git.openwrt.org Git - openwrt/staging/blogic.git/log

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio/vhost fixes and cleanups from Michael Tsirkin:
"Misc fixes and cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio/s390: deprecate old transport
  virtio/s390: keep early_put_chars
  virtio_blk: Fix a slient kernel panic
  virtio-vsock: fix include guard typo
  vhost/vsock: fix vhost virtio_vsock_pkt use-after-free
  9p/trans_virtio: use kvfree() for iov_iter_get_pages_alloc()
  virtio: fix error handling for debug builds
  virtio: fix memory leak in virtqueue_add()

Merge tag 'ceph-for-4.8-rc2' of https://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
"A patch for a NULL dereference bug introduced in 4.8-rc1 and a handful
  of static checker fixes"

* tag 'ceph-for-4.8-rc2' of https://github.com/ceph/ceph-client:
  ceph: initialize pathbase in the !dentry case in encode_caps_cb()
  rbd: nuke the 32-bit pool id check
  rbd: destroy header_oloc in rbd_dev_release()
  ceph: fix null pointer dereference in ceph_flush_snaps()
  libceph: using kfree_rcu() to simplify the code
  libceph: make cancel_generic_request() static
  libceph: fix return value check in alloc_msg_with_page_vector()

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"8 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/slub.c: run free_partial() outside of the kmem_cache_node->list_lock
  rmap: fix compound check logic in page_remove_file_rmap
  mm, rmap: fix false positive VM_BUG() in page_add_file_rmap()
  mm/page_alloc.c: recalculate some of node threshold when on/offline memory
  mm/page_alloc.c: fix wrong initialization when sysctl_min_unmapped_ratio changes
  thp: move shmem_huge_enabled() outside of SYSFS ifdef
  revert "ARM: keystone: dts: add psci command definition"
  rapidio: dereferencing an error pointer

mm/slub.c: run free_partial() outside of the kmem_cache_node->list_lock

With debugobjects enabled and using SLAB_DESTROY_BY_RCU, when a
kmem_cache_node is destroyed the call_rcu() may trigger a slab
allocation to fill the debug object pool (__debug_object_init:fill_pool).

Everywhere but during kmem_cache_destroy(), discard_slab() is performed
outside of the kmem_cache_node->list_lock and avoids a lockdep warning
about potential recursion:

  =============================================
  [ INFO: possible recursive locking detected ]
  4.8.0-rc1-gfxbench+ #1 Tainted: G     U
  ---------------------------------------------
  rmmod/8895 is trying to acquire lock:
   (&(&n->list_lock)->rlock){-.-...}, at: [<ffffffff811c80d7>] get_partial_node.isra.63+0x47/0x430

  but task is already holding lock:
   (&(&n->list_lock)->rlock){-.-...}, at: [<ffffffff811cbda4>] __kmem_cache_shutdown+0x54/0x320

  other info that might help us debug this:
  Possible unsafe locking scenario:
        CPU0
        ----
   lock(&(&n->list_lock)->rlock);
   lock(&(&n->list_lock)->rlock);

   *** DEADLOCK ***
   May be due to missing lock nesting notation
   5 locks held by rmmod/8895:
   #0:  (&dev->mutex){......}, at: driver_detach+0x42/0xc0
   #1:  (&dev->mutex){......}, at: driver_detach+0x50/0xc0
   #2:  (cpu_hotplug.dep_map){++++++}, at: get_online_cpus+0x2d/0x80
   #3:  (slab_mutex){+.+.+.}, at: kmem_cache_destroy+0x3c/0x220
   #4:  (&(&n->list_lock)->rlock){-.-...}, at: __kmem_cache_shutdown+0x54/0x320

  stack backtrace:
  CPU: 6 PID: 8895 Comm: rmmod Tainted: G     U          4.8.0-rc1-gfxbench+ #1
  Hardware name: Gigabyte Technology Co., Ltd. H87M-D3H/H87M-D3H, BIOS F11 08/18/2015
  Call Trace:
    __lock_acquire+0x1646/0x1ad0
    lock_acquire+0xb2/0x200
    _raw_spin_lock+0x36/0x50
    get_partial_node.isra.63+0x47/0x430
    ___slab_alloc.constprop.67+0x1a7/0x3b0
    __slab_alloc.isra.64.constprop.66+0x43/0x80
    kmem_cache_alloc+0x236/0x2d0
    __debug_object_init+0x2de/0x400
    debug_object_activate+0x109/0x1e0
    __call_rcu.constprop.63+0x32/0x2f0
    call_rcu+0x12/0x20
    discard_slab+0x3d/0x40
    __kmem_cache_shutdown+0xdb/0x320
    shutdown_cache+0x19/0x60
    kmem_cache_destroy+0x1ae/0x220
    i915_gem_load_cleanup+0x14/0x40 [i915]
    i915_driver_unload+0x151/0x180 [i915]
    i915_pci_remove+0x14/0x20 [i915]
    pci_device_remove+0x34/0xb0
    __device_release_driver+0x95/0x140
    driver_detach+0xb6/0xc0
    bus_remove_driver+0x53/0xd0
    driver_unregister+0x27/0x50
    pci_unregister_driver+0x25/0x70
    i915_exit+0x1a/0x1e2 [i915]
    SyS_delete_module+0x193/0x1f0
    entry_SYSCALL_64_fastpath+0x1c/0xac

Fixes: 52b4b950b507 ("mm: slab: free kmem_cache_node after destroy sysfs file")
Link: http://lkml.kernel.org/r/1470759070-18743-1-git-send-email-chris@chris-wilson.co.uk
Reported-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rmap: fix compound check logic in page_remove_file_rmap

In page_remove_file_rmap(.) we have the following check:

VM_BUG_ON_PAGE(compound && !PageTransHuge(page), page);

This is meant to check for either HugeTLB pages or THP when a compound
page is passed in.

Unfortunately, if one disables CONFIG_TRANSPARENT_HUGEPAGE, then
PageTransHuge(.) will always return false, provoking BUGs when one runs
the libhugetlbfs test suite.

This patch replaces PageTransHuge(), with PageHead() which will work for
both HugeTLB and THP.

Fixes: dd78fedde4b9 ("rmap: support file thp")
Link: http://lkml.kernel.org/r/1470838217-5889-1-git-send-email-steve.capper@arm.com
Signed-off-by: Steve Capper <steve.capper@arm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Huang Shijie <shijie.huang@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, rmap: fix false positive VM_BUG() in page_add_file_rmap()

PageTransCompound() doesn't distinguish THP from from any other type of
compound pages. This can lead to false-positive VM_BUG_ON() in
page_add_file_rmap() if called on compound page from a driver[1].

I think we can exclude such cases by checking if the page belong to a
mapping.

The VM_BUG_ON_PAGE() is downgraded to VM_WARN_ON_ONCE(). This path
should not cause any harm to non-THP page, but good to know if we step
on anything else.

[1] http://lkml.kernel.org/r/c711e067-0bff-a6cb-3c37-04dfe77d2db1@redhat.com

Link: http://lkml.kernel.org/r/20160810161345.GA67522@black.fi.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Laura Abbott <labbott@redhat.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: recalculate some of node threshold when on/offline memory

Some of node threshold depends on number of managed pages in the node.
When memory is going on/offline, it can be changed and we need to adjust
them.

Add recalculation to appropriate places and clean-up related functions
for better maintenance.

Link: http://lkml.kernel.org/r/1470724248-26780-2-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: fix wrong initialization when sysctl_min_unmapped_ratio changes

Before resetting min_unmapped_pages, we need to initialize
min_unmapped_pages rather than min_slab_pages.

Fixes: a5f5f91da6 (mm: convert zone_reclaim to node_reclaim)
Link: http://lkml.kernel.org/r/1470724248-26780-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: move shmem_huge_enabled() outside of SYSFS ifdef

The newly introduced shmem_huge_enabled() function has two definitions,
but neither of them is visible if CONFIG_SYSFS is disabled, leading to a
build error:

mm/khugepaged.o: In function `khugepaged':
khugepaged.c:(.text.khugepaged+0x3ca): undefined reference to `shmem_huge_enabled'

This changes the #ifdef guards around the definition to match those that
are used in the header file.

Fixes: e496cf3d7821 ("thp: introduce CONFIG_TRANSPARENT_HUGE_PAGECACHE")
Link: http://lkml.kernel.org/r/20160809123638.1357593-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

revert "ARM: keystone: dts: add psci command definition"

Revert commit 51d5d12b8f3d ("ARM: keystone: dts: add psci command
definition"), which was inadvertently added twice.

Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rapidio: dereferencing an error pointer

Original patch: https://lkml.org/lkml/2016/8/4/32

If riocm_ch_alloc() fails then we end up dereferencing the error
pointer.

The problem is that we're not unwinding in the reverse order from how we
allocate things so it gets confusing. I've changed this around so now
"ch" is NULL when we are done with it after we call riocm_put_channel().
That way we can check if it's NULL and avoid calling riocm_put_channel()
on it twice.

I renamed err_nodev to err_put_new_ch so that it better reflects what
the goto does.

Then because we had flipping things around, it means we don't neeed to
initialize the pointers to NULL and we can remove an if statement and
pull things in an indent level.

Link: http://lkml.kernel.org/r/20160805152406.20713-1-alexandre.bounine@idt.com
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm: oabi compat: add missing access checks

Add access checks to sys_oabi_epoll_wait() and sys_oabi_semtimedop().
This fixes CVE-2016-3857, a local privilege escalation under
CONFIG_OABI_COMPAT.

Cc: stable@vger.kernel.org
Reported-by: Chiachih Wu <wuchiachih@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Dave Weinstein <olorin@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus-4.8' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
"Some fixes for btrfs send/recv and fsync from Filipe and Robbie Ko.

  Bonus points to Filipe for already having xfstests in place for many
  of these"

* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: remove unused function btrfs_add_delayed_qgroup_reserve()
  Btrfs: improve performance on fsync against new inode after rename/unlink
  Btrfs: be more precise on errors when getting an inode from disk
  Btrfs: send, don't bug on inconsistent snapshots
  Btrfs: send, avoid incorrect leaf accesses when sending utimes operations
  Btrfs: send, fix invalid leaf accesses due to incorrect utimes operations
  Btrfs: send, fix warning due to late freeing of orphan_dir_info structures
  Btrfs: incremental send, fix premature rmdir operations
  Btrfs: incremental send, fix invalid paths for rename operations
  Btrfs: send, add missing error check for calls to path_loop()
  Btrfs: send, fix failure to move directories with the same name around
  Btrfs: add missing check for writeback errors on fsync

Merge tag 'metag-for-v4.8-rc2' of git://git./linux/kernel/git/jhogan/metag

Pull metag architecture fix from James Hogan:
"A single fix for a boot crash since a commit in the merge window.

  Metag was unusual in calling show_mem() early, before setup_per_cpu_pageset(),
  which is no longer safe.  It doesn't add much value to the log, so the
  fix just drops the call"

* tag 'metag-for-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag: Drop show_mem() from mem_init()

get_maintainer: Don't check if STDIN exists in a VCS repository

If get_maintainer is not given any filename arguments on the command line,
the standard input is read for a patch.

But checking if a VCS has a file named &STDIN is not a good idea and fails.

Verify the nominal input file is not &STDIN before checking the VCS.

Fixes: 4cad35a7ca69 ("get_maintainer.pl: reduce need for command-line option -f")
Reported-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "printk: create pr_<level> functions"

This reverts commit 874f9c7da9a4acbc1b9e12ca722579fb50e4d142.

Geert Uytterhoeven reports:
"This change seems to have an (unintendent?) side-effect.

  Before, pr_*() calls without a trailing newline characters would be
  printed with a newline character appended, both on the console and in
  the output of the dmesg command.

  After this commit, no new line character is appended, and the output
  of the next pr_*() call of the same type may be appended, like in:

    - Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000
    - Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM)
    + Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM)"

Joe Perches says:
"No, that is not intentional.

  The newline handling code inside vprintk_emit is a bit involved and
  for now I suggest a revert until this has all the same behavior as
  earlier"

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Requested-by: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'trace-v4.8-2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
"Fix tick_stop tracepoint symbols for user export.

  Luiz Capitulino noticed that the tick_stop tracepoint wasn't being
  parsed properly by the tracing user space tools.

  This was due to the TRACE_DEFINE_ENUM() being set to a define, when it
  should have been set to the enum itself.  The define was of the MASK
  that used the BIT to shift.  The BIT was the enum and by adding that,
  everything gets converted nicely.  The MASK is still kept just in case
  it gets converted to an enum in the future"

* tag 'trace-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix tick_stop tracepoint symbols for user export

Merge tag 'gcc-plugin-infrastructure-v4.8-rc2' of git://git./linux/kernel/git/kees/linux

Pull gcc plugin improvements from Kees Cook:
"Several fixes/improvements for the gcc plugin infrastructure:

   - fix a problem with gcc plugins interfering with cc-option tests.

   - abort more gracefully when gcc plugin headers or compiler support
     is missing.

   - improve the gcc plugin rule generation to be more dynamic, pass
     arguments, and build from subdirectories"

* tag 'gcc-plugin-infrastructure-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: Add support for plugin subdirectories
  gcc-plugins: Automate make rule generation
  gcc-plugins: Add support for passing plugin arguments
  gcc-plugins: abort builds cleanly when not supported
  kbuild: no gcc-plugins during cc-option tests

Merge tag 'platform-drivers-x86-v4.8-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver update from Darren Hart:
"dell-wmi: ignore battery remove/insert event"

* tag 'platform-drivers-x86-v4.8-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
dell-wmi: Ignore WMI event 0xe00e

Merge tag 'drm-fixes-for-4.8-rc2' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
"This contains a bunch of amdgpu fixes, and some i915 regression fixes.

  It also contains some fixes for an older regression with some EDID
  changes and some 6bpc panels.

  Then there are the lockdep, cirrus and rcar-du regression fixes from
  this window"

* tag 'drm-fixes-for-4.8-rc2' of git://people.freedesktop.org/~airlied/linux:
  drm/cirrus: Fix NULL pointer dereference when registering the fbdev
  drm/edid: Set 8 bpc color depth for displays with "DFP 1.x compliant TMDS".
  drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"
  drm/edid: Add 6 bpc quirk for display AEO model 0.
  drm: Paper over locking inversion after registration rework
  drm: rcar-du: Link HDMI encoder with bridge
  drm/ttm: Wait for a BO to become idle before unbinding it from GTT
  drm/i915/fbdev: Check for the framebuffer before use
  drm/amdgpu: update golden setting of polaris10
  drm/amdgpu: update golden setting of stoney
  drm/amdgpu: update golden setting of polaris11
  drm/amdgpu: update golden setting of carrizo
  drm/amdgpu: update golden setting of iceland
  drm/amd/amdgpu: change pptable output format from ASCII to binary
  drm/amdgpu/ci: add mullins to default case for smc ucode
  drm/amdgpu/gmc7: add missing mullins case
  drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB
  drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL

ipr: Fix sync scsi scan

Commit b195d5e2bffd ("ipr: Wait to do async scan until scsi host is
initialized") fixed async scan for ipr, but broke sync scan for ipr.

This fixes sync scan back up.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reported-and-tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: only mark charged pages with PageKmemcg

To distinguish non-slab pages charged to kmemcg we mark them PageKmemcg,
which sets page->_mapcount to -512.  Currently, we set/clear PageKmemcg
in __alloc_pages_nodemask()/free_pages_prepare() for any page allocated
with __GFP_ACCOUNT, including those that aren't actually charged to any
cgroup, i.e. allocated from the root cgroup context.  To avoid overhead
in case cgroups are not used, we only do that if memcg_kmem_enabled() is
true.  The latter is set iff there are kmem-enabled memory cgroups
(online or offline).  The root cgroup is not considered kmem-enabled.

As a result, if a page is allocated with __GFP_ACCOUNT for the root
cgroup when there are kmem-enabled memory cgroups and is freed after all
kmem-enabled memory cgroups were removed, e.g.

  # no memory cgroups has been created yet, create one
  mkdir /sys/fs/cgroup/memory/test
  # run something allocating pages with __GFP_ACCOUNT, e.g.
  # a program using pipe
  dmesg | tail
  # remove the memory cgroup
  rmdir /sys/fs/cgroup/memory/test

we'll get bad page state bug complaining about page->_mapcount != -1:

  BUG: Bad page state in process swapper/0  pfn:1fd945c
  page:ffffea007f651700 count:0 mapcount:-511 mapping:          (null) index:0x0
  flags: 0x1000000000000000()

To avoid that, let's mark with PageKmemcg only those pages that are
actually charged to and hence pin a non-root memory cgroup.

Fixes: 4949148ad433 ("mm: charge/uncharge kmemcg from generic page allocator paths")
Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ceph: initialize pathbase in the !dentry case in encode_caps_cb()

pathbase is the base inode; set it to 0 if we've got no path.

Coverity-id: 146348
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>

rbd: nuke the 32-bit pool id check

ceph_file_layout::pool_id is now s64. rbd_add_get_pool_id() and
ceph_pg_poolid_by_name() both return an int, so it's bogus anyway.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>

tracing: Fix tick_stop tracepoint symbols for user export

The symbols used in the tick_stop tracepoint were not being converted
properly into integers in the trace_stop format file. Instead we had this:

print fmt: "success=%d dependency=%s", REC->success,
    __print_symbolic(REC->dependency, { 0, "NONE" },
     { (1 << TICK_DEP_BIT_POSIX_TIMER), "POSIX_TIMER" },
     { (1 << TICK_DEP_BIT_PERF_EVENTS), "PERF_EVENTS" },
     { (1 << TICK_DEP_BIT_SCHED), "SCHED" },
     { (1 << TICK_DEP_BIT_CLOCK_UNSTABLE), "CLOCK_UNSTABLE" })

User space tools have no idea how to parse "TICK_DEP_BIT_SCHED" or the other
symbols used to do the bit shifting. The reason is that the conversion was
done with using the TICK_DEP_MASK_* symbols which are just macros that
convert to the BIT shift itself (with the exception of NONE, which was
converted properly, because it doesn't use bits, and is defined as zero).

The TICK_DEP_BIT_* needs to be denoted by TRACE_DEFINE_ENUM() in order to
have this properly converted for user space tools to parse this event.

Cc: stable@vger.kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Fixes: e6e6cc22e067 ("nohz: Use enum code for tick stop failure tracing message")
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

metag: Drop show_mem() from mem_init()

The recent commit 599d0c954f91 ("mm, vmscan: move LRU lists to node"),
changed memory management code so that show_mem() is no longer safe to
call prior to setup_per_cpu_pageset(), as pgdat->per_cpu_nodestats will
still be NULL. This causes an oops on metag due to the call to
show_mem() from mem_init():

  node_page_state_snapshot(...) + 0x48
  pgdat_reclaimable(struct pglist_data * pgdat = 0x402517a0)
  show_free_areas(unsigned int filter = 0) + 0x2cc
  show_mem(unsigned int filter = 0) + 0x18
  mem_init()
  mm_init()
  start_kernel() + 0x204

This wasn't a problem before with zone_reclaimable() as zone_pcp_init()
was already setting zone->pageset to &boot_pageset, via setup_arch() and
paging_init(), which happens before mm_init():

  zone_pcp_init(...)
  free_area_init_core(...) + 0x138
  free_area_init_node(int nid = 0, ...) + 0x1a0
  free_area_init_nodes(...) + 0x440
  paging_init(unsigned long mem_end = 0x4fe00000) + 0x378
  setup_arch(char ** cmdline_p = 0x4024e038) + 0x2b8
  start_kernel() + 0x54

No other arches appear to call show_mem() during boot, and it doesn't
really add much value to the log, so lets just drop it from mem_init().

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-metag@vger.kernel.org

virtio/s390: deprecate old transport

There only ever have been two host implementations of the old
s390-virtio (pre-ccw) transport: the experimental kuli userspace,
and qemu. As qemu switched its default to ccw with 2.4 (with most
users having used ccw well before that) and removed the old transport
entirely in 2.6, s390-virtio probably hasn't been in active use for
quite some time and is therefore likely to bitrot.

Let's start the slow march towards removing the code by deprecating
it.

Note that this also deprecates the early virtio console code, which
has been causing trouble in the guest without being wired up in any
relevant hypervisor code.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio/s390: keep early_put_chars

In case the registration of the hvc tty never happens AND the kernel
thinks that hvc0 is the preferred console we should keep the early
printk function to avoid a kernel panic due to code being removed.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio_blk: Fix a slient kernel panic

We do a lot of memory allocation in function init_vq, and don't handle
the allocation failure properly. Then this function will return 0,
although initialization fails due to lacking memory. At that moment,
kernel will panic in guest machine, if virtio is used to drive disk.

To fix this bug, we should take care of allocation failure, and return
correct value to let caller know what happen.

Tested-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Signed-off-by: Minfei Huang <minfei.hmf@alibaba-inc.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-vsock: fix include guard typo

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost/vsock: fix vhost virtio_vsock_pkt use-after-free

Stash the packet length in a local variable before handing over
ownership of the packet to virtio_transport_recv_pkt() or
virtio_transport_free_pkt().

This patch solves the use-after-free since pkt is no longer guaranteed
to be alive.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

9p/trans_virtio: use kvfree() for iov_iter_get_pages_alloc()

The memory allocated by iov_iter_get_pages_alloc() can be allocated with
vmalloc() if kmalloc() failed -- see get_pages_array().

In that case we need to free it with vfree(), so let's use kvfree().

The bug manifests like this:

BUG: unable to handle kernel paging request at ffffeb0400072da0
IP: [<ffffffff8139c67b>] kfree+0x4b/0x140
PGD 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 2 PID: 675 Comm: trinity-c2 Not tainted 4.7.0-rc7+ #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
task: ffff8800badef2c0 ti: ffff880069208000 task.ti: ffff880069208000
RIP: 0010:[<ffffffff8139c67b>]  [<ffffffff8139c67b>] kfree+0x4b/0x140
RSP: 0000:ffff88006920f3f0  EFLAGS: 00010282
RAX: ffffea0000000000 RBX: ffffc90001cb6000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffffc90001cb6000
RBP: ffff88006920f410 R08: 0000000000000000 R09: dffffc0000000000
R10: ffff8800badefa30 R11: 0000056a3d3b0d9f R12: ffff88006920f620
R13: ffffeb0400072d80 R14: ffff8800baa94078 R15: 0000000000000000
FS:  00007fbd2b437700(0000) GS:ffff88011af00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffeb0400072da0 CR3: 000000006926d000 CR4: 00000000000006e0
Stack:
0000000000000001 ffff88006920f620 ffffed001755280f ffff8800baa94078
ffff88006920f6a8 ffffffff8310442b dffffc0000000000 ffff8800badefa30
ffff8800badefa28 ffff88011af1fba0 1ffff1000d241e98 ffff8800ba892150
Call Trace:
[<ffffffff8310442b>] p9_virtio_zc_request+0x72b/0xdb0
[<ffffffff830f2116>] p9_client_zc_rpc.constprop.8+0x246/0xb10
[<ffffffff830f5d79>] p9_client_read+0x4c9/0x750
[<ffffffff8175ceac>] v9fs_fid_readpage+0x14c/0x320
[<ffffffff8175d0b6>] v9fs_vfs_readpage+0x36/0x50
[<ffffffff812c6f13>] filemap_fault+0x9a3/0xe60
[<ffffffff81331878>] __do_fault+0x158/0x300
[<ffffffff81339e01>] handle_mm_fault+0x1cf1/0x3c80
[<ffffffff810c0aaa>] __do_page_fault+0x30a/0x8e0
[<ffffffff810c10df>] do_page_fault+0x2f/0x80
[<ffffffff810b5b07>] do_async_page_fault+0x27/0xa0
[<ffffffff83296c48>] async_page_fault+0x28/0x30
Code: 00 80 41 54 53 49 01 fd 48 0f 42 05 b0 39 67 02 48 89 fb 49 01 c5 48 b8 00 00 00 00 00 ea ff ff 49 c1 ed 0c 49 c1 e5 06 49 01 c5 <49> 8b 45 20 48 8d 50 ff a8 01 4c 0f 45 ea 49 8b 55 20 48 8d 42
RIP  [<ffffffff8139c67b>] kfree+0x4b/0x140
RSP <ffff88006920f3f0>
CR2: ffffeb0400072da0
---[ end trace f3d59a04bafec038 ]---

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio: fix error handling for debug builds

On error, virtqueue_add calls START_USE but not
END_USE. Thankfully that's normally empty anyway,
but might not be when debugging. Fix it up.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio: fix memory leak in virtqueue_add()

When using the indirect buffers feature, 'desc' is allocated in
virtqueue_add() but isn't freed before leaving on a ring full error,
causing a memory leak.

For example, it seems rather clear that this can trigger
with virtio net if mergeable buffers are not used.

Cc: stable@vger.kernel.org
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

drm/cirrus: Fix NULL pointer dereference when registering the fbdev

cirrus_modeset_init() is initializing/registering the emulated fbdev
and, since commit c61b93fe51b1 ("drm/atomic: Fix remaining places where
!funcs->best_encoder is valid"), DRM internals can access/test some of
the fields in mode_config->funcs as part of the fbdev registration
process.
Make sure dev->mode_config.funcs is properly set to avoid dereferencing
a NULL pointer.

Reported-by: Mike Marshall <hubcap@omnibond.com>
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes: c61b93fe51b1 ("drm/atomic: Fix remaining places where !funcs->best_encoder is valid")
Signed-off-by: Dave Airlie <airlied@redhat.com>

gcc-plugins: Add support for plugin subdirectories

This adds support for building more complex gcc plugins that live in a
subdirectory instead of just in a single source file.

Reported-by: PaX Team <pageexec@freemail.hu>
Signed-off-by: Emese Revfy <re.emese@gmail.com>
[kees: clarified commit message]
Signed-off-by: Kees Cook <keescook@chromium.org>

gcc-plugins: Automate make rule generation

There's no reason to repeat the same names in the Makefile when the .so
files have already been listed. The .o list can be generated from them.

Reported-by: PaX Team <pageexec@freemail.hu>
Signed-off-by: Emese Revfy <re.emese@gmail.com>
[kees: clarified commit message]
Signed-off-by: Kees Cook <keescook@chromium.org>

gcc-plugins: Add support for passing plugin arguments

The latent_entropy plugin needs to pass arguments, so this adds the
support.

Signed-off-by: Emese Revfy <re.emese@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>

gcc-plugins: abort builds cleanly when not supported

When the compiler doesn't support gcc plugins (either due to missing
headers or too old a version), report the problem and abort the build
instead of emitting a warning and letting the build founder with arcane
compiler errors.

Signed-off-by: Kees Cook <keescook@chromium.org>

kbuild: no gcc-plugins during cc-option tests

The gcc-plugins arguments should not be included when performing
cc-option tests.

Steps to reproduce:
1) make mrproper
2) make defconfig
3) enable GCC_PLUGINS, GCC_PLUGIN_CYC_COMPLEXITY
4) enable FUNCTION_TRACER (it will select other options as well)
5) make && make modules

Build errors:
MODPOST 18 modules
ERROR: "__fentry__" [net/netfilter/xt_nat.ko] undefined!
ERROR: "__fentry__" [net/netfilter/xt_mark.ko] undefined!
ERROR: "__fentry__" [net/netfilter/xt_addrtype.ko] undefined!
ERROR: "__fentry__" [net/netfilter/xt_LOG.ko] undefined!
ERROR: "__fentry__" [net/netfilter/nf_nat_sip.ko] undefined!
ERROR: "__fentry__" [net/netfilter/nf_nat_irc.ko] undefined!
ERROR: "__fentry__" [net/netfilter/nf_nat_ftp.ko] undefined!
ERROR: "__fentry__" [net/netfilter/nf_nat.ko] undefined!

Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Emese Revfy <re.emese@gmail.com>
[kees: renamed variable, clarified commit message]
Signed-off-by: Kees Cook <keescook@chromium.org>

drm/edid: Set 8 bpc color depth for displays with "DFP 1.x compliant TMDS".

According to E-EDID spec 1.3, table 3.9, a digital video sink with the
"DFP 1.x compliant TMDS" bit set is "signal compatible with VESA DFP 1.x
TMDS CRGB, 1 pixel / clock, up to 8 bits / color MSB aligned".

For such displays, the DFP spec 1.0, section 3.10 "EDID support" says:

"If the DFP monitor only supports EDID 1.X (1.1, 1.2, etc.)
without extensions, the host will make the following assumptions:

1. 24-bit MSB-aligned RGB TFT
2. DE polarity is active high
3. H and V syncs are active high
4. Established CRT timings will be used
5. Dithering will not be enabled on the host"

So if we don't know the bit depth of the display from additional
colorimetry info we should assume 8 bpc / 24 bpp by default.

This patch adds info->bpc = 8 assignement for that case.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"

This reverts commit 013dd9e03872
("drm/i915/dp: fall back to 18 bpp when sink capability is unknown")

This commit introduced a regression into stable kernels,
as it reduces output color depth to 6 bpc for any video
sink connected to a Displayport connector if that sink
doesn't report a specific color depth via EDID, or if
our EDID parser doesn't actually recognize the proper
bpc from EDID.

Affected are active DisplayPort->VGA converters and
active DisplayPort->DVI converters. Both should be
able to handle 8 bpc, but are degraded to 6 bpc with
this patch.

The reverted commit was meant to fix
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331

A followup patch implements a fix for that specific bug,
which is caused by a faulty EDID of the affected DP panel
by adding a new EDID quirk for that panel.

DP 18 bpp fallback handling and other improvements to
DP sink bpc detection will be handled for future
kernels in a separate series of patches.

Please backport to stable.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: Add 6 bpc quirk for display AEO model 0.

Bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=105331
reports that the "AEO model 0" display is driven with 8 bpc
without dithering by default, which looks bad because that
panel is apparently a 6 bpc DP panel with faulty EDID.

A fix for this was made by commit 013dd9e03872
("drm/i915/dp: fall back to 18 bpp when sink capability is unknown").

That commit triggers new regressions in precision for DP->DVI and
DP->VGA displays. A patch is out to revert that commit, but it will
revert video output for the AEO model 0 panel to 8 bpc without
dithering.

The EDID 1.3 of that panel, as decoded from the xrandr output
attached to that bugzilla bug report, is somewhat faulty, and beyond
other problems also sets the "DFP 1.x compliant TMDS" bit, which
according to DFP spec means to drive the panel with 8 bpc and
no dithering in absence of other colorimetry information.

Try to make the original bug reporter happy despite the
faulty EDID by adding a quirk to mark that panel as 6 bpc,
so 6 bpc output with dithering creates a nice picture.

Tested by injecting the edid from the fdo bug into a DP connector
via drm_kms_helper.edid_firmware and verifying the 6 bpc + dithering
is selected.

This patch should be backported to stable.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'lkdtm-v4.8-rc1' of git://git./linux/kernel/git/kees/linux

Pull lkdtm update from Kees Cook:
"Fix rebuild problem with LKDTM's rodata test"

[ This, and the usercopy branch, both came in before the merge window
  closed, but ended up in my 'need to look more' queue and thus got
  merged only after rc1 was out ]

* tag 'lkdtm-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  lkdtm: Fix targets for objcopy usage
  lkdtm: fix false positive warning from -Wmaybe-uninitialized

Merge tag 'usercopy-v4.8' of git://git./linux/kernel/git/kees/linux

Pull usercopy protection from Kees Cook:
"Tbhis implements HARDENED_USERCOPY verification of copy_to_user and
  copy_from_user bounds checking for most architectures on SLAB and
  SLUB"

* tag 'usercopy-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  mm: SLUB hardened usercopy support
  mm: SLAB hardened usercopy support
  s390/uaccess: Enable hardened usercopy
  sparc/uaccess: Enable hardened usercopy
  powerpc/uaccess: Enable hardened usercopy
  ia64/uaccess: Enable hardened usercopy
  arm64/uaccess: Enable hardened usercopy
  ARM: uaccess: Enable hardened usercopy
  x86/uaccess: Enable hardened usercopy
  mm: Hardened usercopy
  mm: Implement stack frame object validation
  mm: Add is_migrate_cma_page

unsafe_[get|put]_user: change interface to use a error target label

When I initially added the unsafe_[get|put]_user() helpers in commit
5b24a7a2aa20 ("Add 'unsafe' user access functions for batched
accesses"), I made the mistake of modeling the interface on our
traditional __[get|put]_user() functions, which return zero on success,
or -EFAULT on failure.

That interface is fairly easy to use, but it's actually fairly nasty for
good code generation, since it essentially forces the caller to check
the error value for each access.

In particular, since the error handling is already internally
implemented with an exception handler, and we already use "asm goto" for
various other things, we could fairly easily make the error cases just
jump directly to an error label instead, and avoid the need for explicit
checking after each operation.

So switch the interface to pass in an error label, rather than checking
the error value in the caller.  Best do it now before we start growing
more users (the signal handling code in particular would be a good place
to use the new interface).

So rather than

if (unsafe_get_user(x, ptr))
... handle error ..

the interface is now

unsafe_get_user(x, ptr, label);

where an error during the user mode fetch will now just cause a jump to
'label' in the caller.

Right now the actual _implementation_ of this all still ends up being a
"if (err) goto label", and does not take advantage of any exception
label tricks, but for "unsafe_put_user()" in particular it should be
fairly straightforward to convert to using the exception table model.

Note that "unsafe_get_user()" is much harder to convert to a clever
exception table model, because current versions of gcc do not allow the
use of "asm goto" (for the exception) with output values (for the actual
value to be fetched).  But that is hopefully not a limitation in the
long term.

[ Also note that it might be a good idea to switch unsafe_get_user() to
  actually _return_ the value it fetches from user space, but this
  commit only changes the error handling semantics ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rbd: destroy header_oloc in rbd_dev_release()

Purely cosmetic at this point, as rbd doesn't use RADOS namespaces and
hence rbd_dev->header_oloc->pool_ns is always NULL.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

ceph: fix null pointer dereference in ceph_flush_snaps()

Signed-off-by: Yan, Zheng <zyan@redhat.com>

libceph: using kfree_rcu() to simplify the code

The callback function of call_rcu() just calls a kfree(), so we
can use kfree_rcu() instead of call_rcu() + callback function.

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

libceph: make cancel_generic_request() static

Fixes the following sparse warning:

net/ceph/mon_client.c:577:6: warning:
symbol 'cancel_generic_request' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

libceph: fix return value check in alloc_msg_with_page_vector()

In case of error, the function ceph_alloc_page_vector() returns
ERR_PTR() and never returns NULL. The NULL test in the return value
check should be replaced with IS_ERR().

Fixes: 1907920324f1 ('libceph: support for sending notifies')
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

printk: Remove unnecessary #ifdef CONFIG_PRINTK

In commit 874f9c7da9a4 ("printk: create pr_<level> functions"), new
pr_level defines were added to printk.c.

These new defines are guarded by an #ifdef CONFIG_PRINTK - however,
there is already a surrounding #ifdef CONFIG_PRINTK starting a lot
earlier in line 249 which means the newly introduced #ifdef is
unnecessary.

Let's remove it to avoid confusion.

Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Cc: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dell-wmi: Ignore WMI event 0xe00e

WMI event 0xe00e is received when battery was removed or inserted.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

x86/hweight: Don't clobber %rdi

The caller expects %rdi to remain intact, push+pop it make that happen.

Fixes the following kind of explosions on my core2duo machine when
trying to reboot or shut down:

  general protection fault: 0000 [#1] PREEMPT SMP
  Modules linked in: i915 i2c_algo_bit drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea drm netconsole configfs binfmt_misc iTCO_wdt psmouse pcspkr snd_hda_codec_idt e100 coretemp hwmon snd_hda_codec_generic i2c_i801 mii i2c_smbus lpc_ich mfd_core snd_hda_intel uhci_hcd snd_hda_codec snd_hwdep snd_hda_core ehci_pci 8250 ehci_hcd snd_pcm 8250_base usbcore evdev serial_core usb_common parport_pc parport snd_timer snd soundcore
  CPU: 0 PID: 3070 Comm: reboot Not tainted 4.8.0-rc1-perf-dirty #69
  Hardware name:                  /D946GZIS, BIOS TS94610J.86A.0087.2007.1107.1049 11/07/2007
  task: ffff88012a0b4080 task.stack: ffff880123850000
  RIP: 0010:[<ffffffff81003c92>]  [<ffffffff81003c92>] x86_perf_event_update+0x52/0xc0
  RSP: 0018:ffff880123853b60  EFLAGS: 00010087
  RAX: 0000000000000001 RBX: ffff88012fc0a3c0 RCX: 000000000000001e
  RDX: 0000000000000000 RSI: 0000000040000000 RDI: ffff88012b014800
  RBP: ffff880123853b88 R08: ffffffffffffffff R09: 0000000000000000
  R10: ffffea0004a012c0 R11: ffffea0004acedc0 R12: ffffffff80000001
  R13: ffff88012b0149c0 R14: ffff88012b014800 R15: 0000000000000018
  FS:  00007f8b155cd700(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f8b155f5000 CR3: 000000012a2d7000 CR4: 00000000000006f0
  Stack:
   ffff88012fc0a3c0 ffff88012b014800 0000000000000004 0000000000000001
   ffff88012fc1b750 ffff880123853bb0 ffffffff81003d59 ffff88012b014800
   ffff88012fc0a3c0 ffff88012b014800 ffff880123853bd8 ffffffff81003e13
  Call Trace:
   [<ffffffff81003d59>] x86_pmu_stop+0x59/0xd0
   [<ffffffff81003e13>] x86_pmu_del+0x43/0x140
   [<ffffffff8111705d>] event_sched_out.isra.105+0xbd/0x260
   [<ffffffff8111738d>] __perf_remove_from_context+0x2d/0xb0
   [<ffffffff8111745d>] __perf_event_exit_context+0x4d/0x70
   [<ffffffff810c8826>] generic_exec_single+0xb6/0x140
   [<ffffffff81117410>] ? __perf_remove_from_context+0xb0/0xb0
   [<ffffffff81117410>] ? __perf_remove_from_context+0xb0/0xb0
   [<ffffffff810c898f>] smp_call_function_single+0xdf/0x140
   [<ffffffff81113d27>] perf_event_exit_cpu_context+0x87/0xc0
   [<ffffffff81113d73>] perf_reboot+0x13/0x40
   [<ffffffff8107578a>] notifier_call_chain+0x4a/0x70
   [<ffffffff81075ad7>] __blocking_notifier_call_chain+0x47/0x60
   [<ffffffff81075b06>] blocking_notifier_call_chain+0x16/0x20
   [<ffffffff81076a1d>] kernel_restart_prepare+0x1d/0x40
   [<ffffffff81076ae2>] kernel_restart+0x12/0x60
   [<ffffffff81076d56>] SYSC_reboot+0xf6/0x1b0
   [<ffffffff811a823c>] ? mntput_no_expire+0x2c/0x1b0
   [<ffffffff811a83e4>] ? mntput+0x24/0x40
   [<ffffffff811894fc>] ? __fput+0x16c/0x1e0
   [<ffffffff811895ae>] ? ____fput+0xe/0x10
   [<ffffffff81072fc3>] ? task_work_run+0x83/0xa0
   [<ffffffff81001623>] ? exit_to_usermode_loop+0x53/0xc0
   [<ffffffff8100105a>] ? trace_hardirqs_on_thunk+0x1a/0x1c
   [<ffffffff81076e6e>] SyS_reboot+0xe/0x10
   [<ffffffff814c4ba5>] entry_SYSCALL_64_fastpath+0x18/0xa3
  Code: 7c 4c 8d af c0 01 00 00 49 89 fe eb 10 48 09 c2 4c 89 e0 49 0f b1 55 00 4c 39 e0 74 35 4d 8b a6 c0 01 00 00 41 8b 8e 60 01 00 00 <0f> 33 8b 35 6e 02 8c 00 48 c1 e2 20 85 f6 7e d2 48 89 d3 89 cf
  RIP  [<ffffffff81003c92>] x86_perf_event_update+0x52/0xc0
   RSP <ffff880123853b60>
  ---[ end trace 7ec95181faf211be ]---
  note: reboot[3070] exited with preempt_count 2

Cc: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Fixes: f5967101e9de ("x86/hweight: Get rid of the special calling convention")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux into drm-next

A few fixes for amdgpu and ttm for 4.8
- fix a ttm regression caused by the new pipelining code
- fixes for mullins on amdgpu
- updated golden settings for amdgpu

* 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux:
  drm/ttm: Wait for a BO to become idle before unbinding it from GTT
  drm/amdgpu: update golden setting of polaris10
  drm/amdgpu: update golden setting of stoney
  drm/amdgpu: update golden setting of polaris11
  drm/amdgpu: update golden setting of carrizo
  drm/amdgpu: update golden setting of iceland
  drm/amd/amdgpu: change pptable output format from ASCII to binary
  drm/amdgpu/ci: add mullins to default case for smc ucode
  drm/amdgpu/gmc7: add missing mullins case

Merge tag 'drm-intel-next-fixes-2016-08-05' of git://anongit.freedesktop.org/drm-intel into drm-next

3 intel fixes.

* tag 'drm-intel-next-fixes-2016-08-05' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/fbdev: Check for the framebuffer before use
  drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB
  drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL

drm: Paper over locking inversion after registration rework

drm_connector_register_all requires a few too many locks because our
connector_list locking is busted. Add another FIXME+hack to work
around this. This should address the below lockdep splat:

======================================================
[ INFO: possible circular locking dependency detected ]
4.7.0-rc5+ #524 Tainted: G           O
-------------------------------------------------------
kworker/u8:0/6 is trying to acquire lock:
(&dev->mode_config.mutex){+.+.+.}, at: [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120

but task is already holding lock:
((fb_notifier_list).rwsem){++++.+}, at: [<ffffffff810ac195>] __blocking_notifier_call_chain+0x35/0x70

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 ((fb_notifier_list).rwsem){++++.+}:
       [<ffffffff810df611>] lock_acquire+0xb1/0x200
       [<ffffffff819a55b4>] down_write+0x44/0x80
       [<ffffffff810abf91>] blocking_notifier_chain_register+0x21/0xb0
       [<ffffffff814c7448>] fb_register_client+0x18/0x20
       [<ffffffff814c6c86>] backlight_device_register+0x136/0x260
       [<ffffffffa0127eb2>] intel_backlight_device_register+0xa2/0x160 [i915]
       [<ffffffffa00f46be>] intel_connector_register+0xe/0x10 [i915]
       [<ffffffffa0112bfb>] intel_dp_connector_register+0x1b/0x80 [i915]
       [<ffffffff8159dfea>] drm_connector_register+0x4a/0x80
       [<ffffffff8159fe44>] drm_connector_register_all+0x64/0xf0
       [<ffffffff815a2a64>] drm_modeset_register_all+0x174/0x1c0
       [<ffffffff81599b72>] drm_dev_register+0xc2/0xd0
       [<ffffffffa00621d7>] i915_driver_load+0x1547/0x2200 [i915]
       [<ffffffffa006d80f>] i915_pci_probe+0x4f/0x70 [i915]
       [<ffffffff814a2135>] local_pci_probe+0x45/0xa0
       [<ffffffff814a349b>] pci_device_probe+0xdb/0x130
       [<ffffffff815c07e3>] driver_probe_device+0x223/0x440
       [<ffffffff815c0ad5>] __driver_attach+0xd5/0x100
       [<ffffffff815be386>] bus_for_each_dev+0x66/0xa0
       [<ffffffff815c002e>] driver_attach+0x1e/0x20
       [<ffffffff815bf9be>] bus_add_driver+0x1ee/0x280
       [<ffffffff815c1810>] driver_register+0x60/0xe0
       [<ffffffff814a1a10>] __pci_register_driver+0x60/0x70
       [<ffffffffa01a905b>] i915_init+0x5b/0x62 [i915]
       [<ffffffff8100042d>] do_one_initcall+0x3d/0x150
       [<ffffffff811a935b>] do_init_module+0x5f/0x1d9
       [<ffffffff81124416>] load_module+0x20e6/0x27e0
       [<ffffffff81124d63>] SYSC_finit_module+0xc3/0xf0
       [<ffffffff81124dae>] SyS_finit_module+0xe/0x10
       [<ffffffff819a83a9>] entry_SYSCALL_64_fastpath+0x1c/0xac

-> #0 (&dev->mode_config.mutex){+.+.+.}:
       [<ffffffff810df0ac>] __lock_acquire+0x10fc/0x1260
       [<ffffffff810df611>] lock_acquire+0xb1/0x200
       [<ffffffff819a3097>] mutex_lock_nested+0x67/0x3c0
       [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120
       [<ffffffff8158f79b>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2b/0x80
       [<ffffffff8158f81d>] drm_fb_helper_set_par+0x2d/0x50
       [<ffffffffa0105f7a>] intel_fbdev_set_par+0x1a/0x60 [i915]
       [<ffffffff814c13c6>] fbcon_init+0x586/0x610
       [<ffffffff8154d16a>] visual_init+0xca/0x130
       [<ffffffff8154e611>] do_bind_con_driver+0x1c1/0x3a0
       [<ffffffff8154eaf6>] do_take_over_console+0x116/0x180
       [<ffffffff814bd3a7>] do_fbcon_takeover+0x57/0xb0
       [<ffffffff814c1e48>] fbcon_event_notify+0x658/0x750
       [<ffffffff810abcae>] notifier_call_chain+0x3e/0xb0
       [<ffffffff810ac1ad>] __blocking_notifier_call_chain+0x4d/0x70
       [<ffffffff810ac1e6>] blocking_notifier_call_chain+0x16/0x20
       [<ffffffff814c748b>] fb_notifier_call_chain+0x1b/0x20
       [<ffffffff814c86b1>] register_framebuffer+0x251/0x330
       [<ffffffff8158fa9f>] drm_fb_helper_initial_config+0x25f/0x3f0
       [<ffffffffa0106b48>] intel_fbdev_initial_config+0x18/0x30 [i915]
       [<ffffffff810adfd8>] async_run_entry_fn+0x48/0x150
       [<ffffffff810a3947>] process_one_work+0x1e7/0x750
       [<ffffffff810a3efb>] worker_thread+0x4b/0x4f0
       [<ffffffff810aad4f>] kthread+0xef/0x110
       [<ffffffff819a85ef>] ret_from_fork+0x1f/0x40

other info that might help us debug this:

Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock((fb_notifier_list).rwsem);
                               lock(&dev->mode_config.mutex);
                               lock((fb_notifier_list).rwsem);
  lock(&dev->mode_config.mutex);

*** DEADLOCK ***

6 locks held by kworker/u8:0/6:
#0:  ("events_unbound"){.+.+.+}, at: [<ffffffff810a38c9>] process_one_work+0x169/0x750
#1:  ((&entry->work)){+.+.+.}, at: [<ffffffff810a38c9>] process_one_work+0x169/0x750
#2:  (registration_lock){+.+.+.}, at: [<ffffffff814c8487>] register_framebuffer+0x27/0x330
#3:  (console_lock){+.+.+.}, at: [<ffffffff814c86ce>] register_framebuffer+0x26e/0x330
#4:  (&fb_info->lock){+.+.+.}, at: [<ffffffff814c78dd>] lock_fb_info+0x1d/0x40
#5:  ((fb_notifier_list).rwsem){++++.+}, at: [<ffffffff810ac195>] __blocking_notifier_call_chain+0x35/0x70

stack backtrace:
CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G           O    4.7.0-rc5+ #524
Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLKRVPA.X64.0138.B33.1606250842 06/25/2016
Workqueue: events_unbound async_run_entry_fn
0000000000000000 ffff8800758577f0 ffffffff814507a5 ffffffff828b9900
ffffffff828b9900 ffff880075857830 ffffffff810dc6fa ffff880075857880
ffff88007584d688 0000000000000005 0000000000000006 ffff88007584d6b0
Call Trace:
[<ffffffff814507a5>] dump_stack+0x67/0x92
[<ffffffff810dc6fa>] print_circular_bug+0x1aa/0x200
[<ffffffff810df0ac>] __lock_acquire+0x10fc/0x1260
[<ffffffff810df611>] lock_acquire+0xb1/0x200
[<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120
[<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120
[<ffffffff819a3097>] mutex_lock_nested+0x67/0x3c0
[<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120
[<ffffffff810fa85f>] ? rcu_read_lock_sched_held+0x7f/0x90
[<ffffffff81208218>] ? kmem_cache_alloc_trace+0x248/0x2b0
[<ffffffff815afdc5>] ? drm_modeset_lock_all+0x25/0x120
[<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120
[<ffffffff8158f79b>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2b/0x80
[<ffffffff8158f81d>] drm_fb_helper_set_par+0x2d/0x50
[<ffffffffa0105f7a>] intel_fbdev_set_par+0x1a/0x60 [i915]
[<ffffffff814c13c6>] fbcon_init+0x586/0x610
[<ffffffff8154d16a>] visual_init+0xca/0x130
[<ffffffff8154e611>] do_bind_con_driver+0x1c1/0x3a0
[<ffffffff8154eaf6>] do_take_over_console+0x116/0x180
[<ffffffff814bd3a7>] do_fbcon_takeover+0x57/0xb0
[<ffffffff814c1e48>] fbcon_event_notify+0x658/0x750
[<ffffffff810abcae>] notifier_call_chain+0x3e/0xb0
[<ffffffff810ac1ad>] __blocking_notifier_call_chain+0x4d/0x70
[<ffffffff810ac1e6>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff814c748b>] fb_notifier_call_chain+0x1b/0x20
[<ffffffff814c86b1>] register_framebuffer+0x251/0x330
[<ffffffff815b7e8d>] ? vga_switcheroo_client_fb_set+0x5d/0x70
[<ffffffff8158fa9f>] drm_fb_helper_initial_config+0x25f/0x3f0
[<ffffffffa0106b48>] intel_fbdev_initial_config+0x18/0x30 [i915]
[<ffffffff810adfd8>] async_run_entry_fn+0x48/0x150
[<ffffffff810a3947>] process_one_work+0x1e7/0x750
[<ffffffff810a38c9>] ? process_one_work+0x169/0x750
[<ffffffff810a3efb>] worker_thread+0x4b/0x4f0
[<ffffffff810a3eb0>] ? process_one_work+0x750/0x750
[<ffffffff810aad4f>] kthread+0xef/0x110
[<ffffffff819a85ef>] ret_from_fork+0x1f/0x40
[<ffffffff810aac60>] ? kthread_stop+0x2e0/0x2e0

v2: Rebase onto the right branch (hand-editing patches ftw) and add more
reporters.

Reported-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Jiri Kosina <jikos@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: rcar-du: Link HDMI encoder with bridge

The conversion of the rcar-du driver from the I2C slave encoder to the
DRM bridge API left the HDMI encoder's bridge pointer NULL, preventing
the bridge from being handled automatically by the DRM core. Fix it.

Fixes: 1d926114d8f4 ("drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Linux 4.8-rc1

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull more block fixes from Jens Axboe:
"As mentioned in the pull the other day, a few more fixes for this
  round, all related to the bio op changes in this series.

  Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf.  I
  wanted to do that change right after or right before -rc1, so that
  risk of conflict was reduced.  I just rebased the series on top of
  current master, and no new ->bi_rw usage has snuck in"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: rename bio bi_rw to bi_opf
  target: iblock_execute_sync_cache() should use bio_set_op_attrs()
  mm: make __swap_writepage() use bio_set_op_attrs()
  block/mm: make bdev_ops->rw_page() take a bool for read/write

Merge tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux

Pull drm zpos property support from Dave Airlie:
"This tree was waiting on some media stuff I hadn't had time to get a
  stable branchpoint off, so I just waited until it was all in your tree
  first.

  It's been around a bit on the list and shouldn't affect anything
  outside adding the generic API and moving some ARM drivers to using
  it"

* tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux:
  drm: rcar: use generic code for managing zpos plane property
  drm/exynos: use generic code for managing zpos plane property
  drm: sti: use generic zpos for plane
  drm: add generic zpos property

block: rename bio bi_rw to bi_opf

Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.

Signed-off-by: Jens Axboe <axboe@fb.com>

target: iblock_execute_sync_cache() should use bio_set_op_attrs()

The original commit missed this function, it needs to mark it a
write flush.

Cc: Mike Christie <mchristi@redhat.com>
Fixes: e742fc32fcb4 ("target: use bio op accessors")
Signed-off-by: Jens Axboe <axboe@fb.com>

mm: make __swap_writepage() use bio_set_op_attrs()

Cleaner than manipulating bio->bi_rw flags directly.

Signed-off-by: Jens Axboe <axboe@fb.com>

block/mm: make bdev_ops->rw_page() take a bool for read/write

Commit abf545484d31 changed it from an 'rw' flags type to the
newer ops based interface, but now we're effectively leaking
some bdev internals to the rest of the kernel. Since we only
care about whether it's a read or a write at that level, just
pass in a bool 'is_write' parameter instead.

Then we can also move op_is_write() and friends back under
CONFIG_BLOCK protection.

Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Merge tag 'doc-4.8-fixes' of git://git.lwn.net/linux

Pull documentation fixes from Jonathan Corbet:
"Three fixes for the docs build, including removing an annoying warning
  on 'make help' if sphinx isn't present"

* tag 'doc-4.8-fixes' of git://git.lwn.net/linux:
  DocBook: use DOCBOOKS="" to ignore DocBooks instead of IGNORE_DOCBOOKS=1
  Documenation: update cgroup's document path
  Documentation/sphinx: do not warn about missing tools in 'make help'

Merge tag 'binfmt-for-linus' of git://git./linux/kernel/git/jejb/binfmt_misc

Pull binfmt_misc update from James Bottomley:
"This update is to allow architecture emulation containers to function
  such that the emulation binary can be housed outside the container
  itself.  The container and fs parts both have acks from relevant
  experts.

  To use the new feature you have to add an F option to your binfmt_misc
  configuration"

From the docs:
"The usual behaviour of binfmt_misc is to spawn the binary lazily when
  the misc format file is invoked.  However, this doesn't work very well
  in the face of mount namespaces and changeroots, so the F mode opens
  the binary as soon as the emulation is installed and uses the opened
  image to spawn the emulator, meaning it is always available once
  installed, regardless of how the environment changes"

* tag 'binfmt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc:
  binfmt_misc: add F option description to documentation
  binfmt_misc: add persistent opened binary handler for containers
  fs: add filp_clone_open API

fs: return EPERM on immutable inode

In most cases, EPERM is returned on immutable inode, and there're only a
few places returning EACCES. I noticed this when running LTP on
overlayfs, setxattr03 failed due to unexpected EACCES on immutable
inode.

So converting all EACCES to EPERM on immutable inode.

Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus-2' of git://git./linux/kernel/git/viro/vfs

Pull more vfs updates from Al Viro:
"Assorted cleanups and fixes.

  In the "trivial API change" department - ->d_compare() losing 'parent'
  argument"

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  cachefiles: Fix race between inactivating and culling a cache object
  9p: use clone_fid()
  9p: fix braino introduced in "9p: new helper - v9fs_parent_fid()"
  vfs: make dentry_needs_remove_privs() internal
  vfs: remove file_needs_remove_privs()
  vfs: fix deadlock in file_remove_privs() on overlayfs
  get rid of 'parent' argument of ->d_compare()
  cifs, msdos, vfat, hfs+: don't bother with parent in ->d_compare()
  affs ->d_compare(): don't bother with ->d_inode
  fold _d_rehash() and __d_rehash() together
  fold dentry_rcuwalk_invalidate() into its only remaining caller

Merge tag 'xfs-rmap-for-linus-4.8-rc1' of git://git./linux/kernel/git/dgc/linux-xfs

Pull more xfs updates from Dave Chinner:
"This is the second part of the XFS updates for this merge cycle, and
  contains the new reverse block mapping feature for XFS.

  Reverse mapping allows us to track the owner of a specific block on
  disk precisely.  It is implemented as a set of btrees (one per
  allocation group) that track the owners of allocated extents.
  Effectively it is a "used space tree" that is updated when we allocate
  or free extents.  i.e. it is coherent with the free space btrees we
  already maintain and never overlaps with them.

  This reverse mapping infrastructure is the building block of several
  upcoming features - reflink, copy-on-write data, dedupe, online
  metadata and data scrubbing, highly accurate bad sector/data loss
  reporting to users, and significantly improved reconstruction of
  damaged and corrupted filesystems.  There's a lot of new stuff coming
  along in the next couple of cycles,a nd it all builds in the rmap
  infrastructure.

  As such, it's a huge chunk of new code with new on-disk format
  features and internal infrastructure.  It warns at mount time as an
  experimental feature and that it may eat data (as we do with all new
  on-disk features until they stabilise).  We have not released
  userspace suport for it yet - userspace support currently requires
  download from Darrick's xfsprogs repo and build from source, so the
  access to this feature is really developer/tester only at this point.
  Initial userspace support will be released at the same time kernel
  with this code in it is released.

  The new rmap enabled code regresses 3 xfstests - all are ENOSPC
  related corner cases, one of which Darrick posted a fix for a few
  hours ago.  The other two are fixed by infrastructure that is part of
  the upcoming reflink patchset.  This new ENOSPC infrastructure
  requires a on-disk format tweak required to keep mount times in
  check - we need to keep an on-disk count of allocated rmapbt blocks so
  we don't have to scan the entire btrees at mount time to count them.

  This is currently being tested and will be part of the fixes sent in
  the next week or two so users will not be exposed to this change"

* tag 'xfs-rmap-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (52 commits)
  xfs: move (and rename) the deferred bmap-free tracepoints
  xfs: collapse single use static functions
  xfs: remove unnecessary parentheses from log redo item recovery functions
  xfs: remove the extents array from the rmap update done log item
  xfs: in btree_lshift, only allocate temporary cursor when needed
  xfs: remove unnecesary lshift/rshift key initialization
  xfs: remove the get*keys and update_keys btree ops pointers
  xfs: enable the rmap btree functionality
  xfs: don't update rmapbt when fixing agfl
  xfs: disable XFS_IOC_SWAPEXT when rmap btree is enabled
  xfs: add rmap btree block detection to log recovery
  xfs: add rmap btree geometry feature flag
  xfs: propagate bmap updates to rmapbt
  xfs: enable the xfs_defer mechanism to process rmaps to update
  xfs: log rmap intent items
  xfs: create rmap update intent log items
  xfs: add rmap btree insert and delete helpers
  xfs: convert unwritten status of reverse mappings
  xfs: remove an extent from the rmap btree
  xfs: add an extent to the rmap btree
  ...

Merge branch 'work.const-qstr' of git://git./linux/kernel/git/viro/vfs

Pull qstr constification updates from Al Viro:
"Fairly self-contained bunch - surprising lot of places passes struct
  qstr * as an argument when const struct qstr * would suffice; it
  complicates analysis for no good reason.

  I'd prefer to feed that separately from the assorted fixes (those are
  in #for-linus and with somewhat trickier topology)"

* 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  qstr: constify instances in adfs
  qstr: constify instances in lustre
  qstr: constify instances in f2fs
  qstr: constify instances in ext2
  qstr: constify instances in vfat
  qstr: constify instances in procfs
  qstr: constify instances in fuse
  qstr constify instances in fs/dcache.c
  qstr: constify instances in nfs
  qstr: constify instances in ocfs2
  qstr: constify instances in autofs4
  qstr: constify instances in hfs
  qstr: constify instances in hfsplus
  qstr: constify instances in logfs
  qstr: constify dentry_init_security

Merge tag 'media/v4.8-6' of git://git./linux/kernel/git/mchehab/linux-media

Pull mailcap fixlets from Mauro Carvalho Chehab:
"A small fixup for my and Shuah's entries in .mailcap.

  Basically, those entries were with a syntax that makes
  get_maintainer.pl to do the wrong thing"

* tag 'media/v4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  .mailmap: Correct entries for Mauro Carvalho Chehab and Shuah Khan

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio/vhost updates from Michael Tsirkin:

- new vsock device support in host and guest

- platform IOMMU support in host and guest, including compatibility
   quirks for legacy systems.

- misc fixes and cleanups.

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  VSOCK: Use kvfree()
  vhost: split out vringh Kconfig
  vhost: detect 32 bit integer wrap around
  vhost: new device IOTLB API
  vhost: drop vringh dependency
  vhost: convert pre sorted vhost memory array to interval tree
  vhost: introduce vhost memory accessors
  VSOCK: Add Makefile and Kconfig
  VSOCK: Introduce vhost_vsock.ko
  VSOCK: Introduce virtio_transport.ko
  VSOCK: Introduce virtio_vsock_common.ko
  VSOCK: defer sock removal to transports
  VSOCK: transport-specific vsock_transport functions
  vhost: drop vringh dependency
  vop: pull in vhost Kconfig
  virtio: new feature to detect IOMMU device quirk
  balloon: check the number of available pages in leak balloon
  vhost: lockless enqueuing
  vhost: simplify work flushing

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull more KVM updates from Paolo Bonzini:
- ARM bugfix and MSI injection support
- x86 nested virt tweak and OOPS fix
- Simplify pvclock code (vdso bits acked by Andy Lutomirski).

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  nvmx: mark ept single context invalidation as supported
  nvmx: remove comment about missing nested vpid support
  KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=off
  KVM: documentation: fix KVM_CAP_X2APIC_API information
  x86: vdso: use __pvclock_read_cycles
  pvclock: introduce seqcount-like API
  arm64: KVM: Set cpsr before spsr on fault injection
  KVM: arm: vgic-irqfd: Workaround changing kvm_set_routing_entry prototype
  KVM: arm/arm64: Enable MSI routing
  KVM: arm/arm64: Enable irqchip routing
  KVM: Move kvm_setup_default/empty_irq_routing declaration in arch specific header
  KVM: irqchip: Convey devid to kvm_set_msi
  KVM: Add devid in kvm_kernel_irq_routing_entry
  KVM: api: Pass the devid in the msi routing entry

Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
"This is the main pull request for MIPS for 4.8.  Also includes is a
  minor SSB cleanup as SSB code traditionally is merged through the MIPS
  tree:

  ATH25:
    - MIPS: Add default configuration for ath25

  Boot:
    - For zboot, copy appended dtb to the end of the kernel
    - store the appended dtb address in a variable

  BPF:
    - Fix off by one error in offset allocation

  Cobalt code:
    - Fix typos

  Core code:
    - debugfs_create_file returns NULL on error, so don't use IS_ERR for
      testing for errors.
    - Fix double locking issue in RM7000 S-cache code.  This would only
      affect RM7000 ARC systems on reboot.
    - Fix page table corruption on THP permission changes.
    - Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels.
      David says, there are no compatibility issues raised by this fix.
    - Move some signal code around.
    - Rewrite r4k count/compare clockevent device registration such that
      min_delta_ticks/max_delta_ticks files are guaranteed to be
      initialized.
    - Only register r4k count/compare as clockevent device if we can
      assume the clock to be constant.
    - Fix MSA asm warnings in control reg accessors
    - uasm and tlbex fixes and tweaking.
    - Print segment physical address when EU=1.
    - Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO.
    - CP: Allow booting by VP other than VP 0
    - Cache handling fixes and optimizations for r4k class caches
    - Add hotplug support for R6 processors
    - Cleanup hotplug bits in kconfig
    - traps: return correct si code for accessing nonmapped addresses
    - Remove cpu_has_safe_index_cacheops

  Lantiq:
    - Register IRQ handler for virtual IRQ number
    - Fix EIU interrupt loading code
    - Use the real EXIN count
    - Fix build error.

  Loongson 3:
    - Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES

  Octeon:
    - Delete built-in DTB pruning code for D-Link DSR-1000N.
    - Clean up GPIO definitions in dlink_dsr-1000n.dts.
    - Add more LEDs to the DSR-100n DTS
    - Fix off by one in octeon_irq_gpio_map()
    - Typo fixes
    - Enable SATA by default in cavium_octeon_defconfig
    - Support readq/writeq()
    - Remove forced mappings of USB interrupts.
    - Ensure DMA descriptors are always in the low 4GB
    - Improve USB reset code for OCTEON II.

  Pistachio:
    - Add maintainers entry for pistachio SoC Support
    - Remove plat_setup_iocoherency

  Ralink:
    - Fix pwm UART in spis group pinmux.

  SSB:
    - Change bare unsigned to unsigned int to suit coding style

  Tools:
    - Fix reloc tool compiler warnings.

  Other:
    - Delete use of ARCH_WANT_OPTIONAL_GPIOLIB"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits)
  MIPS: mm: Fix definition of R6 cache instruction
  MIPS: tools: Fix relocs tool compiler warnings
  MIPS: Cobalt: Fix typo
  MIPS: Octeon: Fix typo
  MIPS: Lantiq: Fix build failure
  MIPS: Use CPHYSADDR to implement mips32 __pa
  MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds.
  MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts.
  MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N.
  MIPS: store the appended dtb address in a variable
  MIPS: ZBOOT: copy appended dtb to the end of the kernel
  MIPS: ralink: fix spis group pinmux
  MIPS: Factor o32 specific code into signal_o32.c
  MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present
  MIPS: Use per-mm page to execute branch delay slot instructions
  MIPS: Modify error handling
  MIPS: c-r4k: Use SMP calls for CM indexed cache ops
  MIPS: c-r4k: Avoid small flush_icache_range SMP calls
  MIPS: c-r4k: Local flush_icache_range cache op override
  MIPS: c-r4k: Split r4k_flush_kernel_vmap_range()
  ...

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf updates from Ingo Molnar:
"Mostly tooling fixes and some late tooling updates, plus two perf
  related printk message fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tests bpf: Use SyS_epoll_wait alias
  perf tests: objdump output can contain multi byte chunks
  perf record: Add --sample-cpu option
  perf hists: Introduce output_resort_cb method
  perf tools: Move config/Makefile into Makefile.config
  perf tests: Add test for bitmap_scnprintf function
  tools lib: Add bitmap_and function
  tools lib: Add bitmap_scnprintf function
  tools lib: Add bitmap_alloc function
  tools lib traceevent: Ignore generated library files
  perf tools: Fix build failure on perl script context
  perf/core: Change log level for duration warning to KERN_INFO
  perf annotate: Plug filename string leak
  perf annotate: Introduce strerror for handling symbol__disassemble() errors
  perf annotate: Rename symbol__annotate() to symbol__disassemble()
  perf/x86: Modify error message in virtualized environment
  perf target: str_error_r() always returns the buffer it receives
  perf annotate: Use pipe + fork instead of popen
  perf evsel: Introduce constructor for cycles event

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"Two fixes and a cleanup-fix, to the syscall entry code and to ptrace"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/syscalls/64: Add compat_sys_keyctl for 32-bit userspace
  x86/ptrace: Stop setting TS_COMPAT in ptrace code
  x86/vdso: Error out if the vDSO isn't a valid DSO

Merge tag 'sh-for-4.8' of git://git.libc.org/linux-sh

Pull arch/sh updates from Rich Felker:
"These changes improve device tree support (including builtin DTB), add
  support for the J-Core J2 processor, an open source synthesizable
  reimplementation of the SH-2 ISA, resolve a longstanding sigcontext
  ABI mismatch issue, and fix various bugs including nommu-specific
  issues and minor regressions introduced in 4.6.

  The J-Core arch support is included here but to be usable it needs
  drivers that are waiting on approval/inclusion from their subsystem
  maintainers"

* tag 'sh-for-4.8' of git://git.libc.org/linux-sh: (23 commits)
  sh: add device tree source for J2 FPGA on Mimas v2 board
  sh: add defconfig for J-Core J2
  sh: use common clock framework with device tree boards
  sh: system call wire up
  sh: Delete unnecessary checks before the function call "mempool_destroy"
  sh: do not perform IPI-based cache flush except on boards that need it
  sh: add SMP support for J2
  sh: SMP support for SH2 entry.S
  sh: add working futex atomic ops on userspace addresses for smp
  sh: add J2 atomics using the cas.l instruction
  sh: add AT_HWCAP flag for J-Core cas.l instruction
  sh: add support for J-Core J2 processor
  sh: fix build regression with CONFIG_OF && !CONFIG_OF_FLATTREE
  sh: allow clocksource drivers to register sched_clock backends
  sh: make heartbeat driver explicitly non-modular
  sh: make board-secureedge5410 explicitly non-modular
  sh: make mm/asids-debugfs explicitly non-modular
  sh: make time.c explicitly non-modular
  sh: fix futex/robust_list on nommu models
  sh: disable aliased page logic on NOMMU models
  ...

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:

- fix HugeTLB leak due to CoW and PTE_RDONLY mismatch

- avoid accessing unmapped FDT fields when checking validity

- correctly account for vDSO AUX entry in ARCH_DLINFO

- fix kallsyms with absolute expressions in linker script

- kill unnecessary symbol-based relocs in vmlinux

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix copy-on-write referencing in HugeTLB
  arm64: mm: avoid fdt_check_header() before the FDT is fully mapped
  arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
  arm64: relocatable: suppress R_AARCH64_ABS64 relocations in vmlinux
  arm64: vmlinux.lds: make __rela_offset and __dynsym_offset ABSOLUTE

Merge tag 'pwm/for-4.8-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
"This set of changes improve some aspects of the atomic API as well as
  make use of this new API in the regulator framework to allow properly
  dealing with critical regulators controlled by a PWM.

  Aside from that there's a bunch of updates and cleanups for existing
  drivers, as well as the addition of new drivers for the Broadcom
  iProc, STMPE and ChromeOS EC controllers"

* tag 'pwm/for-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
  regulator: pwm: Document pwm-dutycycle-unit and pwm-dutycycle-range
  regulator: pwm: Support extra continuous mode cases
  pwm: Add ChromeOS EC PWM driver
  dt-bindings: pwm: Add binding for ChromeOS EC PWM
  mfd: cros_ec: Add EC_PWM function definitions
  mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper
  pwm: atmel: Use of_device_get_match_data()
  pwm: atmel: Fix checkpatch warnings
  pwm: atmel: Fix disabling of PWM channels
  dt-bindings: pwm: Add R-Car H3 device tree bindings
  pwm: rcar: Use ARCH_RENESAS
  pwm: tegra: Add support for Tegra186
  dt-bindings: pwm: tegra: Add compatible string for Tegra186
  pwm: tegra: Avoid overflow when calculating duty cycle
  pwm: tegra: Allow 100 % duty cycle
  pwm: tegra: Add support for reset control
  pwm: tegra: Rename mmio_base to regs
  pwm: tegra: Remove useless padding
  pwm: tegra: Drop NUM_PWM macro
  pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value
  ...

Merge tag 'ntb-4.8' of git://github.com/jonmason/ntb

Pull NTB updates from Jon Mason:
"NTB bug fixes for the ntb_tool and ntb_perf, and improvements to the
  ntb_perf and ntb_pingpong for increased debugability.

  Also, modification to the ntb_transport layer to increase/decrease
  the number of transport entries depending on the ring size"

* tag 'ntb-4.8' of git://github.com/jonmason/ntb:
  NTB: ntb_hw_intel: use local variable pdev
  NTB: ntb_hw_intel: show BAR size in debugfs info
  ntb_test: Add a selftest script for the NTB subsystem
  ntb_perf: clear link_is_up flag when the link goes down.
  ntb_pingpong: Add a debugfs file to get the ping count
  ntb_tool: Add link status and files to debugfs
  ntb_tool: Postpone memory window initialization for the user
  ntb_perf: Wait for link before running test
  ntb_perf: Return results by reading the run file
  ntb_perf: Improve thread handling to increase robustness
  ntb_perf: Schedule based on time not on performance
  ntb_transport: Check the number of spads the hardware supports
  ntb_tool: Add memory window debug support
  ntb_perf: Allow limiting the size of the memory windows
  NTB: allocate number transport entries depending on size of ring size
  ntb_tool: BUG: Ensure the buffer size is large enough to return all spads
  ntb_tool: Fix infinite loop bug when writing spad/peer_spad file

Merge tag 'pstore-v4.8-rc1' of git://git./linux/kernel/git/kees/linux

Pull pstore fixes from Kees Cook:
"Fixes for pstore ramoops driver to catch bad kfree() and to use better
  DT bindings"

* tag 'pstore-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  ramoops: use persistent_ram_free() instead of kfree() for freeing prz
  ramoops: use DT reserved-memory bindings

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"This is seven basic fixes (plus one MAINTAINER update) which came in
  close to the merge window"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  ipr: Fix error return code in ipr_probe_ioa()
  fcoe: add missing destroy_workqueue() on error in fcoe_init()
  lpfc: Fix possible NULL pointer dereference
  fcoe: Use default VLAN for FIP VLAN discovery
  ipr: Wait to do async scan until scsi host is initialized
  MAINTAINERS: Update cxlflash maintainers
  cxlflash: Verify problem state area is mapped before notifying shutdown
  lpfc: fix oops in lpfc_sli4_scmd_to_wqidx_distr() from lpfc_send_taskmgmt()

Merge tag 'dm-4.8-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

- a stable dm-flakey fix to error read IO during the 'down_interval'

- a DM core suspend fix to establish the SUSPENDED flag before dropping
   the SUSPENDING flag

- a blk-mq request-based DM (dm-mq) dm_stop_queue() fix to properly
   stop the blk-mq hw_queues (and cancel pending requeue work); also
   set/clear QUEUE_FLAG_STOPPED when stopping/starting the dm-mq
   request_queue.

- a DM multipath fix to harden locking of in-core state flags in the
   face of concurrent access while handling path failures under heavy
   IO.

- a few small DM raid fixes to edge cases caught with further testing.

* tag 'dm-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm raid: fix use of wrong status char during resynchronization
  dm raid: constructor fails on non-zero incompat_features
  dm raid: fix processing of max_recovery_rate constructor flag
  dm: set DMF_SUSPENDED* _before_ clearing DMF_NOFLUSH_SUSPENDING
  dm rq: fix the starting and stopping of blk-mq queues
  dm mpath: add locking to multipath_resume and must_push_back
  dm flakey: error READ bios during the down_interval

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"Here's the second round of block updates for this merge window.

  It's a mix of fixes for changes that went in previously in this round,
  and fixes in general.  This pull request contains:

   - Fixes for loop from Christoph

   - A bdi vs gendisk lifetime fix from Dan, worth two cookies.

   - A blk-mq timeout fix, when on frozen queues.  From Gabriel.

   - Writeback fix from Jan, ensuring that __writeback_single_inode()
     does the right thing.

   - Fix for bio->bi_rw usage in f2fs from me.

   - Error path deadlock fix in blk-mq sysfs registration from me.

   - Floppy O_ACCMODE fix from Jiri.

   - Fix to the new bio op methods from Mike.

     One more followup will be coming here, ensuring that we don't
     propagate the block types outside of block.  That, and a rename of
     bio->bi_rw is coming right after -rc1 is cut.

   - Various little fixes"

* 'for-linus' of git://git.kernel.dk/linux-block:
  mm/block: convert rw_page users to bio op use
  loop: make do_req_filebacked more robust
  loop: don't try to use AIO for discards
  blk-mq: fix deadlock in blk_mq_register_disk() error path
  Include: blkdev: Removed duplicate 'struct request;' declaration.
  Fixup direct bi_rw modifiers
  block: fix bdi vs gendisk lifetime mismatch
  blk-mq: Allow timeouts to run while queue is freezing
  nbd: fix race in ioctl
  block: fix use-after-free in seq file
  f2fs: drop bio->bi_rw manual assignment
  block: add missing group association in bio-cloning functions
  blkcg: kill unused field nr_undestroyed_grps
  writeback: Write dirty times for WB_SYNC_ALL writeback
  floppy: fix open(O_ACCMODE) for ioctl-only open

Merge tag 'pnp-extra-4.8-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull PNP fix from Rafael Wysocki:
"This fixes build errors due to a missing header file inclusion in
drivers/pnp/pnpbios/core.c (Randy Dunlap)"

* tag 'pnp-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PNP: pnpbios: add header file to fix build errors

Merge tag 'acpi-extra-4.8-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
"Two more fixes in ACPI drivers, one in the ACPI EC driver
  (stable-candidate) and one in the ACPI button driver.

  Specifics:

   - An ACPI EC driver fix from the 4.3 cycle may cause the ACPICA's
     method reentrancy limit to be exceeded for a _Qxx method due to a
     large number of concurrent EC operations, so prevent that from
     happening by moving the EC handling into a separate workqueue with
     a limit on the number of concurrently executed work items (Lv
     Zheng)

   - Fix the cleanup code in the ACPI button driver that forgets to
     clear two variables on exit which causes an error to occur on the
     next attmpt to load the driver (Benjamin Tissoires)"

* tag 'acpi-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / EC: Work around method reentrancy limit in ACPICA for _Qxx
  ACPI / button: remove pointer to old lid_sysfs on unbind

Merge tag 'pm-extra-4.8-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
"A few more fixes and cleanups in the x86-64 low-level hibernation
  code, PM core, cpufreq (Kconfig and intel_pstate), and the operating
  points framework.

  Specifics:

   - Prevent the low-level assembly hibernate code on x86-64 from
     referring to __PAGE_OFFSET directly as a symbol which doesn't work
     when the kernel identity mapping base is randomized, in which case
     __PAGE_OFFSET is a variable (Rafael Wysocki).

   - Avoid selecting CPU_FREQ_STAT by default as the statistics are not
     required for proper cpufreq operation (Borislav Petkov).

   - Add Skylake-X and Broadwell-X IDs to the intel_pstate's list of
     processors where out-of-band (OBB) control of P-states is possible
     and if that is in use, intel_pstate should not attempt to manage
     P-states (Srinivas Pandruvada).

   - Drop some unnecessary checks from the wakeup IRQ handling code in
     the PM core (Markus Elfring).

   - Reduce the number operating performance point (OPP) lookups in one
     of the OPP framework's helper functions (Jisheng Zhang)"

* tag 'pm-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  x86/power/64: Do not refer to __PAGE_OFFSET from assembly code
  cpufreq: Do not default-yes CPU_FREQ_STAT
  cpufreq: intel_pstate: Add more out-of-band IDs
  PM / OPP: optimize dev_pm_opp_set_rate() performance a bit
  PM-wakeup: Delete unnecessary checks before three function calls

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull more input updates from Dmitry Torokhov:
"Two new drivers for touchscreen controllers:

   - Silead touchscreen controllers
   - SiS 9200 family touchscreen controllers

  and a few driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: silead - remove some dead code
  Input: sis-i2c - select CONFIG_CRC_ITU_T
  Input: add driver for SiS 9200 family I2C touchscreen controllers
  Input: ili210x - fix permissions on "calibrate" attribute
  Input: elan_i2c - properly wake up touchpad on ASUS laptops
  Input: add driver for Silead touchscreens
  Input: elantech - fix debug dump of the current packet
  Input: rotary_encoder - support binary encoding of states
  Input: xpad - power off wireless 360 controllers on suspend
  Input: i8042 - break load dependency between atkbd/psmouse and i8042
  Input: synaptics-rmi4 - do not check for NULL when calling of_node_put()
  Input: cros_ec_keyb - cleanup use of dev

Merge tag 'usb-4.8-rc1' of git://git./linux/kernel/git/gregkh/usb

Pull more USB updates from Greg KH:
"Here are a few more straggler patches for USB for 4.8-rc1.

  Most of these are for the usb-serial driver tree.  All of those have
  been in linux-next for a long time, but missed my previous pull
  request to you.

  The remaining change is to fix up a staging tree build error, due to
  some USB gadget driver changes that went in.  I put it in this tree as
  it was for a USB driver and people are reporting the build error on
  your tree.

  All of these have been in linux-next for this week, and longer for the
  usb-serial changes"

* tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  staging: emxx_udc: allow modular build
  USB: serial: use variable for status
  USB: serial: option: add support for Telit LE910 PID 0x1206
  USB: serial: cp210x: use kmemdup
  USB: serial: ti_usb_3410_5052: use functions rather than macros
  USB: serial: ti_usb_3410_5052: remove ti_usb_3410_5052.h
  USB: serial: ti_usb_3410_5052: use __packed
  USB: serial: ti_usb_3410_5052: remove useless comments

Merge branch 'integration-4.8' of git://git./linux/kernel/git/fdmanana/linux into for-linus-4.8

ramoops: use persistent_ram_free() instead of kfree() for freeing prz

persistent_ram_zone(=prz) structures are allocated by persistent_ram_new(),
which includes vmap() or ioremap(). But they are currently freed by
kfree(). This uses persistent_ram_free() for correct this asymmetry usage.

Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.kw@hitachi.com>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Seiji Aguchi <seiji.aguchi.tr@hitachi.com>
Signed-off-by: Kees Cook <keescook@chromium.org>

ramoops: use DT reserved-memory bindings

Instead of a ramoops-specific node, use a child node of /reserved-memory.
This requires that of_platform_device_create() be explicitly called
for the node, though, since "/reserved-memory" does not have its own
"compatible" property.

Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>

drm/ttm: Wait for a BO to become idle before unbinding it from GTT

Fixes hangs under memory pressure, e.g. running the piglit test
tex3d-maxsize concurrently with other tests.

Fixes: 17d33bc9d6ef ("drm/ttm: drop waiting for idle in ttm_bo_evict.")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

NTB: ntb_hw_intel: use local variable pdev

Clean up duplicated expression by replacing it with the equivalent local
variable pdev.

Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

NTB: ntb_hw_intel: show BAR size in debugfs info

It will be useful to know the hardware configured BAR size to diagnose
issues with NTB memory windows.

Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

ntb_test: Add a selftest script for the NTB subsystem

This script automates testing doorbells, scratchpads and memory windows
for an NTB device. It can be run locally, with the NTB looped
back to the same host or use SSH to remotely control the second host.

In the single host case, the script just needs to be passed two
arguments: a PCI ID for each side of the link. In the two host case
the -r option must be used to specify the remote hostname (which must
be SSH accessible and should probably have ssh-keys exchanged).

A sample run looks like this:

$ sudo ./ntb_test.sh 0000:03:00.1 0000:83:00.1 -p 29
Starting ntb_tool tests...
Running link tests on: 0000:03:00.1 / 0000:83:00.1
  Passed
Running link tests on: 0000:83:00.1 / 0000:03:00.1
  Passed
Running db tests on: 0000:03:00.1 / 0000:83:00.1
  Passed
Running db tests on: 0000:83:00.1 / 0000:03:00.1
  Passed
Running spad tests on: 0000:03:00.1 / 0000:83:00.1
  Passed
Running spad tests on: 0000:83:00.1 / 0000:03:00.1
  Passed
Running mw0 tests on: 0000:03:00.1 / 0000:83:00.1
  Passed
Running mw0 tests on: 0000:83:00.1 / 0000:03:00.1
  Passed
Running mw1 tests on: 0000:03:00.1 / 0000:83:00.1
  Passed
Running mw1 tests on: 0000:83:00.1 / 0000:03:00.1
  Passed

Starting ntb_pingpong tests...
Running ping pong tests on: 0000:03:00.1 / 0000:83:00.1
  Passed

Starting ntb_perf tests...
Running local perf test without DMA
  0: copied 536870912 bytes in 164453 usecs, 3264 MBytes/s
  Passed
Running remote perf test without DMA
  0: copied 536870912 bytes in 164453 usecs, 3264 MBytes/s
  Passed

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Allen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

ntb_perf: clear link_is_up flag when the link goes down.

When the link goes down, the link_is_up flag did not return to
false. This could have caused some subtle corner case bugs
when the link goes up and down quickly.

Once that was fixed, there was found to be a race if the link was
brought down then immediately up. The link_cleanup work would
occasionally be scheduled after the next link up event. This would
cancel the link_work that was supposed to occur and leave ntb_perf
in an unusable state.

To fix this we get rid of the link_cleanup work and put the actions
directly in the link_down event.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

ntb_pingpong: Add a debugfs file to get the ping count

This commit adds a debugfs 'count' file to ntb_pingpong. This is so
testing with ntb_pingpong can be automated beyond just checking the
logs for pong messages.

The count file returns a number which increments every pong. The
counter can be cleared by writing a zero.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

ntb_tool: Add link status and files to debugfs

In order to more successfully script with ntb_tool it's useful to
have a link file to check the link status so that the script
doesn't use the other files until the link is up.

This commit adds a 'link' file to the debugfs directory which reads
boolean (Y or N) depending on the link status. Writing to the file
change the link state using ntb_link_enable or ntb_link_disable.

A 'link_event' file is also provided so an application can block until
the link changes to the desired state. If the user writes a 1, it will
block until the link is up. If the user writes a 0, it will block until
the link is down.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>