Luka Perkov [Sun, 8 Feb 2015 12:01:39 +0000 (12:01 +0000)]
kirkwood: refresh kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44319
Luka Perkov [Sun, 8 Feb 2015 12:01:37 +0000 (12:01 +0000)]
kernel: update 3.18 to 3.18.6
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44318
Jo-Philipp Wich [Sat, 7 Feb 2015 21:26:20 +0000 (21:26 +0000)]
x86: declare missing kernel symbols
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44316
Luka Perkov [Sat, 7 Feb 2015 21:11:06 +0000 (21:11 +0000)]
ar71xx: ubnt: move new board patches into one
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44315
Luka Perkov [Sat, 7 Feb 2015 21:10:51 +0000 (21:10 +0000)]
ar71xx: rb2011: apply patch to file
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44314
Jo-Philipp Wich [Sat, 7 Feb 2015 21:01:48 +0000 (21:01 +0000)]
imagebuilder: align filename with SDK
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44313
Jo-Philipp Wich [Sat, 7 Feb 2015 21:01:43 +0000 (21:01 +0000)]
sdk: rename file to mention target/subtarget and move host system to suffix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44312
Jo-Philipp Wich [Sat, 7 Feb 2015 21:01:37 +0000 (21:01 +0000)]
toolchain: respect CONFIG_VERSION_FILENAMES and add host system suffix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44311
Jo-Philipp Wich [Sat, 7 Feb 2015 21:01:28 +0000 (21:01 +0000)]
openvpn: autostart openvpn instances for each .conf file in /etc/openvpn
Align init behaviour with other distros by starting an OpenVPN instance
for each config file found in /etc/openvpn/. This removes the additional
requirement to "register" the configs with uci and thus simplifies the
setup.
Make sure to respect the disabled state in uci to not suddenly autostart
instances which have been previously set to disabled, also skip configs
which are already started due to uci configuration.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44310
Luka Perkov [Sat, 7 Feb 2015 20:53:16 +0000 (20:53 +0000)]
ar71xx: merge board specific patches into one
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44309
Luka Perkov [Sat, 7 Feb 2015 19:59:08 +0000 (19:59 +0000)]
package: uboot-envtools: add nbg6716 to appropriate group
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44308
Luka Perkov [Sat, 7 Feb 2015 19:59:05 +0000 (19:59 +0000)]
ar71xx: uci-defaults: add el-mini to appropriate group
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44307
Luka Perkov [Sat, 7 Feb 2015 19:59:02 +0000 (19:59 +0000)]
ar71xx: qihoo: define flash variable as static
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44306
Luka Perkov [Sat, 7 Feb 2015 19:58:58 +0000 (19:58 +0000)]
targets: base-files: diag.sh does not need to be executable
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44305
Luka Perkov [Sat, 7 Feb 2015 19:58:52 +0000 (19:58 +0000)]
targets: files in uci-defaults do not need to be executables
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44304
Luka Perkov [Sat, 7 Feb 2015 17:48:39 +0000 (17:48 +0000)]
ar71xx: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44303
Luka Perkov [Sat, 7 Feb 2015 17:48:33 +0000 (17:48 +0000)]
kernel: update 3.14 to 3.14.32
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44302
Jo-Philipp Wich [Sat, 7 Feb 2015 13:33:15 +0000 (13:33 +0000)]
6in4: don't use /dev/stdout for wget calls
Busybox ash does not implement /dev/stdout, therfore any wget output
is written into a file /dev/stdout instead of onto the standard output.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44301
Felix Fietkau [Sat, 7 Feb 2015 10:07:31 +0000 (10:07 +0000)]
build: accept apple llvm as fallback for gcc/g++
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44298
Felix Fietkau [Sat, 7 Feb 2015 10:07:05 +0000 (10:07 +0000)]
include/prereq.mk: fix echo commands with simple /bin/sh
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44297
Jo-Philipp Wich [Fri, 6 Feb 2015 17:38:54 +0000 (17:38 +0000)]
include: fix prereq tests for perl and file (#18911)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44296
Jo-Philipp Wich [Fri, 6 Feb 2015 13:14:29 +0000 (13:14 +0000)]
include: use SHELL, not BASH for HOST_CONFIGURE_VARS
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44295
Jo-Philipp Wich [Fri, 6 Feb 2015 12:35:36 +0000 (12:35 +0000)]
rules.mk: use relative paths for BASH, TAR, FIND, PATCH, PYTHON
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44294
Jo-Philipp Wich [Fri, 6 Feb 2015 12:31:31 +0000 (12:31 +0000)]
imagebuilder: don't pregenerate package index, strip host binaries
The package index is generated on first use anyway, therefore it makes no
sense to continue shipping it.
Also sstrip the bundled host binaries when packing the IB to save some
additional space.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44293
Jo-Philipp Wich [Fri, 6 Feb 2015 11:50:08 +0000 (11:50 +0000)]
include: rework git prereq test to not require 'man'
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44292
Imre Kaloz [Fri, 6 Feb 2015 11:18:59 +0000 (11:18 +0000)]
mvebu: add note about the move to single firmware files
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44291
Imre Kaloz [Fri, 6 Feb 2015 11:16:20 +0000 (11:16 +0000)]
mvebu: support building images for a single board
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44290
Jo-Philipp Wich [Fri, 6 Feb 2015 10:30:04 +0000 (10:30 +0000)]
libevent2: update to v2.0.22
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44289
Jo-Philipp Wich [Fri, 6 Feb 2015 00:27:06 +0000 (00:27 +0000)]
imagebuilder: use FreeBSD compatible tar invocation
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44288
Jo-Philipp Wich [Fri, 6 Feb 2015 00:00:51 +0000 (00:00 +0000)]
config: remove CONFIG_BUILD_STATIC_TOOLS
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44287
Jo-Philipp Wich [Fri, 6 Feb 2015 00:00:47 +0000 (00:00 +0000)]
include: remove static tool linking support
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44286
Jo-Philipp Wich [Fri, 6 Feb 2015 00:00:43 +0000 (00:00 +0000)]
tools: remove static linking support
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44285
Jo-Philipp Wich [Thu, 5 Feb 2015 23:32:17 +0000 (23:32 +0000)]
busybox: fix build on FreeBSD 10.1
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44284
Jo-Philipp Wich [Thu, 5 Feb 2015 23:18:47 +0000 (23:18 +0000)]
mac80211: don't hardcode /bin/bash
Instead of hardcoding /bin/bash, use /usr/bin/env bash - this fixes the
build on FreeBSD 10.1.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44283
Jo-Philipp Wich [Thu, 5 Feb 2015 23:18:42 +0000 (23:18 +0000)]
ncurses: add host build for 'tic'
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44282
Jo-Philipp Wich [Thu, 5 Feb 2015 16:58:24 +0000 (16:58 +0000)]
tools: Fix cmake build on FreeBSD 10.1
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44281
Jo-Philipp Wich [Thu, 5 Feb 2015 16:58:16 +0000 (16:58 +0000)]
tools: Fix mkimage build on FreeBSD 10.1
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44280
Jo-Philipp Wich [Thu, 5 Feb 2015 16:58:10 +0000 (16:58 +0000)]
tools: Fix mpfr build on FreeBSD 10.1
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44279
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:57 +0000 (16:57 +0000)]
tools: Fix xz build on FreeBSD 10.1
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44278
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:50 +0000 (16:57 +0000)]
include: let HOSTCC default to $(CC), not gcc
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44277
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:46 +0000 (16:57 +0000)]
include: don't rely on perl for printing prereq errors
Perl might not be present while checking prereqs, e.g. on a fresh
FreeBSD install.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44276
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:39 +0000 (16:57 +0000)]
include: set shell to "sh" for prereq tests
Bash is not guaranteed to be present, e.g. on a fresh FreeBSD install
so perform prereq tests with /bin/sh.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44275
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:35 +0000 (16:57 +0000)]
tools: remove PrepareCommand macros
They're part of prereq-build.mk now.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44274
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:31 +0000 (16:57 +0000)]
include: remove host command tests from host.mk
Those tests are part of prereq-build.mk now.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44273
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:18 +0000 (16:57 +0000)]
include: declare variables formerly set in tmp/.host.mk
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44272
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:12 +0000 (16:57 +0000)]
include: prereq-build.mk: use TestHostCommand and SetupHostCommand
Also move tests from tools/Makefile and include/host.mk here to have all tests
in a central place.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44271
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:09 +0000 (16:57 +0000)]
include: test build prereqs before preparing tempinfo
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44270
Jo-Philipp Wich [Thu, 5 Feb 2015 16:57:02 +0000 (16:57 +0000)]
include: add TestHostCommand and SetupHostCommand macros
Those macros allow testing various commands on the host system, also process the
prereq tests in the order they're declared.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44269
Imre Kaloz [Thu, 5 Feb 2015 16:31:52 +0000 (16:31 +0000)]
mvebu: don't generate targz images by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44268
Imre Kaloz [Thu, 5 Feb 2015 15:41:07 +0000 (15:41 +0000)]
mvebu: Enable the A385 AP on 3.19
In order for the image to be built, some patches need to be ported to 3.19.
Add the relevant patches. Note that most of them (if not all) should be merged
in 3.20, removing the need to carry them on then.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44267
Imre Kaloz [Thu, 5 Feb 2015 11:34:21 +0000 (11:34 +0000)]
mvebu: add Armada 385 DB AP support
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44266
Imre Kaloz [Thu, 5 Feb 2015 11:29:56 +0000 (11:29 +0000)]
mvebu: add the Armada 385 Reference Design support
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44265
Imre Kaloz [Thu, 5 Feb 2015 11:26:17 +0000 (11:26 +0000)]
mvebu: fix NAND and NOR options
All the boards but Mamba had wrong UBI options so far, making it impossible to
flash the built image on their respective storage medium.
Fix all of the supported boards in order to make the generated images useful.
Tested on a Mirabox, an Armada XP GP and an Openblocks AX3, and used the NAND
chip datasheet for the others.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44264
Imre Kaloz [Thu, 5 Feb 2015 11:25:21 +0000 (11:25 +0000)]
mvebu: add a subprofile for boards based on a small NOR
Some boards only come with a small NOR on it, where UBI isn't a good solution
because of its overhead.
Add a new subprofile for such boards, that rely on the mtd split framework
instead.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44263
Imre Kaloz [Thu, 5 Feb 2015 11:24:10 +0000 (11:24 +0000)]
mvebu: add large NOR sub-profile implementation
While we supported only the NAND so far, some boards use a large enough NOR,
where UBI is the only reasonable option. Create a new sub-profile template with
a different set of UBI options.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44262
Imre Kaloz [Thu, 5 Feb 2015 11:22:43 +0000 (11:22 +0000)]
mvebu: Add sub-profiles
In order to support the various board NAND layout that we support, introduce a
sub-profile similar to the one used by ar71xx.
These subprofiles provide a default implementation for most of the building
functions, while allowing each sub-profile to override any of these operations
in order to have a more specific behaviour, like Mamba expects for example.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44261
Imre Kaloz [Thu, 5 Feb 2015 11:21:31 +0000 (11:21 +0000)]
generic: allow ubi autoattach to run on NOR flash
Some devices out there only have a NOR flash to store the rootfs on.
While using UBI is arguable on this kind of flash, this is something that should
be supported.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44260
Imre Kaloz [Thu, 5 Feb 2015 11:14:53 +0000 (11:14 +0000)]
mvebu: Add MTD split framework support
We're going to need the MTD split related options for our NOR support.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44259
Nicolas Thill [Thu, 5 Feb 2015 05:10:44 +0000 (05:10 +0000)]
config: fix typo in Global build settings menu
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44258
John Crispin [Wed, 4 Feb 2015 06:11:01 +0000 (06:11 +0000)]
ralink: remove VHT capabilities when not using 802.11ac
The mt76 driver might have some problem working with MT7602.
MT7602 should not have VHT capabilities . But the driver not identity properly.
Signed-off-by: wengbj <fl.service@t-firefly.com>
SVN-Revision: 44257
John Crispin [Wed, 4 Feb 2015 06:10:57 +0000 (06:10 +0000)]
linux/modules: add support for Asix ax88179 USB-Gigabit Ethernet adapters
requested and tested by forum user OWonPi
https://forum.openwrt.org/viewtopic.php?id=55495
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 44256
John Crispin [Wed, 4 Feb 2015 06:10:20 +0000 (06:10 +0000)]
ar71xx: add support for the TP-LINK TL-WR941ND v5
This device is very similar to the TL-WR841N v8, only two LED GPIOs are
different.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44255
John Crispin [Wed, 4 Feb 2015 06:10:12 +0000 (06:10 +0000)]
at71xx: TP-LINK Archer: add 5GHz led entry
Add 5GHz led entry after r44033.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 44254
John Crispin [Wed, 4 Feb 2015 06:10:06 +0000 (06:10 +0000)]
base-files: default_postinst() fix variable colision
The name variable contains at first the package name,
and after the last group name.
This patch fixes /etc/rc.d symlink creation (at least).
Change name in pkgname, change the other name in ugname
(user group name), and id in ugid (user group id)
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
SVN-Revision: 44253
John Crispin [Wed, 4 Feb 2015 06:09:51 +0000 (06:09 +0000)]
ath5k: fix spontaneus AR5312 freezes
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44252
John Crispin [Tue, 3 Feb 2015 10:11:18 +0000 (10:11 +0000)]
generic/3.18: update to 3.18.5
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44249
John Crispin [Tue, 3 Feb 2015 10:11:11 +0000 (10:11 +0000)]
ralink: fix USB host function for Intenso M2M
The ubootloader of the M2M sets the reset bits for
both USB device and USB host during initialization
(to save a few mA of power during boot).
However, for the usb<->sata bridge to be properly
detected, it is necessary to clear both reset bits
as otherwise the kernel logs will just be filled
with:
usb 1-1: device descriptor read/64, error -145
...
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
SVN-Revision: 44248
John Crispin [Tue, 3 Feb 2015 10:11:06 +0000 (10:11 +0000)]
Fix possible fail to check for dependencies
Few characters in filenames (a plus sign, a dot) can be interpreted
specially by grep. This can lead to the omission of missing package
dependency. For example if we would have "some.file.so" then it
matches also "some2file.so". -F switch off special meaning
of any character and -x match against whole line.
Signed-off-by: Sławomir Demeszko <s.demeszko@wireless-instruments.com>
SVN-Revision: 44247
John Crispin [Tue, 3 Feb 2015 10:10:54 +0000 (10:10 +0000)]
map: Fix white space errors
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 44246
John Crispin [Mon, 2 Feb 2015 10:32:04 +0000 (10:32 +0000)]
ar71xx: Revert "added board support for compex wpj558"
This reverts commit
f7873071561d82e75ba2dc46433a2982fef8ac6f.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44245
John Crispin [Mon, 2 Feb 2015 09:02:35 +0000 (09:02 +0000)]
ralink: cleanup firefly default packages
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44244
John Crispin [Mon, 2 Feb 2015 09:02:24 +0000 (09:02 +0000)]
cURL: implement new functionality with cleanup and fixes
remove obsolete configuration settings
--disable-thread
--enable-nonblocking
--without-krb4
remove SSPI support
only supported on windows
correct --with/without-ca-path handling
only supported with OpenSSL and PolarSSL
correct LDAP/LDAPS protocol
add dependency libopenldap
added SCP/SFTP protocol
default "No"
depends on libssh2
added IDN support
default "No"
depends on libidn
added SMB protocol (new in 7.40)
default "No"
require 'cryptographic authentication' and either 'GnuTLS' or 'OpenSSL' selected
added Unix sockets support (new in 7.40)
default "No"
added error verbose messages
default "No"
changes to Makefile
Increase PKG_RELEASE
PKG_CONFIG_DEPENDS and CONFIGURE_ARGS
extended for new functionality
use "autoconf_bool" for all --enable/--disable options
restructure for easier reading
changes to Config.in
extended for new functionality
implement dependencies
restructure and grouping for easier reading
build tested on XUbuntu 14.10 x86 for x86 (generic) and ar71xx (WNDR3800)
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
SVN-Revision: 44243
John Crispin [Mon, 2 Feb 2015 09:02:16 +0000 (09:02 +0000)]
ralink: add FireWRT button detail
Signed-off-by: wengbj <fl.service@t-firefly.com>
SVN-Revision: 44242
John Crispin [Mon, 2 Feb 2015 09:02:10 +0000 (09:02 +0000)]
ralink: add FireWRT led detail
Signed-off-by: wengbj <fl.service@t-firefly.com>
SVN-Revision: 44241
John Crispin [Mon, 2 Feb 2015 09:02:02 +0000 (09:02 +0000)]
ralink: add ethernet macaddr to dts for FireWRT
Signed-off-by: wengbj <fl.service@t-firefly.com>
SVN-Revision: 44240
John Crispin [Mon, 2 Feb 2015 09:01:44 +0000 (09:01 +0000)]
mac80211: Revert adding SM Power Save capability to hostapd configuration
Part of rev 44173 added setting the SM Power Save capability in the hostapd.conf
file if the driver indicated that it was supported. It appears this was
incorrect, because the field in the actual HT Capabilities field in the AP
configuration is really a state indication. Just copying the state from the
capability resulted in the AP indicating that it had SMPS enabled all the time
if it supported SMPS. This effectively just disables all clients from sending
packets to the AP with more than one spatial stream, for no good reason.
So remove this part of the change.
Signed-off-by: Robert Hancock <hancockrwd@gmail.com>
SVN-Revision: 44239
John Crispin [Mon, 2 Feb 2015 09:01:07 +0000 (09:01 +0000)]
ramips: add support for Xiaomi MiWiFi Mini devices
This patch adds support for Xiaomi MiWiFi Mini, a 802.11a/b/g/n/ac dual radio
wireless router based on the MediaTek MT7620a SoC.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 44238
John Crispin [Mon, 2 Feb 2015 09:00:21 +0000 (09:00 +0000)]
added board support for compex wpj558
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 44237
Jo-Philipp Wich [Sun, 1 Feb 2015 13:11:17 +0000 (13:11 +0000)]
util-linux: only enable curses support if required
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44236
Zoltan Herpai [Sun, 1 Feb 2015 09:35:52 +0000 (09:35 +0000)]
modules: fix usb-gadget build on 3.18
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 44235
Felix Fietkau [Sun, 1 Feb 2015 08:20:37 +0000 (08:20 +0000)]
ramips: fix ethernet driver tx completion polling
- budget is decremented with completed frames, so don't check if done is
smaller
- ACK the interrupt before processing further frames to fix a small race
condition.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44234
Jo-Philipp Wich [Sat, 31 Jan 2015 22:23:01 +0000 (22:23 +0000)]
x86_64: add more symbols required to enable SMP
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44233
Jo-Philipp Wich [Sat, 31 Jan 2015 17:33:32 +0000 (17:33 +0000)]
x86_64: support HyperThreading and SMP with up to 8 CPUs
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44232
Jo-Philipp Wich [Sat, 31 Jan 2015 16:49:26 +0000 (16:49 +0000)]
linux: enable kmod-bcma on ppc40x after r44230
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44231
Rafał Miłecki [Sat, 31 Jan 2015 16:43:13 +0000 (16:43 +0000)]
kernel: disable bcma's usage of OF API in kernel 3.10
It fails to build because of missing of_irq_parse_raw and incompatible
irq_create_of_mapping.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44230
Jo-Philipp Wich [Sat, 31 Jan 2015 13:55:51 +0000 (13:55 +0000)]
linux: convert CompareKernelPatchVer to version tagged symbols
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44229
Jo-Philipp Wich [Sat, 31 Jan 2015 13:55:44 +0000 (13:55 +0000)]
include: apply version filter on AutoLoad and AutoProbe arguments
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44228
Jo-Philipp Wich [Sat, 31 Jan 2015 13:15:45 +0000 (13:15 +0000)]
linux: fix framebuffer kmods for >= 3.15
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44227
Nicolas Thill [Sat, 31 Jan 2015 08:15:51 +0000 (08:15 +0000)]
include: improve 'gettext-version' fixup
* enclose the fixup in brackets
* match anything in the call to AM_GNU_GETTEXT_VERSION
* call it early (before autoreconf if both are specified)
* chain a call to autoreconf since it messes with configure.ac
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44225
Nicolas Thill [Sat, 31 Jan 2015 08:15:46 +0000 (08:15 +0000)]
include: don't use extended regex for deps checking
Closes: #18851
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44224
Jo-Philipp Wich [Fri, 30 Jan 2015 10:04:23 +0000 (10:04 +0000)]
linux: fix mips boot decompressor build
Replace the now defunct 062-mips_decompressor_build_fix.patch with another
patch that simply undefines the arch memset and memcpy defines to avoid
syntax errors in the redeclaration.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44223
John Crispin [Fri, 30 Jan 2015 08:06:47 +0000 (08:06 +0000)]
mac80211: Revision r36939 breaks support for RT5370 (rt2800usb)
http://patchwork.ozlabs.org/patch/434532/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44222
John Crispin [Fri, 30 Jan 2015 08:06:40 +0000 (08:06 +0000)]
ar71xx: add Netgear WNR1000v2/WNR1000v2-VC support (#18633)
The board is already supported by OpenWrt. WNR1000v2/WNR1000v2-VC are
pretty much the same as WNR2000v3/WNR612v2, therefore the same
initialization code and flash layout is used.
Signed-off-by: Ștefan Rusu <saltwaterc@gmail.com>
Tested-by: Douglas Fraser <1dsfraser@gmail.com>
SVN-Revision: 44221
John Crispin [Fri, 30 Jan 2015 08:06:28 +0000 (08:06 +0000)]
mac80211: fix NULL pointer crash in monitor frame injection TX path
This "patch to the patch" fixes a NULL pointer derefence crash in the new
intermediate software queues. The crash can be reproduced by injecting an
802.11 frame with a BSSID that does not belong to a configured vif. The
wperf tool (https://github.com/anyfi/wperf) may be convenient for doing
this.
Signed-off-by: Johan Almbladh <ja@anyfi.net>
SVN-Revision: 44220
Rafał Miłecki [Fri, 30 Jan 2015 07:25:43 +0000 (07:25 +0000)]
bcm53xx: fix partitions on Netgear R8000
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44219
Rafał Miłecki [Fri, 30 Jan 2015 06:58:35 +0000 (06:58 +0000)]
bcm53xx: fix booting BCM4709
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44218
Rafał Miłecki [Fri, 30 Jan 2015 06:30:44 +0000 (06:30 +0000)]
bcm53xx: fix Netgear R8000 serial console
Thanks raven-auand.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44217
Zoltan Herpai [Fri, 30 Jan 2015 00:19:18 +0000 (00:19 +0000)]
sunxi: disable MMC debugging in kernel config
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44216
Zoltan Herpai [Fri, 30 Jan 2015 00:18:21 +0000 (00:18 +0000)]
sunxi: workaround switch being uninitialized on netifd startup
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44215
Zoltan Herpai [Fri, 30 Jan 2015 00:17:16 +0000 (00:17 +0000)]
sunxi: add support for Lamobo R1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44214