compat-wireless: remove cfg80211 certification onus pending patches

A new iteration was sent, I'll update that next.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: remove linux-next-pending QCA955x support

This is now merged as of next-20120709

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: remove 802.11ad linux-next-pending patches

These are now merged as of next-20120709

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120709

Synchs with next-20120709

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

As compat includes linux/device.h well before iwlwifi, the
definitions from there are used without DEBUG, but iwlwifi
defines DEBUG to get debug output. Use dev_printk instead
of dev_dbg to get debugging back.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix patches/55-iwlwifi-msg-trace-fix.patch

The dev_err() was moved to deb_dbg() in this patch upstream:

commit 346c265a48169d73a69c88ce9d6b65e6bb3b1f20
Author: Johannes Berg <johannes.berg@intel.com>
Date:   Thu Jun 28 18:45:38 2012 +0200

    iwlwifi: fix debug message level

    Debug messages should be printed using dev_dbg() not
    dev_err() which requires DEBUG to be defined.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: Make target/compat branch check optional

The safety check to ensure that the target kernel and the
local compat-wireless branch are the same can be adjusted a
bit to allow users to generate stable releases from a temporary
branch.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add certification onus / base station pending patches

These are posted on the mailing list. Excerpt from the cover letter:

===

This is a second series on the wireless expert idea patches
with one additional patch added. As discussed the wireless expert
name really was not doing justice to the intent behind what we
wanted to convey and allow. The CONFIG_CFG80211_CERTIFICATION_ONUS
is what folks seemed to agree on, I've gone ahead and added some
lanaguage which I think represents the intent behind the option
clearly.

I've also added an extra patch which adds a new type of regulatory
hint which actually makes use of the new kernel configuration option
CONFIG_CFG80211_CERTIFICATION_ONUS. In this case the option is designed
to allow userspace to classify userspace regulatory hints either as
coming from a user or a cellular base station. If devices have been
tested with such a feature the driver could be annotated as such, this
typically may require a set of testing / perhaps some communication to
the firmware.

Open solutions obviously allow users to hack up their own code and
send random data to the kernel, however the intent behind the new
kernel option CONFIG_CFG80211_CERTIFICATION_ONUS is to allow a new
type of hint which we *do* want to treat differently in kernel space
and drivers. Linux distribtuions / system integrators can use this
new regulatory hint by classifying the regulatory hint using a new
attribute. Exactly how userspace propagates the cellular base station
hint to the kernel is outside the exact scope of this series, however,
I suspect userspace cell base station models could end up using dbus
signals to trigger an event to signal the respective regulatory hint.
Using something like geoclue would make sense.

An interesting side effect of supporting this type of new regulatory
hint is addressing which type of hints takes precedence: do we trust
the cell base station hint over an Access Point's country IE? In this
series that is what we do, we prefer the cell base station hint over
other hints mainly to also simplify the implementation and design.
This also has implications with as to what gets applied to the core
and to other drivers. For example the core will always trust the
cell base station hint if CONFIG_CFG80211_CERTIFICATION_ONUS was
enabled *but* a driver may wish to want to ignore these type of
hints. In such case then the core, with a cell base station hint
present, would not be passing along country IE hints. This soft of
corner case must be considered.

We must also consider what we do upon suspend / disconnect. We follow
the tradition of the existing implementation of how we handle
disconnect / suspend -- we reset the regulatory core to its default,
just as if we had booted a device for the first time. We do this given
that possible scenerio that you got last a cell base station hint
in Japan but resume the device in the US, in such cases you could
not initiate radiation on channel 13, for example.

The way this is implemented however is to disable this feature unless
both CONFIG_CFG80211_CERTIFICATION_ONUS *and* the driver explicitly
enable this feature. As such regressions should only be found by
those users using the new feature and willing to participate on
the development of the feature / idea or the cell base station
regulatory hint.

Luis R. Rodriguez (4):
  cfg80211: add CONFIG_CFG80211_CERTIFICATION_ONUS
  ath5k: replace modparam_all_channels with CONFIG_ATH5K_TEST_CHANNELS
  ath9k: make CONFIG_ATH9K_DFS_CERTIFIED depend on
    CFG80211_CERTIFICATION_ONUS
  cfg80211: add cellular base station regulatory hint support

 drivers/net/wireless/ath/ath5k/Kconfig |    8 +++
 drivers/net/wireless/ath/ath5k/base.c  |   17 +++---
 drivers/net/wireless/ath/ath9k/Kconfig |    2 +-
 include/linux/nl80211.h                |   28 ++++++++++
 include/net/regulatory.h               |    4 ++
 net/wireless/Kconfig                   |   21 ++++++++
 net/wireless/nl80211.c                 |   15 +++++-
 net/wireless/reg.c                     |   88 +++++++++++++++++++++++++++++---
 net/wireless/reg.h                     |    4 +-
 9 files changed, 171 insertions(+), 16 deletions(-)

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: copy over net/wireless/ and net/mac80211 Kconfig

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add Gabor's pendign patches for AR9550

These patches were posted by Gabor for ath9k. Below are
details extracted from his cover letter e-mail.

The patch-set adds initial support for the AR9550
wireless MAC into ath9k. This wireless MAC can be
found in the Qualcomm Atheros QCA955X SoCs. It is
a 3x3 chip and it supports both 2.4GHz and 5Ghz.

Gabor Juhos (20):
  ath9k: define DEVID for QCA955x
  ath9k: define MAC version for AR9550
  ath9k: set MAC version for AR9550
  ath9k: add platform_device_id for AR9550
  ath9k: add BB name string for AR9550
  ath9k: clear pciexpress flag for AR9550
  ath9k: enable TX/RX data byte swap for AR9550
  ath9k: add initvals for AR9550
  ath9k: add mode register initialization code for AR9550
  ath9k: read spur frequency information from eeprom for AR9550
  ath9k: fix XPABIASLEVEL settings for AR9550
  ath9k: fix antenna control configuration for AR9550
  ath9k: fix PAPRD settings for AR9550
  ath9k: fix RF channel frequency configuration for AR9550
  ath9k: disable SYNC_HOST1_FATAL interrupts for AR9550
  ath9k: skip internal regulator configuration for AR9550
  ath9k: fix PLL initialization for AR9550
  ath9k: enable PLL workaround for AR9550
  ath9k: set 4ADDRESS bit in RX filter for AR9550
  ath9k: enable support for AR9550

 drivers/net/wireless/ath/ath9k/ahb.c               |    4 +
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c     |    7 +-
 drivers/net/wireless/ath/ath9k/ar9003_hw.c         |   87 ++-
 drivers/net/wireless/ath/ath9k/ar9003_paprd.c      |    2 +-
 drivers/net/wireless/ath/ath9k/ar9003_phy.c        |   72 +-
 drivers/net/wireless/ath/ath9k/ar9003_phy.h        |    6 +-
 .../net/wireless/ath/ath9k/ar955x_1p0_initvals.h   | 1284 ++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/hw.c                |   40 +-
 drivers/net/wireless/ath/ath9k/hw.h                |    2 +
 drivers/net/wireless/ath/ath9k/mac.c               |    2 +-
 drivers/net/wireless/ath/ath9k/mac.h               |    1 +
 drivers/net/wireless/ath/ath9k/main.c              |    3 +-
 drivers/net/wireless/ath/ath9k/recv.c              |    3 +
 drivers/net/wireless/ath/ath9k/reg.h               |    4 +
 14 files changed, 1492 insertions(+), 25 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add pending 802.11ad pending patches

The only two remaining 802.11ad patches are related
to bit rates. I however did oppose the first patch
but throwing it in here for testing, and as there
is no other alternative yet.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: remove already applied 802.11ad patches

3 patches have been merged so far, remove them from the
linux-next-pending queue.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: drop patches/57-iwlwifi-debug-fix.patch for now

Johannes indicated that the patch to change it *from*
dev_err *to* dev_dbg is only in my iwlwifi-next tree now.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120703

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix patches/57-iwlwifi-debug-fix.patch

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

As compat includes linux/device.h well before iwlwifi, the
definitions from there are used without DEBUG, but iwlwifi
defines DEBUG to get debug output. Use dev_printk instead
of dev_dbg to get debugging back.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix patches/24-pcmcia.patch for next-20120702

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix disabling of CONFIG_WIL6210

The ./scripts/gen-compat-autoconf.sh script is fragiile and
needs the comment in place to know what was the endif is that
we should add.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: disable wil6210 for kernels older than 2.6.30

wil6210 requires MSI only availble on >= 2.6.30.

signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: remove -Werror from wil6210

This is making the build fail... Of course we will
have warnings when compiling against old kernels.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: stuff
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add the Wilocity wil6210 802.11ad / 60 GHz driver

This driver is still under development however some this driver
can now be used in monitor mode. Due to hardware limitation it
captures either only CP (control PHY) or DP (data PHY) frames.

Test compiled against 2.6.24..3.4

mcgrof@flash ~/devel/compat-wireless (git::master)$ ./scripts/driver-select wil6210
Processing new driver-select request...
Backing up makefile: Makefile.bk
Backup exists: Makefile.bk
Backup exists: Makefile.bk
Backup exists: Makefile.bk
Backup exists: Makefile.bk
Backing up makefile: drivers/net/wireless/Makefile.bk
Backing up makefile: drivers/net/wireless/ath/Makefile.bk
Backing up makefile: net/wireless/Makefile.bk
Backing up makefile: drivers/ssb/Makefile.bk
Backing up makefile: drivers/bcma/Makefile.bk
Backing up makefile: drivers/misc/eeprom/Makefile.bk
Backup exists: Makefile.bk

mcgrof@flash ~/devel/compat-wireless (git::master)$ ckmake
Trying kernel  3.4.0-030400rc4-generic [OK]
Trying kernel  3.3.3-030303-generic [OK]
Trying kernel  3.2.2-030202-generic [OK]
Trying kernel  3.1.10-030110-generic [OK]
Trying kernel  3.0.18-030018-generic [OK]
Trying kernel  2.6.39-02063904-generic [OK]
Trying kernel  2.6.38-02063808-generic [OK]
Trying kernel  2.6.37-02063706-generic [OK]
Trying kernel  2.6.36-02063604-generic [OK]
Trying kernel  2.6.35-02063512-generic [OK]
Trying kernel  2.6.34-02063410-generic [OK]
Trying kernel  2.6.33-02063305-generic [OK]
Trying kernel  2.6.32-02063255-generic [OK]
Trying kernel  2.6.31-02063113-generic [OK]
Trying kernel  2.6.30-02063010-generic [OK]
Trying kernel  2.6.29-02062906-generic [OK]
Trying kernel  2.6.28-02062810-generic [OK]
Trying kernel  2.6.27-020627-generic [OK]
Trying kernel  2.6.26-020626-generic [OK]
Trying kernel  2.6.25-020625-generic [OK]
Trying kernel  2.6.24-020624-generic [OK]

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix compilation of ti/wlcore/main.c

Forgot to propagate the irq name change.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120628

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: remove patches/49-rename_path_lookup.patch

This is no longer required as this was addressed upstream via:

commit 5ad20dd1480dc557afcec19ac7fae5581264dd59
Author: Luis R. Rodriguez <mcgrof@frijolero.org>
Date:   Tue Feb 7 21:09:25 2012 -0800

    mac80211: rename mesh static path_lookup()

    If you want to use mesh support from mac80211 on a recent
    kernel on 2.6.24 you'll run into a name clash when compiling
    against include/linux/namei.h, so rename this routine.

    /home/mcgrof/tmp/compat-wireless-3.2.5-1/net/mac80211/mesh_pathtbl.c: At top level:
    /home/mcgrof/tmp/compat-wireless-3.2.5-1/net/mac80211/mesh_pathtbl.c:342:26: error: conflicting types for ‘path_lookup’
    include/linux/namei.h:71:12: note: previous declaration of ‘path_lookup’ was here

    Although this could sit as a separate patch in compat-wireless it seems
    best to just merge upstream.

Cc: Javier Cardona <javier@cozybit.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>
Acked-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix patches/44-deactivate-mac80211-tracing.patch

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix patches/09-threaded-irq.patch

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add patch to fix message tracing in mac80211

Just like in iwlwifi, the tracing in mac80211 needs to
copy va_args as some old kernels don't do it for %pV.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120622

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: skip name space changes on rtnl_notify()

Just avoid the namespace support for older kernels.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

See the description in the file -- the current code
is safe only on recent upstream kernels, with 3.1
for example it can crash. The new code is safe on
all kernels that even support %pV, others just get
a pointer unfortunately.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: Naturally sort patch prefixes

Use ls -v to get a naturally sorted list of patches like:

patches/00-vga_switcheroo_client_ops.patch
patches/01-dma_buf_ops-addition.patch
patches/02-revert-vm_mmap.patch
patches/98-pr_fmt.patch
patches/99-change-makefile.patch
patches/9999-FIXME-dont-build-i915-for-i2c-problems.patch

instead of:

patches/00-vga_switcheroo_client_ops.patch
patches/01-dma_buf_ops-addition.patch
patches/02-revert-vm_mmap.patch
patches/98-pr_fmt.patch
patches/9999-FIXME-dont-build-i915-for-i2c-problems.patch
patches/99-change-makefile.patch

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120621

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: Suck in ckmake from compat.git

ckmake can be used directly to test compat-foo trees against the
installed kernel trees. So it is good to have it copied under
this tree.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>

compat-wireless: skip forcing refresh on gen-stable-release.sh

When gen-stable-release.sh is used we were forcing a refresh
but this breaks usage of gen-stable-release.sh -s -n -p -c
so just skip the refresh for now.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: update initramfs upon uninstall

This is needed upon uninstallation.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: remove alx and atl1c drivers upon uninstallation

We were only removing atl1c drivers before.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: move alx pending patches to crap

The alx driver needs to remove the old devices that atl1c
already supports. This work is being done but users can
still use the alx driver. To help these users move the
alx patch to crap/ and add a new patch that disables all
the atl1c devices from the alx driver. This means we no
longer need a script to disable atlc.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: update directory paths for Atheros Ethernet drivers

This is used when git grep'ing out for stable patches with
./scripts/admin-update.sh -s

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix stable alias on admin-update.sh

When running ./scripts/admin-update.sh -s -- the code will look
for all pathces on linux-next since the current head tag on the
stable release we are on that have the stable@kernel.org
on the commit log. The e-mail address alias has changed
to stable@vger.kernel.org. This patch updates that alias so
we can continue to run:

./scripts/admin-update.sh -s

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120614

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: remove patches/63-request_module_nowait.patch

This is no longer required due to patch:

commit d4b10483223cf1a3fd2057785b12e2790a961867
Author: Johannes Berg <johannes.berg@intel.com>
Date:   Tue Jun 12 19:50:43 2012 +0200

    iwlwifi: use request_module instead of _nowait

    Since request_module_nowait() can't be backported
    use request_module() instead -- we don't need the
    asynchronous behaviour of request_module_nowait()
    here since we're running in the firmware request
    work struct.

Tested-by: Donald H Fry <donald.h.fry@intel.com>
Reviewed-by: Donald H Fry <donald.h.fry@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix kernel check for CONFIG_WL18XX

I meant you need at least 2.6.30 so the check should
be for ifdef CONFIG_COMPAT_KERNEL_2_6_30 as if
CONFIG_COMPAT_KERNEL_2_6_30 is defined it means we
have a kernel < 2.6.30

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: enable CONFIG_WL18XX  on >= 2.6.30

Compilation breaks on older kernels.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add TI WiLink 8 chipsets support

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120612

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: address intel wireless driver file rename

I like dark beers, and amber beers... Just saying.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix patches/09-threaded-irq.patch

I'm tired of seeing this patch fail so I've moved
the struct that we add to the front. Each time the
data structure changes elements are added towards the
end, not the beginning. Hopefully this means we'll
have less required updates on this hunk! Only time
will tell.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: address usage of request_module_nowait() on iwlwifi

request_module_nowait() was added on 2.6.30 but we can't
backport it. Under some circumstances though request_module_nowait()
likely was not meant to be used on purpose and instead we can
assume request_module() will work. This patch addresses the few
places where request_module_nowait() was used but that we can
at least somewhat assume that this can work. We do not backport
this into compat.git as a direct static inline given that there
are surely some places where request_module() cannot be used.

All users of request_module_nowait() should revise their code and
snsure that is indeed what was meant.

In this patch we address using the regular request_module() on
iwlwifi given that it seems we can use it there. Someone can
hopefully however test and verify this is OK. For newer kernels
that have request_module_nowait() we leave the call.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120608

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: update some urls to git trees in docs

Changes some references to compat and compat-wireless git tree hosted
at git.kernel.org to github and changed some references from wireless-
testing to linux-next and linux-2.6-allstable to linux-stable.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix syntax error introduced recently

A closing parenthesis was accentually removed in this commit:
ommit 86596a46269e9b317ef3ee92f21453320d855018
Author: Luis R. Rodriguez <mcgrof@frijolero.org>
Date:   Tue May 29 12:50:42 2012 -0700

    compat-wireless: fix patches/24-pcmcia.patch for next-20120524

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add additional header file for bluetooth

This fixes a compile problem with all kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120529 again

After applying Hauke's patches I needed to refresh the patches.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add include/net/bluetooth/{hci_mon.h,sco.h}

These two header files used by the bluetooth system are not included in
compat-wireless, but should be.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add bluetooth to sdio suspend remove patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add bluetooth to pr_fmt patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add asm/unaligned.h include to ath6kl

Some old kernel versions are missing this include and we get a compile
error because of missing get_unaligned_le16() prototype.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add linux/compat.h header

For some older kernel versions we have to include linux/compat.h in
some bluetooth code, otherwise it will not find functions like
compat_ptr().

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: deactivate wl1251 for kernel < 2.6.37

wl1251_sdio and wl1251_spi are depending on irq_set_status_flags() since

commit f380f2c4a12e913356bd49f8790ec1063c4fe9f8
Author: Grazvydas Ignotas <notasas@gmail.com>
Date:   Fri May 18 03:04:08 2012 +0300

    wl1251: fix oops on early interrupt

irq_set_status_flags() was added to the kernel in version 2.6.37 and
backporting it is hard, so do not build wl1251_sdio and wl1251_spi for
older kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add usb driver lpm

This adds a patch to backport:
commit e1f12eb6ba6f1e74007eb01ed26fad7c5239d62b
Author: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date:   Mon Apr 23 10:08:51 2012 -0700

    USB: Disable hub-initiated LPM for comms devices.

This patch should be replaced with something in compat, but I do not
have the time now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120529

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120524

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix patches/46-use_other_workqueue.patch for next-20120524

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix patches/24-pcmcia.patch for next-20120524

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix b/patches/16-bluetooth.patch for next-20120524

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix patches/05-usb.patch for next-20120524

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: remove patches/51-in-header.patch

This is no longer required as the respective upstream patch
is already merged.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-wireless: fix patches/11-dev-pm-ops.patch

One hunk no longer applied.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-wireless: copy over rndis.h

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120516

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix patches/09-threaded-irq.patch

The offsets were off. Simple fix.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add support for COMPAT_BASE version prinout

The COMPAT_BASE prints out the tag from where we pulled
compat.git code from. This is useful when debugging code
and verifying what version of compat was used.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: remove master-tag file

The master-tag file was used to describe from where we pulled
code from when wireless-testing was used instead of linux-next.git.
It turns out the way this was being done could lead to incorrect
descriptions given that the master-tag file was generated by
looking at all the git tags present and using the latest master
tag. The assumption is that your tree would not have any newer
master tags. Turns out that we can use git describe to extract
correctly the proper master tag, at least now this seems to work
well on wireless-testing. Even if it does not work the git describe
tag is a better representation and would lead to less mistakes.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120511

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: copy compat/*.h files as well

Not all header files within compat need to export data to
userspace, these files are located in compat/compat/*.h,
so copy them over.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: synch with next-20120504

Happy cinco de Mayo.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add support for CONFIG_HID_GENERIC

The HID driver code was moved to a separate module under
CONFIG_HID_GENERIC. We remove the old code that had patched
support for it given that ifdef'd code around calls to
hid_register_driver() and friends given that this was only
available on kernels >= 2.6.28. We simply only compile the
code in question on newer kernels.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add skip-colors to refresh-compat

This lets us run ckmake on standalone development trees.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: license under ISC files for standalone builds

This licenses under the ISC license scripts/refresh-compat,
scripts/refresh-compat-local and the top level Makefile to help
standalone development code be ISC licensed. The goal is to help
a standalone development tree to be used to target either Linux
or BSD.

In the Linux target case although the files may be ISC licensed, as it
was discussed on lkml [0] the run time license of the module will
still be GPL, so no one should even think that they can make proprietary
or BSD-licensed only modules out of the Linux kernel with this framework.

The goal is to let a standalone git tree exist and allow modules to be
build either for Linux or BSd.

[0] http://article.gmane.org/gmane.linux.kernel/1278784

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wirless: prefix release files with dot

This prefixes these files with a dot:

compat_base_tree -->         .compat_base_tree
compat_base_tree_version --> .compat_base_tree_version
compat_version -->           .compat_version

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireles: add scripts to help standalone development trees

This adds a set of scripts to help you use compat-wireless to maintain
standalone development trees that use compat-wireless and synch with it.

An example standalone development git tree will be provided later.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120501

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120430

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

Revert "compat-wireless: add sched.h on libertas/firmware.c"

This reverts commit 2010bb84bc7e5e711c84a09ce0690348d6683c12.

compat-wireless: fix patches/24-pcmcia.patch

The variable name to the data structure changed.

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120427

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix patches/53-pr_fmt.patch

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120424

mcgrof@flash ~/devel/compat-wireless (git::master)$ ckmake
Trying kernel                  3.4.0-030400rc4-generic  [OK]
Trying kernel                     3.3.3-030303-generic  [OK]
Trying kernel                     3.2.2-030202-generic  [OK]
Trying kernel                    3.1.10-030110-generic  [OK]
Trying kernel                    3.0.18-030018-generic  [OK]
Trying kernel                  2.6.39-02063904-generic  [OK]
Trying kernel                  2.6.38-02063808-generic  [OK]
Trying kernel                  2.6.37-02063706-generic  [OK]
Trying kernel                  2.6.36-02063604-generic  [OK]
Trying kernel                  2.6.35-02063512-generic  [OK]
Trying kernel                  2.6.34-02063410-generic  [OK]
Trying kernel                  2.6.33-02063305-generic  [OK]
Trying kernel                  2.6.32-02063255-generic  [OK]
Trying kernel                  2.6.31-02063113-generic  [OK]
Trying kernel                  2.6.30-02063010-generic  [OK]
Trying kernel                  2.6.29-02062906-generic  [OK]
Trying kernel                  2.6.28-02062810-generic  [OK]
Trying kernel                    2.6.27-020627-generic  [OK]
Trying kernel                    2.6.26-020626-generic  [OK]
Trying kernel                    2.6.25-020625-generic  [OK]
Trying kernel                    2.6.24-020624-generic  [OK]

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: fix patches/24-pcmcia.patch

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: adjust pr_fmt patch some more

Only printk.h is neeeded, no need to include kernel.h

mcgrof@flash ~/devel/compat-wireless (git::master)$ time ckmake; time ckmake
Trying kernel                  3.4.0-030400rc4-generic  [OK]
Trying kernel                     3.3.3-030303-generic  [OK]
Trying kernel                     3.2.2-030202-generic  [OK]
Trying kernel                    3.1.10-030110-generic  [OK]
Trying kernel                    3.0.18-030018-generic  [OK]
Trying kernel                  2.6.39-02063904-generic  [OK]
Trying kernel                  2.6.38-02063808-generic  [OK]
Trying kernel                  2.6.37-02063706-generic  [OK]
Trying kernel                  2.6.36-02063604-generic  [OK]
Trying kernel                  2.6.35-02063512-generic  [OK]
Trying kernel                  2.6.34-02063410-generic  [OK]
Trying kernel                  2.6.33-02063305-generic  [OK]
Trying kernel                  2.6.32-02063255-generic  [OK]
Trying kernel                  2.6.31-02063113-generic  [OK]
Trying kernel                  2.6.30-02063010-generic  [OK]
Trying kernel                  2.6.29-02062906-generic  [OK]
Trying kernel                  2.6.28-02062810-generic  [OK]
Trying kernel                    2.6.27-020627-generic  [OK]
Trying kernel                    2.6.26-020626-generic  [OK]
Trying kernel                    2.6.25-020625-generic  [OK]
Trying kernel                    2.6.24-020624-generic  [OK]

real    94m39.991s
user    287m51.955s
sys     26m37.828s

real    18m20.621s
user    41m8.998s
sys     8m59.742s

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add sched.h on libertas/firmware.c

sched.h is required to compile users of wake_up(),
firmware.c somehow gets sched.h included on newer kernels
but on older kernels this is not happening so include
this on the file itself. This patch should and will
be sent upstream.

This fixes this compilation error:

/home/mcgrof/devel/compat-wireless/drivers/net/wireless/libertas/firmware.c: In function ‘lbs_fw_loaded’:
/home/mcgrof/devel/compat-wireless/drivers/net/wireless/libertas/firmware.c:26:29: error: ‘TASK_NORMAL’ undeclared (first use in this function)
/home/mcgrof/devel/compat-wireless/drivers/net/wireless/libertas/firmware.c:26:29: note: each undeclared identifier is reported only once for each function it appears in
/home/mcgrof/devel/compat-wireless/drivers/net/wireless/libertas/firmware.c: In function ‘lbs_wait_for_firmware_load’:
/home/mcgrof/devel/compat-wireless/drivers/net/wireless/libertas/firmware.c:110:260: error: ‘TASK_UNINTERRUPTIBLE’ undeclared (first use in this function)
/home/mcgrof/devel/compat-wireless/drivers/net/wireless/libertas/firmware.c:110:2: error: implicit declaration of function ‘schedule’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors

make[4]: *** [/home/mcgrof/devel/compat-wireless/drivers/net/wireless/libertas/firmware.o] Error 1

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: few more pr_fmt fixes for drivers

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120423

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: add an extra include to ath6kl/htc_pipe.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: build alx for kernel > 2.6.27

When compiling against kernel <= 2.6.27 alx has build errors so use
atl1c there instead. The logic was wrong before.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: deactivate CONFIG_BT_RFCOMM_TTY for old kernel versions.

net/bluetooth/rfcomm/tty.c does not build on older kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: ath6kl: add config options for SDIO and USB

ath6kl now supports USB and SDIO based devices, this patch adds the
config options for them.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: brcmfmac: add usb config option

This activates the usb part of brcmfmac.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>