drm/i915/display/icl: Enable TRANSCODER PORT SYNC for tiled displays across separate ports

In case of tiled displays where different tiles are displayed across
different ports, we need to synchronize the transcoders involved.
This patch implements the transcoder port sync feature for
synchronizing one master transcoder with one or more slave
transcoders. This is only enbaled in slave transcoder
and the master transcoder is unaware that it is operating
in this mode.
This has been tested with tiled display connected to ICL.

v7:
* Rebase on Maarten's patches
v6:
* Use master_trans +1 and address missing trans_edp case (Ville)
v5:
* Add TRANSCODER_D case and MISSING_CASE (Maarten)
v4:
Rebase
v3:
* Check of DP_MST moved to atomic_check (Maarten)
v2:
* Do not use RMW, just write to the register in commit (Jani N)

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-2-manasi.d.navare@intel.com

drm/i915/display/icl: Save Master transcoder in slave's crtc_state for Transcoder Port Sync

In case of tiled displays when the two tiles are sent across two CRTCs
over two separate DP SST connectors, we need a mechanism to synchronize
the two CRTCs and their corresponding transcoders.
So use the master-slave mode where there is one master corresponding
to last horizontal and vertical tile that needs to be genlocked with
all other slave tiles.
This patch identifies saves the master transcoder in all the slave
CRTC states. This is needed to select the master CRTC/transcoder
while configuring transcoder port sync for the corresponding slaves.

v6:
Rebase (manasi)
v5:
* Address Ville's comments
* Just pass crtc_state, no need to check GEN (Ville)
v4:
* Rebase
v3:
* Use master_tramscoder instead of master_crtc for valid
HW state readouts (Ville)
v2:
* Move this to intel_mode_set_pipe_config(Jani N, Ville)
* Use slave_bitmask to save associated slaves in master crtc state (Ville)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-1-manasi.d.navare@intel.com

drm/i915: Restore full symmetry in i915_driver_modeset_probe/remove

Commit 2d6f6f359fd8 ("drm/i915: add i915_driver_modeset_remove()")
claimed removal of asymmetry in probe() and remove() calls, however, it
didn't take care of calling intel_irq_uninstall() on driver remove.
That doesn't hurt as long as we still call it from
intel_modeset_driver_remove() but in order to have full symmetry we
should call it again from i915_driver_modeset_remove().

Note that it's safe to call intel_irq_uninstall() twice thanks to
commit b318b82455bd ("drm/i915: Nuke drm_driver irq vfuncs").  We may
only want to mention the case we are adding in a related FIXME comment
provided by that commit.  While being at it, update the name of
function mentioned as calling it out of sequence as that name has been
changed meanwhile by commit 78dae1ac35dd ("drm/i915: Propagate
"_remove" function name suffix down").

Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/6250061.7lZMOAyebC@jkrzyszt-desk.ger.corp.intel.com

drm/i915: Correct the PCH type in irq postinstall

JasperLake PCH (JSP) has DDI HPD pin mappings similar to TGP and not
MCC. Also add the correct HPD pin mappings for the MCC PCH.

Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016183514.11128-1-vivek.kasireddy@intel.com

drm/i915: Make hdcp2_msg_timeout.timeout u16

All the timeout values fit in u16, so let's shrink the structure
a bit.

This ends up actually increasing the .text size a bit due to
some changes in instructions (constant imul+small jmps replaced
with mov+bigger jmpqs). Seems pretty arbitrary to me so I'll
just pretend I didn't see it.

    text    data     bss     dec     hex filename
-  34521     360       0   34881    8841 intel_hdmi.o
+  34537     360       0   34897    8851 intel_hdmi.o

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010145127.7487-5-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>

drm/i915: Remove hdcp2_hdmi_msg_timeout.timeout2

The only reason for the timeout2 value in the array is the
HDCP_2_2_AKE_SEND_HPRIME message. But that one still needs
special casing inside the loop, and so just ends up making
the code harder to read. Let's just remove this leaky
timeout2 abstraction and special case that one command
in a way that is easy to understand. We can then remove the
timeout2 member from struct entirely.

    text    data     bss     dec     hex filename
-  34633     360       0   34993    88b1 intel_hdmi.o
+  34521     360       0   34881    8841 intel_hdmi.o

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010145127.7487-4-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>

drm/i915: Remove dead weight from hdcp2_msg_timeout[]

The .read_2_2() hooks is never called for any of the message
types with a zero timeout. So it's all just dead weight which
we can chuck.

    text    data     bss     dec     hex filename
-  34701     360       0   35061    88f5 intel_hdmi.o
+  34633     360       0   34993    88b1 intel_hdmi.o

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010145127.7487-3-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>

drm/i915: s/hdcp2_hdmi_msg_data/hdcp2_hdmi_msg_timeout/

The array is there only for timeout, "data" doesn't mean anything
so let's rename the thing to be more descriptive.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010145127.7487-2-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>

drm/i915: Shrink eDRAM ways/sets arrays

Make the ways/sets arrays static cosnt u8 to shrink things a bit.

    text    data     bss     dec     hex filename
-  23935     629     128   24692    6074 i915_drv.o
+  23818     629     128   24575    5fff i915_drv.o

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010145127.7487-1-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>

drm/i915: Make dirty_pipes refer to pipes

Despite the its name dirty_pipes refers to crtc indexes. Let's
change its behaviout to match the name.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011200949.7839-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Nuke 'realloc_pipes'

The 'realloc_pipes' bitmask is pointless. It is either:
a) the set of pipes which are already part of the state,
   in which case adding them again is entirely redundant
b) the set of all pipes which we then add to the state

Also the fact that 'realloc_pipes' uses the crtc indexes is
going to bite is at some point so best get rid of it quick.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011200949.7839-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Nuke the useless changed param from skl_ddb_add_affected_pipes()

changed==true just means we have some crtcs in the state. All the
stuff following this only operates on crtcs in the state anyway so
there is no point in having this bool.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011200949.7839-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Refuse modes with hdisplay==4096 on pre-HSW DP

The DP port/pipe goes wonky if we try to use timings with
hdisplay==4096 on pre-HSW platforms. The link fails to train
and the pipe may not signal vblank interrupts. On HDMI such at
mode works just fine (tested on ELK/SNB/CHV). So let's refuse
such modes on DP on older platforms.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718144340.1114-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Polish possible_clones setup

Replace the hand rolled stuff with drm_encoder_mask() when populating
possible_clones, and rename the function to
intel_encoder_possible_clones() to make it clear what it's used for.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-1-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

drm/i915: Move the cursor rotation handling into intel_cursor_check_surface()

Unlike other planes the cursor currently handles 180 degree rotation
adjustment during the hardware programming phase. Let's move that
stuff into intel_cursor_check_surface() to match how we do things
with other plane types.

And while at we'll plop in the final src x/y coordinates (which will
actually always be zero) into the src rect and color_plane[0].x/y,
just for some extra consistency.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015152757.12231-1-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

drm/i915/gt: Convert the leftover for_each_engine(gt)

Use the local gt for iterating over the available set of engines.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018115331.8980-1-chris@chris-wilson.co.uk

drm/i915/selftests: Add the mock engine to the gt->engine[]

Remember to include the newly created mock engine in the list of
available engines inside the gt.

Fixes: a50134b1983b ("drm/i915: Make for_each_engine_masked work on intel_gt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018130703.31125-1-chris@chris-wilson.co.uk

drm/i915: treat stolen as a region

Convert stolen memory over to a region object. Still leaves open the
question with what to do with pre-allocated objects...

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018090751.28295-3-matthew.auld@intel.com

drm/i915: treat shmem as a region

Convert shmem to an intel_memory_region.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018090751.28295-2-matthew.auld@intel.com

drm/i915: enumerate and init each supported region

Nothing to enumerate yet...

Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018090751.28295-1-matthew.auld@intel.com

drm/i915/execlists: Don't merely skip submission if maybe timeslicing

Normally, we try and skip submission if ELSP[1] is filled. However, we
may desire to enable timeslicing due to the queue priority, even if
ELSP[1] itself does not require timeslicing. That is the queue is equal
priority to ELSP[0] and higher priority then ELSP[1]. Previously, we
would wait until the context switch to preempt the current ELSP[1], but
with timeslicing, we want to preempt ELSP[0] and replace it with the
queue.

In writing the test case, it become quickly apparent that we were also
suppressing the tasklet during promotion and so failing to notice when
the queue started requiring timeslicing.

Fixes: 2229adc81380 ("drm/i915/execlist: Trim immediate timeslice expiry")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018072027.31948-1-chris@chris-wilson.co.uk

drm/i915/pmu: Fix uninitialized variable on error path

If name allocation failed the log message will contain an uninitialized
error code which can be confusing.

Fixes: 05488673a4d4 ("drm/i915/pmu: Support multiple GPUs")
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018090514.1818-1-tvrtko.ursulin@linux.intel.com
[tursulin: Commit message spelling fix.]

drm/i915: Pass in intel_gt at some for_each_engine sites

Where the function, or code segment, operates on intel_gt, we need to
start passing it instead of i915 to for_each_engine(_masked).

This is another partial step in migration of i915->engines[] to
gt->engines[].

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017094500.21831-2-tvrtko.ursulin@linux.intel.com

drm/i915: Make for_each_engine_masked work on intel_gt

Medium term goal is to eliminate the i915->engine[] array and to get there
we have recently introduced equivalent array in intel_gt. Now we need to
migrate the code further towards this state.

This next step is to eliminate usage of i915->engines[] from the
for_each_engine_masked iterator.

For this to work we also need to use engine->id as index when populating
the gt->engine[] array and adjust the default engine set indexing to use
engine->legacy_idx instead of assuming gt->engines[] indexing.

v2:
  * Populate gt->engine[] earlier.
  * Check that we don't duplicate engine->legacy_idx

v3:
  * Work around the initialization order issue between default_engines()
    and intel_engines_driver_register() which sets engine->legacy_idx for
    now. It will be fixed properly later.

v4:
  * Merge with forgotten v2.5.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017161852.8836-1-tvrtko.ursulin@linux.intel.com

drm/i915: Don't disable interrupts independently of the lock

The locks (active.lock and rq->lock) need to be taken with disabled
interrupts. This is done in i915_request_retire() by disabling the
interrupts independently of the locks itself.
While local_irq_disable()+spin_lock() equals spin_lock_irq() on vanilla
it does not on PREEMPT_RT.
Chris Wilson confirmed that local_irq_disable() was just introduced as
an optimisation to avoid enabling/disabling interrupts during
lock/unlock combo.

Enable/disable interrupts as part of the locking instruction.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017161352.e5z3ugse7gxl5ari@linutronix.de

drm/i915/selftests: Teach requests to use all available engines

The request selftests straddle the boundary between checking the driver
and the hardware. They are subject to the quirks of the underlying HW,
but operate on top of the backend abstractions. The tests focus on the
scheduler elements and so should check for interactions of the scheduler
across all exposed engines.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016125236.17960-1-chris@chris-wilson.co.uk

drm/i915/huc: improve documentation

Better explain the usage of the microcontroller and what i915 is
responsible of. While at it, fix the documentation for the auth
function, which doesn't do any pinning anymore.

v2: add a comment on HuC being optional and descrive how HuC accesses
    memory (Martin)
v3: add extra newline for better text organization (Martin)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Acked-by: Anna Karas <anna.karas@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014183602.3643-3-daniele.ceraolospurio@intel.com

drm/i915/guc: improve documentation

Add a short description of what we expect from GuC and some minor
improvements to existing documentation. Also remove a comment about a
difference between GuC and HuC that is not true anymore.

v2: add that the GuC is not mandatory (Martin)
v3: add extra newline for better text organization (Martin)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Acked-by: Anna Karas <anna.karas@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014183602.3643-2-daniele.ceraolospurio@intel.com

drm/i915: Add microcontrollers documentation section

To better organize the information, add a microcontrollers section and
move/link the GuC, HuC and DMC documentation under it. Also add a small
intro.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Anna Karas <anna.karas@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014183602.3643-1-daniele.ceraolospurio@intel.com

drm/i915: Fix MST oops due to MSA changes

The MSA MISC computation now depends on the connector state, and
we do it from the DDI .pre_enable() hook. All that is fine for
DP SST but with MST we don't actually pass the connector state
to the dig port's .pre_enable() hook which leads to an oops.

Need to think more how to solve this in a cleaner fashion, but
for now let's just add a NULL check to stop the oopsing.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Fixes: 0c06fa156006 ("drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSA")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015190538.27539-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915/pmu: Support multiple GPUs

With discrete graphics system can have both integrated and discrete GPU
handled by i915.

Currently we use a fixed name ("i915") when registering as the uncore PMU
provider which stops working in this case.

To fix this we add the PCI device name string to non-integrated devices
handled by us. Integrated devices keep the legacy name preserving
backward compatibility.

v2:
 * Detect IGP and keep legacy name. (Michal)
 * Use PCI device name as suffix. (Michal, Chris)

v3:
 * Constify the name. (Chris)
 * Use pci_domain_nr. (Chris)

v4:
 * Fix kfree_const usage. (Chris)

v5:
 * kfree_const does not work for modules. (Chris)
 * Changed is_igp helper to take i915.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016093802.12483-1-tvrtko.ursulin@linux.intel.com

drm/i915/tgl: Enable DDI/Port G

In TGL there we are missing the initialization of port G.
Do the same as for other ports.

Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008220905.18278-1-khaled.almahallawy@intel.com

drm/i915: Move swizzle_bit under i915_ggtt

The HW performs swizzling as part of its fence tiling inside the Global
GTT. We already do the probing of the HW settings from the GGTT setup,
complete the picture by storing the information as part of the GGTT. The
primary benefit is the consistency of our probe routines do not break
the i915_ggtt encapsulation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016143234.4075-2-chris@chris-wilson.co.uk

drm/i915: Store i915_ggtt as the backpointer on fence registers

Now that i915_ggtt knows everything about its own paths to perform mmio,
we can use that as our primary backpointer for individual fence
registers. This reduces the amount of pointer dancing we have to perform
on the common paths, but more importantly finishes our fence register
encapsulation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016143234.4075-1-chris@chris-wilson.co.uk

drm/i915: Do initial mocs configuration directly

Now that we record the default "goldenstate" context, we do not need to
emit the mocs registers at the start of each context and can simply do
mmio before the first context and capture the registers as part of its
default image. As a consequence, this means that we repeat the mmio
after each engine reset, fixing up any platform and registers that were
zapped by the reset (for those platforms with global not context-saved
settings).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111723
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111645
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Reviewed-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016090749.7092-1-chris@chris-wilson.co.uk

drm/i915/selftests: Teach timelines to take intel_gt as its argument

The timelines selftests are [mostly] hardware centric and so want to use
the gt as its target.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016113840.1106-1-chris@chris-wilson.co.uk

drm/i915/selftests: Teach workarounds to take intel_gt as its argument

The workarounds selftests are hardware centric and so want to use the gt
as its target.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016114902.24388-1-chris@chris-wilson.co.uk

drm/i915/selftests: Teach guc to take intel_gt as its argument

The guc selftests are hardware^W firmare centric and so want to use the
gt as its target.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016115311.12894-1-chris@chris-wilson.co.uk

drm/i915/selftests: Teach execlists to take intel_gt as its argument

The execlists selftests are hardware centric and so want to use the gt
as its target.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016120249.22714-1-chris@chris-wilson.co.uk

drm/i915: Introduce Jasper Lake PCH

The Jasper Lake PCH follows ICP/TGP's south display behavior and is
identical to MCC graphics-wise except that it does not use the unusual
(port C -> TC1) pin mapping that MCC does.

Also, it turns out the extra PCH ID that we had previously thought was a
form of MCC is actually a second ID for JSP (i.e., port C uses the port
C pins instead of the TC1 pins).

v2:
 - Also update the port masks (not just the pin table) in
   mcc_hpd_irq_setup.  (Vivek)

v3:
 - Break jsp_hpd_irq_setup out into its own function for clarity.
   (Vivek)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015162854.30546-1-matthew.d.roper@intel.com

drm/i915/ehl: Don't forget to set TC long detect function

Since EHL's MCC PCH reuses one of the TC pins we need to supply a TC
long detect function when handling the interrupts.

Fixes: 53448aed7b80 ("drm/i915/ehl: Port C's hotplug interrupt is associated with TC1 bits")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015161131.21239-1-matthew.d.roper@intel.com
Reviewed-by: Vivek Kasireddy <vivek.kasireddy@intel.com>

drm/i915: Prepare the mode readout for hw vs. uapi state split

Prepare the mode readout for the uapi vs. hw state split.
We'll want to do all readout into the hw state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927131432.15978-4-ville.syrjala@linux.intel.com

drm/i915: Prepare the connector/encoder mask readout for hw vs. uapi state split

Prepare the connector/encoder mask readout for the uapi vs. hw
state split. We'll want to do all readout into the hw state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927131432.15978-2-ville.syrjala@linux.intel.com

drm/i915: Switch intel_legacy_cursor_update() to intel_ types

Prefer the intel_ types in intel_legacy_cursor_update() over the
drm_ types. Should make it easier to adapt this to the uapi vs. hw
state split.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927131432.15978-1-ville.syrjala@linux.intel.com

drm/i915: Refactor timestamping constants update

Once we do the hw vs. uapi split we can no longer use
drm_atomic_helper_calc_timestamping_constants() as it'll
consult the uapi state instead of the hw state.

So let's just update the vblank timestamping constants whenever
we update the scanline offset. We use both to convert the hw
scanline count to something which matches the software timing
values.

First I thought to put these into intel_crtc_vblank_on() but
we may want to get the scanline counter value before that (eg.
from some early tracepoints), so let's stick to updating them
a bit earlier than intel_crtc_vblank_on().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007114943.29307-3-ville.syrjala@linux.intel.com

drm/i915/execlist: Trim immediate timeslice expiry

We perform timeslicing immediately upon receipt of a request that may be
put into the second ELSP slot. The idea behind this was that since we
didn't install the timer if the second ELSP slot was empty, we would not
have any idea of how long ELSP[0] had been running and so giving the
newcomer a chance on the GPU was fair. However, this causes us extra
busy work that we may be able to avoid if we wait a jiffie for the first
timeslice as normal.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016100851.4979-1-chris@chris-wilson.co.uk

drm/i915/selftests: Drop stale struct_mutex

A lately added test was missed when applying the struct_mutex removal
patches. Do so now.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015085911.10317-1-chris@chris-wilson.co.uk

drm/i915/tgl: Wa_1607138340

Avoid possible cs hang with semaphores by disabling
lite restore.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-11-mika.kuoppala@linux.intel.com

drm/i915/tgl: Wa_1607030317, Wa_1607186500, Wa_1607297627

Disable semaphore idle messages and wait for event
power downs.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-10-mika.kuoppala@linux.intel.com

drm/i915/tgl: Wa_1607138336

Avoid possible deadlock on context switch.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-9-mika.kuoppala@linux.intel.com

drm/i915/tgl: Wa_1409600907

To avoid possible hang, we need to add depth stall if we flush the
depth cache.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-8-mika.kuoppala@linux.intel.com

drm/i915/tgl: Wa_1409170338

Avoid possible hang in tsg,vfe units by keeping
l3 clocks runnings.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-7-mika.kuoppala@linux.intel.com

drm/i915/tgl: Wa_1409420604

Avoid possible hang in CPSS unit.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-6-mika.kuoppala@linux.intel.com

drm/i915/tgl: Keep FF dop clock enabled for A0

To ensure correct state data for compute workloads, we
need to keep the ff dop clock enabled.

References: HSDES#1606700617
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-5-mika.kuoppala@linux.intel.com

drm/i915/tgl: Add extra hdc flush workaround

In order to ensure constant caches are invalidated
properly with a0, we need extra hdc flush after invalidation.

v2: use IS_TGL_REVID (Chris)

References: HSDES#1604544889
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-4-mika.kuoppala@linux.intel.com

drm/i915/tgl: Add HDC Pipeline Flush

Add hdc pipeline flush to ensure memory state is coherent
in L3 when we are done.

v2: Flush also in breadcrumbs (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-3-mika.kuoppala@linux.intel.com

drm/i915/tgl: Include ro parts of l3 to invalidate

Aim for completeness and invalidate also the ro parts
in l3 cache. This might allow to get rid of the preparser
disable/enable workaround on invalidation path.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-2-mika.kuoppala@linux.intel.com

drm/i915/tgl: Add IS_TGL_REVID

We are going to need this macro on limiting
the workaround scope.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-1-mika.kuoppala@linux.intel.com

drm/i915/icl: Wa_1607087056

Avoid possible hang in tsg,vfe units by keeping
l3 clocks runnings.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154411.9984-1-mika.kuoppala@linux.intel.com

drm/i915: Flush tasklet submission before sleeping on i915_request_wait

If the system is being slow and userspace is racing ahead of the GPU and
finds itself waiting for the GPU to catch up, before the process sleeps
give the tasklet a kick, bypassing ksoftirqd. If the system is
overloaded, then ksoftirqd may be delayed incurring additional latency
to our user.

This should not be a frequent problem, but in the past we have observed
several hundred millisecond delays before ksoftirqd services an
interrupt, so burn a few cycles to lend a helping hand.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015132606.14349-1-chris@chris-wilson.co.uk

drm/i915: Use drm_rect_init()

Use the new drm_rect_init() helper where appropriate.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930134214.24702-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Use drm_rect_translate_to()

Use the newly introduced drm_rect_translate_to() instead
of hand rolling it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930134214.24702-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Make .modeset_calc_cdclk() mandatory

While not all platforms allow us to change the cdclk frequency
we should still verify that the fixed cdclk frequency isn't
too low. To that end let's cook up a .modeset_calc_cdclk()
implementation that only does the min_cdclk vs. actual cdclk
frequency check for such platforms.

Also we mustn't forget about double wide pipe on gen2/3 when
doing this.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708125325.16576-11-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Stop using drm_atomic_helper_check_planes()

We need to insert stuff between the plane and crtc .atomic_check()
drm_atomic_helper_check_planes() doesn't allow us to do that so
stop using it and hand roll the loops instead.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708125325.16576-9-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

drm/i915: Switch to using DP_MSA_MISC_* defines

Now that we have standard defines for the MSA MISC bits lets use
them on HSW+ where we program these directly into the TRANS_MSA_MISC
register.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-7-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915/dp: Attach HDR metadata property to DP connector

It attaches HDR metadata property to DP connector on GLK+.
It enables HDR metadata infoframe sdp on GLK+ to be used to send
HDR metadata to DP sink.

v2: Minor style fix

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-9-gwan-gyeong.mun@intel.com

drm/i915/dp: Program an Infoframe SDP Header and DB for HDR Static Metadata

Function intel_dp_setup_hdr_metadata_infoframe_sdp handles Infoframe SDP
header and data block setup for HDR Static Metadata. It enables writing of
HDR metadata infoframe SDP to panel. Support for HDR video was introduced
in DisplayPort 1.4. It implements the CTA-861-G standard for transport of
static HDR metadata. The HDR Metadata will be provided by userspace
compositors, based on blending policies and passed to the driver through
a blob property.

Because each of GEN11 and prior GEN11 have different register size for
HDR Metadata Infoframe SDP packet, it adds and uses different register
size.

Setup Infoframe SDP header and data block in function
intel_dp_setup_hdr_metadata_infoframe_sdp for HDR Static Metadata as per
dp 1.4 spec and CTA-861-F spec.
As per DP 1.4 spec, 2.2.2.5 SDP Formats. It enables Dynamic Range and
Mastering Infoframe for HDR content, which is defined in CTA-861-F spec.
According to DP 1.4 spec and CEA-861-F spec Table 5, in order to transmit
static HDR metadata, we have to use Non-audio INFOFRAME SDP v1.3.

+--------------------------------+-------------------------------+
|      [ Packet Type Value ]     |       [ Packet Type ]         |
+--------------------------------+-------------------------------+
| 80h + Non-audio INFOFRAME Type | CEA-861-F Non-audio INFOFRAME |
+--------------------------------+-------------------------------+
|      [Transmission Timing]                                     |
+----------------------------------------------------------------+
| As per CEA-861-F for INFOFRAME, including CEA-861.3 within     |
| which Dynamic Range and Mastering INFOFRAME are defined        |
+----------------------------------------------------------------+

v2: Add a missed blank line after function declaration.
v3: Remove not handled return values from
    intel_dp_setup_hdr_metadata_infoframe_sdp(). [Uma]
v9: Addressed review comments from Ville.
    - Add BUILD_BUG_ON to check a changing of struct dp_sdp size.
    - Change a passed size toward write_infoframe() for DP infoframe sdp
      packet for HDR static metadata.

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-8-gwan-gyeong.mun@intel.com

drm/i915: Add new GMP register size for GEN11

According to Bspec, GEN11 and prior GEN11 have different register size for
HDR Metadata Infoframe SDP packet. It adds new VIDEO_DIP_GMP_DATA_SIZE for
GEN11. And it makes handle different register size for
HDMI_PACKET_TYPE_GAMUT_METADATA on hsw_dip_data_size() for each GEN
platforms. It addresses Uma's review comments.

v9: Add WARN_ON() when buffer size if larger than register size. [Ville]

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-7-gwan-gyeong.mun@intel.com

drm/i915/dp: Attach colorspace property

It attaches the colorspace connector property to a DisplayPort connector.
Based on colorspace change, modeset will be triggered to switch to a new
colorspace.

And in order to distinguish colorspace bwtween DP and HDMI connector, it
adds a handling of drm_mode_create_dp_colorspace_property() to
intel_attach_colorspace_property().

Based on colorspace property value create a VSC SDP packet with appropriate
colorspace. This would help to enable wider color gamut like BT2020 on a
sink device.

v9: Addressed review comments from Ville
  - Add a handling of drm_mode_create_dp_colorspace_property() to
    intel_attach_colorspace_property(). This hunk moved from the previous
    commit.

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-6-gwan-gyeong.mun@intel.com

drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSA

When BT.2020 Colorimetry output is used for DP, we should program BT.2020
Colorimetry to MSA and VSC SDP. In order to handle colorspace of
drm_connector_state, it moves a calling of intel_ddi_set_pipe_settings()
function into intel_ddi_pre_enable_dp(). And it also rename
intel_ddi_set_pipe_settings() to intel_ddi_set_dp_msa().

As per DP 1.4a spec section 2.2.4 [MSA Data Transport]
The MSA data that the DP Source device transports for reproducing the main
video stream. Attribute data is sent once per frame during the main video
stream’s vertical blanking period.

In order to distinguish needed colorimetry for VSC SDP, it adds
intel_dp_needs_vsc_sdp function.
If the output colorspace requires vsc sdp or output format is YCbCr 4:2:0,
it uses MSA with VSC SDP.

As per DP 1.4a spec section 2.2.4.3 [MSA Field for Indication of
Color Encoding Format and Content Color Gamut] while sending
BT.2020 Colorimetry signals we should program MSA MISC1 fields which
indicate VSC SDP for the Pixel Encoding/Colorimetry Format.

v2: Remove useless parentheses
v3: Addressed review comments from Ville
    - In order to checking output format and output colorspace on
      intel_dp_needs_vsc_sdp(), it passes entire intel_crtc_state struct
      value.
    - Remove a pointless variable.
v9: Addressed review comments from Ville
    - Remove a duplicated output color space from intel_crtc_state.
    - In order to handle colorspace of drm_connector_state, it moves a
      calling of intel_ddi_set_pipe_settings() function into
      intel_ddi_pre_enable_dp().

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-3-gwan-gyeong.mun@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/dp: Extend program of VSC Header and DB for Colorimetry Format

It refactors and renames a function which handled vsc sdp header and data
block setup for supporting colorimetry format.
Function intel_dp_setup_vsc_sdp handles vsc sdp header and data block
setup for pixel encoding / colorimetry format.
In order to use colorspace information of a connector, it adds an argument
of drm_connector_state type.

Setup VSC header and data block in function intel_dp_setup_vsc_sdp for
pixel encoding / colorimetry format as per dp 1.4a spec, section 2.2.5.7.1,
table 2-119: VSC SDP Header Bytes, section 2.2.5.7.5,
table 2-120: VSC SDP Payload for DB16 through DB18.

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-2-gwan-gyeong.mun@intel.com

drm/i915/execlists: Clear semaphore immediately upon ELSP promotion

There is no significance to our delay before clearing the semaphore the
engine is waiting on, so release it as soon as we acknowledge the CS
update following our preemption request. This should allow the GPU to
resume work earlier, if it was stuck on the semaphore at the end of a
request.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015093204.25693-1-chris@chris-wilson.co.uk

drm/i915: Remove leftover vma->obj->pages_pin_count on insert/remove

We now do the page pin count upfront in vma_get_pages/vma_put_pages, so
that we do the allocations before we enter the vm->mutex. Our vma
page references we are tracked in vma->pages_count and the extra
obj->pages_pin_count being performed later in i915_vma_insert and
i915_vma_remove is redundant, and worse throws off the shrinker's logic
on when it can free an object by unbinding it.

Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reported-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015100155.10376-1-chris@chris-wilson.co.uk

drm/i915: Drop obj.page_pin_count after a failed vma->set_pages()

Before we attempt to set_pages on the vma, we claim a
obj.pages_pin_count for it. If we subsequently fail to set the pages on
the vma, we need to drop our pinning before returning the error.

Reported-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015093915.3995-1-chris@chris-wilson.co.uk

Merge drm/drm-next into drm-intel-next-queued

Backmerging to pull in HDR DP code:

https://lists.freedesktop.org/archives/dri-devel/2019-September/236453.html

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/perf: allow holding preemption on filtered ctx

We would like to make use of perf in Vulkan. The Vulkan API is much
lower level than OpenGL, with applications directly exposed to the
concept of command buffers (pretty much equivalent to our batch
buffers). In Vulkan, queries are always limited in scope to a command
buffer. In OpenGL, the lack of command buffer concept meant that
queries' duration could span multiple command buffers.

With that restriction gone in Vulkan, we would like to simplify
measuring performance just by measuring the deltas between the counter
snapshots written by 2 MI_RECORD_PERF_COUNT commands, rather than the
more complex scheme we currently have in the GL driver, using 2
MI_RECORD_PERF_COUNT commands and doing some post processing on the
stream of OA reports, coming from the global OA buffer, to remove any
unrelated deltas in between the 2 MI_RECORD_PERF_COUNT.

Disabling preemption only apply to a single context with which want to
query performance counters for and is considered a privileged
operation, by default protected by CAP_SYS_ADMIN. It is possible to
enable it for a normal user by disabling the paranoid stream setting.

v2: Store preemption setting in intel_context (Chris)

v3: Use priorities to avoid preemption rather than the HW mechanism

v4: Just modify the port priority reporting function

v5: Add nopreempt flag on gem context and always flag requests
    appropriately, regarless of OA reconfiguration.

Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-4-chris@chris-wilson.co.uk

drm/i915/perf: Allow dynamic reconfiguration of the OA stream

Introduce a new perf_ioctl command to change the OA configuration of the
active stream. This allows the OA stream to be reconfigured between
batch buffers, giving greater flexibility in sampling. We inject a
request into the OA context to reconfigure the stream asynchronously on
the GPU in between and ordered with execbuffer calls.

Original patch for dynamic reconfiguration by Lionel Landwerlin.

Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-3-chris@chris-wilson.co.uk

drm/i915: add support for perf configuration queries

Listing configurations at the moment is supported only through sysfs.
This might cause issues for applications wanting to list
configurations from a container where sysfs isn't available.

This change adds a way to query the number of configurations and their
content through the i915 query uAPI.

v2: Fix sparse warnings (Lionel)
    Add support to query configuration using uuid (Lionel)

v3: Fix some inconsistency in uapi header (Lionel)
    Fix unlocking when not locked issue (Lionel)
    Add debug messages (Lionel)

v4: Fix missing unlock (Dan)

v5: Drop lock when copying config content to userspace (Chris)

v6: Drop lock when copying config list to userspace (Chris)
    Fix deadlock when calling i915_perf_get_oa_config() under
    perf.metrics_lock (Lionel)
    Add i915_oa_config_get() (Chris)

Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-2-chris@chris-wilson.co.uk

drm/i915/perf: introduce a versioning of the i915-perf uapi

Reporting this version will help application figure out what level of
the support the running kernel provides.

v2: Add i915_perf_ioctl_version() (Chris)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-1-chris@chris-wilson.co.uk

drm/i915/execlists: Assert tasklet is locked for process_csb()

We rely on only the tasklet being allowed to call into process_csb(), so
assert that is locked when we do. As the tasklet uses a simple bitlock,
there is no strong lockdep checking so we must make do with a plain
assertion that the tasklet is running and assume that we are the
tasklet!

v2: Fixup intel_gt_sanitize() to prepare each engine for the reset so
that the locks are marked as held during the reset
v3: Check for existent function pointers for very early sanitisation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014121336.30137-1-chris@chris-wilson.co.uk

drm/i915/ehl: Port C's hotplug interrupt is associated with TC1 bits

On platforms that have the MCC PCH, Port C's hotplug interrupt
bits are mapped to TC1 bits.

Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011002618.3087-1-vivek.kasireddy@intel.com

drm/i915: Favor last VBT child device with conflicting AUX ch/DDC pin

The first come first served apporoach to handling the VBT
child device AUX ch conflicts has backfired. We have machines
in the wild where the VBT specifies both port A eDP and
port E DP (in that order) with port E being the real one.

So let's try to flip the preference around and let the last
child device win once again.

Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Tested-by: Masami Ichikawa <masami256@gmail.com>
Tested-by: Torsten <freedesktop201910@liggy.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111966
Fixes: 36a0f92020dc ("drm/i915/bios: make child device order the priority order")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011202030.8829-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/execlists: Tweak virtual unsubmission

Since commit e2144503bf3b ("drm/i915: Prevent bonded requests from
overtaking each other on preemption") we have restricted requests to run
on their chosen engine across preemption events. We can take this
restriction into account to know that we will want to resubmit those
requests onto the same physical engine, and so can shortcircuit the
virtual engine selection process and keep the request on the same
engine during unwind.

References: e2144503bf3b ("drm/i915: Prevent bonded requests from overtaking each other on preemption")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ramlingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191013203012.25208-1-chris@chris-wilson.co.uk

drm/i915/selftests: Check that GPR are cleared for new contexts

We want the general purpose registers to be clear in all new contexts so
that we can be confident that no information is leaked from one to the
next.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014090757.32111-7-chris@chris-wilson.co.uk

drm/i915/selftests: Check known register values within the context

Check the logical ring context by asserting that the registers hold
expected start during execution. (It's a bit chicken-and-egg for how
could we manage to execute our request if the registers were not being
updated. Still, it's nice to verify that the HW is working as expected.)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014090757.32111-6-chris@chris-wilson.co.uk

drm/i915/display: Squelch kerneldoc warnings

Just a parameter rename,

drivers/gpu/drm/i915/display/intel_display.c:14425: warning: Function parameter or member '_new_plane_state' not described in 'intel_prepare_plane_fb'
drivers/gpu/drm/i915/display/intel_display.c:14425: warning: Excess function parameter 'new_state' description in 'intel_prepare_plane_fb'
drivers/gpu/drm/i915/display/intel_display.c:14534: warning: Function parameter or member '_old_plane_state' not described in 'intel_cleanup_plane_fb'
drivers/gpu/drm/i915/display/intel_display.c:14534: warning: Excess function parameter 'old_state' description in 'intel_cleanup_plane_fb'

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191012080208.18774-1-chris@chris-wilson.co.uk

drm/i915/selftests: Fixup naked 64b divide

drivers/gpu/drm/i915/intel_memory_region.o: in function `igt_mock_contiguous':
drivers/gpu/drm/i915/selftests/intel_memory_region.c:166: undefined reference to `__umoddi3'

v2: promote target to u64 for consistency across all builds

Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 2f0b97ca0211 ("drm/i915/region: support contiguous allocations")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191013114509.3405-1-chris@chris-wilson.co.uk

drm/i915/perf: Avoid polluting the i915_oa_config with error pointers

Use a local variable to track the allocation errors to avoid polluting
the struct and keep the free simple.

Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191013095211.2922-1-chris@chris-wilson.co.uk

drm/i915/perf: Prefer using the pinned_ctx for emitting delays on config

When we are watching a particular context, we want the OA config to be
applied inline with that context such that it takes effect before the
next submission.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191012091056.28686-1-chris@chris-wilson.co.uk

drm/i915/perf: execute OA configuration from command stream

We haven't run into issues with programming the global OA/NOA
registers configuration from CPU so far, but HW engineers actually
recommend doing this from the command streamer. On TGL in particular
one of the clock domain in which some of that programming goes might
not be powered when we poke things from the CPU.

Since we have a command buffer prepared for the execbuffer side of
things, we can reuse that approach here too.

This also allows us to significantly reduce the amount of time we hold
the main lock.

v2: Drop the global lock as much as possible

v3: Take global lock to pin global

v4: Create i915 request in emit_oa_config() to avoid deadlocks (Lionel)

v5: Move locking to the stream (Lionel)

v6: Move active reconfiguration request into i915_perf_stream (Lionel)

v7: Pin VMA outside request creation (Chris)
    Lock VMA before move to active (Chris)

v8: Fix double free on stream->initial_oa_config_bo (Lionel)
    Don't allow interruption when waiting on active config request
    (Lionel)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191012072308.30312-3-chris@chris-wilson.co.uk

drm/i915/perf: implement active wait for noa configurations

NOA configuration take some amount of time to apply. That amount of
time depends on the size of the GT. There is no documented time for
this. For example, past experimentations with powergating
configuration changes seem to indicate a 60~70us delay. We go with
500us as default for now which should be over the required amount of
time (according to HW architects).

v2: Don't forget to save/restore registers used for the wait (Chris)

v3: Name used CS_GPR registers (Chris)
    Fix compile issue due to rebase (Lionel)

v4: Fix save/restore helpers (Umesh)

v5: Move noa_wait from drm_i915_private to i915_perf_stream (Lionel)

v6: Add missing struct declarations in i915_perf.h

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191012072308.30312-2-chris@chris-wilson.co.uk

drm/i915/perf: allow for CS OA configs to be created lazily

Here we introduce a mechanism by which the execbuf part of the i915
driver will be able to request that a batch buffer containing the
programming for a particular OA config be created.

We'll execute these OA configuration buffers right before executing a
set of userspace commands so that a particular user batchbuffer be
executed with a given OA configuration.

This mechanism essentially allows the userspace driver to go through
several OA configuration without having to open/close the i915/perf
stream.

v2: No need for locking on object OA config object creation (Chris)
    Flush cpu mapping of OA config (Chris)

v3: Properly deal with the perf_metric lock (Chris/Lionel)

v4: Fix oa config unref/put when not found (Lionel)

v5: Allocate BOs for configurations on the stream instead of globally
    (Lionel)

v6: Fix 64bit division (Chris)

v7: Store allocated config BOs into the stream (Lionel)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191012072308.30312-1-chris@chris-wilson.co.uk

drm/i915: Mark up "sentinel" requests

Sometimes we want to emit a terminator request, a request that flushes
the pipeline and allows no request to come after it. This can be used
for a "preempt-to-idle" to ensure that upon processing the
context-switch to that request, all other active contexts have been
flushed.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191012070136.32058-1-chris@chris-wilson.co.uk

drm/i915/execlists: Prevent merging requests with conflicting flags

We set out-of-bound parameters inside the i915_requests.flags field,
such as disabling preemption or marking the end-of-context. We should
not coalesce consecutive requests if they have differing instructions
as we only inspect the last active request in a context. Thus if we
allow a later request to be merged into the same execution context, it
will mask any of the earlier flags.

References: 2a98f4e65bba ("drm/i915: add infrastructure to hold off preemption on a request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011190325.10979-9-chris@chris-wilson.co.uk

drm/i915/perf: Replace global wakeref tracking with engine-pm

As we now have a specific engine to use OA on, exchange the top-level
runtime-pm wakeref with the engine-pm. This still results in the same
top-level runtime-pm, but with more nuances to keep the engine and its
gt awake.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011190325.10979-1-chris@chris-wilson.co.uk

drm/i915/selftests: Serialise write to scratch with its vma binding

Add the missing serialisation on the request for a write into a vma to
wait until that vma is bound before being executed by the GPU.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011193620.14026-1-chris@chris-wilson.co.uk

drm/i915: Add an rcu_barrier option to i915_drop_caches

Sometimes a test has to wait for RCU to complete a grace period and
perform its callbacks, for example waiting for a close(fd) to actually
perform the fput(filp) and so trigger all the callbacks such as closing
GEM contexts. There is no trivial means of triggering an RCU barrier
from userspace, so add one for our convenience in
debugfs/i915_drop_caches

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011173823.20432-1-chris@chris-wilson.co.uk

drm/i915/execlists: Only mark incomplete requests as -EIO on cancelling

Only the requests that have not completed do we want to change the
status of to signal the -EIO when cancelling the inflight set of requests
upon wedging.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011103345.26013-1-chris@chris-wilson.co.uk

drm/i915/execlists: Leave tell-tales as to why pending[] is bad

Before we BUG out with bad pending state, leave a telltale as to which
test failed.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010071434.31195-2-chris@chris-wilson.co.uk

drm/i915: Note the addition of timeslicing to the pretend scheduler

Since writing the comment that the scheduler is entirely passive, we've
added minimal timeslicing which adds the most primitive of active
elements (a timeout and reschedule).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010071434.31195-1-chris@chris-wilson.co.uk