but commit 119f657c7 ("untangling do_mremap(), part 1") changed it
   accidentally, to what ever is preserved in local ret, which happened to
   be -EFAULT, in a previous assignment;

3) then in commit 54f5de709 code refactoring, it's explicitly returning
   -EFAULT, should be wrong.

Signed-off-by: Derek Che <crquan@ymail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc: get rid of dirty bitmap inside vmap_block structure

In original implementation of vm_map_ram made by Nick Piggin there were
two bitmaps: alloc_map and dirty_map.  None of them were used as supposed
to be: finding a suitable free hole for next allocation in block.
vm_map_ram allocates space sequentially in block and on free call marks
pages as dirty, so freed space can't be reused anymore.

Actually it would be very interesting to know the real meaning of those
bitmaps, maybe implementation was incomplete, etc.

But long time ago Zhang Yanfei removed alloc_map by these two commits:

  mm/vmalloc.c: remove dead code in vb_alloc
     3fcd76e8028e0be37b02a2002b4f56755daeda06
  mm/vmalloc.c: remove alloc_map from vmap_block
     b8e748b6c32999f221ea4786557b8e7e6c4e4e7a

In this patch I replaced dirty_map with two range variables: dirty min and
max.  These variables store minimum and maximum position of dirty space in
a block, since we need only to know the dirty range, not exact position of
dirty pages.

Why it was made?  Several reasons: at first glance it seems that
vm_map_ram allocator concerns about fragmentation thus it uses bitmaps for
finding free hole, but it is not true.  To avoid complexity seems it is
better to use something simple, like min or max range values.  Secondly,
code also becomes simpler, without iteration over bitmap, just comparing
values in min and max macros.  Thirdly, bitmap occupies up to 1024 bits
(4MB is a max size of a block).  Here I replaced the whole bitmap with two
longs.

Finally vm_unmap_aliases should be slightly faster and the whole
vmap_block structure occupies less memory.

Signed-off-by: Roman Pen <r.peniaev@gmail.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Christoph Lameter <cl@linux.com>
Cc: Gioh Kim <gioh.kim@lge.com>
Cc: Rob Jones <rob.jones@codethink.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>