drm/connector: Allow creation of margin props alone

TV margins properties can only be added as part of the SDTV TV
connector properties creation, but we might need those props for HDMI
TVs too, so let's move the margins props creation in a separate
function and expose it to drivers.

We also add an helper to attach margins props to a connector.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-4-boris.brezillon@bootlin.com

drm/connector: Clarify the unit of TV margins

All margins are expressed in pixels. Clarify that in the doc.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-3-boris.brezillon@bootlin.com

drm/connector: Fix drm_mode_create_tv_properties() doc

The in the kernel-doc header did not match the function name.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-2-boris.brezillon@bootlin.com

drm: dw-hdmi-i2s: convert to SPDX identifiers

This patch updates license to use SPDX-License-Identifier
instead of verbose license text.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lg4n1izg.wl-kuninori.morimoto.gx@renesas.com

MAINTAINERS: drm: Remove myself as drm-bridge maintainer

I have moved on to other stuff for now. Haven't been able to make time
to review bridge related work. Andrzej has been doing it by himself
for a while now.

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913075300.22510-1-architt@codeaurora.org

drm/vkms: set preferred depth to 24

Otherwise DRM_CAP_DUMB_PREFERRED_DEPTH is zero.

Signed-off-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/o2SmEP0M6h287Fs5OeL3HtQzTr8uV0PyOhFict_qdxeS7vFvV1Zr8qzRUJh-YnCoJHo13nJgAqqQByzEzTZTqk9R2ExsOszYLj68hQLqBIc=@emersion.fr

drm/ati_pcigart: Fix error code in drm_ati_pcigart_init()

The drm_ati_pcigart_init() function was originally suppose to return one
on success and zero on failure, but these days it returns a mix of
zero, one and -ENOMEM on failure.

This patch cleans it up and modifies the caller so now the function
returns zero on success and negative error codes on failure.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217070344.GC12159@kadam

drm: Fix an error pointer dereference()

The drm_mode_create_tile_group() is only called from
drm_parse_tiled_block() and the caller expects it to return a NULL on
error.  In other words, this function should match
drm_mode_get_tile_group().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217065733.GA12159@kadam

drm/dp_mst: Refactor drm_dp_update_payload_part1()

This:

- Adds local variables in the first loop, instead of using array indices
  everywhere
- Adds an early continue to reduce the indent level in the second loop

There should be no functional changes here

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181214012604.13746-3-lyude@redhat.com

drm/dp_mst: Remove bogus conditional in drm_dp_update_payload_part1()

There's no reason we need this, it's just confusing looking.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Juston Li <juston.li@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181214012604.13746-2-lyude@redhat.com

drm/virtio: switch to generic fbdev emulation

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181213134915.24722-1-kraxel@redhat.com

drm: Remove complete task from TODO documentation

This patch remove the follow complete task from TODO documentation:

  drm_mode_config.crtc_idr is misnamed, since it contains all KMS object.
  Should be renamed to drm_mode_config.object_idr.

Signed-off-by: Shayenne da Luz Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213225537.nq4dwidn6tma33iv@smtp.gmail.com

drm/dp_mst: Fix memory leak in drm_dp_mst_topology_mgr_destroy()

We need to call drm_dp_mst_topology_mgr_set_mst(mgr, false) when
destroying the topology manager in order to ensure that the root mstb
and all of it's descendents are actually destroyed, and additionally to
try to make sure that we leave the hub in a clean state.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181211235026.21758-1-lyude@redhat.com

drm: Rename crtc_idr as object_idr to KMS cleanups

This patch solves this TODO task:
 drm_mode_config.crtc_idr is misnamed, since it contains all KMS object.
 Should be renamed to drm_mode_config.object_idr.

Signed-off-by: Shayenne da Luz Moura <shayenneluzmoura@gmail.com>
[danvet: resolve conflict with addition of privobj_list.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213212957.vkitkyl5cj2qh7qr@smtp.gmail.com

drm/rockchip: Add implicit fencing support for planes

Render like lima will attach a fence to the framebuffer dma_buf,
so the display driver should wait for it to finish before showing
the framebufferto prevent tearing.

Generally tested on rk3188, rk3288, rk3328 and rk3399 and
together with an actual lima-based kmscube on rk3188 and rk3328.

Suggested-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130102449.6430-1-heiko@sntech.de

drm/xen: Don't set the dpms hook

Doesn't do anything for atomic.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: xen-devel@lists.xen.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181210100359.22507-7-daniel.vetter@ffwll.ch

drm/qxl: Don't set the dpms hook

Doesn't do anything with atomic.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: spice-devel@lists.freedesktop.org
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181210100359.22507-6-daniel.vetter@ffwll.ch

drm/syncobj: remove drm_syncobj_cb and cleanup

This completes "drm/syncobj: Drop add/remove_callback from driver
interface" and cleans up the implementation a bit.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/266255/

drm/etnaviv: fix for 64bit seqno change

The fence seqno is now 64bit, fixes build warning.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/267136/

drm/atomic: integrate modeset lock with private objects

Follow the same pattern of locking as with other state objects. This
avoids boilerplate in the driver.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022123122.30468-1-boris.brezillon@bootlin.com

drm/dp/mst: Validate REMOTE_I2C_READ harder

Make sure i2c msgs we're asked to transfer conform to the
requirements of REMOTE_I2C_READ. We were only checking that the
last message is a read, but we must also check that the preceding
messages are all writes. Also check that the length of each
message isn't too long.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-2-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers

We aren't supposed to force a stop+start between every i2c msg
when performing multi message transfers. This should eg. cause
the DDC segment address to be reset back to 0 between writing
the segment address and reading the actual EDID extension block.

To quote the E-DDC spec:
"... this standard requires that the segment pointer be
 reset to 00h when a NO ACK or a STOP condition is received."

Since we're going to touch this might as well consult the
I2C_M_STOP flag to determine whether we want to force the stop
or not.

Cc: Brian Vincent <brainn@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=108081
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

drm/ast: Remove set but not used variable 'bo'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/ast/ast_fb.c: In function 'astfb_create':
drivers/gpu/drm/ast/ast_fb.c:194:17: warning:
 variable 'bo' set but not used [-Wunused-but-set-variable]

It never used since introduction in commit 312fec1405dd ("drm: Initial KMS
driver for AST (ASpeed Technologies) 2000 series (v2)")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1544258185-50430-1-git-send-email-yuehaibing@huawei.com

drm/dp-mst-helper: Remove hotplug callback

When everyone implements it exactly the same way, among all 4
implementations, there's not really a need to overwrite this at all.

Aside: drm_kms_helper_hotplug_event is pretty much core functionality
at this point. Probably should move it there.

Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128221234.15054-1-daniel.vetter@ffwll.ch

drm/vc4: Add support for X/Y reflection

Add support for X/Y reflection when the plane is using linear or
T-tiled formats. X/Y reflection hasn't been tested on SAND formats, so
we reject them until proper testing/debugging has been done.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207083606.15449-2-boris.brezillon@bootlin.com

drm/vc4: Fix negative X/Y positioning on SAND planes

Commit 3e407417b192 ("drm/vc4: Fix X/Y positioning of planes using
T_TILES modifier") fixed the problem with T_TILES format, but left
things in a non-working state for SAND formats. Address that now.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207083606.15449-1-boris.brezillon@bootlin.com

drm/v3d: Invalidate the caches from the outside in.

This would be a fairly obscure race, but let's make sure we don't ever
lose it.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-6-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>

drm/v3d: Stop trying to flush L2C on V3D 3.3+

This cache was replaced with the slice accessing the L2T in the newer
generations.  Noted by Dave during review.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-5-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>

drm/v3d: Drop the wait for L2T flush to complete.

According to Dave, once you've started an L2T flush, all L2T accesses
will be blocked until the flush completes.  This fixes a consistent
3-4ms stall between the ioctl and running the job, and 3DMMES Taiji
goes from 27fps to 110fps.

v2: Leave a note about why we don't need to wait for completion.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Reviewed-by: Dave Emett <david.emett@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-4-eric@anholt.net

drm/v3d: Don't bother flushing L1TD at job start.

This is the write combiner for TMU writes.  You're supposed to flush
that at job end if you had dirtied any cachelines.  Flushing it at job
start then doesn't make any sense.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Reviewed-by: Dave Emett <david.emett@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-3-eric@anholt.net

drm/v3d: Drop unused v3d_flush_caches().

Now that I've specified how the end-of-pipeline flushing should work,
we're never going to use this function.

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Emett <david.emett@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-2-eric@anholt.net

drm/v3d: Document cache flushing ABI.

Right now, userspace doesn't do any L2T writes, but we should lay out
our expectations for how it works.

v2: Explicitly mention the VCD cache flushing requirements and that
    we'll flush the other caches before each of the CLs.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-1-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>

drm/i915: Compile fix for 64b dma-fence seqno

Many errs of the form:
drivers/gpu/drm/i915/selftests/intel_hangcheck.c: In function ‘__igt_reset_evict_vma’:
./include/linux/kern_levels.h:5:18: error: format ‘%x’ expects argument of type ‘unsigned int’, but argum

Fixes: b312d8ca3a7c ("dma-buf: make fence sequence numbers 64 bit v2")
Cc: Christian König <christian.koenig@amd.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207123428.16257-1-mika.kuoppala@linux.intel.com

dma-buf: make fence sequence numbers 64 bit v2

For a lot of use cases we need 64bit sequence numbers. Currently drivers
overload the dma_fence structure to store the additional bits.

Stop doing that and make the sequence number in the dma_fence always
64bit.

For compatibility with hardware which can do only 32bit sequences the
comparisons in __dma_fence_is_later only takes the lower 32bits as significant
when the upper 32bits are all zero.

v2: change the logic in __dma_fence_is_later

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/266927/

drm/qxl: add spice-devel list to MAINTAINERS

So qxl kernel patches are sent to the spice-devel list for review.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20181121090129.23506-1-kraxel@redhat.com

drm/v3d: fix broken build

I missed one case during the recent revert of the replace_fence
interface change.

Fixes: 0b258ed1a219 drm: revert "expand replace_fence to support timeline point v2"
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/266134/

drm: revert "expand replace_fence to support timeline point v2"

This reverts commit 9a09a42369a4a37a959c051d8e1a1f948c1529a4.

The whole interface isn't thought through. Since this function can't
fail we actually can't allocate an object to store the sync point.

Sorry, I should have taken the lead on this from the very beginning and
reviewed it more thoughtfully. Going to propose a new interface as a
follow up change.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/265580/

drm/tinydrm: Use kmemdup rather than duplicating its implementation in repaper_spi_transfer()

use kmemdup rather than duplicating its implementation

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1543471233-159568-1-git-send-email-yuehaibing@huawei.com

drm/vkms: Remove set but not used variable 'vkms_obj'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/vkms/vkms_plane.c: In function 'vkms_prepare_fb':
drivers/gpu/drm/vkms/vkms_plane.c:144:26: warning:
 variable 'vkms_obj' set but not used [-Wunused-but-set-variable]

It never used since introduction in commit
8ce1bb0b5337 ("drm/vkms: map/unmap buffers in [prepare/cleanup]_fb hooks")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1543634444-186448-1-git-send-email-yuehaibing@huawei.com

drm/sun4i: Add compatible for H6 display engine

H6 is first Allwinner SoC which supports 10 bit colors, HDR and AFBC.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-9-jernej.skrabec@siol.net

drm/v3d: Add more tracepoints for V3D GPU rendering.

The core scheduler tells us when the job is pushed to the scheduler's
queue, and I had the job_run functions saying when they actually queue
the job to the hardware.  By adding tracepoints for the very top of
the ioctls and the IRQs signaling job completion, "perf record -a -e
v3d:.\* -e gpu_scheduler:.\* <job>; perf script" gets you a pretty
decent timeline.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181201005759.28093-5-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>

drm/v3d: Add missing fence timeline name for TFU.

We shouldn't be returning v3d-render for our new queue.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 83d5139982db ("drm/v3d: Add support for submitting jobs to the TFU.")
Link: https://patchwork.freedesktop.org/patch/msgid/20181201005759.28093-6-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>

drm/syncobj: use dma_fence_get_stub

Extract of useful code from the timeline work. Let's use just a single
stub fence instance instead of allocating a new one all the time.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/265248/

dma-buf: add dma_fence_get_stub

Extract of useful code from the timeline work. This provides a function
to return a stub or dummy fence which is always signaled.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/265248/

drm/panel: simple: Add AUO G101EVN010 panel support

The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD
panel.

Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[treding@nvidia.com: sort new entry alphabetically]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1540480173-12009-2-git-send-email-alex.gonzalez@digi.com

drm/meson: Fix an Alpha Primary Plane bug on Meson GXL/GXM SoCs

On the Amlogic GXL & GXM SoCs, a bug occurs on the primary plane when
alpha is used where the alpha is not aligned with the pixel content.

The workaround Amlogic implemented is to reset the OSD1 plane hardware
block each time the plane is (re)enabled, solving the issue.

In the reset, we still need to save the content of 2 registers which
depends on the status of the plane, in addition to reload the scaler
conversion matrix at the same time.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com>
[narmstrong: fixed typo in commit log]
Link: https://patchwork.freedesktop.org/patch/msgid/20181128100734.6536-1-narmstrong@baylibre.com

drm/v3d: Fix prime imports of buffers from other drivers.

v3d_bo_get_pages() checks this to decide to map the imported buffer
instead of the backing shmem file.  The caller was about to set this
value anyway, and there's no error path in between.  Ideally we
wouldn't even allocate the shmem file for our imports, but that's a
more invasive fix.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Link: https://patchwork.freedesktop.org/patch/msgid/20181128230927.10951-3-eric@anholt.net
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dave Emett <david.emett@broadcom.com>

drm/v3d: Drop the "dev" argument to lock/unlock of BO reservations.

They were unused, as Dave Emett noticed in TFU review.

Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: Dave Emett <david.emett@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128230927.10951-2-eric@anholt.net
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/v3d: Add support for submitting jobs to the TFU.

The TFU can copy from raster, UIF, and SAND input images to UIF output
images, with optional mipmap generation.  This will certainly be
useful for media EGL image input, but is also useful immediately for
mipmap generation without bogging the V3D core down.

For now we only run the queue 1 job deep, and don't have any hang
recovery (though I don't think we should need it, with TFU).  Queuing
multiple jobs in the HW will require synchronizing the YUV coefficient
regs updates since they don't get FIFOed with the job.

v2: Change the ioctl to IOW instead of IOWR, always set COEF0, explain
    why TFU is AUTH, clarify the syncing docs, drop the unused TFU
    interrupt regs (you're expected to use the hub's), don't take
    &bo->base for NULL bos.
v3: Fix a little whitespace alignment (noticed by checkpatch), rebase
    on drm_sched_job_cleanup() changes.

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Emett <david.emett@broadcom.com> (v2)
Link: https://patchwork.freedesktop.org/patch/264607/

drm: Fix up drm_atomic_state_helper.[hc] extraction

I've misplaced two functions by accident:
- drm_atomic_helper_duplicate_state is really part of the
  resume/suspend/shutdown device-wide helpers.
- drm_atomic_helper_legacy_gamma_set is part of the legacy ioctl
  compat helpers.

Move them both back.

Fixes: 9ef8a9dc4b21 ("drm: Extract drm_atomic_state_helper.[hc]")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128100728.4674-1-daniel.vetter@ffwll.ch

drm: Fix compiler warning in drm_atomic_helper.c

Kbuild was complaining about:
>> drivers/gpu/drm/drm_atomic_helper.c:3169:27: warning: 'state' may be used uninitialized in this function [-Wmaybe-uninitialized]

Now state can't actually be used uninitialized, but we'll assign a value
anyways so it stops bellyaching.

Kbuild config:
link: https://lists.01.org/pipermail/kbuild-all/2018-November/055374.html
tree:   git://anongit.freedesktop.org/drm/drm-misc for-linux-next
head:   b7ea04d299c78b6cf96ab281a1683ff62a74f969
commit: b7ea04d299c78b6cf96ab281a1683ff62a74f969 [4/4] drm: Add
DRM_MODESET_LOCK_BEGIN/END helpers
config: x86_64-randconfig-x017-201847 (attached as .config)
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
reproduce:
git checkout b7ea04d299c78b6cf96ab281a1683ff62a74f969
# save the attached .config to linux build tree
make ARCH=x86_64

Fixes: b7ea04d299c7 ("drm: Add DRM_MODESET_LOCK_BEGIN/END helpers")
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[seanpaul added extra details on airlied's suggestion]
Link: https://patchwork.freedesktop.org/patch/msgid/20181129203652.223634-1-sean@poorly.run

Merge drm/drm-next into drm-misc-next

Need to pick up the following patch to fix htmldocs build

167bfe534dc2 ("Documentation: drm: Remove dangling pointer from drm-mm.rst")

Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm/vc4: Allow YUV formats on cursor planes

Now that scaling is allowed on cursor planes, we can also allow YUV
formats.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-6-boris.brezillon@bootlin.com

drm/vc4: Allow scaling on cursor plane

Now that async update has been reworked to allow scaled planes to be
updated asynchronously when the scaling params do not change, we can
remove the NO_SCALING constraint on cursor planes.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-5-boris.brezillon@bootlin.com

drm/vc4: Rework the async update logic

vc4_plane_atomic_async_check() was only based on the
state->{crtc,src}_{w,h} which was fine since scaling was not allowed on
the cursor plane.

We are about to change that to properly support underscan, and, in order
to make the async check more reliable, we call vc4_plane_mode_set()
from there and check that only the pos0, pos2 and ptr0 entries in the
dlist have changed.

In vc4_plane_atomic_async_update(), we no longer call
vc4_plane_atomic_check() since vc4_plane_mode_set() has already been
called in vc4_plane_atomic_async_check(), and we don't need to allocate
a new LBM region (we reuse the one from the current state).

Note that we now have to manually update each field of the current
plane state since it's no longer updated in place (not sure we have
to sync all of them, but it's harmless if we do).
We also drop the vc4_plane_async_set_fb() call (ptr0 dlist entry has
been properly updated in vc4_plane_mode_set())

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-4-boris.brezillon@bootlin.com

drm/vc4: Don't check plane state more than once

We are about to use vc4_plane_mode_set() in the async check path, but
async check can decide that async update is not possible and force the
driver to fallback to a sync update.

All the checks that have been done on the plane state during async check
stay valid, and checking it again is not necessary. Add a ->checked
field to vc4_plane_state, and use it to track the status of the state
(checked or not).

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-3-boris.brezillon@bootlin.com

drm/vc4: Move LBM creation out of vc4_plane_mode_set()

We are about to use vc4_plane_mode_set() in the async check path, and
async updates require that LBM size stay the same since they reuse the
LBM from the previous state. So we definitely don't want to allocate a
new LBM region that we know for sure will be free right away.

Move the LBM allocation out of vc4_plane_mode_set() and call the new
function (vc4_plane_update_lbm()) from vc4_plane_atomic_check().

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-2-boris.brezillon@bootlin.com

drm/vc4: Make vc4_lbm_size() return 0 when vertical scaling is disabled

LBM is not needed when vertical scaling is disabled. Return 0 in this
case to avoid allocating LBM memory that will anyway be unused.

While at it, drop the test on ->is_unity which is now redundant.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-1-boris.brezillon@bootlin.com

Documentation: drm: Remove dangling pointer from drm-mm.rst

Fixes htmldocs build error:
Error: Cannot open file ../drivers/gpu/drm/drm_global.c

Fixes: 2bb42410b1bd ("drm: Remove drm_global.{c,h} v2")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129155522.33749-1-sean@poorly.run

drm: TODO: Add DRM_MODESET_LOCK_ALL* conversion to todo.rst

We should also get the drivers using the helpers. Seems like a good
intermediate TODO item.

Changes in v2:
- Add line about replacing drm_modest_lock_all() (Daniel)

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129195838.222031-1-sean@poorly.run

drm: Add DRM_MODESET_LOCK_BEGIN/END helpers

This patch adds a couple of helpers to remove the boilerplate involved
in grabbing all of the modeset locks.

I've also converted the obvious cases in drm core to use the helpers.

The only remaining instance of drm_modeset_lock_all_ctx() is in
drm_framebuffer. It's complicated by the state clear that occurs on
deadlock. ATM, there's no way to inject code in the deadlock path with
the helpers, so it's unfit for conversion.

Changes in v2:
- Relocate ret argument to the end of the list (Daniel)
- Incorporate Daniel's doc suggestions (Daniel)

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129150423.239081-4-sean@poorly.run

drm: Move atomic_state_put after locks are dropped

drm_atomic_state_put doesn't require any locking, and this makes things
easier for switching to modeset_lock_all helpers in a future patch

Changes in v2:
- Moved state->acquire_ctx clear to a separate patch (Daniel)

Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129150423.239081-3-sean@poorly.run

drm: Move drm_mode_setcrtc() local re-init to failure path

Instead of always re-initializing the variables we need to clean up on
out, move the re-initialization into the branch that goes back to retry
label.

This is a lateral move right now, but will allow us to pull out the
modeset locking into common code. I kept this change separate to make
things easier to review.

Changes in v2:
- None

Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129150423.239081-2-sean@poorly.run

drm: Clear state->acquire_ctx before leaving drm_atomic_helper_commit_duplicated_state()

drm_atomic_helper_commit_duplicated_state() sets state->acquire_ctx to
the context given in the argument and leaves it in state after it
quits. The lifetime of state and context are not guaranteed to be the
same, so we shouldn't leave that pointer hanging around. This patch
resets the context to NULL to avoid any oopses.

Changes in v2:
- Added to the set

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129150423.239081-1-sean@poorly.run

drm/rcar-du: Use drm_fbdev_generic_setup()

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

drm_fbdev_generic_setup() handles mode_config.num_connector being zero.
In that case it retries fbdev setup on the next .output_poll_changed.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128212713.43500-4-noralf@tronnes.org

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

Requested by Boris Brezillon for some vc4 fixes that are needed for future vc4 work.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/virtio: virtio_gpu_cmd_resource_create_3d: drop unused fence arg

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181128151021.29565-3-kraxel@redhat.com

drm/virtio: fence: pass plain pointer

Since commit "9fdd90c0f4 drm/virtio: add virtio_gpu_alloc_fence()"
fences are not allocated any more by virtio_gpu_fence_emit().  So there
is no need to pass down a reference to the fence pointer, a plain
pointer is enough now.

Convert virtio_gpu_fence_emit() and callers.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181128151021.29565-2-kraxel@redhat.com

drm/vkms: Fix plane duplicate_state

We need to handle allocation failures and bail out. While at it, tune
the allocation failures down to debug level.

syzbot injected an allocation failure and then hit this WARN_ON.

Reported-by: syzbot+eb6e5365f23c02517dda@syzkaller.appspotmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128101033.4840-1-daniel.vetter@ffwll.ch

Merge v4.20-rc4 into drm-next

Requested by Boris Brezillon for some vc4 fixes that are needed for future vc4 work.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-misc-next-2018-11-28' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v4.21:

Core Changes:
- Merge drm_info.c into drm_debugfs.c
- Complete the fake drm_crtc_commit's hw_done/flip_done sooner.
- Remove deprecated drm_obj_ref/unref functions. All drivers use get/put now.
- Decrease stack use of drm_gem_prime_mmap.
- Improve documentation for dumb callbacks.

Driver Changes:
- Add edid support to virtio.
- Wait on implicit fence in meson and sun4i.
- Add support for BGRX8888 to sun4i.
- Preparation patches for sun4i driver to start supporting linear and tiled YUV formats.
- Add support for HDMI 1.4 4k modes to meson, and support for VIC alternate timings.
- Drop custom dumb_map in vkms.
- Small fixes and cleanups to v3d.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/151a3270-b1be-ed75-bd58-6b29d741f592@linux.intel.com

Merge tag 'du-next-20181123' of git://linuxtv.org/pinchartl/media into drm-next

R-Car DU changes for v4.21:

- R8A7744 and R8A77470 support
- R8A77965 LVDS support
- Miscellaneous fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3165107.GPE8tO0qUE@avalon

Merge tag 'drm-intel-next-2018-11-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Changes outside i915:
- Connector property to limit max bpc (Radhakrishna)
- Fix LPE audio runtime PM and deinit (Ville)
- DP FEC prep work (Anusha)
- Mark pinned shmemfs pages as unevictable (Kuo-Hsin)
- Backmerge drm-next (Jani)

Inside i915:
- Revert OA UAPI change that lacks userspace (Joonas)
- Register macro cleanup (Jani)
- 32-bit build fixes on pin flags (Chris)
- Fix MG DP mode and PHY gating for HDMI (Imre)
- DP MST race, hpd and irq fixes (Lyude)
- Combo PHY fixes and cleanup (Imre, Lucas)
- Move display init and cleanup under modeset init and cleanup (José)
- PSR fixes (José)
- Subslice size fixes (Daniele)
- Abstract and clean up fixed point helpers (Jani)
- Plane input CSC for YUV to RGB conversion (Uma)
- Break long iterations for get/put shmemfs pages (Chris)
- Improve DDI encoder hw state readout sanity checks (Imre)
- Fix power well leaks for MST (José)
- Scaler fixes (Ville)
- Watermark fixes (Ville)
- Fix VLV/CHV DSI panel orientation readout (Ville)
- ICL rawclock fixes (Paulo)
- Workaround DMC power well request issues (Imre)
- Plane allocation fix (Maarten)
- Transcoder enum value/ordering robustness fixes (Imre)
- UTS_RELEASE build dependency fix (Hans Holmberg)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87k1l4cesj.fsf@intel.com

drm/pl111: add of_node_put()

of_find_node_by_path() acquires a reference to the node returned by it
and that reference needs to be dropped by its caller.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121131723.22431-1-tiny.windzz@gmail.com

drm/vkms: Drop custom vkms_dumb_map().

This is the same as the default drm_gem_dumb_map_offset()
implementation, except that this one missed the ban on userspace
mapping an imported dmabuf (which seems like intended common behavior
for drivers).

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181126215929.20546-1-eric@anholt.net
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/v3d: Clean up the reservation object setup.

The extra to_v3d_bo() calls came from copying this from the vc4
driver, which stored the cma gem object in the structs.

v2: Fix an unused var warning

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108161654.19888-4-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> (v1)

drm/v3d: Update a comment about what uses v3d_job_dependency().

I merged bin and render's paths in a late refactoring.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108161654.19888-3-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

drm/v3d: Fix whitespace inconsistency in the header.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108161654.19888-2-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

drm/meson: Add support for VIC alternate timings

This change is an attempt to handle the alternate clock for the CEA mode.
60Hz vs. 59.94Hz, 30Hz vs 29.97Hz or 24Hz vs 23.97Hz on the Amlogic Meson SoC
DRM Driver pixel clock generation.

The actual clock generation will be moved to the Common Clock framework once
all the video clock are handled by the Amlogic Meson SoC clock driver,
then these alternate timings will be handled in the same time in a cleaner
fashion.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com>
[narmstrong: fix maybe-uninitialized warnings after applying]
Link: https://patchwork.freedesktop.org/patch/msgid/1541501675-3928-1-git-send-email-narmstrong@baylibre.com

drm/meson: Add HDMI 1.4 4k modes

Add the timings for the HDMI 1.4 4K modes support :
- 3840x2160@30
- 3840x2160@25
- 3840x2160@24

Since the 297000Hz pixel clock is already managed and the modes are
compatible with the HDMI 1.4 current HDMI PHY+Controller support, only
the missing timings values needs to be added.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1541496909-19625-1-git-send-email-narmstrong@baylibre.com

drm: Improve dumb callback docs

Noticed while reviewing a patch from Eric. Also add a todo for the
dumb_map_offset callbacks (it should be simple to do, but piles of
work). Plus fix up vbox, because vbox.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Nicholas Mc Guire <der.herr@hofr.at>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Fabio Rafael da Rosa <fdr@pid42.net>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181127091921.8325-1-daniel.vetter@ffwll.ch

drm/sun4i: Pass modifier to backend and frontend format support helpers

To prepare the introduction of tiled mode support, pass the framebuffer
format modifier to the helpers dealing with format support.

Since only linear mode is supported for now, add corresponding checks in
each helper.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-33-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Add support for the BGRX8888 output format

This introduces support for the BGRX8888 output format for the frontend,
with its associated output format value definition.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-23-paul.kocialkowski@bootlin.com

drm/sun4i: Make pitch even for GEM dumb alloc as per hardware constraint

Our hardware requires the pitch to be an even number when using YUV
formats with the frontend. Implement a driver-specific callback for GEM
dumb allocation that sets the pitch accordingly.

Since only the bpp is passed (and not the format), we cannot really
distinguish if this alignment is really required. Since it doesn't hurt
to align the pitch anyway, always do it.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-30-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Apply format sub-sampling to CH1 dimensions

The frontend comes with two "channels", that can be configured
independently. When used in YUV mode, the first channel (CH0) represents
the luminance component while the second channel (CH1) represents the
chrominance. In RGB mode, both have to be configured the same way.

Use variables (with the YUV terminology) for each channel's
dimensions, calculating the chroma dimensions from the luma dimensions
and the sub-sampling factors from the format description.

Since the configured size only has pixel precision, the fractional
fixed-point part of the source size is dropped for both components to
ensure that the scaling factors are accurate.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-26-paul.kocialkowski@bootlin.com

drm/sun4i: backend: Detail the YUV to RGB values coding explanation

The values in the BT601 YUV to RGB colorspace translation are not
simply coded as multiples, but rather as fixed-point signed fractional
values on a given number of bits. Add an explanation about that.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-24-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Add support for the BGRX8888 input format

This introduces support for the BGRX8888 input format for the frontend,
with its associated pixel sequence value definition. Other fields are
already configured correctly as they no longer depend on the format's
fourcc directly.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-22-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Determine input mode based on the number of planes

Use the number of planes associated with the DRM format to determine the
input mode configuration instead of the format iteself. This way, the
helper can be used for all packed formats without future changes.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-20-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Add proper definitions for format registers

This introduces proper definitions for the input and output format
configuration registers instead of a macro and raw values in the code,
with the intent to increase code readability and reduce indirections.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-19-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Add helpers for input data mode and pixel sequence

This introduces new helpers for retrieving the input data mode and pixel
sequence register field values based on the DRM format instead of
hardcoding these. This makes it easier to add support for more formats.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-18-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Move CSC bypass setup to format update routine

In order to support YUV to RGB conversion with the frontend (which is
generally used for connecting with the backend), the CSC block must not
be bypassed.

As a result, the bit to enable CSC bypass is moved from the runtime
resume routine to the format update routine, so that it can disabled
when introducing support for YUV formats later.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-17-paul.kocialkowski@bootlin.com

drm/sun4i: Rename sun4i_backend_layer_formats to sun4i_layer_formats

Since more formats can be supported by the frontend, rename the
variable listing the layer formats to avoid suggesting that the backend
itself supports all the listed formats.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-16-paul.kocialkowski@bootlin.com

drm/sun4i: backend: Avoid counting YUV planes that use the frontend

Our hardware has a limited number of YUV planes (usually 1) that can be
supported using the backend only. However, YUV planes can also be
supported by the frontend and must then not be counted when checking for
that limitation.

Only count the YUV plane when the frontend is not used.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-15-paul.kocialkowski@bootlin.com

drm/sun4i: backend: Use a specific function to check if a plane is supported

Before this patch, it is assumed that a plane is supported either
through the frontend or through the backend alone. However, the DRM
interface does not allow finely reporting our hardware capabilities
and there are cases where neither are support.

In particular, some plane formats are supported by the backend and not
the frontend, so they can only be supported without scaling.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-8-paul.kocialkowski@bootlin.com

drm/sun4i: backend: Refine the logic behind using the frontend

Checking that scaling is in use is not sufficient as a condition to
decide to use the frontend.

Since not all layer formats are supported by the frontend, we need to
check for that support first. Then, the frontend must only be enabled
if the backend doesn't support the format or that scaling is required.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-7-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Add a helper and a list for supported formats

In order to check whether the frontend supports a specific format, an
explicit list and a related helper are introduced.

Just like in the backend, the prototype of the helper is added to the
frontend header so that it can be used later on. The helper is also
exported because it will be used outside of the frontend module.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-6-paul.kocialkowski@bootlin.com

drm/sun4i: backend: Add a helper and a list for supported formats

In order to check whether the backend supports a specific format, an
explicit list and a related helper are introduced.

The prototype of this helper is added to the header so that it can be
called from sun4i_layer later (when introducing tiled mode support).

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-5-paul.kocialkowski@bootlin.com

drm/sun4i: Add TODO comment about supporting scaling with the backend

The backend allows integer-only scaling but can handle alpha components,
unlike the frontend. It could be useful to add support for this
eventually, so add a short TODO comment describing the situation.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-4-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Replace ARGB with XRGB as supported format

The frontend documentation (for the A33) mentions that ARGB is supported
as output, but with the alpha component always set to 0xff. In practice,
this means that the alpha component cannot be preserved when going
through the frontend. Since the information is lost, ARGB is not
properly supported.

As a result, expose the matching format supported by the frontend (both
for input and output) as XRGB instead of ARGB.

Since ARGB was the selected format for connecting the frontend to the
backend, change it to XRGB to reflect this as well.

The A31 and A80 SoCs apparently have a bit to enable proper alpha,
but this is not supported at this point (see the comment already in the
code).

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-3-paul.kocialkowski@bootlin.com

drm/sun4i: Cleanup video/YUV source before enabling a layer

This adds a dedicated function for cleaning the video and YUV source
channel layer enable bits. This function is called first on layer atomic
update to make sure that there are no leftover bits from previous
plane configuration that were not cleaned until now.

It fixes issues when alternating between video and YUV planes, where
both bits would be set eventually, leading to broken plane display.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-2-paul.kocialkowski@bootlin.com