Staging: rtl8192su/ieee80211: remove superfluous container_of definition

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su/ieee80211: remove OPENSUSE_SLED ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove JOHN_DUMP[_TXDESC] ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: make private ieee80211 stack really private

* rename ieee80211_{init,exit}() to ieee80211_debug_{init,exit}()
* make private ieee80211 stack really private
* cleanup Makefile
* remove superfluous ieee80211_* defines
* remove superfluous EXPORT_SYMBOLs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove more unused files

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se/ieee80211: convert MMIE_TYPE_* defines to enums

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se/ieee80211: ieee80211.h reorderings

Reorder the code in ieee80211.h for easier comparisions with
rtl8192su's version of the file.

While at it:
* use IEEE80211_4ADDR_LEN for IEEE80211_LEN definition
* remove unused country_code_type_t typedef
* make some minor coding style fixes

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se/ieee80211: switch to use <linux/ieee80211.h>

While at it:
* remove some commented out code
* remove some unused definitions

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: rename struct ieee80211_hdr_QOS to struct ieee80211_hdr_4addrqos

Rename struct ieee80211_hdr_QOS to struct ieee80211_hdr_4addrqos
and QOS_ctl field to qos_ctl (to match the naming used by rtl8192su).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: rename struct ieee80211_hdr_3addr_qos to struct ieee80211_hdr_3addrqos

Rename struct ieee80211_hdr_3addr_QOS to struct ieee80211_hdr_3addrqos
and QOS_ctl field to qos_ctl (to match the naming used by rtl8192su).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: rename struct ieee80211_hdr to struct ieee80211_hdr_4addr

ieee80211_hdr name is too generic so use ieee80211_hdr_4addr one instead
(which matches the naming used by rtl8192su driver).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: remove ENABLE_IPS ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se/ieee80211: remove NOT_YET ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se/ieee80211: remove FEDORACORE_9 ifdef

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se/ieee80211: remove OPENSUSE_SLED ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: b3dfg: Drop NULL test on list_entry result

list_entry, which is an alias for container_of, cannot return NULL, as
there is no way to add a NULL value to a doubly linked list.

A simplified version of the semantic match that findds this problem is as
follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r@
expression x,E;
statement S1,S2;
position p,p1;
@@

*x = list_entry@p(...)
... when != x = E
*if@p1 (x == NULL) S1 else S2
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove unused Makefile.{arm,x86} files

Cc: Forest Bond <forest@alittletooquiet.net>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove PRIVATE_OBJ ifdefs

Cc: Forest Bond <forest@alittletooquiet.net>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt*: don't confuse user of rt3070 driver with rt2870 strings

Original author didn't bother to change strings for rt3070 driver. Fix it.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt*: fix wait_queue_head_t declaration on stack

othwerwise lockdep complains:
"INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator."

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: add support for Linksys WUSB54GC-EU v3

According to FCC (*1) and *2 there's really RT2070L inside, but according
to *2 RT3070 and RT2070 are compatible.

*1 https://fjallfoss.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=327783&fcc_id=%27Q87-WUSB54GCV3%27
(look for "Internal Photos")
*2 http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=5&t=5245

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove dead code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove unused files

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove RTL8192SU ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove RTL8192SE ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove RTL8192SU_DISABLE_IQK ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove RTL8192S_PREPARE_FOR_NORMAL_RELEASE ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove RTL8190_Download_Firmware_From_Header ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove RTL8192SU_USB_PHY_TEST ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove RTL8192SU_ASIC_VERIFICATION ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove RTL8192SU_FPGA_2MAC_VERIFICATION ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove RTL8192SU_FPGA_UNSPECIFIED_NETWORK ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove RTL8192SU_USE_PARAM_TXPWR ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove DISABLE_BB_RF ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove RTL8192S_DISABLE_FW_DM ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove RTL8192SU_DISABLE_CCK_RATE ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove USB_TX_DRIVER_AGGREGATION_ENABLE ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove USB_RX_AGGREGATION_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove EEPROM_OLD_FORMAT_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove USE_ONE_PIPE ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove THOMAS_TURBO ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove CONFIG_RTL8192_PM ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove ENABLE_DOT11D ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: Remove Makefile refs to EXPORT_SYMTAB

Given that EXPORT_SYMTAB was removed long ago, remove the Makefile
references to it.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: remove dependency on WIRELESS_EXT version

As the driver is in mainline now we can remove such dependency.
WIRELESS_EXT is 22 now and it is always defined.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: at76_usb: replace mac2str() with %pM

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: at76_usb: fix !CONFIG_WIRELESS_EXT build

Fix this build error when CONFIG_WIRELESS_EXT is not set
at76_usb.c:5322: error: 'struct net_device' has no member named 'wireless_data'
at76_usb.c:5325: error: 'struct net_device' has no member named 'wireless_handlers'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt665x: depend on WIRELESS_EXT

Make vt665x depended on WIRELESS_EXT and remove remain ifdef's

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: remove dependency on WIRELESS_EXT version

As the driver is in mainline now we can remove such dependency.
WIRELESS_EXT is 22 now and it is always defined.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: remove dependency on kernel version

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: quatech_usb2: Improvements to set_termios method

This patch implements several improvements to the set_termios method
suggested by Alan Cox:
* Correct check for whether any changes are being requested.
* Inform callers that mark/space parity isn't supported by always
clearing the bit.
* Pass back the actual used baud rate in case it doesn't match what was
requested.

Remaining known issues are that IXANY flow control is not supported, but
we don't tell the caller that, and input and output XON/XOFF flow
control are either both on or both off, but we don't indicate that back
to the caller either.

Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: quatech_usb2: Improve debug output and fix write_room

This patch contains changes made in the course of successfully reading
data from the device. These consist of a number of corrections and
additions to debug messages, and a fix for incorrect calculation of the
number of characters in the device FIFO which affected the operation of
the write_room method.
The use of semaphores to control access to port settings is replaced by
the preferred use of mutexes as this is the only code that uses them.

Aug 18 17:09:32 [kernel] BUG: unable to handle kernel paging request at f82f122c
Aug 18 17:09:32 [kernel] IP: [<c11e1a63>] tty_port_close_start+0x8c/0x15e
Aug 18 17:09:32 [kernel] *pde = 00000000
Aug 18 17:09:32 [kernel] Modules linked in: snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss nls_iso8859_1 cifs xt_limit xt_NFLOG nfnetlink_log nfnetlink xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables i915 fb drm i2c_algo_bit cfbcopyarea i2c_core video backlight output cfbimgblt cfbfillrect quatech_usb2(C) usbserial uhci_hcd ehci_hcd snd_intel8x0 snd_ac97_codec ac97_bus usbcore tg3 snd_pcm snd_timer libphy snd intel_agp psmouse evdev ohci1394 soundcore ide_cd_mod cdrom ieee1394 snd_page_alloc agpgart floppy
Aug 18 17:09:32 [kernel] Pid: 4192, comm: cat Tainted: G         C (2.6.31-rc6-gkh #9) HP Compaq dc5100 MT(PW097ET)
Aug 18 17:09:32 [kernel] EIP: 0060:[<c11e1a63>] EFLAGS: 00010046 CPU: 0
Aug 18 17:09:32 [kernel] EIP is at tty_port_close_start+0x8c/0x15e
Aug 18 17:09:32 [kernel] EAX: 00000000 EBX: 00000246 ECX: ebacc380 EDX: 00000000
Aug 18 17:09:32 [kernel] ESI: f72f1204 EDI: e6073000 EBP: e60b3ce4 ESP: e60b3ccc
Aug 18 17:09:32 [kernel]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Aug 18 17:09:32 [kernel]  bcc17886 e60b3d2c bcc17886 f72f1200 f72f1204 e6073000 e60b3d10 f8b01a67
Aug 18 17:09:32 [kernel] <0> 00000000 e60b3d10 c11d9343 e60730a0 ebacc380 bcc17886 e6073000 00000000
Aug 18 17:09:32 [kernel] <0> ebacc380 e60b3d90 c11da71c 00000000 f7802480 bcc17886 ebacc380 00000000
Aug 18 17:09:32 [kernel]  [<f8b01a67>] ? serial_close+0x3c/0x9a [usbserial]
Aug 18 17:09:32 [kernel]  [<c11d9343>] ? tty_fasync+0x63/0xe3
Aug 18 17:09:32 [kernel]  [<c11da71c>] ? tty_release_dev+0x159/0x47d
Aug 18 17:09:32 [kernel]  [<c11804c5>] ? prio_tree_remove+0x6c/0xc5
Aug 18 17:09:32 [kernel]  [<c1081c5f>] ? put_object+0x46/0x5e
Aug 18 17:09:32 [kernel]  [<c11daa59>] ? tty_release+0x19/0x35
Aug 18 17:09:32 [kernel]  [<c1086836>] ? __fput+0xed/0x1e4
Aug 18 17:09:32 [kernel]  [<c1086951>] ? fput+0x24/0x39
Aug 18 17:09:32 [kernel]  [<c108375e>] ? filp_close+0x4c/0x7b
Aug 18 17:09:32 [kernel]  [<c1028076>] ? put_files_struct+0xc3/0xd2
Aug 18 17:09:32 [kernel]  [<c10280b1>] ? exit_files+0x2c/0x40
Aug 18 17:09:32 [kernel]  [<c1028551>] ? do_exit+0xd0/0x5f5
Aug 18 17:09:32 [kernel]  [<c1031751>] ? recalc_sigpending+0x1b/0x4b
Aug 18 17:09:32 [kernel]  [<c1031b8b>] ? dequeue_signal+0x96/0x154
Aug 18 17:09:32 [kernel]  [<c1028ab1>] ? do_group_exit+0x3b/0x77
Aug 18 17:09:32 [kernel]  [<c1032ec3>] ? get_signal_to_deliver+0x140/0x31b
Aug 18 17:09:32 [kernel]  [<c11d90af>] ? tty_put_char+0x43/0x4b
Aug 18 17:09:32 [kernel]  [<c1002633>] ? do_notify_resume+0xae/0x7fb
Aug 18 17:09:32 [kernel]  [<c11dabcd>] ? tty_read+0x8f/0xb5
Aug 18 17:09:32 [kernel]  [<c11dd0be>] ? n_tty_read+0x0/0x5d2
Aug 18 17:09:32 [kernel]  [<c1085560>] ? vfs_read+0xb4/0x178
Aug 18 17:09:32 [kernel]  [<c11dab3e>] ? tty_read+0x0/0xb5
Aug 18 17:09:32 [kernel]  [<c10856e4>] ? sys_read+0x52/0x8b
Aug 18 17:09:32 [kernel]  [<c1002f6a>] ? work_notifysig+0x13/0x19
Aug 18 17:09:32 [kernel] ---[ end trace 16f434ec7e2925bc ]---
Aug 18 17:09:32 [kernel] Fixing recursive fault but reboot is needed!

My guess is that my driver is doing something "wrong" in terms of it's
interface to the higher level layers and so is causing the oops. Are
there any mechanisms to turn on more checking / debugging in the layers
above the usb-serial layer to try and catch the cause of the problem?
I've already got USB_DEBUG enabled, what others might be relevant
(presumably USB_SERIAL_DEBUG isn't)?

Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: quatech_usb2: vendor implementation of break_ctl

This patch imports the implementation of the break_ctl, throttle and
unthrottle methods from the vendor driver into the staging driver. This
compiles but is not yet tested.

Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: quatech_usb2: vendor implementation of set_termios method

This patch imports the implementation of the set_termios method from the
vendor driver into the staging driver. The common terminal setting
changes should be supported.

Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: quatech_usb2: chars_in_buffer() fix

It seems I can't count.

Patch to fix chars_in_buffer() method (broken in vendor driver), and
subsequently simplify the close() method, making it somewhat less
broken. There is quite a bit more improvement to do on this method
though.

Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: quatech_usb2: TIOCMGET and TIOCMSET removal

Patch to remove TIOCMGET and TIOCMSET from the driver ioctl method, as
they never get used (error in vendor driver).

Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: quatech_usb2: write_room rewrite

The following patch re-writes the write_room method to work in the
obvious sort of way, so it keeps it's promises to the layers above.
Based on feedback from Alan Cox.

Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: quatech_usb2: close, read, and some ioctl support

This patch implements close(), read(), write() and some ioctls, and
fixes some implementation issues in open(). Compared to the previous
patch it doesn't suffer an oops in the module code, however if you try
to open any of the serial devices a second time then an oops occurs in
tty_open(), presumably because my code isn't playing nicely on the
previous close():

Aug 13 11:44:01 [kernel] WARNING: at drivers/char/tty_io.c:1268 tty_open+0x3e5/0x46d()
Aug 13 11:44:01 [kernel] Hardware name: HP Compaq dc5100 MT(PW097ET)
Aug 13 11:44:01 [kernel] Modules linked in: quatech_usb2(C) usbserial snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss nls_iso8859_1 cifs xt_limit xt_NFLOG nfnetlink_log nfnetlink xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables i915 fb drm i2c_algo_bit cfbcopyarea i2c_core video backlight output cfbimgblt cfbfillrect snd_intel8x0 snd_ac97_codec ehci_hcd ac97_bus uhci_hcd snd_pcm snd_timer usbcore snd ohci1394 psmouse ide_cd_mod cdrom tg3 soundcore snd_page_alloc ieee1394 libphy intel_agp agpgart floppy evdev [last unloaded: usbserial]
Aug 13 11:44:01 [kernel] Pid: 26765, comm: stty Tainted: G         C 2.6.31-rc5-git3-gkh #7
Aug 13 11:44:01 [kernel] Call Trace:
Aug 13 11:44:01 [kernel]  [<c11dbef8>] ? tty_open+0x3e5/0x46d
Aug 13 11:44:01 [kernel]  [<c10264e2>] warn_slowpath_common+0x88/0xb0
Aug 13 11:44:01 [kernel]  [<c11dbef8>] ? tty_open+0x3e5/0x46d
Aug 13 11:44:01 [kernel]  [<c102652b>] warn_slowpath_null+0x21/0x3b
Aug 13 11:44:01 [kernel]  [<c11dbef8>] tty_open+0x3e5/0x46d
Aug 13 11:44:01 [kernel]  [<c10883d1>] chrdev_open+0x77/0x113
Aug 13 11:44:01 [kernel]  [<c1083a5d>] __dentry_open+0xb8/0x230
Aug 13 11:44:01 [kernel]  [<c108835a>] ? chrdev_open+0x0/0x113
Aug 13 11:44:01 [kernel]  [<c1084993>] nameidata_to_filp+0x61/0x6a
Aug 13 11:44:01 [kernel]  [<c1091144>] do_filp_open+0x248/0x7cd
Aug 13 11:44:01 [kernel]  [<c106f14f>] ? __do_fault+0x2ba/0x3b2
Aug 13 11:44:01 [kernel]  [<c109a337>] ? alloc_fd+0x6a/0xf1
Aug 13 11:44:01 [kernel]  [<c1083804>] do_sys_open+0x5f/0x12b
Aug 13 11:44:01 [kernel]  [<c1083947>] sys_open+0x2e/0x47
Aug 13 11:44:01 [kernel]  [<c1002e4f>] sysenter_do_call+0x12/0x26
Aug 13 11:44:01 [kernel] ---[ end trace 1d6b9e2cd7636394 ]---
Aug 13 11:44:01 [kernel] BUG: unable to handle kernel NULL pointer dereference at 00000004
Aug 13 11:44:01 [kernel] IP: [<c1086538>] file_move+0x26/0x47
Aug 13 11:44:01 [kernel] *pde = 00000000
Aug 13 11:44:01 [kernel] Modules linked in: quatech_usb2(C) usbserial snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss nls_iso8859_1 cifs xt_limit xt_NFLOG nfnetlink_log nfnetlink xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables i915 fb drm i2c_algo_bit cfbcopyarea i2c_core video backlight output cfbimgblt cfbfillrect snd_intel8x0 snd_ac97_codec ehci_hcd ac97_bus uhci_hcd snd_pcm snd_timer usbcore snd ohci1394 psmouse ide_cd_mod cdrom tg3 soundcore snd_page_alloc ieee1394 libphy intel_agp agpgart floppy evdev [last unloaded: usbserial]
Aug 13 11:44:01 [kernel] Pid: 26765, comm: stty Tainted: G        WC (2.6.31-rc5-git3-gkh #7) HP Compaq dc5100 MT(PW097ET)
Aug 13 11:44:01 [kernel] EIP: 0060:[<c1086538>] EFLAGS: 00010282 CPU: 0
Aug 13 11:44:01 [kernel] EIP is at file_move+0x26/0x47
Aug 13 11:44:01 [kernel] EAX: 00000000 EBX: e593b508 ECX: ea7e9900 EDX: f734a888
Aug 13 11:44:01 [kernel] ESI: 00000000 EDI: 0bc00004 EBP: d8923e10 ESP: d8923e08
Aug 13 11:44:01 [kernel]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Aug 13 11:44:01 [kernel]  2ba6efc8 c8c93180 d8923e48 c11dbca7 ea7e9900 eed37e6c 00000000 00008800
Aug 13 11:44:01 [kernel] <0> 00000000 e593b400 e593b400 00000004 2ba6efc8 c8c93188 00000000 eed37e6c
Aug 13 11:44:01 [kernel] <0> d8923e68 c10883d1 ea7e9900 2ba6efc8 2ba6efc8 ea7e9900 eed37e6c ffffffe9
Aug 13 11:44:01 [kernel]  [<c11dbca7>] ? tty_open+0x194/0x46d
Aug 13 11:44:01 [kernel]  [<c10883d1>] ? chrdev_open+0x77/0x113
Aug 13 11:44:01 [kernel]  [<c1083a5d>] ? __dentry_open+0xb8/0x230
Aug 13 11:44:01 [kernel]  [<c108835a>] ? chrdev_open+0x0/0x113
Aug 13 11:44:01 [kernel]  [<c1084993>] ? nameidata_to_filp+0x61/0x6a
Aug 13 11:44:01 [kernel]  [<c1091144>] ? do_filp_open+0x248/0x7cd
Aug 13 11:44:01 [kernel]  [<c106f14f>] ? __do_fault+0x2ba/0x3b2
Aug 13 11:44:01 [kernel]  [<c109a337>] ? alloc_fd+0x6a/0xf1
Aug 13 11:44:01 [kernel]  [<c1083804>] ? do_sys_open+0x5f/0x12b
Aug 13 11:44:01 [kernel]  [<c1083947>] ? sys_open+0x2e/0x47
Aug 13 11:44:01 [kernel]  [<c1002e4f>] ? sysenter_do_call+0x12/0x26
Aug 13 11:44:01 [kernel] ---[ end trace 1d6b9e2cd7636395 ]---

Read and Write also do not work at the moment, and I'm fairly sure that
the URB completion callbacks are not running. Why this is I don't know,
and haven't tried to investigate.

Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: quatech_usb2: implement open functionality

Part two of the driver implementation has finally got done. It
implements the rest of open and the callback for reads from the box. I
seem to have finally found a structure that can be made to work, with a
single set of URBs for bulk read and write for the whole device, which
are used by all the ports. I've rationalised a few things, but there
will still be a lot of clean-up needed.

This one definitely can panic the kernel when a port is opened for
reading, but I'm off on holiday so I thought I'd post where I have got
to so far. I haven't tried to debug why it panics with a null pointer
dereference yet.

Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add Support for Quatech ESU2-100 USB 2.0 8-port serial adaptor

The patch is of the "works as far as it goes" variety, in that the
module compiles and loads, the device nodes are registered and the unit
switched on, but nothing actually works. On the other hand, it doesn't
panic the kernel, as far as I know.

Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Convert firmware loading to load binary ihex format

Convert prism2_usb firmware loading to load firmware in pre-compiled
binary 'ihex' format rather than ascii 'srec' format. This moves the
srec processing and sorting of records out of kernel space into a
pre-compiler. The driver now just works with the binary image, but
still does the 'pda plugging' of that image at runtime, as required
by the prism hardware.

Some Notes:

- The firmware is now expected to be in the same 'ihex' (.fw) format
  used by other drivers.

- The now driver assumes the data records are already sorted into ascending
  address order.

- Plug and crc records are still recognised by special address locations
  as in original srec processing.

- The srec S7 start address record is assumed to have been converted
  into a data record with another special address location (0xff400000),
  with the original start address being stored as a 4 byte data word
  (little endian).

Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Remove more superflous comments

Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Drop the special case handling of older wireless extensions, WIRELESS_EXT is at 22 for the current kernel.

Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Use kzfree() to securely zero-out the WEP key when freeing it

Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Remove some superflous comments

Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cpc-usb: remove unused #include <linux/version.h>

Remove unused #include <linux/version.h>'s in
drivers/staging/cpc-usb/cpc-usb_drv.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: s626: Possible read buffer overflow fix

If `cmd->chanlist_len' is 0, then we write ppl[-1].

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Remove references to dead EXPORT_SYMTAB

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: no need for checking vfree call

vfree() does it's own NULL checking,so no need for check before
calling it.

'pages' is local variable argment,so in v2, it is no need assignment
 to NULL.

Signed-off-by: Figo.zhang <figo1802@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Comedi: Lindent changes to comdi driver in staging tree

Lindent changes to comdi driver in staging tree.
This patch is followed by the checkpatch.pl error fixes.
Did not make them part of this patch as the patch size is already huge.

Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: Drop an unnecessary NULL test

Apparently, the NULL test is not necessary at this point.

The semantic patch that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: remove dependency on WIRELESS_EXT version

As the driver is in mainline now we can remove such dependency.
WIRELESS_EXT is 22 now and it is always defined.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: Fix warnings in staging/otus/ioctl.c

This fixes a number of warnings in the otus driver.

Signed-off-by: D Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove dependency on WIRELESS_EXT version

As the driver is in mainline now we can remove such dependencies.
WIRELESS_EXT is 22 now.

Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: fix build when !CONFIG_WIRELESS_EXT

Fix this build error when CONFIG_WIRELESS_EXT is not set:
drivers/staging/vt6655/device_main.c:1153: error: 'struct net_device'
has no member named 'wireless_handlers'

Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: Integrate vt6656 into build system.

Integrate drivers/staging/vt6656 into build system.

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: replace call to info with printk call.

vt6656: replace call to info with printk call.

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: use net_device_ops for management functions

vt6656: use net_device_ops for management functions

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: Replace net_device->priv accesses with netdev_priv calls.

vt6656: Replace net_device->priv accesses with netdev_priv calls.

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: main_usb.c: Drop obsolete fsuid/fsgid accesses.

drivers/staging/vt6656/main_usb.c: Drop obsolete fsuid/fsgid accesses.

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: Build vt6656.ko, not vntwusb.ko.

Build vt6656.ko, not vntwusb.ko.

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: Add includes to drivers/staging/vt6656.

Add includes to drivers/staging/vt6656.  These came from the includes directory
in the upstream source archive.  Trailing whitespace was stripped.  This is
GPL-licensed code.

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Add pristine upstream vt6656 driver sources to drivers/staging/vt6656.

Add pristine upstream vt6656 driver sources to drivers/staging/vt6656.  These
files were copied from the driver directory in the upstream source archive,
available here:

  http://www.viaarena.com/Driver/VT6656_Linux_src_v1.19_12_x86.zip

After copying, trailing whitespace was stripped.  This is GPL-licensed code.

Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add rt3090 wireless driver

This is the vendor driver for the Ralink RT3090 chipset.

It should be later cleaned and ported to use the existing rt2x00
infrastructure or just replaced by the proper version.

[ Unfortunately since it follows the same design/implementation like
  rt{286,287,307}0 drivers (already present in the staging tree)
  it is highly unlikely that it will see much love from the wireless
  development community.. ]

However since the development of the cleaner/proper version can take
significant time lets give distros (i.e. openSUSE seems to already
have the package with the original vendor driver) and users "something"
to use in the meantime.

I forward ported it to 2.6.31-rc1, ported to the Linux build system
and did some initial cleanups.  More fixes/cleanups to come later
(it seems that the driver can be made to share most of its code with
the other Ralink drivers already present in the staging tree).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: cleanup r8180_core.c

* remove commented out code
* remove useless comments
* beautify code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: cleanup r8180_rtl8225z2.c

* make read_rtl8225() static
* make tables static const
* remove commented out code
* remove useless comments
* beautify code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: remove unused definitions from r8180.h

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: remove unused definitions from r8180_hw.h

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: merge r8180_pm.c with r8180_core.c

* merge r8180_pm.c with r8180_core.c
* make functions static

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: cleanup r8180_pm.c

* remove unused rtl8180_{save_state,enable_wake}()
* remove commented out code
* beautify code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: merge r8180_rtl8225.c with r8180_rtl8225z2.c

* merge r8180_rtl8225.c with r8180_rtl8225z2.c
* make functions static
* make tables static const
* remove unused rtl8225_set_gain()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: cleanup r8180_rtl8225.c

* remove empty rtl8225_host_usb_init()
* remove commented out code
* remove useless comments
* beautify code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: remove unused rtl8225_rf_* functions

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: remove debugging code from r8180_core.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: remove unused radio frontends

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: remove dead code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: remove CONFIG_RTL8180_IO_MAP ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: remove CONFIG_RTL8185B ifdefs

CONFIG_RTL8185B is defined in drivers/staging/rtl8187se/r8180_hw.h.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: remove CONFIG_RTL818x_S ifdefs

CONFIG_RTL818x_S is defined in drivers/staging/rtl8187se/r8180_hw.h.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: remove THOMAS_TURBO ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>