Michael Chan [Mon, 19 Jul 2010 14:15:02 +0000 (14:15 +0000)]
bnx2: Use proper counter for net_device_stats->multicast.
We were using the wrong tx multicast counter instead of the rx multicast
counter.
Reported-by: Peter Snellman <peter.snellman@cinnober.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don Skidmore [Mon, 19 Jul 2010 14:00:47 +0000 (14:00 +0000)]
ixgbe: fix version string for ixgbe
Bump the version string to better reflect what is in the driver.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yi Zou [Mon, 19 Jul 2010 14:00:24 +0000 (14:00 +0000)]
ixgbe: use GFP_ATOMIC when allocating FCoE DDP context from the dma pool
The FCoE protocol stack may hold a lock when this gets called.
Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yi Zou [Mon, 19 Jul 2010 13:59:52 +0000 (13:59 +0000)]
ixgbe: properly toggling netdev feature flags when disabling FCoE
When FCoE is disabled, there is a race condition that FCoE offload is
turned off but the FCoE protocol driver is still queuing I/O thinking
offload support still exists. This patch toggles off corresponding FCoE
netdev feature flags and notify the FCoE stack first, allowing FCoE
protocol stack driver to update its flags upon NETDEV_FEAT_CHANGE so no
I/O will be using offload.
Also, indicate FCoE offload flags in vlan_features in ixgbe_probe once
and do not toggle them in ixgbe_fcoe_enable/disable so when FCoE is
created on the VLAN interface, vlan_transfer_features() would properly
update the VLAN netdev features flag and notify the FCoE protocol driver
for NETDEV_FEAT_CHANGE.
Signed-off-by: Yi Zou <yi.zou@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Mon, 19 Jul 2010 13:59:27 +0000 (13:59 +0000)]
ixgbe: drop support for UDP in RSS hash generation
This change removes UDP from the supported protocols for RSS hashing. The
reason for removing this protocol is because IP fragmentation was causing a
network flow to be broken into two streams, one for fragmented, and one for
non-fragmented and this in turn was causing out-of-order issues.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Mon, 19 Jul 2010 13:59:03 +0000 (13:59 +0000)]
ixgbe: dcb, set DPF bit when PFC is enabled
Set the DPF bit when PFC is enabled. This will discard
PFC frames so they do not get passed up the stack.
The DPF bit is set for flow control, but not priority
flow control this brings pfc inline with fc.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Mon, 19 Jul 2010 13:43:47 +0000 (13:43 +0000)]
e1000: allow option to limit number of descriptors down to 48 per ring
This change makes it possible to limit the number of descriptors down to 48
per ring. The reason for this change is to address a variation on hardware
errata 10 for 82546GB in which descriptors will be lost if more than 32
descriptors are fetched and the PCI-X MRBC is 512.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Morton [Mon, 19 Jul 2010 22:27:13 +0000 (15:27 -0700)]
drivers/net/82596.c: fix warning
drivers/net/82596.c: In function 'i596_open':
drivers/net/82596.c:1044: warning: label 'err_irq_dev' defined but not used
Caused by "82596: free resources on error"
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 19 Jul 2010 22:25:04 +0000 (15:25 -0700)]
ks8842: Fix ks8842_tx_frame() for 16bit case.
As reported by Andrew:
drivers/net/ks8842.c: In function 'ks8842_handle_rx':
drivers/net/ks8842.c:428: warning: 'status' may be used uninitialized in this function
Just use the 32-bit status for all reads, and delete the useless
cast to 'int' when reading a u16 into 'len'.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 19 Jul 2010 10:48:49 +0000 (10:48 +0000)]
net: this_cpu_xxx conversions
Use modern this_cpu_xxx() api, saving few bytes on x86
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Catalin Marinas [Mon, 19 Jul 2010 20:36:21 +0000 (13:36 -0700)]
smsc911x: Add spinlocks around registers access
On SMP systems, the SMSC911x registers may be accessed by multiple CPUs
and this seems to put the chip in an inconsistent state. The patch adds
spinlocks to the smsc911x_reg_read, smsc911x_reg_write,
smsc911x_rx_readfifo and smsc911x_tx_writefifo functions.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 19 Jul 2010 06:52:36 +0000 (06:52 +0000)]
bonding: avoid a warning
drivers/net/bonding/bond_main.c:179:12: warning: ‘disable_netpoll’
defined but not used
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Egger [Mon, 19 Jul 2010 04:37:11 +0000 (04:37 +0000)]
net: Removing dead ARCH_PNX010X
ARCH_PNX010X doesn't exist in Kconfig, therefore removing all
references for it from the source code/Kconfig.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shreyas Bhatewara [Thu, 15 Jul 2010 15:21:27 +0000 (15:21 +0000)]
net-next: vmxnet3 fixes [5/5] Respect the interrupt type in VM configuration
Respect the interrupt type set in VM configuration.
When interrupt type is not auto, do not ignore the interrupt type set from
VM configuration.
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shreyas Bhatewara [Mon, 19 Jul 2010 07:02:13 +0000 (07:02 +0000)]
net-next: vmxnet3 fixes [4/5] Do not reset when the device is not opened
Hold rtnl_lock to get the right link state.
While asynchronously resetting the device, hold rtnl_lock to get the
right value from netif_running. If a reset is scheduled, and the device
goes thru close and open, it may happen that reset and open may run in
parallel. Holding rtnl_lock will avoid this.
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 19 Jul 2010 16:35:40 +0000 (09:35 -0700)]
net: 64bit stats for netdev_queue
Since struct netdev_queue tx_bytes/tx_packets/tx_dropped are already
protected by _xmit_lock, its easy to convert these fields to u64 instead
of unsigned long.
This completes 64bit stats for devices using them (vlan, macvlan, ...)
Strictly, we could avoid the locking in dev_txq_stats_fold() on 64bit
arches, but its slow path and we prefer keep it simple.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 19 Jul 2010 03:24:14 +0000 (03:24 +0000)]
bonding: fix bond_inet6addr_event()
After commit
ad1afb0039391 (vlan_dev: VLAN 0 should be treated
as "no vlan tag" (802.1p packet)),
bond_inet6addr_event() might be called with a NULL bond->vlgrp pointer, and
a non empty bond->vlan_list. vlan_group_get_device() is dereferencing a NULL pointer.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Sun, 18 Jul 2010 22:55:58 +0000 (22:55 +0000)]
s2io: Remove unnecessary memset of netdev private data
The memory for the private data is allocated using kzalloc in
alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to
set it to 0 again.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 19 Jul 2010 02:52:55 +0000 (19:52 -0700)]
sch_atm: Convert to use standard list_head facilities.
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sat, 17 Jul 2010 08:49:36 +0000 (08:49 +0000)]
net: support time stamping in phy devices.
This patch adds a new networking option to allow hardware time stamps
from PHY devices. When enabled, likely candidates among incoming and
outgoing network packets are offered to the PHY driver for possible
time stamping. When accepted by the PHY driver, incoming packets are
deferred for later delivery by the driver.
The patch also adds phylib driver methods for the SIOCSHWTSTAMP ioctl
and callbacks for transmit and receive time stamping. Drivers may
optionally implement these functions.
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sat, 17 Jul 2010 08:49:17 +0000 (08:49 +0000)]
net: added a BPF to help drivers detect PTP packets.
Certain kinds of hardware time stamping units in both MACs and PHYs have
the limitation that they can only time stamp PTP packets. Drivers for such
hardware are left with the task of correctly matching skbs to time stamps.
This patch adds a BPF that drivers can use to classify PTP packets when
needed.
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sat, 17 Jul 2010 08:48:55 +0000 (08:48 +0000)]
net: preserve ifreq parameter when calling generic phy_mii_ioctl().
The phy_mii_ioctl() function unnecessarily throws away the original ifreq.
We need access to the ifreq in order to support PHYs that can perform
hardware time stamping.
Two maverick drivers filter the ioctl commands passed to phy_mii_ioctl().
This is unnecessary since phylib will check the command in any case.
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sat, 17 Jul 2010 08:48:28 +0000 (08:48 +0000)]
net: add driver hook for tx time stamping.
This patch adds a hook for transmit time stamps. The transmit hook
allows a software fallback for transmit time stamps, for MACs
lacking time stamping hardware. Using the hook will still require
adding an inline function call to each MAC driver.
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pedro Garcia [Sun, 18 Jul 2010 22:38:44 +0000 (15:38 -0700)]
vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)
- Without the 8021q module loaded in the kernel, all 802.1p packets
(VLAN 0 but QoS tagging) are silently discarded (as expected, as
the protocol is not loaded).
- Without this patch in 8021q module, these packets are forwarded to
the module, but they are discarded also if VLAN 0 is not configured,
which should not be the default behaviour, as VLAN 0 is not really
a VLANed packet but a 802.1p packet. Defining VLAN 0 makes it almost
impossible to communicate with mixed 802.1p and non 802.1p devices on
the same network due to arp table issues.
- Changed logic to skip vlan specific code in vlan_skb_recv if VLAN
is 0 and we have not defined a VLAN with ID 0, but we accept the
packet with the encapsulated proto and pass it later to netif_rx.
- In the vlan device event handler, added some logic to add VLAN 0
to HW filter in devices that support it (this prevented any traffic
in VLAN 0 to reach the stack in e1000e with HW filter under 2.6.35,
and probably also with other HW filtered cards, so we fix it here).
- In the vlan unregister logic, prevent the elimination of VLAN 0
in devices with HW filter.
- The default behaviour is to ignore the VLAN 0 tagging and accept
the packet as if it was not tagged, but we can still define a
VLAN 0 if desired (so it is backwards compatible).
Signed-off-by: Pedro Garcia <pedro.netdev@dondevamos.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tetsuo Handa [Sun, 18 Jul 2010 22:29:14 +0000 (15:29 -0700)]
net: Remove MAX_SOCK_ADDR constant
MAX_SOCK_ADDR is no longer used because commit
230b1839 "net: Use standard
structures for generic socket address structures." replaced
"char address[MAX_SOCK_ADDR];" with "struct sockaddr_storage address;".
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Sat, 17 Jul 2010 07:21:28 +0000 (07:21 +0000)]
arcnet: fix signed bug in probe function
probe_irq_off() returns the first irq found or if two irqs are found
then it returns the negative of the first irq found. We can cast
dev->irq to an int so that the test for negative values works.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kulikov Vasiliy [Sat, 17 Jul 2010 05:21:00 +0000 (05:21 +0000)]
net: dccp: fix sign bug
'gap' is unsigned, so this code is wrong:
gap = -new_head;
...
if (gap > 0) { ... }
Make 'gap' signed.
The semantic patch that finds this problem (many false-positive results):
(http://coccinelle.lip6.fr/)
// <smpl>
@ r1 @
identifier f;
@@
int f(...) { ... }
@@
identifier r1.f;
type T;
unsigned T x;
@@
*x = f(...)
...
*x > 0
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Kumar Salecha [Sun, 18 Jul 2010 21:51:59 +0000 (14:51 -0700)]
qlcnic: fix pci resource leak
pci_get_domain_bus_and_slot: caller must decrement the
reference count by calling pci_dev_put().
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shreyas Bhatewara [Thu, 15 Jul 2010 21:51:14 +0000 (21:51 +0000)]
net-next: vmxnet3 fixes [3/5] Initialize link state at probe time
This change initializes the state of link at the time when driver is
loaded. The ethtool output for 'link detected' and 'link speed'
is thus valid even before the interface is brought up.
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stanislaw Gruszka [Thu, 15 Jul 2010 04:25:50 +0000 (04:25 +0000)]
bnx2: use device model DMA API
Use DMA API as PCI equivalents will be deprecated. This change also allow
to allocate with GFP_KERNEL in some places.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stanislaw Gruszka [Thu, 15 Jul 2010 22:55:40 +0000 (22:55 +0000)]
bnx2: allocate with GFP_KERNEL flag on RX path init
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Casey Leedom [Fri, 16 Jul 2010 05:47:06 +0000 (22:47 -0700)]
cxgb4vf: fix SGE resource resource deallocation bug
Fix SGE resource resource deallocation bug. Forgot to increment the RXQ and
TXQ cursors in the loop ...
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ronghua Zang [Fri, 16 Jul 2010 05:18:47 +0000 (22:18 -0700)]
net-next: vmxnet3 fixes [2/5] Interrupt control bitmap
A new bit map 'intrCtrl' is introduced in the DriverShared area. The
driver should update VMXNET3_IC_DISABLE_ALL bit before writing IMR.
Signed-off-by: Ronghua Zang <ronghua@vmware.com>
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shreyas Bhatewara [Fri, 16 Jul 2010 05:17:29 +0000 (22:17 -0700)]
net-next: fix LRO feature update in vmxnet3
Fix LRO feature update.
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 16 Jul 2010 04:41:00 +0000 (21:41 -0700)]
tcp: sizeof struct tcp_skb_cb is 44
Correct comment stating sizeof(struct tcp_skb_cb) is 36 or 40, since its
44 bytes, since commit
951dbc8ac714b04 ([IPV6]: Move nextheader offset
to the IP6CB).
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Thu, 15 Jul 2010 08:47:28 +0000 (08:47 +0000)]
vxge: Version update
Version update
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com>
Signed-off-by: Ramkrishna Vepa <ramkrishna.vepa@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Thu, 15 Jul 2010 08:47:27 +0000 (08:47 +0000)]
vxge: Update maintainers information
Update and correct maintainers information
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com>
Signed-off-by: Ramkrishna Vepa <ramkrishna.vepa@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Thu, 15 Jul 2010 08:47:26 +0000 (08:47 +0000)]
vxge: Update copyright information
Update copyright information to reflect the Exar purchase of Neterion
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com>
Signed-off-by: Ramkrishna Vepa <ramkrishna.vepa@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Thu, 15 Jul 2010 08:47:25 +0000 (08:47 +0000)]
vxge: NETIF_F_LLTX removal
NETIF_F_LLTX and it's usage of local transmit locks are depricated in
favor of using the netdev queue's transmit lock. Remove the local
lock and all references to it, and use the netdev queue transmit lock
in the transmit completion handler.
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: Ramkrishna Vepa <ramkrishna.vepa@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Thu, 15 Jul 2010 08:47:24 +0000 (08:47 +0000)]
vxge: Fix multicast issues
Fix error in multicast flag check, add calls to restore the status of
multicast and promiscuous mode settings after change_mtu, and style
cleanups to shorten the function calls by using a temporary variable.
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com>
Signed-off-by: Ramkrishna Vepa <ramkrishna.vepa@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Thu, 15 Jul 2010 08:47:23 +0000 (08:47 +0000)]
vxge: Remove queue_state references
Remove queue_state references, as they are no longer necessary.
Also, The driver needs to start/stop the queue regardless of which type
of steering is enabled. Remove checks for TX_MULTIQ_STEERING only and
start/stop for all steering types.
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com>
Signed-off-by: Ramkrishna Vepa <ramkrishna.vepa@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kulikov Vasiliy [Thu, 15 Jul 2010 08:47:33 +0000 (08:47 +0000)]
net: bridge: fix sign bug
ipv6_skip_exthdr() can return error code that is below zero.
'offset' is unsigned, so it makes no sense.
ipv6_skip_exthdr() returns 'int' so we can painlessly change type of
offset to int.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kulikov Vasiliy [Thu, 15 Jul 2010 08:45:57 +0000 (08:45 +0000)]
drivers: ixgbevf: fix unsigned underflow
'count' is unsigned. It is initialized to zero, then it can be increased
multiple times, and finally it is used in such a way:
>>>> count--;
|
| /* clear timestamp and dma mappings for remaining portion of packet */
| while (count >= 0) {
| count--;
| ...
^
If count is zero here (so, it was never increased), we would have a very
long loop :)
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kulikov Vasiliy [Thu, 15 Jul 2010 08:45:29 +0000 (08:45 +0000)]
drivers: irda: fix sign bug
platform_get_irq_byname() can return negative results, it is not seen to
unsigned irq. Make it signed.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kulikov Vasiliy [Thu, 15 Jul 2010 08:44:54 +0000 (08:44 +0000)]
drivers: irda: fix sign bug
platform_get_irq_byname() can return negative results, it is not seen to
unsigned irq. Make it signed.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Shevchenko [Thu, 15 Jul 2010 02:37:20 +0000 (02:37 +0000)]
drivers: isdn: get rid of custom strtoul()
There were two methods isdn_gethex() and isdn_getnum() which are custom
implementations of strtoul(). Get rid of them in regard to
strict_strtoul() kernel's function.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Hansjoerg Lipp <hjlipp@web.de>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: gigaset307x-common@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Shevchenko [Thu, 15 Jul 2010 02:37:19 +0000 (02:37 +0000)]
drivers: isdn: remove custom strtoul()
In this case we safe to use strict_strtoul().
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Shevchenko [Thu, 15 Jul 2010 02:37:18 +0000 (02:37 +0000)]
drivers: isdn: use kernel macros to convert hex digit
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Huewe [Thu, 15 Jul 2010 09:07:30 +0000 (09:07 +0000)]
isdn/hisax: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Huewe [Thu, 15 Jul 2010 09:05:38 +0000 (09:05 +0000)]
mISDN: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Huewe [Thu, 15 Jul 2010 09:04:45 +0000 (09:04 +0000)]
isdn/hardware/eicon: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Huewe [Thu, 15 Jul 2010 09:04:07 +0000 (09:04 +0000)]
mISDN: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Huewe [Thu, 15 Jul 2010 09:02:36 +0000 (09:02 +0000)]
isdn/hardware/mISDN: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Huewe [Thu, 15 Jul 2010 08:49:32 +0000 (08:49 +0000)]
atm: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Huewe [Thu, 15 Jul 2010 08:48:26 +0000 (08:48 +0000)]
atm: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Huewe [Thu, 15 Jul 2010 08:45:32 +0000 (08:45 +0000)]
atm: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Huewe [Thu, 15 Jul 2010 08:44:11 +0000 (08:44 +0000)]
atm: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Huewe [Thu, 15 Jul 2010 08:42:12 +0000 (08:42 +0000)]
atm: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Huewe [Thu, 15 Jul 2010 08:41:08 +0000 (08:41 +0000)]
atm: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Huewe [Thu, 15 Jul 2010 08:38:20 +0000 (08:38 +0000)]
atm: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wan ZongShun [Tue, 13 Jul 2010 23:48:45 +0000 (23:48 +0000)]
net/nuc900: enable Mac driver clock
This patch fixed a bug that Mac driver does not work,because I missed the clk enable.
I have ever tested the driver when I submitted previous Mac driver patch,
and it worked good, since my bootloader has enabled the clock in advance.
But when I try to use other bootloader where clock engine was disabled,the
Mac driver does not work, so I send this patch to fix this issue.
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Sat, 10 Jul 2010 07:22:46 +0000 (07:22 +0000)]
drivers/net/mlx4: Use %pV, pr_<level>, printk_once
Remove near duplication of format string constants by using the newly
introduced vsprintf extention %pV to reduce text by 20k or so.
$ size drivers/net/mlx4/built-in.o*
text data bss dec hex filename
161367 1866 48784 212017 33c31 drivers/net/mlx4/built-in.o
142621 1866 46248 190735 2e90f drivers/net/mlx4/built-in.o.new
Use printk_once as appropriate.
Convert printks to pr_<level>, some bare printks now use pr_cont.
Remove now unused #define PFX.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chihau Chau [Thu, 15 Jul 2010 01:27:09 +0000 (18:27 -0700)]
Net: ethernet: pe2.c: fix EXPORT_SYMBOL macro code style issue
This patch fix a code style issue, if a function is exported, the
EXPORT_SYMBOL macro for it should follow immediately after the closing
function brace line.
Signed-off-by: Chihau Chau <chihau@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas de Pesloüan [Thu, 15 Jul 2010 01:24:54 +0000 (18:24 -0700)]
bonding: fix a buffer overflow in bonding_show_queue_id.
The test for buffer overflow ensures we have room for 6 more bytes.
sprintf, called with %s:%d, slave->dev->name, slave->queue_id may yield
far more than 6 bytes.
The correct test is res > (PAGE_SIZE - IFNAMSIZ - 6) .
Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kulikov Vasiliy [Thu, 15 Jul 2010 00:57:19 +0000 (17:57 -0700)]
eth16i: fix memory leak
Free allocated netdev if no probe is expected.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 15 Jul 2010 00:56:37 +0000 (17:56 -0700)]
net/sched: potential data corruption
The reset_policy() does:
memset(d->tcfd_defdata, 0, SIMP_MAX_DATA);
strlcpy(d->tcfd_defdata, defdata, SIMP_MAX_DATA);
In the original code, the size of d->tcfd_defdata wasn't fixed and if
strlen(defdata) was less than 31, reset_policy() would cause memory
corruption.
Please Note: The original alloc_defdata() assumes defdata is 32
characters and a NUL terminator while reset_policy() assumes defdata is
31 characters and a NUL. This patch updates alloc_defdata() to match
reset_policy() (ie a shorter string). I'm not very familiar with this
code so please review carefully.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rajesh Borundia [Thu, 15 Jul 2010 00:55:35 +0000 (17:55 -0700)]
netxen: fix for kdump
When the crash kernel is loaded after crash, the device is in unknown state.
So reset the device contexts prior to its creation in case of kdump,
depending upon kernel parameter reset_devices.
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kulikov Vasiliy [Thu, 15 Jul 2010 00:53:18 +0000 (17:53 -0700)]
wd: fix memory leak
Unmap mapped IO in wd_probe1() if register_netdev() failed.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kulikov Vasiliy [Wed, 14 Jul 2010 08:02:47 +0000 (08:02 +0000)]
tulip: formatting of pointers in printk()
Use %p instead of %08x in printk().
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anirban Chakraborty [Tue, 13 Jul 2010 20:33:35 +0000 (20:33 +0000)]
qlcnic: restore NPAR config data after recovery
o NPAR configuration which is programmed in fw, need to
restore after fw recovery.
o Update version to 5.0.7
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sucheta Chakraborty [Tue, 13 Jul 2010 20:33:34 +0000 (20:33 +0000)]
qlcnic: aer support
Pci error recovery support added.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Kumar Salecha [Tue, 13 Jul 2010 20:33:33 +0000 (20:33 +0000)]
qlcnic: fix netdev notifier in error path
netdev notifier are not unregistered if pci_register_driver fails.
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Kumar Salecha [Tue, 13 Jul 2010 20:33:32 +0000 (20:33 +0000)]
qlcnic: disable tx timeout recovery
Disable tx timeout recovery, if auto_fw_reset is disable
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rajesh Borundia [Tue, 13 Jul 2010 20:33:31 +0000 (20:33 +0000)]
qlcnic: fix pause params setting
Turning off rx pause param and autoneg param is not supported so
return error in that case.
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Egger [Wed, 14 Jul 2010 20:41:53 +0000 (13:41 -0700)]
eth_v10: Removing dead ETRAX_NETWORK_RED_ON_NO_CONNECTION
ETRAX_NETWORK_RED_ON_NO_CONNECTION doesn't exist in Kconfig, therefore
removing all references for it from the source code.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Egger [Wed, 14 Jul 2010 20:40:36 +0000 (13:40 -0700)]
cs89x0: Removing dead SH_HICOSH4
SH_HICOSH4 doesn't exist in Kconfig, therefore removing all references
for it from the source code.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Egger [Wed, 14 Jul 2010 20:36:18 +0000 (13:36 -0700)]
cassini: Removing dead CASSINI_NAPI
CASSINI_NAPI doesn't exist in Kconfig, therefore removing all
references for it from the source code.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Egger [Wed, 14 Jul 2010 20:35:45 +0000 (13:35 -0700)]
cassini: Removing dead CASSINI_MULTICAST_REG_WRITE
CASSINI_MULTICAST_REG_WRITE doesn't exist in Kconfig, therefore
removing all references for it from the source code.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Egger [Wed, 14 Jul 2010 19:18:31 +0000 (12:18 -0700)]
cassini: Removing dead CASSINI_QGE_DEBUG
CASSINI_QGE_DEBUG doesn't exist in Kconfig, therefore removing all
references for it from the source code.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Egger [Wed, 14 Jul 2010 19:17:35 +0000 (12:17 -0700)]
net: Removing dead {AR,WAVE}LAN
{AR,WAVE}LAN doesn't exist in Kconfig, therefore removing all
references for it from the source code.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 13 Jul 2010 21:25:13 +0000 (14:25 -0700)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next-2.6
David S. Miller [Tue, 13 Jul 2010 21:20:58 +0000 (14:20 -0700)]
Revert "tc35815: fix iomap leak"
This reverts commit
b31fb86815153be3bc94e8ffb9dbf6e9d7694b2d.
pcim_*() managed drivers do not need explicit resource
releasing like this.
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville [Tue, 13 Jul 2010 19:57:29 +0000 (15:57 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6 into for-davem
Conflicts:
drivers/net/wireless/wl12xx/wl1271_cmd.h
John W. Linville [Tue, 13 Jul 2010 19:31:51 +0000 (15:31 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6
David J. Choi [Tue, 13 Jul 2010 17:09:19 +0000 (10:09 -0700)]
drivers/net: Add Micrel KS8841/42 support to ks8842 driver
Body of the explanation:
-support 16bit and 32bit bus width.
-add device reset for ks8842/8841 Micrel device.
-set 100Mbps as a default for Micrel device.
-set MAC address in both MAC/Switch layer with different sequence for Micrel
device, as mentioned in data sheet.
-use private data to set options both 16/32bit bus width and Micrel device/
Timberdale(FPGA).
-update Kconfig in order to put more information about ks8842 device.
Signed-off-by: David J. Choi <david.choi@micrel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Filip Aben [Tue, 13 Jul 2010 04:21:27 +0000 (21:21 -0700)]
hso: remove driver version
This patch removes the driver version from the driver. This version
hasn't changed since the driver's inclusion in the kernel and is a
source of confusion for some customers.
Signed-off-by: Filip Aben <f.aben@option.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 12 Jul 2010 10:50:24 +0000 (10:50 +0000)]
net/irda: Remove unnecessary casts of private_data
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 12 Jul 2010 10:50:23 +0000 (10:50 +0000)]
net/core: Remove unnecessary casts of private_data
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 12 Jul 2010 10:50:05 +0000 (10:50 +0000)]
drivers/net/caif: Remove unnecessary casts of private_data
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 12 Jul 2010 10:50:02 +0000 (10:50 +0000)]
drivers/isdn: Remove unnecessary casts of private_data
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
chas williams - CONTRACTOR [Sat, 10 Jul 2010 03:42:02 +0000 (03:42 +0000)]
atm: remove IRQF_DISABLED in combination with IRQF_SHARED
Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
Baruch Siach [Sun, 11 Jul 2010 21:12:51 +0000 (21:12 +0000)]
fec: use interrupt for MDIO completion indication
With the move to phylib (commit
e6b043d) I was seeing sporadic "MDIO write
timeout" messages. Measure of the actual time spent showed latency times of
more than 1600us.
This patch uses the MII event indication of the FEC hardware to detect
completion of MDIO transactions.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Sun, 11 Jul 2010 11:18:57 +0000 (11:18 +0000)]
net: autoconvert trivial BKL users to private mutex
All these files use the big kernel lock in a trivial
way to serialize their private file operations,
typically resulting from an earlier semi-automatic
pushdown from VFS.
None of these drivers appears to want to lock against
other code, and they all use the BKL as the top-level
lock in their file operations, meaning that there
is no lock-order inversion problem.
Consequently, we can remove the BKL completely,
replacing it with a per-file mutex in every case.
Using a scripted approach means we can avoid
typos.
file=$1
name=$2
if grep -q lock_kernel ${file} ; then
if grep -q 'include.*linux.mutex.h' ${file} ; then
sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
else
sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
fi
sed -i ${file} \
-e "/^#include.*linux.mutex.h/,$ {
1,/^\(static\|int\|long\)/ {
/^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);
} }" \
-e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
-e '/[ ]*cycle_kernel_lock();/d'
else
sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \
-e '/cycle_kernel_lock()/d'
fi
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Sun, 11 Jul 2010 11:18:53 +0000 (11:18 +0000)]
isdn: autoconvert trivial BKL users to private mutex
All these files use the big kernel lock in a trivial
way to serialize their private file operations,
typically resulting from an earlier semi-automatic
pushdown from VFS.
None of these drivers appears to want to lock against
other code, and they all use the BKL as the top-level
lock in their file operations, meaning that there
is no lock-order inversion problem.
Consequently, we can remove the BKL completely,
replacing it with a per-file mutex in every case.
Using a scripted approach means we can avoid
typos.
file=$1
name=$2
if grep -q lock_kernel ${file} ; then
if grep -q 'include.*linux.mutex.h' ${file} ; then
sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
else
sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
fi
sed -i ${file} \
-e "/^#include.*linux.mutex.h/,$ {
1,/^\(static\|int\|long\)/ {
/^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);
} }" \
-e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
-e '/[ ]*cycle_kernel_lock();/d'
else
sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \
-e '/cycle_kernel_lock()/d'
fi
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 10 Jul 2010 22:45:17 +0000 (22:45 +0000)]
net: sock_free() optimizations
Avoid two extra instructions in sock_free(), to reload
skb->truesize and skb->sk
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changli Gao [Sat, 10 Jul 2010 20:41:55 +0000 (20:41 +0000)]
inet, inet6: make tcp_sendmsg() and tcp_sendpage() through inet_sendmsg() and inet_sendpage()
a new boolean flag no_autobind is added to structure proto to avoid the autobind
calls when the protocol is TCP. Then sock_rps_record_flow() is called int the
TCP's sendmsg() and sendpage() pathes.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
include/net/inet_common.h | 4 ++++
include/net/sock.h | 1 +
include/net/tcp.h | 8 ++++----
net/ipv4/af_inet.c | 15 +++++++++------
net/ipv4/tcp.c | 11 +++++------
net/ipv4/tcp_ipv4.c | 3 +++
net/ipv6/af_inet6.c | 8 ++++----
net/ipv6/tcp_ipv6.c | 3 +++
8 files changed, 33 insertions(+), 20 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>
Changli Gao [Sat, 10 Jul 2010 20:41:06 +0000 (20:41 +0000)]
net: cleanups
remove useless blanks.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
include/net/inet_common.h | 55 ++++-------
include/net/tcp.h | 222 +++++++++++++++++-----------------------------
include/net/udp.h | 38 +++----
3 files changed, 123 insertions(+), 192 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>
Kulikov Vasiliy [Sat, 10 Jul 2010 01:01:44 +0000 (01:01 +0000)]
xtsonic: free irq if sonic_open() fails
xtsonic_open() doesn't check sonic_open() return code. If it is error
we must free requested IRQ.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kulikov Vasiliy [Sat, 10 Jul 2010 01:39:06 +0000 (01:39 +0000)]
macsonic: free irqs if sonic_open() fails
macsonic_open() doesn't check sonic_open() return code. If it is error
we must free requested IRQs.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kulikov Vasiliy [Sat, 10 Jul 2010 01:00:35 +0000 (01:00 +0000)]
jazzsonic: free irq if sonic_open() fails
jazzsonic_open() doesn't check sonic_open() return code. If it is error
we must free requested IRQ.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / openwrt / staging / blogic.git / log