Daniel Golle [Tue, 23 Apr 2024 12:08:02 +0000 (13:08 +0100)]
generic: mt7530: move accepted patches to backport-6.{1,6}
Move two accepted patches for the MT7530 DSA driver from pending-6.{1,6}
to backport-6.{1,6}.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 23 Apr 2024 11:14:07 +0000 (12:14 +0100)]
mediatek: correct address of MT753x switch IC
For all boards currently working with the mt7530 DSA driver we can
be sure that the address of the switch on the MDIO bus is 31 --
simply because that address is hard-coded in the driver and the
address from the Device Tree is being ignore.
An upcoming patch will add support for MT753x ICs which are programmed
to addresses different from 0x1f using bootstrap pins. As a result the
address from the Device Tree will then be taken into account, which
will break currently working boards which got the address set to
anything else than 31.
While at it also unify the syntax in Device Tree to always us a decimal
value for the 'reg' property.
* mt7622-buffalo-wsr-3200ax4s.dts
Cosmetic change 'reg = <0x1f>' -> 'reg = <31>'
* mt7622-dlink-eagle-pro-ai-ax3200-a1.dtsi
Wrong address: 0 -> 31
* mt7622-elecom-wrc-x3200gst3.dts
Wrong address: 0 -> 31
* mt7622-linksys-e8450.dtsi
Wrong address: 0 -> 31
* mt7622-ruijie-rg-ew3200.dtsi
Wrong address: 0 -> 31
* mt7622-xiaomi-redmi-router-ax6s.dts
Wrong address: 0 -> 31
* mt7629-iptime-a6004mx.dts
Wrong address: 2 -> 31
* mt7981b-zbtlink-zbt-z8102ax.dts
Cosmetic change 'reg = <0x1f>' -> 'reg = <31>'
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Nick Hainke [Wed, 24 Apr 2024 05:19:30 +0000 (07:19 +0200)]
oxnas: drop target
The Upstream Linux community has discontinued support for the target.
Maintaining support for it downstream would require too much effort.
Moreover, it seems that the supported hardware is no longer deemed worthy
of it.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Bryan Roessler [Wed, 24 Apr 2024 01:37:25 +0000 (21:37 -0400)]
tools/zstd: enable position independent code compilation
Currently, trying to compile LLVM-BPF will fail with:
[2225/3517] Linking CXX shared library lib/libLLVM-15.so
FAILED: lib/libLLVM-15.so
/usr/bin/ld: staging_dir/host/lib/libzstd.a(zstd_common.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
So, to fix it enable PIC for the host ZSTD.
Fixes: #15247
Signed-off-by: Bryan Roessler <bryanroessler@gmail.com>
Daniel Golle [Tue, 23 Apr 2024 10:39:34 +0000 (11:39 +0100)]
scripts: ubinize-image.sh: fix support for static volume
Apart from being misspelled ('dymamic' vs. 'dynamic') and a mismatch of
the number of parameters, there is also simply no need to add the 'dynamic'
volume type keyword as 6th parameter as that's the default anyway.
Fix and simplify the ubinize-image.sh script to work as intended.
Fixes: 6c17d71973 ("scripts: ubinize-image.sh: support static volumes, make size optional")
Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 23 Apr 2024 22:34:30 +0000 (23:34 +0100)]
mediatek: mt7988a: sync dts compatible string
Use 'mediatek,mt7988a' instead of 'mediatek,mt7988' as compatible
string to be in-sync with upstream and no longer break the cpufreq
driver which was also kept in sync with upstream.
Fixes: 56dd6b473b ("mediatek: sync cpufreq support with changed compatible string")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Robert Marko [Mon, 1 Apr 2024 17:46:34 +0000 (19:46 +0200)]
bcm53xx: 6.6: fix ASM cache workaround linking
Kernel 6.6 checks for orphan sections and prints a warning about them,
which in turn will make CI fails as we have Werror enabled there.
Issue is that cache-v7-min.S produces .init.text section which is an
orphan section since it is not being handled by the vmlinux.lds.S linker
script.
So, lets put the generated .init.text section under .text.
Fixes: f0d8ce4f482c ("bcm53xx: add testing support for kernel 6.6")
Signed-off-by: Robert Marko <robimarko@gmail.com>
John Audia [Wed, 17 Apr 2024 19:01:37 +0000 (15:01 -0400)]
kernel: bump 6.6 to 6.6.28
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.28
Removed upstream:
pending-6.6/796-net-dsa-mt7530-trap-link-local-frames-regardless-of-.patch
All oither patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.28&id=
8b6c4b62582606c62074a7e7c64156f56d2785f2
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Wed, 17 Apr 2024 19:05:00 +0000 (15:05 -0400)]
x86: generic: config-6.6: add/remove default syms
Add new default and remove deprecated symbols introduced by 6.6.28[1]
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/x86/Kconfig?id=v6.6.28&id2=v6.6.27
Signed-off-by: John Audia <therealgraysky@proton.me>
Paweł Owoc [Mon, 4 Mar 2024 18:29:51 +0000 (19:29 +0100)]
qualcommax: ipq807x: use ath11k_patch_mac for RAX120v2
Use ath11k_patch_mac and ath11k_set_macflag functions for RAX120v2 (pre-caldata does not contain valid MAC addresses)
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Paweł Owoc [Mon, 29 Jan 2024 23:39:55 +0000 (00:39 +0100)]
qualcommax: ipq807x: use ath11k_patch_mac and ath11k_remove_regdomain for MX4200
Use ath11k_patch_mac, ath11k_remove_regdomain and ath11k_set_macflag functions for MX4200
(only v2 variant requires MAC patching)
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Paweł Owoc [Mon, 29 Jan 2024 22:36:58 +0000 (23:36 +0100)]
base-files: Add new functions for ath11k caldata
Add new functions for ath11k caldata:
- ath11k_patch_mac (from 0 to 5)
- ath11k_remove_regdomain
- ath11k_set_macflag (some pre-caldata have the nvMacFlag flag unset which is needed to change the MAC address)
Additionaly for ath10k caldata:
- ath10k_remove_regdomain
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Stefan Kalscheuer [Fri, 19 Apr 2024 15:31:24 +0000 (17:31 +0200)]
mwlwifi: update to version 10.4.10-
20240419
This update contains a minor fix to resolve "detected write beyond size
of field" warning during compilation:
* "replace [0] with []" (
1d0d08c)
All patches still apply.
References:
* https://github.com/openwrt/openwrt/issues/15108
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Connor Yoon [Tue, 19 Mar 2024 13:10:51 +0000 (14:10 +0100)]
ipq807x: add Spectrum SAX1V1K
Spectrum SAX1V1K is a AX WIFI router with 3 1G and 1 2.5G ports.
The router is provided to Spectrum customers.
It is OEM of Askey RT5010W
https://forum.openwrt.org/t/spectrum-sax1v1k-askey-rt5010w-openwrt-support/149923
It continues the original work by @MeisterLone to get this device supported.
Specifications:
```
• CPU: Qualcomm IPQ8072A Quad core Cortex-A53 2.2GHz
• RAM: 2048MB of DDR3
• Storage: 1024MB eMMC
• Ethernet: 3x 1G RJ45 ports (QCA8075) + 1 2.5G Port (QCA8081)
• WLAN:
• 2.4GHz: Qualcomm QCN5024 4x4 802.11b/g/n/ax 1174 Mbps PHY rate
• 5GHz: Qualcomm QCN5054 4x4 802.11a/b/g/n/ac/ax 2402 PHY rate
• LED: 1 gpio-controlled dual color led (blue/red)
• Buttons: 1x reset
• Power: 12V DC jack
```
Notes:
```
• This commit adds only single partition support, that means
sysupgrade is upgrading the current rootfs partition.
• Installation can be done by serial connection only.
• A poulated serial header is onboard
https://forum.openwrt.org/t/spectrum-sax1v1k-askey-rt5010w-openwrt-support/149923/6
• RX/TX is working, u-boot bootwait is active, secure boot is enabled.
```
Installation Instructions:
**Most part of the installation is performed from an initramfs image.**
Boot initramfs : Using serial connection
1. Boot up the device and wait till it displays "VERIFY_IB: Success. verify IB ok"
2. Once that message appears,
login with username 'root'
password serial number of your router in uppercase.
3. Use vi to paste the 'open.sh' script from @MeisterLone github on your device
https://github.com/MeisterLone/Askey-RT5010W-D187-REV6/blob/master/Patch/open.sh
4. chmod 755 open.sh
5. ./open.sh
6. Set your ip to 192.168.0.1
7. Run a TFTP server and host the initramfs image on the TFTP server and name it "recovery.img"
8. Reboot device. On boot it will try TFTP.
Install OpenWrt from initramfs image:
1. Use SCP (or other way) to transfer OpenWrt factory image
2. Connect to device using SSH (on a LAN port)
3. Flash firmware: sysupgrade
# sysupgrade -n -v /tmp/openwrt_sysupgrade.bin
4. Set U-boot env variable: bootcmd
# fw_setenv bootcmd "run fix_uboot; run setup_and_boot"
5. Reboot the device
# reboot
6. Once device is booted, residue of previous firmware will prevent openwrt to work properly.
Factory Reset is MUST required
# Once serial console is displaying to login, hold reset button for 10 sec
7. Now everything should be operational.
Note: this PR adds only single partition support, that means sysupgrade is
upgrading the current rootfs partition
Signed-off-by: Connor Yoon <j_connor@taliaent.com>
Tony Ambardar [Sat, 20 Apr 2024 01:23:00 +0000 (18:23 -0700)]
ubox: update to Git HEAD (2024-03-02)
d413903016c4 kmodloader: support duplicate module names and aliases
1c9aaefc119a kmodloader: fix memleak adding to avl tree
4c5c45c6beac kmodloader: fix invalid write during insmod, CodeQL warnings
6a59975afc2c kmodloader: improve memory accounting and deallocation
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Christian Marangi [Mon, 22 Apr 2024 09:26:18 +0000 (11:26 +0200)]
generic: 5.15: refresh kernel patches
Refresh kernel patches with make target/linux/refresh.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 22 Apr 2024 09:24:10 +0000 (11:24 +0200)]
pistachio: 6.1: refresh kernel patches
Refresh kernel patches with make target/linux/refresh.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 22 Apr 2024 09:21:08 +0000 (11:21 +0200)]
generic: 5.15: fix broken BoHong bh25q128as patch
Fix broken BoHong bh25q128as patch that used wrong define for kernel
5.15.
Fixes: 4cb814d403bb ("generic: 5.15: Make support for BoHong bh25q128as generic")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Felix Fietkau [Mon, 22 Apr 2024 08:59:19 +0000 (10:59 +0200)]
bridger: update to Git HEAD (2024-04-22)
ec8c620fd5f4 split bridge-local disable into rx and tx
40b1c5b6be4e flow: do not attempt to offload bridge-local flows
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Nick Hainke [Wed, 17 Apr 2024 22:18:47 +0000 (00:18 +0200)]
at91: 6.1: set testing kernel
Allow selecting 6.1 as testing kernel on at91.
Tested-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Thu, 18 Apr 2024 08:18:23 +0000 (10:18 +0200)]
at91: 6.1: update kernel config
Update the kernel config by running make kernel_oldconfig.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Fri, 19 Apr 2024 05:05:48 +0000 (07:05 +0200)]
at91: 6.1: import patch to fix pinctrl unused function warning
Fixes error in the form of [0]:
drivers/pinctrl/pinctrl-at91.c:1668:12: error: 'at91_gpio_resume' defined but not used [-Werror=unused-function]
1668 | static int at91_gpio_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-at91.c:1650:12: error: 'at91_gpio_suspend' defined but not used [-Werror=unused-function]
1650 | static int at91_gpio_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~
[0] - https://lore.kernel.org/all/
20221215164301.934805-1-arnd@kernel.org/
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Thu, 18 Apr 2024 08:10:39 +0000 (10:10 +0200)]
at91: 6.1: remove upstreamed patches
Remove the upstreamed patches.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Wed, 17 Apr 2024 22:15:30 +0000 (00:15 +0200)]
kernel/at91: Restore kernel files for v5.15
This is an automatically generated commit which aids following Kernel patch history,
as git will see the move and copy as a rename thus defeating the purpose.
See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
for the original discussion.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Wed, 17 Apr 2024 22:15:29 +0000 (00:15 +0200)]
kernel/at91: Create kernel files for v6.1 (from v5.15)
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Chen Minqiang [Mon, 22 Jan 2024 14:35:41 +0000 (22:35 +0800)]
ppp: add sourcefilter option support
This make source based IPv6 routing option available for
ppp/pptp/pppoe/pppoa
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
Georgi Valkov [Fri, 19 Apr 2024 07:19:00 +0000 (10:19 +0300)]
kernel: backport ipeth CDC NCM support
Fixes no communication with tethered iOS devices in CDC NCM mode.
Freshly booted iOS devices start in legacy mode, but are put into
NCM mode by the official Apple driver.
[1] https://github.com/torvalds/linux/commit/
a2d274c62e44b1995c170595db3865c6fe701226
Fixes: #12566
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: Foster Snowhill <forst@pen.gy>
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
[ better reference fixed issue ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Sun, 21 Apr 2024 16:23:30 +0000 (18:23 +0200)]
github: add labels to bug-report issue to better identify type
Add labels to bug-report issue to better identify type.
Also introduce label to-triage to better handle issue by CI actions.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Sun, 21 Apr 2024 16:15:58 +0000 (18:15 +0200)]
github: permits blank issue
Blank issue might be used by devs to create tracking issue or by
advanced user to report more strange issue.
These kind of issue won't be parsed and won't be tagged. Normally bBug
report should be used for 99% of the cases.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
R Maru [Fri, 8 Mar 2024 21:55:52 +0000 (15:55 -0600)]
generic: 5.15: Make support for BoHong bh25q128as generic
Move the patch for BoHong bh25q128as out of ramips to make it
generic. Not including 6.1.y since the mtd subsystem has changed,
and does not need these changes.
Patch was dropped with ramips updating to 6.1, hence we reintroudce it
here for 5.15 generic.
5.15.y functionality was verified on a Wavlink WL-WN586X3 Rev.a.
Signed-off-by: R Maru <deviantmaru@gmail.com>
[ rebase and add extra info in commit description ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Sat, 2 Mar 2024 14:40:00 +0000 (15:40 +0100)]
generic: 6.1: backport support for generic spi-nor from SFDP data
Backport patches for support of generic spi-nor from SFDP data for
kernel 6.1.
Kernel 5.15 have major rework of the info flags and it's not trustable
to backport this amount of changes and expect correct function of it.
All affected patches automatically refreshed using make
target/linux/refresh.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Sat, 20 Apr 2024 16:29:23 +0000 (18:29 +0200)]
toolchain/wrapper: fill and reference info.mk in staging_dir ext toolchain
Currently when external toolchain is used, a info.mk is created (with
to-be-filled values) but is never actually filled with real values and
is never actually used in rules.mk.
This info.mk is used down the code with special packages like libgcc to
reference info like gcc version and package special library.
To mimic what is done with internal toolchain, add the include in
rules.mk for info.mk also for external library and in fix
toolchain/wrapper to fill the staging_dir info.mk.
The logic is to check if the external toolchain provide an info.mk and
if it doesn't we at least fill the GCC_VERSION with the value set in the
.config file.
With this special library like libgcc correctly reference and have set the
GCC_VERSION variable.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Paul Donald [Fri, 12 Apr 2024 19:27:56 +0000 (21:27 +0200)]
lldpd: extended interface(s) parsing to handle patterns
For interface type parameters, the man page documents patterns:
```
*,!eth*,!!eth1
uses all interfaces, except interfaces starting with "eth",
but including "eth1".
```
* Renamed `_ifname` to `_l2dev`.
* get the l2dev via network_get_physdev (and not l3dev)
* Glob pattern `*` is also valid - use noglob for this
The net result is that now interface 'names' including globs '*' and '!'
inversions are included in the generated lldpd configs.
Temporarily `set -o noglob` and then `set +o noglob` to disable & enable
globbing respectively, because when we pass `*` as an interface choice,
other file and pathnames get sucked in from where the init script runs,
and the `*` never makes it to lldpd.
Tested extensively on: 22.03.6, 23.05.3
Signed-off-by: Paul Donald <newtwen+github@gmail.com>
[ squash with commit bumping release version ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Felix Fietkau [Fri, 19 Apr 2024 18:05:26 +0000 (20:05 +0200)]
uclient: update to Git HEAD (2024-04-19)
e8780fa7792a uclient: fix http regression
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Zoltan HERPAI [Sat, 23 Mar 2024 22:58:36 +0000 (23:58 +0100)]
sunxi: move KERNEL_LOADADDR into subtargets
As preparation for the arm926ej-s support which has a different
load address, move the KERNEL_LOADADDR into the subtargets.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Sat, 23 Mar 2024 17:35:58 +0000 (18:35 +0100)]
sunxi: move fpu feature flag into the subtargets
As the upcoming arm926ej-s does not have an FPU, move this flag
into the subtargets.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Thu, 18 Apr 2024 21:44:23 +0000 (21:44 +0000)]
sifiveu: 6.6: set testing kernel
Allow selecting 6.6 as testing kernel on sunxi.
Runtime-tested: SiFive Unleashed
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Thu, 18 Apr 2024 21:43:49 +0000 (21:43 +0000)]
sifiveu: 6.6: refresh patches
Refresh kernel patches.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Thu, 18 Apr 2024 21:15:30 +0000 (23:15 +0200)]
kernel/sifiveu: Restore kernel files for v6.1
This is an automatically generated commit which aids following Kernel patch history,
as git will see the move and copy as a rename thus defeating the purpose.
See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
for the original discussion.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Thu, 18 Apr 2024 21:15:30 +0000 (23:15 +0200)]
kernel/sifiveu: Create kernel files for v6.6 (from v6.1)
This is an automatically generated commit.
During a `git bisect` session, `git bisect --skip` is recommended.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Fri, 9 Feb 2024 10:12:54 +0000 (11:12 +0100)]
mxs: add kernel 6.6 as testing
Add new LTS kernel support.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Thu, 18 Apr 2024 16:49:27 +0000 (16:49 +0000)]
mxs: adjust DTS path for 6.6
For the ARM arch on 6.6, DTS files are moved into their vendor directories,
mimicking arm64. Reflect this in the image Makefile.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Felix Fietkau [Fri, 19 Apr 2024 15:56:17 +0000 (17:56 +0200)]
uclient: update to Git HEAD (2024-04-19)
704c78111a92 uclient-http: use ustream_ssl without ustream_fd
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 19 Apr 2024 15:56:02 +0000 (17:56 +0200)]
ustream-ssl: update to Git HEAD (2024-04-19)
524a76e5af78 ustream-ssl: add support for using a fd instead of ustream as backing
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle [Fri, 19 Apr 2024 09:55:46 +0000 (10:55 +0100)]
mediatek: backport PWM drivers
* MT7981 and MT7988 backported to Linux 6.1
* MT7988 backported to Linux 6.6
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Robert Marko [Mon, 8 Apr 2024 08:57:58 +0000 (10:57 +0200)]
uboot-mvebu: update to version 2024.04
Lets update to 2024.04 in order to drop all of the patches as they have
been merged upstream.
Tested on Methode eDPU.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Felix Fietkau [Thu, 18 Apr 2024 20:27:28 +0000 (22:27 +0200)]
uclient: update to Git HEAD (2024-04-18)
c2bf660d88ec lib: add log_msg callback to get more detailed log messages
9adb4ca5219d uclient-fetch: add uclient / ustream-ssl log messages (enabled via -v)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 18 Apr 2024 20:27:33 +0000 (22:27 +0200)]
ustream-ssl: update to Git HEAD (2024-04-18)
f9a28a9ce864 ustream-ssl: poll connection on incomplete reads
3c49e70c4622 ustream-ssl: increase number of read buffers
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 18 Apr 2024 11:18:21 +0000 (13:18 +0200)]
ustream-ssl: update to Git HEAD (2024-04-18)
60d8fbb5e669 mbedtls: handle session tickets for TLS 1.3
ac42af7981ae mbedtls: add ifdefs to fix legacy compatibility
af7c3532ad49 mbedtls: another cosmetic ifdef fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Paul Donald [Fri, 29 Mar 2024 15:04:30 +0000 (16:04 +0100)]
base-files: reduce IPv6 ULA prefix generation to a single call
Reduce calls and pipes and read from urandom once directly with hexdump
for the necessary 5 bytes of random data to build the 48 bit ULA Prefix.
Fewer calls and forks; finish quicker; less memory used.
Tested on: 23.05.3
Signed-off-by: Paul Donald <newtwen+github@gmail.com>
Robert Marko [Wed, 17 Apr 2024 10:01:02 +0000 (12:01 +0200)]
mac80211: ath11k: re-enable ipq807x coldboot calibration
It seems that move to kernel 6.6 somehow fixed the remoteproc restart so
now it properly restarts and thus coldboot calibration works as well.
ipq60xx still seems to be broken in a different way so keep it disabled.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Christian Marangi [Tue, 16 Apr 2024 14:44:41 +0000 (16:44 +0200)]
qca-nss-dp: add patch fixing rmmod and insmod
Add patch fixing rmmod and insmod. Lots of flawed logic fixed that
permits the module to correctly rmmod and insmod later.
Just to quote some change, use phy_detach instead of phy_disconnect, fix
exclusive reset_control that could only be used once, fix kernel panic
on second edma_cleanup, stop traffic before module exit...
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Stijn Tintel [Wed, 17 Apr 2024 21:29:00 +0000 (00:29 +0300)]
qoriq: add kernel 6.1 support
Add support for kernel 6.1 as testing kernel for qoriq. Refresh config
using `make kernel_oldconfig`.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Wed, 17 Apr 2024 21:23:36 +0000 (00:23 +0300)]
kernel/qoriq: Restore kernel files for v5.15
This is an automatically generated commit which aids following Kernel patch history,
as git will see the move and copy as a rename thus defeating the purpose.
See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
for the original discussion.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Wed, 17 Apr 2024 21:23:36 +0000 (00:23 +0300)]
kernel/qoriq: Create kernel files for v6.1 (from v5.15)
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Wed, 17 Apr 2024 21:23:10 +0000 (00:23 +0300)]
qoriq: refresh kernel 5.15 config
Done with `make kernel_oldconfig`.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Chukun Pan [Tue, 26 Mar 2024 15:16:05 +0000 (23:16 +0800)]
ipq807x: add support for Zbtlink ZBT-Z800AX
Hardware specifications:
SoC: Qualcomm IPQ8072A
RAM: 1GB of DDR4 600MHz
Flash1: Winbond W25Q64DW 8MB
Flash2: MX30UF2G28AD 256MB
WiFi1: QCN5024 2.4GHz AX 4x4
WiFi2: QCN5054 5GHz AX 4x4
Ethernet: 5x 1G RJ45 port
USB: 2x USB 3.0 (1x M.2)
Button: Reset, WPS
Flash instructions:
Upload factory.bin in stock firmware's
upgrade page, do not preserve settings.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Chukun Pan [Tue, 16 Apr 2024 15:10:02 +0000 (23:10 +0800)]
ipq-wifi: update to version 2024-04-16
Contains following updates:
* ipq8074: add Spectrum SAX1V1K BDF
* ipq8074: add Zbtlink ZBT-Z800AX BDF
* ipq8074: update regdb in Spectrum SAX1V1K BDF
* ipq6018: add Linksys MR7350 BDF
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Christian Marangi [Wed, 17 Apr 2024 09:28:58 +0000 (11:28 +0200)]
tools: zstd: update patch with upstream version
Proposed fixup has been replaced and merged with an advanced version.
install-pc-mt has been dropped and replaced for intall-pc MT=1 to
generate a .pc file with multithread libs.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Chen Minqiang [Mon, 22 Jan 2024 15:00:03 +0000 (23:00 +0800)]
qmi: add sourcefilter option support
This make source based IPv6 routing option available for qmi
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
Chen Minqiang [Mon, 22 Jan 2024 14:59:44 +0000 (22:59 +0800)]
mbim: add sourcefilter option support
This make source based IPv6 routing option available for mbim
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
Chen Minqiang [Mon, 22 Jan 2024 14:59:18 +0000 (22:59 +0800)]
ncm: add sourcefilter option support
This make source based IPv6 routing option available for ncm
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
Chuanhong Guo [Wed, 17 Apr 2024 04:09:07 +0000 (12:09 +0800)]
ipset: update to 7.21
release notes:
7.21: https://www.spinics.net/lists/netfilter-devel/msg85299.html
7.20: https://www.spinics.net/lists/netfilter-devel/msg85120.html
7.19: https://www.spinics.net/lists/netfilter-devel/msg82985.html
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Wed, 17 Apr 2024 04:12:25 +0000 (12:12 +0800)]
ipset: include libgen.h for basename
musl dropped the GNU version of basename prototype from string.h
in 1.2.5.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Zoltan HERPAI [Tue, 16 Apr 2024 22:42:56 +0000 (00:42 +0200)]
sunxi: fix network bringup on Olinuxino Micro boards
It's the A13-based Olinuxino Micro which has only wireless interfaces. The
A20-based board is a fully-fledged one which has an ethernet interface.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Hauke Mehrtens [Sat, 13 Apr 2024 17:22:41 +0000 (19:22 +0200)]
kernel: bump 5.15 to 5.15.155
Manual adapted the following patches:
generic/hack-5.15/221-module_exports.patch
octeontx/patches-5.15/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Robert Marko [Mon, 15 Apr 2024 08:59:46 +0000 (10:59 +0200)]
tools: mold: update to 2.30.0
Release Notes:
https://github.com/rui314/mold/releases/tag/v2.3.3
https://github.com/rui314/mold/releases/tag/v2.4.0
https://github.com/rui314/mold/releases/tag/v2.4.1
https://github.com/rui314/mold/releases/tag/v2.30.0
Signed-off-by: Robert Marko <robimarko@gmail.com>
Rodrigo Balerdi [Wed, 3 Apr 2024 03:30:46 +0000 (00:30 -0300)]
ipq40xx: whw03v2: enable additional 5 GHz channels
This device supports channel ranges 36-64 and 100-165, just like
others based on the same reference design, but its current DTS is
unnecessarily restricting these ranges to 36-48 and 149-165.
Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
Zoltan HERPAI [Tue, 16 Apr 2024 16:56:59 +0000 (16:56 +0000)]
sunxi: update a13-olimex-som DTS path
In preparation for supporting kernel 6.6, where the DTS files are grouped into
vendors - similarly to what arm64 has been doing all along -, update the
SUNXI_DTS var of this board to prepend it with SUNXI_DTS_DIR.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Tue, 16 Apr 2024 10:21:42 +0000 (12:21 +0200)]
pistachio: remove 5.15 support
Now that 6.1 is default, remove 5.15 support.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Tue, 16 Apr 2024 10:20:59 +0000 (12:20 +0200)]
pistachio: default to kernel 6.1
6.1 has been present as testing for some time now, so switch the
default to it.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Hauke Mehrtens [Mon, 15 Apr 2024 20:50:34 +0000 (22:50 +0200)]
kernel: Add missing config option
Kernel 6.1.83 allows to select CONFIG_GPIO_VF610, deactivate it by
default.
This fixes compilation of the armsr/armv8 target.
Fixes: 2ad898e091cb ("kernel: bump 6.1 to 6.1.83")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Mon, 15 Apr 2024 20:05:06 +0000 (22:05 +0200)]
Revert "elfutils: fix a missing typedef in the last update"
This reverts commit
a9e22ffa5028e303dc32d15f1ce5e1be4c20e125.
After doing a clean rebuild, it turns out that this change is not necessary
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Robert Marko [Mon, 15 Apr 2024 09:03:08 +0000 (11:03 +0200)]
tools: libdeflate: backport fix for AVX-VNNI
Trying to compile with new new enough GCC but older binutils that dont
support AVX-VNNI will error out on the assembler, so backport an upstream
fix for it.
Fixes: 338b463e1e97 ("tools: libdeflate: update to 1.20")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Felix Fietkau [Mon, 15 Apr 2024 10:32:35 +0000 (12:32 +0200)]
netifd: add missing error checks to packet steering script
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 15 Apr 2024 10:55:37 +0000 (12:55 +0200)]
elfutils: fix a missing typedef in the last update
Fixes perf
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Tony Ambardar [Tue, 5 Mar 2024 08:28:48 +0000 (00:28 -0800)]
tools/dwarves: add myself as PKG_MAINTAINER
Missed setting this when first adding package.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Felix Fietkau [Mon, 15 Apr 2024 09:19:44 +0000 (11:19 +0200)]
bridger: update to Git HEAD (2024-04-15)
3159bbe0a2eb improve isolation when selecting a fixed output port
c77a7a1ff74d nl: fix getting flow offload stats
a08e51e679dd add support for disabling bridge-local flows via config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Vince McKinsey [Sun, 31 Mar 2024 18:29:05 +0000 (14:29 -0400)]
ramips: Add support for D-Link DIR-3040 A1
This adds support for the A1 hardware revision of the DIR-3040.
It is an exact copy of the DIR-3060 save for some cosmetic changes to the housing.
Even going so far as having the same FCC ID.
Hardware specification:
SoC: MediaTek MT7621AT
Flash: Winbond W29N01HVSINA 128MB
RAM: Micron MT41K128M16JT-125 256MB
Ethernet: 5x 10/100/1000 Mbps
WiFi1: MT7615DN 2.4GHz N 2x2:2
WiFi2: MT7615DN 5GHz AC 2x2:2
WiFi3: MT7615N 5GHz AC 4x4:4
Button: WPS, Reset
Flash instructions:
OpenWrt can be installed via D-Link Recovery GUI:
NOTE: Seems to only work in Firefox on Windows.
Tried with Chrome on Windows, Firefox in Linux, and Chromium in Linux.
None of these other browsers worked.
1. Push and hold reset button (on the bottom of the device) until power led
starts flashing (about 10 secs or so) while plugging in the power cable.
2. Give it ~30 seconds, to boot the recovery mode GUI
3. Connect your client computer to LAN1 of the device
4. Set your client IP address manually to 192.168.0.2 / 255.255.255.0.
5. Call the recovery page for the device at http://192.168.0.1/
6. Use the provided emergency web GUI to upload and flash a new firmware to the device
Thanks to @Lucky1openwrt and @iivailo for creating the DIR-3060 DTS file and related changes,
so it was possible for me to adapt them to the DIR-3040, build images,
test and fix minor issues.
MAC Addresses:
| use | address | example |
| --- | --- | --- |
| LAN | label | f4:*:61 |
| WAN | label + 4 | f4:*:65 |
| WI1/2g | label + 2 | f4:*:63 |
| WI1/5g | label + 1 | f4:*:62 |
| WI2/5g | label + 3 | f4:*:64 |
The label MAC address was found in Factory, 0xe000
Checklist:
✓ nand
✓ ethernet
✓ button
✓ wifi2g
✓ wifi5g
✓ wifi5g
✓ mac
✓ led
Signed-off-by: Vince McKinsey <vincemckinsey@gmail.com>
Robert Marko [Sat, 13 Apr 2024 18:15:45 +0000 (20:15 +0200)]
tools: libdeflate: update to 1.20
Changes:
* Improved CRC-32 performance on recent x86 CPUs by adding
VPCLMULQDQ-accelerated implementations using 256-bit and 512-bit vectors.
* Improved Adler-32 performance on recent x86 CPUs by adding
VNNI-accelerated implementations using 256-bit and 512-bit vectors.
* Improved CRC-32 and Adler-32 performance on short inputs.
* Optimized the portable implementation of Adler-32.
* Added some basic optimizations for RISC-V.
* Dropped support for gcc versions older than v4.9 (released in 2014) and
clang versions older than v3.9 (released in 2016).
* Dropped support for CRC-32 acceleration on 32-bit ARM using the ARMv8 pmull or crc32 instructions.
This code only worked on CPUs that also have a 64-bit mode, and it was
already disabled on many compiler versions due to compiler limitations.
CRC-32 acceleration remains fully supported on 64-bit ARM.
Signed-off-by: Robert Marko <robimarko@gmail.com>
INAGAKI Hiroshi [Sun, 18 Feb 2024 06:01:51 +0000 (15:01 +0900)]
mvebu: fix LEDs on IIJ SA-W2
On IIJ SA-W2, some multiple LEDs have no "function" property and only
"color" property is available for the newer binding of LED on Linux
Kernel.
9d93b6d091 ("mvebu: drop redundant label with new LED color/function
format") removes "label" property from LEDs, then, multiple "<color>:"
(ex.: "green:"/"red:") will be appeared and renamed to "<color>:_<num>"
(ex.: "green:_1", "green:_2", ...) by kernel.
log:
[ 1.911118] leds-gpio leds: Led green: renamed to green:_1 due to name collision
[ 1.918600] leds-gpio leds: Led red: renamed to red:_1 due to name collision
[ 1.925727] leds-gpio leds: Led green: renamed to green:_2 due to name collision
[ 1.933202] leds-gpio leds: Led red: renamed to red:_2 due to name collision
[ 1.940321] leds-gpio leds: Led green: renamed to green:_3 due to name collision
[ 1.947797] leds-gpio leds: Led red: renamed to red:_3 due to name collision
[ 1.954939] leds-gpio leds: Led green: renamed to green:_4 due to name collision
[ 1.962456] leds-gpio leds: Led green: renamed to green:_5 due to name collision
/sys/class/leds:
root@OpenWrt:/# ls /sys/class/leds/
green: green:_3 green:status red:_2
green:_1 green:_4 red: red:_3
green:_2 green:_5 red:_1 red:status
Fix this issue by adding missing "function" (and "function-enumerator")
property to those LEDs on IIJ SA-W2.
Fixes: 9d93b6d091 ("mvebu: drop redundant label with new LED color/function format")
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
INAGAKI Hiroshi [Sat, 17 Feb 2024 10:27:42 +0000 (19:27 +0900)]
mvebu: fix LEDs on Fortinet FortiGate devices
On Fortinet FortiGate 30E/50E, some multiple LEDs have no "function"
property and only "color" property is available for the new binding of
LED on Linux Kernel.
9d93b6d091 ("mvebu: drop redundant label with new LED color/function
format") removes "label" property from LEDs, then, multiple "<color>:"
(ex.: "green:"/"red:"/"amber:") will be appeared as LED names and
renamed to "<color>:_<num>" (ex.: "green:_1", "green:_2", ...) by
kernel.
log:
[ 12.425170] leds-gpio gpio-leds: Led green: renamed to green:_1 due to name collision
[ 12.520390] leds-gpio gpio-leds: Led amber: renamed to amber:_1 due to name collision
[ 12.614931] leds-gpio gpio-leds: Led green: renamed to green:_2 due to name collision
[ 12.709895] leds-gpio gpio-leds: Led green: renamed to green:_3 due to name collision
[ 12.804439] leds-gpio gpio-leds: Led amber: renamed to amber:_2 due to name collision
[ 12.898969] leds-gpio gpio-leds: Led green: renamed to green:_4 due to name collision
[ 12.993504] leds-gpio gpio-leds: Led amber: renamed to amber:_3 due to name collision
[ 13.088033] leds-gpio gpio-leds: Led green: renamed to green:_5 due to name collision
[ 13.182570] leds-gpio gpio-leds: Led green: renamed to green:_6 due to name collision
[ 13.277103] leds-gpio gpio-leds: Led amber: renamed to amber:_4 due to name collision
[ 13.371636] leds-gpio gpio-leds: Led green: renamed to green:_7 due to name collision
/sys/class/leds:
root@OpenWrt:/# ls /sys/class/leds/
amber: amber:_4 green:_2 green:_6 red:alarm
amber:_1 amber:alarm green:_3 green:_7 red:status
amber:_2 green: green:_4 green:status
amber:_3 green:_1 green:_5 red:
Fix this issue by adding missing "function" (and "function-enumerator")
property those to LEDs on Fortinet FortiGate devices.
Note: there is no appropriate function for "ha" LEDs in
dt-bindings/leds/common.h, so use the hardcoded string for them instead.
Fixes: 9d93b6d091 ("mvebu: drop redundant label with new LED color/function format")
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
INAGAKI Hiroshi [Wed, 20 Mar 2024 11:14:36 +0000 (20:14 +0900)]
kernel: add pending patches for new LED_FUNCTION_* definitions
Add pending patches to add LED_FUNCTION_MOBILE and LED_FUNCTION_SPEED_*
definitions for Fortinet FortiGate devices and IIJ SA-W2.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Felix Golatofski [Tue, 9 Jan 2024 23:44:35 +0000 (00:44 +0100)]
ath79: add support for Comfast CF-EW71 v2
Specifications:
Qualcomm/Atheros QCA9531
2x 10/100 Mbps Ethernet, with 48v PoE
2T2R 2.4 GHz, 802.11b/g/n
128MB RAM
16MB SPI Flash
4x LED (Always On Power, LAN, WAN, WLAN)
Flashing instructions:
The original firmware is based on OpenWrt, so flashing the sysupgrade image over the factory firmware is sufficient.
The bootloader has a built-in recovery web-ui. This is the method I used to flash OpenWrt. You can get to the recovery web-ui by holding down the reset button for a few seconds (~5s) while pluggin in the router. The LEDs should start blinking fast and the router should be available on 192.168.1.1 for the recovery.
Tested: Reset button, WAN LED, LAN LED, Power LED (always on, not much to test), WLAN LED, MAC addresses (same as factory firmware).
Signed-off-by: Felix Golatofski <git@xdfr.de>
Tianling Shen [Wed, 10 Apr 2024 06:39:43 +0000 (14:39 +0800)]
uboot-rockchip: Update to 2024.04
Removed upstreamed patch.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Wed, 10 Apr 2024 06:35:38 +0000 (14:35 +0800)]
rkbin: bump to latest git HEAD
Fixed bugs for memory initialization/training,
improved memory compatibility/stability.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Hauke Mehrtens [Sat, 13 Apr 2024 15:48:42 +0000 (17:48 +0200)]
kernel: bump 6.1 to 6.1.86
Removed upstreamed:
bcm27xx/patches-6.1/950-1235-drm-vc4-don-t-check-if-plane-state-fb-state-fb.patch [1]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.86&id=
48bfb4b03c5ff6e1fa1dc73fb915e150b0968c40
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 13 Apr 2024 11:49:12 +0000 (13:49 +0200)]
kernel: bump 6.1 to 6.1.84
Removed upstreamed:
pistachio/patches-6.1/110-pwm-img-fix-clock-lookup.patch [1]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.84&id=
44b6fb6cdedb2c391a2da355521d4610b2645fcc
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Fri, 29 Mar 2024 22:15:26 +0000 (23:15 +0100)]
kernel: bump 6.1 to 6.1.83
Removed upstreamed:
generic/backport-6.1/789-STABLE-01-net-dsa-mt7530-prevent-possible-incorrect-XTAL-frequ.patch [1]
generic/backport-6.1/789-STABLE-02-net-dsa-mt7530-fix-link-local-frames-that-ingress-vl.patch [2]
generic/backport-6.1/789-STABLE-03-net-dsa-mt7530-fix-handling-of-all-link-local-frames.patch [3]
generic/pending-6.1/735-net-mediatek-mtk_eth_soc-release-MAC_MCR_FORCE_LINK-.patch [4]
generic/pending-6.1/736-net-ethernet-mtk_eth_soc-fix-PPE-hanging-issue.patch [5]
Manual adjusted the following patches:
mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=
be4512b9ac6fc53e1ca8daccbda84f643215c547
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=
f1fa919ea59655f73cb3972264e157b8831ba546
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=
86c0c154a759f2af9612a04bdf29110f02dce956
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=
6b62bad2da1b338f452a9380639fc9b093d75a25
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=
f78807362828ad01db2a9ed005bf79501b620f27
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 13 Apr 2024 16:25:16 +0000 (18:25 +0200)]
kernel: Reorder generic kernel 6.1 config
This reordering was done using these commands:
./scripts/kconfig.pl '+' target/linux/generic/config-6.1 /dev/null > target/linux/generic/config-6.1-new
mv target/linux/generic/config-6.1-new target/linux/generic/config-6.1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
John Audia [Sat, 13 Apr 2024 12:19:04 +0000 (08:19 -0400)]
kernel: bump 6.6 to 6.6.27
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.27
Removed upstreamed:
pending-6.6/981-gcc-plugins-stackleak-Avoid-.head.txt.section.patch[1]
All patches automatically rebased.
1. https://github.com/gregkh/linux/commit/
9dff96b8b3a404d3b3581af46450f2efeb7d290a
Build system: x86/64
Build-tested: flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, x86/64/AMD Cezanne
Run-tested: flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Wed, 10 Apr 2024 20:24:49 +0000 (16:24 -0400)]
x86: generic: config-6.6: refresh
Ran `make kernel_menuconfig`
Reference to CONFIG_SPECTRE_BHI_ON=y[1]
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/x86/Kconfig?id=v6.6.26&id2=v6.6.25
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Wed, 10 Apr 2024 19:16:18 +0000 (15:16 -0400)]
kernel: bump 6.6 to 6.6.26
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.26
Manually rebased:
generic/hack-6.6/210-darwin_scripts_include.patch
Added pending:
generic/pending-6.6/981-gcc-plugins-stackleak-Avoid-.head.txt.section.patch
All other patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, flogic/glinet_gl-mt6000
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, flogic/glinet_gl-mt6000
Signed-off-by: John Audia <therealgraysky@proton.me>
Hannu Nyman [Fri, 1 Mar 2024 20:51:25 +0000 (22:51 +0200)]
toolchain/musl: Update to 1.2.5
Update musl C library to 1.2.5
This release adds extension functions statx and preadv2/pwritev2,
with fallback implementations for older kernels, and adds two new
ports: loongarch64 and riscv32. Minor changes to the printf family
of functions have been made for conformance to new standards
interpretations/requirements. TLSDESC support for riscv64 has also
been added.
Bugs fixed include some DNS issues related to new TCP fallback
functionality, several rare race conditions, potentially incorrect
return value when glob aborts, and several signifiant arch-specific
bugs affecting TLSDESC on arm, riscv64 icache flushing, and
sh sigsetjmp and dlsym RTLD_NEXT.
1.2.5 release notes:
new features:
- statx function (linux extension; via syscall and fallback using fstatat)
- clone function is now usable and gives _Fork-like consistency in child
- statvfs now provides f_type result
- preadv2 and pwritev2 (linux extension) syscall wrappers
- riscv64 TLSDESC support
new ports:
- loongarch64
- riscv32
compatibility:
- DNS resolver can now handle answers with long CNAME chains
- string.h no longer provides (C23-incompat) non-prototype decl of basename
- fstatat statx backend now matches stat syscall non-automounting behavior
- mntent interfaces now handle escaped whitespace in paths/options
standards updates:
- printf %lc of nul wchar now produces output
- snprintf and swprintf no longer fail on n > INT_MAX
- ppoll is now exposed in default feature profile
bugs fixed:
- some long DNS answers were wrongly rejected despite new TCP support
- glob could wrongly return GLOB_NOMATCH if aborted before any matches
- multithreaded set*id could malfunction from thread sequencing logic bug
- certain use of threads after fork could deadlock thread-list lock
- posix_spawn child could deadlock in race with async parent death
- mbrtowc return value was wrong if argument n exceeded UINT_MAX
- 80-bit extended acoshl and powl got some corner cases wrong
- syslog incorrectly generated localized timestamps
arch-specific bugs fixed:
- arm (32-bit) TLSDESC malfunctioned due to addends being processed wrong
- riscv64 icache flush operation was non-functional
- sh sigsetjmp failed to properly restore call-saved register r8 on return
- sh dlsym RTLD_NEXT did not identify calling module correctly
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
[Removed patch adding basename hack again]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tony Ambardar [Tue, 5 Mar 2024 11:20:07 +0000 (03:20 -0800)]
elfutils: update to 1.91
Release Notes:
https://sourceware.org/pipermail/elfutils-devel/2024q1/006876.html
Refresh patch:
- 005-build_only_libs.patch
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Felix Fietkau [Fri, 12 Apr 2024 19:51:50 +0000 (21:51 +0200)]
netifd: rewrite packet steering script
The new script uses a different strategy compared to the previous one.
Instead of trying to split flows by hash and spread them to all CPUs,
use RPS to redirect packets to a single core only.
Try to spread NAPI thread and RPS target CPUs across available CPUs
and try to ensure that the NAPI thread is on a different CPU than the
RPS target. This significantly reduces cycles wasted on the scheduler.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rodrigo Balerdi [Sat, 13 Apr 2024 19:36:31 +0000 (16:36 -0300)]
ipq40xx: whw03v2: change LED color for 'running' state to blue
Change the RGB indicator LED color for the running state from green to
blue. There are various reasons for this change:
- In stock firmware, green means internet connection is up, red means it
is down, and blue means indeterminate. To track stock behavior as
closely as possible, OpenWrt should indicate blue by default.
- In the current 23.x OpenWrt releases for this router, the led glows
blue all the time -not green- because the bootloader sets it blue
and there is an OpenWrt bug that makes it unable to control the LED.
The bug is fixed in master, so without this commit there would be an
unexpected change of behavior for this device in the next release.
- The ports other closely related Linksys devices (such as EA8300 and
MR8300) get this right and use blue for the running state.
Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
Rodrigo Balerdi [Thu, 11 Apr 2024 18:44:10 +0000 (15:44 -0300)]
ipq40xx: whw03v2: fix handling of RGB LED
The RGB LED should glow green in the 'running' state, but it
was glowing cyan because the blue component defaulted to 'on'.
Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
Robert Marko [Thu, 11 Apr 2024 19:08:44 +0000 (21:08 +0200)]
mac80211: ath11k: support DT property to limit channels
Limiting allowed channels per device may be required and is commonly
supported on other drivers, so include a pending patch to add support for
the same.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Daniel Golle [Fri, 12 Apr 2024 12:24:38 +0000 (13:24 +0100)]
mediatek: fix DTS defining mt7530 switch phys but not referencing them
The upstream solution to define the MDIO bus in DT is a bit
more strict than our previous downstream solution doing the same thing
and now requires switch PHYs to be referenced in DT as well.
Arınç Ünal told us in #15141:
"With [the now upstream patch written by him which we backported], the
switch MDIO bus won't be assigned to ds->user_mii_bus when the switch
MDIO bus is defined on the device tree anymore. This was not the case
with the downstream patch.
When ds->user_mii_bus is populated, DSA will 1:1 map the port with
PHY. Meaning port with address 1 will be mapped to PHY with address 1.
Because that ds->user_mii_bus is not populated when the switch MDIO
bus is defined on the device tree, on every port node, the PHY address
must be supplied by the phy-handle property."
Add those phy-handles to affected devices' DT.
Fixes: 4354b34f6f ("generic: 6.6: sync mt7530 DSA driver with upstream")
Fixes: 401a6ccfaf ("generic: 6.1: sync mt7530 DSA driver with upstream")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>