Maarten Lankhorst [Mon, 9 Apr 2018 12:46:54 +0000 (14:46 +0200)]
drm/i915: Remove get_existing_crtc_state
get_existing_crtc_state is currently unused, get rid of it.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409124656.39886-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Maarten Lankhorst [Mon, 9 Apr 2018 12:46:53 +0000 (14:46 +0200)]
drm/i915: Change use get_new_plane_state instead of existing plane state
The get_existing macros are deprecated and should be replaced by
get_old/new_state for clarity.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409124656.39886-1-maarten.lankhorst@linux.intel.com
[mlankhorst: Remove useless warn. (Ville)]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tvrtko Ursulin [Fri, 6 Apr 2018 12:35:14 +0000 (13:35 +0100)]
drm/i915/execlists: Log fence context & seqno throughout GEM_TRACE
Include fence context and seqno in low level tracing so it is easier to
follow flows of individual requests when things go bad.
Also added tracing on the reset side of things.
v2:
Chris Wilson:
* Standardize global_seqno and seqno as global.
* Include current hws seqno in execlists_cancel_port_requests.
v3:
* Fix port printk format for all builds.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v2
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406123514.5809-1-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Fri, 6 Apr 2018 11:44:07 +0000 (12:44 +0100)]
drm/i915: Enclose for_each_engine_masked macro arguments in parentheses
Enclose for_each_engine_masked macro arguments in parentheses.
v2:
* Fixup whitespace to satisfy checkpatch.
* Likewise reformat to 80 chars.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406114407.25360-1-tvrtko.ursulin@linux.intel.com
Chandra Konduru [Mon, 9 Apr 2018 03:41:13 +0000 (09:11 +0530)]
drm/i915: Upscale scaler max scale for NV12
This patch updates scaler max limit support for NV12
v2: Rebased (me)
v3: Rebased (me)
v4: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.
v5: Addressed review comments from Ville and rebased
- calculation of max_scale to be made
less convoluted by splitting it up a bit
- Indentation errors to be fixed in the series
v6: Rebased (me)
Fixed review comments from Paauwe, Bob J
Previous version, where a split of calculation
was done, was wrong. Fixed that issue here.
v7: Rebased (me)
v8: Rebased (me)
v9: Rebased (me)
v10: Rebased (me)
v11: Addressed review comments from Shashank Sharma
Alignment issues fixed.
When call to skl_update_scaler is made, 0 was being
sent instead of pixel_format.
When crtc update scaler is called, we dont have the
fb to derive the pixel format. Added the function
parameter bool plane_scaler_check to account for this.
v12: Fixed failure in IGT debugfs_test.
fb is NULL in skl_update_scaler_plane
Due to this, accessing fb->format caused failure.
Patch checks fb before using.
v13: In the previous version there was a flaw.
In skl_update_scaler during plane_scaler_check
if the format was non-NV12, it would set need_scaling
to false. This could reset the previously set need_scaling
from a previous condition check. Patch fixes this.
Patch also adds minimum src height for YUV 420 formats
to 16 (as defined in BSpec) and adds for checking this
range.
v14: Addressed review comments from Maarten
Just add a check for NV12 min src height in
skl_update_scaler and retain the remaining checks
as is. Added Reviewed By from Juha-Pekka Heikkila.
v15: Rebased the series.
v16: Changed fb height restriction to be >= 16 as per
Bspec. Earlier it was > 16.
v17: Adding src width and height to be mult of 4 restriction
to avoid pipe fifo underruns for NV12.
Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-15-git-send-email-vidya.srinivas@intel.com
Chandra Konduru [Mon, 9 Apr 2018 03:41:12 +0000 (09:11 +0530)]
drm/i915: Update format_is_yuv() to include NV12
This patch adds NV12 to format_is_yuv() function
for sprite planes.
v2:
-Use intel_ prefix for format_is_yuv (Ville)
v3: Rebased (me)
v4: Rebased and addressed review comments from Clinton A Taylor.
"static function in intel_sprite.c is not available
to the primary plane functions".
Changed commit message - function modified for
sprite planes.
v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.
v6: Rebased (me)
v7: Rebased (me)
v8: Rebased (me)
v9: Rebased (me)
v10: Changed intel_format_is_yuv function from
static to non-static. We need to use it later from
other files for check.
v11: Rebased the patch. format_is_yuv has already
been renamed to intel_format_is_yuv in the color
patch series which is already merged. This function
which was previously static has already been made
non-static. So this patch after rebase just adds
NV12 to intel_format_is_yuv function.
v12: Added reviewed by from Juha-Pekka Heikkila
v13/v14/v15: Rebased the series
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-14-git-send-email-vidya.srinivas@intel.com
Chandra Konduru [Mon, 9 Apr 2018 03:41:11 +0000 (09:11 +0530)]
drm/i915: Set scaler mode for NV12
This patch sets appropriate scaler mode for NV12 format.
In this mode, skylake scaler does either chroma-upsampling or
chroma-upsampling and resolution scaling
v2: Review comments from Ville addressed
NV12 case to be checked first for setting
the scaler
v3: Rebased (me)
v4: Rebased (me)
v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.
v6: Rebased (me)
v7: Rebased (me)
v8: Rebased (me)
Restricting the NV12 change for scaler to BXT and KBL
in this series.
v9: Rebased (me)
v10: As of now, NV12 has been tested on Gen9 and Gen10. However,
code is applicable to all GEN >= 9. Hence making
that change to keep it generic.
Comments under v8 is not valid anymore.
v11: Addressed review comments by Shashank Sharma.
For Gen10+, the scaler mode to be set it planar or normal
(single bit). Changed the code to be applicable to all
Gen.
v12: Addressed review comments from Shashank Sharma
For Gen9 (apart from GLK) bits 28:29 to be programmed
in PS_CTRL for NV12. For GLK and Gen10+, bit 29 to be set
for all Planar.
v13: Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
Adding Reviewed by tag from Shashank Shamr
v14: Added reviewed by from Juha-Pekka Heikkila
v15: Rebased the series
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-13-git-send-email-vidya.srinivas@intel.com
Vidya Srinivas [Mon, 9 Apr 2018 03:41:10 +0000 (09:11 +0530)]
drm/i915: Enable YUV to RGB for Gen10 in Plane Ctrl Reg
If the fb format is YUV, enable the plane CSC mode bits
for the conversion.
v2: Addressed review comments from Shashank Sharma
Alignment issue fixed in i915_reg.h
v3: Adding Reviewed By from Shashank Sharma
v4: Rebased the patch. As part of rebasing, re-using
the color series defines which are already merged.
plane_state->base.color_encoding might not be set for
NV12. For now, just using PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709
in glk_plane_color_ctl if format is NV12.
v5: Added reviewed by from Juha-Pekka Heikkila
v6: Rebased the series
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-12-git-send-email-vidya.srinivas@intel.com
Vidya Srinivas [Mon, 9 Apr 2018 03:41:09 +0000 (09:11 +0530)]
drm/i915: Display WA 827
Display WA 827 applies to GEN9 (excluede GLK) and CNL.
Switching the plane format from NV12 to RGB and leaving system idle
results in display underrun and corruption.
WA: Set the bit 15 & bit 19 to 1b in the CLKGATE_DIS_PSL
register for the pipe in which NV12 plane is enabled.
v2: Addressed review comments from Maarten and
Juha-Pekka Heikkila. Added reviewed by from
Juha-Pekka Heikkila.
v3: Rebased the series
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-11-git-send-email-vidya.srinivas@intel.com
Mahesh Kumar [Mon, 9 Apr 2018 03:41:08 +0000 (09:11 +0530)]
drm/i915/skl: split skl_compute_ddb function
This patch splits skl_compute_wm/ddb functions into two parts.
One adds all affected pipes after the commit to atomic_state structure
and second part does compute the DDB.
v2: Added reviewed by tag from Shashank Sharma
v3: Added reviewed by from Juha-Pekka Heikkila
v4: Rebased the series
v5: Fixed checkpatch error. Changed *changed = true
to (*changed) = true;
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-10-git-send-email-vidya.srinivas@intel.com
Mahesh Kumar [Mon, 9 Apr 2018 03:41:07 +0000 (09:11 +0530)]
drm/i915/skl+: nv12 workaround disable WM level 1-7
Display Workaround #0826 (SKL:ALL BXT:ALL) & #1059(CNL:A)
Hardware sometimes fails to wake memory from pkg C states fetching the
last few lines of planar YUV 420 (NV12) planes. This causes
intermittent underflow and corruption.
WA: Disable package C states or do not enable latency levels 1 through 7
(WM1 - WM7) on NV12 planes.
v2: Addressed review comments by Maarten.
v3: Adding reviewed by tag from Shashank Sharma
v4: Added reviewed by from Juha-Pekka Heikkila
v5: Rebased the series
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-9-git-send-email-vidya.srinivas@intel.com
Mahesh Kumar [Mon, 9 Apr 2018 03:41:06 +0000 (09:11 +0530)]
drm/i915/skl+: make sure higher latency level has higher wm value
DDB allocation optimization algorithm requires/assumes ddb allocation for
any memory C-state level DDB value to be as high as level below the
current level. Render decompression requires level WM to be as high as
wm level-0. This patch fulfils both the requirements.
v2: Changed plane_num to plane_id in skl_compute_wm_levels
v3: Addressed review comments from Shashank Sharma
Changed the commit message "statement can be more clear,
"DDB value to be as high as level below " what is level below ?"
v4: Added reviewed by tag from Shashank Sharma
v5: Added reviewed by from Juha-Pekka Heikkila
v6: Rebased the series
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-8-git-send-email-vidya.srinivas@intel.com
Mahesh Kumar [Mon, 9 Apr 2018 03:41:05 +0000 (09:11 +0530)]
drm/i915/skl+: pass skl_wm_level struct to wm compute func
This patch passes skl_wm_level structure itself to watermark
computation function skl_compute_plane_wm function (instead
of its internal parameters). It reduces number of arguments
required to be passed.
v2: Addressed review comments by Shashank Sharma
v3: Adding reviewed by tag from Shashank Sharma
v4: Added reviewed by from Juha-Pekka Heikkila
v5: Rebased the series
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-7-git-send-email-vidya.srinivas@intel.com
Mahesh Kumar [Mon, 9 Apr 2018 03:41:04 +0000 (09:11 +0530)]
drm/i915/skl+: NV12 related changes for WM
NV12 requires WM calculation for UV plane as well.
UV plane WM should also fulfill all the WM related restrictions.
v2: Addressed review comments from Shashank Sharma.
v3: Addressed review comments from Shashank Sharma
Changed plane_num to plane_id in skl_compute_plane_wm_params
and skl_compute_plane_wm.
Adding reviewed by tag from Shashank Sharma
v4: Added reviewed by from Juha-Pekka Heikkila
v5: Rebased the series
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-6-git-send-email-vidya.srinivas@intel.com
Mahesh Kumar [Mon, 9 Apr 2018 03:41:03 +0000 (09:11 +0530)]
drm/i915/skl+: support verification of DDB HW state for NV12
For YUV 420 Planar formats like NV12,
buffer allocation is done for Y and UV surfaces separately.
For NV12 plane formats, the UV buffer
allocation must be programmed in the Plane Buffer Config register
and the Y buffer allocation must be programmed in the
Plane NV12 Buffer Config register. Both register values
should be verified during verify_wm_state.
v2: Addressed review comments by Maarten.
v3: Addressed review comments by Shashank Sharma.
v4: Adding reviewed by tag from Shashank Sharma
v5: Added reviewed by from Juha-Pekka Heikkila
v6: Rebased the series
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-5-git-send-email-vidya.srinivas@intel.com
Mahesh Kumar [Mon, 9 Apr 2018 03:41:02 +0000 (09:11 +0530)]
drm/i915/skl+: add NV12 in skl_format_to_fourcc
Add support of recognizing DRM_FORMAT_NV12 from plane_format
register value.
v2: Added reviewed by tag from Mika Kahola
v3: Added reviewed by from Juha-Pekka Heikkila
v4: Rebased the series
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-4-git-send-email-vidya.srinivas@intel.com
Mahesh Kumar [Mon, 9 Apr 2018 03:41:01 +0000 (09:11 +0530)]
drm/i915/skl+: refactor WM calculation for NV12
Current code calculates DDB for planar formats in such a way that we
store DDB of plane-0 in plane 1 & vice-versa.
In order to make this clean this patch refactors WM/DDB calculation for
NV12 planar formats.
v2: Addressed review comments by Maarten
v3: Rebased and addressed review comments by Maarten
v4: Fixed a compilation issue of string replacement is_nv12 to
is_planar
v5: Added reviewed by from Juha-Pekka Heikkila
v6: Rebased the series
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-3-git-send-email-vidya.srinivas@intel.com
Mahesh Kumar [Mon, 9 Apr 2018 03:41:00 +0000 (09:11 +0530)]
drm/i915/skl+: rename skl_wm_values struct to skl_ddb_values
skl_wm_values struct contains values of pipe/plane DDB only.
so rename it for better readability of code. Similarly
skl_copy_wm_for_pipe copies DDB values.
s/skl_wm_values/skl_ddb_values
s/skl_copy_wm_for_pipe/skl_copy_ddb_for_pipe
Changes since V1:
- also change name of skl_copy_wm_for_pipe
v2: Added reviewed by from Juha-Pekka Heikkila
v3: Rebased the series
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-2-git-send-email-vidya.srinivas@intel.com
Lyude Paul [Sat, 7 Apr 2018 01:10:53 +0000 (21:10 -0400)]
drm/i915/dp: Send DPCD ON for MST before phy_up
When doing a modeset where the sink is transitioning from D3 to D0 , it
would sometimes be possible for the initial power_up_phy() to start
timing out. This would only be observed in the last action before the
sink went into D3 mode was intel_dp_sink_dpms(DRM_MODE_DPMS_OFF). We
originally thought this might be an issue with us accidentally shutting
off the aux block when putting the sink into D3, but since the DP spec
mandates that sinks must wake up within 1ms while we have 100ms to
respond to an ESI irq, this didn't really add up. Turns out that the
problem is more subtle then that:
It turns out that the timeout is from us not enabling DPMS on the MST
hub before actually trying to initiate sideband communications. This
would cause the first sideband communication (power_up_phy()), to start
timing out because the sink wasn't ready to respond. Afterwards, we
would call intel_dp_sink_dpms(DRM_MODE_DPMS_ON) in
intel_ddi_pre_enable_dp(), which would actually result in waking up the
sink so that sideband requests would work again.
Since DPMS is what lets us actually bring the hub up into a state where
sideband communications become functional again, we just need to make
sure to enable DPMS on the display before attempting to perform sideband
communications.
Changes since v1:
- Remove comment above if (!intel_dp->is_mst) - vsryjala
- Move intel_dp_sink_dpms() for MST into intel_dp_post_disable_mst() to
keep enable/disable paths symmetrical
- Improve commit message - dhnkrn
Changes since v2:
- Only send DPMS off when we're disabling the last sink, and only send
DPMS on when we're enabling the first sink - dhnkrn
Changes since v3:
- Check against is_mst, not intel_dp->is_mst - dhnkrn/vsyrjala
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Fixes: ad260ab32a4d9 ("drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.")
Link: https://patchwork.freedesktop.org/patch/msgid/20180407011053.22437-1-lyude@redhat.com
Chris Wilson [Fri, 6 Apr 2018 22:03:54 +0000 (23:03 +0100)]
drm/i915: Pass the set of guilty engines to i915_reset()
Currently, we rely on inspecting the hangcheck state from within the
i915_reset() routines to determine which engines were guilty of the
hang. This is problematic for cases where we want to run
i915_handle_error() and call i915_reset() independently of hangcheck.
Instead of relying on the indirect parameter passing, turn it into an
explicit parameter providing the set of stalled engines which then are
treated as guilty until proven innocent.
While we are removing the implicit stalled parameter, also make the
reason into an explicit parameter to i915_reset(). We still need a
back-channel for i915_handle_error() to hand over the task to the locked
waiter, but let's keep that its own channel rather than incriminate
another.
This leaves stalled/seqno as being private to hangcheck, with no more
nefarious snooping by reset, be it whole-device or per-engine. \o/
The only real issue now is that this makes it crystal clear that we
don't actually do any testing of hangcheck per se in
drv_selftest/live_hangcheck, merely of resets!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406220354.18911-2-chris@chris-wilson.co.uk
Chris Wilson [Fri, 6 Apr 2018 22:03:53 +0000 (23:03 +0100)]
drm/i915: Treat i915_reset_engine() as guilty until proven innocent
If we are resetting just one engine, we know it has stalled. So we can
pass the stalled parameter directly to i915_gem_reset_engine(), which
alleviates the necessity to poke at the generic engine->hangcheck.stalled
magic variable, leaving that under control of hangcheck as its name
implies. Other than simplifying by removing the indirect parameter along
this path, this allows us to introduce new reset mechanisms that run
independently of hangcheck.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406220354.18911-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 6 Apr 2018 15:51:44 +0000 (16:51 +0100)]
drm/i915: Split out parking from the idle worker for reuse
We will want to park GEM before disengaging the drive^W^W^W unwedging.
Since we already do the work for idling, expose the guts as a new
function that we can then reuse.
v2: Just skip if already parked; makes it more forgiving to use by
future callers.
v3: Extract mark_busy, rename it to i915_gem_unpark and place it next to
i915_gem_park so that we can evaluate it for symmetry more easily.
Calling GEM from inside i915_request looks to be a bit of a layering
violation, for the moment I am imaging them as being notify_cb.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> #v1
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406155144.27791-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 6 Apr 2018 10:09:50 +0000 (11:09 +0100)]
drm/i915/selftests: Rename wait_for_hang() to wait_until_running()
Tvrtko mentioned that wait_for_hang() was confusing as it does not
actually wait for the aforementioned hang, just until the request is
running and we are *ready* to inject a hang. A quick
s/wait_for_hang/wait_until_running/ removes that confusion without
having to rethink the naming scheme, immediately at least.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406100950.19033-1-chris@chris-wilson.co.uk
Oscar Mateo [Thu, 5 Apr 2018 14:00:52 +0000 (17:00 +0300)]
drm/i915/icl: Enable RC6 and RPS in Gen11
AFAICT, once the new interrupt is in place, the rest should behave the
same as Gen10.
v2: Update ring frequencies (Sagar)
v3: Rebase.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405140052.10682-5-mika.kuoppala@linux.intel.com
Oscar Mateo [Fri, 6 Apr 2018 09:32:37 +0000 (12:32 +0300)]
drm/i915/icl: Deal with GT INT DW correctly
BSpec says:
"Second level interrupt events are stored in the GT INT DW. GT INT DW is
a double buffered structure. A snapshot of events is taken when SW reads
GT INT DW. From the time of read to the time of SW completely clearing
GT INT DW (to indicate end of service), all incoming interrupts are logged
in a secondary storage structure. this guarantees that the record of
interrupts SW is servicing will not change while under service".
We read GT INT DW in several places now:
- The IRQ handler (banks 0 and 1) where, hopefully, it is completely
cleared (operation now covered with the irq lock).
- The 'reset' interrupts functions for RPS and GuC logs, where we clear
the bit we are interested in and leave the others for the normal
interrupt handler.
- The 'enable' interrupts functions for RPS and GuC logs, as a measure
of precaution. Here we could relax a bit and don't check GT INT DW
at all or, if we do, at least we should clear the offending bit
(which is what this patch does).
Note that, if every bit is cleared on reading GT INT DW, the register
won't be locked. Also note that, according to the BSpec, GT INT DW
cannot be cleared without first servicing the Selector & Shared IIR
registers.
v2:
- Remove some code duplication (Tvrtko)
- Make sure GT_INTR_DW are protected by the irq spinlock, since it's a
global resource (Tvrtko)
v3: Optimize the spinlock (Tvrtko)
v4: Rebase.
v5:
- take spinlock on outer scope to please sparse (Mika)
- use raw_reg accessors (Mika)
v6: omit the continue in looping banks (Michel)
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v4)
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406093237.14548-1-mika.kuoppala@linux.intel.com
Oscar Mateo [Thu, 5 Apr 2018 14:00:50 +0000 (17:00 +0300)]
drm/i915/icl: Handle RPS interrupts correctly for Gen11
Using the new hierarchical interrupt infrastructure.
v2: Rebase
v3: Rebase
v4: use class/instance handler (Mika)
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405140052.10682-3-mika.kuoppala@linux.intel.com
Mika Kuoppala [Fri, 6 Apr 2018 09:31:45 +0000 (12:31 +0300)]
drm/i915/icl: Use hw engine class, instance to find irq handler
Interrupt identity register we already read from hardware
contains engine class and instance fields. Leverage
these fields to find correct engine to handle the interrupt.
v3: rebase on top of rps intr
use correct class / instance limits (Michel)
v4: split engine/other handling
v5: empty iir is not err (Daniele, Michel)
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406093145.14389-1-mika.kuoppala@linux.intel.com
Michel Thierry [Thu, 5 Apr 2018 14:00:48 +0000 (17:00 +0300)]
drm/i915/icl: Add reset control register changes
The bits used to reset the different engines/domains have changed in
GEN11, this patch maps the reset engine mask bits with the new bits
in the reset control register.
v2: Use shift-left instead of BIT macro to match the file style (Paulo).
v3: Reuse gen8_reset_engines (Daniele).
v4: Do not call intel_uncore_forcewake_reset after reset, we may be
using the forcewake to read protected registers elsewhere and those
results may be clobbered by the concurrent dropping of forcewake.
bspec: 19212
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405140052.10682-1-mika.kuoppala@linux.intel.com
Kevin Rogovin [Fri, 6 Apr 2018 08:05:57 +0000 (11:05 +0300)]
drm/i915: Describe the bottom of stack in processing a batchbuffer
Now that "DOC: User command execution" of i915_gem_execbuffer.c is included
in the i915.rst, it is benecifial (for new developers) to read what happens
at the bottom of the driver stack (in terms of bytes written to be read
by the GPU) when processing a user-space batchbuffer.
v5:
Typo correction of lacking double tick.
Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[Joonas: correcting the patch title]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523001957-6427-4-git-send-email-kevin.rogovin@intel.com
Kevin Rogovin [Fri, 6 Apr 2018 08:05:56 +0000 (11:05 +0300)]
drm/i915: Add link to documentation in i915_gem_execbuffer.c
Add the documentation of "DOC: User command execution" of
i915_gem_execbuffer.c into a new section in i915.rst.
Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[Joonas: correcting the patch title]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523001957-6427-3-git-send-email-kevin.rogovin@intel.com
Kevin Rogovin [Fri, 6 Apr 2018 08:05:55 +0000 (11:05 +0300)]
drm/i915: Narration overview on GEM
Add a narration to i915.rst about Intel GEN GPU's: engines,
driver context and relocation. Also do minor reorder to improve
narration.
v5:
More type fixes.
Flow bullet list so lines are not too long.
Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
[Joonas: correcting the patch title]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523001957-6427-2-git-send-email-kevin.rogovin@intel.com
Chris Wilson [Fri, 30 Mar 2018 13:18:01 +0000 (14:18 +0100)]
drm/i915/selftests: Avoid repeatedly harming the same innocent context
We don't handle resetting the kernel context very well, or presumably any
context executing its breadcrumb commands in the ring as opposed to the
batchbuffer and flush. If we trigger a device reset twice in quick
succession while the kernel context is executing, we may end up skipping
the breadcrumb. This is really only a problem for the selftest as
normally there is a large interlude between resets (hangcheck), or we
focus on resetting just one engine and so avoid repeatedly resetting
innocents.
Something to try would be a preempt-to-idle to quiesce the engine before
reset, so that innocent contexts would be spared the reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180330131801.18327-1-chris@chris-wilson.co.uk
Gaurav K Singh [Thu, 5 Apr 2018 16:42:24 +0000 (22:12 +0530)]
drm/i915/audio: Fix audio enumeration issue on BXT
On Apollolake, with stress test warm reboot, audio card was not getting
enumerated after reboot. This was a spurious issue happening on
Apollolake. HW codec and HD audio controller link was going out of sync
for which there was a fix in i915 driver but was not getting invoked for
BXT. Extending this fix to BXT as well.
Tested on apollolake chromebook by stress test warm reboot with 2500
iterations.
Bspec: 21829
Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1522946544-11524-1-git-send-email-gaurav.k.singh@intel.com
Radhakrishna Sripada [Wed, 4 Apr 2018 22:59:57 +0000 (15:59 -0700)]
drm/i915: Fix memory leak in intel_hdcp auth
Static code analysis tool reported memory leak in
intel_hdcp_auth_downstream. Fixing the memory leak.
v2: Rebase, move free to a cleanup label(Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180404225957.7457-1-radhakrishna.sripada@intel.com
Chris Wilson [Thu, 5 Apr 2018 12:37:14 +0000 (13:37 +0100)]
drm/i915: Only call finish_reset after a prepare_reset
If we skip the intel_prepare_reset(), we should also skip the
intel_display_reset(). If we we use a flag set by intel_prepare_reset()
then we do not have to second guess based on external user controlled
state whether or not the prepare was called before deciding to finish
it after the reset. igt/gem_eio is one such example that may tweak
i915.reset faster than the code is expecting, leading to
[ 190.233528] =====================================
[ 190.233534] WARNING: bad unlock balance detected!
[ 190.233540]
4.16.0-rc7-g335ef9849310-drmtip_10+ #1 Tainted: G U
[ 190.233547] -------------------------------------
[ 190.233553] gem_eio/1348 is trying to release lock (crtc_ww_class_acquire) at:
[ 190.233569] [<
ffffffff895c7810>] drm_modeset_acquire_fini+0x0/0x60
[ 190.233575] but there are no more locks to release!
[ 190.233580]
other info that might help us debug this:
[ 190.233588] 3 locks held by gem_eio/1348:
[ 190.233592] #0: (&f->f_pos_lock){+.+.}, at: [<
00000000ab90c784>] __fdget_pos+0x3a/0x50
[ 190.233607] #1: (sb_writers#11){.+.+}, at: [<
00000000e1529265>] vfs_write+0x188/0x1a0
[ 190.233622] #2: (&attr->mutex){+.+.}, at: [<
0000000011f40afe>] simple_attr_write+0x36/0xd0
[ 190.233635]
stack backtrace:
[ 190.233644] CPU: 0 PID: 1348 Comm: gem_eio Tainted: G U
4.16.0-rc7-g335ef9849310-drmtip_10+ #1
[ 190.233655] Hardware name: Dell Inc. OptiPlex GX280 /0G8310, BIOS A04 02/09/2005
[ 190.233664] Call Trace:
[ 190.233674] dump_stack+0x67/0x95
[ 190.233682] ? drm_modeset_backoff+0x1b0/0x1b0
[ 190.233690] print_unlock_imbalance_bug+0xd2/0xe0
[ 190.233698] ? drm_modeset_backoff+0x1b0/0x1b0
[ 190.233704] lock_release+0x23e/0x300
[ 190.233712] drm_modeset_acquire_fini+0x16/0x60
[ 190.233835] intel_finish_reset+0x72/0x160 [i915]
[ 190.233894] i915_reset_device+0x1e9/0x240 [i915]
[ 190.233953] ? __intel_get_crtc_scanline+0x1c0/0x1c0 [i915]
[ 190.233962] ? work_on_cpu_safe+0x50/0x50
[ 190.234020] i915_handle_error+0x1f2/0x470 [i915]
[ 190.234031] ? __might_fault+0x39/0x90
[ 190.234037] ? __might_fault+0x39/0x90
[ 190.234099] i915_wedged_set+0x7f/0xc0 [i915]
[ 190.234107] simple_attr_write+0xb0/0xd0
[ 190.234117] full_proxy_write+0x51/0x80
[ 190.234125] __vfs_write+0x21/0x140
[ 190.234133] ? rcu_read_lock_sched_held+0x6f/0x80
[ 190.234140] ? rcu_sync_lockdep_assert+0x29/0x50
[ 190.234147] ? __sb_start_write+0x152/0x1f0
[ 190.234152] ? __sb_start_write+0x168/0x1f0
[ 190.234159] vfs_write+0xbd/0x1a0
[ 190.234166] SyS_write+0x40/0xa0
[ 190.234173] ? do_syscall_64+0x19/0x1b0
[ 190.234180] do_syscall_64+0x6b/0x1b0
[ 190.234188] entry_SYSCALL_64_after_hwframe+0x42/0xb7
[ 190.234196] RIP: 0033:0x7f84c1b392b7
[ 190.234201] RSP: 002b:
00007f84b6755b00 EFLAGS:
00000293 ORIG_RAX:
0000000000000001
[ 190.234211] RAX:
ffffffffffffffda RBX:
0000000000000046 RCX:
00007f84c1b392b7
[ 190.234218] RDX:
0000000000000002 RSI:
000055ec20abc8d6 RDI:
0000000000000046
[ 190.234225] RBP:
000055ec20abc8d6 R08:
0000000000000000 R09:
0000000000000000
[ 190.234231] R10:
0000000000000000 R11:
0000000000000293 R12:
0000000000000002
[ 190.234238] R13:
0000000000000000 R14:
00007f84b0000b20 R15:
000055ec20ce4eb8
Testcase: igt/gem_eio
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405123714.3638-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 4 Apr 2018 09:33:29 +0000 (10:33 +0100)]
drm/i915/selftests: Add basic sanitychecks for execlists
Before adding a new feature to execlists submission, we should endeavour
to cover the baseline behaviour with selftests. So start the ball
rolling.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180404093329.5383-1-chris@chris-wilson.co.uk
Xidong Wang [Wed, 4 Apr 2018 09:38:24 +0000 (10:38 +0100)]
drm/i915: Do no use kfree() to free a kmem_cache_alloc() return value
Along the eb_lookup_vmas() error path, the return value from
kmem_cache_alloc() was freed using kfree(). Fix it to use the proper
kmem_cache_free() instead.
Fixes: d1b48c1e7184 ("drm/i915: Replace execbuf vma ht with an idr")
Signed-off-by: Xidong Wang <wangxidong_97@163.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v4.14+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180404093824.9313-1-chris@chris-wilson.co.uk
Ramalingam C [Mon, 2 Apr 2018 10:10:33 +0000 (15:40 +0530)]
drm/i915: Check hdcp key loadability
HDCP1.4 key can be loaded, only when Power well #1 is enabled and cdclk
is enabled. Using the I915 power well infrastruture, above requirement
is verified.
This patch enables the hdcp initialization for HSW, BDW, and BXT.
v2:
Choose the PW# based on the platform.
v3:
No Changes.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1522663834-24482-4-git-send-email-ramalingam.c@intel.com
Ramalingam C [Mon, 2 Apr 2018 10:10:32 +0000 (15:40 +0530)]
drm/i915: Read Vprime thrice incase of mismatch
In case of V prime mismatch, DP HDCP spec mandates the re-read of
Vprime atleast twice.
This patch needed for DP HDCP1.4 CTS Test: 1B-05.
v2:
Moved the V' validation into a function for retry. [Sean Paul]
v3:
Removed Inline keyword and DRM_DEBUG_KMS are used [Sean Paul]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1522663834-24482-3-git-send-email-ramalingam.c@intel.com
Ramalingam C [Mon, 2 Apr 2018 11:50:22 +0000 (17:20 +0530)]
drm/i915: Read HDCP R0 thrice in case of mismatch
As per DP spec when R0 mismatch is detected, HDCP source supported
re-read the R0 atleast twice.
And For HDMI and DP minimum wait required for the R0 availability is
100mSec. So this patch changes the wait time to 100mSec but retries
twice with the time interval of 100mSec for each attempt.
This patch is needed for DP HDCP1.4 CTS Test: 1A-06.
v2:
No Change
v3:
Comment on R0 retry is moved closer to the code[Seanpaul]
v4:
Removing unwanted noise introduced in v3.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1522669822-2508-1-git-send-email-ramalingam.c@intel.com
Chris Wilson [Tue, 3 Apr 2018 18:35:37 +0000 (19:35 +0100)]
drm/i915: Store preemption capability in engine->flags
Let's avoid having to delve down the pointer chain to see if the i915
device has support for preemption and store that on the engine, which
made the decision in the first place!
v2: Refactor common preemption policy between execlists/guc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180403183537.5522-1-chris@chris-wilson.co.uk
Chris Wilson [Sat, 31 Mar 2018 13:06:26 +0000 (14:06 +0100)]
drm/i915/execlists: Track begin/end of execlists submission sequences
We would like to start doing some bookkeeping at the beginning, between
contexts and at the end of execlists submission. We already mark the
beginning and end using EXECLISTS_ACTIVE_USER, to provide an indication
when the HW is idle. This give us a pair of sequence points we can then
expand on for further bookkeeping.
v2: Refactor guc submission to share the same begin/end.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180331130626.10712-1-chris@chris-wilson.co.uk
Rodrigo Vivi [Fri, 30 Mar 2018 18:52:33 +0000 (11:52 -0700)]
Merge airlied/drm-next into drm-intel-next-queued
Commit '
aee3bac0a3a8 ("drm/i915/psr: Tie PSR2 support to Y
coordinate requirement")' got merged to drm-intel-next-queued
but the variable was defined commit '
c5fe47327b06 ("drm: Add PSR
version 3 macro") who was merged through drm-misc.
So backmerging to get drm-intel-next-queued compiling back again.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
José Roberto de Souza [Wed, 28 Mar 2018 22:30:45 +0000 (15:30 -0700)]
drm/i915/psr: Set DPCD PSR2 enable bit when needed
In the 2 eDP1.4a pannels tested set or not set bit have no effect
but is better set it and comply with specification.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-9-jose.souza@intel.com
José Roberto de Souza [Wed, 28 Mar 2018 22:30:44 +0000 (15:30 -0700)]
drm/i915/psr: Cache sink synchronization latency
This value do not change overtime so better cache it than
fetch it every PSR enable.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-8-jose.souza@intel.com
José Roberto de Souza [Wed, 28 Mar 2018 22:30:43 +0000 (15:30 -0700)]
drm/i915/psr: Use PSR2 macro for PSR2
Cosmetic change.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-7-jose.souza@intel.com
José Roberto de Souza [Wed, 28 Mar 2018 22:30:42 +0000 (15:30 -0700)]
drm/i915/psr: Do not override PSR2 sink support
Sink can support our PSR2 requirements but userspace can request
a resolution that PSR2 hardware do not support, in this case it
was overwritten the PSR2 sink support.
Adding another flag here, this way if requested resolution changed
to a value that PSR2 hardware can handle, PSR2 can be enabled.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-6-jose.souza@intel.com
José Roberto de Souza [Wed, 28 Mar 2018 22:30:41 +0000 (15:30 -0700)]
drm/i915/psr/cnl: Enable Y-coordinate support in source
For Geminilake and Cannonlake+ the Y-coordinate support must be
enabled in PSR2_CTL too.
Spec: 7713 and 7720
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-5-jose.souza@intel.com
José Roberto de Souza [Wed, 28 Mar 2018 22:30:40 +0000 (15:30 -0700)]
drm/i915/psr: Tie PSR2 support to Y coordinate requirement
Although i915 don't implement aux sync frame through tests was
findout that pannels can do selective update when the y-coordinate
is also included in SDP, that is why it is required to run PSR2 in
i915.
So moving to only one place the sink requirements that the actual
driver needs to enable PSR2.
Also intel_psr2_config_valid() is called every time the crtc config
is computed, wasting some time every time it was checking for
Y coordinate requirement.
This allow us to nuke y_cord_support and some of VSC setup code that
was handling a scenario that would never happen(PSR2 without Y
coordinate).
Also here renaming intel_dp_get_y_cord_status() to
intel_dp_get_y_coord_required() as it more accurate to the name and
function of bit according to eDP spec.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-4-jose.souza@intel.com
José Roberto de Souza [Wed, 28 Mar 2018 22:30:39 +0000 (15:30 -0700)]
drm/i915/psr: Nuke aux frame sync
eDP spec states that aux frame is required to do PSR2 selective
update but i915 don't fully implement it. It sends the aux frame
sync messages but the value is always zero as the GTC is not enabled
in driver.
Through tests was findout that pannels can do selective update when
the y-coordinate is also included in SDP, that is why it is required
to run PSR2 in i915.
A dummy value is not useful at all to sink, so removing everything
related to aux frame sync, if GTC is enabled we can bring this back.
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-3-jose.souza@intel.com
José Roberto de Souza [Wed, 28 Mar 2018 22:30:38 +0000 (15:30 -0700)]
drm: Add DP last received PSR SDP VSC register and bits
This is a register to help debug what is in the last SDP VSC
packet revived by sink.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-2-jose.souza@intel.com
José Roberto de Souza [Wed, 28 Mar 2018 22:30:37 +0000 (15:30 -0700)]
drm: Add DP PSR2 sink enable bit
To comply with eDP1.4a this bit should be set when enabling PSR2.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-1-jose.souza@intel.com
Chris Wilson [Thu, 29 Mar 2018 22:45:19 +0000 (23:45 +0100)]
drm/i915: Only warn for might_sleep() before a slow wait_for_register
As intel_wait_for_register_fw() may use, and if successful only use, a
busy-wait loop, the might_sleep() warning is a little over-zealous.
Restrict it to a might_sleep_if() a slow timeout is specified (and so
the caller authorises use of a usleep).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180329224519.13598-2-chris@chris-wilson.co.uk
Chris Wilson [Thu, 29 Mar 2018 22:45:18 +0000 (23:45 +0100)]
drm/i915: Avoid sleeping inside per-engine reset
Only sleep and repeat when asked for a full device reset (ALL_ENGINES)
and avoid using sleeping waits when asked for a per-engine reset. The
goal is to be able to use a per-engine reset from hardirq/softirq/timer
context. A consequence is that our individual wait timeouts are a
thousand times shorter, on the order of a hundred microseconds rather
than hundreds of millisecond. This may make hitting the timeouts more
common, but hopefully the fallover to the full-device reset will be
sufficient to pick up the pieces.
Note, that the sleeps inside older gen (pre-gen8) have been left as they
are only used in full device reset mode.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180329224519.13598-1-chris@chris-wilson.co.uk
Lionel Landwerlin [Mon, 26 Mar 2018 09:08:28 +0000 (10:08 +0100)]
drm/i915/perf: add more debug message on perf open & configs
This will make it easier to spot issues related to config
creation/usage.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326090831.22686-9-lionel.g.landwerlin@intel.com
Lionel Landwerlin [Mon, 26 Mar 2018 09:08:26 +0000 (10:08 +0100)]
drm/i915: rename PPGTT/GGTT fields OA registers
We had a generic field name used across 2 registers but it feels like
it's clearer we make it obvious what register this field belongs to.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326090831.22686-7-lionel.g.landwerlin@intel.com
Lionel Landwerlin [Mon, 26 Mar 2018 09:08:25 +0000 (10:08 +0100)]
drm/i915/perf: remove empty line
This was added by mistake in commit
28964cf25ee67 ("drm/i915/perf:
disable NOA logic when not used").
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326090831.22686-6-lionel.g.landwerlin@intel.com
Lionel Landwerlin [Mon, 26 Mar 2018 09:08:23 +0000 (10:08 +0100)]
drm/i915/perf: simplify OA unit enabling on gen7
In commit
d79651522e89c ("drm/i915: Enable i915 perf stream for
Haswell OA unit") the enable/disable vfunc hadn't appear yet and the
same function would deal with enabling/disabling the OA unit.
This was split later on for gen8 but the gen7 retained some code that
isn't actually useful anymore.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326090831.22686-4-lionel.g.landwerlin@intel.com
Lionel Landwerlin [Mon, 26 Mar 2018 09:08:22 +0000 (10:08 +0100)]
drm/i915/perf: check the value of PROP_SAMPLE_OA uapi parameter
We've been a bit loose about this opening parameter. We should only
add the flag for writing OA reports when the value of this parameter
is != 0.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326090831.22686-3-lionel.g.landwerlin@intel.com
Lionel Landwerlin [Mon, 26 Mar 2018 13:39:48 +0000 (14:39 +0100)]
drm/i915/perf: enable perf support on ICL
No significant changes from either context offsets, nor report
formats, nor register whitelist.
v2: Also drop slice/unslice clock ratio changes (Matt)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326133949.12469-3-lionel.g.landwerlin@intel.com
Chris Wilson [Tue, 27 Mar 2018 21:01:57 +0000 (22:01 +0100)]
drm/i915: Include the HW breadcrumb whenever we trace the global_seqno
When we include a request's global_seqno in a GEM_TRACE it often helps
to know how that relates to the current breadcrumb as seen by the
hardware.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327210157.16896-3-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Michel Thierry [Wed, 28 Mar 2018 20:58:50 +0000 (13:58 -0700)]
drm/i915/guc: enable guc interrupts unconditionally in uc_resume
Probably lost while rebasing commit
eacd8391f977 ("drm/i915/guc: Keep GuC
interrupts enabled when using GuC").
Not really needed since i915_gem_init_hw is called before uc_resume, but
it brings symmetry to uc_suspend.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328205851.16188-1-michel.thierry@intel.com
Dave Airlie [Wed, 28 Mar 2018 23:25:13 +0000 (09:25 +1000)]
Merge branch 'drm-misc-next-fixes' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
- Mask mode type garbage from userspace (Ville)
Something went wrong on the misc tree side, but I'll pull the patch directly.
* 'drm-misc-next-fixes' of git://anongit.freedesktop.org/drm/drm-misc:
drm: Fix uabi regression by allowing garbage mode->type from userspace
Michal Wajdeczko [Mon, 26 Mar 2018 19:48:28 +0000 (19:48 +0000)]
drm/i915/guc: Trace messages from CT while in debug
During debug we may want to investigate all communication
from the Guc. Add proper tracing macros in debug config.
v2: convert remaining DRM_DEBUG into new CT_DEBUG (Michal)
v3: use dedicated Kconfig (Daniele)
v4: checkpatch
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-12-michal.wajdeczko@intel.com
Michal Wajdeczko [Tue, 27 Mar 2018 21:41:24 +0000 (21:41 +0000)]
drm/i915/guc: Handle default action received over CT
When running on platform with CTB based GuC communication enabled,
GuC to Host event data will be delivered as CT request message.
However, content of the data[1] of this CT message follows format
of the scratch register used in MMIO based communication, so some
code reuse is still possible.
v2: filter disabled messages (Daniele)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #1
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327214124.70680-1-michal.wajdeczko@intel.com
Michal Wajdeczko [Mon, 26 Mar 2018 19:48:26 +0000 (19:48 +0000)]
drm/i915/guc: Prepare to process incoming requests from CT
Requests are read from CT in the irq handler, but actual processing
will be done in the work thread. Processing of specific actions will
be added in the upcoming patches.
v2: don't use GEM_BUG_ON (Chris)
don't kmalloc too large buffer (Michal)
v3: rebased
v4: don't name it 'dispatch' (Michel) and fix checkpatch
add some documentation (Michal)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-10-michal.wajdeczko@intel.com
Michal Wajdeczko [Tue, 27 Mar 2018 12:14:39 +0000 (12:14 +0000)]
drm/i915/guc: Implement response handling in send_ct()
Instead of returning small data in response status dword,
GuC may append longer data as response message payload.
If caller provides response buffer, we will copy received
data and use number of received data dwords as new success
return value. We will WARN if response from GuC does not
match caller expectation.
v2: fix timeout and checkpatch warnings (Michal)
v3: fix checkpatch again (Michel)
update wait function name (Michal)
no need for spinlock_irqsave (MichalWi)
no magic numbers (MichalWi)
must check before use (Jani)
add some more documentation (Michal)
v4: update documentation (Michal)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #2.5
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327121439.70096-1-michal.wajdeczko@intel.com
Michal Wajdeczko [Mon, 26 Mar 2018 19:48:24 +0000 (19:48 +0000)]
drm/i915/guc: Use better name for helper wait function
In next patch we will introduce another way of waiting for the response
that will use RECV buffer. To avoid misleading names, rename old wait
function to reflect the fact that it is based on descriptor update.
v2: fix comment style (Michal)
v3: use more specific name (Michel)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-8-michal.wajdeczko@intel.com
Michal Wajdeczko [Mon, 26 Mar 2018 19:48:23 +0000 (19:48 +0000)]
drm/i915/guc: Prepare to handle messages from CT RECV buffer
GuC can respond to our commands not only by updating SEND buffer
descriptor, but can also send a response message over RECV buffer.
Guc can also send unsolicited request messages over RECV buffer.
Let's start reading those messages and make placeholders
for actual response/request handlers.
v2: misc improvements (Michal)
v3: change response detection (Michal)
invalid status is protocol error (Michal)
v4: rebase
v5: fix checkpatch (Michel)
don't use fields before check (Jani)
add some documentation (Michal)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> # 4.5
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-7-michal.wajdeczko@intel.com
Michal Wajdeczko [Mon, 26 Mar 2018 19:48:22 +0000 (19:48 +0000)]
drm/i915/guc: Make event handler a virtual function
On platforms with CTB based GuC communications, we will handle
GuC events in a different way. Let's make event handler a virtual
function to allow easy switch between those variants.
Credits-to: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-6-michal.wajdeczko@intel.com
Michal Wajdeczko [Mon, 26 Mar 2018 19:48:21 +0000 (19:48 +0000)]
drm/i915/guc: Implement response handling in send_mmio()
We're using data encoded in the status MMIO as return value from send
function, but GuC may also write more data in remaining MMIO regs.
Let's copy content of these registers to the buffer provided by caller.
v2: new line (Michel)
v3: updated commit message
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-5-michal.wajdeczko@intel.com
Michal Wajdeczko [Mon, 26 Mar 2018 19:48:20 +0000 (19:48 +0000)]
drm/i915/guc: Prepare send() function to accept bigger response
This is a preparation step for the upcoming patches.
We already can return some small data decoded from the command
status, but we will need more in the future.
v2: add explicit response buf size
v3: squash with helper patch
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-4-michal.wajdeczko@intel.com
Michal Wajdeczko [Mon, 26 Mar 2018 19:48:19 +0000 (19:48 +0000)]
drm/i915/guc: Add support for data reporting in GuC responses
GuC may return additional data in the response message.
Format and meaning of this data is action specific. We will
use this non-negative data as a new success return value.
Currently used actions don't return data that way yet.
v2: fix prohibited space after '~' (Michel)
update commit message (Daniele)
v3: rebase
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-3-michal.wajdeczko@intel.com
Michal Wajdeczko [Mon, 26 Mar 2018 19:48:18 +0000 (19:48 +0000)]
drm/i915/guc: Add documentation for MMIO based communication
As we are going to extend our use of MMIO based communication,
try to explain its mechanics and update corresponding definitions.
v2: fix checkpatch MACRO_ARG_REUSE
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Kelvin Gardiner <kelvin.gardiner@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-2-michal.wajdeczko@intel.com
Chris Wilson [Tue, 27 Mar 2018 21:01:36 +0000 (22:01 +0100)]
drm/i915/execlists: Reset ring registers on rebinding contexts
Tvrtko uncovered a fun issue with recovering from a wedge device. In his
tests, he wedged the driver by injecting an unrecoverable hang whilst a
batch was spinning. As we reset the gpu in the middle of the spinner,
when resumed it would continue on from the next instruction in the ring
and write it's breadcrumb. However, on wedging we updated our
bookkeeping to indicate that the GPU had completed executing and would
restart from after the breadcrumb; so the emission of the stale
breadcrumb from before the reset came as a bit of a surprise.
A simple fix is to when rebinding the context into the GPU, we update
the ring register state in the context image to match our bookkeeping.
We already have to update the RING_START and RING_TAIL, so updating
RING_HEAD as well is trivial. This works because whenever we unbind the
context, we keep the bookkeeping in check; and on wedging we unbind all
contexts.
Testcase: igt/gem_eio
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327210136.16750-1-chris@chris-wilson.co.uk
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Paulo Zanoni [Tue, 9 Jan 2018 23:28:35 +0000 (21:28 -0200)]
drm/i915/gen11: add support for reading the timestamp frequency
The only thing that differs here is that the crystal clock freq now
has four possible values.
This patch gets rid of the "Unknown gen, unable to compute..." message
at boot for gen11.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109232835.11478-18-paulo.r.zanoni@intel.com
Yaodong Li [Thu, 22 Mar 2018 23:59:22 +0000 (16:59 -0700)]
drm/i915: Use correct reST syntax for WOPCM and GuC kernel-doc diagrams
GuC Address Space and WOPCM Layout diagrams won't be generated correctly by
sphinx build if not using proper reST syntax.
This patch uses reST literal blocks to make sure GuC Address Space and
WOPCM Layout diagrams to be generated correctly, and it also corrects some
errors in the diagram description.
v2:
- Fixed errors in diagram description
v3:
- Updated GuC Address Space kernel-doc based on Michal's suggestion
v4:
- Added WOPCM layout and GuC address space docs into i915.rst (Joonas)
Signed-off-by: Jackie Li <yaodong.li@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1521763162-11424-1-git-send-email-yaodong.li@intel.com
Dave Airlie [Wed, 28 Mar 2018 04:49:19 +0000 (14:49 +1000)]
Merge tag 'drm-amdkfd-next-2018-03-27' of git://people.freedesktop.org/~gabbayo/linux into drm-next
- GPUVM support for dGPUs
- KFD events support for dGPUs
- Fix live-lock situation when restoring multiple evicted processes
- Fix VM page table allocation on large-bar systems
- Fix for build failure on frv architecture
* tag 'drm-amdkfd-next-2018-03-27' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Use ordered workqueue to restore processes
drm/amdgpu: Fix acquiring VM on large-BAR systems
drm/amdkfd: Add module option for testing large-BAR functionality
drm/amdkfd: Kmap event page for dGPUs
drm/amdkfd: Add ioctls for GPUVM memory management
drm/amdkfd: Add TC flush on VMID deallocation for Hawaii
drm/amdkfd: Allocate CWSR trap handler memory for dGPUs
drm/amdkfd: Add per-process IDR for buffer handles
drm/amdkfd: Aperture setup for dGPUs
drm/amdkfd: Remove limit on number of GPUs
drm/amdkfd: Populate DRM render device minor
drm/amdkfd: Create KFD VMs on demand
drm/amdgpu: Add kfd2kgd interface to acquire an existing VM
drm/amdgpu: Add helper to turn an existing VM into a compute VM
drm/amdgpu: Fix initial validation of PD BO for KFD VMs
drm/amdgpu: Move KFD-specific fields into struct amdgpu_vm
drm/amdkfd: fix uninitialized variable use
drm/amdkfd: add missing include of mm.h
Dave Airlie [Wed, 28 Mar 2018 04:47:26 +0000 (14:47 +1000)]
Merge tag 'drm-intel-next-fixes-2018-03-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Display fixes for booting with MST hub lid closed and display
freezing after hibernation (fd.o bugs 105470 & 105196)
- Fix for a very rare interrupt handling race resulting in GPU hang
* tag 'drm-intel-next-fixes-2018-03-27' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Fix hibernation with ACPI S0 target state
drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt
drm/i915: Specify which engines to reset following semaphore/event lockups
drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
Dave Airlie [Wed, 28 Mar 2018 04:30:41 +0000 (14:30 +1000)]
Backmerge tag 'v4.16-rc7' into drm-next
Linux 4.16-rc7
This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
Lucas De Marchi [Tue, 20 Mar 2018 22:06:37 +0000 (15:06 -0700)]
drm/i915: reorder dpll_info members
Remove 4-bytes hole in this struct an reorder tables accordingly. This
also changes the last element of the tables to be more future-proof.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320220637.21480-8-lucas.demarchi@intel.com
Lucas De Marchi [Tue, 20 Mar 2018 22:06:36 +0000 (15:06 -0700)]
drm/i915: use flags from dpll_info embedded in intel_shared_dpll
Replace all users of pll->flags to use pll->info.flags.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320220637.21480-7-lucas.demarchi@intel.com
Lucas De Marchi [Tue, 20 Mar 2018 22:06:35 +0000 (15:06 -0700)]
drm/i915: use id from intel_shared_dpll.info
Replace all users of pll->id to use pll->info->id. In functions using
this more than once it was preferred to add an id variable to make the
code easier to read.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320220637.21480-6-lucas.demarchi@intel.com
Lucas De Marchi [Tue, 20 Mar 2018 22:06:34 +0000 (15:06 -0700)]
drm/i915: use name from intel_shared_dpll.info
Replace all users of pll->name to use pll->info->name.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320220637.21480-5-lucas.demarchi@intel.com
Lucas De Marchi [Tue, 20 Mar 2018 22:06:33 +0000 (15:06 -0700)]
drm/i915: use funcs from intel_shared_dpll.info
Replace all users of pll->funcs.* to use
pll->info->funcs->*. The extra indirection here is not on any critical
path and we can leave all const data together.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320220637.21480-4-lucas.demarchi@intel.com
Lucas De Marchi [Tue, 20 Mar 2018 22:06:32 +0000 (15:06 -0700)]
drm/i915: add dpll_info inside intel_shared_dpll
This way we can stop copying fields from dpll_info to intel_shared_dpll
one by one. The migration of each field will come on separate patches.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320220637.21480-3-lucas.demarchi@intel.com
Lucas De Marchi [Tue, 20 Mar 2018 22:06:31 +0000 (15:06 -0700)]
drm/i915: move dpll_info to header
This will allow the struct to be embedded in intel_shared_dpll.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320220637.21480-2-lucas.demarchi@intel.com
Lucas De Marchi [Mon, 19 Mar 2018 17:37:20 +0000 (10:37 -0700)]
drm/i915: Reword warning for missing cases
In some places we end up converting switch statements to a series of
if/else, particularly when introducing helper functions to handle a
group of cases. It's tempting to either leave a wrong warning (since now
we don't have a switch case anymore) or to convert to WARN(1, ...),
but we can just provide a better message and avoid the doubt when such
conversions arrise.
Introducing a warning inside i915_driver_load() just for tests we get:
[ 4535.233717] Missing case (ret == 0)
[ 4535.233868] WARNING: CPU: 1 PID: 795 at drivers/gpu/drm/i915/i915_drv.c:1341 i915_driver_load+0x42/0x10e0 [i915]
which is clear enough.
v2: remove __func__ since this is already on the warning.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180319173720.6974-1-lucas.demarchi@intel.com
Chris Wilson [Mon, 26 Mar 2018 11:50:34 +0000 (12:50 +0100)]
drm/i915/execlists: Avoid kicking the submission too early for rescheduling
If the request is still waiting on external fences, it has not yet been
submitted to the HW queue and so we can forgo kicking the submission
tasklet when re-evaluating its priority.
This should have no impact other than reducing the number of tasklet
wakeups under signal heavy workloads (e.g. switching between engines).
v2: Use prebaked container_of()
References:
f6322eddaff7 ("drm/i915/preemption: Allow preemption between submission ports")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326115044.2505-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Chris Wilson [Mon, 26 Mar 2018 11:50:36 +0000 (12:50 +0100)]
drm/i915: Include submission tasklet state in engine dump
For the off-chance we have an interrupt posted and haven't processed the
CSB.
v2: Include tasklet enable/disable state for good measure.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326115044.2505-4-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Chris Wilson [Sat, 24 Mar 2018 12:58:29 +0000 (12:58 +0000)]
drm/i915/execlists: Clear user-active flag on preemption completion
When cancelling the requests and clearing out the ports following a
successful preemption completion, also clear the active flag. I had
assumed that all preemptions would be followed by an immediate dequeue
(preserving the active user flag), but under rare circumstances we may
be triggering a preemption for the second port only for it to have
completed before the preemotion kicks in; leaving execlists->active set
even though the system is now idle.
We can clear the flag inside the common execlists_cancel_port_requests()
as the other users also expect the semantics of active being cleared.
Fixes: f6322eddaff7 ("drm/i915/preemption: Allow preemption between submission ports")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180324125829.27026-1-chris@chris-wilson.co.uk
Imre Deak [Thu, 22 Mar 2018 14:36:42 +0000 (16:36 +0200)]
drm/i915: Fix hibernation with ACPI S0 target state
After
commit
dd9f31c7a3887950cbd0d49eb9d43f7a1518a356
Author: Imre Deak <imre.deak@intel.com>
Date: Wed Aug 16 17:46:07 2017 +0300
drm/i915/gen9+: Set same power state before hibernation image
save/restore
during hibernation/suspend the power domain functionality got disabled,
after which resume could leave it incorrectly disabled if the ACPI
target state was S0 during suspend and i915 was not loaded by the loader
kernel.
This was caused by not considering if we resumed from hibernation as the
condition for power domains reiniting.
Fix this by simply tracking if we suspended power domains during system
suspend and reinit power domains accordingly during resume. This will
result in reiniting power domains always when resuming from hibernation,
regardless of the platform and whether or not i915 is loaded by the
loader kernel.
The reason we didn't catch this earlier is that the enabled/disabled
state of power domains during PMSG_FREEZE/PMSG_QUIESCE is platform
and kernel config dependent: on my SKL the target state is S4
during PMSG_FREEZE and (with the driver loaded in the loader kernel)
S0 during PMSG_QUIESCE. On the reporter's machine it's S0 during
PMSG_FREEZE but (contrary to this) power domains are not initialized
during PMSG_QUIESCE since i915 is not loaded in the loader kernel, or
it's loaded but without the DMC firmware being available.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105196
Reported-and-tested-by: amn-bas@hotmail.com
Fixes: dd9f31c7a388 ("drm/i915/gen9+: Set same power state before hibernation image save/restore")
Cc: amn-bas@hotmail.com
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322143642.26883-1-imre.deak@intel.com
(cherry picked from commit
0f90603c33bdf6575cfdc81edd53f3f13ba166fb)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 21 Mar 2018 09:10:27 +0000 (09:10 +0000)]
drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt
We were relying on the uncached reads when processing the CSB to provide
ourselves with the serialisation with the interrupt handler (so we could
detect new interrupts in the middle of processing the old one). However,
in commit
767a983ab255 ("drm/i915/execlists: Read the context-status HEAD
from the HWSP") those uncached reads were eliminated (on one path at
least) and along with them our serialisation. The result is that we
would very rarely miss notification of a new interrupt and leave a
context-switch unprocessed, hanging the GPU.
Fixes: 767a983ab255 ("drm/i915/execlists: Read the context-status HEAD from the HWSP")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321091027.21034-1-chris@chris-wilson.co.uk
(cherry picked from commit
9153e6b7c85edbc89e874e5c83f86217c53dcfaf)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Tue, 20 Mar 2018 10:04:48 +0000 (10:04 +0000)]
drm/i915: Specify which engines to reset following semaphore/event lockups
If the GPU is stuck waiting for an event or for a semaphore, we need to
reset the GPU in order to recover. We have to tell the reset routine
which engines we want reset, but we were still using the old interface
and declaring it as "not-fatal".
Fixes: 14b730fcb8d9 ("drm/i915/tdr: Prepare error handler to accept mask of hung engines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320100449.1360-1-chris@chris-wilson.co.uk
(cherry picked from commit
ca98317b89428e6ac17be0938b467ed78654dd56)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Dhinakaran Pandiyan [Wed, 14 Mar 2018 05:48:25 +0000 (22:48 -0700)]
drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
If bios sets up an MST output and hardware state readout code sees this is
an SST configuration, when disabling the encoder we end up calling
->post_disable_dp() hook instead of the MST version. Consequently, we write
to the DP_SET_POWER dpcd to set it D3 state. Further along when we try
enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up
the MST hub. This results in continuous link training failures which keep
the system busy delaying boot. We could identify bios MST boot discrepancy
and handle it accordingly but a simple way to solve this is to write to the
DP_SET_POWER dpcd for MST too.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 5ea2355a100a ("drm/i915/mst: Use MST sideband message transactions for dpms control")
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180314054825.1718-1-dhinakaran.pandiyan@intel.com
(cherry picked from commit
ad260ab32a4d94fa974f58262f8000472d34fd5b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Dave Airlie [Mon, 26 Mar 2018 00:01:11 +0000 (10:01 +1000)]
Merge branch 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux into drm-next
Last pull for 4.17. Highlights:
- Vega12 support
- A few more bug fixes and cleanups for powerplay
* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (77 commits)
drm/amd/pp: clean header file hwmgr.h
drm/amd/pp: use mlck_table.count for array loop index limit
drm/amdgpu: Add an ATPX quirk for hybrid laptop
drm/amdgpu: fix spelling mistake: "asssert" -> "assert"
drm/amd/pp: Add new asic support in pp_psm.c
drm/amd/pp: Clean up powerplay code on Vega12
drm/amd/pp: Add smu irq handlers for legacy asics
drm/amd/pp: Fix set wrong temperature range on smu7
drm/amdgpu: Don't change preferred domian when fallback GTT v5
drm/amdgpu: Fix NULL ptr on driver unload due to init failure.
drm/amdgpu: fix "mitigate workaround for i915"
drm/amd/pp: Add smu irq handlers in sw_init instand of hw_init
drm/amd/pp: Refine register_thermal_interrupt function
drm/amdgpu: Remove wrapper layer of cgs irq handling
drm/amd/powerplay: Return per DPM level clock
drm/amd/powerplay: Remove the SOC floor voltage setting
drm/amdgpu: no job timeout setting on compute queues
drm/amdgpu: add vega12 pci ids (v2)
drm/amd/powerplay: add the hw manager for vega12 (v4)
drm/amd/powerplay: add the smu manager for vega12 (v4)
...
Linus Torvalds [Sun, 25 Mar 2018 22:44:30 +0000 (12:44 -1000)]
Linux 4.16-rc7
Linus Torvalds [Sun, 25 Mar 2018 17:45:10 +0000 (07:45 -1000)]
Merge tag 'dmaengine-fix-4.16-rc7' of git://git./linux/kernel/git/vkoul/slave-dma
Pull dmaengine fix from Vinod Koul:
"One small fix for stm32-dmamux fixing buffer overflow"
* tag 'dmaengine-fix-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma:
dmaengine: stm32-dmamux: fix a potential buffer overflow
Linus Torvalds [Sun, 25 Mar 2018 17:36:02 +0000 (07:36 -1000)]
Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 and PTI fixes from Ingo Molnar:
"Misc fixes:
- fix EFI pagetables freeing
- fix vsyscall pagetable setting on Xen PV guests
- remove ancient CONFIG_X86_PPRO_FENCE=y - x86 is TSO again
- fix two binutils (ld) development version related incompatibilities
- clean up breakpoint handling
- fix an x86 self-test"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Don't use IST entry for #BP stack
x86/efi: Free efi_pgd with free_pages()
x86/vsyscall/64: Use proper accessor to update P4D entry
x86/cpu: Remove the CONFIG_X86_PPRO_FENCE=y quirk
x86/boot/64: Verify alignment of the LOAD segment
x86/build/64: Force the linker to use 2MB page size
selftests/x86/ptrace_syscall: Fix for yet more glibc interference
Linus Torvalds [Sun, 25 Mar 2018 17:34:50 +0000 (07:34 -1000)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Make posix clock ID usage Spectre-safe"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Protect posix clock array access against speculation
projects / openwrt / staging / blogic.git / log