git.openwrt.org Git - openwrt/staging/blogic.git/log

blkcg: associate a blkg for pages being evicted by swap

A prior patch in this series added blkg association to bios issued by
cgroups. There are two other paths that we want to attribute work back
to the appropriate cgroup: swap and writeback. Here we modify the way
swap tags bios to include the blkg. Writeback will be tackle in the next
patch.

Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blkcg: consolidate bio_issue_init to be a part of core

bio_issue_init among other things initializes the timestamp for an IO.
Rather than have this logic handled by policies, this consolidates it to
be on the init paths (normal, clone, bounce clone).

Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blkcg: always associate a bio with a blkg

Previously, blkg's were only assigned as needed by blk-iolatency and
blk-throttle. bio->css was also always being associated while blkg was
being looked up and then thrown away in blkcg_bio_issue_check.

This patch begins the cleanup of bio->css and bio->bi_blkg by always
associating a blkg in blkcg_bio_issue_check. This tries to create the
blkg, but if it is not possible, falls back to using the root_blkg of
the request_queue. Therefore, a bio will always be associated with a
blkg. The duplicate association logic is removed from blk-throttle and
blk-iolatency.

Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blkcg: convert blkg_lookup_create to find closest blkg

There are several scenarios where blkg_lookup_create can fail. Examples
include the blkcg dying, request_queue is dying, or simply being OOM. At
the end of the day, most handle this by simply falling back to the
q->root_blkg and calling it a day.

This patch implements the notion of closest blkg. During
blkg_lookup_create, if it fails to create, return the closest blkg
found or the q->root_blkg. blkg_try_get_closest is introduced and used
during association so a bio is always attached to a blkg.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blkcg: update blkg_lookup_create to do locking

To know when to create a blkg, the general pattern is to do a
blkg_lookup and if that fails, lock and then do a lookup again and if
that fails finally create. It doesn't make much sense for everyone who
wants to do creation to write this themselves.

This changes blkg_lookup_create to do locking and implement this
pattern. The old blkg_lookup_create is renamed to __blkg_lookup_create.
If a call site wants to do its own error handling or already owns the
queue lock, they can use __blkg_lookup_create. This will be used in
upcoming patches.

Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blkcg: fix ref count issue with bio_blkcg using task_css

The accessor function bio_blkcg either returns the blkcg associated with
the bio or finds one in the current context. This can cause an issue
when trying to associate a bio with a blkcg. Particularly, it's the
third case that is problematic:

return css_to_blkcg(task_css(current, io_cgrp_id));

As the above may race against task migration and the cgroup exiting, it
is not always ok to take a reference on the blkcg returned from
bio_blkcg.

This patch adds association ahead of calling bio_blkcg rather than
after. This makes association a required and explicit step along the
code paths for calling bio_blkcg. blk_get_rl is modified as well to get
a reference to the blkcg it may use and blk_put_rl will always put the
reference back. Association is also moved above the bio_blkcg call to
ensure it will not return NULL in blk-iolatency.

BFQ and CFQ utilize this flaw, but due to the complexity, I do not want
to address this in this series. I've created a private version of the
function with notes not to use it describing the flaw. Hopefully soon,
that code can be cleaned up.

Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Blk-throttle: update to use rbtree with leftmost node cached

As rbtree has native support of caching leftmost node,
i.e. rb_root_cached, no need to do the caching by ourselves.

Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: use bio_add_page in bio_iov_iter_get_pages

Replace a nasty hack with a different nasty hack to prepare for multipage
bio_vecs. By moving the temporary page array as far up as possible in
the space allocated for the bio_vec array we can iterate forward over it
and thus use bio_add_page. Using bio_add_page means we'll be able to
merge physically contiguous pages once support for multipath bio_vecs is
merged.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blok, bfq: do not plug I/O if all queues are weight-raised

To reduce latency for interactive and soft real-time applications, bfq
privileges the bfq_queues containing the I/O of these
applications. These privileged queues, referred-to as weight-raised
queues, get a much higher share of the device throughput
w.r.t. non-privileged queues. To preserve this higher share, the I/O
of any non-weight-raised queue must be plugged whenever a sync
weight-raised queue, while being served, remains temporarily empty. To
attain this goal, bfq simply plugs any I/O (from any queue), if a sync
weight-raised queue remains empty while in service.

Unfortunately, this plugging typically lowers throughput with random
I/O, on devices with internal queueing (because it reduces the filling
level of the internal queues of the device).

This commit addresses this issue by restricting the cases where
plugging is performed: if a sync weight-raised queue remains empty
while in service, then I/O plugging is performed only if some of the
active bfq_queues are *not* weight-raised (which is actually the only
circumstance where plugging is needed to preserve the higher share of
the throughput of weight-raised queues). This restriction proved able
to boost throughput in really many use cases needing only maximum
throughput.

Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block, bfq: inject other-queue I/O into seeky idle queues on NCQ flash

The Achilles' heel of BFQ is its failing to reach a high throughput
with sync random I/O on flash storage with internal queueing, in case
the processes doing I/O have differentiated weights.

The cause of this failure is as follows. If at least two processes do
sync I/O, and have a different weight from each other, then BFQ plugs
I/O dispatching every time one of these processes, while it is being
served, remains temporarily without pending I/O requests. This
plugging is necessary to guarantee that every process enjoys a
bandwidth proportional to its weight; but it empties the internal
queue(s) of the drive. And this kills throughput with random I/O. So,
if some processes have differentiated weights and do both sync and
random I/O, the end result is a throughput collapse.

This commit tries to counter this problem by injecting the service of
other processes, in a controlled way, while the process in service
happens to have no I/O. This injection is performed only if the medium
is non rotational and performs internal queueing, and the process in
service does random I/O (service injection might be beneficial for
sequential I/O too, we'll work on that).

As an example of the benefits of this commit, on a PLEXTOR PX-256M5S
SSD, and with five processes having differentiated weights and doing
sync random 4KB I/O, this commit makes the throughput with bfq grow by
400%, from 25 to 100MB/s. This higher throughput is 10MB/s lower than
that reached with none. As some less random I/O is added to the mix,
the throughput becomes equal to or higher than that with none.

This commit is a very first attempt to recover throughput without
losing control, and certainly has many limitations. One is, e.g., that
the processes whose service is injected are not chosen so as to
distribute the extra bandwidth they receive in accordance to their
weights. Thus there might be loss of weighted fairness in some
cases. Anyway, this loss concerns extra service, which would not have
been received at all without this commit. Other limitations and issues
will probably show up with usage.

Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block, bfq: correctly charge and reset entity service in all cases

BFQ schedules entities (which represent either per-process queues or
groups of queues) as a function of their timestamps. In particular, as
a function of their (virtual) finish times. The finish time of an
entity is computed as a function of the budget assigned to the entity,
assuming, tentatively, that the entity, once in service, will receive
an amount of service equal to its budget. Then, when the entity is
expired because it finishes to be served, this finish time is updated
as a function of the actual service received by the entity. This
allows the entity to be correctly charged with only the service
received, and then to be correctly re-scheduled.

Yet an entity may receive service also while not being the entity in
service (in the scheduling environment of its parent entity), for
several reasons. If the entity remains with no backlog while receiving
this 'unofficial' service, then it is expired. Also on such an
expiration, the finish time of the entity should be updated to account
for only the service actually received by the entity. Unfortunately,
such an update is not performed for an entity expiring without being
the entity in service.

In a similar vein, the service counter of the entity in service is
reset when the entity is expired, to be ready to be used for next
service cycle. This reset too should be performed also in case an
entity is expired because it remains empty after receiving service
while not being the entity in service. But in this case the reset is
not performed.

This commit performs the above update of the finish time and reset of
the service received, also for an entity expiring while not being the
entity in service.

Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-iolatency: remove set but not used variables 'changed' and 'blkiolat'

Fixes gcc '-Wunused-but-set-variable' warning:

block/blk-iolatency.c: In function 'scale_change':
block/blk-iolatency.c:301:7: warning:
variable 'changed' set but not used [-Wunused-but-set-variable]

block/blk-iolatency.c: In function 'iolatency_set_limit':
block/blk-iolatency.c:765:24: warning:
variable 'blkiolat' set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

rsxx: Remove unnecessary parentheses

Clang warns when more than one set of parentheses is used for a
single conditional statement:

drivers/block/rsxx/cregs.c:279:15: warning: equality comparison with
extraneous parentheses [-Wparentheses-equality]
        if ((cmd->op == CREG_OP_READ)) {
             ~~~~~~~~^~~~~~~~~~~~~~~
drivers/block/rsxx/cregs.c:279:15: note: remove extraneous parentheses
around the comparison to silence this warning
        if ((cmd->op == CREG_OP_READ)) {
            ~        ^              ~
drivers/block/rsxx/cregs.c:279:15: note: use '=' to turn this equality
comparison into an assignment
        if ((cmd->op == CREG_OP_READ)) {
                     ^~
                     =
1 warning generated.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: umem: replace spin_lock_bh with spin_lock in tasklet callback

As you are already in a tasklet, it is unnecessary to call spin_lock_bh.

Signed-off-by: jun qian <hangdianqj@163.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove bio_rewind_iter()

It is pointed that bio_rewind_iter() is one very bad API[1]:

1) bio size may not be restored after rewinding

2) it causes some bogus change, such as 5151842b9d8732 (block: reset
bi_iter.bi_done after splitting bio)

3) rewinding really makes things complicated wrt. bio splitting

4) unnecessary updating of .bi_done in fast path

[1] https://marc.info/?t=153549924200005&r=1&w=2

So this patch takes Kent's suggestion to restore one bio into its original
state via saving bio iterator(struct bvec_iter) in bio_integrity_prep(),
given now bio_rewind_iter() is only used by bio integrity code.

Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Hannes Reinecke <hare@suse.com>
Suggested-by: Kent Overstreet <kent.overstreet@gmail.com>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Convert from ahash to shash

In preparing to remove all stack VLA usage from the kernel[1], this
removes the discouraged use of AHASH_REQUEST_ON_STACK in favor of
the smaller SHASH_DESC_ON_STACK by converting from ahash-wrapped-shash
to direct shash. By removing a layer of indirection this both improves
performance and reduces stack usage. The stack allocation will be made
a fixed size in a later patch to the crypto subsystem.

The bulk of the lines in this change are simple s/ahash/shash/, but the
main logic differences are in drbd_csum_ee() and drbd_csum_bio(), which
externalizes the page walking with k(un)map_atomic() instead of using
scattergather.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com

Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'for-linus-20180906' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"Small collection of fixes that should go into this release. This
  contains:

   - Small series that fixes a race between blkcg teardown and writeback
     (Dennis Zhou)

   - Fix disallowing invalid block size settings from the nbd ioctl (me)

   - BFQ fix for a use-after-free on last release of a bfqg (Konstantin
     Khlebnikov)

   - Fix for the "don't warn for flush" fix (Mikulas)"

* tag 'for-linus-20180906' of git://git.kernel.dk/linux-block:
  block: bfq: swap puts in bfqg_and_blkg_put
  block: don't warn when doing fsync on read-only devices
  nbd: don't allow invalid blocksize settings
  blkcg: use tryget logic when associating a blkg with a bio
  blkcg: delay blkg destruction until after writeback has finished
  Revert "blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()"

block: bfq: swap puts in bfqg_and_blkg_put

Fix trivial use-after-free. This could be last reference to bfqg.

Fixes: 8f9bebc33dd7 ("block, bfq: access and cache blkg data only when safe")
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'apparmor-pr-2018-09-06' of git://git./linux/kernel/git/jj/linux-apparmor

Pull apparmor fix from John Johansen:
"A fix for an issue syzbot discovered last week:

- Fix for bad debug check when converting secids to secctx"

* tag 'apparmor-pr-2018-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix bad debug check in apparmor_secid_to_secctx()

Merge tag 'trace-v4.19-rc2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
"This fixes two annoying bugs:

   - The first one is a side effect caused by using SRCU for rcuidle
     tracepoints. It seems that the perf was depending on the rcuidle
     tracepoints to make RCU watch when it wasn't.

     The real fix will be to have perf use SRCU instead of depending on
     RCU watching, but that can't be done until SRCU is safe to use in
     NMI context (Paul's working on that).

   - The second bug fix is for a bug that's been periodically making my
     tests fail randomly for some time. I haven't had time to track it
     down, but finally have. It has to do with stressing NMIs (via perf)
     while enabling or disabling ftrace function handling with lockdep
     enabled.

     If an interrupt happens and just as it returns, it sets lockdep
     back to "interrupts enabled" but before it returns an NMI is
     triggered, and if this happens while printk_nmi_enter has a
     breakpoint attached to it (because ftrace is converting it to or
     from nop to call fentry), the breakpoint trap also calls into
     lockdep, and since returning from the NMI to a interrupt handler,
     interrupts were disabled when the NMI went off, lockdep keeps its
     state as interrupts disabled when it returns back from the
     interrupt handler where interrupts are enabled.

     This causes lockdep_assert_irqs_enabled() to trigger a false
     positive"

* tag 'trace-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  printk/tracing: Do not trace printk_nmi_enter()
  tracing: Add back in rcu_irq_enter/exit_irqson() for rcuidle tracepoints

Merge tag 'for-4.19-rc2-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- fix for improper fsync after hardlink

- fix for a corruption during file deduplication

- use after free fixes

- RCU warning fix

- fix for buffered write to nodatacow file

* tag 'for-4.19-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: Fix suspicious RCU usage warning in btrfs_debug_in_rcu
  btrfs: use after free in btrfs_quota_enable
  btrfs: btrfs_shrink_device should call commit transaction at the end
  btrfs: fix qgroup_free wrong num_bytes in btrfs_subvolume_reserve_metadata
  Btrfs: fix data corruption when deduplicating between different files
  Btrfs: sync log after logging new name
  Btrfs: fix unexpected failure of nocow buffered writes after snapshotting when low on space

printk/tracing: Do not trace printk_nmi_enter()

I hit the following splat in my tests:

------------[ cut here ]------------
IRQs not enabled as expected
WARNING: CPU: 3 PID: 0 at kernel/time/tick-sched.c:982 tick_nohz_idle_enter+0x44/0x8c
Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6table_filter ip6_tables ipv6
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.19.0-rc2-test+ #2
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
EIP: tick_nohz_idle_enter+0x44/0x8c
Code: ec 05 00 00 00 75 26 83 b8 c0 05 00 00 00 75 1d 80 3d d0 36 3e c1 00
75 14 68 94 63 12 c1 c6 05 d0 36 3e c1 01 e8 04 ee f8 ff <0f> 0b 58 fa bb a0
e5 66 c1 e8 25 0f 04 00 64 03 1d 28 31 52 c1 8b
EAX: 0000001c EBX: f26e7f8c ECX: 00000006 EDX: 00000007
ESI: f26dd1c0 EDI: 00000000 EBP: f26e7f40 ESP: f26e7f38
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010296
CR0: 80050033 CR2: 0813c6b0 CR3: 2f342000 CR4: 001406f0
Call Trace:
do_idle+0x33/0x202
cpu_startup_entry+0x61/0x63
start_secondary+0x18e/0x1ed
startup_32_smp+0x164/0x168
irq event stamp: 18773830
hardirqs last  enabled at (18773829): [<c040150c>] trace_hardirqs_on_thunk+0xc/0x10
hardirqs last disabled at (18773830): [<c040151c>] trace_hardirqs_off_thunk+0xc/0x10
softirqs last  enabled at (18773824): [<c0ddaa6f>] __do_softirq+0x25f/0x2bf
softirqs last disabled at (18773767): [<c0416bbe>] call_on_stack+0x45/0x4b
---[ end trace b7c64aa79e17954a ]---

After a bit of debugging, I found what was happening. This would trigger
when performing "perf" with a high NMI interrupt rate, while enabling and
disabling function tracer. Ftrace uses breakpoints to convert the nops at
the start of functions to calls to the function trampolines. The breakpoint
traps disable interrupts and this makes calls into lockdep via the
trace_hardirqs_off_thunk in the entry.S code. What happens is the following:

  do_idle {

    [interrupts enabled]

    <interrupt> [interrupts disabled]
TRACE_IRQS_OFF [lockdep says irqs off]
[...]
TRACE_IRQS_IRET
    test if pt_regs say return to interrupts enabled [yes]
    TRACE_IRQS_ON [lockdep says irqs are on]

    <nmi>
nmi_enter() {
    printk_nmi_enter() [traced by ftrace]
    [ hit ftrace breakpoint ]
    <breakpoint exception>
TRACE_IRQS_OFF [lockdep says irqs off]
[...]
TRACE_IRQS_IRET [return from breakpoint]
   test if pt_regs say interrupts enabled [no]
   [iret back to interrupt]
   [iret back to code]

    tick_nohz_idle_enter() {

lockdep_assert_irqs_enabled() [lockdep say no!]

Although interrupts are indeed enabled, lockdep thinks it is not, and since
we now do asserts via lockdep, it gives a false warning. The issue here is
that printk_nmi_enter() is called before lockdep_off(), which disables
lockdep (for this reason) in NMIs. By simply not allowing ftrace to see
printk_nmi_enter() (via notrace annotation) we keep lockdep from getting
confused.

Cc: stable@vger.kernel.org
Fixes: 42a0bb3f71383 ("printk/nmi: generic solution for safe printk in NMI")
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

block: don't warn when doing fsync on read-only devices

It is possible to call fsync on a read-only handle (for example, fsck.ext2
does it when doing read-only check), and this call results in kernel
warning.

The patch b089cfd95d32 ("block: don't warn for flush on read-only device")
attempted to disable the warning, but it is buggy and it doesn't
(op_is_flush tests flags, but bio_op strips off the flags).

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 721c7fc701c7 ("block: fail op_is_write() requests to read-only partitions")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'gpio-v4.19-2' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes. The ACPI stuff is probably the most annoying for
  users that get fixed this time.

   - Atomic contexts, cansleep* calls and such fastpath/slopwpath
     things.

   - Defer ACPI event handler registration to late_initcall() so IRQs do
     not fire in our face before other drivers have a chance to register
     handlers.

   - Race condition if a consumer requests a GPIO after
     gpiochip_add_data_with_key() but before of_gpiochip_add()

   - Probe errorpath in the dwapb driver"

* tag 'gpio-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: Fix crash due to registration race
  gpio: dwapb: Fix error handling in dwapb_gpio_probe()
  gpiolib-acpi: Register GpioInt ACPI event handlers from a late_initcall
  gpiolib: acpi: Switch to cansleep version of GPIO library call
  gpio: adp5588: Fix sleep-in-atomic-context bug

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"A set of very minor fixes and a couple of reverts to fix a major
  problem (the attempt to change the busy count causes a hang when
  attempting to change the drive cache type)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: aacraid: fix a signedness bug
  Revert "scsi: core: avoid host-wide host_busy counter for scsi_mq"
  Revert "scsi: core: fix scsi_host_queue_ready"
  scsi: libata: Add missing newline at end of file
  scsi: target: iscsi: cxgbit: use pr_debug() instead of pr_info()
  scsi: hpsa: limit transfer length to 1MB, not 512kB
  scsi: lpfc: Correct MDS diag and nvmet configuration
  scsi: lpfc: Default fdmi_on to on
  scsi: csiostor: fix incorrect port capabilities
  scsi: csiostor: add a check for NULL pointer after kmalloc()
  scsi: documentation: add scsi_mod.use_blk_mq to scsi-parameters
  scsi: core: Update SCSI_MQ_DEFAULT help text to match default

Merge tag 'nds32-for-linus-4.19-tag1' of git://git./linux/kernel/git/greentime/linux

Pull nds32 updates from Greentime Hu:
"Contained in here are the bug fixes, building error fixes and ftrace
  support for nds32"

* tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
  nds32: linker script: GCOV kernel may refers data in __exit
  nds32: fix build error because of wrong semicolon
  nds32: Fix a kernel panic issue because of wrong frame pointer access.
  nds32: Only print one page of stack when die to prevent printing too much information.
  nds32: Add macro definition for offset of lp register on stack
  nds32: Remove the deprecated ABI implementation
  nds32/stack: Get real return address by using ftrace_graph_ret_addr
  nds32/ftrace: Support dynamic function graph tracer
  nds32/ftrace: Support dynamic function tracer
  nds32/ftrace: Add RECORD_MCOUNT support
  nds32/ftrace: Support static function graph tracer
  nds32/ftrace: Support static function tracer
  nds32: Extract the checking and getting pointer to a macro
  nds32: Clean up the coding style
  nds32: Fix get_user/put_user macro expand pointer problem
  nds32: Fix empty call trace
  nds32: add NULL entry to the end of_device_id array
  nds32: fix logic for module

tracing: Add back in rcu_irq_enter/exit_irqson() for rcuidle tracepoints

Borislav reported the following splat:

=============================
WARNING: suspicious RCU usage
4.19.0-rc1+ #1 Not tainted
-----------------------------
./include/linux/rcupdate.h:631 rcu_read_lock() used illegally while idle!
other info that might help us debug this:

RCU used illegally from idle CPU!
rcu_scheduler_active = 2, debug_locks = 1
RCU used illegally from extended quiescent state!
1 lock held by swapper/0/0:
  #0: 000000004557ee0e (rcu_read_lock){....}, at: perf_event_output_forward+0x0/0x130

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0-rc1+ #1
Hardware name: LENOVO 2320CTO/2320CTO, BIOS G2ET86WW (2.06 ) 11/13/2012
Call Trace:
  dump_stack+0x85/0xcb
  perf_event_output_forward+0xf6/0x130
  __perf_event_overflow+0x52/0xe0
  perf_swevent_overflow+0x91/0xb0
  perf_tp_event+0x11a/0x350
  ? find_held_lock+0x2d/0x90
  ? __lock_acquire+0x2ce/0x1350
  ? __lock_acquire+0x2ce/0x1350
  ? retint_kernel+0x2d/0x2d
  ? find_held_lock+0x2d/0x90
  ? tick_nohz_get_sleep_length+0x83/0xb0
  ? perf_trace_cpu+0xbb/0xd0
  ? perf_trace_buf_alloc+0x5a/0xa0
  perf_trace_cpu+0xbb/0xd0
  cpuidle_enter_state+0x185/0x340
  do_idle+0x1eb/0x260
  cpu_startup_entry+0x5f/0x70
  start_kernel+0x49b/0x4a6
  secondary_startup_64+0xa4/0xb0

This is due to the tracepoints moving to SRCU usage which does not require
RCU to be "watching". But perf uses these tracepoints with RCU and expects
it to be. Hence, we still need to add in the rcu_irq_enter/exit_irqson()
calls for "rcuidle" tracepoints. This is a temporary fix until we have SRCU
working in NMI context, and then perf can be converted to use that instead
of normal RCU.

Link: http://lkml.kernel.org/r/20180904162611.6a120068@gandalf.local.home
Cc: x86-ml <x86@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Fixes: e6753f23d961d ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

nds32: linker script: GCOV kernel may refers data in __exit

This patch is used to fix nds32 allmodconfig/allyesconfig build error
because GCOV kernel embeds counters in the kernel for each line
and a part of that embed in __exit text. So we need to keep the
EXIT_TEXT and EXIT_DATA if CONFIG_GCOV_KERNEL=y.

Link: https://lkml.org/lkml/2018/9/1/125
Signed-off-by: Greentime Hu <greentime@andestech.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"17 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  nilfs2: convert to SPDX license tags
  drivers/dax/device.c: convert variable to vm_fault_t type
  lib/Kconfig.debug: fix three typos in help text
  checkpatch: add __ro_after_init to known $Attribute
  mm: fix BUG_ON() in vmf_insert_pfn_pud() from VM_MIXEDMAP removal
  uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name
  memory_hotplug: fix kernel_panic on offline page processing
  checkpatch: add optional static const to blank line declarations test
  ipc/shm: properly return EIDRM in shm_lock()
  mm/hugetlb: filter out hugetlb pages if HUGEPAGE migration is not supported.
  mm/util.c: improve kvfree() kerneldoc
  tools/vm/page-types.c: fix "defined but not used" warning
  tools/vm/slabinfo.c: fix sign-compare warning
  kmemleak: always register debugfs file
  mm: respect arch_dup_mmap() return value
  mm, oom: fix missing tlb_finish_mmu() in __oom_reap_task_mm().
  mm: memcontrol: print proper OOM header when no eligible victim left

nilfs2: convert to SPDX license tags

Remove the verbose license text from NILFS2 files and replace them with
SPDX tags. This does not change the license of any of the code.

Link: http://lkml.kernel.org/r/1535624528-5982-1-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/dax/device.c: convert variable to vm_fault_t type

As part of 226ab561075f ("device-dax: Convert to vmf_insert_mixed and
vm_fault_t") in 4.19-rc1, 'rc' was not converted to vm_fault_t. Now
converted.

Link: http://lkml.kernel.org/r/20180830153813.GA26059@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/Kconfig.debug: fix three typos in help text

Fix three typos in CONFIG_WARN_ALL_UNSEEDED_RANDOM help text.

Link: http://lkml.kernel.org/r/20180830194505.4778-1-thibaut@sautereau.fr
Signed-off-by: Thibaut Sautereau <thibaut@sautereau.fr>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add __ro_after_init to known $Attribute

__ro_after_init is a specific __attribute__ that checkpatch does currently
not understand.

Add it to the known $Attribute types so that code that uses variables
declared with __ro_after_init are not thought to be a modifier type.

This appears as a defect in checkpatch output of code like:

static bool trust_cpu __ro_after_init = IS_ENABLED(CONFIG_RANDOM_TRUST_CPU);
[...]
if (trust_cpu && arch_init) {

where checkpatch reports:

ERROR: space prohibited after that '&&' (ctx:WxW)
if (trust_cpu && arch_init) {

Link: http://lkml.kernel.org/r/0fa8a2cb83ade4c525e18261ecf6cfede3015983.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix BUG_ON() in vmf_insert_pfn_pud() from VM_MIXEDMAP removal

It looks like I missed the PUD path when doing VM_MIXEDMAP removal.
This can be triggered by:
1. Boot with memmap=4G!8G
2. build ndctl with destructive flag on
3. make TESTS=device-dax check

[ +0.000675] kernel BUG at mm/huge_memory.c:824!

Applying the same change that was applied to vmf_insert_pfn_pmd() in the
original patch.

Link: http://lkml.kernel.org/r/153565957352.35524.1005746906902065126.stgit@djiang5-desk3.ch.intel.com
Fixes: e1fb4a08649 ("dax: remove VM_MIXEDMAP for fsdax and device dax")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name

Since this header is in "include/uapi/linux/", apparently people want to
use it in userspace programs -- even in C++ ones. However, the header
uses a C++ reserved keyword ("private"), so change that to "dh_private"
instead to allow the header file to be used in C++ userspace.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=191051
Link: http://lkml.kernel.org/r/0db6c314-1ef4-9bfa-1baa-7214dd2ee061@infradead.org
Fixes: ddbb41148724 ("KEYS: Add KEYCTL_DH_COMPUTE command")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory_hotplug: fix kernel_panic on offline page processing

Within show_valid_zones() the function test_pages_in_a_zone() should be
called for online memory blocks only.

Otherwise it might lead to the VM_BUG_ON due to uninitialized struct
pages (when CONFIG_DEBUG_VM_PGFLAGS kernel option is set):

page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
------------[ cut here ]------------
Call Trace:
([<000000000038f91e>] test_pages_in_a_zone+0xe6/0x168)
  [<0000000000923472>] show_valid_zones+0x5a/0x1a8
  [<0000000000900284>] dev_attr_show+0x3c/0x78
  [<000000000046f6f0>] sysfs_kf_seq_show+0xd0/0x150
  [<00000000003ef662>] seq_read+0x212/0x4b8
  [<00000000003bf202>] __vfs_read+0x3a/0x178
  [<00000000003bf3ca>] vfs_read+0x8a/0x148
  [<00000000003bfa3a>] ksys_read+0x62/0xb8
  [<0000000000bc2220>] system_call+0xdc/0x2d8

That VM_BUG_ON was triggered by the page poisoning introduced in
mm/sparse.c with the git commit d0dc12e86b31 ("mm/memory_hotplug:
optimize memory hotplug").

With the same commit the new 'nid' field has been added to the struct
memory_block in order to store and later on derive the node id for
offline pages (instead of accessing struct page which might be
uninitialized).  But one reference to nid in show_valid_zones() function
has been overlooked.  Fixed with current commit.  Also, nr_pages will
not be used any more after test_pages_in_a_zone() call, do not update
it.

Link: http://lkml.kernel.org/r/20180828090539.41491-1-zaslonko@linux.ibm.com
Fixes: d0dc12e86b31 ("mm/memory_hotplug: optimize memory hotplug")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add optional static const to blank line declarations test

Using a static const struct definition as part of a series of
declarations produces a false positive "Missing a blank line after
declarations" for code like:

  WARNING: Missing a blank line after declarations
  #710: FILE: drivers/gpu/drm/tidss/tidss_scale_coefs.c:137:
  +       int inc;
  +       static const struct {

So fix it.

Link: http://lkml.kernel.org/r/5905126e70b0ed1781e49265fd5c49c5090d0223.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Jyri Sarha <jsarha@ti.com>
Cc: "Valkeinen, Tomi" <tomi.valkeinen@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/shm: properly return EIDRM in shm_lock()

When getting rid of the general ipc_lock(), this was missed furthermore,
making the comment around the ipc object validity check bogus. Under
EIDRM conditions, callers will in turn not see the error and continue
with the operation.

Link: http://lkml.kernel.org/r/20180824030920.GD3677@linux-r8p5
Link: http://lkml.kernel.org/r/20180823024051.GC13343@shao2-debian
Fixes: 82061c57ce9 ("ipc: drop ipc_lock()")
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: filter out hugetlb pages if HUGEPAGE migration is not supported.

When scanning for movable pages, filter out Hugetlb pages if hugepage
migration is not supported. Without this we hit infinte loop in
__offline_pages() where we do

pfn = scan_movable_pages(start_pfn, end_pfn);
if (pfn) { /* We have movable pages */
ret = do_migrate_range(pfn, end_pfn);
goto repeat;
}

Fix this by checking hugepage_migration_supported both in
has_unmovable_pages which is the primary backoff mechanism for page
offlining and for consistency reasons also into scan_movable_pages
because it doesn't make any sense to return a pfn to non-migrateable
huge page.

This issue was revealed by, but not caused by 72b39cfc4d75 ("mm,
memory_hotplug: do not fail offlining too early").

Link: http://lkml.kernel.org/r/20180824063314.21981-1-aneesh.kumar@linux.ibm.com
Fixes: 72b39cfc4d75 ("mm, memory_hotplug: do not fail offlining too early")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Haren Myneni <haren@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/util.c: improve kvfree() kerneldoc

Scooped from an email from Matthew.

Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/page-types.c: fix "defined but not used" warning

debugfs_known_mountpoints[] is not used any more, so let's remove it.

Link: http://lkml.kernel.org/r/1535102651-19418-1-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/slabinfo.c: fix sign-compare warning

Currently we get the following compiler warning:

    slabinfo.c:854:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
       if (s->object_size < min_objsize)
                          ^

due to the mismatch of signed/unsigned comparison.  ->object_size and
->slab_size are never expected to be negative, so let's define them as
unsigned int.

[n-horiguchi@ah.jp.nec.com: convert everything - none of these can be negative]
Link: http://lkml.kernel.org/r/20180826234947.GA9787@hori1.linux.bs1.fc.nec.co.jp
Link: http://lkml.kernel.org/r/1535103134-20239-1-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmemleak: always register debugfs file

If kmemleak built in to the kernel, but is disabled by default, the
debugfs file is never registered.  Because of this, it is not possible
to find out if the kernel is built with kmemleak support by checking for
the presence of this file.  To allow this, always register the file.

After this patch, if the file doesn't exist, kmemleak is not available
in the kernel.  If writing "scan" or any other value than "clear" to
this file results in EBUSY, then kmemleak is available but is disabled
by default and can be activated via the kernel command line.

Catalin: "that's also consistent with a late disabling of kmemleak when
the debugfs entry sticks around."

Link: http://lkml.kernel.org/r/20180824131220.19176-1-vincent.whitchurch@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: respect arch_dup_mmap() return value

Commit d70f2a14b72a ("include/linux/sched/mm.h: uninline mmdrop_async(),
etc") ignored the return value of arch_dup_mmap(). As a result, on x86,
a failure to duplicate the LDT (e.g. due to memory allocation error)
would leave the duplicated memory mapping in an inconsistent state.

Fix by using the return value, as it was before the change.

Link: http://lkml.kernel.org/r/20180823051229.211856-1-namit@vmware.com
Fixes: d70f2a14b72a4 ("include/linux/sched/mm.h: uninline mmdrop_async(), etc")
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, oom: fix missing tlb_finish_mmu() in __oom_reap_task_mm().

Commit 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu
notifiers") has added an ability to skip over vmas with blockable mmu
notifiers. This however didn't call tlb_finish_mmu as it should.

As a result inc_tlb_flush_pending has been called without its pairing
dec_tlb_flush_pending and all callers mm_tlb_flush_pending would flush
even though this is not really needed. This alone is not harmful and it
seems there shouldn't be any such callers for oom victims at all but
there is no real reason to skip tlb_finish_mmu on early skip either so
call it.

[mhocko@suse.com: new changelog]
Link: http://lkml.kernel.org/r/b752d1d5-81ad-7a35-2394-7870641be51c@i-love.sakura.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: print proper OOM header when no eligible victim left

When the memcg OOM killer runs out of killable tasks, it currently
prints a WARN with no further OOM context.  This has caused some user
confusion.

Warnings indicate a kernel problem.  In a reported case, however, the
situation was triggered by a nonsensical memcg configuration (hard limit
set to 0).  But without any VM context this wasn't obvious from the
report, and it took some back and forth on the mailing list to identify
what is actually a trivial issue.

Handle this OOM condition like we handle it in the global OOM killer:
dump the full OOM context and tell the user we ran out of tasks.

This way the user can identify misconfigurations easily by themselves
and rectify the problem - without having to go through the hassle of
running into an obscure but unsettling warning, finding the appropriate
kernel mailing list and waiting for a kernel developer to remote-analyze
that the memcg configuration caused this.

If users cannot make sense of why the OOM killer was triggered or why it
failed, they will still report it to the mailing list, we know that from
experience.  So in case there is an actual kernel bug causing this,
kernel developers will very likely hear about it.

Link: http://lkml.kernel.org/r/20180821160406.22578-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Must perform TXQ teardown before unregistering interfaces in
    mac80211, from Toke Høiland-Jørgensen.

2) Don't allow creating mac80211_hwsim with less than one channel, from
    Johannes Berg.

3) Division by zero in cfg80211, fix from Johannes Berg.

4) Fix endian issue in tipc, from Haiqing Bai.

5) BPF sockmap use-after-free fixes from Daniel Borkmann.

6) Spectre-v1 in mac80211_hwsim, from Jinbum Park.

7) Missing rhashtable_walk_exit() in tipc, from Cong Wang.

8) Revert kvzalloc() conversion of AF_PACKET, it breaks mmap() when
    kvzalloc() tries to use kmalloc() pages. From Eric Dumazet.

9) Fix deadlock in hv_netvsc, from Dexuan Cui.

10) Do not restart timewait timer on RST, from Florian Westphal.

11) Fix double lwstate refcount grab in ipv6, from Alexey Kodanev.

12) Unsolicit report count handling is off-by-one, fix from Hangbin Liu.

13) Sleep-in-atomic in cadence driver, from Jia-Ju Bai.

14) Respect ttl-inherit in ip6 tunnel driver, from Hangbin Liu.

15) Use-after-free in act_ife, fix from Cong Wang.

16) Missing hold to meta module in act_ife, from Vlad Buslov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits)
  net: phy: sfp: Handle unimplemented hwmon limits and alarms
  net: sched: action_ife: take reference to meta module
  act_ife: fix a potential use-after-free
  net/mlx5: Fix SQ offset in QPs with small RQ
  tipc: correct spelling errors for tipc_topsrv_queue_evt() comments
  tipc: correct spelling errors for struct tipc_bc_base's comment
  bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA.
  bnxt_en: Clean up unused functions.
  bnxt_en: Fix firmware signaled resource change logic in open.
  sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabel
  sctp: fix invalid reference to the index variable of the iterator
  net/ibm/emac: wrong emac_calc_base call was used by typo
  net: sched: null actions array pointer before releasing action
  vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition
  r8169: add support for NCube 8168 network card
  ip6_tunnel: respect ttl inherit for ip6tnl
  mac80211: shorten the IBSS debug messages
  mac80211: don't Tx a deauth frame if the AP forbade Tx
  mac80211: Fix station bandwidth setting after channel switch
  mac80211: fix a race between restart and CSA flows
  ...

net: phy: sfp: Handle unimplemented hwmon limits and alarms

Not all SFPs implement the registers containing sensor limits and
alarms. Luckily, there is a bit indicating if they are implemented or
not. Add checking for this bit, when deciding if the hwmon attributes
should be visible.

Fixes: 1323061a018a ("net: phy: sfp: Add HWMON support for module sensors")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: action_ife: take reference to meta module

Recent refactoring of add_metainfo() caused use_all_metadata() to add
metainfo to ife action metalist without taking reference to module. This
causes warning in module_put called from ife action cleanup function.

Implement add_metainfo_and_get_ops() function that returns with reference
to module taken if metainfo was added successfully, and call it from
use_all_metadata(), instead of calling __add_metainfo() directly.

Example warning:

[  646.344393] WARNING: CPU: 1 PID: 2278 at kernel/module.c:1139 module_put+0x1cb/0x230
[  646.352437] Modules linked in: act_meta_skbtcindex act_meta_mark act_meta_skbprio act_ife ife veth nfsv3 nfs fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c tun ebtable_filter ebtables ip6table_filter ip6_tables bridge stp llc mlx5_ib ib_uverbs ib_core intel_rapl sb_edac x86_pkg_temp_thermal mlx5_core coretemp kvm_intel kvm nfsd igb irqbypass crct10dif_pclmul devlink crc32_pclmul mei_me joydev ses crc32c_intel enclosure auth_rpcgss i2c_algo_bit ioatdma ptp mei pps_core ghash_clmulni_intel iTCO_wdt iTCO_vendor_support pcspkr dca ipmi_ssif lpc_ich target_core_mod i2c_i801 ipmi_si ipmi_devintf pcc_cpufreq wmi ipmi_msghandler nfs_acl lockd acpi_pad acpi_power_meter grace sunrpc mpt3sas raid_class scsi_transport_sas
[  646.425631] CPU: 1 PID: 2278 Comm: tc Not tainted 4.19.0-rc1+ #799
[  646.432187] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[  646.440595] RIP: 0010:module_put+0x1cb/0x230
[  646.445238] Code: f3 66 94 02 e8 26 ff fa ff 85 c0 74 11 0f b6 1d 51 30 94 02 80 fb 01 77 60 83 e3 01 74 13 65 ff 0d 3a 83 db 73 e9 2b ff ff ff <0f> 0b e9 00 ff ff ff e8 59 01 fb ff 85 c0 75 e4 48 c7 c2 20 62 6b
[  646.464997] RSP: 0018:ffff880354d37068 EFLAGS: 00010286
[  646.470599] RAX: 0000000000000000 RBX: ffffffffc0a52518 RCX: ffffffff8c2668db
[  646.478118] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffc0a52518
[  646.485641] RBP: ffffffffc0a52180 R08: fffffbfff814a4a4 R09: fffffbfff814a4a3
[  646.493164] R10: ffffffffc0a5251b R11: fffffbfff814a4a4 R12: 1ffff1006a9a6e0d
[  646.500687] R13: 00000000ffffffff R14: ffff880362bab890 R15: dead000000000100
[  646.508213] FS:  00007f4164c99800(0000) GS:ffff88036fe40000(0000) knlGS:0000000000000000
[  646.516961] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  646.523080] CR2: 00007f41638b8420 CR3: 0000000351df0004 CR4: 00000000001606e0
[  646.530595] Call Trace:
[  646.533408]  ? find_symbol_in_section+0x260/0x260
[  646.538509]  tcf_ife_cleanup+0x11b/0x200 [act_ife]
[  646.543695]  tcf_action_cleanup+0x29/0xa0
[  646.548078]  __tcf_action_put+0x5a/0xb0
[  646.552289]  ? nla_put+0x65/0xe0
[  646.555889]  __tcf_idr_release+0x48/0x60
[  646.560187]  tcf_generic_walker+0x448/0x6b0
[  646.564764]  ? tcf_action_dump_1+0x450/0x450
[  646.569411]  ? __lock_is_held+0x84/0x110
[  646.573720]  ? tcf_ife_walker+0x10c/0x20f [act_ife]
[  646.578982]  tca_action_gd+0x972/0xc40
[  646.583129]  ? tca_get_fill.constprop.17+0x250/0x250
[  646.588471]  ? mark_lock+0xcf/0x980
[  646.592324]  ? check_chain_key+0x140/0x1f0
[  646.596832]  ? debug_show_all_locks+0x240/0x240
[  646.601839]  ? memset+0x1f/0x40
[  646.605350]  ? nla_parse+0xca/0x1a0
[  646.609217]  tc_ctl_action+0x215/0x230
[  646.613339]  ? tcf_action_add+0x220/0x220
[  646.617748]  rtnetlink_rcv_msg+0x56a/0x6d0
[  646.622227]  ? rtnl_fdb_del+0x3f0/0x3f0
[  646.626466]  netlink_rcv_skb+0x18d/0x200
[  646.630752]  ? rtnl_fdb_del+0x3f0/0x3f0
[  646.634959]  ? netlink_ack+0x500/0x500
[  646.639106]  netlink_unicast+0x2d0/0x370
[  646.643409]  ? netlink_attachskb+0x340/0x340
[  646.648050]  ? _copy_from_iter_full+0xe9/0x3e0
[  646.652870]  ? import_iovec+0x11e/0x1c0
[  646.657083]  netlink_sendmsg+0x3b9/0x6a0
[  646.661388]  ? netlink_unicast+0x370/0x370
[  646.665877]  ? netlink_unicast+0x370/0x370
[  646.670351]  sock_sendmsg+0x6b/0x80
[  646.674212]  ___sys_sendmsg+0x4a1/0x520
[  646.678443]  ? copy_msghdr_from_user+0x210/0x210
[  646.683463]  ? lock_downgrade+0x320/0x320
[  646.687849]  ? debug_show_all_locks+0x240/0x240
[  646.692760]  ? do_raw_spin_unlock+0xa2/0x130
[  646.697418]  ? _raw_spin_unlock+0x24/0x30
[  646.701798]  ? __handle_mm_fault+0x1819/0x1c10
[  646.706619]  ? __pmd_alloc+0x320/0x320
[  646.710738]  ? debug_show_all_locks+0x240/0x240
[  646.715649]  ? restore_nameidata+0x7b/0xa0
[  646.720117]  ? check_chain_key+0x140/0x1f0
[  646.724590]  ? check_chain_key+0x140/0x1f0
[  646.729070]  ? __fget_light+0xbc/0xd0
[  646.733121]  ? __sys_sendmsg+0xd7/0x150
[  646.737329]  __sys_sendmsg+0xd7/0x150
[  646.741359]  ? __ia32_sys_shutdown+0x30/0x30
[  646.746003]  ? up_read+0x53/0x90
[  646.749601]  ? __do_page_fault+0x484/0x780
[  646.754105]  ? do_syscall_64+0x1e/0x2c0
[  646.758320]  do_syscall_64+0x72/0x2c0
[  646.762353]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  646.767776] RIP: 0033:0x7f4163872150
[  646.771713] Code: 8b 15 3c 7d 2b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 83 3d b9 d5 2b 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be cd 00 00 48 89 04 24
[  646.791474] RSP: 002b:00007ffdef7d6b58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  646.799721] RAX: ffffffffffffffda RBX: 0000000000000024 RCX: 00007f4163872150
[  646.807240] RDX: 0000000000000000 RSI: 00007ffdef7d6bd0 RDI: 0000000000000003
[  646.814760] RBP: 000000005b8b9482 R08: 0000000000000001 R09: 0000000000000000
[  646.822286] R10: 00000000000005e7 R11: 0000000000000246 R12: 00007ffdef7dad20
[  646.829807] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000679bc0
[  646.837360] irq event stamp: 6083
[  646.841043] hardirqs last  enabled at (6081): [<ffffffff8c220a7d>] __call_rcu+0x17d/0x500
[  646.849882] hardirqs last disabled at (6083): [<ffffffff8c004f06>] trace_hardirqs_off_thunk+0x1a/0x1c
[  646.859775] softirqs last  enabled at (5968): [<ffffffff8d4004a1>] __do_softirq+0x4a1/0x6ee
[  646.868784] softirqs last disabled at (6082): [<ffffffffc0a78759>] tcf_ife_cleanup+0x39/0x200 [act_ife]
[  646.878845] ---[ end trace b1b8c12ffe51e657 ]---

Fixes: 5ffe57da29b3 ("act_ife: fix a potential deadlock")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

act_ife: fix a potential use-after-free

Immediately after module_put(), user could delete this
module, so e->ops could be already freed before we call
e->ops->release().

Fix this by moving module_put() after ops->release().

Fixes: ef6980b6becb ("introduce IFE action")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5: Fix SQ offset in QPs with small RQ

Correct the formula for calculating the RQ page remainder,
which should be in byte granularity. The result will be
non-zero only for RQs smaller than PAGE_SIZE, as an RQ size
is a power of 2.

Divide this by the SQ stride (MLX5_SEND_WQE_BB) to get the
SQ offset in strides granularity.

Fixes: d7037ad73daa ("net/mlx5: Fix QP fragmented buffer allocation")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nbd: don't allow invalid blocksize settings

syzbot reports a divide-by-zero off the NBD_SET_BLKSIZE ioctl.
We need proper validation of the input here. Not just if it's
zero, but also if the value is a power-of-2 and in a valid
range. Add that.

Cc: stable@vger.kernel.org
Reported-by: syzbot <syzbot+25dbecbec1e62c6b0dd4@syzkaller.appspotmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nds32: fix build error because of wrong semicolon

It shall be removed in the define usage. We shall not put a semicolon there.

/kisskb/src/arch/nds32/include/asm/elf.h:126:29: error: expected '}' before ';' token
#define ELF_DATA ELFDATA2LSB;
                             ^
/kisskb/src/fs/proc/kcore.c:318:17: note: in expansion of macro 'ELF_DATA'
     [EI_DATA] = ELF_DATA,
                 ^~~~~~~~
/kisskb/src/fs/proc/kcore.c:312:15: note: to match this '{'
    .e_ident = {
               ^
/kisskb/src/scripts/Makefile.build:307: recipe for target 'fs/proc/kcore.o' failed

Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: Only print one page of stack when die to prevent printing too much information.

It may print too much information sometimes if the stack is wrong or
too big. This patch can limit the debug information in a page of stack.

Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: Add macro definition for offset of lp register on stack

Use macro to replace the magic number.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: Remove the deprecated ABI implementation

We are not using NDS32 ABI 2 for now, just remove the preprocessor
directives __NDS32_ABI_2.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32/stack: Get real return address by using ftrace_graph_ret_addr

Function graph tracer has modified the return address to
'return_to_handler' on stack, and provide the 'ftrace_graph_ret_addr' to
get the real return address.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32/ftrace: Support dynamic function graph tracer

This patch contains the implementation of dynamic function graph tracer.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32/ftrace: Support dynamic function tracer

This patch contains the implementation of dynamic function tracer.
The mcount call is composed of three instructions, so there are three
nop for enough placeholder.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32/ftrace: Add RECORD_MCOUNT support

Recognize NDS32 object files in recordmcount.pl.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32/ftrace: Support static function graph tracer

This patch contains implementation of static function graph tracer.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32/ftrace: Support static function tracer

This patch support the static function tracer. On nds32 ABI, we need to
always push return address to stack for __builtin_return_address can
work correctly, otherwise, it will get the wrong value of $lp at leaf
function.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: Extract the checking and getting pointer to a macro

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: Clean up the coding style

1. Adjust indentation.
2. Unify argument name of each macro.
3. Add space after comma in parameters list.
4. Add space after 'if' keyword.
5. Replace space by tab.
6. Change asm volatile to __asm__ __volatile__

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: Fix get_user/put_user macro expand pointer problem

The pointer argument of macro need to be taken out once first, and then
use the new pointer in the macro body.

In kernel/trace/trace.c, get_user(ch, ubuf++) causes the unexpected
increment after expand the macro.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: Fix empty call trace

The compiler predefined macro 'NDS32_ABI_2' had been removed, it should
use the '__NDS32_ABI_2' here.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: add NULL entry to the end of_device_id array

Make sure of_device_id tables are NULL terminated.
Found by coccinelle spatch "misc/of_table.cocci"

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: fix logic for module

This bug is report by Dan Carpenter. We shall use ~loc_mask instead of
!loc_mask because we need to and(&) the bits of ~loc_mask.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: c9a4a8da6baa ("nds32: Loadable modules")
Signed-off-by: Greentime Hu <greentime@andestech.com>

Merge tag 'mac80211-for-davem-2018-09-03' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Here are quite a large number of fixes, notably:
* various A-MSDU building fixes (currently only affects mt76)
* syzkaller & spectre fixes in hwsim
* TXQ vs. teardown fix that was causing crashes
* embed WMM info in reg rule, bad code here had been causing crashes
* one compilation issue with fix from Arnd (rfkill-gpio includes)
* fixes for a race and bad data during/after channel switch
* nl80211: a validation fix, attribute type & unit fixes
along with other small fixes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: correct spelling errors for tipc_topsrv_queue_evt() comments

tipc_conn_queue_evt -> tipc_topsrv_queue_evt
tipc_send_work -> tipc_conn_send_work
tipc_send_to_sock -> tipc_conn_send_to_sock

Signed-off-by: Zhenbo Gao <zhenbo.gao@windriver.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: correct spelling errors for struct tipc_bc_base's comment

Trivial fix for two spelling mistakes.

Signed-off-by: Zhenbo Gao <zhenbo.gao@windriver.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bnxt_en-Bug-fixes'

Michael Chan says:

====================
bnxt_en: Bug fixes.

This short series fixes resource related logic in the driver, mostly
affecting the RDMA driver under corner cases.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA.

Currently, the driver adjusts the bp->hw_resc.max_cp_rings by the number
of MSIX vectors used by RDMA. There is one code path in open that needs
to check the true max_cp_rings including any used by RDMA. This code
is now checking for the reduced max_cp_rings which will fail when the
number of cp rings is very small.

To fix this in a clean way, we don't adjust max_cp_rings anymore.
Instead, we add a helper bnxt_get_max_func_cp_rings_for_en() to get the
reduced max_cp_rings when appropriate.

Fixes: ec86f14ea506 ("bnxt_en: Add ULP calls to stop and restart IRQs.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Clean up unused functions.

Remove unused bnxt_subtract_ulp_resources(). Change
bnxt_get_max_func_irqs() to static since it is only locally used.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix firmware signaled resource change logic in open.

When the driver detects that resources have changed during open, it
should reset the rx and tx rings to 0.  This will properly setup the
init sequence to initialize the default rings again.  We also need
to signal the RDMA driver to stop and clear its interrupts.  We then
call the RoCE driver to restart if a new set of default rings is
successfully reserved.

Fixes: 25e1acd6b92b ("bnxt_en: Notify firmware about IF state changes.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sctp-two-fixes-for-spp_ipv6_flowlabel-and-spp_dscp-sockopts'

Xin Long says:

====================
sctp: two fixes for spp_ipv6_flowlabel and spp_dscp sockopts

This patchset fixes two problems in sctp_apply_peer_addr_params()
when setting spp_ipv6_flowlabel or spp_dscp.
====================

Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabel

When users set params.spp_address and get a trans, ipv6_flowlabel flag
should be applied into this trans. But even if this one is not an ipv6
trans, it should not go to apply it into all other transes of the asoc
but simply ignore it.

Fixes: 0b0dce7a36fb ("sctp: add spp_ipv6_flowlabel and spp_dscp for sctp_paddrparams")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix invalid reference to the index variable of the iterator

Now in sctp_apply_peer_addr_params(), if SPP_IPV6_FLOWLABEL flag is set
and trans is NULL, it would use trans as the index variable to traverse
transport_addr_list, then trans is set as the last transport of it.

Later, if SPP_DSCP flag is set, it would enter into the wrong branch as
trans is actually an invalid reference.

So fix it by using a new index variable to traverse transport_addr_list
for both SPP_DSCP and SPP_IPV6_FLOWLABEL flags process.

Fixes: 0b0dce7a36fb ("sctp: add spp_ipv6_flowlabel and spp_dscp for sctp_paddrparams")
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ibm/emac: wrong emac_calc_base call was used by typo

__emac_calc_base_mr1 was used instead of __emac4_calc_base_mr1
by copy-paste mistake for emac4syn.

Fixes: 45d6e545505fd32edb812f085be7de45b6a5c0af ("net/ibm/emac: add 8192 rx/tx fifo size")
Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: null actions array pointer before releasing action

Currently, tcf_action_delete() nulls actions array pointer after putting
and deleting it. However, if tcf_idr_delete_index() returns an error,
pointer to action is not set to null. That results it being released second
time in error handling code of tca_action_gd().

Kasan error:

[  807.367755] ==================================================================
[  807.375844] BUG: KASAN: use-after-free in tc_setup_cb_call+0x14e/0x250
[  807.382763] Read of size 8 at addr ffff88033e636000 by task tc/2732

[  807.391289] CPU: 0 PID: 2732 Comm: tc Tainted: G        W         4.19.0-rc1+ #799
[  807.399542] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[  807.407948] Call Trace:
[  807.410763]  dump_stack+0x92/0xeb
[  807.414456]  print_address_description+0x70/0x360
[  807.419549]  kasan_report+0x14d/0x300
[  807.423582]  ? tc_setup_cb_call+0x14e/0x250
[  807.428150]  tc_setup_cb_call+0x14e/0x250
[  807.432539]  ? nla_put+0x65/0xe0
[  807.436146]  fl_dump+0x394/0x3f0 [cls_flower]
[  807.440890]  ? fl_tmplt_dump+0x140/0x140 [cls_flower]
[  807.446327]  ? lock_downgrade+0x320/0x320
[  807.450702]  ? lock_acquire+0xe2/0x220
[  807.454819]  ? is_bpf_text_address+0x5/0x140
[  807.459475]  ? memcpy+0x34/0x50
[  807.462980]  ? nla_put+0x65/0xe0
[  807.466582]  tcf_fill_node+0x341/0x430
[  807.470717]  ? tcf_block_put+0xe0/0xe0
[  807.474859]  tcf_node_dump+0xdb/0xf0
[  807.478821]  fl_walk+0x8e/0x170 [cls_flower]
[  807.483474]  tcf_chain_dump+0x35a/0x4d0
[  807.487703]  ? tfilter_notify+0x170/0x170
[  807.492091]  ? tcf_fill_node+0x430/0x430
[  807.496411]  tc_dump_tfilter+0x362/0x3f0
[  807.500712]  ? tc_del_tfilter+0x850/0x850
[  807.505104]  ? kasan_unpoison_shadow+0x30/0x40
[  807.509940]  ? __mutex_unlock_slowpath+0xcf/0x410
[  807.515031]  netlink_dump+0x263/0x4f0
[  807.519077]  __netlink_dump_start+0x2a0/0x300
[  807.523817]  ? tc_del_tfilter+0x850/0x850
[  807.528198]  rtnetlink_rcv_msg+0x46a/0x6d0
[  807.532671]  ? rtnl_fdb_del+0x3f0/0x3f0
[  807.536878]  ? tc_del_tfilter+0x850/0x850
[  807.541280]  netlink_rcv_skb+0x18d/0x200
[  807.545570]  ? rtnl_fdb_del+0x3f0/0x3f0
[  807.549773]  ? netlink_ack+0x500/0x500
[  807.553913]  netlink_unicast+0x2d0/0x370
[  807.558212]  ? netlink_attachskb+0x340/0x340
[  807.562855]  ? _copy_from_iter_full+0xe9/0x3e0
[  807.567677]  ? import_iovec+0x11e/0x1c0
[  807.571890]  netlink_sendmsg+0x3b9/0x6a0
[  807.576192]  ? netlink_unicast+0x370/0x370
[  807.580684]  ? netlink_unicast+0x370/0x370
[  807.585154]  sock_sendmsg+0x6b/0x80
[  807.589015]  ___sys_sendmsg+0x4a1/0x520
[  807.593230]  ? copy_msghdr_from_user+0x210/0x210
[  807.598232]  ? do_wp_page+0x174/0x880
[  807.602276]  ? __handle_mm_fault+0x749/0x1c10
[  807.607021]  ? __handle_mm_fault+0x1046/0x1c10
[  807.611849]  ? __pmd_alloc+0x320/0x320
[  807.615973]  ? check_chain_key+0x140/0x1f0
[  807.620450]  ? check_chain_key+0x140/0x1f0
[  807.624929]  ? __fget_light+0xbc/0xd0
[  807.628970]  ? __sys_sendmsg+0xd7/0x150
[  807.633172]  __sys_sendmsg+0xd7/0x150
[  807.637201]  ? __ia32_sys_shutdown+0x30/0x30
[  807.641846]  ? up_read+0x53/0x90
[  807.645442]  ? __do_page_fault+0x484/0x780
[  807.649949]  ? do_syscall_64+0x1e/0x2c0
[  807.654164]  do_syscall_64+0x72/0x2c0
[  807.658198]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  807.663625] RIP: 0033:0x7f42e9870150
[  807.667568] Code: 8b 15 3c 7d 2b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 83 3d b9 d5 2b 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be cd 00 00 48 89 04 24
[  807.687328] RSP: 002b:00007ffdbf595b58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  807.695564] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f42e9870150
[  807.703083] RDX: 0000000000000000 RSI: 00007ffdbf595b80 RDI: 0000000000000003
[  807.710605] RBP: 00007ffdbf599d90 R08: 0000000000679bc0 R09: 000000000000000f
[  807.718127] R10: 00000000000005e7 R11: 0000000000000246 R12: 00007ffdbf599d88
[  807.725651] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

[  807.735048] Allocated by task 2687:
[  807.738902]  kasan_kmalloc+0xa0/0xd0
[  807.742852]  __kmalloc+0x118/0x2d0
[  807.746615]  tcf_idr_create+0x44/0x320
[  807.750738]  tcf_nat_init+0x41e/0x530 [act_nat]
[  807.755638]  tcf_action_init_1+0x4e0/0x650
[  807.760104]  tcf_action_init+0x1ce/0x2d0
[  807.764395]  tcf_exts_validate+0x1d8/0x200
[  807.768861]  fl_change+0x55a/0x26b4 [cls_flower]
[  807.773845]  tc_new_tfilter+0x748/0xa20
[  807.778051]  rtnetlink_rcv_msg+0x56a/0x6d0
[  807.782517]  netlink_rcv_skb+0x18d/0x200
[  807.786804]  netlink_unicast+0x2d0/0x370
[  807.791095]  netlink_sendmsg+0x3b9/0x6a0
[  807.795387]  sock_sendmsg+0x6b/0x80
[  807.799240]  ___sys_sendmsg+0x4a1/0x520
[  807.803445]  __sys_sendmsg+0xd7/0x150
[  807.807473]  do_syscall_64+0x72/0x2c0
[  807.811506]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

[  807.818776] Freed by task 2728:
[  807.822283]  __kasan_slab_free+0x122/0x180
[  807.826752]  kfree+0xf4/0x2f0
[  807.830080]  __tcf_action_put+0x5a/0xb0
[  807.834281]  tcf_action_put_many+0x46/0x70
[  807.838747]  tca_action_gd+0x232/0xc40
[  807.842862]  tc_ctl_action+0x215/0x230
[  807.846977]  rtnetlink_rcv_msg+0x56a/0x6d0
[  807.851444]  netlink_rcv_skb+0x18d/0x200
[  807.855731]  netlink_unicast+0x2d0/0x370
[  807.860021]  netlink_sendmsg+0x3b9/0x6a0
[  807.864312]  sock_sendmsg+0x6b/0x80
[  807.868166]  ___sys_sendmsg+0x4a1/0x520
[  807.872372]  __sys_sendmsg+0xd7/0x150
[  807.876401]  do_syscall_64+0x72/0x2c0
[  807.880431]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

[  807.887704] The buggy address belongs to the object at ffff88033e636000
                which belongs to the cache kmalloc-256 of size 256
[  807.900909] The buggy address is located 0 bytes inside of
                256-byte region [ffff88033e636000, ffff88033e636100)
[  807.913155] The buggy address belongs to the page:
[  807.918322] page:ffffea000cf98d80 count:1 mapcount:0 mapping:ffff88036f80ee00 index:0x0 compound_mapcount: 0
[  807.928831] flags: 0x5fff8000008100(slab|head)
[  807.933647] raw: 005fff8000008100 ffffea000db44f00 0000000400000004 ffff88036f80ee00
[  807.942050] raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000
[  807.950456] page dumped because: kasan: bad access detected

[  807.958240] Memory state around the buggy address:
[  807.963405]  ffff88033e635f00: fc fc fc fc fb fb fb fb fb fb fb fc fc fc fc fb
[  807.971288]  ffff88033e635f80: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
[  807.979166] >ffff88033e636000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  807.994882]                    ^
[  807.998477]  ffff88033e636080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  808.006352]  ffff88033e636100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
[  808.014230] ==================================================================
[  808.022108] Disabling lock debugging due to kernel taint

Fixes: edfaf94fa705 ("net_sched: improve and refactor tcf_action_put_many()")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition

The _IOC_READ flag fits this ioctl request more because this request
actually only writes to, but doesn't read from userspace.
See NOTEs in include/uapi/asm-generic/ioctl.h for more information.

Fixes: 429711aec282 ("vhost: switch to use new message format")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: add support for NCube 8168 network card

This card identifies itself as:
Ethernet controller [0200]: NCube Device [10ff:8168] (rev 06)
Subsystem: TP-LINK Technologies Co., Ltd. Device [7470:3468]

Adding a new entry to rtl8169_pci_tbl makes the card work.

Link: http://launchpad.net/bugs/1788730
Signed-off-by: Anthony Wong <anthony.wong@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_tunnel: respect ttl inherit for ip6tnl

man ip-tunnel ttl section says:
0 is a special value meaning that packets inherit the TTL value.

IPv4 tunnel respect this in ip_tunnel_xmit(), but IPv6 tunnel has not
implement it yet. To make IPv6 behave consistently with IP tunnel,
add ipv6 tunnel inherit support.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

apparmor: fix bad debug check in apparmor_secid_to_secctx()

apparmor_secid_to_secctx() has a bad debug statement tripping on a
condition handle by the code. When kconfig SECURITY_APPARMOR_DEBUG is
enabled the debug WARN_ON will trip when **secdata is NULL resulting
in the following trace.

------------[ cut here ]------------
AppArmor WARN apparmor_secid_to_secctx: ((!secdata)):
WARNING: CPU: 0 PID: 14826 at security/apparmor/secid.c:82 apparmor_secid_to_secctx+0x2b5/0x2f0 security/apparmor/secid.c:82
Kernel panic - not syncing: panic_on_warn set ...

CPU: 0 PID: 14826 Comm: syz-executor1 Not tainted 4.19.0-rc1+ #193
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
panic+0x238/0x4e7 kernel/panic.c:184
__warn.cold.8+0x163/0x1ba kernel/panic.c:536
report_bug+0x252/0x2d0 lib/bug.c:186
fixup_bug arch/x86/kernel/traps.c:178 [inline]
do_error_trap+0x1fc/0x4d0 arch/x86/kernel/traps.c:296
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:316
invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:993
RIP: 0010:apparmor_secid_to_secctx+0x2b5/0x2f0 security/apparmor/secid.c:82
Code: c7 c7 40 66 58 87 e8 6a 6d 0f fe 0f 0b e9 6c fe ff ff e8 3e aa 44 fe 48 c7 c6 80 67 58 87 48 c7 c7 a0 65 58 87 e8 4b 6d 0f fe <0f> 0b e9 3f fe ff ff 48 89 df e8 fc a7 83 fe e9 ed fe ff ff bb f4
RSP: 0018:ffff8801ba1bed10 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff8801ba1beed0 RCX: ffffc9000227e000
RDX: 0000000000018482 RSI: ffffffff8163ac01 RDI: 0000000000000001
RBP: ffff8801ba1bed30 R08: ffff8801b80ec080 R09: ffffed003b603eca
R10: ffffed003b603eca R11: ffff8801db01f657 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000000000 R15: ffff8801ba1beed0
security_secid_to_secctx+0x63/0xc0 security/security.c:1314
ctnetlink_secctx_size net/netfilter/nf_conntrack_netlink.c:621 [inline]
ctnetlink_nlmsg_size net/netfilter/nf_conntrack_netlink.c:659 [inline]
ctnetlink_conntrack_event+0x303/0x1470 net/netfilter/nf_conntrack_netlink.c:706
nf_conntrack_eventmask_report+0x55f/0x930 net/netfilter/nf_conntrack_ecache.c:151
nf_conntrack_event_report include/net/netfilter/nf_conntrack_ecache.h:112 [inline]
nf_ct_delete+0x33c/0x5d0 net/netfilter/nf_conntrack_core.c:601
nf_ct_iterate_cleanup+0x48c/0x5e0 net/netfilter/nf_conntrack_core.c:1892
nf_ct_iterate_cleanup_net+0x23c/0x2d0 net/netfilter/nf_conntrack_core.c:1974
ctnetlink_flush_conntrack net/netfilter/nf_conntrack_netlink.c:1226 [inline]
ctnetlink_del_conntrack+0x66c/0x850 net/netfilter/nf_conntrack_netlink.c:1258
nfnetlink_rcv_msg+0xd88/0x1070 net/netfilter/nfnetlink.c:228
netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454
nfnetlink_rcv+0x1c0/0x4d0 net/netfilter/nfnetlink.c:560
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343
netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:631
___sys_sendmsg+0x7fd/0x930 net/socket.c:2114
__sys_sendmsg+0x11d/0x290 net/socket.c:2152
__do_sys_sendmsg net/socket.c:2161 [inline]
__se_sys_sendmsg net/socket.c:2159 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2159
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457089
Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f7bc6e03c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f7bc6e046d4 RCX: 0000000000457089
RDX: 0000000000000000 RSI: 0000000020d65000 RDI: 0000000000000003
RBP: 00000000009300a0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000004d4588 R14: 00000000004c8d5c R15: 0000000000000000
Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: disabled
Rebooting in 86400 seconds..

CC: <stable@vger.kernel.org> #4.18
Fixes: c092921219d2 ("apparmor: add support for mapping secids and using secctxes")
Reported-by: syzbot+21016130b0580a9de3b5@syzkaller.appspotmail.com
Signed-off-by: John Johansen <john.johansen@canonical.com>

mac80211: shorten the IBSS debug messages

When tracing is enabled, all the debug messages are recorded and must
not exceed MAX_MSG_LEN (100) columns. Longer debug messages grant the
user with:

WARNING: CPU: 3 PID: 32642 at /tmp/wifi-core-20180806094828/src/iwlwifi-stack-dev/net/mac80211/./trace_msg.h:32 trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211]
Workqueue: phy1 ieee80211_iface_work [mac80211]
RIP: 0010:trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211]
Call Trace:
  __sdata_dbg+0xbd/0x120 [mac80211]
  ieee80211_ibss_rx_queued_mgmt+0x15f/0x510 [mac80211]
  ieee80211_iface_work+0x21d/0x320 [mac80211]

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: don't Tx a deauth frame if the AP forbade Tx

If the driver fails to properly prepare for the channel
switch, mac80211 will disconnect. If the CSA IE had mode
set to 1, it means that the clients are not allowed to send
any Tx on the current channel, and that includes the
deauthentication frame.

Make sure that we don't send the deauthentication frame in
this case.

In iwlwifi, this caused a failure to flush queues since the
firmware already closed the queues after having parsed the
CSA IE. Then mac80211 would wait until the deauthentication
frame would go out (drv_flush(drop=false)) and that would
never happen.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: Fix station bandwidth setting after channel switch

When performing a channel switch flow for a managed interface, the
flow did not update the bandwidth of the AP station and the rate
scale algorithm. In case of a channel width downgrade, this would
result with the rate scale algorithm using a bandwidth that does not
match the interface channel configuration.

Fix this by updating the AP station bandwidth and rate scaling algorithm
before the actual channel change in case of a bandwidth downgrade, or
after the actual channel change in case of a bandwidth upgrade.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: fix a race between restart and CSA flows

We hit a problem with iwlwifi that was caused by a bug in
mac80211. A bug in iwlwifi caused the firwmare to crash in
certain cases in channel switch. Because of that bug,
drv_pre_channel_switch would fail and trigger the restart
flow.
Now we had the hw restart worker which runs on the system's
workqueue and the csa_connection_drop_work worker that runs
on mac80211's workqueue that can run together. This is
obviously problematic since the restart work wants to
reconfigure the connection, while the csa_connection_drop_work
worker does the exact opposite: it tries to disconnect.

Fix this by cancelling the csa_connection_drop_work worker
in the restart worker.

Note that this can sound racy: we could have:

driver   iface_work   CSA_work   restart_work
+++++++++++++++++++++++++++++++++++++++++++++
              |
<--drv_cs ---|
<FW CRASH!>
-CS FAILED-->
              |                       |
              |                 cancel_work(CSA)
           schedule                   |
           CSA work                   |
                         |            |
                        Race between those 2

But this is not possible because we flush the workqueue
in the restart worker before we cancel the CSA worker.
That would be bullet proof if we could guarantee that
we schedule the CSA worker only from the iface_work
which runs on the workqueue (and not on the system's
workqueue), but unfortunately we do have an instance
in which we schedule the CSA work outside the context
of the workqueue (ieee80211_chswitch_done).

Note also that we should probably cancel other workers
like beacon_connection_loss_work and possibly others
for different types of interfaces, at the very least,
IBSS should suffer from the exact same problem, but for
now, do the minimum to fix the actual bug that was actually
experienced and reproduced.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: fix WMM TXOP calculation

In commit 9236c4523e5b ("mac80211: limit wmm params to comply
with ETSI requirements"), we have limited the WMM parameters to
comply with 802.11 and ETSI standard. Mistakenly the TXOP value
was caluclated wrong. Fix it by taking the minimum between
802.11 to ETSI to make sure we are not violating both.

Fixes: e552af058148 ("mac80211: limit wmm params to comply with ETSI requirements")
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: fix a type issue in ieee80211_chandef_to_operating_class()

The "chandef->center_freq1" variable is a u32 but "freq" is a u16 so we
are truncating away the high bits.  I noticed this bug because in commit
9cf0a0b4b64a ("cfg80211: Add support for 60GHz band channels 5 and 6")
we made "freq <= 56160 + 2160 * 6" a valid requency when before it was
only "freq <= 56160 + 2160 * 4" that was valid.  It introduces a static
checker warning:

    net/wireless/util.c:1571 ieee80211_chandef_to_operating_class()
    warn: always true condition '(freq <= 56160 + 2160 * 6) => (0-u16max <= 69120)'

But really we probably shouldn't have been truncating the high bits
away to begin with.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: fix an off-by-one issue in A-MSDU max_subframe computation

Initialize 'n' to 2 in order to take into account also the first
packet in the estimation of max_subframe limit for a given A-MSDU
since frag_tail pointer is NULL when ieee80211_amsdu_aggregate
routine analyzes the second frame.

Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge tag 'dma-mapping-4.19-2' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fixes from Christoph Hellwig:
"A few fixes for the fallout of being a little more pedantic about dma
  masks"

* tag 'dma-mapping-4.19-2' of git://git.infradead.org/users/hch/dma-mapping:
  of/platform: initialise AMBA default DMA masks
  sparc: set a default 32-bit dma mask for OF devices
  kernel/dma/direct: take DMA offset into account in dma_direct_supported

uapi: Fix linux/rds.h userspace compilation errors.

Include linux/in6.h for struct in6_addr.

/usr/include/linux/rds.h:156:18: error: field ‘laddr’ has incomplete type
  struct in6_addr laddr;
                  ^~~~~
/usr/include/linux/rds.h:157:18: error: field ‘faddr’ has incomplete type
  struct in6_addr faddr;
                  ^~~~~
/usr/include/linux/rds.h:178:18: error: field ‘laddr’ has incomplete type
  struct in6_addr laddr;
                  ^~~~~
/usr/include/linux/rds.h:179:18: error: field ‘faddr’ has incomplete type
  struct in6_addr faddr;
                  ^~~~~
/usr/include/linux/rds.h:198:18: error: field ‘bound_addr’ has incomplete type
  struct in6_addr bound_addr;
                  ^~~~~~~~~~
/usr/include/linux/rds.h:199:18: error: field ‘connected_addr’ has incomplete type
  struct in6_addr connected_addr;
                  ^~~~~~~~~~~~~~
/usr/include/linux/rds.h:219:18: error: field ‘local_addr’ has incomplete type
  struct in6_addr local_addr;
                  ^~~~~~~~~~
/usr/include/linux/rds.h:221:18: error: field ‘peer_addr’ has incomplete type
  struct in6_addr peer_addr;
                  ^~~~~~~~~
/usr/include/linux/rds.h:245:18: error: field ‘src_addr’ has incomplete type
  struct in6_addr src_addr;
                  ^~~~~~~~
/usr/include/linux/rds.h:246:18: error: field ‘dst_addr’ has incomplete type
  struct in6_addr dst_addr;
                  ^~~~~~~~

Fixes: b7ff8b1036f0 ("rds: Extend RDS API for IPv6 support")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: cadence: Fix a sleep-in-atomic-context bug in macb_halt_tx()

The kernel module may sleep with holding a spinlock.

The function call paths (from bottom to top) in Linux-4.16 are:

[FUNC] usleep_range
drivers/net/ethernet/cadence/macb_main.c, 648:
usleep_range in macb_halt_tx
drivers/net/ethernet/cadence/macb_main.c, 730:
macb_halt_tx in macb_tx_error_task
drivers/net/ethernet/cadence/macb_main.c, 721:
_raw_spin_lock_irqsave in macb_tx_error_task

To fix this bug, usleep_range() is replaced with udelay().

This bug is found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2018-09-02

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix one remaining buggy offset override in sockmap's bpf_msg_pull_data()
   when linearizing multiple scatterlist elements, from Tushar.

2) Fix BPF sockmap's misuse of ULP when a collision with another ULP is
   found on map update where it would release existing ULP. syzbot found and
   triggered this couple of times now, fix from John.

3) Add missing xskmap type to bpftool so it will properly show the type
   on map dump, from Prashant.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Linux 4.19-rc2

net/ipv6: Only update MTU metric if it set

Jan reported a regression after an update to 4.18.5. In this case ipv6
default route is setup by systemd-networkd based on data from an RA. The
RA contains an MTU of 1492 which is used when the route is first inserted
but then systemd-networkd pushes down updates to the default route
without the mtu set.

Prior to the change to fib6_info, metrics such as MTU were held in the
dst_entry and rt6i_pmtu in rt6_info contained an update to the mtu if
any. ip6_mtu would look at rt6i_pmtu first and use it if set. If not,
the value from the metrics is used if it is set and finally falling
back to the idev value.

After the fib6_info change metrics are contained in the fib6_info struct
and there is no equivalent to rt6i_pmtu. To maintain consistency with
the old behavior the new code should only reset the MTU in the metrics
if the route update has it set.

Fixes: d4ead6b34b67 ("net/ipv6: move metrics from dst to rt6_info")
Reported-by: Jan Janssen <medhefgo@web.de>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: cpsw-phy-sel: prefer phandle for phy sel

The cpsw-phy-sel device is not a child of the cpsw interconnect target
module. It lives in the system control module.

Let's fix this issue by trying to use cpsw-phy-sel phandle first if it
exists and if not fall back to current usage of trying to find the
cpsw-phy-sel child. That way the phy sel driver can be a child of the
system control module where it belongs in the device tree.

Without this fix, we cannot have a proper interconnect target module
hierarchy in device tree for things like genpd.

Note that deferred probe is mostly not supported by cpsw and this patch
does not attempt to fix that. In case deferred probe support is needed,
this could be added to cpsw_slave_open() and phy_connect() so they start
handling and returning errors.

For documenting it, looks like the cpsw-phy-sel is used for all cpsw device
tree nodes. It's missing the related binding documentation, so let's also
update the binding documentation accordingly.

Cc: devicetree@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: cpsw: Document cpsw-phy-sel usage but prefer phandle

The current cpsw usage for cpsw-phy-sel is undocumented but is used for
all the boards using cpsw. And cpsw-phy-sel is not really a child of
the cpsw device, it lives in the system control module instead.

Let's document the existing usage, and improve it a bit where we prefer
to use a phandle instead of a child device for it. That way we can
properly describe the hardware in dts files for things like genpd.

Cc: devicetree@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>