git.openwrt.org Git - openwrt/openwrt.git/log

iwinfo: improve ABI version handling and bump to git HEAD

- Encode ABI version in compiled shared object file
- Only ship versioned shared library

a17f561 iwinfo: detect QCA IPQ4019 WiSoC from FDT
ea28dfb iwinfo: export ht and vht operation in scan results
4e22953 iwinfo: export center_chan info for local wifi
74d13fb cli: account for additional digit for frequencies above 10GHz
8bfd8d8 iwinfo: add support for GCMP cipher
618c1e8 iwinfo: add hardware description for QCA MIPS WiSoCs
0702f32 iwinfo: improve center channel handling
51c1336 iwinfo: set center chan unsupported for not-nl80211 driver
23d2722 build: add ability to specify shared object version

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

scripts/feed: no warn on toolchain/linux overwrite

The recent 7f285d "scripts/feeds: warn when skipping core package
override" floods SDK output with warning of overwriting "linux" and
"toolchain" core packages. This should be ignored as these are not
regular packages added via feeds.

While at it slightly improve the warning string.

Signed-off-by: Paul Spooren <mail@aparcar.org>

ipq806x: add space before SPDX identifier (again)

Strictly, an SPDX identifier requires a space between the comment
marker and the identifier itself. This has been addressed in
b69c21738e29 ("treewide: add space before SPDX identifier"), but
some new malformatted identifiers were merged recently.

This could have been prevented by using checkpatch.pl earlier.

Fixes: 1a775a4fd033 ("ipq806x: add support for TP-Link Talon AD7200")
Fixes: 8ddaeaf6424e ("ipq806x: create DTSI for TP-Link AD7200 and C2600")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

ipq806x: improve model name and revision for TP-Link AD7200

The TP-Link AD7200 appears with and without the "Talon" model name
prefix. Let's use both variants for 'make menuconfig' so everybody
can locate the device.

Concerning the revision, the TP-Link page lists v1 and v2 with the
device currently marked as "End of Life". However, the v2 and latest
v1 firmware are byte-identical. Thus, we only need one image for
this device and do not need to include the revision in the image name.

While at it, remove the useless BOARD_NAME variable which only makes
sense in combination with upgrade from legacy stable versions or when
custom upgrade scripts are involved.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

ipq806x: create DTSI for TP-Link AD7200 and C2600

Both devices share most of their setup except buttons and LEDs,
so having a common DTSI removes a lot of duplicate code.

In order to have a shared partitioning scheme, device-id and
product-info from AD7200 have been merged into a single
product-info partition like for C2600.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

ipq806x: clean up DTS file for TP-Link AD7200

This does several cosmetic adjustments for AD7200's DTS:

- Make node name, DT label and label property consistent
- Drop wrong and unused spi4 label
- Use generic flash@0 node name

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

Revert "iwinfo: update to git HEAD"

This reverts commit f1620630e9f3407780ddc554361841f05c996c49.

This update introduces potentially remote exploitable buffer overreads
in IE parsing logic.

It also breaks the ABI without introdcing SOVERSION library versioning.

Furthermore, HT information is incorrectly added for non-HT BSSes.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Revert "rpcd: update to git HEAD"

This reverts commit 190e7939639846b86ab487c50169963382720e2b.

This update introduces a potential null-pointer deref with subsequent rpcd
crash when querying wireless info for non-nl80211 wdevs.

Additionally it wrongly includes ht frequency information for non-ht BSSes.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

ramips: limit 5GHz channels for UniFi 6 Lite

The MT7915 radio currently advertises 2.4GHz channels while the antenna
path only supports 5 GHz. Limit the radio to 5GHz channels to prevent
users from configuring non-supported channels.

Signed-off-by: David Bauer <mail@david-bauer.net>

rpcd: update to git HEAD

fd017ba iwinfo: add ht and vht operation info to wifi scan
4c66b31 iwinfo: export center channel for info ubus call
e28d4a5 iwinfo: add support for 802.11ad and GCMP
5c15f57 iwinfo: return hwmode 'ad' on 802.11ad-only hardware

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

iwinfo: update to git HEAD

a17f561 iwinfo: detect QCA IPQ4019 WiSoC from FDT
ea28dfb iwinfo: export ht and vht operation in scan results
4e22953 iwinfo: export center_chan info for local wifi
74d13fb cli: account for additional digit for frequencies above 10GHz
8bfd8d8 iwinfo: add support for GCMP cipher

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

realtek: fix build issues

This fixes the build problems for the REALTEK target by adding a proper
configuration option for the phy module.

Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>

tools/fakeroot: update to 1.25.3

use PKG_FIXUP:=autoreconf to generate configure
200-hide-dlsym-error.patch deleted due to fixed upstream in another way
other patches refreshed to reflect latest changes

Signed-off-by: Syrone Wong <wong.syrone@gmail.com>

ipq806x: fix LED names of TP-Link Talon AD2700

While the underscore in the name of the USB LEDs was removed from DTS,
/etc/board.d/01_leds also has to reflect that change.

Fixes: 28fd279e5d ("ipq806x: some corrections for TP-Link Talon AD7200")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

ramips: add support for Ubiquiti UniFi 6 Lite

Hardware
--------
MediaTek MT7621AT
256M DDR3
32M SPI-NOR
MediaTek MT7603 2T2R 802.11n 2.4GHz
MediaTek MT7915 2T2R 802.11ax 5GHz

Not Working
-----------
- Bluetooth (connected to UART3)

UART
----

UART is located in the lower left corner of the board. Pinout is

0 - 3V3 (don't connect)
1 - RX
2 - TX
3 - GND

Console is 115200 8N1.

Boot
----

1. Connect to the serial console and connect power.

2. Double-press ESC when prompted

3. Set the fdt address

   $ fdt addr $(fdtcontroladdr)

4. Remove the signature node from the control FDT

   $ fdt rm /signature

5. Transfer and boot the OpenWrt initramfs image to the device.
   Make sure to name the file C0A80114.img and have it reachable at
   192.168.1.1/24

   $ tftpboot; bootm

Installation
------------

1. Connect to the booted device at 192.168.1.20 using username/password
   "ubnt".

2. Update the bootloader environment.

   $ fw_setenv devmode TRUE
   $ fw_setenv boot_openwrt "fdt addr \$(fdtcontroladdr);
     fdt rm /signature; bootubnt"
   $ fw_setenv bootcmd "run boot_openwrt"

3. Transfer the OpenWrt sysupgrade image to the device using SCP.

4. Check the mtd partition number for bs / kernel0 / kernel1

   $ cat /proc/mtd

5. Set the bootselect flag to boot from kernel0

   $ dd if=/dev/zero bs=1 count=1 of=/dev/mtdblock4

6. Write the OpenWrt sysupgrade image to both kernel0 as well as kernel1

   $ dd if=openwrt.bin of=/dev/mtdblock6
   $ dd if=openwrt.bin of=/dev/mtdblock7

7. Reboot the device. It should boot into OpenWrt.

Below are the original installation instructions prior to the discovery
of "devmode=TRUE". They are not required for installation and are
documentation only.

The bootloader employs signature verification on the FIT image
configurations. This way, booting unauthorized image without patching
the bootloader is not possible. Manually configuring the bootcmd in the
U-Boot envronment won't work, as this is restored to the default value
if modified.

The bootloader is made up of three different parts.

1. The SPL performing early board initialization and providing a XModem
   recovery in case the PBL is missing

2. The PBL being the primary U-Boot application and containing the
   control FDT. It is LZMA packed with a uImage header.

3. A Ubiquiti standalone U-Boot application providing the main boot
   routine as well as their recovery mechanism.

In a perfect world, we would only replace the PBL, as the SPL does not
perform checks on the PBLs integrity. However, as the PBL is in the same
eraseblock as the SPL, we need to at least rewrite both.

The bootloader will only verify integrity in case it has a "signature"
node in it's control device-tree. Renaming the signature node to
something else will prevent this from happening.

Warning: These instructions are based on the firmware intially
shipped with the device and potentially brick your device in a way it
can only be recovered using a SPI flasher.

Only (!) proceed if you understand this!

1. Extract the bootloader from the U-Boot partition using the OpenWrt
   initramfs image.

2. Split the bootloader into it's 3 components:

   $ dd if=bootloader.bin of=spl.bin bs=1 skip=0 count=45056
   $ dd if=bootloader.bin of=pbl.uimage bs=1 skip=45056 count=143360
   $ dd if=bootloader.bin of=ubnt.uimage bs=1 skip=188416

3. Strip the uImage header from the PBL

   $ dd if=pbl.uimage of=pbl.lzma bs=64 skip=1

4. Decompress the PBL

   $ lzma -d pbl.lzma --single-stream

   The decompressed PBL sha256sum should be
   d8b406c65240d260cf15be5f97f40c1d6d1b6e61ec3abed37bb841c90fcc1235

5. Open the decompressed PBL using your favorite hexeditor. Locate the
   control FDT at offset 0x4CED0 (0xD00DFEED). At offset 0x4D5BC, the
   label for the signature node is located. Rename the "signature"
   string at this offset to "signaturr".

   The patched PBL sha256sum should be
   d028e374cdb40ba44b6e3cef2e4e8a8c16a3b85eb15d9544d24fdd10eed64c97

6. Compress the patched PBL

   $ lzma -z pbl --lzma1=dict=67108864

   The resulting pbl.lzma file should have the sha256sum
   7ae6118928fa0d0b3fe4ff81abd80ecfd9ba2944cb0f0a462b6ae65913088b42

7. Create the PBL uimage

   $ SOURCE_DATE_EPOCH=1607909492 mkimage -A mips -O u-boot -C lzma
     -n "U-Boot 2018.03 [UniFi,v1.1.40.71]" -a 84000000 -e 84000000
     -T firmware -d pbl.lzma patched_pbl.uimage

   The resulting patched_pbl.uimage should have the sha256sum
   b90d7fa2dcc6814180d3943530d8d6b0d6a03636113c94e99af34f196d3cf2ce

8. Reassemble the complete bootloader

   $ dd if=patched_pbl.uimage of=aligned_pbl.uimage bs=143360 count=1
     conv=sync
   $ cat spl.bin > patched_uboot.bin
   $ cat aligned_pbl.uimage >> patched_uboot.bin
   $ cat ubnt.uimage >> patched_uboot.bin

   The resulting patched_uboot.bin should have the sha256sum
   3e1186f33b88a525687285c2a8b22e8786787b31d4648b8eee66c672222aa76b

9. Transfer your patched bootloader to the device. Also install the
   kmod-mtd-rw package using opkg and load it.

   $ insmod mtd-rw.ko i_want_a_brick=1

   Write the patched bootloader to mtd0

   $ mtd write patched_uboot.bin u-boot

10. Erase the kernel1 partition, as the bootloader might otherwise
    decide to boot from there.

    $ mtd erase kernel1

11. Transfer the OpenWrt sysupgrade image to the device and install
    using sysupgrade.

FIT configurations
------------------

In the future, the MT7621 UniFi6 family can be supported by a single
OpenWrt image.

config@1: U6 Lite
config@2: U6 IW
config@3: U6 Mesh
config@4: U6 Extender
config@5: U6 LR-EA (Early Access - GA is MT7622)

Signed-off-by: David Bauer <mail@david-bauer.net>

ipq806x: some corrections for TP-Link Talon AD7200

Address most comments made by Adrian Schmutzler on the mailing list.
The device name is kept as 'TP-Link Talon AD7200' as that seems to be
the marketing name TP-Link chose for that device, it also matches the
naming scheme for other TP-Link devices (e.g. 'TP-Link Archer C7').

Fixes: 1a775a4fd0 ("ipq806x: add support for TP-Link Talon AD7200")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

build: drop clang wrapper

clang's gcc emulation does the right thing with -print-file-name now,
drop the wrapper

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

ipq806x: add support for TP-Link Talon AD7200

Device hardware: https://deviwiki.com/wiki/TP-LINK_AD7200_(Talon)

The Talon AD7200 is basically an Archer C2600 with a third PCIe lane
and an 802.11ad radio. It looks like the Archers C2600/5400 but the
housing is slightly larger.

Specifications
--------------

  - IPQ8064 dual-core 1400MHz
  - QCA9988 2.4GHz WiFi
  - QCA9990 5GHz WiFi
  - QCA9500 60GHz WiFi
  - 32MB SPI Flash
  - 512MiB RAM
  - 5 GBit Ports (QCA8337)

Installation
------------

Installation is possible from the OEM web interface.
Sysupgrade is possible.
TFTP recovery is possible.
  - Image: AD7200_1.0_tp_recovery.bin

Notes
  - This will be the first 802.11ad device supported by mainline.

Signed-off-by: Gary Cooper <gaco@bitmessage.de>

mac80211: Add wil6210 driver

This patch adds wil6210 driver for Wilocity/QCA based 802.11ad
PCI cards.

Driver uses cfg80211 and nl80211 but not mac80211.
Integration for UCI and LuCI will come in other patches.

Signed-off-by: Robert Marko <robimarko@gmail.com>

linux-firmware: Add wil6210 firmware

This patch adds wil6210 firmware and board files.
Firmware version is not up to date but is only freely redistributable one I found.
Board file is a generic one so most devices and especially those for long distance
PtP links will require so in a ipq-wifi like way.

Signed-off-by: Robert Marko <robimarko@gmail.com>

mac80211: add 802.11ad-support

This adds logic to properly populate defaults in /etc/config/wireless.

Signed-off-by: Gary Cooper <gaco@bitmessage.de>

hostapd: wpa_supplicant: Enable proper GCMP cipher support

This patch enables hostapd.sh to properly configure wpa_supplicant
for when GCMP is used as cipher in station mode.
Without this wpa_supplicant will be unable to connect to AP.
This is needed for wil6210 as it does not support CCMP.

Signed-off-by: Robert Marko <robimarko@gmail.com>

base-files: wifi: add support for 802.11ad

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

netifd: update to git HEAD

0c83439 netifd: wireless: default to GCMP WPA cipher on 802.11ad

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

fstools: fix 'firstboot' on unmounted UBIFS overlay

The usual OpenWrt-way of writing the JFFS2-marker in order to have
a filesystem erased at the next boot fails on UBIFS volumes due to
UBI being a different beast when it comes to writing.
As truncating a UBIFS volume only takes a few milliseconds and has the
desired effect of wiping-out all content of that volume, just do that
instead.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

build: replace which with Bash command built-in

`which` utility is not shipped by default for example on recent Arch
Linux and then any steps relying on its presence fails, like for example
following Python3 prereq build check:

$ python3 --version
Python 3.9.1

$ make
/bin/sh: line 1: which: command not found
/bin/sh: line 1: which: command not found
/bin/sh: line 1: which: command not found
...
Checking 'python3'... failed.
...

Fix this by switching to Bash builtin `command` which should provide
same functionality.

Fixes: FS#3525
Signed-off-by: Petr Štetiar <ynezz@true.cz>

odhcpd: bump to latest version

3bda900 odhcpd: add option for setting preferred lifetime

Signed-off-by: Nick Hainke <vincent@systemli.org>

ath79: keep DTSI files for D-Link SoC-specific

It is good practice to define device tree files based on specific
SoCs. Thus, let's not start to create files that are used across
different architectures.

Duplicate the DTSI file for D-Link DAP-2xxx in order to have one
for qca953x and one for qca955x, respectively.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

ath79: Fix 02_network setup for D-Link DAP-2660 A1

The device is a one-port, but was set up as two-port by the
default case in 02_network. Fix it.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
[commit title/message facelift]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

ath79: add support for D-Link DAP-3320 A1

Specifications:
* QCA9533, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R
* 10/100 Ethernet Port, 802.11af PoE
* IP55 pole-mountable outdoor case

Installation:
* Factory Web UI is at 192.168.0.50
   login with 'admin' and blank password, flash factory.bin
* Recovery Web UI is at 192.168.0.50
   connect network cable, hold reset button during power-on and keep it
   pressed until uploading has started (only required when checksum is ok,
   e.g. for reverting back to oem firmware), flash factory.bin

After flashing factory.bin, additional free space can be reclaimed by
flashing sysupgrade.bin, since the factory image requires some padding
to be accepted for upgrading via OEM Web UI.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>

ath79: add support for D-Link DAP-2680 A1

Specifications:
* QCA9558, 16 MiB Flash, 256 MiB RAM, 802.11n 3T3R
* QCA9984, 802.11ac Wave 2 3T3R
* Gigabit LAN Port (AR8035), 802.11at PoE

Installation:
* Factory Web UI is at 192.168.0.50
   login with 'admin' and blank password, flash factory.bin
* Recovery Web UI is at 192.168.0.50
   connect network cable, hold reset button during power-on and keep it
   pressed until uploading has started (only required when checksum is ok,
   e.g. for reverting back to oem firmware), flash factory.bin

After flashing factory.bin, additional free space can be reclaimed by
flashing sysupgrade.bin, since the factory image requires some padding
to be accepted for upgrading via OEM Web UI.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>

ath79: add support for D-Link DAP-2230 A1

Specifications:
* QCA9533, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R
* 10/100 Ethernet Port, 802.11af PoE

Installation:
* Factory Web UI is at 192.168.0.50
   login with 'admin' and blank password, flash factory.bin
* Recovery Web UI is at 192.168.0.50
   connect network cable, hold reset button during power-on and keep it
   pressed until uploading has started (only required when checksum is ok,
   e.g. for reverting back to oem firmware), flash factory.bin

After flashing factory.bin, additional free space can be reclaimed by
flashing sysupgrade.bin, since the factory image requires some padding
to be accepted for upgrading via OEM Web UI.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>

x86/efi: add FAT32 esp mounting support

Adds a new function get_magic_fat32() in base-files to read FAT32 magic.
Now FAT32 EFI system partition can be handled in the same way as FAT12/FAT16.

Signed-off-by: Kagurazaka Kotori <kagurazakakotori@gmail.com>
[replace '-o' with '] || [' to satisfy shellsheck]
Signed-off-by: Paul Spooren <mail@aparcar.org>

usbutils: remove

This package is not needed in base. It will be imported in the packages
feed.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Paul Spooren <mail@aparcar.org>

usbreset: remove redundant package

The package `usbutils` already offers an USB reset function, this
package is therefore not really required standalone.

CC: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Paul Spooren <mail@aparcar.org>

hostapd: add support for custom per-BSS options

This adds an option "hostapd_bss_options" that does the same as
"hostapd_options" but on a per-BSS level, instead of a per-device level.

This can be used, for example, to configure different per-devce sae_passwords
per BSS or to augment some of the existing per-BSS options.

Signed-off-by: Florian Beverborg <flo@beverb.org>
[remove whitespace errors, bump release]
Signed-off-by: Paul Spooren <mail@aparcar.org>

ipq806x: consolidate DTS files directory

Commit 29ca10e537ee ("ipq806x: remove support for kernel 4.19") moved
DTS files to "files" directory, but after that a new DTS file was added
to the former "files-5.4" directory. Move it to the new directory.

Fixes: 98b86296e67d ("ipq806x: add support for ASRock G10")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>

mediatek: remove unnecessary execute permission bit

Kernel config does not need to be executable. 644 is enough.

Fixes: 25d9df670b85 ("mediatek: add v5.4 support")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[split by targets]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

ipq40xx: remove unnecessary execute permission bit

DTS files do not need to be executable. 644 is enough.

Fixes: 0fbdb51f7643 ("ipq40xx: add Edgecore OAP-100 support")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[split by targets]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

ath79: fix ethernet-phy label for dlink,dap-2660-a1

The phy label/node name should correspond to the reg property.

While at it, use more common decimal notation for reg property itself.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

mac80211: replace legacy minstrel with minstrel_ht, improve rate selection

Legacy minstrel is essentially unmaintained and was showing poor performance
Replace it with minstrel_ht and improve rate selection and sampling behavior

Signed-off-by: Felix Fietkau <nbd@nbd.name>

wolfssl: enable HAVE_SECRET_CALLBACK

Fixes wpad-wolfssl build

Signed-off-by: Felix Fietkau <nbd@nbd.name>

scripts/qemustart: use squashfs instead of ext4

The qemustart script currently picks the ext4 filesystem rather than
squashfs, while the latter is default for nearly all OpenWrt targets.

Change the default behaviour of qemustart to be in line with the rest.

Signed-off-by: Paul Spooren <mail@aparcar.org>

build: use CCACHE_DIR for ccache directory

It is being set by rules.mk with the same expression.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>

wolfssl: Fix hostapd build with wolfssl 4.6.0

This fixes the following build problem in hostapd:
mipsel-openwrt-linux-musl/bin/ld: /builder/shared-workdir/build/tmp/ccN4Wwer.ltrans7.ltrans.o: in function `crypto_ec_point_add':
<artificial>:(.text.crypto_ec_point_add+0x170): undefined reference to `ecc_projective_add_point'
mipsel-openwrt-linux-musl/bin/ld: <artificial>:(.text.crypto_ec_point_add+0x18c): undefined reference to `ecc_map'
mipsel-openwrt-linux-musl/bin/ld: /builder/shared-workdir/build/tmp/ccN4Wwer.ltrans7.ltrans.o: in function `crypto_ec_point_to_bin':
<artificial>:(.text.crypto_ec_point_to_bin+0x40): undefined reference to `ecc_map'

Fixes: ba40da9045f7 ("wolfssl: Update to v4.6.0-stable")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ipq806x: reenable CONFIG_CMDLINE_OVERRIDE and ASRock G10

This reverts commit 57e4cc8261ca6f0b32e4da6922a8f52ef82c4dc6.

Cmdline override patch was fixed. It's time for reenable
Asrock G10 support.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Tested-by: Hannu Nyman <hannu.nyman@iki.fi> (run-tested for R7800)

ipq806x: fix 900-arm-add-cmdline-override.patch

900-arm-add-cmdline-override.patch have missplaced entry in
arch/arm/Kconfig file. It causes problem with other cmdline
patches. This patch put Kconfig entry in correct place.

Fixes: 98b86296e67d ("ipq806x: add support for ASRock G10")
Suggested-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Tested-by: Hannu Nyman <hannu.nyman@iki.fi> (run-tested for R7800)

build: drop ccache variables from specific targets

With commit 2ca084cc ("build: improve ccache support") these variables
are being set globally and we don't need them for specific targets.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>

libevent2: trigger rebuild on libevent2-pthreads

The symbol determines if the libevent2-pthreads libraries get built or not.
If we want to select libevent2-pthreads, and these haven't been built, an
error will occur mentioning that there are no 'libevent_pthreads-2.1.so'
files.

Adding CONFIG_PACKAGE_libevent2-pthreads to PKG_CONFIG_DEPEND will make
sure that the libraries get re-built in case libevent2-pthreads is
selected.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

base-files: allow reusing of boolean value extraction logic

The `functions.sh` script has `config_get_bool()` function, which is
usable when using UCI config direct access API, but there is no
equivalent for the callback API. Introduce `get_bool()` function to
allow reusing it from init scripts.

Example:

```sh
option_cb() {
    local option="$1"
    local value="$(get_bool "$2")"
    ...
}
```

Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>

kernel/modules: remove fake users from udptunnel{4,6}

Since we're now able to select CONFIG_NET_UDP_TUNNEL at will, drop the fake
dependencies.

This is a partial revert of commit d7e040f8bccec06b64c82963be6435101423dbf1
"kernel: add fake users for udptunnel and iptunnel modules".

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

kernel/hack-5.4: make UDP tunneling user-selectable

UDP tunneling support isn't user-selectable, but it's required by WireGuard
which is, for the time being, an out-of-tree module. We currently work around
this issue by selecting an unrelated module which depends on UDP tunnelling
(VXLAN). This is inconvenient, as it implies this unrelated module needs to be
built-in when doing a monolithic build.

Fix this inconvenience by making UDP tunneling user-selectable in the kernel
configuration.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

kernel-build: fix STRIP_KERNEL_EXPORTS for 64-bit kernels

While parsing the nm output, we need to account for the fact that 64-bit kernels
have 64-bit wide addresses. While at it, replace the grep | sed combo with a
single awk invocation and a stronger regex.

Fixes: 2ef0acc5fcda557fa5aaad35d27cb8cf75be96d2 "kernel-build: fix
STRIP_KERNEL_EXPORTS for recent kernels"

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

cryptodev-linux: bump to 1.11, fix build against kernel 5.10.

This patch bumps cryptodev-linux to the latest stable release (1.11) and fixes
compilation against the next LTS (and likely OpenWrt) kernel 5.10.

Signed-off-by: Stijn Segers <foss@volatilesystems.org>

trace-cmd: update to 2.9.1

Fixed license information.

Adjusted Makefile to new install paths.

Backported upstream patch to fix compilation with musl. Replaces local
and incomplete patch.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

ppp: Remove already applied patch

This patch was already applied upstream and not needed here.

Fixes: 06403981e1f2 ("ppp: update to version 2.4.7.git-2019-05-06")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

wolfssl: Update to v4.6.0-stable

This version fixes a large number of bugs, although no security
vulnerabilities are listed.

Full changelog at:
https://www.wolfssl.com/docs/wolfssl-changelog/
or, as part of the version's README.md:
https://github.com/wolfSSL/wolfssl/blob/v4.6.0-stable/README.md

Due a number of API additions, size increases from 374.7K to 408.8K for
arm_cortex_a9_vfpv3-d16. The ABI does not change from previous version.

Backported patches were removed; remaining patch was refreshed.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>

ath79: drop upstreamed patch

This patch was backported to the 5.4 kernel tree as commit
c2d5c4df27e0 at least since release v5.4.28. Since then, it enables RX
an TX ready override twice.

Signed-off-by: David Bauer <mail@david-bauer.net>

kernel: bump 5.4 to 5.4.86

Removed upstreamed patches:
  pending-5.4/499-mtd-parser-cmdline-Fix-parsing-of-part-names-with-co.patch

Manually merged:
  pending-5.4/611-netfilter_match_bypass_default_table.patch
  layerscape/302-dts-0112-arm64-dts-fsl-ls1028a-prepare-dts-for-overlay.patch

Build-tested: ipq806x/R7800, bcm27xx/bcm2711, ath79/{generic,tiny},
              ipq40xx, octeon, ramips/mt7621, realtek, x86/64
Run-tested: ipq806x/R7800, realtek

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: John Audia <graysky@archlinux.us>
Tested-by: Stijn Segers <foss@volatilesystems.org>

iproute2: update to 5.10.0

c8faeca5 (ss: mptcp: fix add_addr_accepted stat print, 2020-11-18)
0d78e8ea (tc: pedit: fix memory leak in print_pedit, 2020-12-11)
ec1346ac (devlink: fix memory leak in cmd_dev_flash(), 2020-12-11)
309e6027 (man: tc-flower: fix manpage, 2020-12-11)
376367d9 (uapi: merge in change to bpf.h, 2020-12-14)
2e80ae89 (Merge branch 'gcc-10' into main, 2020-12-03)
755b1c58 (tc/mqprio: json-ify output, 2020-12-02)
975c4944 (ip/netns: use flock when setting up /run/netns, 2020-11-27)
fb054cb3 (uapi: update devlink.h, 2020-11-29)
c95d63e4 (uapi: update devlink.h, 2020-11-29)
cae2e929 (f_u32: fix compiler gcc-10 compiler warning, 2020-11-29)
c0149839 (misc: fix compiler warning in ifstat and nstat, 2020-11-29)
2319db90 (tc: fix compiler warnings in ip6 pedit, 2020-11-29)
5bdc4e91 (bridge: fix string length warning, 2020-11-29)
f8176999 (devlink: fix uninitialized warning, 2020-11-29)
7a49ff9d (bridge: report correct version, 2020-11-15)
8682f588 (tc-mpls: fix manpage example and help message string, 2020-11-02)
7c7a0fe0 (tc-vlan: fix help and error message strings, 2020-11-02)
72f88bd4 (uapi: update kernel headers from 5.10-rc2, 2020-11-08)
b90c39be (rdma: fix spelling error in comment, 2020-11-08)
c8424b73 (man: fix spelling errors, 2020-11-08)
cbf64817 (tc/m_gate: fix spelling errors, 2020-11-08)
14b189f0 (uapi: updates from 5.10-rc1, 2020-11-03)
9fc5bf73 (libnetlink: define __aligned conditionally, 2020-10-26)
eb12cc9a (Merge branch 'main' into next, 2020-10-25)
f1298d76 (m_mpls: test the 'mac_push' action after 'modify', 2020-10-22)
2b7a7684 (Merge branch 'tipc-encryption' into next, 2020-10-20)
2bf1ba5a (tipc: add option to set rekeying for encryption, 2020-10-16)
5fb36818 (tipc: add option to set master key for encryption, 2020-10-16)
b4edd6a8 (Merge branch 'tc-mpls-l2-vpn' into next Guillaume Nault  says:, 2020-10-20)
02a261b5 (m_mpls: add mac_push action, 2020-10-19)
d61167dd (m_vlan: add pop_eth and push_eth actions, 2020-10-19)
3342688a (devlink: display elapsed time during flash update, 2020-10-14)
cb7ce51c (v5.9.0, 2020-10-15)
b5a583fb (Merge branch 'main' into next Signed-off-by: David Ahern <dsahern@gmail.com>, 2020-10-11)
78120128 (genl: ctrl: print op -> policy idx mapping, 2020-10-03)
91c54917 (Merge branch 'bridge-igmpv3-mldv2' into next Nikolay Aleksandrov  says:, 2020-10-11)
86588450 (bridge: mdb: print protocol when available, 2020-10-08)
2de81d1e (bridge: mdb: print source list when available, 2020-10-08)
1d28c480 (bridge: mdb: print filter mode when available, 2020-10-08)
e331677e (bridge: mdb: show igmpv3/mldv2 flags, 2020-10-08)
f94e8b07 (bridge: mdb: print fast_leave flag, 2020-10-08)
547b3197 (bridge: mdb: add support for source address, 2020-10-08)
f905191a (Update kernel headers, 2020-10-11)
4322b13c (ip xfrm: support setting XFRMA_SET_MARK_MASK attribute in states, 2020-10-02)
8dc1db80 (devlink: Add health reporter test command support, 2020-10-01)
01216471 (devlink: support setting the overwrite mask attribute, 2020-09-30)
34be2d26 (Update kernel headers, 2020-10-07)
d2be31d9 (ss: add support for xdp statistics, 2020-09-24)
f481515c (Update kernel headers, 2020-09-29)
b8663da0 (ip: promote missed packets to the -s row, 2020-09-16)
cec67df9 (Merge branch 'devlink-controller-external-info' into next Parav Pandit  says:, 2020-09-22)
748cbad3 (devlink: Show controller number of a devlink port, 2020-09-18)
8fadd011 (devlink: Show external port attribute, 2020-09-18)
454429e8 (Update kernel headers, 2020-09-22)
ad34d5fa (iproute2: ss: add support to expose various inet sockopts, 2020-08-19)
c8eb4b52 (Update kernel headers, 2020-09-08)
abee772f (tipc: support 128bit node identity for peer removing, 2020-08-27)
6fd53b2a (iplink: add support for protodown reason, 2020-08-28)
af27494d (ip xfrm: support printing XFRMA_SET_MARK_MASK attribute in states, 2020-08-28)
275eed9b (Merge branch 'main' into next, 2020-09-01)
cc889b82 (genl: ctrl: support dumping netlink policy, 2020-08-24)
d5acae24 (libnetlink: add nl_print_policy() helper, 2020-08-24)
784fa9f6 (libnetlink: add rtattr_for_each_nested() iteration macro, 2020-08-24)

OpenWrt patches unchanged.
Successfully built for ramips/mt7621 and x86/geode with:

CONFIG_PACKAGE_devlink=m
CONFIG_PACKAGE_genl=m
CONFIG_PACKAGE_ip-bridge=m
CONFIG_PACKAGE_ip-full=m
CONFIG_PACKAGE_ip-tiny=m
CONFIG_PACKAGE_nstat=m
CONFIG_PACKAGE_rdma=m
CONFIG_PACKAGE_ss=m
CONFIG_PACKAGE_tc=m

Minimally run-tested ip-tiny on ramips/mt7621 (ubnt-erx).

Signed-off-by: Russell Senior <russell@personaltelco.net>

tools/fakeroot: remove undefined symbol messages

glibc started to return errors from dlerror() for dlsym() lookup failures which
results in a lot of messages from fakeroot like

dlsym(acl_get_fd): staging_dir/host/lib/libfakeroot.so: undefined symbol: acl_get_fd
dlsym(acl_get_file): staging_dir/host/lib/libfakeroot.so: undefined symbol: acl_get_file
dlsym(acl_set_fd): staging_dir/host/lib/libfakeroot.so: undefined symbol: acl_set_fd

when building OpenWrt using a recent glibc. Use the patch from the upstream
Debian package to silence these messages.

Link: https://bugs.debian.org/830912
Fixes: FS#3393
Signed-off-by: Sven Wegener <sven.wegener@stealer.net>

build/prereq: merge ifndef IB block together

Multiple prereq checks are only required within the build system but not
for the ImageBuilder. These checks are excluded by using ifndef IB.

This commit merges the three ifndef IB blocks together.

Signed-off-by: Paul Spooren <mail@aparcar.org>

hostapd: do not restart hostapd instance on wireless restarts

Add the flag that prevents netifd from killing hostapd/wpa_supplicant

Signed-off-by: Felix Fietkau <nbd@nbd.name>

netifd: update to the latest version

39fb8c3edc74 wireless: add support for not killing processes on teardown

Signed-off-by: Felix Fietkau <nbd@nbd.name>

vxlan: allow for dynamic source ip selection (FS#3426)

By setting 'auto', the zero address or the empty string as source
address (option ipaddr, option ip6addr), vxlan will choose one
dynamically. This helps in setups where a wan ip or prefix changes.

This corresponse to setting up an vxlan tunnel with:

proto vxlan6:
# ip link add vx0 type vxlan id ID local :: ...
proto vxlan:
# ip link add vx0 type vxlan id ID local 0.0.0.0 ...

While it is possible to not specify a source ip at all, the kernel will
default to setting up a ipv4 tunnel. The kernel will take any hint from
source and peer ips to figure out, what tunnel type to use. To make sure
we setup an ipv6 tunnel for proto vxlan6, this workaround is needed.

This will not change the behaviour of currently working configurations.
However this will allow former broken configurations, namely those not
specifying both a source address and tunnel interface, to setup a
tunnel interface. Previously those configurations weren't reporting an
error and were stueck in a setup loop like in Bug FS#3426.

This change lifts the currently very strict behaviour and should fix the
following bug:

Fixes: FS#3426
Ref: https://bugs.openwrt.org/index.php?do=details&task_id=3426

Signed-off-by: Johannes Kimmel <fff@bareminimum.eu>

ccache: update to 4.1

Upstream switched to building with CMake. Adjust accordingly.

Reapplied patch as upstream changed the file format.

Added HOST_BUILD_PARALLEL for faster compilation.

Added cmake tool dependency and removed circular dependencies as a
result.

Adjusted dependent tools to use NOCACHE as they are needed to build
ccache.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

ipq40xx: remove non-existent ethernet PHY

Since updating the MDIO driver, the probe will fail hard on any
PHY not present on the bus, while this was not the case prior.

Fixes commit 26b1f72381fb ("ipq40xx: net: phy: ar40xx: remove PHY
handling")
Signed-off-by: David Bauer <mail@david-bauer.net>

ath79: Add support for OpenMesh OM5P

Device specifications:
======================

* Qualcomm/Atheros AR9344 rev 2
* 560/450/225 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 2T2R 5 GHz Wi-Fi
* 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
  - eth0
    + builtin switch port 1
    + used as LAN interface
  - eth1
    + 18-24V passive POE (mode B)
    + used as WAN interface
* 12-24V 1A DC
* internal antennas

WAN/LAN LEDs appear to be wrong in ar71xx and have been swapped here.

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):

   setenv serverip 192.168.1.21
   setenv ipaddr 192.168.1.1
   tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr

The actual sysupgrade image can then be transferred (on the LAN port) to the
device via

  scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

  sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin

Signed-off-by: Sven Eckelmann <sven@narfation.org>
[add LED swap comment]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

ath79: Add support for OpenMesh OM2P v2

Device specifications:
======================

* Qualcomm/Atheros AR9330 rev 1
* 400/400/200 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 1T1R 2.4 GHz Wi-Fi
* 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
  - eth0
    + builtin switch port 1
    + used as LAN interface
  - eth1
    + 18-24V passive POE (mode B)
    + used as WAN interface
* 12-24V 1A DC
* external antenna

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):

   setenv serverip 192.168.1.21
   setenv ipaddr 192.168.1.1
   tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr

The actual sysupgrade image can then be transferred (on the LAN port) to
the device via

  scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

  sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin

Signed-off-by: Sven Eckelmann <sven@narfation.org>

ath79: Add support for OpenMesh OM2P-LC

Device specifications:
======================

* Qualcomm/Atheros AR9330 rev 1
* 400/400/200 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 1T1R 2.4 GHz Wi-Fi
* 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
  - eth0
    + builtin switch port 1
    + used as LAN interface
  - eth1
    + 18-24V passive POE (mode B)
    + used as WAN interface
* 12-24V 1A DC
* internal antennas

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):

   setenv serverip 192.168.1.21
   setenv ipaddr 192.168.1.1
   tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr

The actual sysupgrade image can then be transferred (on the LAN port) to
the device via

  scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

  sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin

Signed-off-by: Sven Eckelmann <sven@narfation.org>

glibc: update to latest 2.32 commit

1d49bede4d tests-mcheck: New variable to run tests with MALLOC_CHECK_=3

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

odhcp6c: update to git HEAD

eac1961 dhcpv6: fix displaying IA info
0475e18 dhcpv6: display status code as a string

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

base-files: sysupgrade: add function for conffiles retrieval

The find command to retrieve files from /etc/sysupgrade.conf and
/lib/upgrade/keep.d/* is used twice in almost the same way.

Move it into a function to consolidate, enhance readability and make
future adjustments easier.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Paul Spooren <mail@aparcar.org>
Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>

busybox: define BUSYBOX_SYM before the first use

Since PKG_FILE_MODES relies on BUSYBOX_SYM, it should be defined early enough

Signed-off-by: Maxim Storchak <m.storchak@gmail.com>

sdk: invoke bundle-libraries.sh w/o buildroot dirs in $PATH

Invoke bundle-libraries.sh with any buildroot related directory entries
removed from $PATH to avoid picking up cross versions of utilities like
ldd which will not properly work when used against host executables.

This should fix executable bundling for glibc-target SDKs.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

imagebuilder: invoke bundle-libraries.sh w/o buildroot dirs in $PATH

Invoke bundle-libraries.sh with any buildroot related directory entries
removed from $PATH to avoid picking up cross versions of utilities like
ldd which will not properly work when used against host executables.

This should fix executable bundling for glibc-target imagebuilders.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

ath79: add support for OpenMesh OM2P-HS v3

Device specifications:
======================

* Qualcomm/Atheros AR9341 rev 1
* 535/400/200 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 2T2R 2.4 GHz Wi-Fi
* 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
  - eth0
    + 802.3af POE
    + builtin switch port 1
    + used as LAN interface
  - eth1
    + 18-24V passive POE (mode B)
    + used as WAN interface
* 12-24V 1A DC
* internal antennas

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):

   setenv serverip 192.168.1.21
   setenv ipaddr 192.168.1.1
   tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr

The actual sysupgrade image can then be transferred (on the LAN port) to
the device via

  scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

  sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin

Signed-off-by: Sven Eckelmann <sven@narfation.org>

ath79: add support for OpenMesh OM2P-HS v2

Device specifications:
======================

* Qualcomm/Atheros AR9341 rev 1
* 535/400/200 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 2T2R 2.4 GHz Wi-Fi
* 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
  - eth0
    + 802.3af POE
    + builtin switch port 1
    + used as LAN interface
  - eth1
    + 18-24V passive POE (mode B)
    + used as WAN interface
* 12-24V 1A DC
* internal antennas

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):

   setenv serverip 192.168.1.21
   setenv ipaddr 192.168.1.1
   tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr

The actual sysupgrade image can then be transferred (on the LAN port) to
the device via

  scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

  sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin

Signed-off-by: Sven Eckelmann <sven@narfation.org>

ath79: add support for OpenMesh OM2P-HS v1

Device specifications:
======================

* Qualcomm/Atheros AR9341 rev 1
* 535/400/200 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 2T2R 2.4 GHz Wi-Fi
* 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
  - eth0
    + 802.3af POE
    + builtin switch port 1
    + used as LAN interface
  - eth1
    + 18-24V passive POE (mode B)
    + used as WAN interface
* 12-24V 1A DC
* internal antennas

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):

   setenv serverip 192.168.1.21
   setenv ipaddr 192.168.1.1
   tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr

The actual sysupgrade image can then be transferred (on the LAN port) to
the device via

  scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

  sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin

Signed-off-by: Sven Eckelmann <sven@narfation.org>
[drop redundant status from eth1]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

bcm63xx-cfe: update to the latest master

c0b3691 netgear: r8000p: add cferam file
ae870eb asus: gt-ac5300: add cferam file
424b57c sfr: neufbox-6v-foxconn-r0: update cferam file
81a2a8b sfr: neufbox-6v-foxconn-r0: add cferam file
2730361 sercomm: h500-s: add cferam file

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

ath79: increase openmesh sysupgrade copy block size

The upgrade script for the openmesh sysupgrade procedure used always an 1
byte block size. This made it easier to seek the correct position in the CE
image and to make sure the right amount of data was copied. But this also
meant that the reading/writing of data required an excessive amount of
syscalls and copy operations.

A 5.4MB big sysupgrade image on an OM2P-HS v3 needed roughly 120s for the
write operation (170s in total) during the sysupgrade.

But it is possible to reduce this overhead slightly:

* index access to read the file size can be done in single 8 byte chunk
  (while doing the seek with byte granularity) because each size entry is
  example 8 bytes long
* the fwupgrade.cfg can be read as one block (while seeking to its position
  using its actual byte offset) because it should be rather small and fit
  into the RAM easily
* the kernel can be read in 1KB blocks (while seking to its positions using
  its actual byte offset) because the the size of the kernel is always a
  multiple of the NOR flash block size (64KB and 256KB)

This results in a sysupgrade write time of roughly 90s (140s in total).

This could be reduced even further when also using larger chunks for the
rootfs. But the squashfs rootfs image is at the moment always

  (256KB or 64KB) * block + 4 bytes

long. It would be expected that the time for the sysupgrade write could be
reduced to roughly 30s (80s in total) when busybox's dd would support
the iflag count_bytes.

Reported-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>

ath79: Add support for OpenMesh OM2P-HS v4

Device specifications:
======================

* Qualcomm/Atheros QCA9533 v2
* 650/600/217 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 2T2R 2.4 GHz Wi-Fi
* 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
  - eth0
    + 24V passive POE (mode B)
    + used as WAN interface
  - eth1
    + 802.3af POE
    + builtin switch port 1
    + used as LAN interface
* 12-24V 1A DC
* internal antennas

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):

   setenv serverip 192.168.1.21
   setenv ipaddr 192.168.1.1
   tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr

The actual sysupgrade image can then be transferred (on the LAN port) to
the device via

  scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

  sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin

Signed-off-by: Sven Eckelmann <sven@narfation.org>

ath79: Add support for OpenMesh OM2P v4

Device specifications:
======================

* Qualcomm/Atheros QCA9533 v2
* 650/600/217 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 1T1R 2.4 GHz Wi-Fi
* 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
  - eth0
    + Label: Ethernet 1
    + 24V passive POE (mode B)
  - eth1
    + Label: Ethernet 2
    + 802.3af POE
    + builtin switch port 1
* 12-24V 1A DC
* external antenna

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):

   setenv serverip 192.168.1.21
   setenv ipaddr 192.168.1.1
   tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr

The actual sysupgrade image can then be transferred (on the LAN port) to
the device via

  scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

  sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin

Signed-off-by: Sven Eckelmann <sven@narfation.org>
[wrap two very long lines, fix typo in comment]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

ath10k-ct-firmware: update to 022 (2020-11-08)

Runtime-tested on ath79 (TP-Link Archer C7 v2) and ipq806x (Netgear R7800).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

ath10k-ct: update to latest version

Changelog:
- ath10k-ct: Fix invalid use of ath-cb struct

Runtime-tested on ath79 (TP-Link Archer C7 v2) and ipq806x (Netgear R7800).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

ipq806x: disable CONFIG_CMDLINE_OVERRIDE and ASRock G10

After device support for ASRock G10 was added in [1], several
people reported broken ipq806x devices, with one or several of the
following symptoms:

  - Device does not boot
  - Sysupgrade does not work
  - Serial console is broken

The issues appears to be caused by the introduction of the symbol
CONFIG_CMDLINE_OVERRIDE=y in [1].

This patch disables the corresponding symbol again and marks the
ASRock as BROKEN, as it probably won't work properly without it.

Further references:

https://bugs.openwrt.org/index.php?do=details&task_id=3540
https://github.com/openwrt/openwrt/commit/98b86296e67dd2b467212fe1a577656e6d3725da#commitcomment-45455875

[1] 98b86296e67d ("ipq806x: add support for ASRock G10")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

ath79: remove duplicate sysupgrade.bin for dlink_dap-2xxx

sysupgrade.bin has been added to IMAGES twice, resulting in
warnings like:

Makefile:86: warning: overriding recipe for target
'[...]/tmp/openwrt-ath79-generic-dlink_dap-2660-a1-squashfs-sysupgrade.bin'
Makefile:86: warning: ignoring old recipe for target
'[...]/tmp/openwrt-ath79-generic-dlink_dap-2660-a1-squashfs-sysupgrade.bin'

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

ath79/mikrotik: disable building NAND images

The current support for MikroTik NAND-based devices relies on a
gross hack that packs the kernel into a static YAFFS stub, as the
stock bootloader only supports booting a YAFFS-encapsulated kernel.

The problem with this approach is that since the kernel partition is
blindly overwritten without any kind of wear or badblock management
(due to lack of proper support for YAFFS in OpenWRT), the NAND flash
is not worn uniformly and eventually badblocks appear, leading to
unbootable devices.

This issue has been reported here [1] and discussed in more detail
here [2].

[1] https://forum.openwrt.org/t/rb433-bad-sector-cannot-start-openwrt/71519
[2] https://github.com/openwrt/openwrt/pull/3026#issuecomment-673597461

Until a proper fix is found (or the stock bootloader supports other
filesystems), we disable building these images to prevent unknowing
users from risking their devices.

Thanks to Thibaut Varène for summarizing the details above.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

treewide: use more descriptive names for concatenated partitions

A few devices in ath79 and ramips use mtd-concat to concatenate
individual partitions into a bigger "firmware" or "ubi" partition.

However, the original partitions are still present and visible,
and one can write to them directly although this might break the
actual virtual, concatenated partition.

As we cannot do much about the former, let's at least choose more
descriptive names than just "firmwareX" in order to indicate the
concatenation to the user. He might be less tempted into overwriting
a "fwconcat1" than a "firmware1", which might be perceived as an
alternate firmware for dual boot etc.

This applies the new naming consistently for all relevant devices,
i.e. fwconcatX for virtual "firmware" members and ubiconcatX for
"ubi" members.

While at it, use DT labels and label property consistently, and
also use consistent zero-based indexing.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

kernel: add disabled PROC_STRIPPED

Otherwise the missing symbol is added to target config for every kernel
config refresh.

While at it, remove the disabled symbol from target configs.

Fixes: 4943bc5cff47 ("kernel: only strip proc for small flash devices")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>

ethtool: update to version 5.10

The ipkg sizes changes as follows for mips 24kc :
5.9 : ethtool_5.9-1_mips_24kc.ipk 35246
5.10 : ethtool_5.10-1_mips_24kc.ipk 35385

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

kmod-tcp-hybla: new module for hybla congestion control algorithm

Just the module and no default sysctl conf file is provided

Link: https://forum.openwrt.org/t/20-xx-tcp-hybla/83076
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

kmod-tcp-bbr: use AutoProbe

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

kmod-tcp-bbr: leave CONFIG_TCP_CONG_ADVANCED to target config

Since generic has the option set to y and other targets now inherit that
choice, there is no behaviour change

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

kernel: remove target specific setting of CONFIG_TCP_CONG_ADVANCED

The option was introduced in upstream linux commit a6484045 ("[TCP]: Do
not present confusing congestion control options by default.").

The option is set to y in generic config and to the moment does not
incur additional size increment. Make it y for all so that packages
such as kmod-tcp-bbr do not have to set it on every occasion

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

ipq40xx: add support for GL.iNet GL-AP1300

Specifications:
SOC:        Qualcomm IPQ4018 (DAKOTA) ARM Quad-Core
RAM:        256 MiB
FLASH1:     4 MiB NOR
FLASH2:     128 MiB NAND
ETH:        Qualcomm QCA8075
WLAN1:      Qualcomm Atheros QCA4018 2.4GHz 802.11b/g/n 2x2
WLAN2:      Qualcomm Atheros QCA4018 5GHz 802.11n/ac W2 2x2
INPUT:      Reset
LED:        Power, Internet
UART1:      On board pin header near to LED (3.3V, TX, RX, GND), 3.3V without pin - 115200 8N1
OTHER:      On board with BLE module - by cp210x USB serial chip
            On board hareware watchdog with GPIO0 high to turn on, and GPIO4 for watchdog feed

Install via uboot tftp or uboot web failsafe.

By uboot tftp:
(IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-generic-glinet_gl-ap1300-squashfs-nand-factory.ubi
(IPQ40xx) # run lf

By uboot web failsafe:
Push the reset button for 10 seconds util the power led flash faster,
then use broswer to access http://192.168.1.1

Afterwards upgrade can use sysupgrade image.

Signed-off-by: Dongming Han <handongming@gl-inet.com>

ipq806x: add support for NEC Platforms Aterm WG2600HP3

NEC Platforms Aterm WG2600HP3 is a dual-band router based on Qualcomm IPQ8062.

Specification
-------------
- SoC: Qualcomm IPQ8062
- RAM: 512MiB
- Flash memory: SPI-NOR 32MiB (Cypress S25FL256S)
- Wi-Fi: Qualcomm QCA9984 (2.4GHz, 1ch - 13ch)
- Wi-Fi: Qualcomm QCA9984 (5GHz, 36ch - 64ch, 100ch - 140ch)
- Ethernet: 4x 100/1000 Mbps (1x WAN, 4x LAN)
- LED: 6x green LED, 6x red LED
- Input: 2x tactile switch, 1x SP3T slide switch
- Serial console: 115200bps, through-hole J3
  - [  ] [GND] [  ] [TX] [RX] ----> DC jack
- Power: DC 12V 1.5A

This device does not support VHT160 and VHT80+80.
Custom BDFs are required to limit VHT capabilities.

Flash instructions
------------------
1. Setup TFTP server (IP address: 192.168.1.2)
2. Put initramfs image into TFTP server directory
3. Connect WG2600HP3 lan port and computer that runs TFTP server
4. Connect to the serial console
5. Interrupt booting by Esc key (password: chiron)
6. Execute the following commands
    # setenv bootcmd "nboot 0x44000000 1 0x860000"
    # saveenv
    # setenv ipaddr 192.168.1.1
    # setenv serverip 192.168.1.2
    # tftpboot 0x44000000 openwrt-ipq806x-generic-nec_wg2600hp3-initramfs-uImage
7. After booting OpenWrt initramfs image, backup SPI-NOR flash memory
8. Erase firmware partition
    # mtd erase firmware
9. Run sysupgrade

Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>

ipq806x: add support for Qualcomm IPQ8062 SoC

This commit adds support for Qualcomm IPQ8062 SoC.
IPQ8062 is a lower clock variant of IPQ8064.

CPU and NSS clocks:
- CPU: 384 MHz - 1 GHz
- NSS: 110 MHz - 550 MHz

opp and l2 clock values are taken from WG2600HP3 GPL source code [1].

Due to a lack of devices, I didn't test the following features.
- SATA
- NAND flash memory controller
- SD
- USB
- GSBI2, GSBI7
- PCIE2
- GMAC0, GMAC3

Works properly:
- GSBI4 UART
- GSBI5 SPI
- GMAC1, GMAC2
- PCIE0, PCIE1
- MDIO0

Does not work properly:
- CPU SPC
- This can cause a system hang. Same as IPQ8065.
See 2336c2dbb1929837f7e42d4315c8073342a5b46b

[1] https://www.aterm.jp/function/wg2600hp3/appendix/opensource.html

Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>

ipq-wifi: Fix suffix for Plasma Cloud PA2200 QCA4019 board-2.bin

The Makefile is rejecting all files with for a given prefix (here
"board-plasmacloud_pa2200") when it didn't match a known suffix. Instead it
stops the build with an error like:

Makefile:135: *** Unrecognized board-file suffix '.ipq4019' for 'board-plasmacloud_pa2200.ipq4019'. Stop.

The correct suffix for the QCA4019/hw1.0 is qca4019 and not ipq4019.

Fixes: 4871fd2616ac ("ipq40xx: add support for Plasma Cloud PA2200")
Signed-off-by: Sven Eckelmann <sven@narfation.org>

ipq-wifi: Fix suffix for Plasma Cloud PA1200 QCA4019 board-2.bin

The Makefile is rejecting all files with for a given prefix (here
"board-plasmacloud_pa1200") when it didn't match a known suffix. Instead it
stops the build with an error like:

Makefile:135: *** Unrecognized board-file suffix '.ipq4019' for 'board-plasmacloud_pa1200.ipq4019'. Stop.

The correct suffix for the QCA4019/hw1.0 is qca4019 and not ipq4019.

Fixes: ea5bb6bbfee0 ("ipq40xx: add support for Plasma Cloud PA1200")
Signed-off-by: Sven Eckelmann <sven@narfation.org>