V4L/DVB (3390): Fix module parameters

Now, root may change parameters while module is running.
Thanks to Edgar Toerning

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3389): Fix broken IF-OUT Relay handling

Fixed broken IF-OUT on pinnacle sat board.
Thanks to Edgar Toernig

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3388): Ignore DiSEqC messages > 6 and < 3

Ignore invalid messages on cx24110 frontend.
Thanks to Edgar Toernig

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3386): Dvb-core: remove dead code

The field "dvr" in struct dmxdev is competely unused. Remove
it and code which allocates, initializes and frees it.

Signed-off-by: Peter Beutner <p.beutner@gmx.net>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3385): Dvb: fix __init/__exit section references in av7110 driver

use __devinit/__devexit/__devexit_p() where appropriate

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3382): Fix stv0297 for qam128 on tt c1500 (saa7146)

I have a TT C1500 card (saa7146, STV0297) which had problems tuning
channels at QAM128 (like the ones in the Finnish HTV / Welho network).
A fix which seems to work perfectly so far is to change the delay for
QAM128 to the same values as for QAM256 in stv0297_set_frontend(),

Signed-off-by: Mattias Nordstrom <nordstrom@realnode.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3380): TUV1236d: declare buffer as static const

Make buffer a static const

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3378): Restore power on defaults of tda9887 after tda8290 probe

The probing code for tda8290 changes the state of the tda9887 GP ports.
The patch assumes that if probing for tda8290 failed, this must be a
tda9887 and restores its power on defaults.
This should solve the module load order issue with some pinnacle cards.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3377): Support for Satelco EasyWatch DVB-S light

Support for Satelco EasyWatch DVB-S light.

Signed-off-by: Thilo Berger <thilo_berger@gmx.net>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3376): Add cpia2 camera support

There has been a CPIA2 driver out of kernel for a long time and it has
been pretty clean for some time too. This is an import of the
sourceforge driver which has been stripped of
- 2.4 back compatibility
- 2.4 old style MJPEG ioctls
A couple of functions have been made static and the docs have been
repackaged into Documentation/video4linux.  The rvmalloc/free functions now
match the cpia driver again.  Other than that this is the code as is.
Tested on x86-64 with a QX5 microscope.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3375): Add AUDIO_GET_PTS and VIDEO_GET_PTS ioctls

Add two new ioctls to read the 33 bit presentation time stamp from audio
and video devices as defined in ITU T-REC-H.222.0 and ISO/IEC 13818-1.
Acked-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3374): Adds debuging v4l2_memory enum

Some cleanup on printing enum names.
v4l2_memory now translated also to name.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3373): Debug messages for ioctl improved

Adds field and type name to debug message.
Also prints now format for type=capture.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3372): Fix a small bug when constructing fps and line numbers

Previously, only NTSC and PAL/M were associated to 30fps and
525 lines, so, PAL/60 were not handled properly.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3371): Add debug to ioctl arguments.

Added a new function that allows printing ioctl arguments.
This makes easier to include debug code under v4l ioctl
handling.
Also fixed some declarations on internal ioctl.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3369): LifeView FlyDVB-T Duo: add support for remote control

The remote controller on the LifeView FlyDVB-T Duo card work flawlessly
with the same settings as the LifeView FlyDVB-T LR301 card.

Signed-off-by: Rudo Thomas <rudo@matfyz.cz>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3368): KWorld HardwareMpegTV XPert: update comments

Standard video using the cx88 broadcast decoder is
working, but blackbird isn't working yet, audio is only
working correctly for television mode. S-Video and Composite
are working for video-only, so I have them disabled for now.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3366): Kworld ATSC110: initialize the tuner for analog mode on module load

- Enable the tuv1236 tuner on the Kworld-ATSC110 card so that the
  tuner can be identified when tuners.ko loads.
- With this change it is no longer necessary to remove and reload
  the tuner module in order to get the tuv1236 identified.
- This code was copied from the ATI HDTV Wonder init routine (in cx88-cards.c)
  which also uses the TUV1236D.

Signed-off-by: Curt Meyers <cmeyers@boilerbots.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3365): Kworld ATSC110: cleanups

- There is no radio with this tuner card...
Thanks-to: Dwaine Garden <DwaineGarden@rogers.com>
- fixed capitalization in card name.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3363): Kworld ATSC110: enable composite and svideo inputs

- corrected composite input.
- verified s-video input.

Signed-off-by: Curt Meyers <cmeyers@boilerbots.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3362): KWorld ATSC110: implement set_pll_input

- When tuning VSB, use ANT input
- When tuning QAM, use CABLE input

Signed-off-by: Curt Meyers <cmeyers@boilerbots.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3361): Add support for Kworld ATSC110

Signed-off-by: Andrew Burri <andrew.burri@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3354): Fix maximum for the saturation and contrast controls.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3352): Cxusb: fix lgdt3303 naming

The following are specific to lgdt3303, and are being renamed to reflect this.
- cxusb_lgdt330x_config renamed to cxusb_lgdt3303_config.
- cxusb_lgdt330x_frontend_attach renamed to cxusb_lgdt3303_frontend_attach.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3349): Remote control codes for BTTV_BOARD_CONTVFMI

The remote control interface for this board is the same as the one for
BTTV_BOARD_CONCEPTRONIC_CTVFMI2

Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3348): Fixed saa7134 ALSA initialization with multiple cards

When multiple cards were installed, only the first card would have
audio initialized, because only the first position in the array parameter
defaulted to "1"
To make things worse, the "enable" parameter wasn't enabled, so there
was no workaround.

Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3347): Pinnacle PCTV 40i: add filtered Composite2 input

This patch adds another composite input to the Pinnacle PCTV 100i
definition which filters the chrominace signal from the luma input. This
improves video quality for Composite signals on the S-Video connector of
the card.
In addition the name string of the card is changed to include PCTV 40i
and 50i since these cards are identical.

Signed-off-by: Karsten Suehring <ksuehring@gmx.net>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3346): Add saa713x card: ELSA EX-VISION 700TV (saa7130)

Add support for ELSA EX-VISION 700TV, which is the ELSA Japan's
flagship model of the software encoding TV capture card.
All inputs (Television, Composite1 and S-Video) have been tested.

Signed-off-by: Tamuki Shoichi <tamuki@linet.gr.jp>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3344): KWorld HardwareMpegTV XPert must set gpio2

- KWorld HardwareMpegTV XPert must set gpio2

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3343): KWorld HardwareMpegTV XPert: Add radio support

- add radio support for KWorld HardwareMpegTV XPert
- fix GPIO settings for tv and radio

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3341): Upstream sync - make 2 structs static

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3340): Make a struct static

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3337): Drivers/media/dvb/frontends/mt312.c: cleanups

This patch contains the following possible cleanups:
- update the Kconfig help to mention the VP310
- merge vp310_attach and mt312_attach into a new vp310_mt312_attach
  to remove some code duplication

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3336): Bt8xx documentation authors fix

- use one Author per line, which allows us to add more
  authors later without creating a mess.
- Add Michael Krufky due to -git commit
2cbeddc976645262dbe036d6ec0825f96af70da3

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3335): Fix in-kernel build

- remove tuner.ko build dependency on xc3028.o , which will be added again later.
- fix the following build error when using the "make kernel-links" build method to
  symlink the latest code from the v4l-dvb repository into the kernel source:
drivers/media/video/xc3028.c:31:20: em28xx.h: No such file or directory
drivers/media/video/xc3028.c: In function `xc3028_init':
drivers/media/video/xc3028.c:120: error: dereferencing pointer to incomplete type
drivers/media/video/xc3028.c:121: error: dereferencing pointer to incomplete type
drivers/media/video/xc3028.c:139: error: dereferencing pointer to incomplete type
drivers/media/video/xc3028.c:140: error: dereferencing pointer to incomplete type
make[3]: *** [drivers/media/video/xc3028.o] Error 1

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3334): Added ET61X251 fourcc type

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3332): XC3028 code marked with an special define option

- Current xc3028 support is still experimental, requiring more work to be
  sent to mainstream. So, it was marked inside some defines, in order to be
  removed by gentree.pl stript. Script also updated to remove it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3293): Fixed amux hauppauge hvr900/terratec hybrid xs

Fixed amux hauppauge hvr900/terratec hybrid xs

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3292): Fixed xc3028 firmware extractor, added terratec fw support

Fixed xc3028 firmware extractor for terratec's emBDA.sys firmware
Fixed delay in firmwareupload, now terratec's firmware also works

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3291): Added support for xc3028 analogue tuner  (Hauppauge HVR900, Terratec Hybrid XS)

Added support for xc3028 to v4l which adds support for:
 * Terratec Hybrid XS (analogue)
 * Hauppauge HVR 900 (analogue)

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3300b): .gitignore should also ignore StGit generated dirs

StGit genreates patches-* when you run stg export command.
It makes no sense to show such directories as changes on git status.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3300a): Removing personal email from DVB maintainers

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3326): Adding support for Terratec Prodigy XS

Adding support for Terratec Prodigy XS

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3325): Disabled debug on by default in tvp5150

disabled debug on by default in tvp5150

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3324): Fix Samsung tuner frequency ranges

Forgot to take the NTSC frequency offset into account.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3318e): DVB: remove the at76c651/tda80xx frontends

The at76c651 and tda80xx frontends are currently completely unused, IOW
their only effect is making the kernel larger for people accitentially
enabling them.

The current in-kernel drivers differ from the drivers at cvs.tuxbox.org,
and re-adding them when parts of the dbox2 project get merged should be
trivial.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3318c): fix saa7146 kobject register failure

Whoops.

kobject_register failed for hexium HV-PCI6/Orion (-13)
[<c01d3eb6>] kobject_register+0x31/0x47
[<c023a996>] bus_add_driver+0x4a/0xfd
[<c01de3c1>] __pci_register_driver+0x82/0xa4
[<d083400a>] hexium_init_module+0xa/0x47 [hexium_orion]
[<c013bdae>] sys_init_module+0x167b/0x1822
[<c01633f7>] do_sync_read+0xb8/0xf3
[<c0133fa3>] autoremove_wake_function+0x0/0x2d
[<c0145390>] audit_syscall_entry+0x118/0x13f
[<c0106ae2>] do_syscall_trace+0x104/0x14a
[<c0103d21>] syscall_call+0x7/0xb

slashes in kobject names aren't allowed.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3318b): sem2mutex: drivers/media/, #2

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3318a): Makes Some symbols static.

Some symbols at cx88-alsa were global. Making those static.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3316): Add initial support for KWorld HardwareMpegTV XPert

- Add initial support for KWorld HardwareMpegTV XPert.
- uses silicon tuner: tda8290 + tda8275
- standard video using cx88 broadcast decoder is working.
- blackbird mpeg encoder support (cx23416) not yet working.
- FM radio untested.
- audio is only working correctly in television mode,
  all other modes disabled.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3315): Added support for the Tevion DVB-T 220RF card

This is an analog / digital hybrid card.

Signed-off-by: Peter Hartshorn <p3r@users.sourceforge.net>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3314): Fixed em28xx based system lockup

Fixed em28xx based system lockup, device needs to be initialized
before starting the isoc transfer otherwise the system will completly lock up.

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3313): FIX: Check if FW was downloaded or not + new firmware file

- When a firmware was downloaded dvb_usb_device_init returns NULL for the
  dvb_usb_device, then nothing should be done with that pointer and device,
  because it will re-enumerate.
- A new firmware should be used with digitv devices.
- It should make "slave"-devices work and others, too.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3312): FIX: Multiple usage of VP7045-based devices

Reassigning function pointers in a static led to infinite loops when using
multiple VP7045-based device at the same time on one system. Using kmalloc'd
copies for reassignments is better.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3310): Use MT352 parallel transport function for all Bluebird FusionHDTV DVB-T boxes.

Use the parallel transport function of the MT352 demodulator in
TH7579 and LGZ201 -based FusionHDTV Bluebird usb boxes.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3308): Use parallel transport for FusionHDTV Dual Digital USB

Use the parallel transport function of the MT352 in USB demodulator of the
Dual Digital board.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3307): Support for Galaxis DVB-S rev1.3

support for Galaxis DVB-S rev1.3 (subsystem 13c2:0004)

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3306): Fixed i2c return value, conversion mdelay to msleep

fixed i2c return value, conversion mdelay to msleep

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3305): Added support for the ADS Instant TV DUO Cardbus PTV331

Analog and DVB-T are working, Remote not yet.
This card is based on the new LifeView design, there should be many variants.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3304): TDA10046 Driver update

- Set outputs to tristate in sleep mode
- Reduce dangerously high firmware download speed with 16MHz xtal
- added tda827x configuration with GPIOs low
- added comments to stupid looking IIC reads that work around bugs in
  the tda10046.
- some minor updates

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3303): TDA8290 update

This patch
- works around a bug in the I2C bridge that makes the initialization
  of the TDA10046 fail on recent LifeView cards
- puts the AGC output to tristate in sleep mode. This is necessary for
  recent hybrid cards that switch the AGC via tristateing.

Signed-off-by: Hartmut Hackmann<hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3302): Added support for the LifeView FlyDVB-T LR301 card

Additionally to the card support, this changeset adds the option
tda10046lifeview to get_dvb_firmware to download tda10046 firmware
from LifeView's site.

Signed-off-by: Giampiero Giancipoli <gianci@libero.it>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3300): Add standard for South Korean NTSC-M using A2 audio.

South Korea uses NTSC-M but with A2 audio instead of BTSC. Several audio
chips need this information in order to set the correct audio processing
registers.

Acked-by: Mauro Carvalho Chehab <mauro_chehab@yahoo.com.br>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3299): Kconfig: DVB_USB_CXUSB depends on DVB_LGDT330X and DVB_MT352

- rename DVB_USB_CXUSB one-liner description to:
  Conexant USB2.0 hybrid reference design support.
- with the addition of bluebird support to dvb-usb-cxusb,
  it now depends on lgdt330x and mt352 modules.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3297): Add IR support to KWorld DVB-T (cx22702-based)

add IR support to KWorld DVB-T (cx22702-based)

Signed-off-by: Marco Manenti <marco_manenti@colman.it>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3294): Fix [Bug 5895] to correct snd_87x autodetect

With DVB drivers enabled snd_87x (ALSA) don't detect.

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3281): Added signal detection support to tvp5150

- added signal detection support to tvp5150

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3280): Changed description of KWorld PVR TV 2800RF

Changed description of KWorld PVR TV 2800RF

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3278): Show debug for tuners trying to use unsupported video standards

With tuner_debug enabled, if a tuner tries to use a video standard that doesn't
have a matching tuner_params defined, the IFPCoff value and tuner number will
be displayed, and the default tuner_params entry will be used.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3277): Use default tuner_params if desired_type not available

If a given tuner definition contains more than one tuner_params array members,
it will try to select the appropriate tuner_params based on the video standard
in use. If there is no tuner_params defined for the current video standard, it
will select the default, tuner_params[0]

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3276): Added terratec hybrid xs and kworld 2800rf support

- Added terratec hybrid xs product/vendorid
- Added gpio audio initialization for kworld pvr 2800rf

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3275): Allow SAA7134 to fall back to AM sound when there is NICAM-L

This patch allows to select AM sound even if NICAM is detected.
Proposed by Alain Frappin

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3271): Update tuner comments

Right now, all tuners are using the first tuner_params[]
array element for analog mode. We are now ready to begin merging
similar tuner definitions together, such that each tuner definition
will have a tuner_params struct for each available video standard.
The tuner_params[] array element will be chosen based on the video
standard in use.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3270): Tuner_dbg will show tuner param and range selected

- tuner_dbg will show tuner param and range selected

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3269): Allow multiple tuner params in each tuner definition

- allow multiple tuner params in each tuner definition.
- the correct tuner_params element will be chosen based on
  current video standard.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3268): Move video std detection to top of set_tv_freq function

- move video std detection to top of set_tv_freq function
- we must detect video std first, so that we can choose the correct
  tuner_params

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3267): Add support for the Avermedia 777 DVB-T card

Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3266): Fix NICAM buzz on analog sound

Apparently, having the number of lines fixed at 4 reduces (or even kills)
the buzz found in NICAM stereo with analog sound.

Signed-off-by: Marcin Rudowski <mar_rud@poczta.onet.pl>
Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3265): Add count to tunertype struct

The tuner_params element is an array of undefined length,
with each array member being a set of parameters for each
video standard type.
The number of members in the tuner_params array
will be stored in tuners[]->count

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3453a): Alters MAINTAINERS file to point to newer v4l-dvb email

- V4L/DVB Maintainers list changed. This patch alters the email to the
  new address.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-By: Johannes Stezenbach <js@linuxtv.org>

V4L/DVB (3442): Allow tristate build for cx88-vp3054-i2c

- allow tristate build for cx88-vp3054-i2c

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3439a): media video stradis memory fix

memset clears once set structure, there is actually no need for memset,
because configure function do it for us.  Next, vfree(NULL) is legal, so
avoid useless labels.

Thanks Dave Jones for reporting this.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3439): removed duplicated tuner_ranges

- removed duplicated tuner_ranges

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3436): move config byte from tuner_params to tuner_range struct.

- Move config byte from tuner_params to tuner_range struct.
- dvb tuners must be able to set different config byte for each range.

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3435): rename cb variable names in tuner structures for global consistency

- rename cb variable names in tuner structures for global consistency

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3434): changed comment in tuner-core.c

- changed comment in tuner-core.c

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3433): Fix printk type warning

- Fix printk type warning:
drivers/media/dvb/b2c2/flexcop-pci.c:164: warning:
format '%08x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3432): Hauppauge HVR 900 Composite support

- Hauppauge HVR 900 Composite support

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3431): fixed spelling error, exectuted --> executed.

- fixed spelling error, exectuted --> executed.

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3430): Add new internal VIDIOC_INT commands

- Add new internal VIDIOC_INT commands for setting the tuner mode,
for putting a chip into standby mode and to set/get the routing
of inputs/outputs of audio or video of a chip. These new commands
will replace older commands that are no longer up to the task.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3429): Missing break statement on tuner-core

- default_tuner_init was called twice due to a missing break statement.

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Acked-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3428): drivers/media/dvb/ possible cleanups

- Make needlessly global code static
- #if 0 the following unused global functions:
- b2c2/flexcop-dma.c: flexcop_dma_control_packet_irq()
- b2c2/flexcop-dma.c: flexcop_dma_config_packet_count()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3427): audmode and rxsubchans fixes (VIDIOC_G/S_TUNER)

- Audmode and rxsubchans fixes in msp3400, tuner, tvaudio and cx25840.
- msp3400 cleanups

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3423): CodingStyle fixes.

- CodingStyle fixes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3422): Implemented VIDIOC_G_FMT/S_FMT for sliced VBI

- Implemented VIDIOC_G_FMT/S_FMT for sliced VBI
- VIDIOC_S_FMT now calls a function

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3421): Several fixes to prepare for VBI

- Fixed VBI compilation.
- Included capacity to specify vbi and video number.
- Added a better control for using more than one em28xx device.
- VIDIOC_G_FMT now calls a function.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3420): Added iocls to configure VBI on tvp5150

- Added iocls to configure VBI on tvp5150

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3419): added some VBI macros and moved minor definitions to header file

- Moved some hardcoded minor numbers to videodev2.h
- Included more comments for sliced VBI standards
- Included some VBI macros to group similar standards

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3418): Cause tda9887 to use I2C_DRIVERID_TDA9887

- The tda9887 has an I2C id reserved for it, but it hasn't been using
it.  Probably an oversight.  Fixed with this patch.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3417): make VP-3054 Secondary I2C Bus Support a Kconfig option.

- make VP-3054 Secondary I2C Bus Support a Kconfig option.

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>