Rafał Miłecki [Mon, 19 Jan 2015 11:05:22 +0000 (11:05 +0000)]
bcm53xx: add support/firmware for Asus RT-AC87U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44051
Steven Barth [Mon, 19 Jan 2015 08:39:04 +0000 (08:39 +0000)]
netifd: add option to customize IPv6 interface identifiers (thx Hans Dedecker)
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44050
Zoltan Herpai [Mon, 19 Jan 2015 00:00:57 +0000 (00:00 +0000)]
packages: uboot-sunxi: uEnv is used as a script rather than default env
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44048
Felix Fietkau [Sun, 18 Jan 2015 20:17:41 +0000 (20:17 +0000)]
ralink: fix ethernet rx buffer size breakage
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44047
Felix Fietkau [Sun, 18 Jan 2015 20:17:28 +0000 (20:17 +0000)]
ralink: improve check rx sg function. use check frags instead of function call
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44046
Felix Fietkau [Sun, 18 Jan 2015 20:17:18 +0000 (20:17 +0000)]
ralink: correct handle hardware rx 2bytes offset
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44045
Felix Fietkau [Sun, 18 Jan 2015 20:17:07 +0000 (20:17 +0000)]
ralink: use fe_reset to control all reset
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44044
Felix Fietkau [Sun, 18 Jan 2015 20:16:50 +0000 (20:16 +0000)]
ralink: improve tx_timeout function
* use default timeout value
* print more debug ring info
* move timeout reset function to workqueue
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44043
Felix Fietkau [Sun, 18 Jan 2015 20:16:44 +0000 (20:16 +0000)]
ralink: add ethernet fe and esw reset control bit
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44042
Felix Fietkau [Sun, 18 Jan 2015 20:16:35 +0000 (20:16 +0000)]
ralink: reduce access to uncached tx/rx dma ring buffer
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44041
Zoltan Herpai [Sun, 18 Jan 2015 16:58:35 +0000 (16:58 +0000)]
sunxi: update Olimex A13 SOM profile
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 44040
Zoltan Herpai [Sun, 18 Jan 2015 16:56:08 +0000 (16:56 +0000)]
packages: uboot-sunxi: re-add Olimex A13 SOM which went AWOL in u-boot trunk
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 44039
Zoltan Herpai [Sun, 18 Jan 2015 16:47:50 +0000 (16:47 +0000)]
packages: uboot-sunxi: remove unused Hackberry target
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 44038
Luka Perkov [Sun, 18 Jan 2015 16:45:11 +0000 (16:45 +0000)]
uboot-envtools: fix Linksys EA3500 env size
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 44037
Luka Perkov [Sun, 18 Jan 2015 16:45:01 +0000 (16:45 +0000)]
kirkwood: enable switch on Linksys EA3500
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 44036
Zoltan Herpai [Sun, 18 Jan 2015 16:42:42 +0000 (16:42 +0000)]
packages: update uboot-sunxi to 2015.01
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44035
Zoltan Herpai [Sun, 18 Jan 2015 14:28:13 +0000 (14:28 +0000)]
kernel: add missing config symbol for 3.18
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 44034
John Crispin [Sun, 18 Jan 2015 10:26:57 +0000 (10:26 +0000)]
mac80211: add throughput trigger to ath10k
add a led trigger to ath10k based on the ath9k code
Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>
SVN-Revision: 44033
John Crispin [Sun, 18 Jan 2015 09:41:04 +0000 (09:41 +0000)]
lantiq: DGN3500 cleanups
This patch builds on the previous three to streamline support for the
Netgear DGN3500.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 44032
John Crispin [Sun, 18 Jan 2015 09:40:58 +0000 (09:40 +0000)]
lantiq: Restore call to orphaned etop function
It seems the call to ltq_get_eth_mac() disappeared at some point. This
patch puts it where it currently most makes sense.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 44031
John Crispin [Sun, 18 Jan 2015 09:40:53 +0000 (09:40 +0000)]
kernel: preserve bootloader command line on MIPS
Somewhere in the conversion of the MIPS architecture code to Device Tree
usage, there's been a failure to keep the separate variables holding the
kernel command line reconciled between the tree and the bootloader. This
patch restores previous functionality that broke.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 44030
John Crispin [Sun, 18 Jan 2015 09:40:47 +0000 (09:40 +0000)]
lantiq: Fix initscript issue
Currently this initscript fails if the macaddr has any leading zeroes.
This patch corrects the problem.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 44029
Felix Fietkau [Sun, 18 Jan 2015 09:25:49 +0000 (09:25 +0000)]
ramips: downgrade mt7621 "Spurious GIC Interrupt" to debug messages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44028
Felix Fietkau [Sun, 18 Jan 2015 09:25:43 +0000 (09:25 +0000)]
ramips: add mt7621 cpu feature overrides
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44027
Felix Fietkau [Sun, 18 Jan 2015 09:25:38 +0000 (09:25 +0000)]
kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44026
Felix Fietkau [Sun, 18 Jan 2015 09:25:32 +0000 (09:25 +0000)]
ramips: refresh kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44025
Felix Fietkau [Sun, 18 Jan 2015 09:25:27 +0000 (09:25 +0000)]
kernel: backport upstream commit to fix MIPS cache shift with secondary cache enabled
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44024
Felix Fietkau [Sun, 18 Jan 2015 00:54:06 +0000 (00:54 +0000)]
ar8216: display flow control info in swconfig get_link in case of autonegatiation too
The swconfig get_link attribute (at least) on AR8327/AR8337 doesn't
consider the autonegotiated flow control.
AR8327/AR8337 provide the info about autonegotiated rx/tx flow control
in bits 10 and 11 of the port status register.
Use these values to display info about autonegotiated rx/tx flow
control as part of the get_link attribute.
Successfully tested on TL-WDR4900 (AR8327 rev.4) and
TL-WDR4300 (AR8327 rev.2).
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44023
Felix Fietkau [Sun, 18 Jan 2015 00:53:59 +0000 (00:53 +0000)]
ar8216: add 802.3az EEE info to swconfig get_link attribute
AR8327/AR8337 allow to read the result of EEE autonegotiation.
If EEE is autonegotiated between the link partners, display
this as part of the swconfig get_link attribute.
eee100: 100MBit EEE supported by both link partners
eee1000: 1GBit EEE supported by both link partners
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44022
Felix Fietkau [Sun, 18 Jan 2015 00:53:53 +0000 (00:53 +0000)]
ar8216: introduce enable_eee swconfig attribute to control 802.3az EEE per port
Users reported network issues with AR8327 which turned out to be caused
by EEE not working correctly with certain link partners (ticket 14597).
The workaround was to disable EEE on all ports (changeset 41577).
The issue was with certain link partners only, therefore this patch
allows to control usage of EEE per port via swconfig.
Still the default is to initially disable EEE on all ports.
Successfully tested on a TL-WDR4900 (AR8327 rev.4)
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44021
Felix Fietkau [Sun, 18 Jan 2015 00:42:43 +0000 (00:42 +0000)]
igmpproxy: add patch to silence unnecessary logging of downstream igmp traffic
This patch adds a simple check to silence logging of messages about
unrecognized igmp packets which originate from devices in local network.
Without this patch igmpproxy floods openwrt syslog with messages such as:
user.warn igmpproxy[19818]: The source address 192.168.1.175 for group
239.255.250.250, is not in any valid net for upstream VIF.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
SVN-Revision: 44020
Felix Fietkau [Sun, 18 Jan 2015 00:37:18 +0000 (00:37 +0000)]
build: explicitly unexport CONFIG_SITE
On systems with CONFIG_SITE in the environment (e.g. OpenSUSE) make will export
the CONFIG_SITE set in include/package.mk by default. This will cause host
builds to get the target site configuration, leading to all kinds of weirdness
(wrong pointer size, wrong endianess).
Fix this by explicitly unexporting CONFIG_SITE. The explicit export for the
target builds overrides the unexport, so the target builds will still correctly
get the site config.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44019
Felix Fietkau [Sun, 18 Jan 2015 00:34:57 +0000 (00:34 +0000)]
build: allow changing kernel name in new image code
Necessary for targets using zImage or other kernel
image types.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 44018
Felix Fietkau [Sat, 17 Jan 2015 21:22:36 +0000 (21:22 +0000)]
ramips: add missing copyright info for relocate stub
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44017
Felix Fietkau [Sat, 17 Jan 2015 21:20:05 +0000 (21:20 +0000)]
ramips: add preliminary support for DIR-860L B1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44016
Felix Fietkau [Sat, 17 Jan 2015 21:19:57 +0000 (21:19 +0000)]
build: allow passing parameters to padjffs2 via the pad-rootfs command
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44015
Felix Fietkau [Sat, 17 Jan 2015 21:19:38 +0000 (21:19 +0000)]
ramips: add code for relocating a kernel to the right place
(used if the boot loader wants a different loadaddr/entry)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44014
Felix Fietkau [Sat, 17 Jan 2015 21:19:30 +0000 (21:19 +0000)]
ramips: enable the seama mtdsplit parser
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44013
Felix Fietkau [Sat, 17 Jan 2015 21:19:24 +0000 (21:19 +0000)]
build: add image makefile helper function for pading with an offset
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44012
John Crispin [Sat, 17 Jan 2015 19:10:40 +0000 (19:10 +0000)]
brcm2708: missing symbols caused a build fail
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44011
Felix Fietkau [Sat, 17 Jan 2015 16:50:59 +0000 (16:50 +0000)]
ramips: register mt76 device tree info for WSR-1166DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44010
Felix Fietkau [Sat, 17 Jan 2015 16:50:51 +0000 (16:50 +0000)]
ramips: register mt7621 pcie through device tree
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44009
John Crispin [Sat, 17 Jan 2015 14:50:59 +0000 (14:50 +0000)]
ralink: sync mt7621 pcie driver with latest SDK
fixes newer ECO versions and a hang on reboot bug
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44008
John Crispin [Sat, 17 Jan 2015 14:39:01 +0000 (14:39 +0000)]
target: kirkwood: fix leds defaults config
Fix missing parameters in 01_leds
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 44007
John Crispin [Sat, 17 Jan 2015 14:38:55 +0000 (14:38 +0000)]
dnsmasq: add option --quiet-dhcp
The --quiet-dhcp setting increases privacy by omitting DHCP lease logs including MAC addresses.
Signed-off-by: Lars Kruse <devel@sumpfralle.de>
SVN-Revision: 44006
John Crispin [Sat, 17 Jan 2015 14:31:30 +0000 (14:31 +0000)]
Support for building an hardened OpenWRT
Introduce configuration options to build an "hardened" OpenWRT.
Options to enable Stack-Smashing Protection, FORTIFY_SOURCE and RELRO
have been introduced.
uClibc makefile now automatically detects if SSP support is necessary.
hostapd makefile has been fixed to use "^" as sed separator since
using a comma was problematic when using "-Wl,-z,now" and the like in
TARGET_CFLAGS.
Currently enabling SSP on user space depends on enabling SSP kernel
side, this is due to the fact that TARGET_CFLAGS are used to build
kernel modules (at least). Suggestions on how to avoid this are welcome.
Using "select" instead of "depends on" doesn't seem to work with choice
entries.
Tested with a lantiq (WBMR) router, GCC 4.8, uClibc and a subset of
the available packages.
Needs to be tested with GCC 4.9 and the remaining packages.
PIE not currently included.
Signed-off-by: Alessandro Di Federico <ale+owrt@clearmind.me>
SVN-Revision: 44005
John Crispin [Sat, 17 Jan 2015 14:24:56 +0000 (14:24 +0000)]
ar8216: introduce ar8xxx_reg_clear complementing ar8xxx_reg_set
Introduce ar8xxx_reg_clear complementing ar8xxx_reg_set.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44004
John Crispin [Sat, 17 Jan 2015 14:24:47 +0000 (14:24 +0000)]
ar8216: replace ar8xxx_rmw with ar8xxx_reg_set where appropriate
Replace ar8xxx_rmw with ar8xxx_reg_set where appropriate.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44003
John Crispin [Sat, 17 Jan 2015 14:24:40 +0000 (14:24 +0000)]
ar8216: define all switch_addr structs as const
Define all switch_addr structs as const.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44002
John Crispin [Sat, 17 Jan 2015 14:06:13 +0000 (14:06 +0000)]
ramips: add support for Intenso Memory 2 Move USB 3.0
This adds support for a rt5350-based "portable nas" solution
from Intenso. The board comes with 32M RAM and 8M Flash, the
built-in HDD is connected/accessible via a usb3.0<->sata
bridge VLI VL701.
The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0
socket (for charging the battery, or accessing the hdd directly).
Wireless connectivity is provided by the rt5350 SoC [i.e.:
802.11n 1x1 2.4 GHz with a pcb antenna.]
Serial, leds, wifi, ethernet and usb are tested and
as far as I can tell: they are working fine (tm).
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
SVN-Revision: 44001
John Crispin [Sat, 17 Jan 2015 13:58:14 +0000 (13:58 +0000)]
base-files: Add ucidef_set_led_timer to uci-defaults.sh
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 44000
John Crispin [Sat, 17 Jan 2015 13:58:09 +0000 (13:58 +0000)]
modules: Add kmod-w1-slave-ds2413
This patch adds support for building the ds2413 one-wire kernel module.
Signed-off-by: Wouter Paesen <wouter@blue-gate.be>
SVN-Revision: 43999
John Crispin [Sat, 17 Jan 2015 13:58:03 +0000 (13:58 +0000)]
toolchain: Add libatomic when using external toolchain
Otherwise libatomic cannot be used in conjunction with external toolchains.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 43998
John Crispin [Sat, 17 Jan 2015 13:57:56 +0000 (13:57 +0000)]
curl: allow enabling https protocol
Provide optional --enable-https flag for curl.
Signed-off-by: Lars Kruse <devel@sumpfralle.de>
SVN-Revision: 43997
Felix Fietkau [Sat, 17 Jan 2015 13:14:02 +0000 (13:14 +0000)]
add iperf3, a new and smaller version of iperf
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43996
Felix Fietkau [Sat, 17 Jan 2015 13:13:55 +0000 (13:13 +0000)]
ramips: fix tx bql related race condition in the ethernet driver
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43995
John Crispin [Sat, 17 Jan 2015 12:52:28 +0000 (12:52 +0000)]
add pkgconfig information for popt library
Modify makefile to record pkgconfig information for the popt library.
Signed-off-by: Mike Brady <mikebrady@eircom.net>
SVN-Revision: 43994
Steven Barth [Sat, 17 Jan 2015 10:58:34 +0000 (10:58 +0000)]
iproute2: add package for bridge program
The 'bridge' program has been part of iproute2 for a while, and it was once
declared[1] to the the intended longterm replacement for bridge-utils, but
its features are still mostly distinct[2] from the venerable brctl.
[1] http://lwn.net/Articles/435845/
[2] http://sgros-students.blogspot.com/2013/11/comparison-of-brctl-and-bridge-commands.html
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 43993
Steven Barth [Sat, 17 Jan 2015 10:58:29 +0000 (10:58 +0000)]
iproute2: fix header problem for musl
iproute2 includes "sanitized" linux kernel headers, which work fine for uClibc, however
with musl there is some header conflict, principally some ipv6 structure redefinition. This
patch removes <linux/in6.h> from include/linux/if_bridge.h to solve the problem.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 43992
Steven Barth [Sat, 17 Jan 2015 10:58:22 +0000 (10:58 +0000)]
iproute2: bump version to 3.18.0
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 43991
John Crispin [Sat, 17 Jan 2015 07:07:36 +0000 (07:07 +0000)]
ralink: add support for Kingston MLWG2
This patch adds support for the Kingston Mobilelite Wireless G2 (MLWG2)
http://wiki.openwrt.org/toh/kingston/mlwg2
https://github.com/gmacario/kingston-mlwg2-hack/wiki/Testing-OpenWrt-on-MLWG2
Tested-by: Gianpaolo Macario <gmacario@gmail.com>
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 43990
John Crispin [Sat, 17 Jan 2015 07:07:28 +0000 (07:07 +0000)]
kernel: add references to openwrt alternative button handling
Add documentation that makes it easier to find the alternative,
recommended, and default handling for buttons in OpenWrt.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
SVN-Revision: 43989
John Crispin [Sat, 17 Jan 2015 07:07:21 +0000 (07:07 +0000)]
Remove old P2812HNUFX dts
Remove unused P2812HNUFX board definition.
Signed-off-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 43988
John Crispin [Sat, 17 Jan 2015 07:07:15 +0000 (07:07 +0000)]
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK
Signed-off-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 43987
John Crispin [Sat, 17 Jan 2015 07:07:06 +0000 (07:07 +0000)]
lantiq: Add device tree for P2812HNUF1 and P2812HNUF3
Add device tree for P2812HNUF1 and P2812HNUF3.
Signed-off-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 43986
John Crispin [Sat, 17 Jan 2015 07:06:59 +0000 (07:06 +0000)]
ramips: add i2c pingroup to the pinmux for rt-n14u
i2c pins are wired to wps a reset button
Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com>
SVN-Revision: 43985
John Crispin [Sat, 17 Jan 2015 07:06:51 +0000 (07:06 +0000)]
ramips: fix default led configuration for rt-n14u
use new helper function to generate default led configuration
Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com>
SVN-Revision: 43984
John Crispin [Sat, 17 Jan 2015 07:06:45 +0000 (07:06 +0000)]
ar71xx: fix board detection for TP-LINK TL-WA860RE
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 43983
Jo-Philipp Wich [Fri, 16 Jan 2015 19:04:19 +0000 (19:04 +0000)]
dnsmasq: support and use local-service by default (#14951)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43982
Rafał Miłecki [Fri, 16 Jan 2015 15:59:29 +0000 (15:59 +0000)]
bcm53xx: drop hacky patch making bcma init later
The only reason this patch was helping was moving bcma init *after*
of_serial init. It was a bit of luck because both drivers use
device_initcall.
It isn't really a correct way to provide early logging.
Now we have earlyprintk support in bcm53xx we can drop this patch.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43981
Rafał Miłecki [Fri, 16 Jan 2015 14:50:51 +0000 (14:50 +0000)]
config: enable EARLY_PRINTK on bcm53xx by default
It's useful for debugging and safe at the same time as we enable it per
device.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43980
Rafał Miłecki [Fri, 16 Jan 2015 12:48:27 +0000 (12:48 +0000)]
brcm47xx: backport BCM47XX arch patches (clean NVRAM code, later init)
SVN-Revision: 43979
Imre Kaloz [Fri, 16 Jan 2015 08:44:15 +0000 (08:44 +0000)]
mvebu: fixups for the new driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43978
Felix Fietkau [Thu, 15 Jan 2015 21:40:44 +0000 (21:40 +0000)]
musl: update to version 1.1.6
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43977
Steven Barth [Thu, 15 Jan 2015 17:59:06 +0000 (17:59 +0000)]
openssl: update to 1.0.1l *sigh*
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43976
Imre Kaloz [Thu, 15 Jan 2015 13:59:01 +0000 (13:59 +0000)]
mvebu: add the new tlc59116 driver and migrate the Mamba to it
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43975
Felix Fietkau [Thu, 15 Jan 2015 12:19:20 +0000 (12:19 +0000)]
ar71xx: fix disable_irq() on chained irq handlers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43974
Felix Fietkau [Thu, 15 Jan 2015 12:19:12 +0000 (12:19 +0000)]
kernel: fix disable_irq() on MIPS CPU IRQs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43973
Rafał Miłecki [Wed, 14 Jan 2015 13:41:05 +0000 (13:41 +0000)]
bcm53xx: support all RAM on devices with more than 128 MiB (HIGHMEM)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43972
Felix Fietkau [Wed, 14 Jan 2015 13:20:38 +0000 (13:20 +0000)]
ath9k: fix irq storm issues (#18483)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43971
Imre Kaloz [Wed, 14 Jan 2015 12:09:33 +0000 (12:09 +0000)]
malta: copy initramfs images
Malta ramdisk images are no longer copied to output due to a recent change.
This change reimplements copying of ramdisk images for Malta builds.
Signed-off-by: Eric Schultz <eschultz@prplfoundation.org>
SVN-Revision: 43970
Imre Kaloz [Wed, 14 Jan 2015 11:39:20 +0000 (11:39 +0000)]
mvebu: Switch to the generic mkuimage macro
The mvebu image makefile define something almost identical to the generic
implementation found in include/image.mk.
Switch to this implementation.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
SVN-Revision: 43969
Imre Kaloz [Wed, 14 Jan 2015 11:37:29 +0000 (11:37 +0000)]
mvebu: Replace the padjffs2 call by the generic definition
The mvebu image Makefile directly calls the padjffs2 utility, while there's an
generic make function to do just that. Switch to it
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
SVN-Revision: 43968
Luka Perkov [Wed, 14 Jan 2015 09:59:26 +0000 (09:59 +0000)]
mdns: install uci package as config
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 43967
Imre Kaloz [Wed, 14 Jan 2015 08:53:11 +0000 (08:53 +0000)]
netfilter: handle NFT_MASQ_IPV6
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43966
Rafał Miłecki [Wed, 14 Jan 2015 07:42:48 +0000 (07:42 +0000)]
bcm53xx: enable earlyprintk on more devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43965
Rafał Miłecki [Wed, 14 Jan 2015 07:03:42 +0000 (07:03 +0000)]
bcm53xx: enable HIGHMEM to support more than 128 MiB of RAM
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43964
Rafał Miłecki [Wed, 14 Jan 2015 07:03:17 +0000 (07:03 +0000)]
bcm53xx: refresh configs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43963
Steven Barth [Tue, 13 Jan 2015 19:00:39 +0000 (19:00 +0000)]
map: export calculated ruleset to /tmp
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43961
Jo-Philipp Wich [Tue, 13 Jan 2015 10:23:44 +0000 (10:23 +0000)]
tools: libtool relocatable fixes
Make sure that libtool and libtoolize call grep relative to
$STAGING_DIR as well.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43960
Jo-Philipp Wich [Tue, 13 Jan 2015 07:49:10 +0000 (07:49 +0000)]
tools: bootstrap libtool to pickup the correct in-tree automake
Also fix 000-relocatable.patch to avoid accidential sed invocations in bootstrap.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43959
Jo-Philipp Wich [Tue, 13 Jan 2015 07:49:01 +0000 (07:49 +0000)]
tools: bootstrap automake to pickup the correct in-tree autoconf
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43958
Jo-Philipp Wich [Tue, 13 Jan 2015 07:48:52 +0000 (07:48 +0000)]
tools: add dummy scripts for help2man and makeinfo
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43957
Jo-Philipp Wich [Tue, 13 Jan 2015 07:48:37 +0000 (07:48 +0000)]
tools: change automake depends to libtool depends
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43956
Jo-Philipp Wich [Tue, 13 Jan 2015 07:48:24 +0000 (07:48 +0000)]
tools: make libtool depend on automake, not vice versa
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43955
Felix Fietkau [Tue, 13 Jan 2015 00:34:49 +0000 (00:34 +0000)]
ramips: add missing -Os cflag for mt7621
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43954
Felix Fietkau [Tue, 13 Jan 2015 00:34:45 +0000 (00:34 +0000)]
ramips: use a larger number of rx descriptors on mt7621 to work around rx overrun related packet loss
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43953
Felix Fietkau [Tue, 13 Jan 2015 00:34:38 +0000 (00:34 +0000)]
ramips: remove interrupt coalescing, it is unnecessary with napi polling and could reduce throughput
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43952
Rafał Miłecki [Mon, 12 Jan 2015 22:10:00 +0000 (22:10 +0000)]
hostapd: backport patch fixing handling new stations
This patch fixes adding new stations for some specific drivers when
using more than 1 BSS.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43951
Imre Kaloz [Mon, 12 Jan 2015 20:16:36 +0000 (20:16 +0000)]
netfilter: handle nft_masq and nft_masq_ipv4
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43950
projects / openwrt / staging / blocktrron.git / log