Zoltan Herpai [Mon, 15 Sep 2014 21:05:00 +0000 (21:05 +0000)]
sunxi: add new watchdog compats to reboot code in 3.14
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42558
Zoltan Herpai [Mon, 15 Sep 2014 19:37:23 +0000 (19:37 +0000)]
sunxi: update profile of A13-OLinuXino to match uboot boardname, required for sdcard image
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42557
John Crispin [Mon, 15 Sep 2014 16:19:33 +0000 (16:19 +0000)]
lantiq: revert vr9 driver update as it causes problems
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42556
John Crispin [Mon, 15 Sep 2014 16:18:48 +0000 (16:18 +0000)]
kernel-build: fix STRIP_KERNEL_EXPORTS for recent kernels
Recent kernels started to mark exported symbols as global.
Adapt expressions in kernel-build.mk to also match global symbols
when grep'ing through nm output.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 42555
Felix Fietkau [Mon, 15 Sep 2014 16:09:23 +0000 (16:09 +0000)]
hostapd: remove bogus default setting for wps_pin (#17873)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42553
John Crispin [Mon, 15 Sep 2014 10:19:38 +0000 (10:19 +0000)]
ar71xx: add qihoo 360 c301 router support
Qihoo 360 C301 is a dual band wireless router supports 802.11n and 802.11ac.
Its chipset is AR9344 + AR9882 with two 16MB flashes.
This patch adds its initial support.
v2:
* use mtd_get_mac_ascii to fetch MAC address for ath10k.
* use ath79_register_pci to initialize AR9882.
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
SVN-Revision: 42552
John Crispin [Mon, 15 Sep 2014 10:19:27 +0000 (10:19 +0000)]
lantiq: fix switch init on vr9 SoC (3.10)
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42551
John Crispin [Mon, 15 Sep 2014 10:19:20 +0000 (10:19 +0000)]
lantiq: fix switch init on vr9 SoC
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42550
John Crispin [Mon, 15 Sep 2014 10:19:14 +0000 (10:19 +0000)]
ar71xx: add board support for ubnt loco m xw
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 42549
John Crispin [Mon, 15 Sep 2014 10:19:01 +0000 (10:19 +0000)]
ar71xx: refactor ubnt xw board setup
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 42548
John Crispin [Mon, 15 Sep 2014 10:18:56 +0000 (10:18 +0000)]
include: remove file before overwritting it with replace_script
config.{sub,guess} could be symlinks to a shared common version of
this file (e.g. in staging). So we remove the destination file via
--remove-destination option of cp. This prevents replaceing the
common file that other packages could be build with if running at
the same time.
This fixes a class of errors where config.sub is missing, or
only partially present when running configure because a cp is
currently in progress
This is commonly seen building with a lot of parallel jobs and
on packages that use 'PKG_FIXUP:=autoreconf'
Signed-off-by: Matthew McClintock <mmcclint@qca.qualcomm.com>
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 42547
John Crispin [Mon, 15 Sep 2014 10:18:50 +0000 (10:18 +0000)]
iproute2: update from v3.15.0 to v3.16.0
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 42546
John Crispin [Mon, 15 Sep 2014 10:18:45 +0000 (10:18 +0000)]
procd: update to latest git HEAD
fixed timeout on shutdown and cmdline param parsing
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42545
John Crispin [Mon, 15 Sep 2014 10:18:37 +0000 (10:18 +0000)]
lantiq: add default switch setup to td8970
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42544
Steven Barth [Mon, 15 Sep 2014 10:15:23 +0000 (10:15 +0000)]
libreadline: bump to 6.3
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42543
Luka Perkov [Sun, 14 Sep 2014 23:15:00 +0000 (23:15 +0000)]
base-files: whitespace fixes
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42542
Hauke Mehrtens [Sun, 14 Sep 2014 19:22:49 +0000 (19:22 +0000)]
bcm53xx: fix early serial console
This device actually has a 8250 serial with a shift of 0.
Tested this on a BCM4708.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 42538
Rafał Miłecki [Sun, 14 Sep 2014 17:31:13 +0000 (17:31 +0000)]
kernel: update bcma to the tag master-2014-09-11 (wireless-next)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42537
Hauke Mehrtens [Sun, 14 Sep 2014 15:00:33 +0000 (15:00 +0000)]
kernel: add missing config option
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 42536
Rafał Miłecki [Sun, 14 Sep 2014 14:58:13 +0000 (14:58 +0000)]
kernel: move bcma patches pushed to wireless-next
We used separated patch for patches that were sent but not accepted yet.
It has changed now, so let's use the standard patch file for them.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42535
Zoltan Herpai [Sun, 14 Sep 2014 13:47:42 +0000 (13:47 +0000)]
sunxi: add sdcard image generation support when board profile is selected
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42534
Zoltan Herpai [Sun, 14 Sep 2014 13:09:22 +0000 (13:09 +0000)]
sunxi: rename pcduino profile to match uboot boardname in prep for the sdcard generator
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42533
Hauke Mehrtens [Sun, 14 Sep 2014 12:06:59 +0000 (12:06 +0000)]
kernel: add missing config option
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 42532
Hauke Mehrtens [Sun, 14 Sep 2014 12:06:38 +0000 (12:06 +0000)]
kernel: make hwmon-lm75 only depend on kmod-thermal if needed
This fixes commit r42529 and closes #17855.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 42531
Felix Fietkau [Sun, 14 Sep 2014 11:40:51 +0000 (11:40 +0000)]
ath9k_htc: fix decryption errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42530
Hauke Mehrtens [Sat, 13 Sep 2014 23:03:36 +0000 (23:03 +0000)]
kernel: make kmod-hwmon-lm75 depend on kmod-thermal
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 42529
Hauke Mehrtens [Sat, 13 Sep 2014 22:10:00 +0000 (22:10 +0000)]
kernel: do not deactivate CONFIG_BLK_DEV
CONFIG_BLK_DEV does not activate any functionality, but many code, but
makes it possible to activate other options. Deactivating this breaks
the build of kmod-zram.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 42528
Hauke Mehrtens [Sat, 13 Sep 2014 21:25:21 +0000 (21:25 +0000)]
kernel: add missing config options
These missing option were found by the build bots.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 42527
Hauke Mehrtens [Sat, 13 Sep 2014 20:56:55 +0000 (20:56 +0000)]
cyassl: update to version 3.2.0
This fixes a security problem:
Security fix for RSA Padding check vulnerability
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 42526
Hauke Mehrtens [Sat, 13 Sep 2014 20:56:13 +0000 (20:56 +0000)]
ppp: update to version 2.4.7
This fixes: CVE-2014-3158 and some other bugs.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 42525
Hauke Mehrtens [Sat, 13 Sep 2014 20:35:10 +0000 (20:35 +0000)]
package: other.mk: update configuration for ad799x
The ad799x driver moved out of staging since kernel 3.16, so update filepath,
config elements and description.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
SVN-Revision: 42524
Hauke Mehrtens [Sat, 13 Sep 2014 20:34:44 +0000 (20:34 +0000)]
kernel: Backport essential fixes for ad799x
This series of patches ports back some fixes of the ad799x driver, which were
commited between 3.10 and 3.15.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
SVN-Revision: 42523
Hauke Mehrtens [Sat, 13 Sep 2014 20:28:44 +0000 (20:28 +0000)]
bcm53xx: select nvram package by default
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42522
Hauke Mehrtens [Sat, 13 Sep 2014 20:28:18 +0000 (20:28 +0000)]
package: nvram: enable on bcm53xx target
It uses mtd, so doesn't require any special adjustments for new target.
It has been succesfully tested (reading, writing and commiting).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42521
Hauke Mehrtens [Sat, 13 Sep 2014 20:27:52 +0000 (20:27 +0000)]
Kconfig: Fix missing help text in DEVEL config menu
This patch completes missing help text for some options under CONFIG_DEVEL.
Provides help for BINARY_FOLDER and DOWNLOAD_FOLDER, and reduces ambiguity in
the help for BUILD_SUFFIX with an example.
Signed-off-by: Andrew McDonnell <bugs@andrewmcdonnell.net>
SVN-Revision: 42520
Hauke Mehrtens [Sat, 13 Sep 2014 20:27:25 +0000 (20:27 +0000)]
Kconfig: Various typo/grammar/line-length fixes in Config*.in files
Non-functional changes to config/Config-*.in files, including:
* spelling mistakes
* inconsistent terminology
* grammar
* overly long lines in "help" components
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
SVN-Revision: 42519
Hauke Mehrtens [Sat, 13 Sep 2014 20:26:51 +0000 (20:26 +0000)]
Kconfig: Aesthetic/formatting fixes to toolchain/Config.in.
Non-functional edits to toolchain/Config.in:
* fix spelling mistake ("us" -> "is")
* Overly long help lines shortened to avoid line wrap
* Standardize help info to use tab(s), then two spaces
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
SVN-Revision: 42518
Hauke Mehrtens [Sat, 13 Sep 2014 20:26:08 +0000 (20:26 +0000)]
curl: 7.36.0 -> 7.38.0
Main changes:
- URL parser: IPv6 zone identifiers are now supported
- cyassl: Use error-ssl.h when available (drop local patch)
- polarssl: support CURLOPT_CAPATH / --capath
- mkhelp: generate code for --disable-manual as well (drop local patch)
Full release notes: http://curl.haxx.se/changes.html
MIPS 34kc binary size:
- 7.36.0 before: 82,539 bytes
- 7.38.0 after: 83,321 bytes
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
SVN-Revision: 42517
Steven Barth [Fri, 12 Sep 2014 12:25:55 +0000 (12:25 +0000)]
toolchain: packetize libatomic
Based on a patch by Tobias Steinicke <tobias.steinicke@inet.tu-berlin.de>.
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42514
John Crispin [Fri, 12 Sep 2014 06:54:16 +0000 (06:54 +0000)]
atheros: refresh config
Remove symbols that are now placed in the generic config.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42513
John Crispin [Fri, 12 Sep 2014 06:54:10 +0000 (06:54 +0000)]
atheros: convert AR2315 GPIO code to platform driver
Convert gpiolib realization to platform driver and move to the
appropriate subdirectory. Misc GPIO interrupt acknowledgement placed
to the MISC IRQ handler since in fact we can detect only one GPIO state
change.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42512
John Crispin [Fri, 12 Sep 2014 06:54:05 +0000 (06:54 +0000)]
atheros: convert AR5312 GPIO code to platform driver
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42511
John Crispin [Fri, 12 Sep 2014 06:53:58 +0000 (06:53 +0000)]
atheros: rework chained interrupts handling
Call generic_handle_irq() instead of do_IRQ() for chained interrupts,
remove XXX_NONE interrupts and call spurious_interrupt() when an interrupt
is unexpected.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42510
John Crispin [Fri, 12 Sep 2014 06:53:53 +0000 (06:53 +0000)]
atheros: convert gpio.h to stub
Implement to_irq() handler for AR2315 GPIO chip and convert custom
gpio.h header to stub.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42509
John Crispin [Fri, 12 Sep 2014 06:53:48 +0000 (06:53 +0000)]
atheros: rename SoCs config symbols
Rename config symbols to be consistent with other SoCs config symbols
supported by MIPS arch.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42508
John Crispin [Fri, 12 Sep 2014 06:53:43 +0000 (06:53 +0000)]
atheros: add AR2316 and AR2318 SoCs detection
Tested with AR2315, AR2316 and AR2317 SoCs, not tested with AR2318 but
changes seems correct: revision is one more than AR2317.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42507
John Crispin [Fri, 12 Sep 2014 06:53:33 +0000 (06:53 +0000)]
atheros: ar2315-pci: convert to platform driver
Convert the PCI controller support code to platform driver and move it to
appropriate subdirectory.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42506
John Crispin [Fri, 12 Sep 2014 06:53:27 +0000 (06:53 +0000)]
atheros: ar2315-pci: rename configuration symbol
Rename configuration symbol to be consistent with other MIPS machines.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42505
John Crispin [Fri, 12 Sep 2014 06:53:21 +0000 (06:53 +0000)]
atheros: ar2315-pci: update DMA offset macroses
Remove duplicated macroses, which define DMA offset (SDRAM baseaddress).
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42504
John Crispin [Fri, 12 Sep 2014 06:53:15 +0000 (06:53 +0000)]
atheros: ar2315-pci: update host bridge resources
It seems that the PCI controller does not support I/O ports, so remove
the ports range. Also correct the beginning of the memory range and its
size.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42503
John Crispin [Fri, 12 Sep 2014 06:53:09 +0000 (06:53 +0000)]
atheros: ar2315-pci: rework the configuration access code
Use __raw_{read,write}l accessors and use Abort interrupt to detect a
configuration space read/write errors. The second change improves errors
detection, what improves the device presence detection and helps us to
avoid following (and similar) errors:
pci 0000:00:00.2: ignoring class 0x7e0200 (doesn't match header type 02)
pci 0000:00:00.2: bridge configuration invalid ([bus 03-90]), reconfiguring
pci 0000:00:00.2: not setting up bridge for bus 0000:01
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42502
John Crispin [Fri, 12 Sep 2014 06:53:00 +0000 (06:53 +0000)]
atheros: ar2315-pci: rework interrupt handling
Add PCI IRQ controller to facilitate interrupt handling, move interrupts
initialization to the IRQ controller initialization from
pcibios_plat_dev_init() callback.
Also remove odd PCI dev configuration manipulation from pcibios_plat_dev_init()
callback.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42501
John Crispin [Fri, 12 Sep 2014 06:52:55 +0000 (06:52 +0000)]
atheros: ar2315-pci: rework host controller initialization
Explicitly configure PCI host controller, and do not expose it to PCI
subsystem. The PCI host controller acts as a usual PCI device connected
to the bus, but its configuration as a usual PCI device is senseless,
since the host controller provide access to _internal_ memory space for
_external_ device.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42500
John Crispin [Fri, 12 Sep 2014 06:52:51 +0000 (06:52 +0000)]
atheros: ar2315-pci: cosmetic changes
- add comment, which briefly describes PCI controller features and
Fonera 2.0g schematics.
- rename several functions and structures, to make it clear that this
code only for AR2315 chips.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42499
John Crispin [Fri, 12 Sep 2014 06:52:46 +0000 (06:52 +0000)]
atheros: ar2315-pci: remove odd locking in PCI config space access function
Caller (generic PCI code) already do proper locking so no need to add
another one here.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42498
John Crispin [Fri, 12 Sep 2014 06:52:42 +0000 (06:52 +0000)]
atheros: remove odd ATHEROS_AR2315 config symbol dependencies
Remove options which already selected by ATHEROS_AR231X on which
ATHEROS_AR2315 depends.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42497
John Crispin [Fri, 12 Sep 2014 06:52:36 +0000 (06:52 +0000)]
atheros: various space related changes
- remove odd blank lines
- remove odd spaces after casts
- fix alignment
No functional changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42496
John Crispin [Fri, 12 Sep 2014 06:52:26 +0000 (06:52 +0000)]
atheros: rework and cleanup board initialization
- remove odd flags and branching
- add __init mark
- make shorter variables names
- returns true or false from boolean functions
- unwrap short function declarations
- unwrap quoted string
- rename macroses with names in CamelCase
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42495
John Crispin [Fri, 12 Sep 2014 06:52:21 +0000 (06:52 +0000)]
atheros: update ether addresses handling
- use ether_foo() routines to work with addresses
- use ETH_ALEN inplace of magic '6'
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42494
John Crispin [Fri, 12 Sep 2014 06:52:14 +0000 (06:52 +0000)]
atheros: remove useless includes
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42493
John Crispin [Fri, 12 Sep 2014 06:52:07 +0000 (06:52 +0000)]
atheros: ar231x-eth: remove useless IOCTL handlers
These IOCTLs handled in the core now.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42492
John Crispin [Fri, 12 Sep 2014 06:52:00 +0000 (06:52 +0000)]
atheros: ar2315-spiflash: use mutex inplace of spinlock
Use mutex inplace of spinlock to make code simple, also call
mutex_{lock,unlock} explicitly to avoid sparse warning about context
imbalance.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42491
John Crispin [Fri, 12 Sep 2014 06:51:51 +0000 (06:51 +0000)]
atheros: ar2315-spiflash: update initialization
- fill module metadata
- remove odd module_{init,exit}
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42490
John Crispin [Fri, 12 Sep 2014 06:51:46 +0000 (06:51 +0000)]
atheros: ar2315-spiflash: use devm_* API to simplify the code
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42489
John Crispin [Fri, 12 Sep 2014 06:51:39 +0000 (06:51 +0000)]
atheros: remove useless return
Remove useless void function return.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42488
John Crispin [Fri, 12 Sep 2014 06:51:33 +0000 (06:51 +0000)]
atheros: remove FSF mailing address
Remove FSF mailing address as suggested by checkpach and place license
URL.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42487
John Crispin [Fri, 12 Sep 2014 06:51:26 +0000 (06:51 +0000)]
atheros: add blank line after declarations
as suggested by checkpach.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42486
John Crispin [Fri, 12 Sep 2014 06:51:10 +0000 (06:51 +0000)]
atheros: use static keywork for local code
Make PCI IRQ handler and several structures static as suggested by
sparse.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42485
John Crispin [Fri, 12 Sep 2014 06:51:05 +0000 (06:51 +0000)]
atheros: use NULL instead of plain integer
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42484
John Crispin [Fri, 12 Sep 2014 06:50:58 +0000 (06:50 +0000)]
atheros: add missing include
Missing this headers cause several sparse "symbol 'foo' was not
declared. Should it be static?" warnings.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42483
John Crispin [Fri, 12 Sep 2014 06:50:53 +0000 (06:50 +0000)]
atheros: avoid extern prototypes
Avoid using of extern prototypes as suggested by checkpatch.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 42482
John Crispin [Fri, 12 Sep 2014 06:50:46 +0000 (06:50 +0000)]
ralink: drop 3.10 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42481
Felix Fietkau [Thu, 11 Sep 2014 23:13:29 +0000 (23:13 +0000)]
tools: install a fake empty ldconfig script to prevent the system ldconfig from messing around with the toolchain (fixes disappearing musl symlink issue)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42480
Felix Fietkau [Thu, 11 Sep 2014 23:13:24 +0000 (23:13 +0000)]
qos-scripts: disable fq_codel ecn by default to improve compatibility
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42479
John Crispin [Thu, 11 Sep 2014 18:22:31 +0000 (18:22 +0000)]
lantiq: update to a newer versions of the vr9 drivers
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42478
John Crispin [Thu, 11 Sep 2014 17:50:03 +0000 (17:50 +0000)]
ltq-deu: fix compile for 3.14
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42477
John Crispin [Thu, 11 Sep 2014 17:49:57 +0000 (17:49 +0000)]
lantiq: update 3.14 patches
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42476
John Crispin [Thu, 11 Sep 2014 12:28:22 +0000 (12:28 +0000)]
lldp: remove calls to user/group_add/exists
use the new ipkg based mechanism
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42472
John Crispin [Thu, 11 Sep 2014 12:28:00 +0000 (12:28 +0000)]
procd: update to latest git
add support for starting services as !root
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42471
John Crispin [Thu, 11 Sep 2014 12:27:49 +0000 (12:27 +0000)]
ipkg: add a default postinst/prerm script
the postinst script enables/starts the init.d scripts upon package installation
and installs the users required by the package.
the prerm script stops and disables the init.d scripts.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42470
John Crispin [Thu, 11 Sep 2014 12:27:26 +0000 (12:27 +0000)]
include: add a meta data field for required system user:group
this is in preparation of having services run as !root with
ACL'ed access to ubus.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42469
John Crispin [Thu, 11 Sep 2014 12:27:09 +0000 (12:27 +0000)]
opkg: indicate upgrade vs install
when running the postinst trigger we set PKG_UPGRADE=1 if this is an upgrade
and not an install.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42468
John Crispin [Thu, 11 Sep 2014 12:26:52 +0000 (12:26 +0000)]
umbim: remove superflous jshn call
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42467
John Crispin [Thu, 11 Sep 2014 12:26:41 +0000 (12:26 +0000)]
umbim: update to latest git
adds handling for username/password
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42466
John Crispin [Thu, 11 Sep 2014 12:26:31 +0000 (12:26 +0000)]
comgt: add directip proto
add a proto handler for sierra wireless directip modems
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42465
Luka Perkov [Wed, 10 Sep 2014 23:15:22 +0000 (23:15 +0000)]
config: enable cgroup freezer
This option will be enabled by default only when cgroups support is enabled.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42464
Luka Perkov [Wed, 10 Sep 2014 21:40:19 +0000 (21:40 +0000)]
kernel: update 3.14 to 3.14.18
Targets were build tested and patches are refreshed.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42463
Luka Perkov [Wed, 10 Sep 2014 13:57:48 +0000 (13:57 +0000)]
kernel: remove unused versions
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42462
Felix Fietkau [Wed, 10 Sep 2014 13:50:10 +0000 (13:50 +0000)]
atheros: enable the low_mem flag to better deal with 16M RAM devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42460
Felix Fietkau [Wed, 10 Sep 2014 13:01:53 +0000 (13:01 +0000)]
hostapd: add ubus bindings for wps
With this patch WPS discovery can be started or canceled over ubus if
WPS is enabled in wireless configuration. This is equivalent of
'hostapd_cli wps_pbc' and 'hostapd_cli wps_cancel' commands.
Signed-off-by: Petar Koretic <petar.koretic@sartura.hr>
SVN-Revision: 42459
Felix Fietkau [Wed, 10 Sep 2014 12:56:24 +0000 (12:56 +0000)]
ar71xx: ack completed tx descriptors only after the full frame has been completed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42457
Felix Fietkau [Wed, 10 Sep 2014 12:56:19 +0000 (12:56 +0000)]
procd: allow adding empty strings to arrays
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42456
Luka Perkov [Tue, 9 Sep 2014 21:15:49 +0000 (21:15 +0000)]
imx6: fix image build for Generic profile.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42455
Felix Fietkau [Tue, 9 Sep 2014 08:03:00 +0000 (08:03 +0000)]
ath9k: fix pll clock initialization on newer soc devices (fixes #14916)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42453
Hauke Mehrtens [Mon, 8 Sep 2014 19:55:36 +0000 (19:55 +0000)]
kernel: drop 3.9 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42452
Hauke Mehrtens [Mon, 8 Sep 2014 19:55:00 +0000 (19:55 +0000)]
gemini: drop kernel 3.9 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42451
Hauke Mehrtens [Mon, 8 Sep 2014 19:54:22 +0000 (19:54 +0000)]
gemini: switch to kernel 3.10
This switches to kernel 3.10 that was prepared by Hauke in r41531 :
gemini: add support for kernel 3.10
This is compile tested only, please run test and report back.
I've simply checked if it still compiles, unfortunately we didn't get
any feedback for this target.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42450
Hauke Mehrtens [Mon, 8 Sep 2014 19:53:01 +0000 (19:53 +0000)]
omap: add kernel 3.14 support
It has been compile-tested only so far. Please give it a try.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42449
Hauke Mehrtens [Mon, 8 Sep 2014 19:50:53 +0000 (19:50 +0000)]
kernel: add bcma patches sent upstream but not pushed yet
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42448
Hauke Mehrtens [Mon, 8 Sep 2014 19:50:11 +0000 (19:50 +0000)]
kernel: update bcma to the version from wireless-testing master-2014-09-04 tag
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42447
projects / openwrt / staging / blogic.git / log