drm/i915: Add ddb size field to device info structure

Adding the ddb size into the devide info will avoid
platform checks while computing wm.

v2: Added comment and WARN_ON if ddb size is zero.(Jani)
v3: Added WARN_ON at the right place.(Jani)

Suggested-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Deepak M <m.deepak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473931870-7724-1-git-send-email-m.deepak@intel.com

drm/i915/guc: general tidying up (submission)

Renaming to more consistent scheme, and updating comments, mostly
about i915_guc_wq_reserve(), aka i915_guc_wq_check_space().

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473711577-11454-4-git-send-email-david.s.gordon@intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: general tidying up (loader)

Renaming to more consistent scheme, delete unused definitions

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473711577-11454-3-git-send-email-david.s.gordon@intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: clarify PMINTRMSK/pm_intr_keep usage

No functional changes; just renaming a bit, tweaking a datatype,
prettifying layout, and adding comments, in particular in the
GuC setup code that touches this data.

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473711577-11454-2-git-send-email-david.s.gordon@intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Only expand COND once in wait_for()

Commentary from Chris Wilson's original version:

> I was looking at some wait_for() timeouts on a slow system, with lots of
> debug enabled (KASAN, lockdep, mmio_debug). Thinking that we were
> mishandling the timeout, I tried to ensure that we loop at least once
> after first testing COND. However, the double test of COND either side
> of the timeout check makes that unlikely. But we can do an equivalent
> loop, that keeps the COND check after testing for timeout (required so
> that we are not preempted between testing COND and then testing for a
> timeout) without expanding COND twice.
>
> The advantage of only expanding COND once is a dramatic reduction in
> code size:
>
>    text    data     bss     dec     hex
>    1308733    5184    1152 1315069  1410fd before
>    1305341    5184    1152 1311677  1403bd after

but it turned out that due to a missing iniitialiser, gcc had "gone
wild trimming undefined code" :( This version acheives a rather more
modest (but still worthwhile) gain of ~550 bytes.

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Original-idea-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zanoni, Paulo R <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473855033-26980-1-git-send-email-david.s.gordon@intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Ignore OpRegion panel type except on select machines

Turns out
commit a05628195a0d ("drm/i915: Get panel_type from OpRegion panel
details") has regressed quite a few machines. So it looks like we
can't use the panel type from OpRegion on all systems, and yet we
absolutely must use it on some specific systems.

Despite trying, I was unable to find any automagic way to determine
if the OpRegion panel type is respectable or not. The only glimmer
of hope I had was bit 8 in the SCIC response, but that turned out to
not work either (it was always 0 on both types of systems).

So, to fix the regressions without breaking the machine we know to need
the OpRegion panel type, let's just add a quirk for this. Only specific
machines known to require the OpRegion panel type will therefore use
it. Everyone else will fall bck to the VBT panel type.

The only known machine so far is a "Conrac GmbH IX45GM2". The PCI
subsystem ID on this machine is just a generic 8086:2a42, so of no use.
Instead we'll go with a DMI match.

I suspect we can now also revert
commit aeddda06c1a7 ("drm/i915: Ignore panel type from OpRegion on SKL")
but let's leave that to a separate patch.

v2: Do the DMI match in the opregion code directly, as dev_priv->quirks
    gets populated too late

Cc: Rob Kramer <rob@solution-space.com>
Cc: Martin van Es <martin@mrvanes.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Marco Krüger <krgsch@gmail.com>
Cc: Sean Greenslade <sean@seangreenslade.com>
Cc: Trudy Tective <bertslany@gmail.com>
Cc: Robin Müller <rm1990@gmx.de>
Cc: Alexander Kobel <a-kobel@a-kobel.de>
Cc: Alexey Shumitsky <alexey.shumitsky@gmail.com>
Cc: Emil Andersen Lauridsen <mine809@gmail.com>
Cc: oceans112@gmail.com
Cc: James Hogan <james@albanarts.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org
References: https://lists.freedesktop.org/archives/intel-gfx/2016-August/105545.html
References: https://lists.freedesktop.org/archives/dri-devel/2016-August/116888.html
References: https://lists.freedesktop.org/archives/intel-gfx/2016-June/098826.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94825
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97060
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97443
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97363
Fixes: a05628195a0d ("drm/i915: Get panel_type from OpRegion panel details")
Tested-by: Marco Krüger <krgsch@gmail.com>
Tested-by: Alexey Shumitsky <alexey.shumitsky@gmail.com>
Tested-by: Sean Greenslade <sean@seangreenslade.com>
Tested-by: Emil Andersen Lauridsen <mine809@gmail.com>
Tested-by: Robin Müller <rm1990@gmx.de>
Tested-by: oceans112@gmail.com
Tested-by: Rob Kramer <rob@solution-space.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473758539-21565-1-git-send-email-ville.syrjala@linux.intel.com
References: http://patchwork.freedesktop.org/patch/msgid/1473602239-15855-1-git-send-email-adrienverge@gmail.com
Acked-by: Jani Nikula <jani.nikula@intel.com>

Revert "drm/i915/psr: Make idle_frames sensible again"

This reverts

commit 1c80c25fb622973dd135878e98d172be20859049
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed May 18 18:47:12 2016 +0200

    drm/i915/psr: Make idle_frames sensible again

There are panels that needs 4 idle frames before entering PSR,
but VBT is unproperly set.

Also lately it was identified that idle frame count calculated at HW
can be off by 1, what makes the minimum of 2, at least.

Without the current vbt+1 we are with the risk of having HW calculating
0 idle frames and entering PSR when it shouldn't. Regardless the lack
of link training.

[Jani: there is some disagreement on the explanation, but the commit
regresses so revert it is.]

References: http://marc.info/?i=20160904191153.GA2328@light.dominikbrodowski.net
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 1c80c25fb622 ("drm/i915/psr: Make idle_frames sensible again")
Cc: drm-intel-fixes@lists.freedesktop.org # v4.8-rc1+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473295351-8766-1-git-send-email-rodrigo.vivi@intel.com

drm/i915: Add support for Kabylake to function obtaining shared PLL

This adds support for KBL in the new function added in commit ID:
commit <f169660ed4e57a03e6f6ed07fe192dbcb7687a0d> that returns a
shared pll in case of DDI platforms.

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473728663-14355-1-git-send-email-manasi.d.navare@intel.com

drm/i915: remove writeq ifdeffery

drm already provides fallback versions of readq and writeq.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473451373-9852-1-git-send-email-matthew.auld@intel.com

drm/i915: Make DP link training channel equalization DP 1.2 Spec compliant

Fix the number of tries in channel euqalization link training sequence
according to DP 1.2 Spec. It returns a boolean depending on channel
equalization pass or failure.

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/dp/i915: Make clock recovery in the link training compliant with DP Spec 1.2

This function cleans up clock recovery loop in link training compliant
tp Dp Spec 1.2. It tries the clock recovery 5 times for the same voltage
or until max voltage swing is reached and removes the additional non
compliant retries. This function now returns a boolean values based on
if clock recovery passed or failed.

v3:
* Better Debug prints in case of failures (Mika Kahola)
v2:
* Rebased on top of new revision of vswing patch (Manasi Navare)

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/dp: Move max. vswing check to it's own function

Wrap the max. vswing check in a separate function.
This makes the clock recovery phase of DP link training cleaner

v3:
Fixed the paranthesis warning (Mika Kahola)
v2:
Fixed the Compiler warning (Mika Kahola)

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/dp: Add a standalone function to obtain shared dpll for HSW/BDW/SKL/BXT

Add the PLL selection code for HSW/BDW/BXT/SKL into a stand-alone function
in order to allow for the implementation of a platform neutral upfront
link training function.

v4:
* Removed dereferencing NULL pointer in  case of failure (Dhinakaran Pandiyan)
v3:
* Add Hooks for all DDI platforms into this standalone function

v2:
* Change the macro to use dev_priv instead of dev (David Weinehall)

Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Flush to GTT domain all GGTT bound objects after hibernation

Recently I have been applying an optimisation to avoid stalling and
clflushing GGTT objects based on their current binding. That is we only
set-to-gtt-domain upon first bind. However, on hibernation the objects
remain bound, but they are in the CPU domain. Currently (since commit
975f7ff42edf ("drm/i915: Lazily migrate the objects after hibernation"))
we only flush scanout objects as all other objects are expected to be
flushed prior to use. That breaks down in the face of the runtime
optimisation above - and we need to flush all GGTT pinned objects
(essentially ringbuffers).

To reduce the burden of extra clflushes, we only flush those objects we
cannot discard from the GGTT. Everything pinned to the scanout, or
current contexts or ringbuffers will be flushed and rebound. Other
objects, such as inactive contexts, will be left unbound and in the CPU
domain until first use after resuming.

Fixes: 7abc98fadfdd ("drm/i915: Only change the context object's domain...")
Fixes: 57e885318119 ("drm/i915: Use VMA for ringbuffer tracking")
References: https://bugs.freedesktop.org/show_bug.cgi?id=94722
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: David Weinehall <david.weinehall@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909201957.2499-1-chris@chris-wilson.co.uk

drm/i915: Shrink objects prior to hibernation

In an attempt to keep the hibernation image as same as possible, let's
try and discard any unwanted pages and our own page arrays.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909190218.16831-1-chris@chris-wilson.co.uk

drm/i915: Serialise execbuf operation after a dma-buf reservation object

Now that we can wait upon fences before emitting the request, it becomes
trivial to wait upon any implicit fence provided by the dma-buf
reservation object.

To protect against failure, we force any asynchronous waits on a foreign
fence to timeout after 10s - so that a stall in another driver does not
permanently cripple ourselves. Still unpleasant though!

Testcase: igt/prime_vgem/fence-wait
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-21-chris@chris-wilson.co.uk

drm/i915: Nonblocking request submission

Now that we have fences in place to drive request submission, we can
employ those to queue requests after their dependencies as opposed to
stalling in the middle of an execbuf ioctl. (However, we still choose to
spin before enabling the IRQ as that is faster - though contentious.)

v2: Do the fence ordering first, where we can still fail.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-20-chris@chris-wilson.co.uk

drm/i915: Avoid incrementing hangcheck whilst waiting for external fence

If we are waiting upon an external fence, from the pov of hangcheck the
engine is stuck on the last submitted seqno. Currently we give a small
increment to the hangcheck score in order to catch a stuck waiter /
driver. Now that we both have an independent wait hangcheck and may be
stuck waiting on an external fence, resetting the GPU has little effect
on that external fence. As we cannot advance by resetting, skip
incrementing the hangcheck score.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-19-chris@chris-wilson.co.uk

drm/i915: Ignore valid but unknown semaphores

If we find a ring waiting on a semaphore for another assigned but not yet
emitted request, treat it as valid and waiting.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-18-chris@chris-wilson.co.uk

drm/i915/guc: Prepare for nonblocking execbuf submission

Currently the presumption is that the request construction and its
submission to the GuC are all under the same holding of struct_mutex. We
wish to relax this to separate the request construction and the later
submission to the GuC. This requires us to reserve some space in the
GuC command queue for the future submission. For flexibility to handle
out-of-order request submission we do not preallocate the next slot in
the GuC command queue during request construction, just ensuring that
there is enough space later.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-17-chris@chris-wilson.co.uk

drm/i915: Prepare object synchronisation for asynchronicity

We are about to specialize object synchronisation to enable nonblocking
execbuf submission. First we make a copy of the current object
synchronisation for execbuffer. The general i915_gem_object_sync() will
be removed following the removal of CS flips in the near future.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-16-chris@chris-wilson.co.uk

drm/i915: Reorder i915_add_request to separate the phases better

Let's avoid mixing sealing the hardware commands for the request and
adding the request to the software tracking.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-15-chris@chris-wilson.co.uk

drm/i915: Drive request submission through fence callbacks

Drive final request submission from a callback from the fence. This way
the request is queued until all dependencies are resolved, at which
point it is handed to the backend for queueing to hardware. At this
point, no dependencies are set on the request, so the callback is
immediate.

A side-effect of imposing a heavier-irqsafe spinlock for execlist
submission is that we lose the softirq enabling after scheduling the
execlists tasklet. To compensate, we manually kickstart the softirq by
disabling and enabling the bh around the fence signaling.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-14-chris@chris-wilson.co.uk

drm/i915: Update reset path to fix incomplete requests

Update reset path in preparation for engine reset which requires
identification of incomplete requests and associated context and fixing
their state so that engine can resume correctly after reset.

The request that caused the hang will be skipped and head is reset to the
start of breadcrumb. This allows us to resume from where we left-off.
Since this request didn't complete normally we also need to cleanup elsp
queue manually. This is vital if we employ nonblocking request
submission where we may have a web of dependencies upon the hung request
and so advancing the seqno manually is no longer trivial.

ABI: gem_reset_stats / DRM_IOCTL_I915_GET_RESET_STATS

We change the way we count pending batches. Only the active context
involved in the reset is marked as either innocent or guilty, and not
mark the entire world as pending. By inspection this only affects
igt/gem_reset_stats (which assumes implementation details) and not
piglit.

ARB_robustness gives this guide on how we expect the user of this
interface to behave:

 * Provide a mechanism for an OpenGL application to learn about
   graphics resets that affect the context.  When a graphics reset
   occurs, the OpenGL context becomes unusable and the application
   must create a new context to continue operation. Detecting a
   graphics reset happens through an inexpensive query.

And with regards to the actual meaning of the reset values:

   Certain events can result in a reset of the GL context. Such a reset
   causes all context state to be lost. Recovery from such events
   requires recreation of all objects in the affected context. The
   current status of the graphics reset state is returned by

enum GetGraphicsResetStatusARB();

   The symbolic constant returned indicates if the GL context has been
   in a reset state at any point since the last call to
   GetGraphicsResetStatusARB. NO_ERROR indicates that the GL context
   has not been in a reset state since the last call.
   GUILTY_CONTEXT_RESET_ARB indicates that a reset has been detected
   that is attributable to the current GL context.
   INNOCENT_CONTEXT_RESET_ARB indicates a reset has been detected that
   is not attributable to the current GL context.
   UNKNOWN_CONTEXT_RESET_ARB indicates a detected graphics reset whose
   cause is unknown.

The language here is explicit in that we must mark up the guilty batch,
but is loose enough for us to relax the innocent (i.e. pending)
accounting as only the active batches are involved with the reset.

In the future, we are looking towards single engine resetting (with
minimal locking), where it seems inappropriate to mark the entire world
as innocent since the reset occurred on a different engine. Reducing the
information available means we only have to encounter the pain once, and
also reduces the information leaking from one context to another.

v2: Legacy ringbuffer submission required a reset following hibernation,
or else we restore stale values to the RING_HEAD and walked over
stolen garbage.

v3: GuC requires replaying the requests after a reset.

v4: Restore engine IRQ after reset (so waiters will be woken!)
    Rearm hangcheck if resetting with a waiter.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-13-chris@chris-wilson.co.uk

drm/i915: Replace wait-on-mutex with wait-on-bit in reset worker

Since we have a cooperative mode now with a direct reset, we can avoid
the contention on struct_mutex and instead try then sleep on the
I915_RESET_IN_PROGRESS bit. If the mutex is held and that bit is
cleared, all is fine. Otherwise, we sleep for a bit and try again. In
the worst case we sleep for an extra second waiting for the mutex to be
released (no one touching the GPU is allowed the struct_mutex whilst the
I915_RESET_IN_PROGRESS bit is set). But when we have a direct reset,
this allows us to clean up the reset worker faster.

v2: Remember to call wake_up_bit() after changing (for the faster wakeup
as promised)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-12-chris@chris-wilson.co.uk

drm/i915: Perform a direct reset of the GPU from the waiter

If a waiter is holding the struct_mutex, then the reset worker cannot
reset the GPU until the waiter returns. We do not want to return -EAGAIN
form i915_wait_request as that breaks delicate operations like
i915_vma_unbind() which often cannot be restarted easily, and returning
-EIO is just as useless (and has in the past proven dangerous). The
remaining WARN_ON(i915_wait_request) serve as a valuable reminder that
handling errors from an indefinite wait are tricky.

We can keep the current semantic that knowing after a reset is complete,
so is the request, by performing the reset ourselves if we hold the
mutex.

uevent emission is still handled by the reset worker, so it may appear
slightly out of order with respect to the actual reset (and concurrent
use of the device).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-11-chris@chris-wilson.co.uk

drm/i915: Mark up all locked waiters

In the next patch we want to handle reset directly by a locked waiter in
order to avoid issues with returning before the reset is handled. To
handle the reset, we must first know whether we hold the struct_mutex.
If we do not hold the struct_mtuex we can not perform the reset, but we do
not block the reset worker either (and so we can just continue to wait for
request completion) - otherwise we must relinquish the mutex.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-10-chris@chris-wilson.co.uk

drm/i915: Expand bool interruptible to pass flags to i915_wait_request()

We need finer control over wakeup behaviour during i915_wait_request(),
so expand the current bool interruptible to a bitmask.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-9-chris@chris-wilson.co.uk

drm/i915: Drop local struct_mutex around intel_init_emon[ilk]

Access to intel_init_emon() is strictly ordered by gt_powersave, using
struct_mutex around it is overkill (and will conflict with the caller
holding struct_mutex themselves).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-8-chris@chris-wilson.co.uk

drm/i915: Separate out reset flags from the reset counter

In preparation for introducing a per-engine reset, we can first separate
the mixing of the reset state from the global reset counter.

The loss of atomicity in updating the reset state poses a small problem
for handling the waiters. For requests, this is solved by advancing the
seqno so that a waiter waking up after the reset knows the request is
complete. For pending flips, we still rely on the increment of the
global reset epoch (as well as the reset-in-progress flag) to signify
when the hardware was reset.

The advantage, now that we do not inspect the reset state during reset
itself i.e. we no longer emit requests during reset, is that we can use
the atomic updates of the state flags to ensure that only one reset
worker is active.

v2: Mika spotted that I transformed the i915_gem_wait_for_error() wakeup
into a waiter wakeup.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470414607-32453-6-git-send-email-arun.siluvery@linux.intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-7-chris@chris-wilson.co.uk

drm/i915: Simplify ELSP queue request tracking

Emulate HW to track and manage ELSP queue. A set of SW ports are defined
and requests are assigned to these ports before submitting them to HW. This
helps in cleaning up incomplete requests during reset recovery easier
especially after engine reset by decoupling elsp queue management. This
will become more clear in the next patch.

In the engine reset case we want to resume where we left-off after skipping
the incomplete batch which requires checking the elsp queue, removing
element and fixing elsp_submitted counts in some cases. Instead of directly
manipulating the elsp queue from reset path we can examine these ports, fix
up ringbuffer pointers using the incomplete request and restart submissions
again after reset.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1470414607-32453-3-git-send-email-arun.siluvery@linux.intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-6-chris@chris-wilson.co.uk

drm/i915: Reorder submitting the requests to ELSP

Just rearrange the code to reduce churn in the next patch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-5-chris@chris-wilson.co.uk

drm/i915: Compute the ELSP register location once

Similar to the issue with reading from the context status buffer,
see commit 26720ab97fea ("drm/i915: Move CSB MMIO reads out of the
execlists lock"), we frequently write to the ELSP register (4 writes per
interrupt) and know we hold the required spinlock and forcewake throughout.
We can further reduce the cost of writing these registers beyond the
I915_WRITE_FW() by precomputing the address of the ELSP register. We also
note that the subsequent read serves no purpose here, and are happy to
see it go.

v2: Address I915_WRITE mistakes in changelog

   text    data     bss     dec     hex filename
1259784    4581     576 1264941  134d2d drivers/gpu/drm/i915/i915.ko
1259720    4581     576 1264877  134ced drivers/gpu/drm/i915/i915.ko

Saves 64 bytes of address recomputation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-4-chris@chris-wilson.co.uk

drm/i915: Record the position of the workarounds in the tail of the request

Rather than blindly assuming we need to advance the tail for
resubmitting the request via the ELSP, record the position.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-3-chris@chris-wilson.co.uk

drm/i915: Only queue requests during execlists submission

Leave the more complicated request dequeueing to the tasklet and instead
just kick start the tasklet if we detect we are adding the first
request.

v2: Play around with list operators until we agree upon something

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-2-chris@chris-wilson.co.uk

drm/i915: Add a sw fence for collecting up dma fences

This is really a core kernel struct in disguise until we can finally
place it in kernel/. There is an immediate need for a fence collection
mechanism that is more flexible than fence-array, in particular being
able to easily drive request submission via events (and not just
interrupt driven). The same mechanism would be useful for handling
nonblocking and asynchronous atomic modesets, parallel execution and
more, but for the time being just create a local sw fence for execbuf.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-1-chris@chris-wilson.co.uk

drm/i915: Move HAS_GUC definition to platform definition

Moving all GPU features to the platform definition allows for
        - standard place when adding new features from new platform
        - possible to see supported features when dumping struct
          definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Make HWS_NEEDS_PHYSICAL the exception

Make the .hws_needs_physical the exception by switching the flag
on earlier platforms since they are fewer to support. Remove the flag on
later GPUs hardware since they all use GTT hws by default.

Switch the logic as well in the driver to reflect this change

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_GMCH_DISPLAY definition to platform

Moving all GPU features to the platform definition allows for
        - standard place when adding new features from new platforms
        - possible to see supported features when dumping struct
          definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_L3_DPF definition to platform definition

Moving all GPU features to the platform definition allows for
        - standard place when adding new features from new platforms
        - possible to see supported features when dumping struct
          definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_LOGICAL_RING_CONTEXTS definition to platform

Moving all GPU features to the platform definition allows for
        - standard place when adding new features from new platforms
        - possible to see supported features when dumping struct
          definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_HW_CONTEXTS definition to platform

Moving all GPU features to the platform definition allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct
  definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Introduce GEN2_FEATURES for device info

Introducing a GEN2_FEATURES macro to simplify the struct definitions by
platforms given that most of the features are common. Inspired by the
GEN7_FEATURES macro done by Ben W. and others.

Use it for 830, 845g, i85x, i865g.

CC: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Introduce GEN3_FEATURES for device info

Introducing a GEN3_FEATURES macro to simplify the struct definitions by
platforms given that most of the features are common. Inspired by the
GEN7_FEATURES macro done by Ben W. and others.

Use it for i915g, i915gm, i945g, i945gm, g33 and pnv.

CC: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Introduce GEN4_FEATURES for device info

Introducing a GEN4_FEATURES macro to simplify the struct
definitions by platforms given that most of the features are common.
Inspired by the GEN7_FEATURES macro done by Ben W. and others.

Use it for i965g, i965gm, g45 and gm45.

CC: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_GMBUS_IRQ definition to platform definition

Moving all GPU features to the platform struct definition allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct
  definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Introduce GEN5_FEATURES for device info

Introducing a GEN5_FEATURES macro to simplify the struct
definitions by platforms given that most of the features are common.
Inspired by the GEN7_FEATURES macro done by Ben W. and others.

Use it for ilk.

CC: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_DP_MST definition to platform definition

Moving all GPU features to the platform struct definition allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct
  definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_RC6p definition to platform definition

Moving all GPU features to the platform struct definition allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct
  definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_RC6 definition to platform definition

Moving all GPU features to the platform struct definition allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct
  definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_RESOURCE_STREAMER definition to platform definition

Moving all GPU features to the platform struct definition allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct
  definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915 Move HAS_CSR definition to platform definition

Moving all GPU features to the platform struct definition allows for
        - standard place when adding new features from new platforms
        - possible to see supported features when dumping struct
          definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Get rid of HAS_CORE_RING_FREQ

No need for HAS_CORE_RING_FREQ as that flag is actually the same as
.has_llc. Feedback from V. Syrjala.

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Remove runtime PM for SNB

Remove runtime PM support for SNB as it breaks hotplug support.
Feedback from V. Syrjala.

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_RUNTIME_PM definition to platform

Moving all GPU features to the platform struct definition allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct
  definitions

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Introduce GEN6_FEATURES for device info

Introducing a GEN6_FEAUTRES macro to simplify the struct definitions by
platforms given that most of the features are common. Inspired by the
GEN7_FEATURES macro done by Ben W. and others.

Use it for snb.

CC: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Remove .is_mobile field from platform struct

As recommended by Ville Syrjala removing .is_mobile field from the
platform struct definition for vlv and hsw+ GPUs as there's no need to
make the distinction in later hardware anymore. Keep it for older GPUs
as it is still needed for ilk-ivb.

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Move HAS_PSR definition to platform struct definition

[patch series] Moving all GPU features to the platform struct definition
allows for
- standard place when adding new features from new platforms
- possible to see supported features when dumping struct definition

Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Split hsw_get_dpll()

Split out the DisplayPort and HDMI pll setup code into separate
functions and refactor the DP code that calculates the pll
so that it doesn't depend on crtc state.
This will be used for acquiring port pll when doing
upfront link training.

Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Split skl_get_dpll()

Split out the DisplayPort and HDMI pll setup code into separate
functions and refactor the DP code does not directly depend on
crtc state, so that the code can be used for upfront link training.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Split bxt_ddi_pll_select()

Split out of bxt_ddi_pll_select() the logic that calculates the pll
dividers and dpll_hw_state into a new function that doesn't depend on
crtc state. This will be used for enabling the port pll when doing
upfront link training.

v2:
* Refactored code so that bxt_clk_div need not be exported (Durga)
v1:
* Rebased on top of intel_dpll_mgr.c (Durga)
* Initial version from Ander on top of intel_ddi.c

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Split intel_ddi_pre_enable() into DP and HDMI versions

Split intel_ddi_pre_enable() into encoder type specific versions that
don't depend on crtc_state. The necessary parameters are passed as
function arguments. This split will be necessary for implementing DP
upfront link training.

v3:
* Rebased onto latest kernel (Manasi)
v2:
* Rebased onto kernel v4.7 (Jim)

Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Remove ddi_pll_sel from intel_crtc_state

The value of ddi_pll_sel is derived from the selection of shared dpll,
so just calculate the final value when necessary.

v2: Actually remove it from crtc state and delete remaining usages. (CI)

Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Don't pass crtc_state to intel_dp_set_link_params()

Decouple intel_dp_set_link_params() from struct intel_crtc_state. This
will be useful for implementing DP upfront link training.

v2:
* Rebased on atomic state changes (Manasi)

Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Revert "drm/i915: Check live status before reading edid"

This reverts commit 237ed86c693d8a8e4db476976aeb30df4deac74b.

Our current implementation of live status check (repeat 9 times
with 10ms delays between each attempt as a workaround for
buggy displays) imposes a rather serious penalty, time wise,
on intel_hdmi_detect().  Since we we already skip live status
checks on platforms before gen 7, and since we seem to have
coped quite well before the live status check was introduced
for newer platforms too, the previous behaviour is probably
preferable, at least unless someone can point to a use-case
that the live status check improves (apart from "Bspec says so".)

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Fixes: 237ed86c693d ("drm/i915: Check live status before reading edid")
Fixes: f8d03ea0053b ("drm/i915: increase the tries for HDMI hotplug live status checking")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97139
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94014
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160817124748.31208-1-david.weinehall@linux.intel.com

drm/i915/skl: Don't try to update plane watermarks if they haven't changed

i915 sometimes needs to disable planes in the middle of an atomic
commit, and then reenable them later in the same commit. Because of
this, we can't make the assumption that the state of the plane actually
changed. Since the state of the plane hasn't actually changed, neither
have it's watermarks. And if the watermarks hasn't changed then we
haven't populated skl_results with anything, which means we'll end up
zeroing out a plane's watermarks in the middle of the atomic commit
without restoring them later.

Simple reproduction recipe:
 - Get a SKL laptop, launch any kind of X session
 - Get two extra monitors
 - Keep hotplugging both displays (so that the display configuration
   jumps from 1 active pipe to 3 active pipes and back)
 - Eventually underrun

Changes since v1:
 - Fix incorrect use of "it's"
Changes since v2:
 - Add reproduction recipe

Signed-off-by: Lyude <cpaul@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 62e0fb880123 ("drm/i915/skl: Update plane watermarks atomically during plane updates")
Signed-off-by: Lyude <cpaul@redhat.com>
Testcase: kms_plane
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472488288-27280-1-git-send-email-cpaul@redhat.com
Cc: drm-intel-fixes@lists.freedesktop.org

drm/i915: Remove 64b mmio write vfuncs

We don't have safe 64-bit mmio writes as they are really split into
2x32-bit writes. This tearing is dangerous as the hardware *will*
operate on the intermediate value, requiring great care when assigning.
(See, for example, i965_write_fence_reg.) As such we don't currently use
them and strongly advise not to us them. Go one step further and remove
the 64-bit write vfuncs.

v2: Add some more details to the comment about why WRITE64 is absent,
and why you need to think twice before using READ64.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160906144538.4204-1-chris@chris-wilson.co.uk

drm/i915: disable 48bit full PPGTT when vGPU is active

Disable 48bit full PPGTT on vGPU too for now.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160906040412.1274-3-zhenyuw@linux.intel.com

drm/i915: enable vGPU detection for all

vGPU capability is handled by GVT-g host driver, not needed to
put extra HW check for vGPU detection. And we'll actually support
vGPU from BDW.

Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160906040412.1274-2-zhenyuw@linux.intel.com

drm/i915: Don't wait for a spinlock inside error capture

If we can't grab the breadcrumb's spinlock, possibly due to a driver
deadlock inside the waiters, ignore them. Like hangcheck, error
capturing must work no matter how the driver/GPU dies.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160906073844.22561-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/guc: revisit GuC loader message levels

Some downgraded from DRM_ERROR() to DRM_WARN() or DRM_NOTE(),
a few upgraded from DRM_INFO() to DRM_NOTE() or DRM_WARN(),
and one eliminated completely.

v2: different permutation of levels :)
v3: convert a couple of "this shouldn't happen" messages to WARN()

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/guc: downgrade some DRM_ERROR() messages to DRM_WARN()

Where we're going to continue regardless of the problem, rather than
fail, then the message should be a WARNing rather than an ERROR.

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm: extra printk() wrapper macros

We had only DRM_INFO() and DRM_ERROR(), whereas the underlying printk()
provides several other useful intermediate levels such as NOTICE and
WARNING. So this patch fills out the set by providing both regular and
once-only macros for each of the levels INFO, NOTICE, and WARNING, using
a common underlying macro that does all the token-pasting.

DRM_ERROR is unchanged, as it's not just a printk wrapper.

v2:
    Fix whitespace, missing ## (Eric Engestrom)

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: debugfs/i915_gem_interrupt_info does not need struct_mutex

i915_gem_interrupt_info() only looks at mmio registers, and the waiters
under a spinlock. It doesn't need struct_mutex (but does need the rpm
wakelock for mmio access). Maybe useful using get_if_notidle?

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160903065343.25151-2-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: debugfs/i915_gem_seqno_info does not need rpm nor struct_mutex

i915_gem_seqno_info() supplies its own spinlocks to access the waiters,
and doesn't need any GGTT or mmio access.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160903065343.25151-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915/bdw: sseu: Fix sseu status parsing

Currently when checking for fused off EUs we may ignore the EU count in
an enabled slice if there is any disabled slice preceding the enabled
one (with a lower slice ID). Perhaps this can't happen in reality, but
there is no reason to have this assumption built-in, the code is clearer
without it.

Reviewed-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-8-git-send-email-imre.deak@intel.com

drm/i915: sseu: Add debug printf for slice/subslice masks

Reviewed-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-7-git-send-email-imre.deak@intel.com

drm/i915: sseu: Convert subslice count fields to subslice mask

In an upcoming patch we'll need the actual mask of subslices in addition
to their count, so convert the subslice_per_slice field to a mask.
Also we can easily calculate subslice_total from the other fields, so
instead of storing a cached version of this, add a helper to calculate
it.

v2:
- Use hweight8() on u8 typed vars instead of hweight32(). (Ben)

Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915: sseu: Convert slice count field to mask

In an upcoming patch we'll need the actual mask of slices in addition to
their count, so replace the count field with a mask.

v2:
- Use hweight8() on u8 typed vars instead of hweight32(). (Ben)

Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-5-git-send-email-imre.deak@intel.com

drm/i915: sseu: Simplify debugfs status/info printing

Reviewed-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-4-git-send-email-imre.deak@intel.com

drm/i915: sseu: Use sseu_dev_info in device info

Move all slice/subslice/eu related properties to the sseu_dev_info
struct.

No functional change.

v2:
- s/info/sseu/ based on the new struct name. (Ben)

Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>

drm/i915: sseu: Move sseu_dev_status to i915_drv.h

The data in this struct is provided both by getting the
slice/subslice/eu features available on a given platform and the actual
runtime state of these same features which depends on the HW's current
power saving state.

Atm members of this struct are duplicated in sseu_dev_status and
intel_device_info. For clarity and code reuse we can share one struct
for both of the above purposes. This patch only moves the struct to the
header file, the next patch will convert users of intel_device_info to
use this struct too.

Instead of unsigned int u8 is used now, which is big enough and is used
anyway in intel_device_info.

No functional change.

v2:
- s/stat/sseu/ based on the new struct name (Ben)

Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-2-git-send-email-imre.deak@intel.com

drm/i915: Cleanup i915_param()

Rather than having a separate case for each value where we just return
a hardcoded value = 1, we lump them all together and rely on the awesome
case-fallthrough feature of C.

Fix all feature macros to pass dev_priv instead of dev while at it,
and use INTEL_GEN() instead of INTEL_INFO()->gen.

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160902104617.29089-1-david.weinehall@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Drop mutex around clearing error state

The error state itself is guarded by a spinlock (admittedly even that is
overkill for a single pointer!) and doesn't require us to take the
struct_mutex in the debugfs/sysfs interface. Removing the struct_mutex
removes one more potential blockage when trying to debug a deadlock.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160901205510.31307-1-chris@chris-wilson.co.uk
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com

drm/i915: Update DRIVER_DATE to 20160902

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Use atomic for dev_priv->mm.bsd_engine_dispatch_index

Use atomic type and operands for dev_priv->mm.bsd_engine_dispatch_index
to avoid one struct_mutex locking scenario.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1472731101-21982-1-git-send-email-joonas.lahtinen@linux.intel.com

drm/i915: Fix other intel_dp warnings too.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/backlight: handle enabled but zero duty cycle at module load

Don't consider enabled but zero duty cycle backlight disabled. Clamp
level between min and max for sanity.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471939811-9817-1-git-send-email-maarten.lankhorst@linux.intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Fix intel_display_crc_init for !DEBUGFS

The mentioned commit changes intel_display_crc_init to take a dev_priv,
but forgets to change the stub.

Cc: David Weinehall <david.weinehall@linux.intel.com>
Fixes: 36cdd0138b7f ("drm/i915: debugfs spring cleaning")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-and-by: Kim Lidström <kim@dxtr.im>
Link: http://patchwork.freedesktop.org/patch/msgid/1472116022-17598-1-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>

drm/i915: Add missing parameter to intel_dp_set_drrs_state documentation.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472116022-17598-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: remove leftover for_each_intel_crtc_masked

The last user of for_each_intel_crtc_masked macro was removed in

commit 0a9ab303b87a94115e361a7f3a15d9f481bc453b
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date:   Tue Apr 21 17:13:04 2015 +0300

    drm/i915: Remove all *_pipes flags from modeset

Get rid of the unused macro.

Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472126651-13825-1-git-send-email-jani.nikula@intel.com

drm/i915: Make for_each_engine_masked() more compact and quicker

Rather than walk the full array of engines checking whether each is in
the mask in turn, we can use the mask to jump to the right engines. This
should quicker for a sparse array of engines or mask, whilst generating
smaller code:

   text    data     bss     dec     hex filename
1251010    4579     800 1256389  132bc5 drivers/gpu/drm/i915/i915.ko
1250530    4579     800 1255909  1329e5 drivers/gpu/drm/i915/i915.ko

The downside is that we have to pass in a temporary, alas no C99
iterators yet.

[P.S. Joonas doesn't like having to pass extra temporaries into the
macro, and even less that I called them tmp. As yet, we haven't found a
macro that avoids passing in a temporary that is smaller. We probably
will get C99 iterators first!]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160827075401.16470-2-chris@chris-wilson.co.uk

drm/i915: Tidy reporting busy status during i915_gem_retire_requests()

As we know by inspection whether any engine is still busy as we retire
all the requests, we can pass that information back via return value
rather than check again afterwards.

v2: A little more polish missed in patch splitting

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160827075401.16470-1-chris@chris-wilson.co.uk

drm/i915: Allow the user to pass a context to any ring

With full-ppgtt, we want the user to have full control over their memory
layout, with a separate instance per context. Forcing them to use a
shared memory layout for !RCS not only duplicates the amount of work we
have to do, but also defeats the memory segregation on offer.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822080350.4964-4-chris@chris-wilson.co.uk
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Add GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE to SNB

According to the CI test machines, SNB also uses the
GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE value to report a bad
GEN6_PCODE_MIN_FREQ_TABLE request.

[  157.744641] WARNING: CPU: 5 PID: 9238 at
drivers/gpu/drm/i915/intel_pm.c:7760 sandybridge_pcode_write+0x141/0x200 [i915]
[  157.744642] Missing switch case (16) in gen6_check_mailbox_status
[  157.744642] Modules linked in: snd_hda_intel i915 ax88179_178a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core mei_me lpc_ich snd_pcm mei broadcom bcm_phy_lib tg3 ptp pps_core [last unloaded: vgem]
[  157.744658] CPU: 5 PID: 9238 Comm: drv_hangman Tainted: G     U  W 4.8.0-rc3-CI-CI_DRM_1589+ #1
[  157.744658] Hardware name: Dell Inc. XPS 8300  /0Y2MRG, BIOS A06 10/17/2011
[  157.744659]  0000000000000000 ffff88011f093a98 ffffffff81426415 ffff88011f093ae8
[  157.744662]  0000000000000000 ffff88011f093ad8 ffffffff8107d2a6 00001e50810d3c9f
[  157.744663]  ffff880128680000 0000000000000008 0000000000000000 ffff88012868a650
[  157.744665] Call Trace:
[  157.744669]  [<ffffffff81426415>] dump_stack+0x67/0x92
[  157.744672]  [<ffffffff8107d2a6>] __warn+0xc6/0xe0
[  157.744673]  [<ffffffff8107d30a>] warn_slowpath_fmt+0x4a/0x50
[  157.744685]  [<ffffffffa0029831>] sandybridge_pcode_write+0x141/0x200 [i915]
[  157.744697]  [<ffffffffa002a88a>] intel_enable_gt_powersave+0x64a/0x1330 [i915]
[  157.744712]  [<ffffffffa006b4cb>] ? i9xx_emit_request+0x1b/0x80 [i915]
[  157.744725]  [<ffffffffa0055ed3>] __i915_add_request+0x1e3/0x370 [i915]
[  157.744738]  [<ffffffffa00428bd>] i915_gem_do_execbuffer.isra.16+0xced/0x1b80 [i915]
[  157.744740]  [<ffffffff811a232e>] ? __might_fault+0x3e/0x90
[  157.744752]  [<ffffffffa0043b72>] i915_gem_execbuffer2+0xc2/0x2a0 [i915]
[  157.744753]  [<ffffffff815485b7>] drm_ioctl+0x207/0x4c0
[  157.744765]  [<ffffffffa0043ab0>] ? i915_gem_execbuffer+0x360/0x360 [i915]
[  157.744767]  [<ffffffff810ea4ad>] ?  debug_lockdep_rcu_enabled+0x1d/0x20
[  157.744769]  [<ffffffff811fe09e>] do_vfs_ioctl+0x8e/0x680
[  157.744770]  [<ffffffff811a2377>] ? __might_fault+0x87/0x90
[  157.744771]  [<ffffffff811a232e>] ? __might_fault+0x3e/0x90
[  157.744773]  [<ffffffff810d3df2>] ?  trace_hardirqs_on_caller+0x122/0x1b0
[  157.744774]  [<ffffffff811fe6cc>] SyS_ioctl+0x3c/0x70
[  157.744776]  [<ffffffff8180fe69>] entry_SYSCALL_64_fastpath+0x1c/0xac

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97491
Fixes: 87660502f1a4 ("drm/i915/gen6+: Interpret mailbox error flags")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20160826105926.3413-1-chris@chris-wilson.co.uk
Acked-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915/debugfs: Add panel delays for eDP

The eDP backlight and panel enable/disable delays are quite
useful to know when measuring time consumed by suspend/resume,
and while the information is printed to the kernel log as debug
messages, having this information in debugfs makes things easier.

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160823092356.7610-1-david.weinehall@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Add I915_PARAM_MMAP_GTT_VERSION to advertise unlimited mmaps

Now that we have working partial VMA and faulting support for all
objects, including fence support, advertise to userspace that it can
take advantage of unlimited GGTT mmaps.

v2: Make room in the kerneldoc for a more detailed explanation of the
limitations of the GTT mmap interface.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160825180519.11341-1-chris@chris-wilson.co.uk

drm/i915/skl: Update DDB values atomically with wms/plane attrs

Now that we can hook into update_crtcs and control the order in which we
update CRTCs at each modeset, we can finish the final step of fixing
Skylake's watermark handling by performing DDB updates at the same time
as plane updates and watermark updates.

The first major change in this patch is skl_update_crtcs(), which
handles ensuring that we order each CRTC update in our atomic commits
properly so that they honor the DDB flush order.

The second major change in this patch is the order in which we flush the
pipes. While the previous order may have worked, it can't be used in
this approach since it no longer will do the right thing. For example,
using the old ddb flush order:

We have pipes A, B, and C enabled, and we're disabling C. Initial ddb
allocation looks like this:

|   A   |   B   |xxxxxxx|

Since we're performing the ddb updates after performing any CRTC
disablements in intel_atomic_commit_tail(), the space to the right of
pipe B is unallocated.

1. Flush pipes with new allocation contained into old space. None
   apply, so we skip this
2. Flush pipes having their allocation reduced, but overlapping with a
   previous allocation. None apply, so we also skip this
3. Flush pipes that got more space allocated. This applies to A and B,
   giving us the following update order: A, B

This is wrong, since updating pipe A first will cause it to overlap with
B and potentially burst into flames. Our new order (see the code
comments for details) would update the pipes in the proper order: B, A.

As well, we calculate the order for each DDB update during the check
phase, and reference it later in the commit phase when we hit
skl_update_crtcs().

This long overdue patch fixes the rest of the underruns on Skylake.

Changes since v1:
 - Add skl_ddb_entry_write() for cursor into skl_write_cursor_wm()
Changes since v2:
 - Use the method for updating CRTCs that Ville suggested
 - In skl_update_wm(), only copy the watermarks for the crtc that was
   passed to us
Changes since v3:
 - Small comment fix in skl_ddb_allocation_overlaps()
Changes since v4:
 - Remove the second loop in intel_update_crtcs() and use Ville's
   suggestion for updating the ddb allocations in the right order
 - Get rid of the second loop and just use the ddb state as it updates
   to determine what order to update everything in (thanks for the
   suggestion Ville)
 - Simplify skl_ddb_allocation_overlaps()
 - Split actual overlap checking into it's own helper

Fixes: 0e8fb7ba7ca5 ("drm/i915/skl: Flush the WM configuration")
Fixes: 8211bd5bdf5e ("drm/i915/skl: Program the DDB allocation")
[omitting CC for stable, since this patch will need to be changed for
such backports first]

Testcase: kms_cursor_legacy
Testcase: plane-all-modeset-transition
Signed-off-by: Lyude <cpaul@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471961565-28540-2-git-send-email-cpaul@redhat.com

drm/i915: Move CRTC updating in atomic_commit into it's own hook

Since we have to write ddb allocations at the same time as we do other
plane updates, we're going to need to be able to control the order in
which we execute modesets on each pipe. The easiest way to do this is to
just factor this section of intel_atomic_commit_tail()
(intel_atomic_commit() for stable branches) into it's own function, and
add an appropriate display function hook for it.

Based off of Matt Rope's suggestions

Changes since v1:
 - Drop pipe_config->base.active check in intel_update_crtcs() since we
   check that before calling the function

Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[omitting CC for stable, since this patch will need to be changed for
such backports first]
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471961565-28540-1-git-send-email-cpaul@redhat.com

drm/i915: Restore lost "Initialized i915" welcome message

A side effect of removing the midlayer from driver loading was the loss
of a useful message announcing to userspace that i915 had successfully
started, e.g.:

[drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0

Reported-by: Timo Aaltonen <tjaalton@ubuntu.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 8f460e2c78f2 ("drm/i915: Demidlayer driver loading")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/20160825072314.17402-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>