John Crispin [Mon, 19 Oct 2015 10:10:20 +0000 (10:10 +0000)]
kernel: add ath3k module package
Adds a package for the ath3k kernel module, present in 3.18/4.0/4.1 kernels
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 47223
John Crispin [Mon, 19 Oct 2015 10:10:14 +0000 (10:10 +0000)]
firmware: linux-firmware: Add ibt-firmware and ar3k-firmware packages
Some bluetooth devices require firmware. Add intel bluetooth and ar3k for now.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 47222
John Crispin [Mon, 19 Oct 2015 10:10:02 +0000 (10:10 +0000)]
ar71xx: Bitmain Antminer S1 & S3 cleanup
Sets the LEDs to boardname:color:led-name
Sets the LAN to eth0
Other corrections such as the Machine Name and HWIDs
v2 corrects the profile names in the Makefile and changes tabs to spaces
in the Makefile 'define Device/' like the other devices.
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 47221
John Crispin [Mon, 19 Oct 2015 10:09:54 +0000 (10:09 +0000)]
generic: add 8139cp fixes, enable hardware csum/tso on 4.0+
This contains two sets of fixes for the 8139cp driver.
For all kernel versions older than 4.3, we can apply the fixes from the
4.3-rc4 kernel. In particular, these fix the TX timeout recovery which
is causing my Geos to lock up until the hardware watchdog kicks in.
For 4.0 and later kernels, we can also apply the additional improvements
which are going into 4.4 to fix and enable hardware checksum/TSO
offload. Backporting those to older kernels is non-trivial.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
SVN-Revision: 47220
John Crispin [Mon, 19 Oct 2015 10:09:46 +0000 (10:09 +0000)]
base-files: create /var/tmp on boot
FHS mandates presence of /var/tmp on compliant systems.
The lack of /var/tmp was discovered when using MIT Kerberos libraries
which default to that location for storing credentials cache.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 47219
John Crispin [Mon, 19 Oct 2015 10:09:36 +0000 (10:09 +0000)]
oxnas: move gmac soc glue from mach to stmmac driver
Still a lot of kernel-version ifdef'ery, but imho that's easy to remove
once obsoleted and avoids duplicate code in the meantime.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47218
John Crispin [Mon, 19 Oct 2015 10:09:30 +0000 (10:09 +0000)]
oxnas: prepare pinctrl for kernel >=4.2
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47217
John Crispin [Mon, 19 Oct 2015 10:09:23 +0000 (10:09 +0000)]
oxnas: prepare irqchip driver for kernel >=4.2
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47216
John Crispin [Mon, 19 Oct 2015 10:09:16 +0000 (10:09 +0000)]
oxnas: fix duplicate include in clk-oxnas
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47215
John Crispin [Mon, 19 Oct 2015 10:09:07 +0000 (10:09 +0000)]
oxnas: remove obsolete __cpuinit
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47214
John Crispin [Mon, 19 Oct 2015 10:08:56 +0000 (10:08 +0000)]
lantiq: Synchronize access to the DSL command pipe
Whenever two processes were executing different commands at the same
time then one of the commands sometimes got the response of the other
command.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 47213
John Crispin [Mon, 19 Oct 2015 10:08:50 +0000 (10:08 +0000)]
tools/firmware-utils: tplink-safeloader: add version 1.1 support to CPE210/220/510/520
The hardware is identical to version 1.0, add the new models to the support
list.
Also remove the empty line at the end of the support list, the current
stock images don't have it either.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47212
John Crispin [Mon, 19 Oct 2015 10:08:44 +0000 (10:08 +0000)]
tools/firmware-utils: tplink-safeloader: fix support-list format, clean up vendor information
The first 4 bytes of the support list and the vendor information are
supposed to contain the length of these fields.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47211
John Crispin [Mon, 19 Oct 2015 10:08:34 +0000 (10:08 +0000)]
tools/firmware-utils: tplink-safeloader: clean up code
There is no reason for the internal functions not to be static.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47210
John Crispin [Mon, 19 Oct 2015 10:08:29 +0000 (10:08 +0000)]
lantiq: Print the status register whenever an error occurs
This should help finding potential problems with the SPI driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 47209
John Crispin [Mon, 19 Oct 2015 10:08:18 +0000 (10:08 +0000)]
lantiq: Fixed reading the number of RX FIFOs in the SPI driver
Until now the SPI driver used the TX bits for the RX FIFO. This seems
uncritical for now since both are equals on my devices (VR9), but this
could cause problems on other SoCs.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 47208
John Crispin [Mon, 19 Oct 2015 10:08:12 +0000 (10:08 +0000)]
Revert "lantiq: activate spi-xway on TDW89X0"
This reverts commit
68c2e4789b4f071ee75d39248f4d08fe8283eb28.
commit r47159 was bad
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47207
John Crispin [Mon, 19 Oct 2015 10:08:01 +0000 (10:08 +0000)]
uhttpd: update to latest git revision
adds URL alias support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47206
John Crispin [Mon, 19 Oct 2015 10:07:54 +0000 (10:07 +0000)]
ramips: add alsa support
add the SDK alsa driver. this has only been tested on mt7628/88 and wm8960.
mt7620 is only compile tested.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47205
John Crispin [Mon, 19 Oct 2015 10:07:43 +0000 (10:07 +0000)]
ramips: add a baurate hack
When talking to an atmel controller we need 9600 or 250000 baud.
as 250000 does not exist we use
2500000.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47204
John Crispin [Mon, 19 Oct 2015 10:07:38 +0000 (10:07 +0000)]
ramips: add LinkIt Smart7688 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47203
Hauke Mehrtens [Sun, 18 Oct 2015 21:48:32 +0000 (21:48 +0000)]
polarssl: update to version 1.3.14
This fixes CVE-2015-5291 and some other smaller security issues.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47201
Hauke Mehrtens [Sun, 18 Oct 2015 21:48:04 +0000 (21:48 +0000)]
mbedtls: update to version 2.1.2
This fixes CVE-2015-5291 and some other smaller security issues.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47200
Hauke Mehrtens [Sat, 17 Oct 2015 11:50:16 +0000 (11:50 +0000)]
brcm47xx: remove support for kernel 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47199
Hauke Mehrtens [Sat, 17 Oct 2015 11:49:01 +0000 (11:49 +0000)]
bcm53xx: remove support for kernel 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47198
Luka Perkov [Thu, 15 Oct 2015 22:12:13 +0000 (22:12 +0000)]
cosmetic: remove trailing whitespaces
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 47197
Steven Barth [Thu, 15 Oct 2015 08:56:59 +0000 (08:56 +0000)]
6in4: add tunlink option support
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 47189
Felix Fietkau [Mon, 12 Oct 2015 13:11:26 +0000 (13:11 +0000)]
mt76: update to the latest version, fixes tx related crashes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47187
Felix Fietkau [Mon, 12 Oct 2015 13:11:20 +0000 (13:11 +0000)]
firmware-utils/buffalo-enc: explicitly use signed char for checksum function
ARM defaults to unsigned char and that breaks the calculation, as it
relies on sign extension
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47186
Felix Fietkau [Mon, 12 Oct 2015 13:11:03 +0000 (13:11 +0000)]
firmware-utils/buffalo-enc: add support for decrypting data with an offset
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47185
Luka Perkov [Sun, 11 Oct 2015 22:41:30 +0000 (22:41 +0000)]
iperf3: update URL
Update iperf3 to point to the correct project website. Prior URL was the
old iperf2 website.
Signed-off-by: Karl Palsson <karlp@remake.is>
SVN-Revision: 47184
Luka Perkov [Sun, 11 Oct 2015 22:19:25 +0000 (22:19 +0000)]
libnl: fix URL
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
SVN-Revision: 47183
Hauke Mehrtens [Sun, 11 Oct 2015 19:08:08 +0000 (19:08 +0000)]
kernel: generic: add kernel 4.3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47182
Hauke Mehrtens [Sun, 11 Oct 2015 19:00:41 +0000 (19:00 +0000)]
tools: firmware-utils: fix compiler warnings
This just fixes a lot of compiler warnings.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47181
John Crispin [Sun, 11 Oct 2015 16:24:43 +0000 (16:24 +0000)]
lantiq: fix use of IRQF_DISABLED in lantiq kmods
The IRQF_DISABLED flag was removed in kernel 4.1 with commit
"genirq: Remove the deprecated 'IRQF_DISABLED' request_irq() flag entirely" [1].
Therefore the compilation of ltq-hcd and ltq-vmmc kmods fails.
[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=
d8bf368d0631d4bc2612d8bf2e4e8e74e620d0cc
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
SVN-Revision: 47180
John Crispin [Sun, 11 Oct 2015 16:24:31 +0000 (16:24 +0000)]
ar71xx: TP-LINK Archer C5 image name
There are more version on market, add version number to the name.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 47179
John Crispin [Sun, 11 Oct 2015 16:24:22 +0000 (16:24 +0000)]
ar71xx/image: migrate all images based on macro TPLINK
Includes images for
rnx-n360rt
tl-mr3220-v1
tl-mr3420-v1
tl-wa701n-v1
tl-wa730rev1
tl-wa7510n
tl-wa801nd-v1
tl-wa830re-v1
tl-wa901nd-v1
tl-wa901nd-v2
tl-wr740n-v1
tl-wr740n-v3
tl-wr743nd-v1
tl-wr841nd-v3
tl-wr841nd-v5
tl-wr841nd-v7
tl-wr842n-v1
tl-wr941nd-v2
tl-wr941nd-v3
tl-wr941nd-v4
tl-wr1043nd-v1
SVN-Revision: 47178
John Crispin [Sun, 11 Oct 2015 16:24:10 +0000 (16:24 +0000)]
ar71xx/image: remove old build step TPLINK-LZMA
all boards has been migrated to the new build step
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47177
John Crispin [Sun, 11 Oct 2015 16:24:01 +0000 (16:24 +0000)]
ar71xx/image: migrate last TPLINK-LZMA images to new build system
Migrate TLWR1043V2 TLWR2543
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47176
John Crispin [Sun, 11 Oct 2015 16:23:53 +0000 (16:23 +0000)]
ar71xx/image: refactor tplink-chn-v2 devices
* use build step mktplinkfw with extra arguments
* remove now unused mktplinkfw-chn-v2
* use Device/tplink
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47175
John Crispin [Sun, 11 Oct 2015 16:23:44 +0000 (16:23 +0000)]
ar71xx/image: add options argument to mktplinkfw step
Allow to pass extra arguments to mktplinkfw step. Some board requires
an extra argument to create a valid image.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47174
John Crispin [Sun, 11 Oct 2015 16:23:35 +0000 (16:23 +0000)]
ar71xx/image: remove unused multiprofile definitons
These profiles covered by new image/Makefile descriptions. Only the old format uses
MultiProfile macro
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47173
John Crispin [Sun, 11 Oct 2015 16:23:26 +0000 (16:23 +0000)]
lantiq: bugfix wrong non pre-emptive crc errors output
This patch fixes a wrong non pre-emptive crc errors output of
dsl_control.sh status.
Signed-off-by: Luca Debernardi <luca.debernardi@gmail.com>
SVN-Revision: 47172
John Crispin [Sun, 11 Oct 2015 16:23:18 +0000 (16:23 +0000)]
brcm2708: use mmd for overlays subdirectory
Fixes https://dev.openwrt.org/ticket/20704
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47171
John Crispin [Sun, 11 Oct 2015 16:23:11 +0000 (16:23 +0000)]
mtools: build and install mmd
useful for making MS-DOS subdirectories
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47170
John Crispin [Sun, 11 Oct 2015 16:23:01 +0000 (16:23 +0000)]
brcm2708: all sound overlays require i2c to work
Tested on RPi B+ with HiFiBerry Amp+
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47169
Luka Perkov [Sat, 10 Oct 2015 12:35:02 +0000 (12:35 +0000)]
imx6: fix platform checking
Fix platform checking when configuring networks and when doing sysupgrade.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 47168
Luka Perkov [Sat, 10 Oct 2015 12:34:45 +0000 (12:34 +0000)]
uboot-envtools: Add Gateworks Ventana Support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 47167
Michael Büsch [Fri, 9 Oct 2015 07:46:12 +0000 (07:46 +0000)]
omap24xx: Append dtb to the zImage
We just hardcode the n810 dtb for now. It should be selectable via profiles.
SVN-Revision: 47166
Imre Kaloz [Thu, 8 Oct 2015 10:01:30 +0000 (10:01 +0000)]
mvebu: add support for the Linksys WRT1900ACS (Shelby)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 47164
Jo-Philipp Wich [Wed, 7 Oct 2015 22:14:48 +0000 (22:14 +0000)]
uhttpd: fix keep-alive bug (#20607, #20661)
The two commits
5162e3b0ee7bd1d0fd6e75e1ca7993a1834b5291
"allow request handlers to disable chunked reponses"
and
618493e378e2239f0d30902e47adfa134e649fdc
"file: disable chunked encoding for file responses"
broke the chunked transfer encoding handling for proc responses in keep-alive
connections that followed a file response with http status 204 or 304.
The effect of this bug is that cgi responses following a 204 or 304 one where
sent neither in chunked encoding nor with a content-length header, causing
browsers to stall until the keep alive timeout was reached.
Fix the logic flaw by inverting the chunk prevention flag in the client state
and by testing the chunked encoding preconditions every time instead of
once upon client (re-)initialization.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47161
Steven Barth [Wed, 7 Oct 2015 21:11:24 +0000 (21:11 +0000)]
base-files: revert to default ECN settings
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 47160
John Crispin [Wed, 7 Oct 2015 12:12:48 +0000 (12:12 +0000)]
lantiq: activate spi-xway on TDW89X0
use the hardware spi core in favour of spi-gpio.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47159
John Crispin [Wed, 7 Oct 2015 12:12:35 +0000 (12:12 +0000)]
lantiq: spi driver fix
adds a missing wait busy. based on the UGW patch 2060..
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47158
Michael Büsch [Wed, 7 Oct 2015 10:51:18 +0000 (10:51 +0000)]
dl_cleanup: Fix linux blacklist
SVN-Revision: 47157
Michael Büsch [Wed, 7 Oct 2015 10:03:16 +0000 (10:03 +0000)]
dl_cleanup: Port to Python 3
SVN-Revision: 47156
Michael Büsch [Wed, 7 Oct 2015 09:40:42 +0000 (09:40 +0000)]
omap24xx: Add missing kconfig options
SVN-Revision: 47155
Michael Büsch [Wed, 7 Oct 2015 08:30:58 +0000 (08:30 +0000)]
omap24xx: KERNEL_PATCHVER:=4.1
SVN-Revision: 47154
Michael Büsch [Wed, 7 Oct 2015 08:29:06 +0000 (08:29 +0000)]
omap24xx: Remove 4.0
SVN-Revision: 47153
John Crispin [Wed, 7 Oct 2015 08:00:54 +0000 (08:00 +0000)]
lantiq: bugfix luci lantiq_dsl status
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Helge Mader <hmader@tdt.de>
Reported-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47152
John Crispin [Wed, 7 Oct 2015 08:00:40 +0000 (08:00 +0000)]
ramips: fix /target/linux/ramips/dts/HC5XXX.dtsi
dtb complained about those lines
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47151
Felix Fietkau [Tue, 6 Oct 2015 12:33:10 +0000 (12:33 +0000)]
hostapd: wait longer for inactive client probe (empty data frame)
One second is not enough for some devices to ackowledge null data frame
which is sent at the end of ap_max_inactivity interval. In particular,
this causes severe Wi-Fi instability with Apple iPhone which may take
up to 3 seconds to respond.
Signed-off-by: Dmitry Ivanov <dima@ubnt.com>
SVN-Revision: 47149
Felix Fietkau [Tue, 6 Oct 2015 12:33:04 +0000 (12:33 +0000)]
kernel: drop the now unused kmod-oprofile package
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47148
Felix Fietkau [Tue, 6 Oct 2015 12:32:59 +0000 (12:32 +0000)]
oprofile: drop kmod-oprofile dependency, it uses the perf API now
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47147
Felix Fietkau [Tue, 6 Oct 2015 12:32:31 +0000 (12:32 +0000)]
ramips: enable mt76 by default for the mt7620 subtarget (for devices with mt7620 + mt7612)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47146
Felix Fietkau [Mon, 5 Oct 2015 22:30:01 +0000 (22:30 +0000)]
mt76: update to the latest version, adds a few minor fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47143
Felix Fietkau [Mon, 5 Oct 2015 15:43:14 +0000 (15:43 +0000)]
mac80211: add a fix to initialize the tid field in the tx queue struct
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47142
Felix Fietkau [Mon, 5 Oct 2015 14:11:30 +0000 (14:11 +0000)]
build: include homebrew include/library directory in cflags/ldflags on mac os x
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47139
Felix Fietkau [Mon, 5 Oct 2015 14:11:25 +0000 (14:11 +0000)]
build: use host cflags/ldflags for openssl prereq check
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47138
Felix Fietkau [Mon, 5 Oct 2015 11:34:16 +0000 (11:34 +0000)]
ramips: improve read performance of the m25p80 chunked io patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47137
John Crispin [Mon, 5 Oct 2015 10:29:01 +0000 (10:29 +0000)]
lldpd: wrap procd command args in separate quotes
Seems the match pattern was being adapted from 'eth0' to ' eth0'
because of the way I added the procd command args.
This did not seem to be a problem when there were multiple interfaces,
just on devices with single interfaces for lldpd to listen on.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 47136
John Crispin [Mon, 5 Oct 2015 10:28:53 +0000 (10:28 +0000)]
base-files: add URL option for OEM manufacturer info
This URL can be embedded e.g. within UPnP announcements where a link
to the manufacturer's homepage is desired.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 47135
John Crispin [Mon, 5 Oct 2015 10:28:47 +0000 (10:28 +0000)]
openvpn: add handling for route-pre-down option
OpenVPN 2.3 added a route-pre-down option, to run a command before
routes are removed upon disconnection.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
SVN-Revision: 47134
John Crispin [Mon, 5 Oct 2015 10:28:39 +0000 (10:28 +0000)]
uboot_envtools: add P2812HNUF1
Add generation of /etc/fw_env.config for P2812HNUF1
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
SVN-Revision: 47133
John Crispin [Mon, 5 Oct 2015 10:28:34 +0000 (10:28 +0000)]
lantiq: several ARV7519RW22 fixes
Fixes ARV7519RW22 flash register (only 1 flash).
Power LED is green, not red.
Rename message LEDs to internet.
Add LEDs configuration (lan, wan, power).
Enable switch VLANs.
Fix secondary USB.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
SVN-Revision: 47132
John Crispin [Mon, 5 Oct 2015 10:28:26 +0000 (10:28 +0000)]
lantiq: make v4.1 the default kernel
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47131
John Crispin [Mon, 5 Oct 2015 10:28:19 +0000 (10:28 +0000)]
lantiq: Add target TP-Link TD-W8980
The device is similar to the TD-W8970, beside a different Atheros 2.4 GHz
wireless chip and the additional, PCI connected, WAVE300 5 GHz wireless.
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
SVN-Revision: 47130
John Crispin [Mon, 5 Oct 2015 10:28:12 +0000 (10:28 +0000)]
lantiq: fix ath_pci_fixup hang on bridged devices
Port of r41856.
In contrast to the brcm63xx target, it isn't sufficient to enable/disable
the bridge. The device needs to be enabled/disabled to fix the hang. The
bridge will be automatically enabled by the time the connected device is
enabled.
Fixes boot on TD-W8980.
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 47129
John Crispin [Mon, 5 Oct 2015 10:28:07 +0000 (10:28 +0000)]
lantiq: Change the data-type of mac address in ETOP driver
This adds the changes from r46219 to the linux 4.1 patches as well.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 47128
John Crispin [Mon, 5 Oct 2015 10:27:55 +0000 (10:27 +0000)]
lantiq: bugfix uninitialized variables
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Reported-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 47127
John Crispin [Mon, 5 Oct 2015 10:27:49 +0000 (10:27 +0000)]
brcm2708: keep boot partition mounted to allow users to change config.txt
This way it's easier to configure device tree overlays, customize other
parameters...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47126
John Crispin [Mon, 5 Oct 2015 10:27:41 +0000 (10:27 +0000)]
brcm2708: add support for device tree overlays
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47125
John Crispin [Mon, 5 Oct 2015 10:27:34 +0000 (10:27 +0000)]
brcm2708: switch device tree compilation to linux
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47124
John Crispin [Mon, 5 Oct 2015 10:27:18 +0000 (10:27 +0000)]
brcm2708: fix kmod-sound-soc-bcm2708-i2s config
Right now, selecting kmod-sound-soc-bcm2708-i2s causes build errors due to
missing configs.
kmod-regmap enables I2C and SPI, causing build errors due to depending
variables not defined.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47123
John Crispin [Mon, 5 Oct 2015 10:27:09 +0000 (10:27 +0000)]
ramips: improve systick timer
when sleep mode is disable use MIPS as clocksource and clockevent instead of systick.
because MIPS timer has higher resolution 5ns less than systick 20us and
larger counter bits 32 > 16.
clean interrupt by write compare register at isr.
fix typo cause sleep mode not enable.
Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47122
John Crispin [Mon, 5 Oct 2015 10:27:04 +0000 (10:27 +0000)]
ramips: fix use remove_irq to release irqaction resource
Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47121
John Crispin [Mon, 5 Oct 2015 10:27:00 +0000 (10:27 +0000)]
ramips: add support for 16MB VoCore
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47120
John Crispin [Mon, 5 Oct 2015 10:26:54 +0000 (10:26 +0000)]
ramips: fix size-cells for spi nodes
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47119
John Crispin [Mon, 5 Oct 2015 10:26:40 +0000 (10:26 +0000)]
ramips: Ralink RT3883 RGMII pinmux fix.
Due to datasheet of rt3883 SoC rgmii1 port handles pins 84-95 and rgmii2 port handles pins 72-83. When this function ports gets added to rt3883_pinmux_data there's wrong pinmux bits set (RT3883_GPIO_MODE_GE1 manages 84-95 pins and RT3883_GPIO_MODE_GE2 manages 72-83). So when enabling rgmii2 as GPIO driver confuses hardware and nothing work, neither rgmii nor gpio.
Also in '0030-pinctrl-ralink-add-pinctrl-driver.patch' typo in name of rgmii2 port.
Signed-off-by: Nick Leiten <nickleiten@gmail.com>
SVN-Revision: 47118
John Crispin [Mon, 5 Oct 2015 10:26:34 +0000 (10:26 +0000)]
ramips: Enable rx of 1536 bytes ethernet frames on MT7621
The default switch frame size (with FCS + header) is 1536 bytes. But the
GMAC only accepted frames up to 1522 bytes. Setting it to 1536 allows to
receive ethernet frames using the full of MTU 1500 + an extra VLAN header +
VLAN header added by the switch.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47117
John Crispin [Mon, 5 Oct 2015 10:26:28 +0000 (10:26 +0000)]
ramips: Fix too small rx buffer
The driver assumes that the maximum received buffer for non-jumbo frames is
1536 bytes. But the allocation of the rx fragment doesn't reflect that. It
currently allocates fragments which will only be large enough to be used as
rx buffer with the size of 1534 bytes. This is problematic because the GMAC
will now try to write to 2 bytes which don't belong to its receive buffer
when a large enough ethernet frame is received.
This may already be a problem on existing chips but will at least become a
problem when the 1536 byte rx modus is enabled on MT7621a. It is required
on this SoC to receive ethernet frames which use their full 1500 bytes MTU
and a VLAN header next to the switch VLAN tag.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47116
John Crispin [Mon, 5 Oct 2015 10:26:21 +0000 (10:26 +0000)]
ramips: Fix setting of rx buffer length
The length of the DMA rx buffer was always set to 0 because the function
for extracting the length was used to calculate the value for setting it.
Instead the macro has to be split in a get and set function similar to the
TX_DMA_(GET_|)PLEN(0|1) macro.
No problem was noticed on MT7621a before this was changed and thus maybe it
was hidden by different problem which is not yet fixed.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47115
John Crispin [Mon, 5 Oct 2015 10:26:09 +0000 (10:26 +0000)]
ramips: Allow to receive vlan over untag ports on MT7530
The MT7530 switch driver with enable_vlan set will automatically set all
ports to the user port mode. The hardware will remove the incoming vlan tag
on these ports and use it for its internal vlan. This is usually not wanted
and makes it impossible to communicate via vlan over the switch in both
directions.
It is possible to configure a switch port to "transparent mode" when this
port is only used as untag in the switch VLANs. This will disable the VLAN
untagging of packets when they were received on this port. The tagging on
"tag" ports based on the vlan id is still working.
The transparent port mode cannot be used when a port is both used in a VLAN
as "tag" and in another one as "untag" port.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47114
John Crispin [Mon, 5 Oct 2015 10:26:02 +0000 (10:26 +0000)]
ramips: Add build files for HiWiFi HC5x61 models
HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com <http://www.hiwifi.com/>. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them.
The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval.
v3 fix
1: Spaces -> Tabs
2: Removed some packages
Signed-off-by: Xiaoning Kang <kangxn@163.com>
SVN-Revision: 47113
John Crispin [Mon, 5 Oct 2015 10:25:53 +0000 (10:25 +0000)]
ramips: Add DTS files for HiWiFi HC5x61 models
HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them.
The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval.
v3 fix
1: Merged most stuff into dtsi file
2: Remove unnecessary empty lines.
Signed-off-by: Xiaoning Kang <kangxn@163.com>
SVN-Revision: 47112
John Crispin [Mon, 5 Oct 2015 10:25:47 +0000 (10:25 +0000)]
ramips: Add base-files for HiWiFi HC5x61 models
HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them.
The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval.
v3 fix
1: Fixed model order
2: Remove manufacturer name from model name
3: Use a hacky but prettier way to get mac address.
Signed-off-by: Xiaoning Kang <kangxn@163.com>
SVN-Revision: 47111
John Crispin [Mon, 5 Oct 2015 10:25:40 +0000 (10:25 +0000)]
ar71xx: Correct WeIO board name
Trivial parch to correct WeIO board name in the system.
Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com>
SVN-Revision: 47110
John Crispin [Mon, 5 Oct 2015 10:25:28 +0000 (10:25 +0000)]
target/mpc85xx: check if 'generic' subtarget for image file cuImage.tl-wdr4900-v1
Only add 'cuImage.tl-wdr4900-v1' to KERNEL_IMAGES if
the selected subtarget is 'generic'.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 47109
Jo-Philipp Wich [Mon, 5 Oct 2015 09:10:17 +0000 (09:10 +0000)]
iwinfo: nl80211: add support for reading TX power from netlink
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47108
Rafał Miłecki [Mon, 5 Oct 2015 08:54:26 +0000 (08:54 +0000)]
ar71xx: rename firmware for Chinese version of TL-WR941ND v6
It seems there are two *different* versions on TL-WR941ND v6: Chinese
and European one. Currently supported by OpenWrt is Chinese one. Rename
firmware to make it clear.
For details see:
http://wiki.openwrt.org/toh/tp-link/tl-wr941nd
https://forum.openwrt.org/viewtopic.php?id=59295
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47107
projects / openwrt / staging / florian.git / log