Luis R. Rodriguez [Fri, 19 Jul 2013 04:37:19 +0000 (04:37 +0000)]
backports: copy the max77693-private.h header file
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Fri, 19 Jul 2013 02:53:01 +0000 (02:53 +0000)]
backports: simplify swiotlb_nr_tbl() backport
swiotlb_nr_tbl() was available since 3.2 but was exported since 3.3.
Since it uses an internal global state variable, it is impossible
to backport it to. Instead of reverting the changes added just
let this return 0 as the code will not do anything. This simplifies
the backport.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Fri, 19 Jul 2013 01:24:11 +0000 (01:24 +0000)]
backports: refresh patches for next-
20130627
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Fri, 19 Jul 2013 01:14:18 +0000 (01:14 +0000)]
backports: fix patches required for next-
20130627
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Johannes Berg [Tue, 16 Jul 2013 12:57:57 +0000 (15:57 +0300)]
backport: backport sprintf-style workqueue naming
Since kernel version 3.3, workqueue names could be
sprintf'ed instead of just pointing to a name. This
wasn't used a lot so never needed to be backported,
but now it's used everywhere. Backport this API.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[mcgrof: add WQ_HIGHPRI and WQ_MEM_RECLAIM defines]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 18 Jul 2013 23:40:55 +0000 (16:40 -0700)]
backports: backport drvdata = NULL core driver fixes
The Linux kernel had tons of code which at times cleared the
drvdata upon probe failure or release. There are however a bunch
of drivers that didn't clear this.
Commit
0998d063 implmented clearing this upon device_release_driver()
and dealt with probe failure on driver_probe_device(). After this the
kernel was cleaned up separately with *tons* of patches to remove all
these driver specific settings given that the clearing is now done
internally by the device core.
Instead of ifdef'ing code back in for older code where it was properly
in place backport this by piggy backing the new required code upon the
calls used in place. There is a small race here upon device_release_driver()
but we can live with that theoretical race.
Due to the way we hack this backport we can't use a separate namespace
as we have with other symbols.
mcgrof@frijol ~/linux-stable (git::master)$ git describe --contains \
0998d0631001288a5974afc0b2a5f568bcdecb4d
v3.6-rc1~99^2~14^2~17
I count 65 patches implemented after this:
mcgrof@frijol ~/linux-stable (git::master)$ git format-patch \
--grep="device-core: Ensure drvdata = NULL when no driver is bound" \
-o null-drv-fix v3.6-rc1~99^2~14^2~17..
TL;DR
Alan Stern argued that perhaps applying this to backports wasn't a good
idea given that evidence shows that the original patch actually exposed
tons of bugs in driver code where they were doing the wrong thing.
While this may be true if the original patch was a bad idea it should
be reverted, and if a bug is found upstream, then by all means
finding it through backports will only accelerate the pace at which
we fix these exposed bugs. That is, if a bug is found due to this on
backports then a respective fix for it should go upstream, not to
backports. This is the benefit of providing backports releases: keep
your users engaged on upstream fixes.
Furthermore I am in hopes that perhaps we can SmPL'ify the bugs
instead and in the future perhaps require SmPL to proove that
the what the original patch was doing won't affect the inverse
of what the patch was trying to do -- that is drivers doing the
wrong thing.
commit
0998d0631001288a5974afc0b2a5f568bcdecb4d
Author: Hans de Goede <hdegoede@redhat.com>
Date: Wed May 23 00:09:34 2012 +0200
device-core: Ensure drvdata = NULL when no driver is bound
1) drvdata is for a driver to store a pointer to driver specific data
2) If no driver is bound, there is no driver specific data associated with
the device
3) Thus logically drvdata should be NULL if no driver is bound.
But many drivers don't clear drvdata on device_release, or set drvdata
early on in probe and leave it set on probe error. Both of which results
in a dangling pointer in drvdata.
This patch enforce for drvdata to be NULL after device_release or on probe
failure.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested with ckmake against next-
20130618:
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.79 [ OK ]
18 3.1.10 [ OK ]
19 3.10-rc1 [ OK ]
20 3.2.45 [ OK ]
21 3.3.8 [ OK ]
22 3.4.46 [ OK ]
23 3.5.7 [ OK ]
24 3.6.11 [ OK ]
25 3.7.10 [ OK ]
26 3.8.13 [ OK ]
27 3.9.3 [ OK ]
real 32m2.332s
user 860m23.688s
sys 121m20.840s
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Fri, 12 Jul 2013 22:59:07 +0000 (15:59 -0700)]
backports: add gplizer for EXPORT_SYMBOL_GPL() help
If we forget to use EXPORT_SYMBOL_GPL() we can run this.
We may later use this for other things.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Fri, 12 Jul 2013 22:39:13 +0000 (15:39 -0700)]
backports: Fix and document EXPORT_SYMBOL_GPL() preference
In terms of project naming the backports project has evolved
as follows:
compat-wireless --> compat-drivers --> backports
All along the design and intent behind the initial project
has been to provide a framework for delivery of *upstream*
drivers using a backported infrastructure. I've made it
clear that in no way shape or form did I ever want any
proprietary driver to make use of the framework. As the
project has grown I'm not alone with this sentiment so
lets document that and also fix a few symbols that have
slipped along the way.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Fri, 12 Jul 2013 01:07:15 +0000 (18:07 -0700)]
backports: update README to include new subsystems
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Fri, 12 Jul 2013 00:34:30 +0000 (17:34 -0700)]
backports: add make help and defconfig-help targets
Throw users a bone by helping them compile specific target
drivers. Hauke did some good work in providing tons of
defconfigs, provide a command to let users query these
easily with 'make defconfig-help'. Also provide a more
generic 'make help' target.
Screenshot of make defconfig-help:
mcgrof@frijol ~/backports-
20130618 $ make defconfig-help
Driver or subsystem configuration targets:
defconfig-alx
defconfig-ar5523
defconfig-ath5k
defconfig-ath6kl
defconfig-ath9k
defconfig-ath10k
defconfig-b43
defconfig-b43legacy
defconfig-brcmfmac
defconfig-brcmsmac
defconfig-carl9170
defconfig-drm
defconfig-ieee802154
defconfig-iwlwifi
defconfig-media
defconfig-nfc
defconfig-regulator
defconfig-rtlwifi
defconfig-wifi
defconfig-wil6210
Running 'make help' will provide the above and in addition to that
something similar to what the Linux kernel provides with the
list of supported targets backports provides.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Fri, 12 Jul 2013 00:43:02 +0000 (17:43 -0700)]
backports: add ath10k defconfig
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 27 Jun 2013 21:20:31 +0000 (21:20 +0000)]
backports: add SPEED_UNKNOWN and DUPLEX_UNKNOWN
This gets us in synch with next-
20130618.
This was added via uapi/linux/ethtool.h but using
that file causes some odd issues I simply cannot
resolve right now. I stuff these definitions into
the regular include/linux/ethtool.h for now.
This backports commit
589665f5 added via v3.2.
mcgrof@frijol ~/linux-stable (git::master)$ git describe --contains \
589665f5a6008dbce1d0af2cb93e94a80bf78151
v3.2-rc1~4^2~10
commit
589665f5a6008dbce1d0af2cb93e94a80bf78151
Author: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri Nov 4 08:21:38 2011 +0000
bonding: comparing a u8 with -1 is always false
slave->duplex is a u8 type so the in bond_info_show_slave() when we
check "if (slave->duplex == -1)", it's always false.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.79 [ OK ]
18 3.1.10 [ OK ]
19 3.10-rc1 [ OK ]
20 3.2.45 [ OK ]
21 3.3.8 [ OK ]
22 3.4.46 [ OK ]
23 3.5.7 [ OK ]
24 3.6.11 [ OK ]
25 3.7.10 [ OK ]
26 3.8.13 [ OK ]
27 3.9.3 [ OK ]
real 15m7.262s
user 335m33.818s
sys 82m36.486s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 27 Jun 2013 18:35:55 +0000 (18:35 +0000)]
backports: add new alx upstream backport
This backports the new upstream alx driver and
properly splits up each required backports into
its respective collateral evolution bucket.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 26 Jun 2013 19:32:33 +0000 (12:32 -0700)]
backports: remove alx extra patch
The alx driver was upstreamed by Johannes, so this is
no longer required. Note that this driver is now GPLv2
or later, BSD folks will have to look at the old unified
tree for a permissive licensed port.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
ASIC Felix [Fri, 21 Jun 2013 05:02:52 +0000 (22:02 -0700)]
backports: re-introduce make uninstall
This approach only uninstalls modules you have built
previously on your current build directory for backports.
If this requires adjustments then we'll have to just have
to use our own new backports KMODDIR.
Signed-off-by: Felix Bitterli <ic.felix@gmail.com>
[mcgrof: extended the commit log a bit]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Johannes Berg [Tue, 25 Jun 2013 10:46:44 +0000 (12:46 +0200)]
backport: include printk.h into backport-3.11.c
This is needed for pr_warn(), otherwise it's not defined on
all kernels (it is sometimes pulled in by other headers.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Johannes Berg [Wed, 29 May 2013 20:13:34 +0000 (22:13 +0200)]
backports: update output template .gitignore for kconfig move
I clearly forgot this during the Kconfig move, the .gitignore
that is in the output template directory (and used with the
git-tracker) needs to be updated for the kconf directory move.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Mon, 17 Jun 2013 11:44:54 +0000 (13:44 +0200)]
backports: refresh patches on next-
20130617
== ckmake-report.log ==
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.79 [ OK ]
18 3.1.10 [ OK ]
19 3.10-rc1 [ OK ]
20 3.2.45 [ OK ]
21 3.3.8 [ OK ]
22 3.4.46 [ OK ]
23 3.5.7 [ OK ]
24 3.6.11 [ OK ]
25 3.7.10 [ OK ]
26 3.8.13 [ OK ]
27 3.9.3 [ OK ]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 17 Jun 2013 12:22:02 +0000 (14:22 +0200)]
backprots: ath10k needs at least kernel version 2.6.30
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 17 Jun 2013 12:10:42 +0000 (14:10 +0200)]
backprots: add rounddown
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 17 Jun 2013 11:25:53 +0000 (13:25 +0200)]
backports: add PCI_DEVICE_SUB
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 17 Jun 2013 11:09:43 +0000 (13:09 +0200)]
backports: add USB_DEVICE_INTERFACE_NUMBER
The original version also checked for bInterfaceNumber, which is only
available in more recent kernel versions.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 17 Jun 2013 11:10:59 +0000 (13:10 +0200)]
backports: remove useless include in USB_VENDOR_AND_INTERFACE_INFO
This also changes the #if <kernel version> to a ifndef, now it is also
compatible with kernel already containing this backport.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 17 Jun 2013 11:03:05 +0000 (13:03 +0200)]
backports: deactivate FireDTV DVB Driver for kernel < 3.11
This would need the following commit backported:
commit
94a87157cde95d38b9cdf1116e4f0fd93f6d25df
Author: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sun Jun 9 18:15:00 2013 +0200
firewire: introduce fw_driver.probe and .remove methods
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 15 Jun 2013 10:25:05 +0000 (12:25 +0200)]
backports: add ieee802154
This adds the ieee802154 subsystem.
== ckmake-report.log ==
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.79 [ OK ]
18 3.1.10 [ OK ]
19 3.10-rc1 [ OK ]
20 3.2.45 [ OK ]
21 3.3.8 [ OK ]
22 3.4.46 [ OK ]
23 3.5.7 [ OK ]
24 3.6.11 [ OK ]
25 3.7.10 [ OK ]
26 3.8.13 [ OK ]
27 3.9.3 [ OK ]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 15 Jun 2013 15:26:53 +0000 (17:26 +0200)]
backports: add cast in class_find_device()
Also type of the 3 parameter of class_find_device() changed from void *
to const void *, add a cast to prevent a warning.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 15 Jun 2013 10:19:57 +0000 (12:19 +0200)]
backports: add module_spi_driver
module_spi_driver was added in the following commit to mainline:
commit
3acbb0142d48713a8f65cde678a54f419801c189
Author: Lars-Peter Clausen <lars@metafoo.de>
Date: Wed Nov 16 10:13:37 2011 +0100
SPI: Add helper macro for spi_driver boilerplate
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 15 Jun 2013 10:18:30 +0000 (12:18 +0200)]
backports: use the given parameter in NETLINK_CB_PORTID()
NETLINK_CB_PORTID() ignored the given parameter, this was wrong.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 15 Jun 2013 10:57:34 +0000 (12:57 +0200)]
backports: add NET_CORE config option
NET_CORE was added with kernel 3.2 and before this patch no Ethernet
driver was build on older kernel versions.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 15 Jun 2013 11:52:30 +0000 (13:52 +0200)]
backports: build ATL1E only on kernel > 2.6.26
The ATL1E driver needs netif_set_gso_max_size() and this is not
available in older kernel versions.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 15 Jun 2013 11:50:09 +0000 (13:50 +0200)]
backports: alx driver needs at least kernel 2.6.31
The alx driver uses drivers/net/mdio.c which was added with kernel
2.6.31. Build the alx driver only on this kernel version or a more
recent one.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 15 Jun 2013 13:17:50 +0000 (15:17 +0200)]
backports: move netif_set_real_num_rx_queues() to compat-2.6.37.c
netif_set_real_num_rx_queues() was added to kernel version 2.6.37 and
not to kernel 2.6.35 therefore it should also be added to the
corresponding compat-*.c file.
This also adds a missing EXPORT_SYMBOL, documentation and a check.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Luis R. Rodriguez [Thu, 13 Jun 2013 19:50:12 +0000 (12:50 -0700)]
backports: rename compat file descriptions
Make these descriptions generic.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 9 Jun 2013 14:31:16 +0000 (16:31 +0200)]
backprots: add default config with all wifi drivers
This default config contains all wifi drivers.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 9 Jun 2013 12:16:58 +0000 (14:16 +0200)]
backports: fix tracing on wil6210
This includes the trace.h file like it is done for the other drivers.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 9 Jun 2013 11:40:48 +0000 (13:40 +0200)]
backports: add default config for alx
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 9 Jun 2013 11:38:05 +0000 (13:38 +0200)]
backports: alx driver now uses NETIF_F_HW_VLAN_CTAG_*
This was/will be renamed in the alx driver, this patch makes backports
work with alx again.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 9 Jun 2013 10:49:41 +0000 (12:49 +0200)]
backports: add defconfigs for Atheros wifi drivers
This adds default configs for Atheros wifi drivers.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 9 Jun 2013 10:26:10 +0000 (12:26 +0200)]
backports: adapt shrinkers api patch to next-
20130607
The shrinkers api changed a little in the last version, this patch
makes the patches apply again.
== ckmake-report.log ==
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.79 [ OK ]
18 3.1.10 [ OK ]
19 3.10-rc1 [ OK ]
20 3.2.45 [ OK ]
21 3.3.8 [ OK ]
22 3.4.46 [ OK ]
23 3.5.7 [ OK ]
24 3.6.11 [ OK ]
25 3.7.10 [ OK ]
26 3.8.13 [ OK ]
27 3.9.3 [ OK ]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Thu, 6 Jun 2013 11:45:10 +0000 (13:45 +0200)]
backports: refersh patches on next-
20130606
There was a manual adjustment needed in
patches/collateral-evolutions/network/11-dev-pm-ops/drivers_net_wireless_iwlegacy_common.patch
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.79 [ OK ]
18 3.1.10 [ OK ]
19 3.10-rc1 [ OK ]
20 3.2.45 [ OK ]
21 3.3.8 [ OK ]
22 3.4.46 [ OK ]
23 3.5.7 [ OK ]
24 3.6.11 [ OK ]
25 3.7.10 [ OK ]
26 3.8.13 [ OK ]
27 3.9.3 [ OK ]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Thu, 6 Jun 2013 11:56:49 +0000 (13:56 +0200)]
backports: use old shrinkers API on old kernels
The shrinkers API was changed in new kernel versions. This patch makes
the drm drivers use the old version on older kernel versions.
This backports the following commit from mainline kernel:
commit
1c1df1f6646854cca15fede54ec475b0e9f6a162
Author: Dave Chinner <dchinner@redhat.com>
Date: Thu Jun 6 10:40:41 2013 +1000
drivers: convert shrinkers to new count/scan API
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Thu, 6 Jun 2013 11:48:04 +0000 (13:48 +0200)]
backports: backport some memory functions
This includes the following functions needed by some drm drivers:
arch_phys_wc_add()
arch_phys_wc_del()
phys_wc_to_mtrr_index()
This backports the following commit form mainline kernel:
commit
d0d98eedee2178c803dd824bb09f52b0e2ac1811
Author: Andy Lutomirski <luto@amacapital.net>
Date: Mon May 13 23:58:40 2013 +0000
Add arch_phys_wc_{add, del} to manipulate WC MTRRs if needed
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Johannes Berg [Tue, 4 Jun 2013 12:21:52 +0000 (14:21 +0200)]
gentree/git-tracker: make python 3 compatible
Make the python scripting compatible with python 3
(as tested with python 3.3). The patch library was
a bit tricky.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Johannes Berg [Mon, 3 Jun 2013 15:54:33 +0000 (17:54 +0200)]
backports: use check-lxdialog.sh
We ship it, so we should use it. This should fix issues
like one distro needing "-lncurses -ltinfo" and others
requiring just "-lncurses" and not having "tinfo".
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sat, 1 Jun 2013 16:00:17 +0000 (18:00 +0200)]
backports: do not backport struct watchdog_device in RHEL 6.4
This is already included in the RHEL 6.4 kernel.
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.79 [ OK ]
18 3.1.10 [ OK ]
19 3.10-rc1 [ OK ]
20 3.2.45 [ OK ]
21 3.3.8 [ OK ]
22 3.4.46 [ OK ]
23 3.5.7 [ OK ]
24 3.6.11 [ OK ]
25 3.7.10 [ OK ]
26 3.8.13 [ OK ]
27 3.9.3 [ OK ]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sat, 1 Jun 2013 16:00:16 +0000 (18:00 +0200)]
backports: protect pcmcia_enable_device
This is already defined in RHEL 6.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sat, 1 Jun 2013 16:00:15 +0000 (18:00 +0200)]
backports: protect irq_set_irq_type()
irq_set_irq_type is defined to set_irq_type in RHEL 6.4.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sat, 1 Jun 2013 16:00:14 +0000 (18:00 +0200)]
backports: to not backport skb_add_rx_fragi() on RHEL 6.4
The kernel in RHEL 6.4 already ships with skb_add_rx_frag() with 6
arguments.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sat, 1 Jun 2013 16:00:13 +0000 (18:00 +0200)]
backports: do not backport skb_tx_timestamp() on RHEL 6.4
The skb_tx_timestamp() implementation in RHEL 6.4 actually does
something.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sat, 1 Jun 2013 16:00:12 +0000 (18:00 +0200)]
backports: do not backport shmem_read_mapping_page_gfp() on RHEL 6.4
shmem_read_mapping_page_gfp() looks different in the RHEL 6.4 source
code and we should use that version instead.
This also adds a missing include to prefix this function with backport_.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sat, 1 Jun 2013 16:00:11 +0000 (18:00 +0200)]
backports: do not backport netif_set_real_num_rx_queues() on RHEL 6.4
The in kernel version of netif_set_real_num_rx_queues() on RHEL 6.4
accesses some other struct members than our backported version. We
should use that version instead.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sat, 1 Jun 2013 16:00:10 +0000 (18:00 +0200)]
backports: no kfifo.h when !CPTCFG_BACKPORT_BUILD_KFIFO
When CPTCFG_BACKPORT_BUILD_KFIFO is not selected the default kernel
header file should be used and not the backport code from backports. On
RHEL 6.4 the kfido-new.h is included instead of the normal kfifo.h.
The kfifo backport code is only build when CPTCFG_BACKPORT_BUILD_KFIFO
is set and not depending on some kernel version.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sat, 1 Jun 2013 16:00:09 +0000 (18:00 +0200)]
backports: fix DEFINE_DYNAMIC_DEBUG_METADATA for RHEL 6.4
The struct _ddebug does not have a enabled attribute in RHEL 6.4.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sat, 1 Jun 2013 16:00:08 +0000 (18:00 +0200)]
backports: add missing LINUX_BACKPORT
This adds some missing LINUX_BACKPORT. This was found while compiling
against CentOS 6.4.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sat, 1 Jun 2013 16:00:07 +0000 (18:00 +0200)]
backports: add RedHat version
We have to deactivate some backports when a RedHat kernel was found,
the LINUX_BACKPORT preprocessor statement is not sufficient enough.
This is done based on RHEL_RELEASE_CODE. When backports is compiled
against a non RedHat kernel the RHEL_RELEASE_CODE is set to 0, so these
defines are defined to some value.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Fri, 31 May 2013 19:15:24 +0000 (21:15 +0200)]
backports: refresh patches for next-
20130531
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.79 [ OK ]
18 3.1.10 [ OK ]
19 3.10-rc1 [ OK ]
20 3.2.45 [ OK ]
21 3.3.8 [ OK ]
22 3.4.46 [ OK ]
23 3.5.7 [ OK ]
24 3.6.11 [ OK ]
25 3.7.10 [ OK ]
26 3.8.13 [ OK ]
27 3.9.3 [ OK ]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Fri, 31 May 2013 19:15:23 +0000 (21:15 +0200)]
backports: add rcu_dereference_rtnl
Add backport for rcu_dereference_rtnl()
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Fri, 31 May 2013 19:15:22 +0000 (21:15 +0200)]
backports: add backport for netdev_notifier_info_to_dev()
This adds a backport for the following commit in mainline:
commit
351638e7deeed2ec8ce451b53d33921b3da68f83
Author: Jiri Pirko <jiri@resnulli.us>
Date: Tue May 28 01:30:21 2013 +0000
net: pass info struct via netdevice notifier
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Anoop Karollil [Fri, 31 May 2013 00:05:18 +0000 (17:05 -0700)]
backports: fix firmware install for old udev on Ubuntu
Rules for older versions of udev (e.g. version 113-0ubuntu16 on Ubuntu 7.10) are
looked for in /etc/udev/rules.d. For later versions, they are looked for in
either the default /lib/udev/rules.d location or the custom /etc/udev/rules.d
location. For backwards compatibility with older udev, the rules should be
installed in /etc/udev/rules.d.
Signed-off-by: Anoop Karollil <anoop.karollil@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 29 May 2013 07:53:53 +0000 (00:53 -0700)]
backports: refresh patches for next-
20130528
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.79 [ OK ]
18 3.1.10 [ OK ]
19 3.10-rc1 [ OK ]
20 3.2.45 [ OK ]
21 3.3.8 [ OK ]
22 3.4.46 [ OK ]
23 3.5.7 [ OK ]
24 3.6.11 [ OK ]
25 3.7.10 [ OK ]
26 3.8.13 [ OK ]
27 3.9.3 [ OK ]
real 33m11.072s
user 877m52.824s
sys 139m8.874s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Johannes Berg [Tue, 28 May 2013 20:33:14 +0000 (22:33 +0200)]
backports: catch make in backport template directory
Catch running make in the backport template directory by
checking for the .local-symbols file. If it isn't there
then we're in the input/template directory rather than in
an output tree, give the user a hint about it instead of
keeling over.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Johannes Berg [Thu, 23 May 2013 14:12:27 +0000 (16:12 +0200)]
backport: move kconfig code to "kconf" directory
Having the kconfig code in a directory called "kconfig"
and having a file called "Kconfig" causes issues if the
code is ever stored on a case-insensitive filesystem.
Avoid these by just calling the kconfig directory kconf
instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Tue, 28 May 2013 18:49:24 +0000 (11:49 -0700)]
Revert "backport: move kconfig code to "kconf" directory"
I failed to see v2 patch.
This reverts commit
7f1b4e0258ade60670cf60f2bd46996005843cea.
Johannes Berg [Thu, 23 May 2013 14:11:27 +0000 (16:11 +0200)]
backport: move kconfig code to "kconf" directory
Having the kconfig code in a directory called "kconfig"
and having a file called "Kconfig" causes issues if the
code is ever stored on a case-insensitive filesystem.
Avoid these by just calling the kconfig directory kconf
instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 26 May 2013 19:52:30 +0000 (21:52 +0200)]
backports: BCMA and SSB MIPS drivers are depending on kernel >= 3.3
The bcma and ssb mips driver are depending on kernel 3.3.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 26 May 2013 19:52:29 +0000 (21:52 +0200)]
backports: add missing include to dma-shared-helpers.c
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 26 May 2013 19:52:28 +0000 (21:52 +0200)]
backports: refresh patches on next-
20130523
== ckmake-report.log ==
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.79 [ OK ]
18 3.1.10 [ OK ]
19 3.10-rc1 [ OK ]
20 3.2.45 [ OK ]
21 3.3.8 [ OK ]
22 3.4.46 [ OK ]
23 3.5.7 [ OK ]
24 3.6.11 [ OK ]
25 3.7.10 [ OK ]
26 3.8.13 [ OK ]
27 3.9.3 [ OK ]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 26 May 2013 19:52:27 +0000 (21:52 +0200)]
backports: add vm_iomap_memory()
This adds vm_iomap_memory() from:
commit
b4cbb197c7e7a68dbad0d491242e3ca67420c13e
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue Apr 16 13:45:37 2013 -0700
vm: add vm_iomap_memory() helper function
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 26 May 2013 19:52:26 +0000 (21:52 +0200)]
backports: build NFC_MEI_PHY only on >= 3.10
The MEI NFC driver needs include/linux/mei_cl_bus.h which was added
with kernel 3.10.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Mon, 20 May 2013 11:29:05 +0000 (13:29 +0200)]
backports: add kernel 3.10 and update others
Add kernel 3.10 to the script fetching the kernels for compile testing.
This also fixes the header rebuild for kernel versions >= 3.10.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Mon, 20 May 2013 11:29:04 +0000 (13:29 +0200)]
backports: refresh patches for next-
20130520
== ckmake-report.log ==
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.79 [ OK ]
18 3.1.10 [ OK ]
19 3.10-rc1 [ OK ]
20 3.2.45 [ OK ]
21 3.3.8 [ OK ]
22 3.4.46 [ OK ]
23 3.5.7 [ OK ]
24 3.6.11 [ OK ]
25 3.7.10 [ OK ]
26 3.8.13 [ OK ]
27 3.9.3 [ OK ]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 19 May 2013 22:56:49 +0000 (00:56 +0200)]
backports: add CPTCFG_CFG80211_WEXT
Without wext support we will get lots of complains about iwconfig
not working.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 19 May 2013 22:56:48 +0000 (00:56 +0200)]
backports: add defconfig for broadcom drivers
This adds a default config for the broadcom wifi drivers.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 19 May 2013 22:20:51 +0000 (00:20 +0200)]
backport: refresh patches on next-
20130513
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 19 May 2013 22:20:50 +0000 (00:20 +0200)]
backport: make patch apply again
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Sun, 19 May 2013 22:20:49 +0000 (00:20 +0200)]
backport: do not add the vlan backports for kernel 3.10
The kernel 3.10 already includes the new versions.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Larry Finger [Sun, 19 May 2013 16:43:56 +0000 (11:43 -0500)]
backports: defconfig for rtlwifi family
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Larry Finger [Sun, 19 May 2013 16:43:55 +0000 (11:43 -0500)]
backports: Fix menuconfig build
Using openSUSE 12.3 with x86_64 architecture, the 'make menuconfig'
command results in the following:
finger@larrylap:~/backports-3.10-rc1-1> make menuconfig
cc -Wl,--no-as-needed -lncurses mconf.o zconf.tab.o lxdialog/checklist.o lxdialog/inputbox.o lxdialog/menubox.o lxdialog/textbox.o lxdialog/util.o lxdialog/yesno.o -o mconf
/usr/lib64/gcc/x86_64-suse-linux/4.7/../../../../x86_64-suse-linux/bin/ld: /lib64/libncurses.so.5: undefined reference to symbol 'acs_map'
/usr/lib64/gcc/x86_64-suse-linux/4.7/../../../../x86_64-suse-linux/bin/ld: note: 'acs_map' is defined in DSO /usr/lib64/gcc/x86_64-suse-linux/4.7/../../../../lib64/libtinfo.so so try adding it to the linker command line
/usr/lib64/gcc/x86_64-suse-linux/4.7/../../../../lib64/libtinfo.so: could not read symbols: Invalid operation
collect2: error: ld returned 1 exit status
make[2]: *** [mconf] Error 1
make[1]: *** [menuconfig] Error 2
make: *** [menuconfig] Error 2
finger@larrylap:~/backports-3.10-rc1-1>
When "-ltinfo" is added to the LDFLAGS symbol as suggested by the linker,
it builds and runs correctly.
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.76 [ OK ]
18 3.1.10 [ OK ]
19 3.2.44 [ OK ]
20 3.3.8 [ OK ]
21 3.4.43 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.10 [ OK ]
25 3.8.11 [ OK ]
26 3.9.0 [ OK ]
real 17m9.368s
user 403m46.554s
sys 95m42.811s
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
[mcgrof: tested with ckmake]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Johannes Berg [Fri, 17 May 2013 12:12:06 +0000 (14:12 +0200)]
backport: remove redundant copy-list entries
Directory copying is recursive, so there's no need
to list subdirectories. All atheros ethernet drivers
are copied, so don't list them one by one. The same
is true for the Bluetooth include files.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luis R. Rodriguez [Fri, 17 May 2013 11:00:45 +0000 (04:00 -0700)]
backports: refresh patches for next-
20130501
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.76 [ OK ]
18 3.1.10 [ OK ]
19 3.2.44 [ OK ]
20 3.3.8 [ OK ]
21 3.4.43 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.10 [ OK ]
25 3.8.11 [ OK ]
26 3.9.0 [ OK ]
real 30m46.042s
user 816m2.488s
sys 126m33.079s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luis R. Rodriguez [Fri, 17 May 2013 11:00:44 +0000 (04:00 -0700)]
backports: refresh patches for next-
20130430
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.76 [ OK ]
18 3.1.10 [ OK ]
19 3.2.44 [ OK ]
20 3.3.8 [ OK ]
21 3.4.43 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.10 [ OK ]
25 3.8.11 [ OK ]
26 3.9.0 [ OK ]
real 30m45.327s
user 814m25.678s
sys 128m22.341s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luis R. Rodriguez [Fri, 17 May 2013 11:00:43 +0000 (04:00 -0700)]
backports: address NFC LLCP code shift
Samuel folded code under net/nfc/llcp/ onto
the parent net/nfc/ directory with llcp_ prefixes
for the files. Address this change introduced
as of next-
20130430.
commit
30cc4587659e1c9b1bfade8b2a757d91e04758ab
Author: Samuel Ortiz <sameo@linux.intel.com>
Date: Fri Apr 26 11:49:40 2013 +0200
NFC: Move LLCP code to the NFC top level diirectory
And stop making it optional. LLCP is a fundamental part of the NFC
specifications and making it optional does not make much sense.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luis R. Rodriguez [Thu, 16 May 2013 22:30:04 +0000 (15:30 -0700)]
backports: refresh patches for next-
20130429
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.76 [ OK ]
18 3.1.10 [ OK ]
19 3.2.44 [ OK ]
20 3.3.8 [ OK ]
21 3.4.43 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.10 [ OK ]
25 3.8.11 [ OK ]
26 3.9.0 [ OK ]
real 30m48.875s
user 815m54.307s
sys 127m12.229s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luis R. Rodriguez [Thu, 16 May 2013 22:30:03 +0000 (15:30 -0700)]
backports: address nouveau file shuffling
The recent file shuffling on nouveau requires some
changes not upstream to get it to compile to ensure
some objects do get interpreted as requiring the
new search path.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luis R. Rodriguez [Thu, 16 May 2013 08:23:29 +0000 (01:23 -0700)]
backports: add proc_set_size() and proc_set_user()
mcgrof@frijol ~/linux-stable (git::master)$ git describe --contains
271a15ea
v3.10-rc1~129^2~24
commit
271a15eabe094538d958dc68ccfc9c36b699247a
Author: David Howells <dhowells@redhat.com>
Date: Fri Apr 12 00:38:51 2013 +0100
proc: Supply PDE attribute setting accessor functions
Supply accessor functions to set attributes in proc_dir_entry structs.
The following are supplied: proc_set_size() and proc_set_user().
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
cc: linuxppc-dev@lists.ozlabs.org
cc: linux-media@vger.kernel.org
cc: netdev@vger.kernel.org
cc: linux-wireless@vger.kernel.org
cc: linux-pci@vger.kernel.org
cc: netfilter-devel@vger.kernel.org
cc: alsa-devel@alsa-project.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luis R. Rodriguez [Thu, 16 May 2013 08:23:28 +0000 (01:23 -0700)]
backports: add PDE_DATA() case when CONFIG_PROC_FS is disabled
This was missing.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luis R. Rodriguez [Thu, 16 May 2013 08:23:27 +0000 (01:23 -0700)]
backports: revert remove_proc_subtree() for backport
Intorduced in next-
20130429 and Linus has merged it
onto v3.10-rc1. We cannot backport remove_proc_subtree()
modularly [0] so just go ahead and revert this change.
The alternative is to go and review each procfs usage
for each driver we have issues and see if it makes
sense to replace procs with debugfs upstream.
commit
8ce584c7416d8a85a6f3edc17d1cddefe331e87e
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat Mar 30 20:13:46 2013 -0400
procfs: add proc_remove_subtree()
just what it sounds like; do that only to procfs subtrees you've
created - doing that to something shared with another driver is
not only antisocial, but might cause interesting races with
proc_create() and its ilk.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[0] http://marc.info/?t=
136841961600002&r=1&w=2
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Fri, 17 May 2013 09:18:46 +0000 (11:18 +0200)]
gentree: refuse patches creating files
This doesn't make sense since we'd have no way of knowing
when such a patch should be applied. Right now the patch
would be ignored, but make it extra obvious and error out
on such patches.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Thu, 16 May 2013 10:28:38 +0000 (12:28 +0200)]
backports: fix rfkill sparse warning
The new backport rfkill approach caused a sparse warning:
linux/rfkill.h:70:43: warning: mixing different enum types
linux/rfkill.h:70:43: int enum rfkill_type versus
linux/rfkill.h:70:43: int enum old_rfkill_type
Fix it by adding a cast.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luis R. Rodriguez [Mon, 13 May 2013 10:24:35 +0000 (03:24 -0700)]
backports: refresh patches for next-
20130426
== ckmake-report.log ==
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.76 [ OK ]
18 3.1.10 [ OK ]
19 3.2.44 [ OK ]
20 3.3.8 [ OK ]
21 3.4.43 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.10 [ OK ]
25 3.8.11 [ OK ]
26 3.9.0 [ OK ]
real 30m52.106s
user 816m17.749s
sys 127m27.702s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luis R. Rodriguez [Mon, 13 May 2013 10:24:34 +0000 (03:24 -0700)]
backports: refresh patches for next-
20130424
== ckmake-report.log ==
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.76 [ OK ]
18 3.1.10 [ OK ]
19 3.2.44 [ OK ]
20 3.3.8 [ OK ]
21 3.4.43 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.10 [ OK ]
25 3.8.11 [ OK ]
26 3.9.0 [ OK ]
real 30m48.012s
user 814m18.301s
sys 127m38.575s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luis R. Rodriguez [Mon, 13 May 2013 10:24:33 +0000 (03:24 -0700)]
backports: add support for regulator_map_voltage_ascend()
This is required by some drivers as of next-
20130424.
commit
fcf371ee5624cc87abac205cd0dad2432d7f0346
Author: Axel Lin <axel.lin@ingics.com>
Date: Thu Apr 18 10:34:49 2013 +0800
regulator: core: Add regulator_map_voltage_ascend() API
A lot of regulator hardware has ascendant voltage list.
This patch adds regulator_map_voltage_ascend() and export it.
Drivers that have ascendant voltage list can use this as their map_voltage()
operation, this is more efficient than default regulator_map_voltage_iterate()
function.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luis R. Rodriguez [Sat, 11 May 2013 18:54:29 +0000 (11:54 -0700)]
backports: refresh patches for next-
20130423
== ckmake-report.log ==
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.76 [ OK ]
18 3.1.10 [ OK ]
19 3.2.44 [ OK ]
20 3.3.8 [ OK ]
21 3.4.43 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.10 [ OK ]
25 3.8.11 [ OK ]
26 3.9.0 [ OK ]
real 30m53.044s
user 815m38.362s
sys 127m50.187s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luis R. Rodriguez [Sat, 11 May 2013 18:54:28 +0000 (11:54 -0700)]
backports: address vlan ethernet driver changes
This addresses the last remaining components to
backport the ethernet vlan changes introduced by
9356b8fc d314774c and
f646968f8f on next-
20130423.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luis R. Rodriguez [Sat, 11 May 2013 18:54:27 +0000 (11:54 -0700)]
backports: backport vlan ethernet changes
This backports
9356b8fc d314774c and
f646968f8f
all added in next-
20130423. Soome driver changes are
still required and will be addressed separately.
commit
9356b8fc07dc126cd91d2b12f314d760ab48996e
Author: Eric Dumazet <dada1@cosmosbay.com>
Date: Tue Sep 27 15:23:16 2005 -0700
[NET]: Reorder some hot fields of struct net_device
Place them on separate cache lines in SMP to lower memory bouncing
between multiple CPU accessing the device.
- One part is mostly used on receive path (including
eth_type_trans()) (poll_list, poll, quota, weight, last_rx,
dev_addr, broadcast)
- One part is mostly used on queue transmit path (qdisc)
(queue_lock, qdisc, qdisc_sleeping, qdisc_list, tx_queue_len)
- One part is mostly used on xmit path (device)
(xmit_lock, xmit_lock_owner, priv, hard_start_xmit, trans_start)
'features' is placed outside of these hot points, in a location that
may be shared by all cpus (because mostly read)
name_hlist is moved close to name[IFNAMSIZ] to speedup __dev_get_by_name()
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit
d314774cf2cd5dfeb39a00d37deee65d4c627927
Author: Stephen Hemminger <shemminger@vyatta.com>
Date: Wed Nov 19 21:32:24 2008 -0800
netdev: network device operations infrastructure
This patch changes the network device internal API to move adminstrative
operations out of the network device structure and into a separate structure.
This patch involves some hackery to maintain compatablity between the
new and old model, so all 300+ drivers don't have to be changed at once.
For drivers that aren't converted yet, the netdevice_ops virt function list
still resides in the net_device structure. For old protocols, the new
net_device_ops are copied out to the old net_device pointers.
After the transistion is completed the nag message can be changed to
an WARN_ON, and the compatiablity code can be made configurable.
Some function pointers aren't moved:
* destructor can't be in net_device_ops because
it may need to be referenced after the module is unloaded.
* neighbor setup is manipulated in a couple of places that need special
consideration
* hard_start_xmit is in the fast path for transmit.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit
f646968f8f7c624587de729115d802372b9063dd
Author: Patrick McHardy <kaber@trash.net>
Date: Fri Apr 19 02:04:27 2013 +0000
net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*
Rename the hardware VLAN acceleration features to include "CTAG" to indicate
that they only support CTAGs. Follow up patches will introduce 802.1ad
server provider tagging (STAGs) and require the distinction for hardware not
supporting acclerating both.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Sat, 11 May 2013 18:54:26 +0000 (11:54 -0700)]
backports: adjust snd_portid patch for nl80211 update
The new code for the "critical protocol indication" uses
snd_portid and must be adjusted in the backport patches.
This is required as of next-
20130423.
commit
5de17984898c5758fc6ebe08eccea9f4b6548914
Author: Arend van Spriel <arend@broadcom.com>
Date: Thu Apr 18 15:49:00 2013 +0200
cfg80211: introduce critical protocol indication from user-space
Some protocols need a more reliable connection to complete
successful in reasonable time. This patch adds a user-space
API to indicate the wireless driver that a critical protocol
is about to commence and when it is done, using nl80211 primitives
NL80211_CMD_CRIT_PROTOCOL_START and NL80211_CRIT_PROTOCOL_STOP.
There can be only on critical protocol session started per
registered cfg80211 device.
The driver can support this by implementing the cfg80211 callbacks
.crit_proto_start() and .crit_proto_stop(). Examples of protocols
that can benefit from this are DHCP, EAPOL, APIPA. Exactly how the
link can/should be made more reliable is up to the driver. Things
to consider are avoid scanning, no multi-channel operations, and
alter coexistence schemes.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[mcgrof@do-not-panic.com]: Required as of next-
20130423
and provided commit log message that introduced this
change.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Tue, 14 May 2013 20:10:39 +0000 (22:10 +0200)]
backports: move vb2_mmap_pfn_range into patch
There's only a single user of vb2_mmap_pfn_range() and
at least on 3.2 having the function in compat-3.9.c is
problematic if CPTCFG_BACKPORT_BUILD_DMA_SHARED_BUFFER
isn't set, because on that kernel there's no dma-buf.h
and then compilation can fail.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Tue, 14 May 2013 19:07:43 +0000 (21:07 +0200)]
backports: don't backport rfkill, only API
There's not much point in backporting rfkill, if the base kernel
doesn't have it then providing the it as /dev/rfkill_backport
won't be picked up by any apps, and if the base kernel has it
then it would cause odd behaviour as the base kernel's platform
drivers using the rfkill API would not talk to the backported
modules rfkill.
An unusable backported rfkill isn't much better than not having
it at all, so change the way we backport rfkill and don't carry
the code but simply provide the API as wrappers.
If the base kernel is 3.10 or higher (the current version) then
don't change anything at all.
If the base kernel is 2.6.33 or higher (with the new rfkill API)
then just wrap the API and disable rfkill registrations for any
types that the base kernel doesn't know about.
For all other kernels, provide only static inlines that behave
like the rfkill API when rfkill isn't compiled in.
The downside is that we need to copy the rfkill API. This is,
however, very very stable (it essentially hasn't changed since
2.6.33), so that's not a problem.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Emmanuel Grumbach [Tue, 14 May 2013 09:22:13 +0000 (12:22 +0300)]
backports: provide modules_install target
Just as an alias for 'install'.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luis R. Rodriguez [Tue, 14 May 2013 06:35:23 +0000 (23:35 -0700)]
backports: make compat module use subsys_initcall()
This is a no-op for the modular use case of the
backports project but by enabling this it allows
for developers a way to embed the backports releases
onto a target source Linux directory, with obvious
pending modifications, by adding our backport_init()
onto the target kernel's init/main.c start_kernel().
Enable this theoretical use case. Hackers welcome to
go play on this theoretical integration strategy now.
Cc: pstew@chromium.org
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
projects / openwrt / staging / blogic.git / log