John Crispin [Mon, 9 Feb 2015 19:24:48 +0000 (19:24 +0000)]
realview: bump to 3.18
Signed-off-by: Your Name <blogic@openwrt.org>
SVN-Revision: 44368
Rafał Miłecki [Mon, 9 Feb 2015 18:43:05 +0000 (18:43 +0000)]
bcm53xx: fix loading SPROM content by bcma init change
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44367
John Crispin [Mon, 9 Feb 2015 18:15:30 +0000 (18:15 +0000)]
kernel: add missing symbol to realtek wifi
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44366
Steven Barth [Mon, 9 Feb 2015 15:26:35 +0000 (15:26 +0000)]
openssl: fix upstream regression for non-ec builds
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44364
John Crispin [Mon, 9 Feb 2015 14:24:00 +0000 (14:24 +0000)]
ixp4xx: add v3.18 support
Signed-off-by: Your Name <blogic@openwrt.org>
SVN-Revision: 44363
Jo-Philipp Wich [Mon, 9 Feb 2015 12:54:29 +0000 (12:54 +0000)]
rpcd: fix session.{login,list,destroy} method signatures
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44362
Steven Barth [Mon, 9 Feb 2015 12:44:32 +0000 (12:44 +0000)]
polarssl: bump to 1.3.10, work around rename to mbedtls
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44361
John Crispin [Mon, 9 Feb 2015 12:17:00 +0000 (12:17 +0000)]
ar71xx: dir-505: fix reset button gpio active_low value
Fix 'active_low' default value for the reset button on DIR-505.
Signed-off-by: Rocco Folino <rocco@devzen.net>
SVN-Revision: 44360
John Crispin [Mon, 9 Feb 2015 12:16:51 +0000 (12:16 +0000)]
ar71xx: Add support for MERCURY MAC1200R
This patch adds support for MERCURY MAC1200R, a dual band 802.11bgn + 802.11ac
router based on the AR9344, with QCA988x ath10k radio and 5 Fast Ethernet ports
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 44359
John Crispin [Mon, 9 Feb 2015 12:16:43 +0000 (12:16 +0000)]
ar71xx: fix nbg6716 power and usb led
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Marcin Mikolajczak <gr4ffy@gmail.com>
SVN-Revision: 44358
John Crispin [Mon, 9 Feb 2015 12:16:04 +0000 (12:16 +0000)]
oxnas: copy ubinized images to binary folder
Since r43778 ubinized images are stored inside KDIR. This makes sense
when using an uninized image to generate a factory image.
On oxnas ubinized images were used for sysupgrade before proper NAND
support was implemented in OpenWrt.
For users still on old builds before sysupgrade.tar was introduced,
ubinized image is thus the only option to conveniantly upgrade to a
more recent build.
Copy ubinized image also to BIN_DIR, so it will be easier for users
to find them.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44357
John Crispin [Mon, 9 Feb 2015 12:15:45 +0000 (12:15 +0000)]
ramips: Kingston MLW221 and MLWG2 cleanup
MLW221 dts use tabs NOT spaces.
MLWG2 dts typo and 1 tab not spaces
01_leds and diag.sh cleanup
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 44356
John Crispin [Mon, 9 Feb 2015 12:15:17 +0000 (12:15 +0000)]
ramips: fix mt76 radio pcie location definition for in Xiaomi MiWiFi Mini
This patch sets the correct location of the mt76 radio in the pcie bridge
(pcie-bridge instead of pcie0). Additionaly, it disables the 2.4 GHz band.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 44355
John Crispin [Mon, 9 Feb 2015 12:15:00 +0000 (12:15 +0000)]
ramips: Add mt76 node for Lenovo Y1 and Y1S.
Both Y1 and Y1S have MT7612E wireless chip so I submitted this patch.
Tested on Lenovo Y1.
Signed-off-by: 郭传鈜 <gch981213@gmail.com>
SVN-Revision: 44354
John Crispin [Mon, 9 Feb 2015 12:14:48 +0000 (12:14 +0000)]
lantiq: td-w8970: fix failsafe mode
Fix failsafe mode for TD-W8970, register interface for preinit.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 44353
John Crispin [Mon, 9 Feb 2015 12:14:32 +0000 (12:14 +0000)]
lantiq: td-w8970: fix reset button
For TP-LINK TD-W8970 button should work as "reset", not "BTN_1".
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 44352
John Crispin [Mon, 9 Feb 2015 12:14:22 +0000 (12:14 +0000)]
lantiq: fix typo in script
Fix typo in firmware installer script.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 44351
John Crispin [Mon, 9 Feb 2015 12:14:09 +0000 (12:14 +0000)]
octeon: switch to 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44350
John Crispin [Mon, 9 Feb 2015 12:13:55 +0000 (12:13 +0000)]
ralink: add 3.18 support
keep default as 3.14, mt7621 gic need to be ported to 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44349
John Crispin [Mon, 9 Feb 2015 12:13:25 +0000 (12:13 +0000)]
lantiq: add 3.18 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44348
John Crispin [Mon, 9 Feb 2015 12:12:52 +0000 (12:12 +0000)]
lantiq: fix dsl drivers for 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44346
John Crispin [Mon, 9 Feb 2015 12:12:39 +0000 (12:12 +0000)]
au1000: add 3.18 support
this is only compile tested
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44345
John Crispin [Mon, 9 Feb 2015 12:12:30 +0000 (12:12 +0000)]
ar7: add 3.18 support
this is only compile tested
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44344
John Crispin [Mon, 9 Feb 2015 12:12:09 +0000 (12:12 +0000)]
ar7-atm: make it compile under 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44343
John Crispin [Mon, 9 Feb 2015 12:11:34 +0000 (12:11 +0000)]
malta: drop 3.10 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44342
John Crispin [Mon, 9 Feb 2015 12:11:28 +0000 (12:11 +0000)]
malta: disable 64 builds as the userland has been broken for ages
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44341
John Crispin [Mon, 9 Feb 2015 12:11:19 +0000 (12:11 +0000)]
malta: add 3.18 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44340
John Crispin [Mon, 9 Feb 2015 12:10:46 +0000 (12:10 +0000)]
kernel: copy mips_decompressor_memmove patch to 3.18/3.19
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44339
John Crispin [Mon, 9 Feb 2015 12:10:18 +0000 (12:10 +0000)]
kernel: add missing symbols
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44338
John Crispin [Mon, 9 Feb 2015 12:10:07 +0000 (12:10 +0000)]
base-files: taint the build if the override mechanism is used
If some packages are overridden (using ./scripts/feeds -f), add a new
taint flag in /etc/openwrt_release. We'll use the CONFIG_OVERRIDE_PKGS
variable reported through the .config to detect it.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 44337
John Crispin [Mon, 9 Feb 2015 12:09:43 +0000 (12:09 +0000)]
build: propagate override information to .config file
With this change, override information is now parsed from the metadata
and put in the %packages hash. A new hash - %overrides - is created and
exported, to be used during the .config-package.in generation.
If an override is detected, a new option CONFIG_OVERRIDE_PKGS will be
created in the .config, and will contain a space-separated list of all
the overridden packages.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 44336
John Crispin [Mon, 9 Feb 2015 12:09:31 +0000 (12:09 +0000)]
build: propagate override information to .packageinfo
Packages overridden with "./scripts/feeds -f" will show up with an
"Override: <original-package-name>" in .packageinfo.
This will be useful to create a corresponding option in .config and
use this information during the build process.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 44335
John Crispin [Mon, 9 Feb 2015 12:09:23 +0000 (12:09 +0000)]
build: allow openwrt.git packages to be replaced by feeds
Currently, replacing a package available in openwrt.git requires
modifications in openwrt.git, or requires duplicating the package in a
feed but with a different name, which causes all kind of problems
related to dependencies (all packages selecting it would have to be
modified accordingly to select the new package).
With this change, if a package with the same name is present both in
feeds/ and package/ folders, the one in feeds/ can override the one
in package/, both in the menuconfig and during the build, by passing the
"-f" option to "./scripts/feeds install"
This mechanism is particularly useful for vendor tree, or in general for
application which needs to replace one particular package which exists
within openwrt.git by a custom/newer version.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 44334
John Crispin [Mon, 9 Feb 2015 12:09:17 +0000 (12:09 +0000)]
kernel: fix compile error inside adm6996.c
drivers/net/phy/adm6996.c:881:5: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'u32' [-Wformat=]
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44333
Steven Barth [Mon, 9 Feb 2015 12:04:00 +0000 (12:04 +0000)]
openssl: bump to 1.0.2
Fixes CVE-2014-3513, CVE-2014-3567, CVE-2014-3568, CVE-2014-3566
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44332
Steven Barth [Mon, 9 Feb 2015 08:30:06 +0000 (08:30 +0000)]
netifd: fix device config handling and add some config options
Thanks to Hans Dedecker
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44331
Jo-Philipp Wich [Sun, 8 Feb 2015 22:54:27 +0000 (22:54 +0000)]
sdk: use prepare target to initialize git snapshot
The new approach is less prone to race conditions and will properly
snapshot the symlinks prepared by the prereq-build target.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44330
Jo-Philipp Wich [Sun, 8 Feb 2015 22:54:19 +0000 (22:54 +0000)]
include: remove SDK specific target from toplevel.mk
Instead introduce a generic "make prepare" target which is executed if
include/prepare.mk exists.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44329
Jo-Philipp Wich [Sun, 8 Feb 2015 22:54:15 +0000 (22:54 +0000)]
include: cmake: prevent inclusion of rpath in binaries
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44328
Jo-Philipp Wich [Sun, 8 Feb 2015 22:20:38 +0000 (22:20 +0000)]
6in4: fix update timeout
The recent rework of the 6in4 endpoint update broke the retry mechanism.
Rework the timeout handling and make the update status more verbose.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44327
Luka Perkov [Sun, 8 Feb 2015 15:42:42 +0000 (15:42 +0000)]
ramips: fix patches after 3.14.32 bump
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44324
Nicolas Thill [Sun, 8 Feb 2015 15:34:20 +0000 (15:34 +0000)]
linux/generic: add missing config symbols
Related to debug/tracing, only added to 3.14+, might be needed for older versions as well
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44323
Nicolas Thill [Sun, 8 Feb 2015 15:34:13 +0000 (15:34 +0000)]
linux/sunxi: rename A20-OLinuXino-Lime profile
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44322
Luka Perkov [Sun, 8 Feb 2015 15:31:25 +0000 (15:31 +0000)]
x86: refresh kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44321
Luka Perkov [Sun, 8 Feb 2015 15:09:45 +0000 (15:09 +0000)]
lantiq: fix patches after 3.14.32 bump
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44320
Luka Perkov [Sun, 8 Feb 2015 12:01:39 +0000 (12:01 +0000)]
kirkwood: refresh kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44319
Luka Perkov [Sun, 8 Feb 2015 12:01:37 +0000 (12:01 +0000)]
kernel: update 3.18 to 3.18.6
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44318
Jo-Philipp Wich [Sat, 7 Feb 2015 21:26:20 +0000 (21:26 +0000)]
x86: declare missing kernel symbols
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44316
Luka Perkov [Sat, 7 Feb 2015 21:11:06 +0000 (21:11 +0000)]
ar71xx: ubnt: move new board patches into one
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44315
Luka Perkov [Sat, 7 Feb 2015 21:10:51 +0000 (21:10 +0000)]
ar71xx: rb2011: apply patch to file
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44314
Jo-Philipp Wich [Sat, 7 Feb 2015 21:01:48 +0000 (21:01 +0000)]
imagebuilder: align filename with SDK
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44313
Jo-Philipp Wich [Sat, 7 Feb 2015 21:01:43 +0000 (21:01 +0000)]
sdk: rename file to mention target/subtarget and move host system to suffix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44312
Jo-Philipp Wich [Sat, 7 Feb 2015 21:01:37 +0000 (21:01 +0000)]
toolchain: respect CONFIG_VERSION_FILENAMES and add host system suffix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44311
Jo-Philipp Wich [Sat, 7 Feb 2015 21:01:28 +0000 (21:01 +0000)]
openvpn: autostart openvpn instances for each .conf file in /etc/openvpn
Align init behaviour with other distros by starting an OpenVPN instance
for each config file found in /etc/openvpn/. This removes the additional
requirement to "register" the configs with uci and thus simplifies the
setup.
Make sure to respect the disabled state in uci to not suddenly autostart
instances which have been previously set to disabled, also skip configs
which are already started due to uci configuration.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44310
Luka Perkov [Sat, 7 Feb 2015 20:53:16 +0000 (20:53 +0000)]
ar71xx: merge board specific patches into one
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44309
Luka Perkov [Sat, 7 Feb 2015 19:59:08 +0000 (19:59 +0000)]
package: uboot-envtools: add nbg6716 to appropriate group
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44308
Luka Perkov [Sat, 7 Feb 2015 19:59:05 +0000 (19:59 +0000)]
ar71xx: uci-defaults: add el-mini to appropriate group
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44307
Luka Perkov [Sat, 7 Feb 2015 19:59:02 +0000 (19:59 +0000)]
ar71xx: qihoo: define flash variable as static
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44306
Luka Perkov [Sat, 7 Feb 2015 19:58:58 +0000 (19:58 +0000)]
targets: base-files: diag.sh does not need to be executable
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44305
Luka Perkov [Sat, 7 Feb 2015 19:58:52 +0000 (19:58 +0000)]
targets: files in uci-defaults do not need to be executables
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44304
Luka Perkov [Sat, 7 Feb 2015 17:48:39 +0000 (17:48 +0000)]
ar71xx: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44303
Luka Perkov [Sat, 7 Feb 2015 17:48:33 +0000 (17:48 +0000)]
kernel: update 3.14 to 3.14.32
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44302
Jo-Philipp Wich [Sat, 7 Feb 2015 13:33:15 +0000 (13:33 +0000)]
6in4: don't use /dev/stdout for wget calls
Busybox ash does not implement /dev/stdout, therfore any wget output
is written into a file /dev/stdout instead of onto the standard output.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44301
Felix Fietkau [Sat, 7 Feb 2015 10:07:31 +0000 (10:07 +0000)]
build: accept apple llvm as fallback for gcc/g++
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44298
Felix Fietkau [Sat, 7 Feb 2015 10:07:05 +0000 (10:07 +0000)]
include/prereq.mk: fix echo commands with simple /bin/sh
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44297
Jo-Philipp Wich [Fri, 6 Feb 2015 17:38:54 +0000 (17:38 +0000)]
include: fix prereq tests for perl and file (#18911)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44296
Jo-Philipp Wich [Fri, 6 Feb 2015 13:14:29 +0000 (13:14 +0000)]
include: use SHELL, not BASH for HOST_CONFIGURE_VARS
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44295
Jo-Philipp Wich [Fri, 6 Feb 2015 12:35:36 +0000 (12:35 +0000)]
rules.mk: use relative paths for BASH, TAR, FIND, PATCH, PYTHON
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44294
Jo-Philipp Wich [Fri, 6 Feb 2015 12:31:31 +0000 (12:31 +0000)]
imagebuilder: don't pregenerate package index, strip host binaries
The package index is generated on first use anyway, therefore it makes no
sense to continue shipping it.
Also sstrip the bundled host binaries when packing the IB to save some
additional space.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44293
Jo-Philipp Wich [Fri, 6 Feb 2015 11:50:08 +0000 (11:50 +0000)]
include: rework git prereq test to not require 'man'
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44292
Imre Kaloz [Fri, 6 Feb 2015 11:18:59 +0000 (11:18 +0000)]
mvebu: add note about the move to single firmware files
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44291
Imre Kaloz [Fri, 6 Feb 2015 11:16:20 +0000 (11:16 +0000)]
mvebu: support building images for a single board
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44290
Jo-Philipp Wich [Fri, 6 Feb 2015 10:30:04 +0000 (10:30 +0000)]
libevent2: update to v2.0.22
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44289
Jo-Philipp Wich [Fri, 6 Feb 2015 00:27:06 +0000 (00:27 +0000)]
imagebuilder: use FreeBSD compatible tar invocation
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44288
Jo-Philipp Wich [Fri, 6 Feb 2015 00:00:51 +0000 (00:00 +0000)]
config: remove CONFIG_BUILD_STATIC_TOOLS
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44287
Jo-Philipp Wich [Fri, 6 Feb 2015 00:00:47 +0000 (00:00 +0000)]
include: remove static tool linking support
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44286
Jo-Philipp Wich [Fri, 6 Feb 2015 00:00:43 +0000 (00:00 +0000)]
tools: remove static linking support
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44285
Jo-Philipp Wich [Thu, 5 Feb 2015 23:32:17 +0000 (23:32 +0000)]
busybox: fix build on FreeBSD 10.1
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44284
Jo-Philipp Wich [Thu, 5 Feb 2015 23:18:47 +0000 (23:18 +0000)]
mac80211: don't hardcode /bin/bash
Instead of hardcoding /bin/bash, use /usr/bin/env bash - this fixes the
build on FreeBSD 10.1.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44283
Jo-Philipp Wich [Thu, 5 Feb 2015 23:18:42 +0000 (23:18 +0000)]
ncurses: add host build for 'tic'
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44282
Jo-Philipp Wich [Thu, 5 Feb 2015 16:58:24 +0000 (16:58 +0000)]
tools: Fix cmake build on FreeBSD 10.1
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44281
Jo-Philipp Wich [Thu, 5 Feb 2015 16:58:16 +0000 (16:58 +0000)]
tools: Fix mkimage build on FreeBSD 10.1
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44280
Jo-Philipp Wich [Thu, 5 Feb 2015 16:58:10 +0000 (16:58 +0000)]
tools: Fix mpfr build on FreeBSD 10.1
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44279
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:57 +0000 (16:57 +0000)]
tools: Fix xz build on FreeBSD 10.1
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44278
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:50 +0000 (16:57 +0000)]
include: let HOSTCC default to $(CC), not gcc
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44277
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:46 +0000 (16:57 +0000)]
include: don't rely on perl for printing prereq errors
Perl might not be present while checking prereqs, e.g. on a fresh
FreeBSD install.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44276
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:39 +0000 (16:57 +0000)]
include: set shell to "sh" for prereq tests
Bash is not guaranteed to be present, e.g. on a fresh FreeBSD install
so perform prereq tests with /bin/sh.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44275
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:35 +0000 (16:57 +0000)]
tools: remove PrepareCommand macros
They're part of prereq-build.mk now.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44274
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:31 +0000 (16:57 +0000)]
include: remove host command tests from host.mk
Those tests are part of prereq-build.mk now.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44273
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:18 +0000 (16:57 +0000)]
include: declare variables formerly set in tmp/.host.mk
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44272
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:12 +0000 (16:57 +0000)]
include: prereq-build.mk: use TestHostCommand and SetupHostCommand
Also move tests from tools/Makefile and include/host.mk here to have all tests
in a central place.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44271
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:09 +0000 (16:57 +0000)]
include: test build prereqs before preparing tempinfo
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44270
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:02 +0000 (16:57 +0000)]
include: add TestHostCommand and SetupHostCommand macros
Those macros allow testing various commands on the host system, also process the
prereq tests in the order they're declared.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44269
Imre Kaloz [Thu, 5 Feb 2015 16:31:52 +0000 (16:31 +0000)]
mvebu: don't generate targz images by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44268
Imre Kaloz [Thu, 5 Feb 2015 15:41:07 +0000 (15:41 +0000)]
mvebu: Enable the A385 AP on 3.19
In order for the image to be built, some patches need to be ported to 3.19.
Add the relevant patches. Note that most of them (if not all) should be merged
in 3.20, removing the need to carry them on then.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44267
Imre Kaloz [Thu, 5 Feb 2015 11:34:21 +0000 (11:34 +0000)]
mvebu: add Armada 385 DB AP support
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44266
Imre Kaloz [Thu, 5 Feb 2015 11:29:56 +0000 (11:29 +0000)]
mvebu: add the Armada 385 Reference Design support
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44265
Imre Kaloz [Thu, 5 Feb 2015 11:26:17 +0000 (11:26 +0000)]
mvebu: fix NAND and NOR options
All the boards but Mamba had wrong UBI options so far, making it impossible to
flash the built image on their respective storage medium.
Fix all of the supported boards in order to make the generated images useful.
Tested on a Mirabox, an Armada XP GP and an Openblocks AX3, and used the NAND
chip datasheet for the others.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44264
Imre Kaloz [Thu, 5 Feb 2015 11:25:21 +0000 (11:25 +0000)]
mvebu: add a subprofile for boards based on a small NOR
Some boards only come with a small NOR on it, where UBI isn't a good solution
because of its overhead.
Add a new subprofile for such boards, that rely on the mtd split framework
instead.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44263
Imre Kaloz [Thu, 5 Feb 2015 11:24:10 +0000 (11:24 +0000)]
mvebu: add large NOR sub-profile implementation
While we supported only the NAND so far, some boards use a large enough NOR,
where UBI is the only reasonable option. Create a new sub-profile template with
a different set of UBI options.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44262
projects / openwrt / staging / blocktrron.git / log