PCI: quirk: enable MSI Mapping on HT1000

Add a quirk to enable the MSI mapping capability on HyperTransport bridges.

Wire Broadcom's HT1000 to use the quirk.

Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Currid <acurrid@nvidia.com>
Cc: Peer Chen <pchen@nvidia.com>
Cc: Prakash Punnoor <prakash@punnoor.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michael Chan <mchan@broadcom.com>
Cc: Greg KH <greg@kroah.com>
Cc: Andy Currid <acurrid@nvidia.com>
Cc: Peer Chen <pchen@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: Fix warning in setup-res.c on 32-bit platforms with 64-bit resources

This adds appropriate casts to avoid a warning and print the correct
values in pr_debug.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: Fix bus resource assignment on 32 bits with 64b resources

The current pci_assign_unassigned_resources() code doesn't work properly
on 32 bits platforms with 64 bits resources. The main reason is the use
of unsigned long in various places instead of resource_size_t.

This is a pre-requisite for making powerpc use the generic code instead of
its own half-useful implementation.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI Hotplug: PCIeHP: Fix some whitespace damage

PCIeHP: Fix some whitespace damage

Signed-off-by: Rolf Eike Beer <eike-hotplug@sf-tec.de>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI Hotplug: pciehp: use generic function to find ext capability

Remove duplicated code to find an extend capability in PCIEHP driver.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI Hotplug: pciehp: remove needless hp_slot calculation

Remove needless hp_slot calculation. This has no functional changes.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI Hotplug: pciehp: remove needless members from struct controller

Remove needless members from struct controller. This has no functional
changes.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI Hotplug: acpiphp: remove unneeded acpi_get_name function call

acpi_get_name() is called before and after dbg(). The latter is
useless and should be removed.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI Hotplug: acpiphp: fix trivial typos

fix trivial typos.

Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCIe: fix double initialization bug

Earlier patches to split out the hardware init for PCIe hotplug resulted in
some one-time initializations being redone on every resume cycle.  Eg.
irq/polling initialization.

This patch splits the hardware init into two parts, and separates the
one-time initializations from those so that they only ever get done once,
as intended.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCIE: Make use of the previously split out pcie_init_enable_events() function

Make use of the previously split out pcie_init_enable_events() function
to reinitialize the hotplug hardware on resume from suspend, but only
when pciehp_force==1.  Otherwise behaviour is unmodified.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: more fixes for PCIe Hotplug so that it works with ExpressCard slots on Dell notebooks (and others?) in conjunction with modparam of pciehp_force=1

Split out the hotplug hardware initialization code from pcie_init()
into pcie_init_enable_events(), without changing any functionality.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCIE: fix PCIe Hotplug so that it works with ExpressCard slots on Dell notebooks (and others?) in conjunction with modparam of pciehp_force=1.

Fix pciehp_probe() to deal with ExpressCard cards
that were inserted prior to the driver being loaded.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: Add missing "space" in printk messages

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: export pci_restore_msi_state()

PCI error recovery usually involves the PCI adapter being reset.
If the device is using MSI, the reset will cause the MSI state
to be lost; the device driver needs to restore the MSI state.

The pci_restore_msi_state() routine is currently protected
by CONFIG_PM; remove this, and also export the symbol, so
that it can be used in a modle.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

pci hotplug: fix rpaphp directory naming

Fix presentation of the slot number in the /sys/bus/pci/slots
directory to match that used in the majority of other drivers.

> Greg said:
> How is anyone supposed to write sane managability tools in the
> presence
> of such anarchy?
>
> > ~ # cat /sys/bus/pci/slots/0000:00:02.2/phy_location
> > U787A.001.DNZ00Z5-P1-C2
>
> Right.  This should look like:
>
> # cat /sys/bus/pci/slots/U787A.001.DNZ00Z5-P1-C2/address
> 0000:00:02

This patch implements exactly what you describe. Boot tested.
I assume you really mean it -- if so, then please review and
ack the patch !?

I have absolutely no clue if this breaks any existing IBM tools.
I'm pretty sure it doesn't ... but attention Mike Strosaker! does it?

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: <strosake@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: Unhide the SMBus on the HP xw4100

Unhide the SMBus on the HP xw4100. This gives access to a hardware
monitoring chip (ADT7463) and to the memory module SPD EEPROMs. I
checked that ACPI wasn't accessing the SMBus, so it should be safe.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: More Sanity checks for DMAR

Add and changes a few sanity checks in dmar.c.

1.  The haw field in ACPI DMAR table in VT-d spec doesn't describe the
   range of haw.  But since DMA page size is 4KB in DMA remapping, haw
   should be at least 4KB.  The current VT-d code in dmar.c returns failure
   when haw==0.  This sanity check is not accurate and execution can pass
   when haw is less than one page size 4KB.  This patch changes the haw
   sanity check to validate if haw is less than 4KB.

2. Add dmar_rmrr_units verification.

3. Add parse_dmar_table() verification.

[akpm@linux-foundation.org: coding-style fixes]

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: mark gross <mgross@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: drivers/pci/quirks.c: coding-style cleanup

Remove lots of space-before-) instances.  Perhaps these were a workaround for
problems in some long-dead cpp version.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: remove additional pci_scan_child_bus() prototype

There's already a prototype for pci_scan_child_bus() at the correct place in
pci.h, so there's no reason for an additional one.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: always export pci_scan_single_device

This patch fixes the following build error with CONFIG_HOTPLUG=n:

  MODPOST 2137 modules
ERROR: "pci_scan_single_device" [drivers/edac/i82875p_edac.ko] undefined!

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: remove unneeded lock_kernel() in drivers/pci/syscall.c.

sys_pciconfig_{read,write}() are protected against PCI removal with the
reference count in struct pci_dev.  The concurrency of
pci_user_{read,write}_config_* functions are already protected by pci_lock
in drivers/pci/access.c.

Signed-off-by: Diego Woitasen <diego@woitasen.com.ar>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: get rid of pci_dev::{vendor,device}_compatible fields

The vendor_compatible and device_compatible fields in struct pci_dev aren't
used anywhere, and are somewhat pointless.  Assuming that these are
historical artifacts, remove them.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: Mem Policy: fix mempolicy usage in pci driver

In an attempt to ensure memory allocation from the local node, the pci
driver temporarily replaces the current task's memory policy with the
system default policy.  Trying to be a good citizen, the driver then call's
mpol_get() on the new policy.  When it's finished probing, it undoes the
'_get by calling mpol_free() [on the system default policy] and then
restores the current task's saved mempolicy.

A couple of issues here:

1) it's never necessary to set a task's mempolicy to the
   system default policy in order to get system default
   allocation behavior.  Simply set the current task's
   mempolicy to NULL and allocations will fall back to
   system default policy.

2) we should never [need to] call mpol_free() on the system
   default policy.  [I plan on trapping this with a VM_BUG_ON()
   in a subsequent patch.]

This patch removes the calls to mpol_get() and mpol_free()
and uses NULL for the temporary task mempolicy to effect
default allocation behavior.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: VIA CX700 quirk to disable PCI Bus Parking

PCI Bus Parking and PCI Master read caching on the VIA CX700 is buggy and
can lead to problems such as USB2.0 packet loss if a VT6212L controller
is on the PCI bus. It's disabled by default, but some BIOSes turn these
features on and this patch reverts the configuration to the safe defaults.

Signed-off-by: Tim Yamin <tim.yamin@zonbu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: quirk_vialatency: Omit reading pci revision ID

Don't read the revision ID unnecessary since the PCI subsystem
fills this field in already.

Updated to fix a thinko bug in a previously sent patch.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: hotplug: Link fakephp last

Currently, fakephp will claim all devices; we really only want it
to claim those not in slots.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: hotplug: pci_hotplug_core whitespace fix

Remove superfluous space.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: hotplug: acpiphp: Remove unused variable from acpiphp

Remove unused variable from acpiphp.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: hotplug: remove Experimental

Remove EXPERIMENTAL from PCI Hot Plug.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: hotplug: Switch to pci_get_bus_and_slot

Thank you so much for your check & advise.
This time, I've tried on ibmphp_core.c, is it OK?

Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

pcie: utilize pcie transaction pending bit

PCIE has a mechanism to wait for Non-Posted request to complete. I think
pci_disable_device is a good place to do this.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

pcie port driver: correctly detect native PME feature

Native PME is capability of root port or root complex event collector.
It's not determined by PCI PME capability.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: drivers/pci/: remove unused exports

This patch removes the following unused exports:
- remove the following unused EXPORT_SYMBOL's:
 - pci-acpi.c: pci_osc_support_set
 - proc.c: pci_proc_detach_bus
- remove the following unused EXPORT_SYMBOL_GPL's:
  - bus.c: pci_walk_bus
  - probe.c: pci_create_bus
  - setup-res.c: pci_claim_resource

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: drivers/pci/rom.c: #if 0 two functions

This patch #if 0's the following unused global functions:
- rom.c: pci_map_rom_copy()
- rom.c: pci_remove_rom()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: make pci_restore_bars() static

This patch makes the needlessly global pci_restore_bars() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: kill swap_io_context()
  as-iosched: fix inconsistent ioc->lock context
  ide-cd: fix leftover data BUG
  block: make elevator lib checkpatch compliant
  cfq-iosched: make checkpatch compliant
  block: make core bits checkpatch compliant
  block: new end request handling interface should take unsigned byte counts
  unexport add_disk_randomness
  block/sunvdc.c:print_version() must be __devinit
  splice: always updated atime in direct splice

block: kill swap_io_context()

It blindly copies everything in the io_context, including the lock.
That doesn't work so well for either lock ordering or lockdep.

There seems zero point in swapping io contexts on a request to request
merge, so the best point of action is to just remove it.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

docbook: rapidio: fix fatal filename error

Fix docbook fatal error (files were renamed):
docproc: linux-2.6.24-git9/arch/ppc/kernel/rio.c: No such file or directory

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix directory entry in arch-x86-Makefile

Doing a make randconfig I came across this error in the Makefile.

This patch makes a directory out of arch/x86/mach-default for
CONFIG_X86_RDC321X

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix inconsistent .section usage in lib/
  [SPARC/SPARC64]: Fix usage of .section .sched.text in assembler code.

Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (173 commits)
  [NETNS]: Lookup in FIB semantic hashes taking into account the namespace.
  [NETNS]: Add a namespace mark to fib_info.
  [IPV4]: fib_sync_down rework.
  [NETNS]: Process interface address manipulation routines in the namespace.
  [IPV4]: Small style cleanup of the error path in rtm_to_ifaddr.
  [IPV4]: Fix memory leak on error path during FIB initialization.
  [NETFILTER]: Ipv6-related xt_hashlimit compilation fix.
  [NET_SCHED]: Add flow classifier
  [NET_SCHED]: sch_sfq: make internal queues visible as classes
  [NET_SCHED]: sch_sfq: add support for external classifiers
  [NET_SCHED]: Constify struct tcf_ext_map
  [BLUETOOTH]: Fix bugs in previous conn add/del workqueue changes.
  [TCP]: Unexport sysctl_tcp_tso_win_divisor
  [IPV4]: Make struct ipv4_devconf static.
  [TR] net/802/tr.c: sysctl_tr_rif_timeout static
  [XFRM]: Fix statistics.
  [XFRM]: Remove unused exports.
  [PKT_SCHED] sch_teql.c: Duplicate IFF_BROADCAST in FMASK, remove 2nd.
  [BNX2]: Fix ASYM PAUSE advertisement for remote PHY.
  [IPV4] route cache: Introduce rt_genid for smooth cache invalidation
  ...

pasemi: Fix thinko in dma_direct_ops setup

[POWERPC] pasemi: Fix thinko in dma_direct_ops setup

The first patch will just fall through and still set dma_data to a bad
value, make it return directly instead.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: remove dead timer int pending code

Remove all the dead timer interrupt checking functions for the ColdFire
CPU "timers" hardware that are not used after switching to GENERIC_TIME.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: remove empty timer offset function for 68360

Switching to GENERIC_TIME means we no longer need the empty timer offset
function for the 68360 CPU.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: remove local gettimeofday code

Remove unused local gettimeofday functions, now that we are using
GENERIC_TIME.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: set config to use GENERIC_TIME

Switch m68knommu arch to using GENERIC_TIME.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: switch ColdFire TIMER to use GENERIC_TIME

Switch the ColdFire TIMER timer to use GENERIC_TIME.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: switch ColdFire PIT timer to use GENERIC_TIME

Switch the ColdFire PIT timer to using GENERIC_TIME.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: switch 68328 timer to use GENERIC_TIME

Switch the 68328 CPU timer code to using GENERIC_TIME.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: remove unused CONFIG_DISKtel symbol

Remove unused CONFIG_DISKtel define.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: fix 528x ColdFire cache settings

Fix problems with the 528x ColdFire CPU cache setup.
Do not cache the flash region (if present), and make the runtime
settings consistent with the init setting.

Problems pointed out by Bernd Buttner <b.buettner@mkc-gmbh.de>

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: use container_of in mcf.c

Use container_of() instead of assuming local uart struct is first member
of uart_port struct.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: remove dead code from m68knommu timer code

Remove unused LED heartbeat code from m68knommu timer code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: use IRQF_DISABLE in m68328serial.c

Use IRQF_DISABLED instead of obsolete IRQ_FLG_STD for request_irq() flags
in m68328serial.c driver.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: create common DMA table for ColdFire CPUs

Move the ColdFire DMA address table into its own file, and out
of each of the different CPU config files. No need to have a copy
of it in each of the config setup files.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: modify Makefiles to support common coldfire directory

Modify Makefiles to support separate coldfire platform directory.

Currently the common ColdFire CPU family code sits in the
arch/m68knommu/platform/5307 directory. This is confusing, the files
containing this common code are in no way specific to the 5307 ColdFire.
Create an arch/m68knommu/platform/coldfire directory to contain this
common code. Other m68knommu CPU varients do not need use this code
though, so it doesn't make sense to move it to arch/m68knommu/kernel.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: move ColdFire vectors.c to its own coldfire directory

Move common ColdFire CPU vectors.c to common coldfire platform directory.

Currently the common ColdFire CPU family code sits in the
arch/m68knommu/platform/5307 directory. This is confusing, the files
containing this common code are in no way specific to the 5307 ColdFire.
Create an arch/m68knommu/platform/coldfire directory to contain this
common code. Other m68knommu CPU varients do not need use this code
though, so it doesn't make sense to move it to arch/m68knommu/kernel.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: move ColdFire timers.c to its own coldfire directory

Move common ColdFire CPU timers.c to common coldfire platform directory.

Currently the common ColdFire CPU family code sits in the
arch/m68knommu/platform/5307 directory. This is confusing, the files
containing this common code are in no way specific to the 5307 ColdFire.
Create an arch/m68knommu/platform/coldfire directory to contain this
common code. Other m68knommu CPU varients do not need use this code
though, so it doesn't make sense to move it to arch/m68knommu/kernel.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: move ColdFire pit.c to its own coldfire directory

Move common ColdFire CPU pit.c to common coldfire platform directory.

Currently the common ColdFire CPU family code sits in the
arch/m68knommu/platform/5307 directory. This is confusing, the files
containing this common code are in no way specific to the 5307 ColdFire.
Create an arch/m68knommu/platform/coldfire directory to contain this
common code. Other m68knommu CPU varients do not need use this code
though, so it doesn't make sense to move it to arch/m68knommu/kernel.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: move ColdFire head.S to its own coldfire directory

Move common ColdFire CPU head.S to common coldfire platform directory.

Currently the common ColdFire CPU family code sits in the
arch/m68knommu/platform/5307 directory. This is confusing, the files
containing this common code are in no way specific to the 5307 ColdFire.
Create an arch/m68knommu/platform/coldfire directory to contain this
common code. Other m68knommu CPU varients do not need use this code
though, so it doesn't make sense to move it to arch/m68knommu/kernel.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: move ColdFire entry.S to its own coldfire directory

Move common ColdFire CPU entry.S to common coldfire platform directory.

Currently the common ColdFire CPU family code sits in the
arch/m68knommu/platform/5307 directory. This is confusing, the files
containing this common code are in no way specific to the 5307 ColdFire.
Create an arch/m68knommu/platform/coldfire directory to contain this
common code. Other m68knommu CPU varients do not need use this code
though, so it doesn't make sense to move it to arch/m68knommu/kernel.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: platform setup for 5407 ColdFire parts

Switch to platform style configuration for 5407 ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: platform setup for 532x ColdFire parts

Switch to platform style configuration for 532x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: platform setup for 527x ColdFire parts

Switch to platform style configuration for 527x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: platform setup for 5307 ColdFire parts

Switch to platform style configuration for 5307 ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: platform setup for 528x ColdFire parts

Switch to platform style configuration for 528x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: platform setup for 5249 ColdFire parts

Switch to platform style configuration for 5249 ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: platform setup for 5272 ColdFire parts

Switch to platform style configuration for 5272 ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: platform setup for 520x ColdFire parts

Switch to platform style configuration for 520x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: platform setup for 523x ColdFire parts

Switch to platform style configuration for 523x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: platform setup for 5206e ColdFire parts

Switch to platform style configuration for 5206e ColdFire parts.
Initial support is for the UARTs. DMA support is moved to common code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: platform setup for 5206 ColdFire parts

Switch to platform style configuration for 5206 ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: configure support for new ColdFire serial driver

Add configure support for new ColdFire serial driver.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: build support for new ColdFire serial driver

Add build support for new ColdFire serial driver.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix dl2k constants

The MSSR constants didn't match the reality - bitfield declarations used
to be correct (1000BT_FD - bit 11, 1000BT_HD - bit 10), but enum had
them the other way round.  Went unnoticed until the switch from the
bitfields use to the explicit arithmetics and I hadn't caught that one
when verifying correctness of change...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

as-iosched: fix inconsistent ioc->lock context

Since it's acquired from irq context, all locking must be of the
irq safe variant. Most are already inside the queue lock (which
already disables interrupts), but the io scheduler rmmod path
always has irqs enabled and the put_io_context() path may legally
be called with irqs enabled (even if it isn't usually). So fixup
those two.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

ide-cd: fix leftover data BUG

It's perfectly legal to have data leftovers when a drive signals
completion, it happens all the time when a user issues a command
with a transfer count that is too large.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

block: make elevator lib checkpatch compliant

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

cfq-iosched: make checkpatch compliant

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

block: make core bits checkpatch compliant

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

block: new end request handling interface should take unsigned byte counts

No point in passing signed integers as the byte count, they can never
be negative.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

unexport add_disk_randomness

This patch removes the no longer used EXPORT_SYMBOL(add_disk_randomness).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

block/sunvdc.c:print_version() must be __devinit

This patch fixes the following section mismatches:

<--  snip  -->

...
WARNING: drivers/block/sunvdc.o(.text+0xf0): Section mismatch in reference from the function print_version() to the variable .devinit.data:version
WARNING: drivers/block/sunvdc.o(.text+0xf8): Section mismatch in reference from the function print_version() to the variable .devinit.data:version
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

splice: always updated atime in direct splice

Andre Majorel <aym-xunil@teaser.fr> points out that if we only updated
the atime when we transfer some data, we deviate from the standard
of always updating the atime. So change splice to always call
file_accessed() even if splice_direct_to_actor() didn't transfer
any data.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

[SPARC64]: Fix inconsistent .section usage in lib/

A few places missed the "a" specifier for the __ex_table section. Add
these so we avoid generation an additional section at link time.

Latest modpost would otherwise complain like this:

WARNING: vmlinux.o (__ex_table.2): section name inconsistency.
(.[number]+) following section name.
Did you forget to use "ax"/"aw" in a .S file?
Note that for example <linux/init.h> contains
section definitions for use in .S files.
WARNING: vmlinux.o (__ex_table.4): section name inconsistency.
(.[number]+) following section name.
Did you forget to use "ax"/"aw" in a .S file?
Note that for example <linux/init.h> contains
section definitions for use in .S files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC/SPARC64]: Fix usage of .section .sched.text in assembler code.

ld will generate an unique named section when assembler do not use
"ax" but gcc does. Add the missing annotation.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS]: Lookup in FIB semantic hashes taking into account the namespace.

The namespace is not available in the fib_sync_down_addr, add it as a
parameter.

Looking up a device by the pointer to it is OK. Looking up using a
result from fib_trie/fib_hash table lookup is also safe. No need to
fix that at all.  So, just fix lookup by address and insertion to the
hash table path.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS]: Add a namespace mark to fib_info.

This is required to make fib_info lookups namespace aware. In the
other case initial namespace devices are marked as dead in the local
routing table during other namespace stop.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: fib_sync_down rework.

fib_sync_down can be called with an address and with a device. In
reality it is called either with address OR with a device. The
codepath inside is completely different, so lets separate it into two
calls for these two cases.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS]: Process interface address manipulation routines in the namespace.

The namespace is available when required except rtm_to_ifaddr. Add
namespace argument to it.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Small style cleanup of the error path in rtm_to_ifaddr.

Remove error code assignment inside brackets on failure. The code
looks better if the error is assigned before condition check. Also,
the compiler treats this better.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Fix memory leak on error path during FIB initialization.

net->ipv4.fib_table_hash is not freed when fib4_rules_init failed.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Ipv6-related xt_hashlimit compilation fix.

The hashlimit_ipv6_mask() is called from under IP6_NF_IPTABLES config
option, but is not under it by itself.

gcc warns us about it :) :
net/netfilter/xt_hashlimit.c:473: warning: "hashlimit_ipv6_mask" defined but not used

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET_SCHED]: Add flow classifier

Add new "flow" classifier, which is meant to extend the SFQ hashing
capabilities without hard-coding new hash functions and also allows
deterministic mappings of keys to classes, replacing some out of tree
iptables patches like IPCLASSIFY (maps IPs to classes), IPMARK (maps
IPs to marks, with fw filters to classes), ...

Some examples:

- Classic SFQ hash:

  tc filter add ... flow hash \
   keys src,dst,proto,proto-src,proto-dst divisor 1024

- Classic SFQ hash, but using information from conntrack to work properly in
  combination with NAT:

  tc filter add ... flow hash \
   keys nfct-src,nfct-dst,proto,nfct-proto-src,nfct-proto-dst divisor 1024

- Map destination IPs of 192.168.0.0/24 to classids 1-257:

  tc filter add ... flow map \
   key dst addend -192.168.0.0 divisor 256

- alternatively:

  tc filter add ... flow map \
   key dst and 0xff

- similar, but reverse ordered:

  tc filter add ... flow map \
   key dst and 0xff xor 0xff

Perturbation is currently not supported because we can't reliable kill the
timer on destruction.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET_SCHED]: sch_sfq: make internal queues visible as classes

Add support for dumping statistics and make internal queues visible as
classes.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET_SCHED]: sch_sfq: add support for external classifiers

Add support for external classifiers to allow using different flow
hash functions similar to ESFQ. When no classifier is attached the
built-in hash is used as before.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET_SCHED]: Constify struct tcf_ext_map

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[BLUETOOTH]: Fix bugs in previous conn add/del workqueue changes.

Jens Axboe noticed that we were queueing &conn->work on both btaddconn
and keventd_wq.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Unexport sysctl_tcp_tso_win_divisor

This patch removes the no longer used
EXPORT_SYMBOL(sysctl_tcp_tso_win_divisor).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>