shaoyunl [Mon, 25 Mar 2019 20:07:23 +0000 (16:07 -0400)]
drm/amdgpu: Adjust TMR address alignment as per HW requirement
According to HW engineer, they prefer the TMR address be "naturally aligned", e.g. the start address
must be an integer divide of TME size.
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily Deng [Thu, 28 Mar 2019 09:29:10 +0000 (17:29 +0800)]
drm/amdgpu: Correct the irq types' num of sdma
Fix the issue about TDR-2 will have "fallback timer expired on ring sdma1".
It is because the wrong number of irq types setting.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Wed, 3 Apr 2019 03:42:15 +0000 (13:42 +1000)]
Merge commit 'refs/for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next
This pull requests adds initial Mali D71 support into the Arm "komeda" DRM
driver. The code has been reviewed at the end of last year, I just been
too slow with pushing it into mainline. Since it started baking in
linux-next we had a kbuild-bot issue raised and one from Joe Perches on
the MAINTAINERS entry, for which I'm including fixes here.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401192833.GW21747@e110455-lin.cambridge.arm.com
Dave Airlie [Wed, 3 Apr 2019 01:36:52 +0000 (11:36 +1000)]
Merge branch 'drm-next-5.2' of git://people.freedesktop.org/~agd5f/linux into drm-next
amdgpu:
- Switch to HMM for userptr (reverted until HMM fixes land)
- New experimental SMU 11 replacement for powerplay for vega20 (not enabled by default)
- Initial RAS support for vega20
- BACO support for vega12
- BACO fixes for vega20
- Rework IH handling for page fault and retry interrupts
- Cleanly split CPU and GPU paths for GPUVM updates
- Powerplay fixes
- XGMI fixes
- Rework how DC interacts with atomic for planes
- Clean up and simplify DC/Powerplay interfaces
- Misc cleanups and bug fixes
amdkfd:
- Switch to HMM for userptr (reverted until HMM fixes land)
- Add initial RAS support
- MQD fixes
ttm:
- Unify DRM_FILE_PAGE_OFFSET handling
- Account for kernel allocations in kernel zone only
- Misc cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190402170820.22197-1-alexander.deucher@amd.com
Alex Deucher [Fri, 29 Mar 2019 19:14:10 +0000 (14:14 -0500)]
drm/amdgpu/smu11: fix warning on 32bit arches
Fixes
warning: cast from pointer to integer of different size
[-Wpointer-to-int-cast]
on 32 bit platforms.
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Liviu Dudau [Tue, 26 Mar 2019 10:23:40 +0000 (10:23 +0000)]
MAINTAINERS: Fix pattern for Documentation path for Arm Mali Komeda
The Device Tree bindings documentation file is in a simplified path
that doesn't match the MAINTAINERS entry.
Reported-by: Joe Perches <joe@perches.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Liviu Dudau [Mon, 25 Mar 2019 16:31:44 +0000 (16:31 +0000)]
arm/komeda: Compile komeda_debugfs_init() only if CONFIG_DEBUG_FS is enabled
We don't call this function if CONFIG_DEBUG_FS is not defined, but we
should not be compiling it either, as the declaration of the debugfs
core functions is not included.
Reported by the kbuild test robot.
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Tue, 22 Jan 2019 09:24:34 +0000 (09:24 +0000)]
drm/komeda: Add debugfs node "register" for register dump
Add a debugfs node "register" and entry function dump_register to
dev/pipeline/component to register dump, then user can read
"/sys/kernel/debug/komeda/register" to get the register values via these
chip function.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
[Added the d71_layer_dump() function that was in a previous commit]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Tue, 22 Jan 2019 09:24:25 +0000 (09:24 +0000)]
drm/komeda: Add irq handling
1. Added irq_handler/irq_enable/irq_disable to komeda_dev_func, then the
Komeda-CORE can control the HW irq via these chip function.
2. Install irq and register irq_handler to system by DRM, so once the IRQ
coming, the handling sequence is:
komeda_kms_irq_handler(int irq, void *data)
/* step 1. call into the CHIP to recognize event */
mdev->funcs->irq_handler(mdev, &evts);
/* step 2. notify the crtc to handle the events */
for (i = 0; i < kms->n_crtcs; i++)
komeda_crtc_handle_event(&kms->crtcs[i], &evts);
v2:
- Move get IRQ number into this change.
- Enable irq before drm_dev_register.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Tue, 22 Jan 2019 09:24:16 +0000 (09:24 +0000)]
drm/komeda: Add komeda_assemble_pipelines
komeda_accemble_pipelines is for:
1. Verifing the component->supported_inputs according to the
pipeline->avail_components.
2. Generating component->supported_outputs.
v2: Lower the debug message of komeda_component_dump to DRM_DEBUG.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Tue, 22 Jan 2019 09:24:07 +0000 (09:24 +0000)]
drm/komeda: Add D71 improc and timing_ctrlr
Add and initialize improc and timing_ctrlr according to D71 capablitites
v2: Rebase.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Tue, 22 Jan 2019 09:23:58 +0000 (09:23 +0000)]
drm/komeda: Add d71 compiz component
Implement d71_compiz_init and add compiz component to komeda-CORE
v2: Rebase.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Tue, 22 Jan 2019 09:23:49 +0000 (09:23 +0000)]
drm/komeda: Add d71 layer
1. Add detailed layer/layer_state definitions
2. Add d71_layer_init to report layer features and capabilities according
to D71 layer block.
3. Add d71_layer_updat/disable
v2: Rebase.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
[removed d71_layer_dump() from this commit]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Dave Airlie [Fri, 29 Mar 2019 04:01:55 +0000 (14:01 +1000)]
Merge tag 'drm-misc-next-2019-03-28-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.2:
UAPI Changes:
- Remove unused DRM_DISPLAY_INFO_LEN (Ville)
Cross-subsystem Changes:
- None
Core Changes:
- Fix compilation when CONFIG_FBDEV not selected (Daniel)
- fbdev: Make skip_vt_switch default (Daniel)
- Merge fb_helper_fill_fix, fb_helper_fill_var into fb_helper_fill_info (Daniel)
- Remove unused fields in connector, display_info, and edid_quirks (Ville)
Driver Changes:
- virtio: package function args in virtio_gpu_object_params (Gerd)
- vkms: Fix potential NULL-dereference bug (Kangjie)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190328183045.GA44823@art_vandelay
Dave Airlie [Fri, 29 Mar 2019 01:30:04 +0000 (11:30 +1000)]
Merge tag 'du-next-
20190328' of git://linuxtv.org/pinchartl/media into drm-next
R-Car DU miscellaneous changes for v5.2
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190328042035.GA4846@pendragon.ideasonboard.com
Dave Airlie [Fri, 29 Mar 2019 01:01:04 +0000 (11:01 +1000)]
Merge tag 'drm-intel-next-2019-03-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Make mmap code more asynchronous. Avoid full SET_DOMAIN on GTT mmap pagefault,
and flushes pages on acquisition instead. Moves some of the work from mmap fault
time to execbuf time to avoid lock contention during mmap access.
Has neutral to positive impact on perf as the flushing moves to execbuf time
in real world workloads on the current known userspaces due to recycling of BOs.
If there exist an unknown non-recycling userspace, they should explicitly do the
SET_DOMAIN and not rely on kernel doing implicit SET_DOMAIN because swapout/in
might have happenedt.
- Restore the accidentally removed behaviour of returning object size on GEM_CREATE
From 2011:
ff72145badb8 ("drm: dumb scanout create/mmap for intel/radeon (v3)")
- Includes a some neutered patches to prepare to complete the earlier Mesa
recovery feature uAPI. Looking to enable this in the next PR.
Driver Changes:
- Add Elkhartlake (Gen11) support code and PCI IDs
- Add missing Amberlake PCI ID 0x87CA (Ville)
- Fix to Bugzilla #109780: Pick the first mode from EDID as the fixed mode when there is no preferred mode (Ville)
- Fix GCC 4.8 build by using __is_constexpr() (Chris, Randy, Uma)
- Add "Broadcast RGB", "force_audio" and "max_bpc" properties to DP MST (Ville)
- Remove 8bpc limitation from DP MST (Ville)
- Fix changing between limited and full range RGB output in DP fastsets (Ville)
- Reject unsupported HDR formats (Maarten)
- Handle YUV subpixel support better (Maarten)
- Various plane watermarks fixes and cleaning of the code (Ville)
- Icelake port sync master select fix (Manasi)
- Icelake VEBOX disable bitmask fix (Jose)
- Close a race where userspace could see incompletely initialized GEM context (Chris)
- Avoid C3 on i945gm to keep vblank interrupts steady (Ville)
- Avoid recalculating PLL HW readout each time (Lucas)
- A ton of patches to modularize uncore code (Daniel)
- Instead of storing media fuse value, immediately derive engine masks (Daniele)
- Reduce struct_mutex usage (Chris)
- Iterate over child devices to initialize ddi_port_info (Jani)
- Fixes to return correct error values when bailing out of functions (Dan)
- Use bitmap_zalloc() (Andy)
- Reorder and clarify Gen3/4 code (Ville)
- Refactor out common code in display mode handling (Ville)
- GuC code fixes (Sujaritha, Michal)
- Selftest improvements (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190328151515.GA9606@jlahtine-desk.ger.corp.intel.com
Alex Deucher [Thu, 28 Mar 2019 15:16:12 +0000 (10:16 -0500)]
Revert "drm/amdgpu: use HMM callback to replace mmu notifier"
This reverts commit
57731a07795ae80790c6ae7d8e7001cdbd6d14c0.
This depends on an HMM fix which is not upstream yet.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 28 Mar 2019 15:15:49 +0000 (10:15 -0500)]
Revert "drm/amdkfd: avoid HMM change cause circular lock"
This reverts commit
8dd69e69f42397c9b17764a951c44480b340858e.
This depends on an HMM fix which is not upstream yet.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 28 Mar 2019 15:15:26 +0000 (10:15 -0500)]
Revert "drm/amdgpu: replace get_user_pages with HMM mirror helpers"
This reverts commit
915d3eecfa23693bac9e54cdacf84fb4efdcc5c4.
This depends on an HMM fix which is not upstream yet.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 28 Mar 2019 15:15:03 +0000 (10:15 -0500)]
Revert "drm/amdgpu: fix HMM config dependency issue"
This reverts commit
6b8f7e3dee7883084932bbdfce471a2960c6db5d.
This depends on an HMM fix which is not upstream yet.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 28 Mar 2019 15:14:33 +0000 (10:14 -0500)]
Revert "drm/amdkfd: support concurrent userptr update for HMM"
This reverts commit
386a68e78620c793ed1ba9bc5789b90c18be262a.
This depends on an HMM fix which is not upstream yet.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 28 Mar 2019 15:14:03 +0000 (10:14 -0500)]
Revert "drm/amdgpu: support userptr cross VMAs case with HMM"
This reverts commit
5aeaccca30023c00d982dfa7bfd25b384523460a.
This depends on an HMM fix which is not upstream yet.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 28 Mar 2019 15:12:39 +0000 (10:12 -0500)]
Revert "drm/amdgpu: more descriptive message if HMM not enabled"
This reverts commit
194f87ddffe26bbbd124c549a9bf12a96a7f2919.
This depends on an HMM fix which is not upstream yet.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joonas Lahtinen [Thu, 28 Mar 2019 12:41:55 +0000 (14:41 +0200)]
drm/i915: Update DRIVER_DATE to
20190328
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Joonas Lahtinen [Thu, 28 Mar 2019 11:53:18 +0000 (13:53 +0200)]
drm/i915: Update DRIVER_DATE to
20190328
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Joonas Lahtinen [Thu, 28 Mar 2019 11:15:45 +0000 (13:15 +0200)]
drm/i915: Update DRIVER_DATE to
20190328
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Gerd Hoffmann [Mon, 18 Mar 2019 11:33:32 +0000 (12:33 +0100)]
drm/virtio: rework resource creation workflow.
This patch moves the virtio_gpu_cmd_create_resource() call (which
notifies the host about the new resource created) into the
virtio_gpu_object_create() function. That way we can call
virtio_gpu_cmd_create_resource() before ttm_bo_init(), so the host
already knows about the object when ttm initializes the object and calls
our driver callbacks.
Specifically the object is already created when the
virtio_gpu_ttm_tt_bind() callback invokes virtio_gpu_object_attach(),
so the extra virtio_gpu_object_attach() calls done after
virtio_gpu_object_create() are not needed any more.
The fence support for the create ioctl becomes a bit more tricky though.
The code moved into virtio_gpu_object_create() too. We first submit the
(fenced) virtio_gpu_cmd_create_resource() command, then initialize the
ttm object, and finally attach just created object to the fence for the
command in case it didn't finish yet.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190318113332.10900-6-kraxel@redhat.com
Gerd Hoffmann [Mon, 18 Mar 2019 11:33:31 +0000 (12:33 +0100)]
drm/virtio: params struct for virtio_gpu_cmd_create_resource_3d()
Add 3d resource parameters to virtio_gpu_object_params struct. With
that in place we can use it for virtio_gpu_cmd_resource_create_3d()
calls.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190318113332.10900-5-kraxel@redhat.com
Gerd Hoffmann [Mon, 18 Mar 2019 11:33:30 +0000 (12:33 +0100)]
drm/virtio: params struct for virtio_gpu_cmd_create_resource()
Add format, width and height fields to the virtio_gpu_object_params
struct. With that in place we can use the parameter struct for
virtio_gpu_cmd_create_resource() calls too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190318113332.10900-4-kraxel@redhat.com
Gerd Hoffmann [Mon, 18 Mar 2019 11:33:29 +0000 (12:33 +0100)]
drm/virtio: use struct to pass params to virtio_gpu_object_create()
Create virtio_gpu_object_params, use that to pass object parameters to
virtio_gpu_object_create. This is just the first step, followup patches
will add more parameters to the struct. The plan is to use the struct
for all object parameters.
Drop unused "kernel" parameter for virtio_gpu_alloc_object(), it is
unused and always false.
Also drop "pinned" parameter. virtio-gpu doesn't shuffle around
objects, so effecively they all are pinned anyway. Hardcode
TTM_PL_FLAG_NO_EVICT so ttm knows. Doesn't change much for the moment
as virtio-gpu supports TTM_PL_FLAG_TT only so there is no opportunity to
move around objects. That'll probably change in the future though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190318113332.10900-3-kraxel@redhat.com
Gerd Hoffmann [Mon, 18 Mar 2019 11:33:28 +0000 (12:33 +0100)]
drm/virtio: move virtio_gpu_object_{attach, detach} calls.
Drop the dummy ttm backend implementation, add a real one for
TTM_PL_FLAG_TT objects. The bin/unbind callbacks will call
virtio_gpu_object_{attach,detach}, to update the object state
on the host side, instead of invoking those calls from the
move_notify() callback.
With that in place the move and move_notify callbacks are not
needed any more, so drop them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190318113332.10900-2-kraxel@redhat.com
Gerd Hoffmann [Wed, 20 Mar 2019 08:36:12 +0000 (09:36 +0100)]
drm/virtio: add virtio-gpu-features debugfs file.
This file prints which features the virtio-gpu device has.
Also add "virtio-gpu-" prefix to the existing fence file,
to make clear this is a driver-specific debugfs file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190320083612.32067-1-kraxel@redhat.com
YueHaibing [Mon, 25 Mar 2019 09:26:31 +0000 (09:26 +0000)]
drm/virtio: remove set but not used variable 'vgdev'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/virtio/virtgpu_ttm.c: In function 'virtio_gpu_init_mem_type':
drivers/gpu/drm/virtio/virtgpu_ttm.c:117:28: warning:
variable 'vgdev' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/virtio/virtgpu_ttm.c: In function 'virtio_gpu_bo_swap_notify':
drivers/gpu/drm/virtio/virtgpu_ttm.c:300:28: warning:
variable 'vgdev' set but not used [-Wunused-but-set-variable]
It is never used since introduction in
dc5698e80cf7 ("Add virtio gpu driver.")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190325092631.152060-1-yuehaibing@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Laurent Pinchart [Wed, 6 Mar 2019 20:48:35 +0000 (22:48 +0200)]
drm: rcar-du: lvds: Set LVEN and LVRES bits together on D3
On the D3 SoC the LVDS PHY must be enabled in the same register write
that enables the LVDS output. Skip writing the LVEN bit independently
on that platform, it will be set by the write that sets LVRES.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Laurent Pinchart [Sun, 3 Mar 2019 20:29:21 +0000 (22:29 +0200)]
drm: rcar-du: lvds: Adjust operating frequency for D3 and E3
The D3 and E3 SoCs have different pixel clock frequency limits for the
LVDS encoder than the other SoCs in the Gen3 family. Adjust the mode
fixup implementation accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Kieran Bingham [Fri, 15 Mar 2019 17:01:05 +0000 (17:01 +0000)]
drm: rcar-du: Link CRTCs to the DU device
The rcar_du_crtc functions have a heavy reliance on the rcar_du_group
structure, in many cases just to access the DU device context.
To better separate the groups out of the CRTC handling code, give the
rcar_du_crtc its own pointer to the device and remove the indirection
through the group pointers.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Tue, 12 Mar 2019 16:18:17 +0000 (18:18 +0200)]
drm: rcar-du: lvds: Fix post-DLL divider calculation
The PLL parameters are computed by looping over the range of acceptable
M, N and E values, and selecting the combination that produces the
output frequency closest to the target. The internal frequency
constraints are taken into account by restricting the tested values for
the PLL parameters, reducing the search space. The target frequency,
however, is only taken into account when computing the post-PLL divider,
which can result in a 0 value for the divider when the PLL output
frequency being tested is lower than half of the target frequency.
Subsequent loops will produce a better set of PLL parameters, but for
some of the iterations this can result in a division by 0.
Fix it by clamping the divider value. We could instead restrict the E
values being tested in the inner loop, but that would require additional
calculation that would likely be less efficient as the E parameter can
only take three different values.
Fixes: c25c01361199 ("drm: rcar-du: lvds: D3/E3 support")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2019 10:29:05 +0000 (12:29 +0200)]
drm: Forward-declare struct drm_format_info in drm_framebuffer.h
drm_framebuffer.h makes use of a pointer to struct drm_format_info but
doesn't include drm_fourcc.h (neither directly nor indirectly).
Forward-declare the structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Kieran Bingham [Thu, 14 Mar 2019 22:04:20 +0000 (22:04 +0000)]
drm: rcar-du: Remove unused prototypes
The CRTC suspend and resume functions have been replaced, but the
prototypes were not removed.
Remove the redundant definitions.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Kieran Bingham [Thu, 14 Mar 2019 22:04:19 +0000 (22:04 +0000)]
drm: rcar-du: crtc: Make local functions static
The rcar_du_crtc_mode_valid() and rcar_du_crtc_get_crc_sources()
functions are accessed only through a function pointer table.
Convert the function definitions to be static to the module.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Kieran Bingham [Thu, 14 Mar 2019 22:04:18 +0000 (22:04 +0000)]
drm: Fix subtle spelling error in drm_crtc_state
The drm_crtc_state documentation contains a subtle misspelling of the
word subtle. Correct it.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Sat, 2 Mar 2019 16:13:04 +0000 (18:13 +0200)]
drm: rcar-du: Support panels connected directly to the DPAD outputs
The R-Car DU driver assumes that a bridge is always connected to the DU
output. This is valid for the LVDS and HDMI outputs, but the DPAD
outputs can be connected directly to a panel, in which case no bridge is
available.
To support this use case, detect whether the entities connected to the
DU DPAD outputs are encoders or panels based on the number of ports of
their DT node, and retrieve the corresponding type of DRM objects. For
panels, additionally create panel bridge instances.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kevin Key <kevin.key@gentex.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Evan Quan [Tue, 26 Mar 2019 09:16:36 +0000 (17:16 +0800)]
drm/amd/powerplay: update current profile mode only when it's really applied
No need to update current profile mode if the new profile mode
does not take effect in fact.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dmytro Laktyushkin [Fri, 15 Mar 2019 17:59:25 +0000 (13:59 -0400)]
drm/amd/display: fix odm output gamma programming
Currently only top pipe gets output tf programmed. This change
makes all odm head pipes get output tf programmed.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joshua Aberback [Mon, 18 Mar 2019 17:40:47 +0000 (13:40 -0400)]
drm/amd/display: Populate macro_tile_size field for dml
Create a functions to return swizzle types for dml
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Thu, 28 Feb 2019 19:45:13 +0000 (14:45 -0500)]
drm/amd/display: use dc_is_virtual instead of ENUM
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Sat, 16 Mar 2019 20:06:58 +0000 (16:06 -0400)]
drm/amd/display: 3.2.24
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nikola Cornij [Wed, 13 Mar 2019 00:11:37 +0000 (20:11 -0400)]
drm/amd/display: Pass SDP spliting in parameters
pass SDP splitting when setting stream attributes for future use
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eryk Brol [Wed, 13 Mar 2019 15:51:15 +0000 (11:51 -0400)]
drm/amd/display: Create clock funcs
Create dccg_init and init_clocks for future use
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fatemeh Darbehani [Tue, 12 Mar 2019 17:57:36 +0000 (13:57 -0400)]
drm/amd/display: Clean up old pplib interface functions
[Why]
set_display_requirement, dcn1_pplib_apply_display_requirements
are no longer used and should be removed.
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Wed, 13 Feb 2019 21:20:27 +0000 (16:20 -0500)]
drm/amd/display: Pass init_data into DCN resource creation
[WHY]
The resource constructor currently needs num_virtual_links from
init_data but will need access to other items provided by DM.
[HOW]
Pass init_data into DCN create_resource_pool functions.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hugo Hu [Mon, 25 Feb 2019 11:16:52 +0000 (19:16 +0800)]
drm/amd/display: Handle branch device with DFP count = 0 case.
[Why]
When you have a SST branch device the driver, Even no sink device connected,
it also send HPD with a valid EDID. Driver will config it to DP sink.
Therefore, there're two displays in display setting.
DPCD 0x05, DFP_PRESENT = 1 (branch device),
DFP_TYPE = 00 (Display Port)
[How]
Driver determine DPCD 0x05 DFP_PRESENT = 1(branch) as an active dongle
And check DFP count.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Hugo Hu <Hugo.Hu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hersen wu [Fri, 1 Mar 2019 16:54:02 +0000 (11:54 -0500)]
drm/amd/display: program default output gamma
program default output gamma if no user specific gamma
parameters passed.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Tue, 12 Mar 2019 19:12:41 +0000 (15:12 -0400)]
drm/amd/display: add preferred pipe split logic
[why]
existing logic finds "first free pipe from 5 -> 0" to split
this will cause certain sequences to require DC to move
an MPCC from one tree to another, which is unsupported
this leads to blackscreen
to mitigate this problem, we will always try to acquire the
"preferred" pipe, and each pipe has a unique preferred pipe
this means we avoid most of the scenarios where
pipe splitting leads to moving MPCC from one tree
to another
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 27 Mar 2019 10:34:24 +0000 (11:34 +0100)]
drm/amdgpu: don't put the root PD into the relocated list
Instead of skipping the root PD while processing the relocated list just never
put it on the list in the first place.
This avoids walking the list all together when the root PD is the only entry
and so also avoids trying to submit a zero sized IB to the SDMA.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 21 Mar 2019 15:43:39 +0000 (16:43 +0100)]
drm/amdgpu: drop the ib from the VM update parameters
It is redundant with the job pointer.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 21 Mar 2019 15:34:18 +0000 (16:34 +0100)]
drm/amdgpu: move VM table mapping into the backend as well
Clean that up further and also fix another case where the BO
wasn't kmapped for CPU based updates.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
shaoyunl [Wed, 20 Mar 2019 20:14:56 +0000 (16:14 -0400)]
drm/amdgpu: XGMI pstate switch initial support
Driver vote low to high pstate switch whenever there is an outstanding
XGMI mapping request. Driver vote high to low pstate when all the
outstanding XGMI mapping is terminated.
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 18 Mar 2019 20:15:57 +0000 (21:15 +0100)]
drm/amdgpu: use the new VM backend for clears
And remove the existing code when it is unused.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 15 Mar 2019 08:25:15 +0000 (16:25 +0800)]
drm/amdgpu: defer cmd/fence/fw buffers destroy on hw_init failure
As the cleanup jobs performed in pre_fini may still need these
buffers. NULL pointer dereference will be triggered without them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 15 Mar 2019 02:26:49 +0000 (10:26 +0800)]
drm/amdgpu: add more debug friendly prompts
Large piece of codes share one error prompt. That
is not friendly for debugging.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 15 Mar 2019 02:02:59 +0000 (10:02 +0800)]
drm/amdgpu: error out on mode1 reset failure
The error return value should be correctly reflected.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 15 Mar 2019 02:04:34 +0000 (10:04 +0800)]
drm/amdgpu: trivial typo fix
"error" was not correctly spelled.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xinhui pan [Thu, 21 Mar 2019 07:00:47 +0000 (15:00 +0800)]
drm/amdgpu: remove per obj debugfs write
there is ras_control node which can do its job.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xinhui pan [Thu, 21 Mar 2019 07:13:38 +0000 (15:13 +0800)]
drm/amdgpu: Fix amdgpu ras to ta enums conversion
Add helpes to transalte the two enums. And it will catch bugs
easily.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xinhui pan [Thu, 21 Mar 2019 04:47:07 +0000 (12:47 +0800)]
drm/amdgpu: use macro instead of enum for flags
better to use macro.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xinhui pan [Tue, 19 Mar 2019 03:16:32 +0000 (11:16 +0800)]
drm/amdgpu: Fix some sanity check
ras context might be NULL, so move con->h_data after check !con
also fix sizeof wrong type while at it.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Vetter [Wed, 27 Mar 2019 12:58:19 +0000 (13:58 +0100)]
drm/fb-helper: Fixup fill_info cleanup
I forgot the !CONFIG_FBDEV case. Also some kerneldoc needed more
adjusting.
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327125819.16478-1-daniel.vetter@ffwll.ch
Maarten Lankhorst [Fri, 22 Mar 2019 13:59:54 +0000 (14:59 +0100)]
drm/i915: Reject rotation for some hdr formats
90/270 rotation is not supported for Y21x and the 12/16 bits XVYU formats,
reject support for them.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322135954.20434-3-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Maarten Lankhorst [Fri, 22 Mar 2019 13:59:53 +0000 (14:59 +0100)]
drm/i915: Reject Yf tiling for HDR formats, v2.
This was missing in the original addition of those formats, but in
PLANE_SIZE description it's mentioned that 8 cpp formats are not
valid with Yf tiling. Reject this case properly.
Also reject Y21x Yf tiling support this is also not supported.
Changes since v1:
- Reject Y21x as well.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322135954.20434-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Maarten Lankhorst [Fri, 22 Mar 2019 13:59:52 +0000 (14:59 +0100)]
drm/i915: Handle YUV subpixel support better
Y41x formats is a 4:4:4 format, so it can be addressed with pixel level accuracy.
Meanwhile it seems that while rotating YUYV 4:2:2 formats need a multiple of 2
for width and height, otherwise corruption occurs.
For YUV 4:2:2, the spec says that w/h should always be even, but we get
away with odd height while unrotated. When rotating it seems corruption
occurs with an odd x/y, and w/h should always be even.
Just to be completely paranoid, reject odd x/y w/h when rotating 90/270.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322135954.20434-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Joonas Lahtinen [Wed, 27 Mar 2019 16:23:53 +0000 (18:23 +0200)]
Merge drm/drm-next into drm-intel-next-queued
This is needed to get the fourcc code merged without conflicts.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 27 Mar 2019 10:58:14 +0000 (10:58 +0000)]
drm/i915: Drop new chunks of context creation ABI (for now)
The intent was to expose these as part of the means to perform full
context recovery (though not the SINGLE_TIMELINE, that is for later and
just sucked as collateral damage). As that requires a couple more
patches to complete the series, roll back the earlier chunks of ABI for
an intervening PR. We keep all the internals intact and under selftests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327105814.14694-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Zhenyu Wang [Wed, 27 Mar 2019 09:06:36 +0000 (17:06 +0800)]
drm/i915: Disable semaphore on vGPU for now
This is to disable semaphore usage when on vGPU for now. Unfortunately
GVT-g hasn't fully enabled semaphore usage yet, so current guest with
semaphore use would cause vGPU failure.
Although current semaphore failure with vGPU can be simply resolved by
allowing cmd parser to accept MI_SEMAPHORE_WAIT command with address
audit, we're checking general usage of semaphore and how we should
handle it properly for virtualization in consider of function and
security concern. So we decide to request to disable it for now in
guest driver. Once GVT could support it, we would add new compat bit
to turn it on.
Fixes: e88619646971 ("drm/i915: Use HW semaphores for inter-engine synchronisation on gen8+") #vgpu
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327090636.3547-1-zhenyuw@linux.intel.com
Ville Syrjälä [Tue, 26 Mar 2019 14:25:55 +0000 (16:25 +0200)]
drm/i915: Update TRANS_MSA_MISC for fastsets
Update the DP MSA MISC bits for fastsets. This is needed
when we change between limited and full range RGB output.
On HSW+ changing limited_range does not currently result in a
full modeset since we have don't have the readout code for it
(for DP we could, and probably should, readout from TRANS_MSA_MISC
itself, for HDMI we would have to rely on the infoframe). So
the PIPE_CONF_CHECK() is only performed for pre-HSW platforms.
That means any change in the value will result in a fastset
instead. Fortunately there is no prohibition to changing
TRANS_MSA_MISC dynamically, so it looks like we can legally do
fastsets for this.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-5-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 26 Mar 2019 14:25:54 +0000 (16:25 +0200)]
drm/i915: Add max_bpc property for DP MST
Allow the user to limit the output bpc with DP MST.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-4-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 26 Mar 2019 14:25:53 +0000 (16:25 +0200)]
drm/i915: Remove the 8bpc shackles from DP MST
Allow DP MST to output any color depth. This means deep color as
well as falling back to 6bpc if we would otherwise require too
much bandwidth.
TODO: We should probably extend bw_contstrained scheme to force
all streams on the link to 6bpc if we can't fit the new stream(s)
otherwise.
v2: Use a proper for-loop (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-3-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 27 Mar 2019 13:19:29 +0000 (15:19 +0200)]
drm/i915: Expose the force_audio property with DP MST
We already expose the force_audio property with SST. Do the same
with MST.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-2-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 26 Mar 2019 14:25:51 +0000 (16:25 +0200)]
drm/i915: Add broadcast RGB property for DP MST
Add the "Broadcast RGB" property to MST connectors, and implement
the same logic for it as we have in the SST code.
v2: Extract and reuse intel_dp_limited_color_range()
Cc: Ivan Vlk <ari@adyline.sk>
Tested-by: Ivan Vlk <ari@adyline.sk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108821
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-1-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 22 Mar 2019 17:42:44 +0000 (19:42 +0200)]
drm/edid: Remove defunct EDID_QUIRK_FIRST_DETAILED_PREFERRED
Looks like EDID_QUIRK_FIRST_DETAILED_PREFERRED never did anything.
Its counterpart in f86EdidModes.c is properly hooked up but somehow
that functionality was lost when it was copied into the kernel.
The concensus seems to be that this quirk is a bit misguided
anyway so let's nuke the leftovers.
For posterity here are some links to known cases:
* Proview AY765C
https://bugs.freedesktop.org/show_bug.cgi?id=15160
* Unknown Acer
https://bugzilla.redhat.com/show_bug.cgi?id=284231 (got the
reference from xf86EdidModes.c)
* Peacock Ergovision 19 (only in xf86EdidModes.c)
https://bugzilla.redhat.com/show_bug.cgi?id=492359
* Philips 107p5 CRT
"Reported on xorg@ with pastebin", didn't find the mail(s)
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322174244.23945-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Ville Syrjälä [Tue, 26 Mar 2019 17:34:01 +0000 (19:34 +0200)]
drm/uapi: Remove unused DRM_DISPLAY_INFO_LEN
Remove the unused DRM_DISPLAY_INFO_LEN from the uapi headers.
I presume the original plan was to expose the display name
via getconnector, but looks like that never happened. So we have
the define for the length of the string but no string anywhere.
A quick scan didn't seem to reveal userspace referencing this
so hopefully we can just nuke it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326173401.7329-4-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 26 Mar 2019 17:34:00 +0000 (19:34 +0200)]
drm: Kill drm_display_info.name
drm_display_info.name is only ever set by a few panel drivers but
never actually used anywhere except in i915 debugfs code. Trash it.
v2: Fix typo in commit msg (Sam Ravnborg)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326173401.7329-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 26 Mar 2019 17:33:59 +0000 (19:33 +0200)]
drm: Fix tabs vs. spaces
A set of 8 spaces has snuck in. Replace with a tab, and
toss in an extra newline while at it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326173401.7329-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 26 Mar 2019 17:33:58 +0000 (19:33 +0200)]
drm: Nuke unused drm_display_info.pixel_clock
drm_display_info.pixel_clock is unused. Let's get rid of it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326173401.7329-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
José Roberto de Souza [Tue, 26 Mar 2019 23:02:23 +0000 (16:02 -0700)]
drm/i915/icl: Fix VEBOX mismatch BUG_ON()
GT VEBOX DISABLE is only 4 bits wide but it was using a 8 bits wide
mask, the remaning reserved bits is set to 0 causing 4 more
nonexistent VEBOX engines being detected as enabled, triggering the
BUG_ON() because of mismatch between vebox_mask and newly added
VEBOX_MASK().
[ 64.081621] [drm:intel_device_info_init_mmio [i915]] vdbox enable: 0005, instances: 0005
[ 64.081763] [drm:intel_device_info_init_mmio [i915]] vebox enable: 00f1, instances: 0001
[ 64.081825] intel_device_info_init_mmio:925 GEM_BUG_ON(vebox_mask != ({ unsigned int first__ = (VECS0); unsigned int count__ = (2); ((&(dev_priv)->__info)->engine_mask & (((~0UL) - (1UL << (first__)) + 1) & (~0UL >> (64 - 1 - (first__ + count__ - 1))))) >> first__; }))
[ 64.082047] ------------[ cut here ]------------
[ 64.082054] kernel BUG at drivers/gpu/drm/i915/intel_device_info.c:925!
BSpec: 20680
Fixes: 9511cb6481af ("drm/i915: Adding missing '; ' to ENGINE_INSTANCES")
Fixes: 26376a7e74d2 ("drm/i915/icl: Check for fused-off VDBOX and VEBOX instances")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326230223.26336-1-jose.souza@intel.com
Daniel Vetter [Tue, 26 Mar 2019 13:20:08 +0000 (14:20 +0100)]
drm/fb-helper: Unexport fill_{var,info}
Not used by drivers anymore.
v2: Rebase
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-21-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 26 Mar 2019 13:20:06 +0000 (14:20 +0100)]
drm/udl: Use drm_fb_helper_fill_info
This should not result in any changes.
v2: Rebase
v3: Don't forget to remove the info->par assignment (Noralf)
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Emil Lundmark <lndmrk@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-19-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 26 Mar 2019 13:20:07 +0000 (14:20 +0100)]
drm/vboxvideo: Use drm_fb_helper_fill_info
This should not result in any changes.
v2: Rebase over vbox changes - vbox gained it's own line to fill
fix.id.
v3: Rebase
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-20-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 26 Mar 2019 13:20:05 +0000 (14:20 +0100)]
drm/tegra: Use drm_fb_helper_fill_info
Another driver that didn't set fbinfo->fix.id before.
v2: Fix subject and rebase
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-18-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 26 Mar 2019 13:20:04 +0000 (14:20 +0100)]
drm/rockchip: Use drm_fb_helper_fill_info
This will set an fb name for the first time!
v2: Rebase
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-17-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 26 Mar 2019 13:20:03 +0000 (14:20 +0100)]
drm/radeon: Use drm_fb_helper_fill_info
This should not result in any changes.
v2: Rebase
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-16-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 26 Mar 2019 13:20:02 +0000 (14:20 +0100)]
drm/omap: Use drm_fb_helper_fill_info
This changes the fb name from "omapdrm" to "omapdrmfb".
v2: Rebase
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-15-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 26 Mar 2019 13:20:01 +0000 (14:20 +0100)]
drm/nouveau: Use drm_fb_helper_fill_info
This changes the fb name from "nouveaufb" to "nouveaudrmfb".
Aside: I wonder whether the in_interrupt() check is good enough for
the nouveau acceleration. Cargo-cult says drm_can_sleep() is needed,
which isn't actually working if you pick a .config without PREEMPT.
For the generic fbdev defio support we've gone with offloading
everything to a worker. For the non-accel callbacks (set_par, blank
and friends) checking for oops_in_progress is good enough to catch all
the evil calling contexts.
v2: Rebase
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-14-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 26 Mar 2019 13:20:00 +0000 (14:20 +0100)]
drm/msm: Use drm_fb_helper_fill_info
This will change the fb name from "msm" to "msmdrmfb".
v2: Rebase
v3: Fix subject prefix (Noralf)
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-13-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 26 Mar 2019 13:19:59 +0000 (14:19 +0100)]
drm/mga200g: Use drm_fb_helper_fill_info
Only changes the name of the fb from "mgadrmfb" to "mga200drmfb".
v2: Rebase
v3: Note the name change (Noralf)
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-12-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 26 Mar 2019 13:19:58 +0000 (14:19 +0100)]
drm/i915: Use drm_fb_helper_fill_info
This changes the fb name from "inteldrmfb" to "i915drmfb".
v2: Rebase
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-11-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 26 Mar 2019 13:19:57 +0000 (14:19 +0100)]
drm/hibmc: Use drm_fb_helper_fill_info
Should not result in any changes.
v2: Rebase
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Ajit Negi <ajitn.linux@gmail.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: John Garry <john.garry@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-10-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 26 Mar 2019 13:19:56 +0000 (14:19 +0100)]
drm/gma500: Use drm_fb_helper_fill_info
This will change the fb name from "psbdrmfb" to "gma500drmfb".
v2: Rebase
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-9-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 26 Mar 2019 13:19:55 +0000 (14:19 +0100)]
drm/exynos: Use drm_fb_helper_fill_info
This will give the exynos fbdev a name!
v2: Rebase
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-8-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 26 Mar 2019 13:19:54 +0000 (14:19 +0100)]
drm/cirrus: Use drm_fb_helper_fill_info
Should not result in any changes.
v2: Rebase
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-7-daniel.vetter@ffwll.ch
projects / openwrt / staging / blogic.git / log