Luka Perkov [Sun, 27 Oct 2013 16:08:23 +0000 (16:08 +0000)]
mvebu: drop patch that has been upstreamed
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38545
John Crispin [Sat, 26 Oct 2013 12:25:11 +0000 (12:25 +0000)]
ubox: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38541
John Crispin [Sat, 26 Oct 2013 12:24:55 +0000 (12:24 +0000)]
ralink: pinctrl fix for non muxed pins
Pins with no mux option failed to be recognized as gpios.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38540
Hauke Mehrtens [Fri, 25 Oct 2013 21:12:48 +0000 (21:12 +0000)]
brcm47xx: b44: fix error handling for dummy phy creation
When the mdio bus is unregistered the newly created phy will also be
unregistered and freed.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38539
Hauke Mehrtens [Fri, 25 Oct 2013 21:02:13 +0000 (21:02 +0000)]
brcm47xx: b44: add dummy phy device if we do not find any
On some devices with e.g. a BCM2535F switch the second MAC is used, but
we can not find a phy under all addresses between 0 and 31, 0xffffffff
is returned as phy id. If we can not find a phy at the expected address
create a dummy one.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38538
Luka Perkov [Fri, 25 Oct 2013 10:29:49 +0000 (10:29 +0000)]
kernel: add keyboard-imx module
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38537
Florian Fainelli [Fri, 25 Oct 2013 01:48:29 +0000 (01:48 +0000)]
malta: add kernel configuration for 3.12
Boot tested using QEMU
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38536
Florian Fainelli [Fri, 25 Oct 2013 01:48:20 +0000 (01:48 +0000)]
kernel: handle Cavium Octeon Kconfig rename
Upstream commit
9ddebc46 ("MIPS: OCTEON: Rename Kconfig
CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC") renamed a Kconfig
symbol, thus making all MIPS builds ask for this specific Kconfig
symbol, add it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38535
Florian Fainelli [Fri, 25 Oct 2013 01:48:10 +0000 (01:48 +0000)]
buildroot: add lz4 initramfs compression option
LZ4 compression is now available with 3.12 kernels offer it as an
option.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38534
Florian Fainelli [Fri, 25 Oct 2013 01:48:02 +0000 (01:48 +0000)]
include: handle LZ4 compression scheme
Kernel 3.12 now offers LZ4 compression which will make initramfs builds
fail because we do not know how to substitute the relevant config
symbols, fix that.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38533
Florian Fainelli [Fri, 25 Oct 2013 01:47:54 +0000 (01:47 +0000)]
kernel: add some missing 3.12 config symbols
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38532
Florian Fainelli [Fri, 25 Oct 2013 01:47:45 +0000 (01:47 +0000)]
kernel: make kmod-pcnet32 depend on kmod-mii
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38531
Florian Fainelli [Fri, 25 Oct 2013 01:47:32 +0000 (01:47 +0000)]
kernel: add mii library kernel module package
This package is required for network drivers such as pcnet32
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38530
John Crispin [Thu, 24 Oct 2013 14:27:03 +0000 (14:27 +0000)]
procd: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38529
Imre Kaloz [Thu, 24 Oct 2013 13:50:11 +0000 (13:50 +0000)]
preliminary 3.12 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38528
Florian Fainelli [Thu, 24 Oct 2013 00:28:33 +0000 (00:28 +0000)]
buildroot: split Kernel config options to Config-kernel.in
The number of Linux kernel related config options has become quite big
over the past few months, they deserve their own Config-kernel.in file.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38524
Florian Fainelli [Thu, 24 Oct 2013 00:25:52 +0000 (00:25 +0000)]
kernel: make swconfig checkpath compliant
Fix the warnings and errors reported by checkpatch on swconfig.c
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38523
Luka Perkov [Wed, 23 Oct 2013 23:12:59 +0000 (23:12 +0000)]
imx6: ventana boards use kmod-sky2
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38522
Luka Perkov [Wed, 23 Oct 2013 22:55:00 +0000 (22:55 +0000)]
imx6: use more descriptive function name
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38521
Luka Perkov [Wed, 23 Oct 2013 22:54:59 +0000 (22:54 +0000)]
imx6: use more common name for ubi(fs) images
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38520
Luka Perkov [Wed, 23 Oct 2013 22:26:54 +0000 (22:26 +0000)]
imx6: fix pcie interrupt mapping
The interrupt mapping for legacy interrupts was backwards causing interrupts
to be mapped improperly behind a PCIe to PCI bridge (ie GW16082 mezzanine).
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38519
Luka Perkov [Wed, 23 Oct 2013 22:16:12 +0000 (22:16 +0000)]
imx6: add support for building uImage
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38518
Luka Perkov [Wed, 23 Oct 2013 22:16:10 +0000 (22:16 +0000)]
Config.in: add more options when it comes to including kernel image into rootfs
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38517
Luka Perkov [Wed, 23 Oct 2013 22:16:09 +0000 (22:16 +0000)]
build: make MkuImage more generic
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38516
Luka Perkov [Wed, 23 Oct 2013 22:16:08 +0000 (22:16 +0000)]
imx6: enable SATA support
Enable SATA support (for IMX6D/IMX6Q) static in the kernel. It seems there
are some issues causing the driver to not load properly when built as
a module which still need to be worked out.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38515
Luka Perkov [Wed, 23 Oct 2013 22:16:07 +0000 (22:16 +0000)]
imx6: enable cpufreq
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38514
Luka Perkov [Wed, 23 Oct 2013 22:16:06 +0000 (22:16 +0000)]
imx6: enable i2c-dev
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38513
Luka Perkov [Wed, 23 Oct 2013 22:16:05 +0000 (22:16 +0000)]
imx6: remove obsolete files
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38512
Luka Perkov [Wed, 23 Oct 2013 22:16:03 +0000 (22:16 +0000)]
imx6: pcie driver fixups
Add upstream patches needed for PCIe through a switch.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38511
Luka Perkov [Wed, 23 Oct 2013 20:21:27 +0000 (20:21 +0000)]
imx6: fix symlink of dtb files
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38510
Gabor Juhos [Wed, 23 Oct 2013 15:43:26 +0000 (15:43 +0000)]
ar71xx: rename 'nand' subtarget to 'mikrotik'
It is for Mikrotik devices only, rename the subtarget
to reflect that. Also fix the wget2nand script to use
the new image names.
Based on the patch by Stefan Agner:
http://patchwork.openwrt.org/patch/4123/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38509
Gabor Juhos [Wed, 23 Oct 2013 15:43:19 +0000 (15:43 +0000)]
ar71xx: change title and description for NAND subtarget
The nand subtarget supports Mikrotik boards only. Change
the title and the description to reflect that.
Based on the patch by Stefan Agner:
http://patchwork.openwrt.org/patch/4123/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38508
Gabor Juhos [Wed, 23 Oct 2013 15:43:13 +0000 (15:43 +0000)]
ar71xx: remove 'Target/Description' from main Makefile
Ensure that menuconfig shows the correct help text for
subtargets.
Based on the patch by Stefan Agner:
http://patchwork.openwrt.org/patch/4123/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38507
Gabor Juhos [Wed, 23 Oct 2013 12:51:05 +0000 (12:51 +0000)]
kernel: update 3.10 to 3.10.17
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38506
Steven Barth [Wed, 23 Oct 2013 10:31:06 +0000 (10:31 +0000)]
odhcp6c: filter similar RAs spammed by some ISPs
SVN-Revision: 38505
Steven Barth [Wed, 23 Oct 2013 10:25:26 +0000 (10:25 +0000)]
firewall: Improve ubus support
* Use network.interface dump call instead of individual status calls
to reduce overall netifd lookups and invokes to 1 per fw3 process.
* Allow protocol handlers to assign a firewall zone for an interface
in the data section to allow for dynamic firewall zone assignment.
SVN-Revision: 38504
Steven Barth [Wed, 23 Oct 2013 09:30:28 +0000 (09:30 +0000)]
odhcpd: fix cleaning of configuration on reload
SVN-Revision: 38503
Hauke Mehrtens [Tue, 22 Oct 2013 21:01:35 +0000 (21:01 +0000)]
brcm47xx: b44: detect external phy by bit set in DevControl register
Without this patch we treated only phy addr 30 as an external phy, but
there is a register to check that. Now we do not have to try to reset
the switch to check for an external switch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38502
Gabor Juhos [Tue, 22 Oct 2013 19:00:25 +0000 (19:00 +0000)]
x86/generic: remove 3.8 config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38501
Gabor Juhos [Tue, 22 Oct 2013 19:00:22 +0000 (19:00 +0000)]
x86/generic: switch to 3.10.15
Based on 'kernel: update x86 generic to 3.10.13' patch
from http://patchwork.openwrt.org/patch/4129/
Signed-off-by: Ulrich Weber <uw@xyne.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38500
Gabor Juhos [Tue, 22 Oct 2013 19:00:20 +0000 (19:00 +0000)]
x86/generic: add kernel config for 3.10
Based on 'kernel: update x86 generic to 3.10.13' patch
from http://patchwork.openwrt.org/patch/4129/
Signed-off-by: Ulrich Weber <uw@xyne.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38499
Gabor Juhos [Tue, 22 Oct 2013 19:00:19 +0000 (19:00 +0000)]
kernel/3.10: add missing config symbol
Based on 'kernel: update x86 generic to 3.10.13' patch
from http://patchwork.openwrt.org/patch/4129/
Signed-off-by: Ulrich Weber <uw@xyne.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38498
Luka Perkov [Tue, 22 Oct 2013 17:13:18 +0000 (17:13 +0000)]
imx6: make symlinks for dtb's
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38496
Steven Barth [Mon, 21 Oct 2013 10:26:57 +0000 (10:26 +0000)]
6relayd: reduce fallout of RA spamming a bit
SVN-Revision: 38488
Luka Perkov [Mon, 21 Oct 2013 09:53:19 +0000 (09:53 +0000)]
gmp: update to 5.1.3
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38487
Felix Fietkau [Sun, 20 Oct 2013 17:51:17 +0000 (17:51 +0000)]
ath9k: gather entropy from raw ADC I/Q samples (use the least significant bit only)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38486
Gabor Juhos [Sun, 20 Oct 2013 15:59:08 +0000 (15:59 +0000)]
mkfwimage: Increase RSPRO maximum size to 0xF00000 (15 MiB)
RSPRO has 16MiB of Flash, using the following layout:
[ 2.930000] 0x000000000000-0x000000030000 : "RedBoot"
[ 2.940000] 0x000000030000-0x000000130000 : "kernel"
[ 2.950000] 0x000000130000-0x000000ff0000 : "rootfs"
[ 2.960000] 0x000000ff0000-0x000000fff000 : "FIS directory"
[ 2.970000] 0x000000fff000-0x000001000000 : "RedBoot config"
Firmware images contain kernel and rootfs, so they can use up to 0xFF0000 -
0x30000 = 0xFC0000 (15,75MiB) of space. We don't include the RedBoot and FIS
partitions and leave an extra 0xC0000 (768KiB) of space.
This is based on revision 18410 which sets the limit to 0xB00000 (11 MiB).
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38484
Gabor Juhos [Sun, 20 Oct 2013 15:59:05 +0000 (15:59 +0000)]
ar71xx: Fix sysupgrades for Allnet and OpenMesh devices
Both Allnet and OpenMesh sysupgrade uses fw_setenv from uboot-envtools to
change different settings in the uboot environment. uboot-envtools version
2013.01 introduced a filesystem lock "/var/lock/fw_printenv.lock" to guarantee
mutually exclusive access to the uboot environment. But the path /var doesn't
exist on the sysupgrade ramfs.
An upgrade on these devices fails since r36033 ("[package] uboot-envtools:
upgrade to version 2013.01.01") with following messages:
Error opening lock file /var/lock/fw_printenv.lock
failed to update U-Boot environment
Creating the "/var/lock" path before running fw_setenv is therefore a
requirement unless the locking functionality in fw_setenv is removed or
replaced with optional locking.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38483
Gabor Juhos [Sun, 20 Oct 2013 15:59:04 +0000 (15:59 +0000)]
ar71xx: fix WLAN 5 GHz LED init on dir-825-c1
Fixes the 5 GHz LED.
The same function has no effect on the 2.4 GHz LED at all, so we might
as well remove it.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38482
Felix Fietkau [Sat, 19 Oct 2013 16:24:38 +0000 (16:24 +0000)]
libubox: update to latest version, fixes ustream reuse and a few other minor issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38461
Steven Barth [Sat, 19 Oct 2013 11:01:25 +0000 (11:01 +0000)]
netifd: Fix ifupdate events
SVN-Revision: 38458
Luka Perkov [Fri, 18 Oct 2013 23:38:26 +0000 (23:38 +0000)]
cmake: upgrade to 2.8.12
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38457
Steven Barth [Fri, 18 Oct 2013 13:39:48 +0000 (13:39 +0000)]
odhcpd: various bugfixes
SVN-Revision: 38454
Steven Barth [Fri, 18 Oct 2013 13:39:43 +0000 (13:39 +0000)]
netifd: various improvements
* Add ubus methods for global interface status
* Add ubus function to create nested interfaces
* Add protocol update notifications and hotplug legacy calls
* Fix: key to data elements point at wrong memory area
* Add support for source-restricted routes
* Add option "delegate" to toggle prefix delegation
* Reevaluate target routes also on interface update
SVN-Revision: 38453
Felix Fietkau [Fri, 18 Oct 2013 13:39:10 +0000 (13:39 +0000)]
rt2800usb: merge a fix to slow down tx status polling (#13523)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38452
Jo-Philipp Wich [Fri, 18 Oct 2013 11:47:47 +0000 (11:47 +0000)]
wpa_supplicant: fix beacon_int configuration option
wpa_supplicant expects beacon_int instead of beacon_interval in its config
file.
Signed-off-by: Bruno Randolf <br1@einfach.org>
SVN-Revision: 38451
Jo-Philipp Wich [Fri, 18 Oct 2013 11:45:33 +0000 (11:45 +0000)]
x86: fix condition in base-files.mk
TARGET_x86_generic_Soekris48xx is not defined,
CONFIG_TARGET_x86_generic_Soekris48xx is
This changes makes it possible to override the network config for soekris net48xx
and net45xx targets.
Signed-off-by: Bruno Randolf <br1@einfach.org>
SVN-Revision: 38450
Jo-Philipp Wich [Fri, 18 Oct 2013 11:43:02 +0000 (11:43 +0000)]
iw: add patch to support 802.11j frequencies
A similar change was recently merged in iw commit
58b46da26ab9b5ff31c7033e175351eb1301d9af
Signed-off-by: Bruno Randolf <br1@einfach.org>
SVN-Revision: 38449
Jo-Philipp Wich [Fri, 18 Oct 2013 11:42:43 +0000 (11:42 +0000)]
iwinfo: make 'type' visible in wrapped iwinfo
There are several cases within 'luci' that attempt to access the interface
'type' from within the 'type' specific meta tables; however, 'type' is not
currently available there. Replicate the common metadata in the 'type'
specific meta tables.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38448
Luka Perkov [Fri, 18 Oct 2013 00:39:28 +0000 (00:39 +0000)]
uboot-envtools: update to 2013.10
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38444
Luka Perkov [Fri, 18 Oct 2013 00:11:20 +0000 (00:11 +0000)]
build: set owner root for all files on ubifs creation
When creating an image it makes no sense to have files owned by
the uid and gid on the host (and even creates a bug when for
example dropbear authorized_keys is included via env/files).
Signed-off-by: Joris de Vries <joris@apptrician.nl>
SVN-Revision: 38442
Luka Perkov [Fri, 18 Oct 2013 00:02:45 +0000 (00:02 +0000)]
imx6: reorganize build system
Changes include:
* switching to profiles
* adding ubifs support
* building image for GW54XX board
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38441
Steven Barth [Thu, 17 Oct 2013 19:32:28 +0000 (19:32 +0000)]
ipkg-make-index: use more backwards-compatible openssl call for SHA256
SVN-Revision: 38440
Luka Perkov [Thu, 17 Oct 2013 15:45:41 +0000 (15:45 +0000)]
build: drop FIT option until we actually need it
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38439
Felix Fietkau [Thu, 17 Oct 2013 14:03:11 +0000 (14:03 +0000)]
x86: Update kernel for alix2 to 3.10.15
Without this patch, the patch
target/linux/generic/patches-3.10/770-bgmac-backport.patch
would not apply.
Signed-off-by: Tobias Steinicke <tsteinicke@net.t-labs.tu-berlin.de>
SVN-Revision: 38438
Steven Barth [Thu, 17 Oct 2013 13:12:06 +0000 (13:12 +0000)]
netifd: rename customopts to sendopts for consistency
SVN-Revision: 38437
Steven Barth [Thu, 17 Oct 2013 12:55:40 +0000 (12:55 +0000)]
Added 'customopts' dhcp protocol option, which is an array passed along to udhcpc as series of -x options.
Signed-off-by: Markus Stenberg <markus.stenberg@iki.fi>
SVN-Revision: 38436
Felix Fietkau [Thu, 17 Oct 2013 11:57:44 +0000 (11:57 +0000)]
gcc 4.8-linaro: backport an upstream fix to fix asm goto miscompilation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38435
Luka Perkov [Thu, 17 Oct 2013 11:54:52 +0000 (11:54 +0000)]
imx6: fix file names when building images
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38434
Steven Barth [Thu, 17 Oct 2013 07:19:32 +0000 (07:19 +0000)]
odhcp6c: fix parsing of IA_PD adverts
SVN-Revision: 38433
Luka Perkov [Wed, 16 Oct 2013 21:23:27 +0000 (21:23 +0000)]
imx6: enable FIT images
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38432
Luka Perkov [Wed, 16 Oct 2013 21:23:24 +0000 (21:23 +0000)]
build: add menuconfig option for building FIT images
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38431
Luka Perkov [Wed, 16 Oct 2013 10:29:50 +0000 (10:29 +0000)]
build: move mkits.sh script to more common place
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38430
Steven Barth [Wed, 16 Oct 2013 09:03:55 +0000 (09:03 +0000)]
odhcpd: add new experimental dhcp-server
SVN-Revision: 38428
Luka Perkov [Wed, 16 Oct 2013 03:25:59 +0000 (03:25 +0000)]
kernel: imx6: add modules needed for sgtl5000 audio codec
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38427
Luka Perkov [Wed, 16 Oct 2013 03:25:58 +0000 (03:25 +0000)]
imx6: enable fixed voltage reulator
Fixed voltage regulator support is required by several drivers that have
regulator consumers, such as the sgtl5000 audio codec used on many i.MX6
boards.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38426
Luka Perkov [Wed, 16 Oct 2013 03:25:57 +0000 (03:25 +0000)]
imx6: add support for gw52xx
The Gateworks GW51xx family of products is based on the Freescale
i.MX6DL SoC and offers a small form-factor with peripherals such as:
* i.MX6DL 512MB DDR3
* 256MB NAND FLASH
* 2x PCIe
* 1x USB EHCI (to PCIe socket2)
* 1x USB OTG (to front panel or PCIe socket1)
* 1x uSD
* LVDS
* HDMI AudioVideo out
* Analog Video in
* Digital IO
* Gateworks System Controller
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38425
Luka Perkov [Wed, 16 Oct 2013 03:25:55 +0000 (03:25 +0000)]
imx6: dts: update ventana dts
- fix spi chipselect for GW5400-A
- fix audmux pinctrl for GW54xx
- remove unused alias nodes
- remove unused regulator nodes (will be adding pmic nodes next)
- remove duplicate eeprom entries
- add regulator definitions
- fix sgtl5000 regulator reference
- add egalax touchscreen controller interrupt
- fix gw5400-a audmux pinctrl
- fix usb ehci alias
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38424
Luka Perkov [Wed, 16 Oct 2013 03:25:54 +0000 (03:25 +0000)]
imx6: split out ventana init patch from devicetree
SVN-Revision: 38423
Luka Perkov [Wed, 16 Oct 2013 03:25:52 +0000 (03:25 +0000)]
imx6: add pfuze100 regulator support
- backport driver
- apply patch to allow misprogrammed parts
- enable driver in kernel
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38422
Luka Perkov [Wed, 16 Oct 2013 03:25:51 +0000 (03:25 +0000)]
imx6: minor (cosmetic) changes in uci-defaults
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38421
Luka Perkov [Wed, 16 Oct 2013 03:25:49 +0000 (03:25 +0000)]
imx6: add back bootargs
They make our life easier when testing ramdisk images.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38420
Luka Perkov [Tue, 15 Oct 2013 21:37:31 +0000 (21:37 +0000)]
ubifs: remove breaking commas from ubi calls
The extra commas get output by the shell resulting in errors since
the commands that get called with those extra commas are then
malformed.
Signed-off-by: Joris de Vries <joris@apptrician.nl>
SVN-Revision: 38419
John Crispin [Tue, 15 Oct 2013 14:56:49 +0000 (14:56 +0000)]
ralink: fix default vlan mapping for MT7620a_MT7610e
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38418
Jo-Philipp Wich [Tue, 15 Oct 2013 13:10:32 +0000 (13:10 +0000)]
dropbear: add dropbear.nl mirror, provided by dropbear maintainer
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
SVN-Revision: 38413
Luka Perkov [Tue, 15 Oct 2013 12:42:58 +0000 (12:42 +0000)]
openvpn: make comp_lzo a parameter
Possible parameters are yes, no and adaptive. See manpage for more information.
Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>
SVN-Revision: 38412
Jo-Philipp Wich [Tue, 15 Oct 2013 12:23:21 +0000 (12:23 +0000)]
openvpn-easy-rsa: restore essential patch to make it actually work on the target (#14324)
SVN-Revision: 38411
Luka Perkov [Tue, 15 Oct 2013 11:32:28 +0000 (11:32 +0000)]
uci: upgrade to latest git version
Fixes issues with UBIFS file system when due to unclean shutdown files would
end up with size 0. Furthermore, few style fixes are included too.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38410
Felix Fietkau [Tue, 15 Oct 2013 11:20:06 +0000 (11:20 +0000)]
mpc85xx: revert the napi polling code to the one from an older kernel version to fix stability issues (#14020)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38409
Zoltan Herpai [Mon, 14 Oct 2013 22:43:50 +0000 (22:43 +0000)]
imx23: build DCP crypto co-processor support by default
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38408
Zoltan Herpai [Mon, 14 Oct 2013 21:22:40 +0000 (21:22 +0000)]
mxs: add support for I2SE Duckbill devices
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38407
Zoltan Herpai [Mon, 14 Oct 2013 21:00:01 +0000 (21:00 +0000)]
mxs: improve image generation support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38406
Zoltan Herpai [Mon, 14 Oct 2013 19:53:06 +0000 (19:53 +0000)]
mxs: enable device tree support in /proc
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38405
Luka Perkov [Mon, 14 Oct 2013 19:46:45 +0000 (19:46 +0000)]
kirkwood: drop 3.3.x kernel version
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38404
Luka Perkov [Mon, 14 Oct 2013 19:46:43 +0000 (19:46 +0000)]
uboot-envtools: update kirkwood scripts
Also, scripts can be installed as data so let's change that here too.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38403
Luka Perkov [Mon, 14 Oct 2013 19:46:40 +0000 (19:46 +0000)]
kirkwood: upgrade to 3.10.15
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38402
Zoltan Herpai [Mon, 14 Oct 2013 19:45:31 +0000 (19:45 +0000)]
elftosb: support static linking
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38400
Felix Fietkau [Mon, 14 Oct 2013 19:40:30 +0000 (19:40 +0000)]
rt2x00: fix rf id for rt3352 (#14322)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38399
Felix Fietkau [Mon, 14 Oct 2013 19:38:42 +0000 (19:38 +0000)]
ath9k: add some more pending fixes / optimizations
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38398
Felix Fietkau [Mon, 14 Oct 2013 19:20:05 +0000 (19:20 +0000)]
ath5k: fix tx status processing errors (causing packet loss and throughput issues)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38396
projects / openwrt / staging / yousong.git / log