Jo-Philipp Wich [Tue, 24 May 2011 09:14:35 +0000 (09:14 +0000)]
kernel: kmod-crypto-iv depends on kmod-crypto-manager Add a missing dependency to kmod-crypto-iv. chainiv.ko and eseqiv.ko from kmod-crypto-iv depend on crypto_blkcipher.ko from kmod-crypto-manager.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26984
Jo-Philipp Wich [Tue, 24 May 2011 09:12:50 +0000 (09:12 +0000)]
dnsmasq: allow hostname assignment without static lease The attached patch for dnsmasq.init allows to assign a hostname to a particular mac-address. It's useful to override the client supplied hostname, especially if the client does not supply a hostname at all.
It corresponds to the following example in dnsmasq.conf.example:
# Always set the name of the host with hardware address
# 11:22:33:44:55:66 to be "fred"
#dhcp-host=11:22:33:44:55:66,fred
Regards
Mathias
SVN-Revision: 26983
Jo-Philipp Wich [Tue, 24 May 2011 08:14:29 +0000 (08:14 +0000)]
package u32 match and TEE target, patches by Maxim Uvarov
SVN-Revision: 26977
Jo-Philipp Wich [Sun, 22 May 2011 16:53:09 +0000 (16:53 +0000)]
ncurses: enable C++ bindings (#9442)
SVN-Revision: 26970
Jo-Philipp Wich [Sun, 22 May 2011 12:02:35 +0000 (12:02 +0000)]
iw: fix calculation of fractional multicast rates like 5.5Mbps due to wrong operator precedence
SVN-Revision: 26968
Felix Fietkau [Fri, 20 May 2011 16:21:30 +0000 (16:21 +0000)]
add LD_LIBRARY to cmake.mk
Otherwise cmake programs try to link with host ld.so
Signed-off-by: Jan Willies <jan@willies.info>
SVN-Revision: 26963
Jo-Philipp Wich [Fri, 20 May 2011 13:45:40 +0000 (13:45 +0000)]
firewall: explictely mention network in default configuration, makes it less confusing
SVN-Revision: 26961
Florian Fainelli [Fri, 20 May 2011 10:06:25 +0000 (10:06 +0000)]
add support for BT Voyager 2110 (#8810)
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
SVN-Revision: 26959
Florian Fainelli [Fri, 20 May 2011 10:06:22 +0000 (10:06 +0000)]
add support for DSL-2640B rev B2
Signed-off-by: Adrian Feliks <mexit@o2.pl>
SVN-Revision: 26958
Florian Fainelli [Fri, 20 May 2011 10:06:18 +0000 (10:06 +0000)]
refresh patches
SVN-Revision: 26957
Florian Fainelli [Fri, 20 May 2011 10:06:15 +0000 (10:06 +0000)]
add support for D-Link DVA-G3810BN/TL
This patch adds support for D-Link's DVA-G3810BN/TL product.
Signed-off-by: Roman Dumycz <roman@secureas.com>
SVN-Revision: 26956
Florian Fainelli [Fri, 20 May 2011 10:06:11 +0000 (10:06 +0000)]
refresh 2.6.37 patches
SVN-Revision: 26955
Florian Fainelli [Fri, 20 May 2011 10:06:07 +0000 (10:06 +0000)]
add support for BT Voyager 2500 (#9070)
SVN-Revision: 26954
Florian Fainelli [Fri, 20 May 2011 10:06:04 +0000 (10:06 +0000)]
add support for USR9108 LEDs (#9372)
SVN-Revision: 26953
Florian Fainelli [Fri, 20 May 2011 10:06:00 +0000 (10:06 +0000)]
add GT701 LEDs support (#9382)
SVN-Revision: 26952
Felix Fietkau [Thu, 19 May 2011 10:08:02 +0000 (10:08 +0000)]
broadcom-wl: fix wild ssb_device accesses as pci_dev for legacy pci dma api
broadcom-wl driver bound to ssb device with ssb driver probe
have osh handle struct pdev pointer value initialized with
ssb_device pointer. Later on pdev is used with legacy pci
dma api as pci_dev thus causing oops sometimes.
The patch replaces legacy pci dma api and pass relevant
device struct pointer to avoid crashes.
Signed-off-by: George Kashperko <george@znau.edu.ua>
SVN-Revision: 26949
Felix Fietkau [Thu, 19 May 2011 10:07:57 +0000 (10:07 +0000)]
broadcom-wl: fix uninitialized variable
It was causing an occasional kernel oops.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 26948
Felix Fietkau [Thu, 19 May 2011 09:33:45 +0000 (09:33 +0000)]
ath9k: fix some locking issues in the tx fifo cleanup patch
SVN-Revision: 26947
Daniel Dickinson [Thu, 19 May 2011 04:29:40 +0000 (04:29 +0000)]
Simple typo for kmod- prefix in alix2 target makefile.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26945
Hamish Guthrie [Wed, 18 May 2011 12:43:54 +0000 (12:43 +0000)]
Remove override of max80211.sh
SVN-Revision: 26936
Felix Fietkau [Wed, 18 May 2011 12:03:08 +0000 (12:03 +0000)]
ath9k: clean up tx fifo handling on ar9380 based hardware
SVN-Revision: 26934
Felix Fietkau [Wed, 18 May 2011 12:03:04 +0000 (12:03 +0000)]
ath9k: fix a small race condition in the tx_last_beacon patch
SVN-Revision: 26933
Hamish Guthrie [Wed, 18 May 2011 11:50:36 +0000 (11:50 +0000)]
Move beagleboard base-files to beagleboard sub-target, remove unused mac80211.sh
SVN-Revision: 26932
Jo-Philipp Wich [Wed, 18 May 2011 09:50:06 +0000 (09:50 +0000)]
ipcalc.sh CIDR notation Hi,
the attached patch makes ipcalc.sh accept IP/Netmask combinations in
CIDR notation. Before you could only do:
# sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
with this patch you can also execute it with:
sh ipcalc.sh 192.168.0.0/24 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
The patch is based on #1260 [1], i just changed one line to calculate
the START end END ips right. I wonder why that never got included. If
there is no reason not to do i would like to ask you to commit that
patch, because its a functionality i (and probably others) miss quite often.
Btw, i also fixed 4 useless tabs, that might look a bit strange in the
patch.
Regards, Manuel
SVN-Revision: 26930
Felix Fietkau [Tue, 17 May 2011 18:23:50 +0000 (18:23 +0000)]
mac80211: sync the CONFIG_ATH5K_DEBUG make override with the buildflags override (thx, KanjiMonster)
SVN-Revision: 26927
Felix Fietkau [Tue, 17 May 2011 12:54:45 +0000 (12:54 +0000)]
metadata: do not emit feature flag selects for targets which have subtargets - fixes a buildbot error cause by ssb not being blacklisted for lantiq falcon
SVN-Revision: 26926
Matteo Croce [Tue, 17 May 2011 11:15:24 +0000 (11:15 +0000)]
ar71xx: don't probe the LAN PHY
SVN-Revision: 26924
Felix Fietkau [Tue, 17 May 2011 11:14:15 +0000 (11:14 +0000)]
ath9k: implement tx_last_beacon() to allow mac80211 to respond to probe requests in ad-hoc mode without creating too much spam
SVN-Revision: 26923
Matteo Croce [Tue, 17 May 2011 11:12:56 +0000 (11:12 +0000)]
ar71xx: detect link on LAN ports
SVN-Revision: 26922
John Crispin [Tue, 17 May 2011 10:48:37 +0000 (10:48 +0000)]
* add missing aes dependency to mv_cesa
Signed-off-by: Jan Willies <jan@willies.info>
SVN-Revision: 26920
John Crispin [Tue, 17 May 2011 10:35:14 +0000 (10:35 +0000)]
* adds support for Artec Thincan
Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com>
SVN-Revision: 26919
John Crispin [Tue, 17 May 2011 10:33:46 +0000 (10:33 +0000)]
* adds mkelfimage
SVN-Revision: 26918
Felix Fietkau [Tue, 17 May 2011 08:37:38 +0000 (08:37 +0000)]
ath9k: fix ad-hoc nexttbtt calculation, which broke beacon transmission in some instances
SVN-Revision: 26915
Felix Fietkau [Mon, 16 May 2011 21:50:30 +0000 (21:50 +0000)]
ath9k: fix issues with ad-hoc beacon slot selection
SVN-Revision: 26913
Felix Fietkau [Mon, 16 May 2011 21:50:26 +0000 (21:50 +0000)]
mac80211: update to 2011-05-13
SVN-Revision: 26912
Felix Fietkau [Mon, 16 May 2011 21:50:20 +0000 (21:50 +0000)]
kernel: backport some ssb changes to support a mac80211 update
SVN-Revision: 26911
Jo-Philipp Wich [Sun, 15 May 2011 21:28:12 +0000 (21:28 +0000)]
remove an accidentally copied comment from the option.ko device patch
SVN-Revision: 26908
Jo-Philipp Wich [Sun, 15 May 2011 19:17:31 +0000 (19:17 +0000)]
add definitions for Alcatel X220D and Huawai E173s to option.ko (#9422)
SVN-Revision: 26906
Hauke Mehrtens [Sun, 15 May 2011 17:23:02 +0000 (17:23 +0000)]
kernel: update kernel from 2.6.38.2 to 2.6.38.6 and refresh patches
Thank you Peter Wagner for the patch. I refreshed the kernel patches and added the md5sum of the kernel.
SVN-Revision: 26905
Vasilis Tsiligiannis [Sun, 15 May 2011 09:37:35 +0000 (09:37 +0000)]
package/kernel: crypto: Remove renamed modules hack
Since the oldest kernel in trunk is 2.6.30 the modules always use the
newer names, so we can just use the _generic prefix directly.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26903
Vasilis Tsiligiannis [Sun, 15 May 2011 09:37:32 +0000 (09:37 +0000)]
package/kernel: netfilter: Remove 2.4/2.6 references
There's only 2.6, so it doesn't make sense to mention modules that are
2.4 only or for modules that they are available only for 2.6.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26902
Vasilis Tsiligiannis [Sun, 15 May 2011 09:37:28 +0000 (09:37 +0000)]
package/kernel: Remove all 2.4 definitions
With no 2.4 support in trunk, we can safely remove any 2.4 definitions for
kmods and merge the 2.6 definitions into the generic ones.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26901
Vasilis Tsiligiannis [Sun, 15 May 2011 09:37:24 +0000 (09:37 +0000)]
package/kernel: Remove $(KMOD_SUFFIX) usage
Since there's only 2.6 in trunk $(KMOD_SUFFIX) can be safely replaced with
ko for all mainline kernel modules.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26900
Matteo Croce [Sat, 14 May 2011 23:31:50 +0000 (23:31 +0000)]
ar71xx: add link detection on Ubiquiti devices WAN port
SVN-Revision: 26891
Matteo Croce [Sat, 14 May 2011 23:10:06 +0000 (23:10 +0000)]
use correct macros and frame size in ag71xx
SVN-Revision: 26890
Matteo Croce [Sat, 14 May 2011 23:08:00 +0000 (23:08 +0000)]
ar71xx: cosmetic fixes
SVN-Revision: 26889
Hamish Guthrie [Fri, 13 May 2011 11:52:40 +0000 (11:52 +0000)]
Correct libc path
SVN-Revision: 26885
Hamish Guthrie [Fri, 13 May 2011 11:49:52 +0000 (11:49 +0000)]
Add new defconfig and profile for es variant
SVN-Revision: 26884
Hamish Guthrie [Fri, 13 May 2011 10:36:39 +0000 (10:36 +0000)]
Squash uids
SVN-Revision: 26883
Daniel Dickinson [Fri, 13 May 2011 07:23:11 +0000 (07:23 +0000)]
Removed Alix.mk profile which was accidently left as an empty file applying the patch during r26879 and r26880.
SVN-Revision: 26882
Daniel Dickinson [Fri, 13 May 2011 06:08:49 +0000 (06:08 +0000)]
Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.
GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)
GPIO 24 : Soft switch 1
No kernel version bump. Added i2c-scx200-acb for lm-sensors support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26880
Daniel Dickinson [Fri, 13 May 2011 06:06:42 +0000 (06:06 +0000)]
This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.
GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)
GPIO 24 : Soft switch 1
No kernel version bump. Added i2c-scx200-acb for lm-sensors support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26879
Florian Fainelli [Wed, 11 May 2011 13:34:14 +0000 (13:34 +0000)]
bcm63xx: Add support for the T-Home Speedport W 303V
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26878
Florian Fainelli [Wed, 11 May 2011 13:34:05 +0000 (13:34 +0000)]
bcm63xx: Add firmware helpers for T-Home Speedport W 303V
Add two helpers for generating correctly tagged images for the T-Home
Speedport W 303V Typ B as well as xor'd ones as required by CFE.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26877
Florian Fainelli [Wed, 11 May 2011 13:33:50 +0000 (13:33 +0000)]
bcm63xx: Update support for the DSL-274xB revision C
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.
While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26876
Florian Fainelli [Wed, 11 May 2011 13:33:45 +0000 (13:33 +0000)]
bcm63xx: Accept any led with power in its name as power led
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26875
Florian Fainelli [Wed, 11 May 2011 13:33:41 +0000 (13:33 +0000)]
bcm63xx: Decouple Board ID and image name for fixup
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26874
Florian Fainelli [Wed, 11 May 2011 13:33:34 +0000 (13:33 +0000)]
switch to 2.6.38
SVN-Revision: 26873
Florian Fainelli [Wed, 11 May 2011 13:33:30 +0000 (13:33 +0000)]
add missing 2.6.38 touchscreen config symbols
SVN-Revision: 26872
John Crispin [Mon, 9 May 2011 20:28:04 +0000 (20:28 +0000)]
package/kernel/modules/other.mk is getting big enough that putting the LEDs stuff into its own file makes sense.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26868
John Crispin [Mon, 9 May 2011 15:21:58 +0000 (15:21 +0000)]
(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
This patch adds 802.1Q VLAN support for the ADM6996M chip.
The driver is loaded for both the FC and M model. It will detect which of the
two chips is connected. The FC model is initialised, but no further
functionality is offered.
The PHY driver will always report "100 Mbit/s, link up", for both the M and FC
models. This reflects the fact that the link between switch chip and Ethernet
MAC is always on[1].
Further documentation can be found in the kernel's
Documentation/networking/adm6996.txt
Signed-of-By: Peter Lebbing <peter@digitalbrains.com>
SVN-Revision: 26865
Gabor Juhos [Sun, 8 May 2011 21:38:51 +0000 (21:38 +0000)]
ar71xx: populate LED3 on the JA76PF board
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>
SVN-Revision: 26862
Gabor Juhos [Sun, 8 May 2011 21:38:49 +0000 (21:38 +0000)]
ar71xx: add uci config for the WLAN LED on the WRT160NL
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>
SVN-Revision: 26861
Gabor Juhos [Sun, 8 May 2011 21:38:48 +0000 (21:38 +0000)]
ar71xx: use phy0tpt trigger for the WLAN LEDs
SVN-Revision: 26860
Gabor Juhos [Sun, 8 May 2011 21:38:46 +0000 (21:38 +0000)]
ar71xx: remove superfluous fifo_cfg overrides
SVN-Revision: 26859
Travis Kemen [Sun, 8 May 2011 17:08:06 +0000 (17:08 +0000)]
ipv6: restore correct ECN handling on TCP xmit Thanks Dave Taht
SVN-Revision: 26858
Travis Kemen [Sun, 8 May 2011 17:03:07 +0000 (17:03 +0000)]
Deployment of IPv6 has opened up many more prefixes than just the 2000::/3 space, so a default route of ::/0 is more correct. Thanks Dave Taht
SVN-Revision: 26857
Gabor Juhos [Sun, 8 May 2011 16:32:53 +0000 (16:32 +0000)]
ar71xx: ag71xx: make switch register access atomic
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.
This is easily noticable during an iperf session:
...
[ 3] 52.0-53.0 sec 11.3 MBytes 94.4 Mbits/sec
[ 3] 53.0-54.0 sec 11.4 MBytes 95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[ 3] 54.0-55.0 sec 6.75 MBytes 56.6 Mbits/sec
[ 3] 55.0-56.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 56.0-57.0 sec 10.5 MBytes 88.1 Mbits/sec
...
[ 3] 169.0-170.0 sec 11.4 MBytes 95.4 Mbits/sec
[ 3] 170.0-171.0 sec 11.4 MBytes 95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[ 3] 171.0-172.0 sec 7.63 MBytes 64.0 Mbits/sec
[ 3] 172.0-173.0 sec 9.38 MBytes 78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[ 3] 173.0-174.0 sec 11.3 MBytes 94.4 Mbits/sec
[ 3] 174.0-175.0 sec 11.4 MBytes 95.4 Mbits/sec
SVN-Revision: 26856
Gabor Juhos [Sun, 8 May 2011 13:30:36 +0000 (13:30 +0000)]
ar71xx: ag71xx: fix section mismatch warnings
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.
The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.
SVN-Revision: 26855
Gabor Juhos [Sun, 8 May 2011 13:30:26 +0000 (13:30 +0000)]
ar71xx: ag71xx: fix build error if debugfs is enabled
SVN-Revision: 26854
Jo-Philipp Wich [Sun, 8 May 2011 10:25:58 +0000 (10:25 +0000)]
base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others (#9352)
SVN-Revision: 26848
Hauke Mehrtens [Sat, 7 May 2011 12:49:17 +0000 (12:49 +0000)]
brcm47xx: update patches
SVN-Revision: 26846
Gabor Juhos [Sat, 7 May 2011 12:40:34 +0000 (12:40 +0000)]
ar71xx: ag71xx: add debugfs entry for [rt]x_ring
SVN-Revision: 26845
Gabor Juhos [Sat, 7 May 2011 12:40:28 +0000 (12:40 +0000)]
ar71xx: ag71xx: add timestamps to ag71xx_buf
SVN-Revision: 26844
Gabor Juhos [Sat, 7 May 2011 12:40:26 +0000 (12:40 +0000)]
ar71xx: ag71xx: use dynamically allocated buffer for napi_stats
SVN-Revision: 26843
Gabor Juhos [Sat, 7 May 2011 12:40:25 +0000 (12:40 +0000)]
ar71xx: ag71xx: use debugfs_remove_recursive
SVN-Revision: 26842
Gabor Juhos [Sat, 7 May 2011 09:23:33 +0000 (09:23 +0000)]
base-files: fix a typo in etc/banner
SVN-Revision: 26841
Gabor Juhos [Sat, 7 May 2011 09:23:32 +0000 (09:23 +0000)]
ar71xx: override wmac device name for the AR934x SoCs
SVN-Revision: 26840
Florian Fainelli [Fri, 6 May 2011 12:37:40 +0000 (12:37 +0000)]
remove useless patches
SVN-Revision: 26837
Florian Fainelli [Fri, 6 May 2011 12:37:36 +0000 (12:37 +0000)]
fill maintainer infos for a couple of targets
SVN-Revision: 26836
Florian Fainelli [Thu, 5 May 2011 16:35:44 +0000 (16:35 +0000)]
update to 2.6.38.2
SVN-Revision: 26833
Florian Fainelli [Thu, 5 May 2011 16:35:40 +0000 (16:35 +0000)]
add missing 2.6.38 symbols
SVN-Revision: 26832
Hauke Mehrtens [Thu, 5 May 2011 14:05:21 +0000 (14:05 +0000)]
brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.
SVN-Revision: 26829
Hauke Mehrtens [Thu, 5 May 2011 13:18:35 +0000 (13:18 +0000)]
brcm47xx: fix typo in patch
SVN-Revision: 26828
Alexandros C. Couloumbis [Thu, 5 May 2011 07:19:46 +0000 (07:19 +0000)]
linux/ar71xx: add some missing symbols for nand/yaffs targets
SVN-Revision: 26827
Jo-Philipp Wich [Wed, 4 May 2011 14:51:06 +0000 (14:51 +0000)]
lua: remove posix from Lua core, almost nothing uses it - saves 9k compressed
SVN-Revision: 26822
Felix Fietkau [Wed, 4 May 2011 14:35:35 +0000 (14:35 +0000)]
ath9k: add noise floor calibration fix that should improve stability
SVN-Revision: 26819
Alexandros C. Couloumbis [Wed, 4 May 2011 09:35:06 +0000 (09:35 +0000)]
linux/generic: port yaffs to 2.6.39
SVN-Revision: 26818
Alexandros C. Couloumbis [Wed, 4 May 2011 08:47:00 +0000 (08:47 +0000)]
linux/rb532: use kernel and initramfs tags on image generation
SVN-Revision: 26817
Jo-Philipp Wich [Wed, 4 May 2011 08:19:07 +0000 (08:19 +0000)]
comgt: add tty hotplug remove handling, only iterate each tty once (#9211)
SVN-Revision: 26816
Jo-Philipp Wich [Tue, 3 May 2011 21:25:36 +0000 (21:25 +0000)]
kernel: revert r26814
SVN-Revision: 26815
Jo-Philipp Wich [Tue, 3 May 2011 21:22:43 +0000 (21:22 +0000)]
kernel: add kmod-crypto-ipsec kmod-crypto-ipsec bundles some otherwise unprovided kernel crypto modules that are useful for IPSEC. This is an alternative to breaking these modules out into kmod-crypto-wq (crypto_wq.ko), kmod-crypto-rng (rng.ko and krng.ko), and kmod-crypto-iv (eseqiv.ko and chainiv.ko).
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26814
Jo-Philipp Wich [Tue, 3 May 2011 21:21:05 +0000 (21:21 +0000)]
kernel: add kmod-crypto-{wq,rng,iv} Add kmod-crypto-iv as a dependency for kmod-ipsec. Also remove the extraneous kmod-crypto-core dependency to eliminate recursion.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26813
Jo-Philipp Wich [Tue, 3 May 2011 21:19:56 +0000 (21:19 +0000)]
kernel: add kmod-crypto-{wq,rng,iv} This patch adds kmod-crypto-wq, kmod-crypto-rng, and kmod-crypto-iv packages. These packages provide some missing kernel crypto modules which are required for IPSEC. The strongswan4, ipsec-tools, and possibly other IPSEC packages do not work properly without these modules.
NOTE: The KCONFIG associated with each of these modules gets selected
whenever CRYPTO_MANAGER (kmod-crypto-manager) is selected so these
modules are already being built.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26812
Jo-Philipp Wich [Tue, 3 May 2011 21:18:12 +0000 (21:18 +0000)]
geos: remove unneeded modules The via-sata and gpio-nsc modules are both unneeded on the Geos platform.
SVN-Revision: 26811
Jo-Philipp Wich [Tue, 3 May 2011 19:45:55 +0000 (19:45 +0000)]
comgt: move ifup invocation back into background subshell to prevent hotplug deadlocks
SVN-Revision: 26810
Jo-Philipp Wich [Tue, 3 May 2011 19:39:13 +0000 (19:39 +0000)]
comgt: move 3g hotplug handling to tty subsystem, fixes race on coldplug (#9211)
SVN-Revision: 26809
Jo-Philipp Wich [Tue, 3 May 2011 19:37:59 +0000 (19:37 +0000)]
base-files: cleanup permissions of device files in common hotplug rules (#9211)
SVN-Revision: 26808
Jo-Philipp Wich [Tue, 3 May 2011 19:35:58 +0000 (19:35 +0000)]
hotplug2: introduce tty subsystem events (#9211)
SVN-Revision: 26807
Jo-Philipp Wich [Mon, 2 May 2011 12:55:36 +0000 (12:55 +0000)]
firewall: revert accidential committed changes from r26805
SVN-Revision: 26806
projects / openwrt / staging / wigyori.git / log