io_uring: fix sequence logic for timeout requests

We have two ways a request can be deferred:

1) It's a regular request that depends on another one
2) It's a timeout that tracks completions

We have a shared helper to determine whether to defer, and that
attempts to make the right decision based on the request. But we
only have some of this information in the caller. Un-share the
two timeout/defer helpers so the caller can use the right one.

Fixes: 5262f567987d ("io_uring: IORING_OP_TIMEOUT support")
Reported-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nbd: fix possible sysfs duplicate warning

1. nbd_put takes the mutex and drops nbd->ref to 0. It then does
idr_remove and drops the mutex.

2. nbd_genl_connect takes the mutex. idr_find/idr_for_each fails
to find an existing device, so it does nbd_dev_add.

3. just before the nbd_put could call nbd_dev_remove or not finished
totally, but if nbd_dev_add try to add_disk, we can hit:

debugfs: Directory 'nbd1' with parent 'block' already present!

This patch will make sure all the disk add/remove stuff are done
by holding the nbd_index_mutex lock.

Reported-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

null_blk: Fix zoned command return code

The return code from null_handle_zoned() sets the cmd->error value.
Returning OK status when an error occured overwrites the intended
cmd->error. Return the appropriate error code instead of setting the
error in the cmd.

Fixes: fceb5d1b19cbe626 ("null_blk: create a helper for zoned devices")
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: only flush workqueues on fileset removal

We should not remove the workqueue, we just need to ensure that the
workqueues are synced. The workqueues are torn down on ctx removal.

Cc: stable@vger.kernel.org
Fixes: 6b06314c47e1 ("io_uring: add file set registration")
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: remove wait loop spurious wakeups

Any changes interesting to tasks waiting in io_cqring_wait() are
commited with io_cqring_ev_posted(). However, io_ring_drop_ctx_refs()
also tries to do that but with no reason, that means spurious wakeups
every io_free_req() and io_uring_enter().

Just use percpu_ref_put() instead.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-wbt: fix performance regression in wbt scale_up/scale_down

scale_up wakes up waiters after scaling up. But after scaling max, it
should not wake up more waiters as waiters will not have anything to
do. This patch fixes this by making scale_up (and also scale_down)
return when threshold is reached.

This bug causes increased fdatasync latency when fdatasync and dd
conv=sync are performed in parallel on 4.19 compared to 4.14. This
bug was introduced during refactoring of blk-wbt code.

Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt")
Cc: stable@vger.kernel.org
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Revert "libata, freezer: avoid block device removal while system is frozen"

This reverts commit 85fbd722ad0f5d64d1ad15888cd1eb2188bfb557.

The commit was added as a quick band-aid for a hang that happened when a
block device was removed during system suspend. Now that bdi_wq is not
freezable anymore the hang should not be possible and we can get rid of
this hack by reverting it.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bdi: Do not use freezable workqueue

A removable block device, such as NVMe or SSD connected over Thunderbolt
can be hot-removed any time including when the system is suspended. When
device is hot-removed during suspend and the system gets resumed, kernel
first resumes devices and then thaws the userspace including freezable
workqueues. What happens in that case is that the NVMe driver notices
that the device is unplugged and removes it from the system. This ends
up calling bdi_unregister() for the gendisk which then schedules
wb_workfn() to be run one more time.

However, since the bdi_wq is still frozen flush_delayed_work() call in
wb_shutdown() blocks forever halting system resume process. User sees
this as hang as nothing is happening anymore.

Triggering sysrq-w reveals this:

  Workqueue: nvme-wq nvme_remove_dead_ctrl_work [nvme]
  Call Trace:
   ? __schedule+0x2c5/0x630
   ? wait_for_completion+0xa4/0x120
   schedule+0x3e/0xc0
   schedule_timeout+0x1c9/0x320
   ? resched_curr+0x1f/0xd0
   ? wait_for_completion+0xa4/0x120
   wait_for_completion+0xc3/0x120
   ? wake_up_q+0x60/0x60
   __flush_work+0x131/0x1e0
   ? flush_workqueue_prep_pwqs+0x130/0x130
   bdi_unregister+0xb9/0x130
   del_gendisk+0x2d2/0x2e0
   nvme_ns_remove+0xed/0x110 [nvme_core]
   nvme_remove_namespaces+0x96/0xd0 [nvme_core]
   nvme_remove+0x5b/0x160 [nvme]
   pci_device_remove+0x36/0x90
   device_release_driver_internal+0xdf/0x1c0
   nvme_remove_dead_ctrl_work+0x14/0x30 [nvme]
   process_one_work+0x1c2/0x3f0
   worker_thread+0x48/0x3e0
   kthread+0x100/0x140
   ? current_work+0x30/0x30
   ? kthread_park+0x80/0x80
   ret_from_fork+0x35/0x40

This is not limited to NVMes so exactly same issue can be reproduced by
hot-removing SSD (over Thunderbolt) while the system is suspended.

Prevent this from happening by removing WQ_FREEZABLE from bdi_wq.

Reported-by: AceLan Kao <acelan.kao@canonical.com>
Link: https://marc.info/?l=linux-kernel&m=138695698516487
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204385
Link: https://lore.kernel.org/lkml/20191002122136.GD2819@lahna.fi.intel.com/#t
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: fix reversed nonblock flag for link submission

io_queue_link_head() accepts @force_nonblock flag, but io_ring_submit()
passes something opposite.

Fixes: c576666863b78 ("io_uring: optimize submit_and_wait API")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: sed-opal: fix sparse warning: convert __be64 data

sparse warns about incorrect type when using __be64 data.
It is not being converted to CPU-endian but it should be.

Fixes these sparse warnings:

../block/sed-opal.c:375:20: warning: incorrect type in assignment (different base types)
../block/sed-opal.c:375:20:    expected unsigned long long [usertype] align
../block/sed-opal.c:375:20:    got restricted __be64 const [usertype] alignment_granularity
../block/sed-opal.c:376:25: warning: incorrect type in assignment (different base types)
../block/sed-opal.c:376:25:    expected unsigned long long [usertype] lowest_lba
../block/sed-opal.c:376:25:    got restricted __be64 const [usertype] lowest_aligned_lba

Fixes: 455a7b238cd6 ("block: Add Sed-opal library")
Cc: Scott Bauer <scott.bauer@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: linux-block@vger.kernel.org
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: sed-opal: fix sparse warning: obsolete array init.

Fix sparse warning: (missing '=')
../block/sed-opal.c:133:17: warning: obsolete array initializer, use C99 syntax

Fixes: ff91064ea37c ("block: sed-opal: check size of shadow mbr")
Cc: linux-block@vger.kernel.org
Cc: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Cc: David Kozub <zub@linux.fjfi.cvut.cz>
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: pg: add header include guard

Add a header include guard just in case.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Revert "s390/dasd: Add discard support for ESE volumes"

This reverts commit 7e64db1597fe114b83fe17d0ba96c6aa5fca419a.

The thin provisioning feature introduces an IOCTL and the discard support
to allow userspace tools and filesystems to release unused and previously
allocated space respectively.

During some internal performance improvements and further tests, the
release of allocated space revealed some issues that may lead to data
corruption in some configurations when filesystems are mounted with
discard support enabled.

While we're working on a fix and trying to clarify the situation,
this commit reverts the discard support for ESE volumes to prevent
potential data corruption.

Cc: <stable@vger.kernel.org> # 5.3
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd: Fix error handling during online processing

It is possible that the CCW commands for reading volume and extent pool
information are not supported, either by the storage server (for
dedicated DASDs) or by z/VM (for virtual devices, such as MDISKs).

As a command reject will occur in such a case, the current error
handling leads to a failing online processing and thus the DASD can't be
used at all.

Since the data being read is not essential for an fully operational
DASD, the error handling can be removed. Information about the failing
command is sent to the s390dbf debug feature.

Fixes: c729696bcf8b ("s390/dasd: Recognise data for ESE volumes")
Cc: <stable@vger.kernel.org> # 5.3
Reported-by: Frank Heimes <frank.heimes@canonical.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: use __kernel_timespec in timeout ABI

All system calls use struct __kernel_timespec instead of the old struct
timespec, but this one was just added with the old-style ABI. Change it
now to enforce the use of __kernel_timespec, avoiding ABI confusion and
the need for compat handlers on 32-bit architectures.

Any user space caller will have to use __kernel_timespec now, but this
is unambiguous and works for any C library regardless of the time_t
definition. A nicer way to specify the timeout would have been a less
ambiguous 64-bit nanosecond value, but I suppose it's too late now to
change that as this would impact both 32-bit and 64-bit users.

Fixes: 5262f567987d ("io_uring: IORING_OP_TIMEOUT support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

loop: change queue block size to match when using DIO

The loop driver assumes that if the passed in fd is opened with
O_DIRECT, the caller wants to use direct I/O on the loop device.
However, if the underlying block device has a different block size than
the loop block queue, direct I/O can't be enabled. Instead of requiring
userspace to manually change the blocksize and re-enable direct I/O,
just change the queue block sizes to match, as well as the io_min size.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'nvme-5.4' of git://git.infradead.org/nvme into for-linus

Pull NVMe changes from Sagi:

"This set consists of various fixes and cleanups:
 - controller removal race fix from Balbir
 - quirk additions from Gabriel and Jian-Hong
 - nvme-pci power state save fix from Mario
 - Add 64bit user commands (for 64bit registers) from Marta
 - nvme-rdma/nvme-tcp fixes from Max, Mark and Me
 - Minor cleanups and nits from James, Dan and John"

* 'nvme-5.4' of git://git.infradead.org/nvme:
  nvme-rdma: fix possible use-after-free in connect timeout
  nvme: Move ctrl sqsize to generic space
  nvme: Add ctrl attributes for queue_count and sqsize
  nvme: allow 64-bit results in passthru commands
  nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T
  nvmet-tcp: remove superflous check on request sgl
  Added QUIRKs for ADATA XPG SX8200 Pro 512GB
  nvme-rdma: Fix max_hw_sectors calculation
  nvme: fix an error code in nvme_init_subsystem()
  nvme-pci: Save PCI state before putting drive into deepest state
  nvme-tcp: fix wrong stop condition in io_work
  nvme-pci: Fix a race in controller removal
  nvmet: change ppl to lpp

blk-mq: apply normal plugging for HDD

Some HDD drive may expose multiple hardware queues, such as MegraRaid.
Let's apply the normal plugging for such devices because sequential IO
may benefit a lot from plug merging.

Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: honor IO scheduler for multiqueue devices

If a device is using multiple queues, the IO scheduler may be bypassed.
This may hurt performance for some slow MQ devices, and it also breaks
zoned devices which depend on mq-deadline for respecting the write order
in one zone.

Don't bypass io scheduler if we have one setup.

This patch can double sequential write performance basically on MQ
scsi_debug when mq-deadline is applied.

Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvme-rdma: fix possible use-after-free in connect timeout

If the connect times out, we may have already destroyed the
queue in the timeout handler, so test if the queue is still
allocated in the connect error handler.

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

block: fix null pointer dereference in blk_mq_rq_timed_out()

We got a null pointer deference BUG_ON in blk_mq_rq_timed_out()
as following:

[  108.825472] BUG: kernel NULL pointer dereference, address: 0000000000000040
[  108.827059] PGD 0 P4D 0
[  108.827313] Oops: 0000 [#1] SMP PTI
[  108.827657] CPU: 6 PID: 198 Comm: kworker/6:1H Not tainted 5.3.0-rc8+ #431
[  108.829503] Workqueue: kblockd blk_mq_timeout_work
[  108.829913] RIP: 0010:blk_mq_check_expired+0x258/0x330
[  108.838191] Call Trace:
[  108.838406]  bt_iter+0x74/0x80
[  108.838665]  blk_mq_queue_tag_busy_iter+0x204/0x450
[  108.839074]  ? __switch_to_asm+0x34/0x70
[  108.839405]  ? blk_mq_stop_hw_queue+0x40/0x40
[  108.839823]  ? blk_mq_stop_hw_queue+0x40/0x40
[  108.840273]  ? syscall_return_via_sysret+0xf/0x7f
[  108.840732]  blk_mq_timeout_work+0x74/0x200
[  108.841151]  process_one_work+0x297/0x680
[  108.841550]  worker_thread+0x29c/0x6f0
[  108.841926]  ? rescuer_thread+0x580/0x580
[  108.842344]  kthread+0x16a/0x1a0
[  108.842666]  ? kthread_flush_work+0x170/0x170
[  108.843100]  ret_from_fork+0x35/0x40

The bug is caused by the race between timeout handle and completion for
flush request.

When timeout handle function blk_mq_rq_timed_out() try to read
'req->q->mq_ops', the 'req' have completed and reinitiated by next
flush request, which would call blk_rq_init() to clear 'req' as 0.

After commit 12f5b93145 ("blk-mq: Remove generation seqeunce"),
normal requests lifetime are protected by refcount. Until 'rq->ref'
drop to zero, the request can really be free. Thus, these requests
cannot been reused before timeout handle finish.

However, flush request has defined .end_io and rq->end_io() is still
called even if 'rq->ref' doesn't drop to zero. After that, the 'flush_rq'
can be reused by the next flush request handle, resulting in null
pointer deference BUG ON.

We fix this problem by covering flush request with 'rq->ref'.
If the refcount is not zero, flush_end_io() return and wait the
last holder recall it. To record the request status, we add a new
entry 'rq_status', which will be used in flush_end_io().

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: stable@vger.kernel.org # v4.18+
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
-------
v2:
 - move rq_status from struct request to struct blk_flush_queue
v3:
 - remove unnecessary '{}' pair.
v4:
 - let spinlock to protect 'fq->rq_status'
v5:
 - move rq_status after flush_running_idx member of struct blk_flush_queue
Signed-off-by: Jens Axboe <axboe@kernel.dk>

rq-qos: get rid of redundant wbt_update_limits()

We have updated limits after calling wbt_set_min_lat(). No need to
update again.

Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvme: Move ctrl sqsize to generic space

This isn't specific to fabrics.

Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

iocost: bump up default latency targets for hard disks

The default hard disk param sets latency targets at 50ms.  As the
default target percentiles are zero, these don't directly regulate
vrate; however, they're still used to calculate the period length -
100ms in this case.

This is excessively low.  A SATA drive with QD32 saturated with random
IOs can easily reach avg completion latency of several hundred msecs.
A period duration which is substantially lower than avg completion
latency can lead to wildly fluctuating vrate.

Let's bump up the default latency targets to 250ms so that the period
duration is sufficiently long.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

iocost: improve nr_lagging handling

Some IOs may span multiple periods.  As latencies are collected on
completion, the inbetween periods won't register them and may
incorrectly decide to increase vrate.  nr_lagging tracks these IOs to
avoid those situations.  Currently, whenever there are IOs which are
spanning from the previous period, busy_level is reset to 0 if
negative thus suppressing vrate increase.

This has the following two problems.

* When latency target percentiles aren't set, vrate adjustment should
  only be governed by queue depth depletion; however, the current code
  keeps nr_lagging active which pulls in latency results and can keep
  down vrate unexpectedly.

* When lagging condition is detected, it resets the entire negative
  busy_level.  This turned out to be way too aggressive on some
  devices which sometimes experience extended latencies on a small
  subset of commands.  In addition, a lagging IO will be accounted as
  latency target miss on completion anyway and resetting busy_level
  amplifies its impact unnecessarily.

This patch fixes the above two problems by disabling nr_lagging
counting when latency target percentiles aren't set and blocking vrate
increases when there are lagging IOs while leaving busy_level as-is.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

iocost: better trace vrate changes

vrate_adj tracepoint traces vrate changes; however, it does so only
when busy_level is non-zero.  busy_level turning to zero can sometimes
be as interesting an event.  This patch also enables vrate_adj
tracepoint on other vrate related events - busy_level changes and
non-zero nr_lagging.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: don't release queue's sysfs lock during switching elevator

cecf5d87ff20 ("block: split .sysfs_lock into two locks") starts to
release & acquire sysfs_lock before registering/un-registering elevator
queue during switching elevator for avoiding potential deadlock from
showing & storing 'queue/iosched' attributes and removing elevator's
kobject.

Turns out there isn't such deadlock because 'q->sysfs_lock' isn't
required in .show & .store of queue/iosched's attributes, and just
elevator's sysfs lock is acquired in elv_iosched_store() and
elv_iosched_show(). So it is safe to hold queue's sysfs lock when
registering/un-registering elevator queue.

The biggest issue is that commit cecf5d87ff20 assumes that concurrent
write on 'queue/scheduler' can't happen. However, this assumption isn't
true, because kernfs_fop_write() only guarantees that concurrent write
aren't called on the same open file, but the write could be from
different open on the file. So we can't release & re-acquire queue's
sysfs lock during switching elevator, otherwise use-after-free on
elevator could be triggered.

Fixes the issue by not releasing queue's sysfs lock during switching
elevator.

Fixes: cecf5d87ff20 ("block: split .sysfs_lock into two locks")
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: move lockdep_assert_held() into elevator_exit

Commit c48dac137a62 ("block: don't hold q->sysfs_lock in elevator_init_mq")
removes q->sysfs_lock from elevator_init_mq(), but forgot to deal with
lockdep_assert_held() called in blk_mq_sched_free_requests() which is
run in failure path of elevator_init_mq().

blk_mq_sched_free_requests() is called in the following 3 functions:

elevator_init_mq()
elevator_exit()
blk_cleanup_queue()

In blk_cleanup_queue(), blk_mq_sched_free_requests() is followed exactly
by 'mutex_lock(&q->sysfs_lock)'.

So moving the lockdep_assert_held() from blk_mq_sched_free_requests()
into elevator_exit() for fixing the report by syzbot.

Reported-by: syzbot+da3b7677bb913dc1b737@syzkaller.appspotmail.com
Fixed: c48dac137a62 ("block: don't hold q->sysfs_lock in elevator_init_mq")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvme: Add ctrl attributes for queue_count and sqsize

Current controller interrogation requires a lot of guesswork
on how many io queues were created and what the io sq size is.
The numbers are dependent upon core/fabric defaults, connect
arguments, and target responses.

Add sysfs attributes for queue_count and sqsize.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

nvme: allow 64-bit results in passthru commands

It is not possible to get 64-bit results from the passthru commands,
what prevents from getting for the Capabilities (CAP) property value.

As a result, it is not possible to implement IOL's NVMe Conformance
test 4.3 Case 1 for Fabrics targets [1] (page 123).

This issue has been already discussed [2], but without a solution.

This patch solves the problem by adding new ioctls with a new
passthru structure, including 64-bit results. The older ioctls stay
unchanged.

[1] https://www.iol.unh.edu/sites/default/files/testsuites/nvme/UNH-IOL_NVMe_Conformance_Test_Suite_v11.0.pdf
[2] http://lists.infradead.org/pipermail/linux-nvme/2018-June/018791.html

Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T

Kingston NVME SSD with firmware version E8FK11.T has no interrupt after
resume with actions related to suspend to idle. This patch applied
NVME_QUIRK_SIMPLE_SUSPEND quirk to fix this issue.

Fixes: d916b1be94b6 ("nvme-pci: use host managed power state for suspend")
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204887
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

nvmet-tcp: remove superflous check on request sgl

Now that sgl_free is null safe, drop the superflous check.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

Added QUIRKs for ADATA XPG SX8200 Pro 512GB

Booting with default_ps_max_latency_us >6000 makes the device fail.
Also SUBNQN is NULL and gives a warning on each boot/resume.
 $ nvme id-ctrl /dev/nvme0 | grep ^subnqn
   subnqn    : (null)

I use this device with an Acer Nitro 5 (AN515-43-R8BF) Laptop.
To be sure is not a Laptop issue only, I tested the device on
my server board  with the same results.
( with 2x,4x link on the board and 4x link on a PCI-E card ).

Signed-off-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

nvme-rdma: Fix max_hw_sectors calculation

By default, the NVMe/RDMA driver should support max io_size of 1MiB (or
upto the maximum supported size by the HCA). Currently, one will see that
/sys/class/block/<bdev>/queue/max_hw_sectors_kb is 1020 instead of 1024.

A non power of 2 value can cause performance degradation due to
unnecessary splitting of IO requests and unoptimized allocation units.

The number of pages per MR has been fixed here, so there is no longer any
need to reduce max_sectors by 1.

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

nvme: fix an error code in nvme_init_subsystem()

"ret" should be a negative error code here, but it's either success or
possibly uninitialized.

Fixes: 32fd90c40768 ("nvme: change locking for the per-subsystem controller list")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

nvme-pci: Save PCI state before putting drive into deepest state

The action of saving the PCI state will cause numerous PCI configuration
space reads which depending upon the vendor implementation may cause
the drive to exit the deepest NVMe state.

In these cases ASPM will typically resolve the PCIe link state and APST
may resolve the NVMe power state.  However it has also been observed
that this register access after quiesced will cause PC10 failure
on some device combinations.

To resolve this, move the PCI state saving to before SetFeatures has been
called.  This has been proven to resolve the issue across a 5000 sample
test on previously failing disk/system combinations.

Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

nvme-tcp: fix wrong stop condition in io_work

Allow the do/while statement to continue if current time
is not after the proposed time 'deadline'. Intent is to
allow loop to proceed for a specific time period. Currently
the loop, as coded, will exit after first pass.

Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

Merge tag 'ceph-for-5.4-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "The highlights are:

   - automatic recovery of a blacklisted filesystem session (Zheng Yan).
     This is disabled by default and can be enabled by mounting with the
     new "recover_session=clean" option.

   - serialize buffered reads and O_DIRECT writes (Jeff Layton). Care is
     taken to avoid serializing O_DIRECT reads and writes with each
     other, this is based on the exclusion scheme from NFS.

   - handle large osdmaps better in the face of fragmented memory
     (myself)

   - don't limit what security.* xattrs can be get or set (Jeff Layton).
     We were overly restrictive here, unnecessarily preventing things
     like file capability sets stored in security.capability from
     working.

   - allow copy_file_range() within the same inode and across different
     filesystems within the same cluster (Luis Henriques)"

* tag 'ceph-for-5.4-rc1' of git://github.com/ceph/ceph-client: (41 commits)
  ceph: call ceph_mdsc_destroy from destroy_fs_client
  libceph: use ceph_kvmalloc() for osdmap arrays
  libceph: avoid a __vmalloc() deadlock in ceph_kvmalloc()
  ceph: allow object copies across different filesystems in the same cluster
  ceph: include ceph_debug.h in cache.c
  ceph: move static keyword to the front of declarations
  rbd: pull rbd_img_request_create() dout out into the callers
  ceph: reconnect connection if session hang in opening state
  libceph: drop unused con parameter of calc_target()
  ceph: use release_pages() directly
  rbd: fix response length parameter for encoded strings
  ceph: allow arbitrary security.* xattrs
  ceph: only set CEPH_I_SEC_INITED if we got a MAC label
  ceph: turn ceph_security_invalidate_secctx into static inline
  ceph: add buffered/direct exclusionary locking for reads and writes
  libceph: handle OSD op ceph_pagelist_append() errors
  ceph: don't return a value from void function
  ceph: don't freeze during write page faults
  ceph: update the mtime when truncating up
  ceph: fix indentation in __get_snap_name()
  ...

Merge tag 'fuse-update-5.4' of git://git./linux/kernel/git/mszeredi/fuse

Pull fuse updates from Miklos Szeredi:

 - Continue separating the transport (user/kernel communication) and the
   filesystem layers of fuse. Getting rid of most layering violations
   will allow for easier cleanup and optimization later on.

 - Prepare for the addition of the virtio-fs filesystem. The actual
   filesystem will be introduced by a separate pull request.

 - Convert to new mount API.

 - Various fixes, optimizations and cleanups.

* tag 'fuse-update-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (55 commits)
  fuse: Make fuse_args_to_req static
  fuse: fix memleak in cuse_channel_open
  fuse: fix beyond-end-of-page access in fuse_parse_cache()
  fuse: unexport fuse_put_request
  fuse: kmemcg account fs data
  fuse: on 64-bit store time in d_fsdata directly
  fuse: fix missing unlock_page in fuse_writepage()
  fuse: reserve byteswapped init opcodes
  fuse: allow skipping control interface and forced unmount
  fuse: dissociate DESTROY from fuseblk
  fuse: delete dentry if timeout is zero
  fuse: separate fuse device allocation and installation in fuse_conn
  fuse: add fuse_iqueue_ops callbacks
  fuse: extract fuse_fill_super_common()
  fuse: export fuse_dequeue_forget() function
  fuse: export fuse_get_unique()
  fuse: export fuse_send_init_request()
  fuse: export fuse_len_args()
  fuse: export fuse_end_request()
  fuse: fix request limit
  ...

Merge tag 'tpmdd-next-20190925' of git://git.infradead.org/users/jjs/linux-tpmdd

Pull tpm fixes from Jarkko Sakkinen.

* tag 'tpmdd-next-20190925' of git://git.infradead.org/users/jjs/linux-tpmdd:
  tpm: Wrap the buffer from the caller to tpm_buf in tpm_send()
  MAINTAINERS: keys: Update path to trusted.h
  KEYS: trusted: correctly initialize digests and fix locking issue
  selftests/tpm2: Add log and *.pyc to .gitignore
  selftests/tpm2: Add the missing TEST_FILES assignment

Merge tag 'iomap-5.4-merge-6' of git://git./fs/xfs/xfs-linux

Pull iomap updates from Darrick Wong:
 "After last week's failed pull request attempt, I scuttled everything
  in the branch except for the directio endio api changes, which were
  trivial. Everything else will simply have to wait for the next cycle.

  Summary:

   - Report both io errors and short io results to the directio endio
     handler.

   - Allow directio callers to pass an ops structure to iomap_dio_rw"

* tag 'iomap-5.4-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: move the iomap_dio_rw ->end_io callback into a structure
  iomap: split size and error for iomap_dio_rw ->end_io

Merge branch 'i2c/for-5.4' of git://git./linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - new driver for ICY, an Amiga Zorro card :)

 - axxia driver gained slave mode support, NXP driver gained ACPI

 - the slave EEPROM backend gained 16 bit address support

 - and lots of regular driver updates and reworks

* 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
  i2c: tegra: Move suspend handling to NOIRQ phase
  i2c: imx: ACPI support for NXP i2c controller
  i2c: uniphier(-f): remove all dev_dbg()
  i2c: uniphier(-f): use devm_platform_ioremap_resource()
  i2c: slave-eeprom: Add comment about address handling
  i2c: exynos5: Remove IRQF_ONESHOT
  i2c: stm32f7: Make structure stm32f7_i2c_algo constant
  i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe
  i2c-eeprom_slave: Add support for more eeprom models
  i2c: fsi: Add of_put_node() before break
  i2c: synquacer: Make synquacer_i2c_ops constant
  i2c: hix5hd2: Remove IRQF_ONESHOT
  i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond
  watchdog: iTCO: Add support for Cannon Lake PCH iTCO
  i2c: iproc: Make bcm_iproc_i2c_quirks constant
  i2c: iproc: Add full name of devicetree node to adapter name
  i2c: piix4: Add ACPI support
  i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h
  i2c: ocores: use request_any_context_irq() to register IRQ handler
  i2c: designware: Fix optional reset error handling
  ...

Merge tag 'sound-fix-5.4-rc1' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A few small remaining wrap-up for this merge window.

  Most of patches are device-specific (HD-audio and USB-audio quirks,
  FireWire, pcm316a, fsl, rsnd, Atmel, and TI fixes), while there is a
  simple fix (actually two commits) for ASoC core"

* tag 'sound-fix-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Add DSD support for EVGA NU Audio
  ALSA: hda - Add laptop imic fixup for ASUS M9V laptop
  ASoC: ti: fix SND_SOC_DM365_VOICE_CODEC dependencies
  ASoC: pcm3168a: The codec does not support S32_LE
  ASoC: core: use list_del_init and move it back to soc_cleanup_component
  ALSA: hda/realtek - PCI quirk for Medion E4254
  ALSA: hda - Apply AMD controller workaround for Raven platform
  ASoC: rsnd: do error check after rsnd_channel_normalization()
  ASoC: atmel_ssc_dai: Remove wrong spinlock usage
  ASoC: core: delete component->card_list in soc_remove_component only
  ASoC: fsl_sai: Fix noise when using EDMA
  ALSA: usb-audio: Add Hiby device family to quirks for native DSD support
  ALSA: hda/realtek - Fix alienware headset mic
  ALSA: dice: fix wrong packet parameter for Alesis iO26

tpm: Wrap the buffer from the caller to tpm_buf in tpm_send()

tpm_send() does not give anymore the result back to the caller. This
would require another memcpy(), which kind of tells that the whole
approach is somewhat broken. Instead, as Mimi suggested, this commit
just wraps the data to the tpm_buf, and thus the result will not go to
the garbage.

Obviously this assumes from the caller that it passes large enough
buffer, which makes the whole API somewhat broken because it could be
different size than @buflen but since trusted keys is the only module
using this API right now I think that this fix is sufficient for the
moment.

In the near future the plan is to replace the parameters with a tpm_buf
created by the caller.

Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 412eb585587a ("use tpm_buf in tpm_transmit_cmd() as the IO parameter")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>

MAINTAINERS: keys: Update path to trusted.h

Update MAINTAINERS record to reflect that trusted.h
was moved to a different directory in commit 22447981fc05
("KEYS: Move trusted.h to include/keys [ver #2]").

Cc: Denis Kenzior <denkenz@gmail.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

KEYS: trusted: correctly initialize digests and fix locking issue

Commit 0b6cf6b97b7e ("tpm: pass an array of tpm_extend_digest structures to
tpm_pcr_extend()") modifies tpm_pcr_extend() to accept a digest for each
PCR bank. After modification, tpm_pcr_extend() expects that digests are
passed in the same order as the algorithms set in chip->allocated_banks.

This patch fixes two issues introduced in the last iterations of the patch
set: missing initialization of the TPM algorithm ID in the tpm_digest
structures passed to tpm_pcr_extend() by the trusted key module, and
unreleased locks in the TPM driver due to returning from tpm_pcr_extend()
without calling tpm_put_ops().

Cc: stable@vger.kernel.org
Fixes: 0b6cf6b97b7e ("tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

selftests/tpm2: Add log and *.pyc to .gitignore

Fixes: 6ea3dfe1e073 ("selftests: add TPM 2.0 tests")
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

selftests/tpm2: Add the missing TEST_FILES assignment

The Python files required by the selftests are not packaged because of
the missing assignment to TEST_FILES. Add the assignment.

Cc: stable@vger.kernel.org
Fixes: 6ea3dfe1e073 ("selftests: add TPM 2.0 tests")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>

Merge tag 'for-5.4/io_uring-2019-09-24' of git://git.kernel.dk/linux-block

Pull more io_uring updates from Jens Axboe:
 "A collection of later fixes and additions, that weren't quite ready
  for pushing out with the initial pull request.

  This contains:

   - Fix potential use-after-free of shadow requests (Jackie)

   - Fix potential OOM crash in request allocation (Jackie)

   - kmalloc+memcpy -> kmemdup cleanup (Jackie)

   - Fix poll crash regression (me)

   - Fix SQ thread not being nice and giving up CPU for !PREEMPT (me)

   - Add support for timeouts, making it easier to do epoll_wait()
     conversions, for instance (me)

   - Ensure io_uring works without f_ops->read_iter() and
     f_ops->write_iter() (me)"

* tag 'for-5.4/io_uring-2019-09-24' of git://git.kernel.dk/linux-block:
  io_uring: correctly handle non ->{read,write}_iter() file_operations
  io_uring: IORING_OP_TIMEOUT support
  io_uring: use cond_resched() in sqthread
  io_uring: fix potential crash issue due to io_get_req failure
  io_uring: ensure poll commands clear ->sqe
  io_uring: fix use-after-free of shadow_req
  io_uring: use kmemdup instead of kmalloc and memcpy

Merge tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block

Pull more block updates from Jens Axboe:
 "Some later additions that weren't quite done for the first pull
  request, and also a few fixes that have arrived since.

  This contains:

   - Kill silly pktcdvd warning on attempting to register a non-scsi
     passthrough device (me)

   - Use symbolic constants for the block t10 protection types, and
     switch to handling it in core rather than in the drivers (Max)

   - libahci platform missing node put fix (Nishka)

   - Small series of fixes for BFQ (Paolo)

   - Fix possible nbd crash (Xiubo)"

* tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block:
  block: drop device references in bsg_queue_rq()
  block: t10-pi: fix -Wswitch warning
  pktcdvd: remove warning on attempting to register non-passthrough dev
  ata: libahci_platform: Add of_node_put() before loop exit
  nbd: fix possible page fault for nbd disk
  nbd: rename the runtime flags as NBD_RT_ prefixed
  block, bfq: push up injection only after setting service time
  block, bfq: increase update frequency of inject limit
  block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1
  block, bfq: update inject limit only after injection occurred
  block: centralize PI remapping logic to the block layer
  block: use symbolic constants for t10_pi type

Merge branch 'akpm' (patches from Andrew)

Merge updates from Andrew Morton:

 - a few hot fixes

 - ocfs2 updates

 - almost all of -mm (slab-generic, slab, slub, kmemleak, kasan,
   cleanups, debug, pagecache, memcg, gup, pagemap, memory-hotplug,
   sparsemem, vmalloc, initialization, z3fold, compaction, mempolicy,
   oom-kill, hugetlb, migration, thp, mmap, madvise, shmem, zswap,
   zsmalloc)

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits)
  mm/zsmalloc.c: fix a -Wunused-function warning
  zswap: do not map same object twice
  zswap: use movable memory if zpool support allocate movable memory
  zpool: add malloc_support_movable to zpool_driver
  shmem: fix obsolete comment in shmem_getpage_gfp()
  mm/madvise: reduce code duplication in error handling paths
  mm: mmap: increase sockets maximum memory size pgoff for 32bits
  mm/mmap.c: refine find_vma_prev() with rb_last()
  riscv: make mmap allocation top-down by default
  mips: use generic mmap top-down layout and brk randomization
  mips: replace arch specific way to determine 32bit task with generic version
  mips: adjust brk randomization offset to fit generic version
  mips: use STACK_TOP when computing mmap base address
  mips: properly account for stack randomization and stack guard gap
  arm: use generic mmap top-down layout and brk randomization
  arm: use STACK_TOP when computing mmap base address
  arm: properly account for stack randomization and stack guard gap
  arm64, mm: make randomization selected by generic topdown mmap layout
  arm64, mm: move generic mmap layout functions to mm
  arm64: consider stack randomization for mmap base only when necessary
  ...

mm/zsmalloc.c: fix a -Wunused-function warning

set_zspage_inuse() was introduced in the commit 4f42047bbde0 ("zsmalloc:
use accessor") but all the users of it were removed later by the commits,

bdb0af7ca8f0 ("zsmalloc: factor page chain functionality out")
3783689a1aa8 ("zsmalloc: introduce zspage structure")

so the function can be safely removed now.

Link: http://lkml.kernel.org/r/1568658408-19374-1-git-send-email-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zswap: do not map same object twice

zswap_writeback_entry() maps a handle to read swpentry first, and
then in the most common case it would map the same handle again.
This is ok when zbud is the backend since its mapping callback is
plain and simple, but it slows things down for z3fold.

Since there's hardly a point in unmapping a handle _that_ fast as
zswap_writeback_entry() does when it reads swpentry, the
suggestion is to keep the handle mapped till the end.

Link: http://lkml.kernel.org/r/20190916004640.b453167d3556c4093af4cf7d@gmail.com
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zswap: use movable memory if zpool support allocate movable memory

This is the third version that was updated according to the comments from
Sergey Senozhatsky https://lkml.org/lkml/2019/5/29/73 and Shakeel Butt
https://lkml.org/lkml/2019/6/4/973

zswap compresses swap pages into a dynamically allocated RAM-based memory
pool.  The memory pool should be zbud, z3fold or zsmalloc.  All of them
will allocate unmovable pages.  It will increase the number of unmovable
page blocks that will bad for anti-fragment.

zsmalloc support page migration if request movable page:
        handle = zs_malloc(zram->mem_pool, comp_len,
                GFP_NOIO | __GFP_HIGHMEM |
                __GFP_MOVABLE);

And commit "zpool: Add malloc_support_movable to zpool_driver" add
zpool_malloc_support_movable check malloc_support_movable to make sure if
a zpool support allocate movable memory.

This commit let zswap allocate block with gfp
__GFP_HIGHMEM | __GFP_MOVABLE if zpool support allocate movable memory.

Following part is test log in a pc that has 8G memory and 2G swap.

Without this commit:
~# echo lz4 > /sys/module/zswap/parameters/compressor
~# echo zsmalloc > /sys/module/zswap/parameters/zpool
~# echo 1 > /sys/module/zswap/parameters/enabled
~# swapon /swapfile
~# cd /home/teawater/kernel/vm-scalability/
/home/teawater/kernel/vm-scalability# export unit_size=$((9 * 1024 * 1024 * 1024))
/home/teawater/kernel/vm-scalability# ./case-anon-w-seq
2717908992 bytes / 4826062 usecs = 549973 KB/s
2717908992 bytes / 4864201 usecs = 545661 KB/s
2717908992 bytes / 4867015 usecs = 545346 KB/s
2717908992 bytes / 4915485 usecs = 539968 KB/s
397853 usecs to free memory
357820 usecs to free memory
421333 usecs to free memory
420454 usecs to free memory
/home/teawater/kernel/vm-scalability# cat /proc/pagetypeinfo
Page block order: 9
Pages per block:  512

Free pages count per migrate type at order       0      1      2      3      4      5      6      7      8      9     10
Node    0, zone      DMA, type    Unmovable      1      1      1      0      2      1      1      0      1      0      0
Node    0, zone      DMA, type      Movable      0      0      0      0      0      0      0      0      0      1      3
Node    0, zone      DMA, type  Reclaimable      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone      DMA, type   HighAtomic      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone      DMA, type          CMA      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone      DMA, type      Isolate      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone    DMA32, type    Unmovable      6      5      8      6      6      5      4      1      1      1      0
Node    0, zone    DMA32, type      Movable     25     20     20     19     22     15     14     11     11      5    767
Node    0, zone    DMA32, type  Reclaimable      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone    DMA32, type   HighAtomic      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone    DMA32, type          CMA      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone    DMA32, type      Isolate      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone   Normal, type    Unmovable   4753   5588   5159   4613   3712   2520   1448    594    188     11      0
Node    0, zone   Normal, type      Movable     16      3    457   2648   2143   1435    860    459    223    224    296
Node    0, zone   Normal, type  Reclaimable      0      0     44     38     11      2      0      0      0      0      0
Node    0, zone   Normal, type   HighAtomic      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone   Normal, type          CMA      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone   Normal, type      Isolate      0      0      0      0      0      0      0      0      0      0      0

Number of blocks type     Unmovable      Movable  Reclaimable   HighAtomic          CMA      Isolate
Node 0, zone      DMA            1            7            0            0            0            0
Node 0, zone    DMA32            4         1652            0            0            0            0
Node 0, zone   Normal          931         1485           15            0            0            0

With this commit:
~# echo lz4 > /sys/module/zswap/parameters/compressor
~# echo zsmalloc > /sys/module/zswap/parameters/zpool
~# echo 1 > /sys/module/zswap/parameters/enabled
~# swapon /swapfile
~# cd /home/teawater/kernel/vm-scalability/
/home/teawater/kernel/vm-scalability# export unit_size=$((9 * 1024 * 1024 * 1024))
/home/teawater/kernel/vm-scalability# ./case-anon-w-seq
2717908992 bytes / 4689240 usecs = 566020 KB/s
2717908992 bytes / 4760605 usecs = 557535 KB/s
2717908992 bytes / 4803621 usecs = 552543 KB/s
2717908992 bytes / 5069828 usecs = 523530 KB/s
431546 usecs to free memory
383397 usecs to free memory
456454 usecs to free memory
224487 usecs to free memory
/home/teawater/kernel/vm-scalability# cat /proc/pagetypeinfo
Page block order: 9
Pages per block:  512

Free pages count per migrate type at order       0      1      2      3      4      5      6      7      8      9     10
Node    0, zone      DMA, type    Unmovable      1      1      1      0      2      1      1      0      1      0      0
Node    0, zone      DMA, type      Movable      0      0      0      0      0      0      0      0      0      1      3
Node    0, zone      DMA, type  Reclaimable      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone      DMA, type   HighAtomic      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone      DMA, type          CMA      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone      DMA, type      Isolate      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone    DMA32, type    Unmovable     10      8     10      9     10      4      3      2      3      0      0
Node    0, zone    DMA32, type      Movable     18     12     14     16     16     11      9      5      5      6    775
Node    0, zone    DMA32, type  Reclaimable      0      0      0      0      0      0      0      0      0      0      1
Node    0, zone    DMA32, type   HighAtomic      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone    DMA32, type          CMA      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone    DMA32, type      Isolate      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone   Normal, type    Unmovable   2669   1236    452    118     37     14      4      1      2      3      0
Node    0, zone   Normal, type      Movable   3850   6086   5274   4327   3510   2494   1520    934    438    220    470
Node    0, zone   Normal, type  Reclaimable     56     93    155    124     47     31     17      7      3      0      0
Node    0, zone   Normal, type   HighAtomic      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone   Normal, type          CMA      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone   Normal, type      Isolate      0      0      0      0      0      0      0      0      0      0      0

Number of blocks type     Unmovable      Movable  Reclaimable   HighAtomic          CMA      Isolate
Node 0, zone      DMA            1            7            0            0            0            0
Node 0, zone    DMA32            4         1650            2            0            0            0
Node 0, zone   Normal           79         2326           26            0            0            0

You can see that the number of unmovable page blocks is decreased
when the kernel has this commit.

Link: http://lkml.kernel.org/r/20190605100630.13293-2-teawaterz@linux.alibaba.com
Signed-off-by: Hui Zhu <teawaterz@linux.alibaba.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zpool: add malloc_support_movable to zpool_driver

As a zpool_driver, zsmalloc can allocate movable memory because it support
migate pages.  But zbud and z3fold cannot allocate movable memory.

Add malloc_support_movable to zpool_driver.  If a zpool_driver support
allocate movable memory, set it to true.  And add
zpool_malloc_support_movable check malloc_support_movable to make sure if
a zpool support allocate movable memory.

Link: http://lkml.kernel.org/r/20190605100630.13293-1-teawaterz@linux.alibaba.com
Signed-off-by: Hui Zhu <teawaterz@linux.alibaba.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

shmem: fix obsolete comment in shmem_getpage_gfp()

Replace "fault_mm" with "vmf" in code comment because commit cfda05267f7b
("userfaultfd: shmem: add userfaultfd hook for shared memory faults") has
changed the prototpye of shmem_getpage_gfp() - pass vmf instead of
fault_mm to the function.

Before:
static int shmem_getpage_gfp(struct inode *inode, pgoff_t index,
struct page **pagep, enum sgp_type sgp,
gfp_t gfp, struct mm_struct *fault_mm, int *fault_type);
After:
static int shmem_getpage_gfp(struct inode *inode, pgoff_t index,
struct page **pagep, enum sgp_type sgp,
gfp_t gfp, struct vm_area_struct *vma,
struct vm_fault *vmf, vm_fault_t *fault_type);

Link: http://lkml.kernel.org/r/20190816100204.9781-1-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/madvise: reduce code duplication in error handling paths

madvise_behavior() converts -ENOMEM to -EAGAIN in several places using
identical code.

Move that code to a common error handling path.

No functional changes.

Link: http://lkml.kernel.org/r/1564640896-1210-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: mmap: increase sockets maximum memory size pgoff for 32bits

The AF_XDP sockets umem mapping interface uses XDP_UMEM_PGOFF_FILL_RING
and XDP_UMEM_PGOFF_COMPLETION_RING offsets.  These offsets are
established already and are part of the configuration interface.

But for 32-bit systems, using AF_XDP socket configuration, these values
are too large to pass the maximum allowed file size verification.  The
offsets can be tuned off, but instead of changing the existing
interface, let's extend the max allowed file size for sockets.

No one has been using this until this patch with 32 bits as without
this fix af_xdp sockets can't be used at all, so it unblocks af_xdp
socket usage for 32bit systems.

All list of mmap cbs for sockets was verified for side effects and all
of them contain dummy cb - sock_no_mmap() at this moment, except the
following:

xsk_mmap() - it's what this fix is needed for.
tcp_mmap() - doesn't have obvious issues with pgoff - no any references on it.
packet_mmap() - return -EINVAL if it's even set.

Link: http://lkml.kernel.org/r/20190812124326.32146-1-ivan.khoronzhuk@linaro.org
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmap.c: refine find_vma_prev() with rb_last()

When addr is out of range of the whole rb_tree, pprev will point to the
right-most node.  rb_tree facility already provides a helper function,
rb_last(), to do this task.  We can leverage this instead of
reimplementing it.

This patch refines find_vma_prev() with rb_last() to make it a little
nicer to read.

[akpm@linux-foundation.org: little cleanup, per Vlastimil]
Link: http://lkml.kernel.org/r/20190809001928.4950-1-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

riscv: make mmap allocation top-down by default

In order to avoid wasting user address space by using bottom-up mmap
allocation scheme, prefer top-down scheme when possible.

Before:
root@qemuriscv64:~# cat /proc/self/maps
00010000-00016000 r-xp 00000000 fe:00 6389       /bin/cat.coreutils
00016000-00017000 r--p 00005000 fe:00 6389       /bin/cat.coreutils
00017000-00018000 rw-p 00006000 fe:00 6389       /bin/cat.coreutils
00018000-00039000 rw-p 00000000 00:00 0          [heap]
1555556000-155556d000 r-xp 00000000 fe:00 7193   /lib/ld-2.28.so
155556d000-155556e000 r--p 00016000 fe:00 7193   /lib/ld-2.28.so
155556e000-155556f000 rw-p 00017000 fe:00 7193   /lib/ld-2.28.so
155556f000-1555570000 rw-p 00000000 00:00 0
1555570000-1555572000 r-xp 00000000 00:00 0      [vdso]
1555574000-1555576000 rw-p 00000000 00:00 0
1555576000-1555674000 r-xp 00000000 fe:00 7187   /lib/libc-2.28.so
1555674000-1555678000 r--p 000fd000 fe:00 7187   /lib/libc-2.28.so
1555678000-155567a000 rw-p 00101000 fe:00 7187   /lib/libc-2.28.so
155567a000-15556a0000 rw-p 00000000 00:00 0
3fffb90000-3fffbb1000 rw-p 00000000 00:00 0      [stack]

After:
root@qemuriscv64:~# cat /proc/self/maps
00010000-00016000 r-xp 00000000 fe:00 6389       /bin/cat.coreutils
00016000-00017000 r--p 00005000 fe:00 6389       /bin/cat.coreutils
00017000-00018000 rw-p 00006000 fe:00 6389       /bin/cat.coreutils
2de81000-2dea2000 rw-p 00000000 00:00 0          [heap]
3ff7eb6000-3ff7ed8000 rw-p 00000000 00:00 0
3ff7ed8000-3ff7fd6000 r-xp 00000000 fe:00 7187   /lib/libc-2.28.so
3ff7fd6000-3ff7fda000 r--p 000fd000 fe:00 7187   /lib/libc-2.28.so
3ff7fda000-3ff7fdc000 rw-p 00101000 fe:00 7187   /lib/libc-2.28.so
3ff7fdc000-3ff7fe2000 rw-p 00000000 00:00 0
3ff7fe4000-3ff7fe6000 r-xp 00000000 00:00 0      [vdso]
3ff7fe6000-3ff7ffd000 r-xp 00000000 fe:00 7193   /lib/ld-2.28.so
3ff7ffd000-3ff7ffe000 r--p 00016000 fe:00 7193   /lib/ld-2.28.so
3ff7ffe000-3ff7fff000 rw-p 00017000 fe:00 7193   /lib/ld-2.28.so
3ff7fff000-3ff8000000 rw-p 00000000 00:00 0
3fff888000-3fff8a9000 rw-p 00000000 00:00 0      [stack]

[alex@ghiti.fr: v6]
Link: http://lkml.kernel.org/r/20190808061756.19712-15-alex@ghiti.fr
Link: http://lkml.kernel.org/r/20190730055113.23635-15-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> [arch/riscv]
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mips: use generic mmap top-down layout and brk randomization

mips uses a top-down layout by default that exactly fits the generic
functions, so get rid of arch specific code and use the generic version by
selecting ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT.

As ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT selects ARCH_HAS_ELF_RANDOMIZE,
use the generic version of arch_randomize_brk since it also fits.  Note
that this commit also removes the possibility for mips to have elf
randomization and no MMU: without MMU, the security added by randomization
is worth nothing.

Link: http://lkml.kernel.org/r/20190730055113.23635-14-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mips: replace arch specific way to determine 32bit task with generic version

Mips uses TASK_IS_32BIT_ADDR to determine if a task is 32bit, but this
define is mips specific and other arches do not have it: instead, use
!IS_ENABLED(CONFIG_64BIT) || is_compat_task() condition.

Link: http://lkml.kernel.org/r/20190730055113.23635-13-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mips: adjust brk randomization offset to fit generic version

This commit simply bumps up to 32MB and 1GB the random offset of brk,
compared to 8MB and 256MB, for 32bit and 64bit respectively.

Link: http://lkml.kernel.org/r/20190730055113.23635-12-alex@ghiti.fr
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mips: use STACK_TOP when computing mmap base address

mmap base address must be computed wrt stack top address, using TASK_SIZE
is wrong since STACK_TOP and TASK_SIZE are not equivalent.

Link: http://lkml.kernel.org/r/20190730055113.23635-11-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mips: properly account for stack randomization and stack guard gap

This commit takes care of stack randomization and stack guard gap when
computing mmap base address and checks if the task asked for
randomization.  This fixes the problem uncovered and not fixed for arm
here: https://lkml.kernel.org/r/20170622200033.25714-1-riel@redhat.com

Link: http://lkml.kernel.org/r/20190730055113.23635-10-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm: use generic mmap top-down layout and brk randomization

arm uses a top-down mmap layout by default that exactly fits the generic
functions, so get rid of arch specific code and use the generic version by
selecting ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT.

As ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT selects ARCH_HAS_ELF_RANDOMIZE,
use the generic version of arch_randomize_brk since it also fits.  Note
that this commit also removes the possibility for arm to have elf
randomization and no MMU: without MMU, the security added by randomization
is worth nothing.

Note that it is safe to remove STACK_RND_MASK since it matches the default
value.

Link: http://lkml.kernel.org/r/20190730055113.23635-9-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm: use STACK_TOP when computing mmap base address

mmap base address must be computed wrt stack top address, using TASK_SIZE
is wrong since STACK_TOP and TASK_SIZE are not equivalent.

Link: http://lkml.kernel.org/r/20190730055113.23635-8-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm: properly account for stack randomization and stack guard gap

This commit takes care of stack randomization and stack guard gap when
computing mmap base address and checks if the task asked for
randomization.  This fixes the problem uncovered and not fixed for arm
here: https://lkml.kernel.org/r/20170622200033.25714-1-riel@redhat.com

Link: http://lkml.kernel.org/r/20190730055113.23635-7-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm64, mm: make randomization selected by generic topdown mmap layout

This commits selects ARCH_HAS_ELF_RANDOMIZE when an arch uses the generic
topdown mmap layout functions so that this security feature is on by
default.

Note that this commit also removes the possibility for arm64 to have elf
randomization and no MMU: without MMU, the security added by randomization
is worth nothing.

Link: http://lkml.kernel.org/r/20190730055113.23635-6-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm64, mm: move generic mmap layout functions to mm

arm64 handles top-down mmap layout in a way that can be easily reused by
other architectures, so make it available in mm.  It then introduces a new
config ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT that can be set by other
architectures to benefit from those functions.  Note that this new config
depends on MMU being enabled, if selected without MMU support, a warning
will be thrown.

Link: http://lkml.kernel.org/r/20190730055113.23635-5-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm64: consider stack randomization for mmap base only when necessary

Do not offset mmap base address because of stack randomization if current
task does not want randomization.  Note that x86 already implements this
behaviour.

Link: http://lkml.kernel.org/r/20190730055113.23635-4-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm64: make use of is_compat_task instead of hardcoding this test

Each architecture has its own way to determine if a task is a compat task,
by using is_compat_task in arch_mmap_rnd, it allows more genericity and
then it prepares its moving to mm/.

Link: http://lkml.kernel.org/r/20190730055113.23635-3-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, fs: move randomize_stack_top from fs to mm

Patch series "Provide generic top-down mmap layout functions", v6.

This series introduces generic functions to make top-down mmap layout
easily accessible to architectures, in particular riscv which was the
initial goal of this series.  The generic implementation was taken from
arm64 and used successively by arm, mips and finally riscv.

Note that in addition the series fixes 2 issues:

- stack randomization was taken into account even if not necessary.

- [1] fixed an issue with mmap base which did not take into account
  randomization but did not report it to arm and mips, so by moving arm64
  into a generic library, this problem is now fixed for both
  architectures.

This work is an effort to factorize architecture functions to avoid code
duplication and oversights as in [1].

[1]: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1429066.html

This patch (of 14):

This preparatory commit moves this function so that further introduction
of generic topdown mmap layout is contained only in mm/util.c.

Link: http://lkml.kernel.org/r/20190730055113.23635-2-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uprobe: collapse THP pmd after removing all uprobes

After all uprobes are removed from the huge page (with PTE pgtable), it is
possible to collapse the pmd and benefit from THP again.  This patch does
the collapse by calling collapse_pte_mapped_thp().

Link: http://lkml.kernel.org/r/20190815164525.1848545-7-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

khugepaged: enable collapse pmd for pte-mapped THP

khugepaged needs exclusive mmap_sem to access page table.  When it fails
to lock mmap_sem, the page will fault in as pte-mapped THP.  As the page
is already a THP, khugepaged will not handle this pmd again.

This patch enables the khugepaged to retry collapse the page table.

struct mm_slot (in khugepaged.c) is extended with an array, containing
addresses of pte-mapped THPs.  We use array here for simplicity.  We can
easily replace it with more advanced data structures when needed.

In khugepaged_scan_mm_slot(), if the mm contains pte-mapped THP, we try to
collapse the page table.

Since collapse may happen at an later time, some pages may already fault
in.  collapse_pte_mapped_thp() is added to properly handle these pages.
collapse_pte_mapped_thp() also double checks whether all ptes in this pmd
are mapping to the same THP.  This is necessary because some subpage of
the THP may be replaced, for example by uprobe.  In such cases, it is not
possible to collapse the pmd.

[kirill.shutemov@linux.intel.com: add comments for retract_page_tables()]
Link: http://lkml.kernel.org/r/20190816145443.6ard3iilytc6jlgv@box
Link: http://lkml.kernel.org/r/20190815164525.1848545-6-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT

Use the newly added FOLL_SPLIT_PMD in uprobe.  This preserves the huge
page when the uprobe is enabled.  When the uprobe is disabled, newer
instances of the same application could still benefit from huge page.

For the next step, we will enable khugepaged to regroup the pmd, so that
existing instances of the application could also benefit from huge page
after the uprobe is disabled.

Link: http://lkml.kernel.org/r/20190815164525.1848545-5-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, thp: introduce FOLL_SPLIT_PMD

Introduce a new foll_flag: FOLL_SPLIT_PMD.  As the name says
FOLL_SPLIT_PMD splits huge pmd for given mm_struct, the underlining huge
page stays as-is.

FOLL_SPLIT_PMD is useful for cases where we need to use regular pages, but
would switch back to huge page and huge pmd on.  One of such example is
uprobe.  The following patches use FOLL_SPLIT_PMD in uprobe.

Link: http://lkml.kernel.org/r/20190815164525.1848545-4-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uprobe: use original page when all uprobes are removed

Currently, uprobe swaps the target page with a anonymous page in both
install_breakpoint() and remove_breakpoint().  When all uprobes on a page
are removed, the given mm is still using an anonymous page (not the
original page).

This patch allows uprobe to use original page when possible (all uprobes
on the page are already removed, and the original page is in page cache
and uptodate).

As suggested by Oleg, we unmap the old_page and let the original page
fault in.

Link: http://lkml.kernel.org/r/20190815164525.1848545-3-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: move memcmp_pages() and pages_identical()

Patch series "THP aware uprobe", v13.

This patchset makes uprobe aware of THPs.

Currently, when uprobe is attached to text on THP, the page is split by
FOLL_SPLIT.  As a result, uprobe eliminates the performance benefit of
THP.

This set makes uprobe THP-aware.  Instead of FOLL_SPLIT, we introduces
FOLL_SPLIT_PMD, which only split PMD for uprobe.

After all uprobes within the THP are removed, the PTE-mapped pages are
regrouped as huge PMD.

This set (plus a few THP patches) is also available at

   https://github.com/liu-song-6/linux/tree/uprobe-thp

This patch (of 6):

Move memcmp_pages() to mm/util.c and pages_identical() to mm.h, so that we
can use them in other files.

Link: http://lkml.kernel.org/r/20190815164525.1848545-2-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <matthew.wilcox@oracle.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: thp: make deferred split shrinker memcg aware

Currently THP deferred split shrinker is not memcg aware, this may cause
premature OOM with some configuration.  For example the below test would
run into premature OOM easily:

$ cgcreate -g memory:thp
$ echo 4G > /sys/fs/cgroup/memory/thp/memory/limit_in_bytes
$ cgexec -g memory:thp transhuge-stress 4000

transhuge-stress comes from kernel selftest.

It is easy to hit OOM, but there are still a lot THP on the deferred split
queue, memcg direct reclaim can't touch them since the deferred split
shrinker is not memcg aware.

Convert deferred split shrinker memcg aware by introducing per memcg
deferred split queue.  The THP should be on either per node or per memcg
deferred split queue if it belongs to a memcg.  When the page is
immigrated to the other memcg, it will be immigrated to the target memcg's
deferred split queue too.

Reuse the second tail page's deferred_list for per memcg list since the
same THP can't be on multiple deferred split queues.

[yang.shi@linux.alibaba.com: simplify deferred split queue dereference per Kirill Tkhai]
Link: http://lkml.kernel.org/r/1566496227-84952-5-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1565144277-36240-5-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: shrinker: make shrinker not depend on memcg kmem

Currently shrinker is just allocated and can work when memcg kmem is
enabled.  But, THP deferred split shrinker is not slab shrinker, it
doesn't make too much sense to have such shrinker depend on memcg kmem.
It should be able to reclaim THP even though memcg kmem is disabled.

Introduce a new shrinker flag, SHRINKER_NONSLAB, for non-slab shrinker.
When memcg kmem is disabled, just such shrinkers can be called in
shrinking memcg slab.

[yang.shi@linux.alibaba.com: add comment]
Link: http://lkml.kernel.org/r/1566496227-84952-4-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1565144277-36240-4-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: move mem_cgroup_uncharge out of __page_cache_release()

A later patch makes THP deferred split shrinker memcg aware, but it needs
page->mem_cgroup information in THP destructor, which is called after
mem_cgroup_uncharge() now.

So move mem_cgroup_uncharge() from __page_cache_release() to compound page
destructor, which is called by both THP and other compound pages except
HugeTLB.  And call it in __put_single_page() for single order page.

Link: http://lkml.kernel.org/r/1565144277-36240-3-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Suggested-by: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: thp: extract split_queue_* into a struct

Patch series "Make deferred split shrinker memcg aware", v6.

Currently THP deferred split shrinker is not memcg aware, this may cause
premature OOM with some configuration.  For example the below test would
run into premature OOM easily:

$ cgcreate -g memory:thp
$ echo 4G > /sys/fs/cgroup/memory/thp/memory/limit_in_bytes
$ cgexec -g memory:thp transhuge-stress 4000

transhuge-stress comes from kernel selftest.

It is easy to hit OOM, but there are still a lot THP on the deferred split
queue, memcg direct reclaim can't touch them since the deferred split
shrinker is not memcg aware.

Convert deferred split shrinker memcg aware by introducing per memcg
deferred split queue.  The THP should be on either per node or per memcg
deferred split queue if it belongs to a memcg.  When the page is
immigrated to the other memcg, it will be immigrated to the target memcg's
deferred split queue too.

Reuse the second tail page's deferred_list for per memcg list since the
same THP can't be on multiple deferred split queues.

Make deferred split shrinker not depend on memcg kmem since it is not
slab.  It doesn't make sense to not shrink THP even though memcg kmem is
disabled.

With the above change the test demonstrated above doesn't trigger OOM even
though with cgroup.memory=nokmem.

This patch (of 4):

Put split_queue, split_queue_lock and split_queue_len into a struct in
order to reduce code duplication when we convert deferred_split to memcg
aware in the later patches.

Link: http://lkml.kernel.org/r/1565144277-36240-2-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Suggested-by: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm,thp: avoid writes to file with THP in pagecache

In previous patch, an application could put part of its text section in
THP via madvise().  These THPs will be protected from writes when the
application is still running (TXTBSY).  However, after the application
exits, the file is available for writes.

This patch avoids writes to file THP by dropping page cache for the file
when the file is open for write.  A new counter nr_thps is added to struct
address_space.  In do_dentry_open(), if the file is open for write and
nr_thps is non-zero, we drop page cache for the whole file.

Link: http://lkml.kernel.org/r/20190801184244.3169074-8-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm,thp: add read-only THP support for (non-shmem) FS

This patch is (hopefully) the first step to enable THP for non-shmem
filesystems.

This patch enables an application to put part of its text sections to THP
via madvise, for example:

    madvise((void *)0x600000, 0x200000, MADV_HUGEPAGE);

We tried to reuse the logic for THP on tmpfs.

Currently, write is not supported for non-shmem THP.  khugepaged will only
process vma with VM_DENYWRITE.  sys_mmap() ignores VM_DENYWRITE requests
(see ksys_mmap_pgoff).  The only way to create vma with VM_DENYWRITE is
execve().  This requirement limits non-shmem THP to text sections.

The next patch will handle writes, which would only happen when the all
the vmas with VM_DENYWRITE are unmapped.

An EXPERIMENTAL config, READ_ONLY_THP_FOR_FS, is added to gate this
feature.

[songliubraving@fb.com: fix build without CONFIG_SHMEM]
Link: http://lkml.kernel.org/r/F53407FB-96CC-42E8-9862-105C92CC2B98@fb.com
[songliubraving@fb.com: fix double unlock in collapse_file()]
Link: http://lkml.kernel.org/r/B960CBFA-8EFC-4DA4-ABC5-1977FFF2CA57@fb.com
Link: http://lkml.kernel.org/r/20190801184244.3169074-7-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

khugepaged: rename collapse_shmem() and khugepaged_scan_shmem()

Next patch will add khugepaged support of non-shmem files.  This patch
renames these two functions to reflect the new functionality:

    collapse_shmem()        =>  collapse_file()
    khugepaged_scan_shmem() =>  khugepaged_scan_file()

Link: http://lkml.kernel.org/r/20190801184244.3169074-6-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm,thp: stats for file backed THP

In preparation for non-shmem THP, this patch adds a few stats and exposes
them in /proc/meminfo, /sys/bus/node/devices/<node>/meminfo, and
/proc/<pid>/task/<tid>/smaps.

This patch is mostly a rewrite of Kirill A.  Shutemov's earlier version:
https://lkml.kernel.org/r/20170126115819.58875-5-kirill.shutemov@linux.intel.com/

Link: http://lkml.kernel.org/r/20190801184244.3169074-5-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

filemap: update offset check in filemap_fault()

With THP, current check of offset:

    VM_BUG_ON_PAGE(page->index != offset, page);

is no longer accurate. Update it to:

    VM_BUG_ON_PAGE(page_to_pgoff(page) != offset, page);

Link: http://lkml.kernel.org/r/20190801184244.3169074-4-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

filemap: check compound_head(page)->mapping in pagecache_get_page()

Similar to previous patch, pagecache_get_page() avoids race condition with
truncate by checking page->mapping == mapping.  This does not work for
compound pages.  This patch let it check compound_head(page)->mapping
instead.

Link: http://lkml.kernel.org/r/20190801184244.3169074-3-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

filemap: check compound_head(page)->mapping in filemap_fault()

Patch series "Enable THP for text section of non-shmem files", v10;

This patchset follows up discussion at LSF/MM 2019.  The motivation is to
put text section of an application in THP, and thus reduces iTLB miss rate
and improves performance.  Both Facebook and Oracle showed strong
interests to this feature.

To make reviews easier, this set aims a mininal valid product.  Current
version of the work does not have any changes to file system specific
code.  This comes with some limitations (discussed later).

This set enables an application to "hugify" its text section by simply
running something like:

          madvise(0x600000, 0x80000, MADV_HUGEPAGE);

Before this call, the /proc/<pid>/maps looks like:

    00400000-074d0000 r-xp 00000000 00:27 2006927     app

After this call, part of the text section is split out and mapped to
THP:

    00400000-00425000 r-xp 00000000 00:27 2006927     app
    00600000-00e00000 r-xp 00200000 00:27 2006927     app   <<< on THP
    00e00000-074d0000 r-xp 00a00000 00:27 2006927     app

Limitations:

1. This only works for text section (vma with VM_DENYWRITE).
2. Original limitation #2 is removed in v3.

We gated this feature with an experimental config, READ_ONLY_THP_FOR_FS.
Once we get better support on the write path, we can remove the config and
enable it by default.

Tested cases:
1. Tested with btrfs and ext4.
2. Tested with real work application (memcache like caching service).
3. Tested with "THP aware uprobe":
   https://patchwork.kernel.org/project/linux-mm/list/?series=131339

This patch (of 7):

Currently, filemap_fault() avoids race condition with truncate by checking
page->mapping == mapping.  This does not work for compound pages.  This
patch let it check compound_head(page)->mapping instead.

Link: http://lkml.kernel.org/r/20190801184244.3169074-2-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: update split_huge_page_pmd() comment

According to 78ddc5347341 ("thp: rename split_huge_page_pmd() to
split_huge_pmd()"), update related comment.

Link: http://lkml.kernel.org/r/20190731033406.185285-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/migrate.c: clean up useless code in migrate_vma_collect_pmd()

Remove unused 'pfn' variable.

Link: http://lkml.kernel.org/r/1565167272-21453-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jan Kara <jack@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: don't retry when pool page allocations start to fail

When allocating hugetlbfs pool pages via /proc/sys/vm/nr_hugepages, the
pages will be interleaved between all nodes of the system.  If nodes are
not equal, it is quite possible for one node to fill up before the others.
When this happens, the code still attempts to allocate pages from the
full node.  This results in calls to direct reclaim and compaction which
slow things down considerably.

When allocating pool pages, note the state of the previous allocation for
each node.  If previous allocation failed, do not use the aggressive retry
algorithm on successive attempts.  The allocation will still succeed if
there is memory available, but it will not try as hard to free up memory.

Link: http://lkml.kernel.org/r/20190806014744.15446-5-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, compaction: raise compaction priority after it withdrawns

Mike Kravetz reports that "hugetlb allocations could stall for minutes or
hours when should_compact_retry() would return true more often then it
should.  Specifically, this was in the case where compact_result was
COMPACT_DEFERRED and COMPACT_PARTIAL_SKIPPED and no progress was being
made."

The problem is that the compaction_withdrawn() test in
should_compact_retry() includes compaction outcomes that are only possible
on low compaction priority, and results in a retry without increasing the
priority.  This may result in furter reclaim, and more incomplete
compaction attempts.

With this patch, compaction priority is raised when possible, or
should_compact_retry() returns false.

The COMPACT_SKIPPED result doesn't really fit together with the other
outcomes in compaction_withdrawn(), as that's a result caused by
insufficient order-0 pages, not due to low compaction priority.  With this
patch, it is moved to a new compaction_needs_reclaim() function, and for
that outcome we keep the current logic of retrying if it looks like
reclaim will be able to help.

Link: http://lkml.kernel.org/r/20190806014744.15446-4-mike.kravetz@oracle.com
Reported-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, reclaim: cleanup should_continue_reclaim()

After commit "mm, reclaim: make should_continue_reclaim perform dryrun
detection", closer look at the function shows, that nr_reclaimed == 0
means the function will always return false.  And since non-zero
nr_reclaimed implies non_zero nr_scanned, testing nr_scanned serves no
purpose, and so does the testing for __GFP_RETRY_MAYFAIL.

This patch thus cleans up the function to test only !nr_reclaimed upfront,
and remove the __GFP_RETRY_MAYFAIL test and nr_scanned parameter
completely.  Comment is also updated, explaining that approximating "full
LRU list has been scanned" with nr_scanned == 0 didn't really work.

Link: http://lkml.kernel.org/r/20190806014744.15446-3-mike.kravetz@oracle.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, reclaim: make should_continue_reclaim perform dryrun detection

Patch series "address hugetlb page allocation stalls", v2.

Allocation of hugetlb pages via sysctl or procfs can stall for minutes or
hours.  A simple example on a two node system with 8GB of memory is as
follows:

echo 4096 > /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages
echo 4096 > /proc/sys/vm/nr_hugepages

Obviously, both allocation attempts will fall short of their 8GB goal.
However, one or both of these commands may stall and not be interruptible.
The issues were initially discussed in mail thread [1] and RFC code at
[2].

This series addresses the issues causing the stalls.  There are two
distinct fixes, a cleanup, and an optimization.  The reclaim patch by
Hillf and compaction patch by Vlasitmil address corner cases in their
respective areas.  hugetlb page allocation could stall due to either of
these issues.  Vlasitmil added a cleanup patch after Hillf's
modifications.  The hugetlb patch by Mike is an optimization suggested
during the debug and development process.

[1] http://lkml.kernel.org/r/d38a095e-dc39-7e82-bb76-2c9247929f07@oracle.com
[2] http://lkml.kernel.org/r/20190724175014.9935-1-mike.kravetz@oracle.com

This patch (of 4):

Address the issue of should_continue_reclaim returning true too often for
__GFP_RETRY_MAYFAIL attempts when !nr_reclaimed and nr_scanned.  This was
observed during hugetlb page allocation causing stalls for minutes or
hours.

We can stop reclaiming pages if compaction reports it can make a progress.
There might be side-effects for other high-order allocations that would
potentially benefit from reclaiming more before compaction so that they
would be faster and less likely to stall.  However, the consequences of
premature/over-reclaim are considered worse.

We can also bail out of reclaiming pages if we know that there are not
enough inactive lru pages left to satisfy the costly allocation.

We can give up reclaiming pages too if we see dryrun occur, with the
certainty of plenty of inactive pages.  IOW with dryrun detected, we are
sure we have reclaimed as many pages as we could.

Link: http://lkml.kernel.org/r/20190806014744.15446-2-mike.kravetz@oracle.com
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg, kmem: deprecate kmem.limit_in_bytes

Cgroup v1 memcg controller has exposed a dedicated kmem limit to users
which turned out to be really a bad idea because there are paths which
cannot shrink the kernel memory usage enough to get below the limit (e.g.
because the accounted memory is not reclaimable).  There are cases when
the failure is even not allowed (e.g.  __GFP_NOFAIL).  This means that the
kmem limit is in excess to the hard limit without any way to shrink and
thus completely useless.  OOM killer cannot be invoked to handle the
situation because that would lead to a premature oom killing.

As a result many places might see ENOMEM returning from kmalloc and result
in unexpected errors.  E.g.  a global OOM killer when there is a lot of
free memory because ENOMEM is translated into VM_FAULT_OOM in #PF path and
therefore pagefault_out_of_memory would result in OOM killer.

Please note that the kernel memory is still accounted to the overall limit
along with the user memory so removing the kmem specific limit should
still allow to contain kernel memory consumption.  Unlike the kmem one,
though, it invokes memory reclaim and targeted memcg oom killing if
necessary.

Start the deprecation process by crying to the kernel log.  Let's see
whether there are relevant usecases and simply return to EINVAL in the
second stage if nobody complains in few releases.

[akpm@linux-foundation.org: tweak documentation text]
Link: http://lkml.kernel.org/r/20190911151612.GI4023@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Thomas Lindroth <thomas.lindroth@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcontrol.c: fix a -Wunused-function warning

mem_cgroup_id_get() was introduced in commit 73f576c04b94 ("mm:memcontrol:
fix cgroup creation failure after many small jobs").

Later, it no longer has any user since the commits,

1f47b61fb407 ("mm: memcontrol: fix swap counter leak on swapout from offline cgroup")
58fa2a5512d9 ("mm: memcontrol: add sanity checks for memcg->id.ref on get/put")

so safe to remove it.

Link: http://lkml.kernel.org/r/1568648453-5482-1-git-send-email-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, oom: consider present pages for the node size

constrained_alloc() calculates the size of the oom domain by using
node_spanned_pages which is incorrect because this is the full range of
the physical memory range that the numa node occupies rather than the
memory that backs that range which is represented by node_present_pages.

Sparsely populated nodes (e.g.  after memory hot remove or simply sparse
due to memory layout) can have really a large difference between the two.
This shouldn't really cause any real user observable problems because the
oom calculates a ratio against totalpages and used memory cannot exceed
present pages but it is confusing and wrong from code point of view.

Link: http://lkml.kernel.org/r/20190829163443.899-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/oom_kill.c: fix oom_cpuset_eligible() comment

Commit ac311a14c682 ("oom: decouple mems_allowed from
oom_unkillable_task") changed has_intersects_mems_allowed() to
oom_cpuset_eligible(), but didn't change the comment.

Link: http://lkml.kernel.org/r/1566959929-10638-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>