openwrt/staging/blogic.git
10 years ago[media] mt9v032: Check return value of clk_prepare_enable/clk_set_rate
Lad, Prabhakar [Fri, 17 Jan 2014 09:22:47 +0000 (06:22 -0300)]
[media] mt9v032: Check return value of clk_prepare_enable/clk_set_rate

clk_set_rate(), clk_prepare_enable() functions can fail, so check the return
values to avoid surprises.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] mt9p031: Check return value of clk_prepare_enable/clk_set_rate
Lad, Prabhakar [Tue, 21 Jan 2014 05:20:57 +0000 (02:20 -0300)]
[media] mt9p031: Check return value of clk_prepare_enable/clk_set_rate

clk_set_rate(), clk_prepare_enable() functions can fail, so check the return
values to avoid surprises.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] mt9p031: Add support for PLL bypass
Laurent Pinchart [Sun, 9 Feb 2014 20:31:47 +0000 (17:31 -0300)]
[media] mt9p031: Add support for PLL bypass

When the input clock frequency is out of bounds for the PLL, bypass the
PLL and just divide the input clock to achieve the requested output
frequency.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] mt9p031: Fix typo in comment
Laurent Pinchart [Sat, 8 Feb 2014 16:31:58 +0000 (13:31 -0300)]
[media] mt9p031: Fix typo in comment

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] mt9t001: Add clock support
Laurent Pinchart [Sat, 8 Feb 2014 16:33:46 +0000 (13:33 -0300)]
[media] mt9t001: Add clock support

The sensor needs a master clock, handle it explictly in the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] mt9t001: Add regulator support
Laurent Pinchart [Sat, 8 Feb 2014 16:33:46 +0000 (13:33 -0300)]
[media] mt9t001: Add regulator support

The sensor needs two power supplies, VAA and VDD. Require a regulator
for each of them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] ARM: omap2: cm-t35: Add regulators and clock for camera sensor
Laurent Pinchart [Sat, 8 Feb 2014 16:32:11 +0000 (13:32 -0300)]
[media] ARM: omap2: cm-t35: Add regulators and clock for camera sensor

The camera sensor will soon require regulators and clocks. Register
fixed regulators for its VAA and VDD power supplies and a fixed rate
clock for its master clock.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] omap3isp: Don't ignore failure to locate external subdev
Laurent Pinchart [Sat, 15 Feb 2014 00:45:50 +0000 (21:45 -0300)]
[media] omap3isp: Don't ignore failure to locate external subdev

A failure to locate the external subdev for a non memory-to-memory
pipeline is a fatal error, don't ignore it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Tested-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] omap3isp: Don't try to locate external subdev for mem-to-mem pipelines
Laurent Pinchart [Sat, 15 Feb 2014 00:40:48 +0000 (21:40 -0300)]
[media] omap3isp: Don't try to locate external subdev for mem-to-mem pipelines

Memory-to-memory pipelines have no external subdev, we shouldn't try to
locate one and validate its configuration. The driver currently works by
chance due to another bug that results in failure to locate the external
subdev being ignored.

This gets rid of the "omap3isp omap3isp: can't find source, failing now"
error message in the kernel log when operating on a memory-to-memory
pipeline.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Tested-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] omap3isp: preview: Fix the crop margins
Florian Vaussard [Fri, 17 Jan 2014 19:37:38 +0000 (16:37 -0300)]
[media] omap3isp: preview: Fix the crop margins

Commit 3fdfedaaa "[media] omap3isp: preview: Lower the crop margins"
accidentally changed the previewer's cropping, causing the previewer
to miss four pixels on each line, thus corrupting the final image.
Restored the removed setting.

Cc: stable@vger.kernel.org
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] vivi: queue_setup improvements
Hans Verkuil [Mon, 10 Feb 2014 11:08:47 +0000 (08:08 -0300)]
[media] vivi: queue_setup improvements

Drop the vid_limit module option: there is really no need to limit this.
No other driver does that. If you try to allocate more buffers then vb2
will automatically reduce the number of buffers anyway.

Also add sanity checks if the size in the fmt argument is going to be
used and drop the code that checks against *nbuffers == 0: this can
never happen (the vb2 framework ensures that) and the code was wrong
anyway since *nbuffers should have been set to the minimum number of
required buffers which is 1 for this driver.

Since vivi is often used as a template driver it is good to have this
driver be as compliant as possible. This broken code was for example
copied to the s2255 driver (which is being fixed as well).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] vivi: drop unused field
Hans Verkuil [Mon, 10 Feb 2014 11:08:46 +0000 (08:08 -0300)]
[media] vivi: drop unused field

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] vivi: fix sequence counting
Hans Verkuil [Mon, 10 Feb 2014 11:08:45 +0000 (08:08 -0300)]
[media] vivi: fix sequence counting

The sequence counting was not reset to 0 between each streaming run,
and it was increased only every other frame. This is incorrect behavior:
the confusion is with FIELD_ALTERNATE systems where each field is transmitted
separately and only when both fields have been received is the frame
sequence number increased.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] v4l2-subdev: Allow 32-bit compat ioctls
Hans Verkuil [Mon, 10 Feb 2014 11:08:44 +0000 (08:08 -0300)]
[media] v4l2-subdev: Allow 32-bit compat ioctls

Add support for 32-bit ioctls with v4l-subdev device nodes.

Rather than keep adding new ioctls to the list in v4l2-compat-ioctl32.c, just check
if the ioctl is a non-private V4L2 ioctl and if so, call the conversion code.

We keep forgetting to add new ioctls, so this is a more robust solution.

In addition extend the subdev API with support for a compat32 function to
convert custom v4l-subdev ioctls.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] radio-usb-si4713: make array of structs const
Hans Verkuil [Mon, 10 Feb 2014 11:08:43 +0000 (08:08 -0300)]
[media] radio-usb-si4713: make array of structs const

The start_seq[] should be const.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] get_dvb_firmware: it913x: Remove it9137 firmware files
Malcolm Priestley [Thu, 13 Feb 2014 21:32:19 +0000 (18:32 -0300)]
[media] get_dvb_firmware: it913x: Remove it9137 firmware files

Remove it9137 firmware files it9137.txt and it9137 get_dvb_firmware.

dvb-usb-it9137-01.fw firmware is no longer in use.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] MAINTAINERS: Remove it913x* maintainers entries
Malcolm Priestley [Thu, 13 Feb 2014 21:31:02 +0000 (18:31 -0300)]
[media] MAINTAINERS: Remove it913x* maintainers entries

This driver was removed, and supported devices got moved to
anoher driver.

So, cleanup MAINTAINERS as well.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] it913x-fe: Dead code remove driver
Malcolm Priestley [Thu, 13 Feb 2014 21:29:33 +0000 (18:29 -0300)]
[media] it913x-fe: Dead code remove driver

This driver has been replaced by af9033 and tuner_it913x

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] it913x: dead code Remove driver
Malcolm Priestley [Thu, 13 Feb 2014 21:28:28 +0000 (18:28 -0300)]
[media] it913x: dead code Remove driver

Following moving ids to af9035.

This driver is no longer in use.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] af9035: use default i2c slave address for af9035 too
Antti Palosaari [Wed, 12 Feb 2014 18:50:17 +0000 (15:50 -0300)]
[media] af9035: use default i2c slave address for af9035 too

Some device vendors has forgotten set correct slave demod I2C address
to eeprom. Use default I2C address when eeprom has no address at all.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] af9035: Add remaining it913x dual ids to af9035
Malcolm Priestley [Sun, 9 Feb 2014 13:04:06 +0000 (10:04 -0300)]
[media] af9035: Add remaining it913x dual ids to af9035

As follow on to patch
af9035: Move it913x single devices to af9035
and patch 1.

SNR is reported as db/10 values.

All dual ids are added to af9035 and it913x driver disabled.

it913x/it913x-fe removal patches to follow.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] af9035: add default 0x9135 slave I2C address
Malcolm Priestley [Sun, 9 Feb 2014 13:02:49 +0000 (10:02 -0300)]
[media] af9035: add default 0x9135 slave I2C address

On some devices the vendor has not set EEPROM_2ND_DEMOD_ADDR.

Checks tmp is not zero after call to get EEPROM_2ND_DEMOD_ADDR and sets the
default slave address of 0x3a on 0x9135 devices.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] af9035: Move it913x single devices to af9035
Malcolm Priestley [Sat, 8 Feb 2014 16:11:16 +0000 (13:11 -0300)]
[media] af9035: Move it913x single devices to af9035

The generic v1 and v2 devices have been all tested.

IDs tested
USB_PID_ITETECH_IT9135 v1 & v2
USB_PID_ITETECH_IT9135_9005 v1
USB_PID_ITETECH_IT9135_9006 v2

Current Issues
There is no signal  on
USB_PID_ITETECH_IT9135 v2

No SNR reported all devices.

All single devices tune and scan fine.

All remotes tested okay.

Dual device failed to register second adapter
USB_PID_KWORLD_UB499_2T_T09
It is not clear what the problem is at the moment.

So only single IDs are transferred in this patch.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] tda10071: coding style issues
Antti Palosaari [Tue, 11 Feb 2014 18:13:46 +0000 (15:13 -0300)]
[media] tda10071: coding style issues

Fix some coding style issues, mostly reported by checkpatch.pl.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] tda10071: do not check tuner PLL lock on read_status()
Antti Palosaari [Tue, 11 Feb 2014 03:17:37 +0000 (00:17 -0300)]
[media] tda10071: do not check tuner PLL lock on read_status()

Tuner PLL lock flag was mapped to FE_HAS_SIGNAL, which is wrong. PLL
lock has nothing to do with received signal. In real life that flag
is always set.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] tda10071: remove a duplicative test
Dan Carpenter [Thu, 30 Jan 2014 12:00:34 +0000 (09:00 -0300)]
[media] tda10071: remove a duplicative test

"ret" is an error code here, we already tested that.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] rtl28xxu: add ID [0ccd:00b4] TerraTec NOXON DAB Stick (rev 3)
Till Dörges [Tue, 11 Feb 2014 20:27:57 +0000 (17:27 -0300)]
[media] rtl28xxu: add ID [0ccd:00b4] TerraTec NOXON DAB Stick (rev 3)

I've got the following DAB USB stick that also works fine with the
DVB_USB_RTL28XXU driver after I added its USB ID:
Bus 001 Device 009: ID 0ccd:00b4 TerraTec Electronic GmbH

[crope@iki.fi: apply patch partly manually]
Signed-off-by: Till Dörges <till@doerges.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] em28xx-dvb: fix PCTV 461e tuner I2C binding
Antti Palosaari [Wed, 12 Feb 2014 17:46:44 +0000 (14:46 -0300)]
[media] em28xx-dvb: fix PCTV 461e tuner I2C binding

Add missing m88ts2022 module reference counts as removing that module
is not allowed when it is used by em28xx-dvb module. That same module
was not unregistered correctly, fix it too.

Error cases validated by returning errors from m88ds3103, m88ts2022
and a8293 probe().

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media, edac] Change my email address
Mauro Carvalho Chehab [Fri, 7 Feb 2014 10:03:07 +0000 (08:03 -0200)]
[media, edac] Change my email address

There are several left overs with my old email address.
Remove their occurrences and add myself at CREDITS, to
allow people to be able to reach me on my new addresses.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] DocBook: Add a description for the Remote Controller interface
Mauro Carvalho Chehab [Thu, 6 Feb 2014 12:08:57 +0000 (10:08 -0200)]
[media] DocBook: Add a description for the Remote Controller interface

Adds a missing section to describe the remote controller interface.

The DocBook is just addin the same documentation as written at
Documentation/ABI/testing/sysfs-class-rc, using the DocBook's
way, and dropping timestamps/contact info.

While that means that we'll have the same info on two parts, there
are parts of the remote controller interface that doesn't belong
at Documentation/ABI/, and it makes sense to have everything
on the same place. This also means that we'll need to manually
track to be sure that both places will be synchronized, but, as
it is not expected much changes on it, this sync can be done
manually.

It also adds an introduction that states that the IR is a normal
evdev/input interface, plus the sysfs class nodes.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] DocBook/media_api: Better organize the DocBook
Mauro Carvalho Chehab [Thu, 6 Feb 2014 12:55:28 +0000 (10:55 -0200)]
[media] DocBook/media_api: Better organize the DocBook

All chapters/parts but Remote controllers have the revision
tags inside the body. Move those to remote_controllers.xml and
do some cleanup.

No functional changes.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] media: rc: change 32bit NEC scancode format
James Hogan [Fri, 17 Jan 2014 13:58:50 +0000 (10:58 -0300)]
[media] media: rc: change 32bit NEC scancode format

Change 32bit NEC scancode format (used by Apple and TiVo remotes) to
encode the data with the correct bit order. Previously the raw bits were
used without being bit reversed, now each 16bit half is bit reversed
compared to before.

So for the raw NEC data:
  (LSB/First) 0xAAaaCCcc (MSB/Last)
(where traditionally AA=address, aa=~address, CC=command, cc=~command)

We now generate the scancodes:
  (MSB) 0x0000AACC (LSB) (normal NEC)
  (MSB) 0x00AAaaCC (LSB) (extended NEC, address check wrong)
  (MSB) 0xaaAAccCC (LSB) (32-bit NEC, command check wrong)

Note that the address byte order in 32-bit NEC scancodes is different to
that of the extended NEC scancodes. I chose this way as it maintains the
order of the bits in the address/command fields, and CC is clearly
intended to be the LSB of the command if the TiVo codes are anything to
go by so it makes sense for AA to also be the LSB.

The TiVo keymap is updated accordingly.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] media: rc: add sysfs scancode filtering interface
James Hogan [Fri, 17 Jan 2014 13:58:49 +0000 (10:58 -0300)]
[media] media: rc: add sysfs scancode filtering interface

Add and document a generic sysfs based scancode filtering interface for
making use of IR data matching hardware to filter out uninteresting
scancodes. Two filters exist, one for normal operation and one for
filtering scancodes which are permitted to wake the system from suspend.

The following files are added to /sys/class/rc/rc?/:
 - filter: normal scancode filter value
 - filter_mask: normal scancode filter mask
 - wakeup_filter: wakeup scancode filter value
 - wakeup_filter_mask: wakeup scancode filter mask

A new s_filter() driver callback is added which must arrange for the
specified filter to be applied at the right time. Drivers can convert
the scancode filter into a raw IR data filter, which can be applied
immediately or later (for wake up filters).

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: linux-media@vger.kernel.org
Cc: Rob Landley <rob@landley.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] rc: ir-raw: Load ir-sharp-decoder module at init
James Hogan [Wed, 5 Feb 2014 22:15:16 +0000 (19:15 -0300)]
[media] rc: ir-raw: Load ir-sharp-decoder module at init

Commit 1d184b0bc13d ([media] media: rc: add raw decoder for Sharp
protocol) added a new raw IR decoder for the sharp protocol, but didn't
add the code to load the module at init as is done for other raw
decoders, so add that code now.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] af9035: add ID [2040:f900] Hauppauge WinTV-MiniStick 2
Antti Palosaari [Sat, 1 Feb 2014 14:30:50 +0000 (11:30 -0300)]
[media] af9035: add ID [2040:f900] Hauppauge WinTV-MiniStick 2

Add USB ID [2040:f900] for Hauppauge WinTV-MiniStick 2.
Device is build upon IT9135 chipset.

Tested-by: Stefan Becker <schtefan@gmx.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] nuvoton-cir: Don't touch PS/2 interrupts while initializing
Antti Seppälä [Sat, 25 Jan 2014 09:57:46 +0000 (06:57 -0300)]
[media] nuvoton-cir: Don't touch PS/2 interrupts while initializing

There are reports[1] that on some motherboards loading the nuvoton-cir
disables PS/2 keyboard input. This is caused by an erroneous write of
CIR_INTR_MOUSE_IRQ_BIT to ACPI control register.

According to datasheet the write enables mouse power management event
interrupts which will probably have ill effects if the motherboard has
only one PS/2 port with keyboard in it.

The cir hardware does not need mouse interrupts to function and should
not touch them. This patch removes the illegal writes and registry
definitions.

[1] http://ubuntuforums.org/showthread.php?t=2106277&p=12461912&mode=threaded#post12461912

Reported-by: Bruno Maire <bruno.maire@besonet.ch>
Tested-by: Bruno Maire <bruno.maire@besonet.ch>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] cx23885: Fix tuning regression for TeVii S471
Joakim Hernberg [Fri, 31 Jan 2014 10:15:48 +0000 (07:15 -0300)]
[media] cx23885: Fix tuning regression for TeVii S471

When tuning to 10818V on Astra 28E2, the system tunes to 11343V
instead. This is a regression in the S471 driver introduced with the
changeset: b43ea8068d2090cb1e44632c8a938ab40d2c7419 [media] cx23885:
Fix TeVii S471 regression since introduction of ts2020.

Suggested-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Joakim Hernberg <jhernberg@alchemy.lu>
Tested-by: Mark Clarkstone <hello@markclarkstone.co.uk>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] mceusb: improve error logging
Sean Young [Mon, 20 Jan 2014 22:10:44 +0000 (19:10 -0300)]
[media] mceusb: improve error logging

A number of recent bug reports involve usb_submit_urb() failing which was
only reported with debug parameter on. In addition, remove custom debug
function.

[m.chehab@samsung.com: patch rebased, as one of the patches on this
 series need changes]
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] iguanair: simplify tx loop
Sean Young [Mon, 20 Jan 2014 22:10:39 +0000 (19:10 -0300)]
[media] iguanair: simplify tx loop

Make the code simpler.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] iguanair: explain tx carrier setup
Sean Young [Mon, 20 Jan 2014 22:10:38 +0000 (19:10 -0300)]
[media] iguanair: explain tx carrier setup

Just comments. No functional changes.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] em28xx-i2c: fix the error code for unknown errors
Frank Schaefer [Sun, 19 Jan 2014 21:48:35 +0000 (18:48 -0300)]
[media] em28xx-i2c: fix the error code for unknown errors

Commit e63b009d6e "em28xx-i2c: Fix error code for I2C error transfers"
changed the code to return -ETIMEDOUT on all unknown errors.
But the proper error code for unknown errors is -EIO.
So only report -ETIMEDOUT in case of the errors 0x02 and 0x04, which
are according to Mauro Carvalho Chehab's tests related to i2c clock
stretching and return -EIO for the rest.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] em28xx-i2c: fix the i2c error description strings for -ENXIO
Frank Schaefer [Sun, 19 Jan 2014 21:48:34 +0000 (18:48 -0300)]
[media] em28xx-i2c: fix the i2c error description strings for -ENXIO

Commit d845fb3ae5 "em28xx-i2c: add timeout debug information if i2c_debug enabled"
has added wrong error descriptions for -ENXIO.
The strings are also missing terminating newline characters, which breaks the
output format.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] em28xx-v4l: do not call em28xx_init_camera() if the device has no sensor
Frank Schaefer [Fri, 17 Jan 2014 17:45:32 +0000 (14:45 -0300)]
[media] em28xx-v4l: do not call em28xx_init_camera() if the device has no sensor

This avoids the unnecessary temporary registration of a dummy V4L2 clock.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] em28xx-camera: fix return value checks on sensor probing
Frank Schaefer [Fri, 17 Jan 2014 17:45:31 +0000 (14:45 -0300)]
[media] em28xx-camera: fix return value checks on sensor probing

Since commit e63b009d6e the returned error code in case of not connected/responding
i2c clients is ENXIO isntead of ENODEV, which causes several error messages on
sensor probing.
Fix the i2c return value checks on sensor probing to silence these warnings.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] em28xx-video: do not unregister the v4l2 dummy clock before v4l2_device_unreg...
Frank Schaefer [Fri, 17 Jan 2014 17:45:30 +0000 (14:45 -0300)]
[media] em28xx-video: do not unregister the v4l2 dummy clock before v4l2_device_unregister() has been called

Otherwiese the core refuses to unregister the clock and the following warning
appears in the system log:

"WARNING: ... at drivers/media/v4l2-core/v4l2-clk.c:231 v4l2_clk_unregister+0x8a/0x90 [videodev]()
 v4l2_clk_unregister(): Refusing to unregister ref-counted 11-0030:mclk clock!"

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] em28xx-audio: fix user counting in snd_em28xx_capture_open()
Frank Schaefer [Fri, 17 Jan 2014 17:18:42 +0000 (14:18 -0300)]
[media] em28xx-audio: fix user counting in snd_em28xx_capture_open()

dev->adev.users always needs to be increased when snd_em28xx_capture_open() is
called and succeeds.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] media: rc: add raw decoder for Sharp protocol
James Hogan [Fri, 17 Jan 2014 13:58:48 +0000 (10:58 -0300)]
[media] media: rc: add raw decoder for Sharp protocol

Add a raw decoder for the Sharp protocol. It uses a pulse distance
modulation with a pulse of 320us and a bit period of 2ms for a logical 1
and 1ms for a logical 0. The first part of the message consists of a
5-bit address, an 8-bit command, and two other bits, followed by a 40ms
gap before the echo message which is an inverted version of the main
message except for the address bits.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] media: rc: add Sharp infrared protocol
James Hogan [Fri, 17 Jan 2014 13:58:47 +0000 (10:58 -0300)]
[media] media: rc: add Sharp infrared protocol

Add Sharp infrared protocol constants RC_TYPE_SHARP and RC_BIT_SHARP.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] media: rc: document rc class sysfs API
James Hogan [Fri, 17 Jan 2014 13:58:46 +0000 (10:58 -0300)]
[media] media: rc: document rc class sysfs API

Briefly document /sys/class/rc/ API for remote controller devices in
Documentation/ABI/teting.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] media: rc: only turn on LED if keypress generated
James Hogan [Thu, 16 Jan 2014 22:56:22 +0000 (19:56 -0300)]
[media] media: rc: only turn on LED if keypress generated

Since v3.12, specifically 153a60bb0fac ([media] rc: add feedback led
trigger for rc keypresses), an LED trigger is activated on IR keydown
whether or not a keypress is generated (i.e. even if there's no matching
keycode). However the repeat and keyup logic isn't used unless there is
a keypress, which results in non-keypress keydown events turning on the
LED and not turning it off again.

On the assumption that the intent was for the LED only to light up on
valid key presses (you probably don't want it lighting up for the wrong
remote control for example), move the led_trigger_event() call inside
the keycode check.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] FE_READ_SNR and FE_READ_SIGNAL_STRENGTH docs
Georgi Chorbadzhiyski [Thu, 16 Jan 2014 15:07:11 +0000 (12:07 -0300)]
[media] FE_READ_SNR and FE_READ_SIGNAL_STRENGTH docs

Around 01/14/2014 06:07 PM, Mauro Carvalho Chehab scribbled:
> Em Tue, 14 Jan 2014 17:55:19 +0200
> Georgi Chorbadzhiyski <gf@unixsol.org> escreveu:
>> Around 01/14/2014 05:30 PM, Mauro Carvalho Chehab scribbled:
>>> Em Tue, 14 Jan 2014 17:16:10 +0200
>>> Georgi Chorbadzhiyski <gf@unixsol.org> escreveu:
>>>
>>>> Hi guys, I'm confused the documentation on:
>>>>
>>>> http://linuxtv.org/downloads/v4l-dvb-apis/frontend_fcalls.html#FE_READ_SNR
>>>> http://linuxtv.org/downloads/v4l-dvb-apis/frontend_fcalls.html#FE_READ_SIGNAL_STRENGTH
>>>>
>>>> states that these ioctls return int16_t values but frontend.h states:
>>>>
>>>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/include/uapi/linux/dvb/frontend.h
>>>>
>>>> #define FE_READ_SIGNAL_STRENGTH  _IOR('o', 71, __u16)
>>>> #define FE_READ_SNR              _IOR('o', 72, __u16)
>>>>
>>>> So which one is true?
>>>
>>> Documentation is wrong. The returned values are unsigned. Would you mind send
>>> us a patch fixing it?
>>
>> I would be happy to, but I can't find the repo that holds the documentation.
>
> It is in the Kernel tree, under Documentation/DocBook/media/dvb.

The attached file contains the discussed documentation fixes.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] rc-core: ir_core_dev_number can be static
Fengguang Wu [Wed, 15 Jan 2014 22:42:57 +0000 (19:42 -0300)]
[media] rc-core: ir_core_dev_number can be static

Fix sparse warning:
drivers/media/rc/rc-main.c:27:1: sparse: symbol 'ir_core_dev_number' was not declared. Should it be static?

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] em28xx-cards: em28xx_devused can be static
Fengguang Wu [Wed, 15 Jan 2014 21:50:26 +0000 (18:50 -0300)]
[media] em28xx-cards: em28xx_devused can be static

Fix sparse warning:
drivers/media/usb/em28xx/em28xx-cards.c:69:1: sparse: symbol 'em28xx_devused' was not declared. Should it be static?

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] DocBook: partial rewrite of "Opening and Closing Devices"
Hans Verkuil [Tue, 4 Feb 2014 12:55:19 +0000 (09:55 -0300)]
[media] DocBook: partial rewrite of "Opening and Closing Devices"

This section was horribly out of date. A lot of references to old and
obsolete behavior have been dropped.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] DocBook media: add revision entry for 3.15
Hans Verkuil [Mon, 3 Feb 2014 10:29:03 +0000 (07:29 -0300)]
[media] DocBook media: add revision entry for 3.15

[m.chehab@samsung.com: removed "Opening and Closing Devices" from the
 list of changes, as the patch with such change weren't applied]

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] DocBook media: drop the old incorrect packed RGB table
Hans Verkuil [Tue, 7 Jan 2014 13:01:27 +0000 (10:01 -0300)]
[media] DocBook media: drop the old incorrect packed RGB table

The old table is most definitely wrong. All applications and all
drivers that I have ever tested follow the corrected table. Furthermore,
that's what all applications expect as well. Any drivers that do not
follow the corrected table are broken and should be fixed.

This patch drops the old table and replaces it with the corrected
table. This should prevent a lot of confusion.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] DocBook media: update three sections of common.xml
Hans Verkuil [Tue, 7 Jan 2014 12:39:57 +0000 (09:39 -0300)]
[media] DocBook media: update three sections of common.xml

Updates for the "Tuners and Modulators", "Video Standards" and
"Digital Video (DV) Timings" sections.

Besides lots of trivial little fixes the main changes are:

- Remove two footnotes from "Video Standards": the first is a discussion
  of alternative methods of setting standards, which is pretty pointless
  since the standards API is effectively frozen anyway, and the second
  points to 'rationale' that makes little or no sense to me.

- Clarify a few things in the "Digital Video (DV) Timings" section.
  It was awkwardly formatted as well: there used to be a list with
  multiple bullets that has been reduced to a single item, so drop the
  list and rewrite that text.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] DocBook media: Cleanup some sections at common.xml
Hans Verkuil [Tue, 7 Jan 2014 11:17:35 +0000 (08:17 -0300)]
[media] DocBook media: Cleanup some sections at common.xml

Updates sections "Querying Capabilities", "Application Priority",
"Video Inputs and Outputs" and "Audio Inputs and Outputs".

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] DocBook media: update copyright years and Introduction
Hans Verkuil [Tue, 7 Jan 2014 09:46:37 +0000 (06:46 -0300)]
[media] DocBook media: update copyright years and Introduction

It's now 2014, so update those copyright years. Also fix a typo in the introduction
and mention that this document also covers output, codec and remote control
devices.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] DocBook media: fix email addresses
Hans Verkuil [Tue, 7 Jan 2014 09:41:16 +0000 (06:41 -0300)]
[media] DocBook media: fix email addresses

Mauro's old redhat email address is no longer valid, update to the
current email address.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] v4l2-dv-timings: mention missing 'reduced blanking V2'
Hans Verkuil [Fri, 31 Jan 2014 13:32:16 +0000 (10:32 -0300)]
[media] v4l2-dv-timings: mention missing 'reduced blanking V2'

The VESA standard added a version 2 of the reduced blanking formula.
Note in the comment that this is not yet supported by the v4l2_detect_cvt
function. Obviously this should be implemented eventually, but for now add
this as a reminder.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] v4l2-dv-timings.h: add new 4K DMT resolutions
Hans Verkuil [Fri, 31 Jan 2014 13:32:15 +0000 (10:32 -0300)]
[media] v4l2-dv-timings.h: add new 4K DMT resolutions

VESA added two new DMT timings in their latest standard document. Add these
to v4l2-dv-timings.h.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] s2255drv: checkpatch fix: coding style fix
sensoray-dev [Wed, 29 Jan 2014 18:24:07 +0000 (15:24 -0300)]
[media] s2255drv: checkpatch fix: coding style fix

Fixes all style warnings from scripts/checkpatch -f

Signed-off-by: Dean Anderson <linux-dev@sensoray.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] radio-keene: Use module_usb_driver
Sachin Kamat [Mon, 27 Jan 2014 11:56:02 +0000 (08:56 -0300)]
[media] radio-keene: Use module_usb_driver

module_usb_driver eliminates the boilerplate and makes the code simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] adv7842: platform-data for Hotplug Active (HPA) manual/auto
Martin Bugge [Fri, 24 Jan 2014 13:50:06 +0000 (10:50 -0300)]
[media] adv7842: platform-data for Hotplug Active (HPA) manual/auto

This applies to HDMI-map register 0x69.
So far we have been using HPA manual mode.
This way we had control of HPA which could be
set after EDID had been programmed.

Using a Mac Mini with mini-displayport to DVI-D converter as source
caused the adv7842 to lock up and fail to detect any further signals.

After experimenting with different configurations it was found that
using the HPA auto mode and in addition letting RX-termination
be controlled by HPA prevented this error from occuring.

I was not able to re-create this problem on the adv7604.

Signed-off-by: Martin Bugge <marbugge@cisco.com>
Cc: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] adv7842: log-status for Audio Video Info frames (AVI)
Martin Bugge [Fri, 24 Jan 2014 13:50:05 +0000 (10:50 -0300)]
[media] adv7842: log-status for Audio Video Info frames (AVI)

Clear any pending AVI checksum-errors.
To be able to display last received AVI.

Signed-off-by: Martin Bugge <marbugge@cisco.com>
Cc: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] adv7842: pixelclock read-out
Martin Bugge [Fri, 24 Jan 2014 13:50:04 +0000 (10:50 -0300)]
[media] adv7842: pixelclock read-out

Incorrect registers used for pixelclock read-out.
Same registers as for adv7604 which actually gave an almost
correct read-out, even they are not documented for adv7842.
Corrected deep-color pixel-clock correction.

Signed-off-by: Martin Bugge <marbugge@cisco.com>
Cc: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] adv7842: adjust gain and offset for DVI-D signals
Martin Bugge [Fri, 24 Jan 2014 13:50:03 +0000 (10:50 -0300)]
[media] adv7842: adjust gain and offset for DVI-D signals

If the input signal is DVI-D and quantization range is RGB full range,
gain and offset must be adjusted to get the right range on the output.
Copied and adopted from adv7604.

Signed-off-by: Martin Bugge <marbugge@cisco.com>
Cc: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] s3c-camif: Remove use of deprecated V4L2_CTRL_FLAG_DISABLED
Hans Verkuil [Mon, 20 Jan 2014 09:27:09 +0000 (06:27 -0300)]
[media] s3c-camif: Remove use of deprecated V4L2_CTRL_FLAG_DISABLED

I came across this while checking the kernel use of V4L2_CTRL_FLAG_DISABLED.

This flag should not be used with the control framework. Instead, just don't
add the control at all.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] usbvision: drop unused define USBVISION_SAY_AND_WAIT
Hans Verkuil [Fri, 17 Jan 2014 10:27:27 +0000 (07:27 -0300)]
[media] usbvision: drop unused define USBVISION_SAY_AND_WAIT

This define uses the deprecated interruptible_sleep_on_timeout
function. Since this define is unused anyway we just remove it.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] usbtv: fix compiler error due to missing module.h
Hans Verkuil [Tue, 4 Feb 2014 09:00:52 +0000 (06:00 -0300)]
[media] usbtv: fix compiler error due to missing module.h

usbtv-video.c needs module.h. So move the module.h include from usbtv-core.c to usbtv.h,
that way both core.c and video.c have it.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years ago[media] usbtv: split core and video implementation
Federico Simoncelli [Tue, 7 Jan 2014 22:13:21 +0000 (19:13 -0300)]
[media] usbtv: split core and video implementation

Signed-off-by: Federico Simoncelli <fsimonce@redhat.com>
Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
10 years agoMerge tag 'v3.14-rc1' into patchwork
Mauro Carvalho Chehab [Mon, 3 Feb 2014 17:32:45 +0000 (15:32 -0200)]
Merge tag 'v3.14-rc1' into patchwork

Linus 3.14-rc1

* tag 'v3.14-rc1': (11781 commits)
  Linus 3.14-rc1
  hpfs: optimize quad buffer loading
  hpfs: remember free space
  parisc: add flexible mmap memory layout support
  parisc: Make EWOULDBLOCK be equal to EAGAIN on parisc
  parisc: convert uapi/asm/stat.h to use native types only
  parisc: wire up sched_setattr and sched_getattr
  parisc: fix cache-flushing
  parisc/sti_console: prefer Linux fonts over built-in ROM fonts
  hwmon: Fix SENSORS_TMP102 dependencies to eliminate build errors
  hwmon: Fix SENSORS_LM75 dependencies to eliminate build errors
  tools/power turbostat: introduce -s to dump counters
  tools/power turbostat: remove unused command line option
  afs: proc cells and rootcell are writeable
  tile: remove compat_sys_lookup_dcookie declaration to fix compile error
  Revert "PCI: Remove from bus_list and release resources in pci_release_dev()"
  ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA
  ARM: multi_v7_defconfig: add mvebu drivers
  clocksource: kona: Add basic use of external clock
  drivers: bus: fix CCI driver kcalloc call parameters swap
  ...

10 years agoLinus 3.14-rc1
Linus Torvalds [Mon, 3 Feb 2014 00:42:13 +0000 (16:42 -0800)]
Linus 3.14-rc1

10 years agoMerge branch 'parisc-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/deller...
Linus Torvalds [Mon, 3 Feb 2014 00:32:53 +0000 (16:32 -0800)]
Merge branch 'parisc-3.14' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc updates from Helge Deller:
 "The three major changes in this patchset is a implementation for
  flexible userspace memory maps, cache-flushing fixes (again), and a
  long-discussed ABI change to make EWOULDBLOCK the same value as
  EAGAIN.

  parisc has been the only platform where we had EWOULDBLOCK != EAGAIN
  to keep HP-UX compatibility.  Since we will probably never implement
  full HP-UX support, we prefer to drop this compatibility to make it
  easier for us with Linux userspace programs which mostly never checked
  for both values.  We don't expect major fall-outs because of this
  change, and if we face some, we will simply rebuild the necessary
  applications in the debian archives"

* 'parisc-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: add flexible mmap memory layout support
  parisc: Make EWOULDBLOCK be equal to EAGAIN on parisc
  parisc: convert uapi/asm/stat.h to use native types only
  parisc: wire up sched_setattr and sched_getattr
  parisc: fix cache-flushing
  parisc/sti_console: prefer Linux fonts over built-in ROM fonts

10 years agohpfs: optimize quad buffer loading
Mikulas Patocka [Tue, 28 Jan 2014 23:11:33 +0000 (00:11 +0100)]
hpfs: optimize quad buffer loading

HPFS needs to load 4 consecutive 512-byte sectors when accessing the
directory nodes or bitmaps.  We can't switch to 2048-byte block size
because files are allocated in the units of 512-byte sectors.

Previously, the driver would allocate a 2048-byte area using kmalloc,
copy the data from four buffers to this area and eventually copy them
back if they were modified.

In the current implementation of the buffer cache, buffers are allocated
in the pagecache.  That means that 4 consecutive 512-byte buffers are
stored in consecutive areas in the kernel address space.  So, we don't
need to allocate extra memory and copy the content of the buffers there.

This patch optimizes the code to avoid copying the buffers.  It checks
if the four buffers are stored in contiguous memory - if they are not,
it falls back to allocating a 2048-byte area and copying data there.

Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agohpfs: remember free space
Mikulas Patocka [Tue, 28 Jan 2014 23:10:44 +0000 (00:10 +0100)]
hpfs: remember free space

Previously, hpfs scanned all bitmaps each time the user asked for free
space using statfs.  This patch changes it so that hpfs scans the
bitmaps only once, remembes the free space and on next invocation of
statfs it returns the value instantly.

New versions of wine are hammering on the statfs syscall very heavily,
making some games unplayable when they're stored on hpfs, with load
times in minutes.

This should be backported to the stable kernels because it fixes
user-visible problem (excessive level load times in wine).

Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoparisc: add flexible mmap memory layout support
Helge Deller [Fri, 31 Jan 2014 21:19:52 +0000 (22:19 +0100)]
parisc: add flexible mmap memory layout support

Add support for the flexible mmap memory layout (as described in
http://lwn.net/Articles/91829). This is especially very interesting on
parisc since we currently only support 32bit userspace (even with a
64bit Linux kernel).

Signed-off-by: Helge Deller <deller@gmx.de>
10 years agoparisc: Make EWOULDBLOCK be equal to EAGAIN on parisc
Guy Martin [Thu, 16 Jan 2014 16:17:53 +0000 (17:17 +0100)]
parisc: Make EWOULDBLOCK be equal to EAGAIN on parisc

On Linux, only parisc uses a different value for EWOULDBLOCK which
causes a lot of troubles for applications not checking for both values.
Since the hpux compat is long dead, make EWOULDBLOCK behave the same as
all other architectures.

Signed-off-by: Guy Martin <gmsoft@tuxicoman.be>
Signed-off-by: Helge Deller <deller@gmx.de>
10 years agoparisc: convert uapi/asm/stat.h to use native types only
Helge Deller [Fri, 31 Jan 2014 22:00:38 +0000 (23:00 +0100)]
parisc: convert uapi/asm/stat.h to use native types only

The stat.h header file is exported to userspace. Some userspace
applications failed to compile due to missing/unknown types, so we
better convert it to use native types only (like it's done on other
architectures too).

Signed-off-by: Helge Deller <deller@gmx.de>
10 years agoparisc: wire up sched_setattr and sched_getattr
Helge Deller [Fri, 31 Jan 2014 21:29:17 +0000 (22:29 +0100)]
parisc: wire up sched_setattr and sched_getattr

Signed-off-by: Helge Deller <deller@gmx.de>
10 years agoparisc: fix cache-flushing
Helge Deller [Fri, 31 Jan 2014 20:33:17 +0000 (21:33 +0100)]
parisc: fix cache-flushing

This commit:
f8dae00684d678afa13041ef170cecfd1297ed40: parisc: Ensure full cache coherency for kmap/kunmap
caused negative caching side-effects, e.g. hanging processes with expect and
too many inequivalent alias messages from flush_dcache_page() on Debian 5 systems.

This patch now partly reverts it and has been in production use on our debian buildd
makeservers since a week without any major problems.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Helge Deller <deller@gmx.de>
10 years agoparisc/sti_console: prefer Linux fonts over built-in ROM fonts
Helge Deller [Fri, 31 Jan 2014 14:39:40 +0000 (15:39 +0100)]
parisc/sti_console: prefer Linux fonts over built-in ROM fonts

The built-in ROM fonts lack many necessary ASCII characters, which is
why it makes sens to prefer the Linux fonts instead if they are
available.  This makes consoles on STI graphics cards which are not
supported by the stifb driver (e.g. Visualize FXe) looks much nicer.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v3.13
10 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelv...
Linus Torvalds [Sun, 2 Feb 2014 19:30:57 +0000 (11:30 -0800)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging

Pull hwmon kconfig fixes from Jean Delvare.

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: Fix SENSORS_TMP102 dependencies to eliminate build errors
  hwmon: Fix SENSORS_LM75 dependencies to eliminate build errors

10 years agoMerge branch 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg...
Linus Torvalds [Sun, 2 Feb 2014 19:30:08 +0000 (11:30 -0800)]
Merge branch 'slab/next' of git://git./linux/kernel/git/penberg/linux

Pull SLAB changes from Pekka Enberg:
 "Random bug fixes that have accumulated in my inbox over the past few
  months"

* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  mm: Fix warning on make htmldocs caused by slab.c
  mm: slub: work around unneeded lockdep warning
  mm: sl[uo]b: fix misleading comments
  slub: Fix possible format string bug.
  slub: use lockdep_assert_held
  slub: Fix calculation of cpu slabs
  slab.h: remove duplicate kmalloc declaration and fix kernel-doc warnings

10 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Linus Torvalds [Sun, 2 Feb 2014 19:28:48 +0000 (11:28 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux

Pull turbostat updates from Len Brown.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: introduce -s to dump counters
  tools/power turbostat: remove unused command line option
  turbostat: Add option to report joules consumed per sample
  turbostat: run on HSX
  turbostat: Add a .gitignore to ignore the compiled turbostat binary
  turbostat: Clean up error handling; disambiguate error messages; use err and errx
  turbostat: Factor out common function to open file and exit on failure
  turbostat: Add a helper to parse a single int out of a file
  turbostat: Check return value of fscanf
  turbostat: Use GCC's CPUID functions to support PIC
  turbostat: Don't attempt to printf an off_t with %zx
  turbostat: Don't put unprocessed uapi headers in the include path

10 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
Linus Torvalds [Sun, 2 Feb 2014 19:11:06 +0000 (11:11 -0800)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Here's a set of patches for (hopefully) -rc1.  Some of them are fixes,
  but a good number of them also do things such as enable new drivers in
  the defconfigs for platforms that have such devices, increases
  coverage of the multiplatform defconfig and some DTS changes that
  plumbs up some of the devices that now have bindings and driver
  support.

  The commit dates are recent; we've mostly collected these fixes in the
  last few days but I also had to rebuild the branch yesterday to sort
  out some internal conflicts which reset the timestamps.  The changes
  should have been tested by each platform maintainer already (and few
  of them have cross-platform impact) so I'm personally not too
  concerned by it at this time"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
  ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA
  ARM: multi_v7_defconfig: add mvebu drivers
  clocksource: kona: Add basic use of external clock
  drivers: bus: fix CCI driver kcalloc call parameters swap
  ARM: dts: bcm28155-ap: Fix Card Detection GPIO
  ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHY
  ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not set
  MAINTAINERS: ARM: SiRF: use regex patterns to involve all SiRF drivers
  ARM: dts: zynq: Add SDHCI nodes
  ARM: hisi: don't select SMP
  ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS
  ARM: multi_v7: copy most options from tegra_defconfig
  ARM: iop32x: fix power off handling for the EM7210 board
  ARM: integrator: restore static map on the CP
  ARM: msm_defconfig: Enable MSM clock drivers
  ARM: dts: msm: Add clock controller nodes and hook into uart
  ARM: OMAP4+: move errata initialization to omap4_pm_init_early
  ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle
  ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP)
  ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference
  ...

10 years agohwmon: Fix SENSORS_TMP102 dependencies to eliminate build errors
Jean Delvare [Sun, 2 Feb 2014 16:59:07 +0000 (17:59 +0100)]
hwmon: Fix SENSORS_TMP102 dependencies to eliminate build errors

Similar to what was done for the lm75 driver.

Add depends on THERMAL since that is what provides the
register/unregister functions above, but only if THERMAL_OF was
selected as this is an optional feature of the driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
10 years agohwmon: Fix SENSORS_LM75 dependencies to eliminate build errors
Jean Delvare [Sun, 2 Feb 2014 16:59:07 +0000 (17:59 +0100)]
hwmon: Fix SENSORS_LM75 dependencies to eliminate build errors

Based on an earlier attempt by Randy Dunlap.

Fix SENSORS_LM75 dependencies to eliminate build errors:

drivers/built-in.o: In function `lm75_remove':
lm75.c:(.text+0x12bd8c): undefined reference to `thermal_zone_of_sensor_unregister'
drivers/built-in.o: In function `lm75_probe':
lm75.c:(.text+0x12c123): undefined reference to `thermal_zone_of_sensor_register'

Add depends on THERMAL since that is what provides the
register/unregister functions above, but only if THERMAL_OF was
selected as this is an optional feature of the driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
10 years agotools/power turbostat: introduce -s to dump counters
Andy Shevchenko [Thu, 23 Jan 2014 15:13:15 +0000 (17:13 +0200)]
tools/power turbostat: introduce -s to dump counters

The new option allows just run turbostat and get dump of counter values. It's
useful when we have something more than one program to test.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
10 years agotools/power turbostat: remove unused command line option
Andy Shevchenko [Thu, 23 Jan 2014 15:13:14 +0000 (17:13 +0200)]
tools/power turbostat: remove unused command line option

The -s is not used, let's remove it, and update quick help accordingly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
10 years agoMerge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Linus Torvalds [Sat, 1 Feb 2014 19:03:16 +0000 (11:03 -0800)]
Merge branch 'misc' of git://git./linux/kernel/git/mmarek/kbuild

Pull misc kbuild changes from Michal Marek:
 "The non-critical part of kbuild is small this time:
   - Three fixes for make deb-pkg
   - A new coccinelle check

  One of the deb-pkg fixes is a leftover from the last merge window,
  hence the merge commit"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  deb-pkg: Fix building for MIPS big-endian or ARM OABI
  deb-pkg: Fix cross-building linux-headers package
  scripts: Coccinelle script for pm_runtime_* return checks with IS_ERR_VALUE
  deb-pkg: Inhibit initramfs builders if CONFIG_BLK_DEV_INITRD is not set

10 years agoafs: proc cells and rootcell are writeable
Pali Rohár [Tue, 28 Jan 2014 20:26:44 +0000 (20:26 +0000)]
afs: proc cells and rootcell are writeable

Both proc files are writeable and used for configuring cells. But
there is missing correct mode flag for writeable files. Without
this patch both proc files are read only.

[ It turns out they aren't really read-only, since root can write to
  them even if the write bit isn't set due to CAP_DAC_OVERRIDE ]

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agotile: remove compat_sys_lookup_dcookie declaration to fix compile error
Heiko Carstens [Fri, 31 Jan 2014 06:50:36 +0000 (07:50 +0100)]
tile: remove compat_sys_lookup_dcookie declaration to fix compile error

With commit d8d14bd09cdd ("fs/compat: fix lookup_dcookie() parameter
handling") I changed the type of the len parameter of the
lookup_dcookie() syscall.

However I missed that there was still a stale declaration in
arch/tile/..  which now causes a compile error on tile:

  In file included from fs/dcookies.c:28:0:
  include/linux/compat.h:425:17: error: conflicting types for 'compat_sys_lookup_dcookie'
  fs/dcookies.c:207:1: error: conflicting types for 'compat_sys_lookup_dcookie'

Simply remove the declaration in the tile architecture, which is only a
leftover from before the different compat lookup_dcookie() versions have
been merged.  The correct declaration is now in include/linux/compat.h

The build error was reported by Fenguang's build bot.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Sat, 1 Feb 2014 18:52:45 +0000 (10:52 -0800)]
Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "A set of cifs fixes (mostly for symlinks, and SMB2 xattrs) and
  cleanups"

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix check for regular file in couldbe_mf_symlink()
  [CIFS] Fix SMB2 mounts so they don't try to set or get xattrs via cifs
  CIFS: Cleanup cifs open codepath
  CIFS: Remove extra indentation in cifs_sfu_type
  CIFS: Cleanup cifs_mknod
  CIFS: Cleanup CIFSSMBOpen
  cifs: Add support for follow_link on dfs shares under posix extensions
  cifs: move unix extension call to cifs_query_symlink()
  cifs: Re-order M-F Symlink code
  cifs: Add create MFSymlinks to protocol ops struct
  cifs: use protocol specific call for query_mf_symlink()
  cifs: Rename MF symlink function names
  cifs: Rename and cleanup open_query_close_cifs_symlink()
  cifs: Fix memory leak in cifs_hardlink()

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Sat, 1 Feb 2014 18:43:45 +0000 (10:43 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull vfs fixes from Al Viro:
 "Several obvious fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Fix mountpoint reference leakage in linkat
  hfsplus: use xattr handlers for removexattr
  Typo in compat_sys_lseek() declaration
  fs/super.c: sync ro remount after blocking writers
  vfs: unexport the getname() symbol

10 years agoMerge tag 'staging-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Sat, 1 Feb 2014 18:29:59 +0000 (10:29 -0800)]
Merge tag 'staging-3.14-rc1' of git://git./linux/kernel/git/gregkh/staging

Pull rtl8812ae staging wireless driver from Greg KH:
 "Here's a single staging driver for a wireless chipset that has shown
  up in the SteamBox hardware.  It is merged separately from the "main"
  staging pull request to sync up with the wireless api changes that
  came in from the networking tree.

  It's self-contained and works for me and others.  Larry will be
  replacing it with a "real" driver for 3.15, but for now this one is
  needed"

* tag 'staging-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8821ae: Enable build by reverting BROKEN marking
  staging: r8821ae: Fix build problems
  Staging: rtl8812ae: disable due to build errors
  Staging: rtl8821ae: add TODO file
  Staging: rtl8821ae: removed unused functions and variables
  Staging: rtl8821ae: rc.c: fix up function prototypes
  Staging: rtl8812ae: Add Realtek 8821 PCI WIFI driver

10 years agoRevert "PCI: Remove from bus_list and release resources in pci_release_dev()"
Rafael J. Wysocki [Sat, 1 Feb 2014 14:38:29 +0000 (15:38 +0100)]
Revert "PCI: Remove from bus_list and release resources in pci_release_dev()"

Revert commit ef83b0781a73 "PCI: Remove from bus_list and release
resources in pci_release_dev()" that made some nasty race conditions
become possible.  For example, if a Thunderbolt link is unplugged
and then replugged immediately, the pci_release_dev() resulting from
the hot-remove code path may be racing with the hot-add code path
which after that commit causes various kinds of breakage to happen
(up to and including a hard crash of the whole system).

Moreover, the problem that commit ef83b0781a73 attempted to address
cannot happen any more after commit 8a4c5c329de7 "PCI: Check parent
kobject in pci_destroy_dev()", because pci_destroy_dev() will now
return immediately if it has already been executed for the given
device.

Note, however, that the invocation of msi_remove_pci_irq_vectors()
removed by commit ef83b0781a73 from pci_free_resources() along with
the other changes made by it is not added back because of subsequent
code changes depending on that modification.

Fixes: ef83b0781a73 (PCI: Remove from bus_list and release resources in pci_release_dev())
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA
Olof Johansson [Fri, 31 Jan 2014 23:21:08 +0000 (15:21 -0800)]
ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA

TI_EDMA fell out of automatically selected options in the multi_v7
defconfig due to a select being removed from the davinci Kconfig entry. So
we need to re-enable explicitly to not regress some platforms.

The rest is just the result of running 'make multi_v7_defconfig + make
savedefconfig' to remove entries that are no longer needed due to changed
dependencies/selects or defaults.

Signed-off-by: Olof Johansson <olof@lixom.net>
10 years agoARM: multi_v7_defconfig: add mvebu drivers
Olof Johansson [Fri, 31 Jan 2014 23:20:07 +0000 (15:20 -0800)]
ARM: multi_v7_defconfig: add mvebu drivers

Recent boot farm testing has highlighted some issues with mvebu and
multiplatform kernels.  Increase the test coverage so we can discover
these issues earlier.

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Olof Johansson <olof@lixom.net>