git.openwrt.org Git - openwrt/staging/wigyori.git/log

Create $(1)/etc/uci-defaults directory during installation. Thanks Yuji Mano. - Fixes the use of CONFIG_UCI_PRECONFIG under git; git does not track empty directories.

SVN-Revision: 11517

commit | commitdiff | tree

Yuji Mano [Mon, 16 Jun 2008 23:17:44 +0000 (23:17 +0000)]

set file executable permissions

SVN-Revision: 11516

commit | commitdiff | tree

Felix Fietkau [Mon, 16 Jun 2008 21:57:57 +0000 (21:57 +0000)]

use file descriptors 8 and 9 for build system internal log messages, as apparently bash does not like fds greater than 9 in shell commands on some systems

SVN-Revision: 11515

commit | commitdiff | tree

Yuji Mano [Mon, 16 Jun 2008 19:48:54 +0000 (19:48 +0000)]

Add the PS3 specific utility bl-option, a helper sctipt to get and set bootloader options in flash memory.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
SVN-Revision: 11514

commit | commitdiff | tree

Yuji Mano [Mon, 16 Jun 2008 19:37:00 +0000 (19:37 +0000)]

Revert previous bad commit r11512

SVN-Revision: 11513

commit | commitdiff | tree

Yuji Mano [Mon, 16 Jun 2008 19:14:13 +0000 (19:14 +0000)]

Add the PS3 specific utility bl-option, a helper sctipt to get and set bootloader options in flash memory.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
SVN-Revision: 11512

commit | commitdiff | tree

Yuji Mano [Mon, 16 Jun 2008 19:06:21 +0000 (19:06 +0000)]

Add a system config option to allow syslogd to log to a file.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
SVN-Revision: 11511

commit | commitdiff | tree

Peter Denison [Mon, 16 Jun 2008 19:06:14 +0000 (19:06 +0000)]

Fix TG3 build. Thanks Hauke Mehrtens

SVN-Revision: 11510

commit | commitdiff | tree

Yuji Mano [Mon, 16 Jun 2008 19:04:07 +0000 (19:04 +0000)]

Update the PS3 target README with some installation tips, and the PS3 image Makefile to create openwrt-ps3-vmlinux.elf.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
SVN-Revision: 11509

commit | commitdiff | tree

Florian Fainelli [Mon, 16 Jun 2008 13:25:14 +0000 (13:25 +0000)]

his patch mainly fixes the huge delay when we ping from the RDC device to another host (160-230 ms). r6040_rx() was rewritten. Further changes: - fix a bug in hex2str(), which overwrote the source with a zero - removed rx_free_desc counter; allocate skb inside r6040_rx() on the fly - r6040_rx: don't take the error from the MLSR register (may be too late) but from the descriptor (we may have to allow these errors (via MCR0) there - r6040_alloc_rxbufs() may fail due to lack of skb, added a return value - changed some debugs - more defines - version: 0.18 -> 0.19

Signed-Off by Joerg Albert <jal2@gmx.de>

SVN-Revision: 11508

commit | commitdiff | tree

Florian Fainelli [Mon, 16 Jun 2008 13:24:41 +0000 (13:24 +0000)]

This patch applies to the RDC 32xx ethernet driver (svn r10754, first patch applied) and fixes the following issues: - re-added the parent parameter to specify a netdevice to steal the MAC address from (optional). - fixed null pointer access in r6040_rx() (lp->dev init. was missing) - fixed "scheduling while atomic" endless loop if tx_timeout() was called (caused by the re-allocs of the buffers) - fixed tx timeouts (tx irq weren't re-enabled on rx irq)

It adds some defines and cleans the code a bit (IMHO).

Signed-Off by Joerg Albert <jal2@gmx.de>

SVN-Revision: 11507

commit | commitdiff | tree

Florian Fainelli [Mon, 16 Jun 2008 13:24:09 +0000 (13:24 +0000)]

Hi,

this is the first of three patches to fix the ethernet driver of RDC R32xx applied to svn r10754.

It adds debugs and make some procedures (r6040_*) global symbols in order to help with debugging kernel oops. Version is increased from 0.16 to 0.18 to avoid conflicts with the driver variant metioned in the X-WRT forum (call 0.17.3) Tested on a Sitecom WL-153.

Signed-Off-By: Joerg Albert <jal2@gmx.de>
SVN-Revision: 11506

commit | commitdiff | tree

Imre Kaloz [Mon, 16 Jun 2008 13:20:10 +0000 (13:20 +0000)]

backport mv643xx ethernet changes from the Marvell git repo

SVN-Revision: 11504

commit | commitdiff | tree

Imre Kaloz [Mon, 16 Jun 2008 13:18:58 +0000 (13:18 +0000)]

enable AMD flash support and physmap on orion

SVN-Revision: 11503

commit | commitdiff | tree

Gabor Juhos [Mon, 16 Jun 2008 13:17:52 +0000 (13:17 +0000)]

generic-2.6: oops, forgot to refresh the 2.6.25 IMQ patch

SVN-Revision: 11502

commit | commitdiff | tree

Gabor Juhos [Mon, 16 Jun 2008 12:57:56 +0000 (12:57 +0000)]

generic-2.6: even newer IMQ patch for 2.6.25 and 2.6.26

SVN-Revision: 11501

commit | commitdiff | tree

Imre Kaloz [Mon, 16 Jun 2008 12:43:16 +0000 (12:43 +0000)]

libnl: backport memleak fix

SVN-Revision: 11500

commit | commitdiff | tree

Imre Kaloz [Mon, 16 Jun 2008 12:42:36 +0000 (12:42 +0000)]

fix libnl compile with older kernels

SVN-Revision: 11499

commit | commitdiff | tree

Imre Kaloz [Mon, 16 Jun 2008 12:40:48 +0000 (12:40 +0000)]

refresh generic 2.6.22 patches

SVN-Revision: 11498

commit | commitdiff | tree

Imre Kaloz [Mon, 16 Jun 2008 12:38:55 +0000 (12:38 +0000)]

fixup machid workaround, generate uImage manually

SVN-Revision: 11497

commit | commitdiff | tree

Ralph Hempel [Mon, 16 Jun 2008 11:32:13 +0000 (11:32 +0000)]

added unsquashfs-lzma, usefull for debugging of existing fs images

SVN-Revision: 11496

commit | commitdiff | tree

Felix Fietkau [Sun, 15 Jun 2008 20:41:41 +0000 (20:41 +0000)]

fix the path to the x-wrt feed (svn:// is broken on berlios.de at the moment)

SVN-Revision: 11494

commit | commitdiff | tree

Felix Fietkau [Sun, 15 Jun 2008 14:50:41 +0000 (14:50 +0000)]

add another check to the dependencies

SVN-Revision: 11475

commit | commitdiff | tree

Felix Fietkau [Sun, 15 Jun 2008 14:49:00 +0000 (14:49 +0000)]

fix typo

SVN-Revision: 11474

commit | commitdiff | tree

Felix Fietkau [Sun, 15 Jun 2008 14:34:00 +0000 (14:34 +0000)]

add some sanity checking

SVN-Revision: 11473

commit | commitdiff | tree

Felix Fietkau [Sun, 15 Jun 2008 11:15:35 +0000 (11:15 +0000)]

remove some unused crap

SVN-Revision: 11472

commit | commitdiff | tree

Felix Fietkau [Sun, 15 Jun 2008 11:11:28 +0000 (11:11 +0000)]

(6/6) bcm57xx: package

This is the bcm57xx package.  I have tested default vlan functions,
but I dont have the equipment to test more advanced setups.  The default
vlan setup seems to be working fine.  I also added the activate_gpio
parameter which will make the driver activate the switch via gpio before
probing for it.

I'm not sure which method is best for autoload.  For the wrt350n, I
need the activate_gpio parameter.  But its probably not a good idea
to add that to the autoload file.  On a system without a bcm57xx switch,
isn't it a bad idea to mess with the gpios looking for the switch? Ideally,
wouldn't it be best to load the bcm57xx module from broadcom-diag, after
it has determined which router its on?  I tried using 'request_module' from
there, but had no success.  For now, I am relying on preinit to load
the bcm57xx module with activate_gpio param, after it has failed to load
switch_robo and switch_adm.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
SVN-Revision: 11471

commit | commitdiff | tree

Felix Fietkau [Sun, 15 Jun 2008 11:10:43 +0000 (11:10 +0000)]

(5/6) bcm57xx: bcm4785 incomplete reboot

I noticed my wrt350n would not reliably reboot after entering
the reboot command. I found this code in the source for the
wrt600n. It corrects the problem, and the wrt350n reboots
reliably now.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
SVN-Revision: 11470

commit | commitdiff | tree

Felix Fietkau [Sun, 15 Jun 2008 11:10:27 +0000 (11:10 +0000)]

(4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registered

This patch prevents switch-robo.c from attempting robo_probe on a port
that is already registered. robo_probe will adjust kernel reference counts
if it detects a switch on the port. If this patch wasn't applied, the
wrt350n would hang on reboot, waiting for the network driver reference count
to reach zero indefinitely.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
SVN-Revision: 11469

commit | commitdiff | tree

Felix Fietkau [Sun, 15 Jun 2008 11:10:13 +0000 (11:10 +0000)]

(3/6) bcm57xx: preinit

This patch allows the bcm57xx module to work correctly with failsafe mode.

insmod doesn't return an error when a module loads but doesn't detect a switch.
I added the check_module function to load the module, then make sure
it doesn't just exit immediately. This allows preinit to only attempt to
load the bcm57xx module when switch-robo and switch-adm dont detect a switch.

The activate_gpio parameter to bcm57xx simply instructs the module to attempt
to activate the switch via gpio before probing for the switch.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
SVN-Revision: 11468

commit | commitdiff | tree

Felix Fietkau [Sun, 15 Jun 2008 11:09:49 +0000 (11:09 +0000)]

(2/6) bcm57xx: netconfig

Update the netconfig script to support boardtype 0x478. I've tested this
on the wrt350n, hopefully it will match the 600n as well.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
SVN-Revision: 11467

commit | commitdiff | tree

Felix Fietkau [Sun, 15 Jun 2008 11:09:27 +0000 (11:09 +0000)]

(1/6) bcm57xx: init from diag

I've been working to finish up the bcm57xx module package nbd
posted a few months ago.  I am no expert, just had some spare
time and some motivation.  Here is the background:

https://dev.openwrt.org/ticket/2744

This first patch disables the bcm57xx gpio setup in broadcom-diag.
The switch needs to be initialized by the driver so the driver can
then reset the switch ASAP.  If the switch isn't reset quickly enough,
it will forward packets between the WAN and LAN, which will cause
problems with modems that only allow one mac to access the internet.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
SVN-Revision: 11466

commit | commitdiff | tree

Peter Denison [Fri, 13 Jun 2008 21:05:26 +0000 (21:05 +0000)]

Remove ssb headers from mac80211 to avoid conflict with in-kernel ones

SVN-Revision: 11462

Staging tree of Zoltan Herpai

RSS Atom