Leo Kim [Tue, 13 Oct 2015 11:02:09 +0000 (20:02 +0900)]
staging: wilc1000: rename au8IPAddr of struct set_ip_addr
This patch renames au8IPAddr of struct set_ip_addr to ip_addr to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 11:02:08 +0000 (20:02 +0900)]
staging: wilc1000: rename u32Timeout of struct power_mgmt_param
This patch renames u32Timeout of struct power_mgmt_param to timeout to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 11:02:07 +0000 (20:02 +0900)]
staging: wilc1000: rename bIsEnabled of struct power_mgmt_param
This patch renames bIsEnabled of struct power_mgmt_param to enabled to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 11:02:06 +0000 (20:02 +0900)]
staging: wilc1000: rename au8MacAddr of struct del_sta
This patch renames au8MacAddr of struct del_sta to mac_addr to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 11:02:05 +0000 (20:02 +0900)]
staging: wilc1000: rename u32count of struct set_multicast
This patch renames u32count of struct set_multicast to cnt to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 11:02:04 +0000 (20:02 +0900)]
staging: wilc1000: rename bIsEnabled of struct set_multicast
This patch renames bIsEnabled of struct set_multicast to enabled to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:50:10 +0000 (19:50 +0900)]
staging: wilc1000: rename u8Num_AssocSta of struct del_all_sta
This patch renames u8Num_AssocSta of struct del_all_sta to assoc_sta to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:50:09 +0000 (19:50 +0900)]
staging: wilc1000: rename au8Sta_DelAllSta of struct del_all_sta
This patch renames au8Sta_DelAllSta of struct del_all_sta to del_all_sta to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:50:08 +0000 (19:50 +0900)]
staging: wilc1000: rename pu8Tail of struct beacon_attr
This patch renames pu8Tail of struct beacon_attr to tail to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:50:07 +0000 (19:50 +0900)]
staging: wilc1000: rename u32TailLen of struct beacon_attr
This patch renames u32TailLen of struct beacon_attr to tail_len to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:50:06 +0000 (19:50 +0900)]
staging: wilc1000: rename pu8Head of struct beacon_attr
This patch renames pu8Head of struct beacon_attr to head to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:50:05 +0000 (19:50 +0900)]
staging: wilc1000: rename u32HeadLen of struct beacon_attr
This patch renames u32HeadLen of struct beacon_attr to head_len to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:50:04 +0000 (19:50 +0900)]
staging: wilc1000: rename u32DTIMPeriod of struct beacon_attr
This patch renames u32DTIMPeriod of struct beacon_attr to dtim_period to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:50:03 +0000 (19:50 +0900)]
staging: wilc1000: rename u32Interval of struct beacon_attr
This patch renames u32Interval of struct beacon_attr to interval to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:50:02 +0000 (19:50 +0900)]
staging: wilc1000: rename u8SetChan of struct channel_attr
This patch renames u8SetChan of struct channel_attr to set_ch to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:50:01 +0000 (19:50 +0900)]
staging: wilc1000: rename u32Length of struct rcvd_async_info
This patch renames u32Length of struct rcvd_async_info to len to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:50:00 +0000 (19:50 +0900)]
staging: wilc1000: rename pu8Buffer of struct rcvd_async_info
This patch renames pu8Buffer of struct rcvd_async_info to buffer to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:59 +0000 (19:49 +0900)]
staging: wilc1000: rename pJoinParams of struct connect_attr
This patch renames pJoinParams of struct connect_attr to params to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:58 +0000 (19:49 +0900)]
staging: wilc1000: rename u8channel of struct connect_attr
This patch renames u8channel of struct connect_attr to ch to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:57 +0000 (19:49 +0900)]
staging: wilc1000: rename tenuAuth_type of struct connect_attr
This patch renames tenuAuth_type of struct connect_attr to auth_type to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:56 +0000 (19:49 +0900)]
staging: wilc1000: rename pvUserArg of struct connect_attr
This patch renames pvUserArg of struct connect_attr to arg to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:55 +0000 (19:49 +0900)]
staging: wilc1000: rename pfConnectResult of struct connect_attr
This patch renames pfConnectResult of struct connect_attr to result to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:54 +0000 (19:49 +0900)]
staging: wilc1000: rename u8security of struct connect_attr
This patch renames u8security of struct connect_attr to security to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:53 +0000 (19:49 +0900)]
staging: wilc1000: rename IEsLen of struct connect_attr
This patch renames IEsLen of struct connect_attr to ies_len to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:52 +0000 (19:49 +0900)]
staging: wilc1000: rename pu8IEs of struct connect_attr
This patch renames pu8IEs of struct connect_attr to ies to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:51 +0000 (19:49 +0900)]
staging: wilc1000: rename ssidLen of struct connect_attr
This patch renames ssidLen of struct connect_attr to ssid_len to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:50 +0000 (19:49 +0900)]
staging: wilc1000: rename pu8ssid of struct connect_attr
This patch renames pu8ssid of struct connect_attr to ssid to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:49 +0000 (19:49 +0900)]
staging: wilc1000: rename pu8bssid of struct connect_attr
This patch renames pu8bssid of struct connect_attr to bssid to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:48 +0000 (19:49 +0900)]
staging: wilc1000: remove duplicate copy routine
This patch remove the duplicate bssid copy routine.
Already ahead bssid copy routine execute.
Therefore do not necessary in this routine.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:47 +0000 (19:49 +0900)]
staging: wilc1000: fix "ERROR: do not initialise globals to 0 or NULL"
This patch fixes the checkpatch.pl error to host_interface.c.
- ERROR: do not initialise globals to 0 or NULL
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:46 +0000 (19:49 +0900)]
staging: wilc1000: rename strHiddenNetwork of struct scan_attr
This patch renames strHiddenNetwork of struct scan_attr to hidden_network to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:45 +0000 (19:49 +0900)]
staging: wilc1000: rename pvUserArg of struct scan_attr
This patch renames pvUserArg of struct scan_attr to arg to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:44 +0000 (19:49 +0900)]
staging: wilc1000: rename pfScanResult of struct scan_attr
This patch renames pfScanResult of struct scan_attr to result to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:43 +0000 (19:49 +0900)]
staging: wilc1000: rename IEsLen of struct scan_attr
This patch renames IEsLen of struct scan_attr to ies_len to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:42 +0000 (19:49 +0900)]
staging: wilc1000: rename pu8IEs of struct scan_attr
This patch renames pu8IEs of struct scan_attr to ies to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:41 +0000 (19:49 +0900)]
staging: wilc1000: rename u8ChnlListLen of struct scan_attr
This patch renames u8ChnlListLen of struct scan_attr to ch_list_len to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:40 +0000 (19:49 +0900)]
staging: wilc1000: rename pu8ChnlFreqList of struct scan_attr
This patch renames pu8ChnlFreqList of struct scan_attr to ch_freq_list to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:39 +0000 (19:49 +0900)]
staging: wilc1000: remove duplicate null check routine
This patch removes the duplicate null check routine. The same null check
routine is twice executed. Therefore the duplicated routine is not necessary.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:38 +0000 (19:49 +0900)]
staging: wilc1000: rename u8ScanType of struct scan_attr
This patch renames u8ScanType of struct scan_attr to type to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:37 +0000 (19:49 +0900)]
staging: wilc1000: rename u8ScanSource of struct scan_attr
This patch renames u8ScanSource of struct scan_attr to src to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:36 +0000 (19:49 +0900)]
staging: wilc1000: rename u8Ciphermode of struct host_if_wpa_attr
This patch renames u8Ciphermode of struct host_if_wpa_attr to mode to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:35 +0000 (19:49 +0900)]
staging: wilc1000: rename u8Keylen of struct host_if_wpa_attr
This patch renames u8Keylen of struct host_if_wpa_attr to key_len to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:34 +0000 (19:49 +0900)]
staging: wilc1000: rename u8keyidx of struct host_if_wpa_attr
This patch renames u8keyidx of struct host_if_wpa_attr to index to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:33 +0000 (19:49 +0900)]
staging: wilc1000: rename u8seqlen of struct host_if_wpa_attr
This patch renames u8seqlen of struct host_if_wpa_attr to seq_len to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:32 +0000 (19:49 +0900)]
staging: wilc1000: rename pu8seq of struct host_if_wpa_attr
This patch renames pu8seq of struct host_if_wpa_attr to seq to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:31 +0000 (19:49 +0900)]
staging: wilc1000: rename pu8macaddr of struct host_if_wpa_attr
This patch renames pu8macaddr of struct host_if_wpa_attr to mac_addr to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:30 +0000 (19:49 +0900)]
staging: wilc1000: rename pu8key of struct host_if_wpa_attr
This patch renames pu8key of struct host_if_wpa_attr to key to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:29 +0000 (19:49 +0900)]
staging: wilc1000: rename uniHostIFkeyAttr of struct key_attr
This patch renames uniHostIFkeyAttr of struct key_attr to attr to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:28 +0000 (19:49 +0900)]
staging: wilc1000: rename u8KeyAction of struct key_attr
This patch renames u8KeyAction of struct key_attr to action to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:27 +0000 (19:49 +0900)]
staging: wilc1000: rename enuKeyType of struct key_attr
This patch renames enuKeyType of struct key_attr to type to
avoid CamelCase naming convention.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 13 Oct 2015 10:49:26 +0000 (19:49 +0900)]
staging: wilc1000: host_interface.c : remove over-commenting
There are over-commenting in the host_interface.c file and most of them
are not helpful to explain what the code does and generate 80 ending
line over warnings. So, all of comments are removed in this patch and the
comments will later be added if necessary with the preferred Linux style.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shivani Bhardwaj [Tue, 13 Oct 2015 15:20:23 +0000 (20:50 +0530)]
Staging: unisys: visorinput: Remove unused code
Remove the code which is not used anywhere in the program.
Semantic patch used:
@@
type T;
identifier i;
constant C;
position p != e.p;
@@
- T i@p;
<+... when != i
- i = C;
...+>
Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Tue, 13 Oct 2015 15:37:23 +0000 (11:37 -0400)]
staging: unisys: vmcallinterface.h: convert pragma to __packed
Convert from pragma to __packed
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 9 Oct 2015 18:53:49 +0000 (11:53 -0700)]
staging: comedi: adq12b: usleep_range is preferred over udelay
Fix checkpatch.pl issue:
CHECK: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.txt
Replace the udelay() with usleep_range() with a reasonable upper limit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 9 Oct 2015 18:53:48 +0000 (11:53 -0700)]
staging: comedi: adq12b: prefer using the BIT macro
As suggested by checkpatch.pl, use the BIT macro to define the
register bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 9 Oct 2015 18:53:47 +0000 (11:53 -0700)]
staging: comedi: adq12b: tidy up multi-line comments
Reformat the multi-line comments in the kernel CodingStyle. And
refactor them to follow the normal format for comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:48:29 +0000 (10:48 -0700)]
staging: comedi: dt3000: update the MODULE_DESCRIPTION
Change the MODULE_DESCRIPTION to something more ueeful than the
generic "Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:48:28 +0000 (10:48 -0700)]
staging: comedi: dt3000: remove #if 0'ed out code
Replace the disabled code in dt3k_dio_config() with a comment in case
it's actually needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:48:27 +0000 (10:48 -0700)]
staging: comedi: dt3000: tidy up memory subdevice init
Remove the unnecessary 'len_chanlist' initialization. This member is
only used by subdevices that support async commands.
For aesthetics, reorder the initialization a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:48:26 +0000 (10:48 -0700)]
staging: comedi: dt3000: tidy up digital i/o subdevice init
Remove the unnecessary 'len_chanlist' initialization. This member is
only used by subdevices that support async commands.
For aesthetics, reorder the initialization a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:48:25 +0000 (10:48 -0700)]
staging: comedi: dt3000: rename dt3k_ai_insn()
For aesthetics, rename this subdevice (*insn_read) function to follow
the normal naming in comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:48:24 +0000 (10:48 -0700)]
staging: comedi: dt3000: the dt3002 board does not have analog outputs
According to the boardinfo, the dt3002 board does not have analog outputs.
The rest of the board have two 12-bit analog output channels.
Replace the 'dachan' and 'dabits' members of the boardinfo with a bit-
field flag 'has_ao'. Use the new member to conditionally initialize
the analog output subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:48:23 +0000 (10:48 -0700)]
staging: comedi: dt3000: refactor 'adbits' boardinfo
All the board supported by this driver have analog inputs. The input
resolution is either 12-bit or 16-bit.
Replace the 'adbits' member of the boardinfo with a bit-field flag
'ai_is_16bits' and just set if for the 16-bit boards.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:48:22 +0000 (10:48 -0700)]
staging: comedi: dt3000: remove proc subdevice
This subdevice is not allocated or defined in the driver. Remove the
disabled subdevice initialization.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:48:21 +0000 (10:48 -0700)]
staging: comedi: dt3000: tidy up remaining defines
Move the remaining defines and prefix them with 'DPR_' for consistency.
Define a macro to set the analog input trigger bits to fix the
checkpatch.pl issues about:
CHECK: spaces preferred around that '<<' (ctx:VxV)
CHECK: Prefer using the BIT macro
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:48:20 +0000 (10:48 -0700)]
staging: comedi: dt3000: rename the interrupt flag defines
For aesthetics, rename these defines so they have association
with the register. Move them closer to the register define and
use the BIT macro to define them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:48:19 +0000 (10:48 -0700)]
staging: comedi: dt3000: rename the SUBS_* defines
For aesthetics, rename these defines to avoid any confusion with the
similar comedi defines. Move them closer to the register they are
associated with.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:48:18 +0000 (10:48 -0700)]
staging: comedi: dt3000: tidy up the command mailbox defines
For aesthetics, rename these defines so they are associated with
the register. Move the defines closer to the register define.
Define some macros for the "completion" and "cmd" bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:48:17 +0000 (10:48 -0700)]
staging: comedi: dt3000: rename dual-ported RAM location defines
Rename these CamelCase defines and fix the checkpatch.pl issues:
CHECK: Avoid CamelCase: <DPR_{various}>
CHECK: spaces preferred around that '*' (ctx:VxV)
CHECK: spaces preferred around that '+' (ctx:VxV)
For aesthetics, move the defines to after the includes.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:48:16 +0000 (10:48 -0700)]
staging: comedi: dt3000: tidy up multi-line comments
Reformat the multi-line comments in the kernel CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 9 Oct 2015 18:09:35 +0000 (11:09 -0700)]
staging: comedi: adl_pci9118: rename Compute_and_setup_dma()
Rename this CamelCase function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 9 Oct 2015 18:09:34 +0000 (11:09 -0700)]
staging: comedi: adl_pci9118: prefer using the BIT macro
As suggested by checkpatch.pl, use the BIT macro to define the
register bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 9 Oct 2015 17:47:45 +0000 (10:47 -0700)]
staging: comedi: addi_apci_2032: document the spinlock_t definition
Add some comments to the private data tp quiet the checkpatch.pl
issue about:
CHECK: spinlock_t definition without comment
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 9 Oct 2015 17:47:44 +0000 (10:47 -0700)]
staging: comedi: addi_apci_2032: prefer using the BIT macro
As suggested by checkpatch.pl, use the BIT macro to define the
register bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:30:45 +0000 (10:30 -0700)]
staging: comedi: ii_pci20kc: update the MODULE_DESCRIPTION
Change the MODULE_DESCRIPTION to something more useful than the
generic "Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:30:44 +0000 (10:30 -0700)]
staging: comedi: ii_pci20kc: use comedi_offset_munge()
For aesthetics, use the helper function to handle the munging of the
analog output data from offset binary to 2's complement and the analog
input data from 2's complement to offset binary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Oct 2015 17:30:43 +0000 (10:30 -0700)]
staging: comedi: ii_pci20kc: prefer using the BIT macro
As suggested by checkpatch.pl, use the BIT macro to define the
register bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 22:58:44 +0000 (15:58 -0700)]
staging: comedi: dt9812: reword comments to fix checkpatch.pl issues
Reword the block comments to fix the checkpatch.pl issues about:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
For consistency, also reword the previous comments.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 22:58:43 +0000 (15:58 -0700)]
staging: comedi: dt9812: rename F020_MASK_DACxCN_DACxEN
Rename this CamelCase define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 22:58:42 +0000 (15:58 -0700)]
staging: comedi: dt9812: tidy up multi-line comment
Reformat the multi-line comment in the kernel CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:49 +0000 (14:52 -0700)]
staging: comedi: icp_multi: update the MODULE_DESCRIPTION
Change the MODULE_DESCRIPTION to something more useful than the
generic "Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:48 +0000 (14:52 -0700)]
staging: comedi: icp_multi: remove board reset during (*detach)
The icp_multi_reset() function currnelt does the following during the
(*auto_attach) and (*detach) of this driver:
1) disables all interrupts and clears any pending requests
2) resets the analog output channels to 0V (0..5V range)
3) sets all digital output channels to 0
Interrupts are not used by this driver so the disable/clear when
detaching is not necessary.
Depending on the use, reseting the analog and digital outputs when the
driver is detached might not be desireable.
Remove the board reset during the (*detach) and use comedi_pci_detach()
directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:47 +0000 (14:52 -0700)]
staging: comedi: icp_multi: tidy up subdevice init
For aesthetics, add some whitespace to the subdevice initialization.
Remove the unnecessary initialization of the 'len_chanlist' for each
subdevice. That member is only used by subdevices that support async
commands.
Also, remove the initialzation of the dev->read_subdev. That member
is also only used for async command support.
Rename some of the subdevice functions to follow the normal format
used in comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:46 +0000 (14:52 -0700)]
staging: comedi: icp_multi: remove counter subdevice
The support functions for this subdevice are not complete. Since the
counter is the last subdevice just remove it and it's allocation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:45 +0000 (14:52 -0700)]
staging: comedi: icp_multi: fix clock comment CodingStyle
Reword the block comment to fix a CodingStyle issue.
For aesthetics, also rename the icp_multi_ao_eoc() function. It's testing
for the analog output to be 'ready' not for an 'end-of-conversion'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:44 +0000 (14:52 -0700)]
staging: comedi: icp_multi: remove private data member 'DacCmdStatus'
This private data member isn't really needed. The two functions
that use it, icp_multi_ao_insn_write() and icp_multi_reset(), mask
any previous value before setting the bits. The masking just clears
the variable.
Refactor the code to not use the private data member. This also
removes the need for the private data so remove it's allocation
during the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:43 +0000 (14:52 -0700)]
staging: comedi: icp_multi: remove check_channel_list()
This function would only be needed in the driver supported async
commands. It's #if 0'ed out anyway so just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:42 +0000 (14:52 -0700)]
staging: comedi: icp_multi: remove useless interrupt disable code
This driver does not use interrupts and all the interrupt source are
disabled by icp_multi_reset() when the board is first attached.
Remove the unnecessary, and useless, disable and clearing of interrupts
in the analog input and output (*insn_read) and (*insn_write) functions.
This also removes the need for the private data members 'IntEnable' and
'IntStatus'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:41 +0000 (14:52 -0700)]
staging: comedi: icp_multi: remove interrupt support
The interrupt handler in this driver doesn't do anything other than
read the interrupt status register. Since I can't locate a datasheet
for the board, remove the useless interrupt support code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:40 +0000 (14:52 -0700)]
staging: comedi: icp_multi: absorb setup_channel_list()
This function is only called in one place and the 'n_chan' parameter
is always 1. This makes the for() loop a bit silly.
Absorb the function into the caller and simplify the code. This also
removes the need for the private data member 'AdcCmdStatus'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:39 +0000 (14:52 -0700)]
staging: comedi: icp_multi: remove unused members from private data
These members are either not used at all or they are set but never
used. Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:38 +0000 (14:52 -0700)]
staging: comedi: icp_multi: remove unnecessary block comment
This comment doesn't add any value to the code. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:37 +0000 (14:52 -0700)]
staging: comedi: icp_multi: rename static variable 'range_analog'
For aesthetics, rename this static variable so it has namespace
associated with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:36 +0000 (14:52 -0700)]
staging: comedi: icp_multi: tidy up the interrupt enable/status register bits
For aesthetics, rename these bit defines so they are associated with
the registers and use the BIT macro to define them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:35 +0000 (14:52 -0700)]
staging: comedi: icp_multi: tidy up the DAC command/status register bits
For aesthetics, rename these bit defines so they are associated with
the register and use the BIT macro to define them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:34 +0000 (14:52 -0700)]
staging: comedi: icp_multi: tidy up the ADC command/status register bits
For aesthetics, rename these bit defines so they are associated with
the register and use the BIT macro to define them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 21:52:33 +0000 (14:52 -0700)]
staging: comedi: icp_multi: tidy up multi-line comments
Reformat the multi-line comments in the kernel CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 00:23:44 +0000 (17:23 -0700)]
staging: comedi: me_daq: fix me_ai_insn_read()
The comedi core expects (*insn_read) functions to return insn->n data
values. Refactor the function to work like the core expects. For
aesthetics, use the comedi_offset_munge() helper to munge the 2's
complement data.
This also fixes a minor issue when comedi_timeout() times out. Currently
this function just returns which leaves the ADC mode programmed for
software triggering. With the refactor the ADC mode is always disabled
when the function exits. This allows removing the unnecessary steps to
"stop any running conversions" at the start of the function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 00:23:43 +0000 (17:23 -0700)]
staging: comedi: me_daq: allow differential analog inputs
The ai (*insn_read) allows differential analog inputs but the subdevice
initialization is missing the SDF_DIFF subdev_flag to allow the user to
select this mode. Fix the subdevice init.
According to the manual, differential operation only works with the
first 8 channels and bipolar ranges. Add a check to the (*insn_read) to
ensure this.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 7 Oct 2015 00:23:42 +0000 (17:23 -0700)]
staging: comedi: me_daq: tidy up counter registers
For aesthetics, convert the counter registers into macros that take
the counter channel and return the correct register offset.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / openwrt / staging / blogic.git / log