openwrt/staging/blogic.git
14 years agox86-64: Only set max_pfn_mapped to 512 MiB if we enter via head_64.S
Jeremy Fitzhardinge [Wed, 13 Oct 2010 23:34:15 +0000 (16:34 -0700)]
x86-64: Only set max_pfn_mapped to 512 MiB if we enter via head_64.S

head_64.S maps up to 512 MiB, but that is not necessarity true for
other entry paths, such as Xen.

Thus, co-locate the setting of max_pfn_mapped with the code to
actually set up the page tables in head_64.S.  The 32-bit code is
already so co-located.  (The Xen code already sets max_pfn_mapped
correctly for its own use case.)

-v2:

 Yinghai fixed the following bug in this patch:

 |
 | max_pfn_mapped is in .bss section, so we need to set that
 | after bss get cleared. Without that we crash on bootup.
 |
 | That is safe because Xen does not call x86_64_start_kernel().
 |

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Fixed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <4CB6AB24.9020504@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
14 years agoxen: Cope with unmapped pages when initializing kernel pagetable
Jeremy Fitzhardinge [Wed, 13 Oct 2010 23:02:24 +0000 (16:02 -0700)]
xen: Cope with unmapped pages when initializing kernel pagetable

Xen requires that all pages containing pagetable entries to be mapped
read-only.  If pages used for the initial pagetable are already mapped
then we can change the mapping to RO.  However, if they are initially
unmapped, we need to make sure that when they are later mapped, they
are also mapped RO.

We do this by knowing that the kernel pagetable memory is pre-allocated
in the range e820_table_start - e820_table_end, so any pfn within this
range should be mapped read-only.  However, the pagetable setup code
early_ioremaps the pages to write their entries, so we must make sure
that mappings created in the early_ioremap fixmap area are mapped RW.
(Those mappings are removed before the pages are presented to Xen
as pagetable pages.)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
LKML-Reference: <4CB63A80.8060702@goop.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
14 years agomemblock, bootmem: Round pfn properly for memory and reserved regions
Yinghai Lu [Tue, 12 Oct 2010 21:07:09 +0000 (14:07 -0700)]
memblock, bootmem: Round pfn properly for memory and reserved regions

We need to round memory regions correctly -- specifically, we need to
round reserved region in the more expansive direction (lower limit
down, upper limit up) whereas usable memory regions need to be rounded
in the more restrictive direction (lower limit up, upper limit down).

This introduces two set of inlines:

memblock_region_memory_base_pfn()
memblock_region_memory_end_pfn()
memblock_region_reserved_base_pfn()
memblock_region_reserved_end_pfn()

Although they are antisymmetric (and therefore are technically
duplicates) the use of the different inlines explicitly documents the
programmer's intention.

The lack of proper rounding caused a bug on ARM, which was then found
to also affect other architectures.

Reported-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CB4CDFD.4020105@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
14 years agoMerge branch 'x86/urgent' into core/memblock
H. Peter Anvin [Tue, 12 Oct 2010 00:05:11 +0000 (17:05 -0700)]
Merge branch 'x86/urgent' into core/memblock

Reason for merge:

Forward-port urgent change to arch/x86/mm/srat_64.c to the memblock tree.

Resolved Conflicts:
arch/x86/mm/srat_64.c

Originally-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
14 years agomemblock: Annotate memblock functions with __init_memblock
Yinghai Lu [Mon, 11 Oct 2010 19:34:09 +0000 (12:34 -0700)]
memblock: Annotate memblock functions with __init_memblock

Stephen found

WARNING: mm/built-in.o(.text+0x25ab8): Section mismatch in reference from the function memblock_find_base() to the function .init.text:memblock_find_region()
The function memblock_find_base() references
the function __init memblock_find_region().
This is often because memblock_find_base lacks a __init
annotation or the annotation of memblock_find_region is wrong.

So let memblock_find_region() to use __init_memblock instead of __init
directly.

Also fix one function that did not have __init* to be __init_memblock.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CB366B1.40405@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
14 years agomemblock: Allow memblock_init to be called early
Jeremy Fitzhardinge [Wed, 6 Oct 2010 22:52:29 +0000 (15:52 -0700)]
memblock: Allow memblock_init to be called early

The Xen setup code needs to call memblock_x86_reserve_range() very early,
so allow it to initialize the memblock subsystem before doing so.  The
second memblock_init() is ignored.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
LKML-Reference: <4CACFDAD.3090900@goop.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
14 years agox86, numa: For each node, register the memory blocks actually used
Yinghai Lu [Mon, 11 Oct 2010 02:52:15 +0000 (19:52 -0700)]
x86, numa: For each node, register the memory blocks actually used

Russ reported SGI UV is broken recently. He said:

| The SRAT table shows that memory range is spread over two nodes.
|
| SRAT: Node 0 PXM 0 100000000-800000000
| SRAT: Node 1 PXM 1 800000000-1000000000
| SRAT: Node 0 PXM 0 1000000000-1080000000
|
|Previously, the kernel early_node_map[] would show three entries
|with the proper node.
|
|[    0.000000]     0: 0x00100000 -> 0x00800000
|[    0.000000]     1: 0x00800000 -> 0x01000000
|[    0.000000]     0: 0x01000000 -> 0x01080000
|
|The problem is recent community kernel early_node_map[] shows
|only two entries with the node 0 entry overlapping the node 1
|entry.
|
|    0: 0x00100000 -> 0x01080000
|    1: 0x00800000 -> 0x01000000

After looking at the changelog, Found out that it has been broken for a while by
following commit

|commit 8716273caef7f55f39fe4fc6c69c5f9f197f41f1
|Author: David Rientjes <rientjes@google.com>
|Date:   Fri Sep 25 15:20:04 2009 -0700
|
|    x86: Export srat physical topology

Before that commit, register_active_regions() is called for every SRAT memory
entry right away.

Use nodememblk_range[] instead of nodes[] in order to make sure we
capture the actual memory blocks registered with each node.  nodes[]
contains an extended range which spans all memory regions associated
with a node, but that does not mean that all the memory in between are
included.

Reported-by: Russ Anderson <rja@sgi.com>
Tested-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CB27BDF.5000800@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org> 2.6.33 .34 .35 .36
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
14 years agox86, AMD, MCE thresholding: Fix the MCi_MISCj iteration order
Borislav Petkov [Fri, 8 Oct 2010 10:08:34 +0000 (12:08 +0200)]
x86, AMD, MCE thresholding: Fix the MCi_MISCj iteration order

This fixes possible cases of not collecting valid error info in
the MCE error thresholding groups on F10h hardware.

The current code contains a subtle problem of checking only the
Valid bit of MSR0000_0413 (which is MC4_MISC0 - DRAM
thresholding group) in its first iteration and breaking out if
the bit is cleared.

But (!), this MSR contains an offset value, BlkPtr[31:24], which
points to the remaining MSRs in this thresholding group which
might contain valid information too. But if we bail out only
after we checked the valid bit in the first MSR and not the
block pointer too, we miss that other information.

The thing is, MC4_MISC0[BlkPtr] is not predicated on
MCi_STATUS[MiscV] or MC4_MISC0[Valid] and should be checked
prior to iterating over the MCI_MISCj thresholding group,
irrespective of the MC4_MISC0[Valid] setting.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
14 years agox86, mce, therm_throt.c: Fix missing curly braces in error handling logic
Jin Dongming [Thu, 26 Aug 2010 08:29:05 +0000 (17:29 +0900)]
x86, mce, therm_throt.c: Fix missing curly braces in error handling logic

When the feature PTS is not supported by CPU, the sysfile
package_power_limit_count for package should not be
generated.

This patch is used for fixing missing { and }.

The patch is not complete as there are other error handling
problems in this function - but that can wait until the
merge window.

Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@initel.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: Brown Len <len.brown@intel.com>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: lm-sensors@lm-sensors.org <lm-sensors@lm-sensors.org>
LKML-Reference: <4C7625D1.4060201@np.css.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
14 years agoMerge commit 'v2.6.36-rc7' into core/memblock
Ingo Molnar [Fri, 8 Oct 2010 07:14:51 +0000 (09:14 +0200)]
Merge commit 'v2.6.36-rc7' into core/memblock

Merge reason: Update from -rc3 to -rc7.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
14 years agomemblock/arm: Fix memblock_region_is_memory() typo
Yinghai Lu [Wed, 6 Oct 2010 04:28:10 +0000 (21:28 -0700)]
memblock/arm: Fix memblock_region_is_memory() typo

Fix typo in commit dbe3039 ("memblock/arm: Use memblock_region_is_memory()
for omap fb") - it should be memblock_is_region_memory().

Reported-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: ext Grazvydas Ignotas <notasas@gmail.com>
LKML-Reference: <4CABFADA.9020305@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
14 years agoMerge branch 'hwpoison-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ak...
Linus Torvalds [Thu, 7 Oct 2010 20:59:32 +0000 (13:59 -0700)]
Merge branch 'hwpoison-fixes' of git://git./linux/kernel/git/ak/linux-mce-2.6

* 'hwpoison-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6:
  HWPOISON: Stop shrinking at right page count
  HWPOISON: Report correct address granuality for AO huge page errors
  HWPOISON: Copy si_addr_lsb to user
  page-types.c: fix name of unpoison interface

14 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Thu, 7 Oct 2010 20:54:56 +0000 (13:54 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  elevator: fix oops on early call to elevator_change()

14 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Thu, 7 Oct 2010 20:50:48 +0000 (13:50 -0700)]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: check return code of read_sb_page
  md/raid1: minor bio initialisation improvements.
  md/raid1:  avoid overflow in raid1 resync when bitmap is in use.

14 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Thu, 7 Oct 2010 20:47:20 +0000 (13:47 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: don't drop handle reference on unload
  drm/ttm: Fix two race conditions + fix busy codepaths

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Thu, 7 Oct 2010 20:46:33 +0000 (13:46 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - fix runtime PM related deadlock
  Input: joydev - fix JSIOCSAXMAP ioctl
  Input: uinput - setup MT usage during device creation

14 years agoMerge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Thu, 7 Oct 2010 20:45:26 +0000 (13:45 -0700)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: properly account for reclaimed inodes

14 years agoMerge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Thu, 7 Oct 2010 20:45:00 +0000 (13:45 -0700)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (37 commits)
  V4L/DVB: v4l: radio: si470x: fix unneeded free_irq() call
  V4L/DVB: v4l: videobuf: prevent passing a NULL to dma_free_coherent()
  V4L/DVB: ir-core: Fix null dereferences in the protocols sysfs interface
  V4L/DVB: v4l: s5p-fimc: Fix 3-planar formats handling and pixel offset error on S5PV210 SoCs
  V4L/DVB: v4l: s5p-fimc: Fix return value on probe() failure
  V4L/DVB: uvcvideo: Restrict frame rates for Chicony CNF7129 webcam
  V4L/DVB: uvcvideo: Fix support for Medion Akoya All-in-one PC integrated webcam
  V4L/DVB: ivtvfb: prevent reading uninitialized stack memory
  V4L/DVB: cx25840: Fix typo in volume control initialization: 65335 vs. 65535
  V4L/DVB: v4l: mem2mem_testdev: add missing release for video_device
  V4L/DVB: v4l: mem2mem_testdev: fix errorenous comparison
  V4L/DVB: mt9v022.c: Fixed compilation warning
  V4L/DVB: mt9m111: added current colorspace at g_fmt
  V4L/DVB: mt9m111: cropcap and s_crop check if type is VIDEO_CAPTURE
  V4L/DVB: mx2_camera: fix a race causing NULL dereference
  V4L/DVB: tm6000: bugfix data handling
  V4L/DVB: gspca - sn9c20x: Bad transfer size of Bayer images
  V4L/DVB: videobuf-dma-sg: set correct size in last sg element
  V4L/DVB: cx231xx: Avoid an OOPS when card is unknown (card=0)
  V4L/DVB: dvb: fix smscore_getbuffer() logic
  ...

14 years agoMerge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvar...
Linus Torvalds [Thu, 7 Oct 2010 20:44:30 +0000 (13:44 -0700)]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  of/i2c: Fix module load order issue caused by of_i2c.c
  i2c: Fix checks which cause legacy suspend to never get called
  i2c-pca: Fix waitforcompletion() return value
  i2c: Fix for suspend/resume issue
  i2c: Remove obsolete cleanup for clientdata

14 years agosysctl: fix min/max handling in __do_proc_doulongvec_minmax()
Eric Dumazet [Thu, 7 Oct 2010 19:59:29 +0000 (12:59 -0700)]
sysctl: fix min/max handling in __do_proc_doulongvec_minmax()

When proc_doulongvec_minmax() is used with an array of longs, and no
min/max check requested (.extra1 or .extra2 being NULL), we dereference a
NULL pointer for the second element of the array.

Noticed while doing some changes in network stack for the "16TB problem"

Fix is to not change min & max pointers in __do_proc_doulongvec_minmax(),
so that all elements of the vector share an unique min/max limit, like
proc_dointvec_minmax().

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: add Samsung S5P series FIMC maintainers
Kyungmin Park [Thu, 7 Oct 2010 19:59:28 +0000 (12:59 -0700)]
MAINTAINERS: add Samsung S5P series FIMC maintainers

Add Samsung S5P series FIMC(Camera Interface) maintainers.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: Haavard has moved
Andrew Morton [Thu, 7 Oct 2010 19:59:28 +0000 (12:59 -0700)]
MAINTAINERS: Haavard has moved

Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomemcg: fix thresholds with use_hierarchy == 1
Kirill A. Shutemov [Thu, 7 Oct 2010 19:59:27 +0000 (12:59 -0700)]
memcg: fix thresholds with use_hierarchy == 1

We need to check parent's thresholds if parent has use_hierarchy == 1 to
be sure that parent's threshold events will be triggered even if parent
itself is not active (no MEM_CGROUP_EVENTS).

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomm: alloc_large_system_hash() printk overflow on 16TB boot
Robin Holt [Thu, 7 Oct 2010 19:59:26 +0000 (12:59 -0700)]
mm: alloc_large_system_hash() printk overflow on 16TB boot

During boot of a 16TB system, the following is printed:
Dentry cache hash table entries: -2147483648 (order: 22, 17179869184 bytes)

Signed-off-by: Robin Holt <holt@sgi.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoHWPOISON: Stop shrinking at right page count
Andi Kleen [Tue, 28 Sep 2010 05:37:55 +0000 (07:37 +0200)]
HWPOISON: Stop shrinking at right page count

When we call the slab shrinker to free a page we need to stop at
page count one because the caller always holds a single reference, not zero.

This avoids useless looping over slab shrinkers and freeing too much
memory.

Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
14 years agoHWPOISON: Report correct address granuality for AO huge page errors
Andi Kleen [Mon, 27 Sep 2010 20:03:33 +0000 (22:03 +0200)]
HWPOISON: Report correct address granuality for AO huge page errors

The SIGBUS user space signalling is supposed to report the
address granuality of a corruption. Pass this information correctly
for huge pages by querying the hpage order.

Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
14 years agoHWPOISON: Copy si_addr_lsb to user
Andi Kleen [Mon, 27 Sep 2010 18:32:19 +0000 (20:32 +0200)]
HWPOISON: Copy si_addr_lsb to user

The original hwpoison code added a new siginfo field si_addr_lsb to
pass the granuality of the fault address to user space. Unfortunately
this field was never copied to user space. Fix this here.

I added explicit checks for the MCEERR codes to avoid having
to patch all potential callers to initialize the field.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
14 years agopage-types.c: fix name of unpoison interface
Naoya Horiguchi [Wed, 8 Sep 2010 01:19:41 +0000 (10:19 +0900)]
page-types.c: fix name of unpoison interface

The page-types utility still uses an out of date name for the
unpoison interface: debugfs:hwpoison/renew-pfn
This patch renames and fixes it.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
14 years agoelevator: fix oops on early call to elevator_change()
Jens Axboe [Thu, 7 Oct 2010 07:35:16 +0000 (09:35 +0200)]
elevator: fix oops on early call to elevator_change()

2.6.36 introduces an API for drivers to switch the IO scheduler
instead of manually calling the elevator exit and init functions.
This API was added since q->elevator must be cleared in between
those two calls. And since we already have this functionality
directly from use by the sysfs interface to switch schedulers
online, it was prudent to reuse it internally too.

But this API needs the queue to be in a fully initialized state
before it is called, or it will attempt to unregister elevator
kobjects before they have been added. This results in an oops
like this:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000051
IP: [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0
PGD 47ddfc067 PUD 47c6a1067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/0000:04:00.1/irq
CPU 2
Modules linked in: t(+) loop hid_apple usbhid ahci ehci_hcd uhci_hcd libahci usbcore nls_base igb

Pid: 7319, comm: modprobe Not tainted 2.6.36-rc6+ #132 QSSC-S4R/QSSC-S4R
RIP: 0010:[<ffffffff8116f15e>]  [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0
RSP: 0018:ffff88027da25d08  EFLAGS: 00010246
RAX: ffff88047c68c528 RBX: 00000000fffffffe RCX: 0000000000000000
RDX: 000000000000002f RSI: 000000000000002f RDI: ffff88047e196c88
RBP: ffff88027da25d38 R08: 0000000000000000 R09: d84156c5635688c0
R10: d84156c5635688c0 R11: 0000000000000000 R12: ffff88047e196c88
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88047c68c528
FS:  00007fcb0b26f6e0(0000) GS:ffff880287400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000051 CR3: 000000047e76e000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 7319, threadinfo ffff88027da24000, task ffff88027d377090)
Stack:
 ffff88027da25d58 ffff88047c68c528 00000000fffffffe ffff88047e196c88
<0> ffff88047c68c528 ffff88047e05bd90 ffff88027da25d78 ffffffff8123fb77
<0> ffff88047e05bd90 0000000000000000 ffff88047e196c88 ffff88047c68c528
Call Trace:
 [<ffffffff8123fb77>] kobject_add_internal+0xe7/0x1f0
 [<ffffffff8123fd98>] kobject_add_varg+0x38/0x60
 [<ffffffff8123feb9>] kobject_add+0x69/0x90
 [<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0
 [<ffffffff8103d48d>] ? sub_preempt_count+0x9d/0xe0
 [<ffffffff8143de20>] ? _raw_spin_unlock+0x30/0x50
 [<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0
 [<ffffffff8116eff4>] ? sysfs_remove_dir+0x34/0xa0
 [<ffffffff81224204>] elv_register_queue+0x34/0xa0
 [<ffffffff81224aad>] elevator_change+0xfd/0x250
 [<ffffffffa007e000>] ? t_init+0x0/0x361 [t]
 [<ffffffffa007e000>] ? t_init+0x0/0x361 [t]
 [<ffffffffa007e0a8>] t_init+0xa8/0x361 [t]
 [<ffffffff810001de>] do_one_initcall+0x3e/0x170
 [<ffffffff8108c3fd>] sys_init_module+0xbd/0x220
 [<ffffffff81002f2b>] system_call_fastpath+0x16/0x1b
Code: e5 41 56 41 55 41 54 49 89 fc 53 48 83 ec 10 48 85 ff 74 52 48 8b 47 18 49 c7 c5 00 46 61 81 48 85 c0 74 04 4c 8b 68 30 45 31 f6 <41> 80 7d 51 00 74 0e 49 8b 44 24 28 4c 89 e7 ff 50 20 49 89 c6
RIP  [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0
 RSP <ffff88027da25d08>
CR2: 0000000000000051
---[ end trace a6541d3bf07945df ]---

Fix this by adding a registered bit to the elevator queue, which is
set when the sysfs kobjects have been registered.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
14 years agodrm: don't drop handle reference on unload
Dave Airlie [Thu, 7 Oct 2010 04:01:17 +0000 (14:01 +1000)]
drm: don't drop handle reference on unload

since the handle references are all tied to a file_priv, and when it disappears
all the handle refs go with it.

The fbcon ones we'd only notice on unload, but the nouveau notifier one
would would happen on reboot.

nouveau: Reported-by: Marc Dionne <marc.c.dionne@gmail.com>
nouveau: Tested-by: Marc Dionne <marc.c.dionne@gmail.com>
i915 unload: Reported-by: Keith Packard <keithp@keithp.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agoxfs: properly account for reclaimed inodes
Johannes Weiner [Fri, 1 Oct 2010 07:43:54 +0000 (07:43 +0000)]
xfs: properly account for reclaimed inodes

When marking an inode reclaimable, a per-AG counter is increased, the
inode is tagged reclaimable in its per-AG tree, and, when this is the
first reclaimable inode in the AG, the AG entry in the per-mount tree
is also tagged.

When an inode is finally reclaimed, however, it is only deleted from
the per-AG tree.  Neither the counter is decreased, nor is the parent
tree's AG entry untagged properly.

Since the tags in the per-mount tree are not cleared, the inode
shrinker iterates over all AGs that have had reclaimable inodes at one
point in time.

The counters on the other hand signal an increasing amount of slab
objects to reclaim.  Since "70e60ce xfs: convert inode shrinker to
per-filesystem context" this is not a real issue anymore because the
shrinker bails out after one iteration.

But the problem was observable on a machine running v2.6.34, where the
reclaimable work increased and each process going into direct reclaim
eventually got stuck on the xfs inode shrinking path, trying to scan
several million objects.

Fix this by properly unwinding the reclaimable-state tracking of an
inode when it is reclaimed.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: stable@kernel.org
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
14 years agomd: check return code of read_sb_page
Vasiliy Kulikov [Fri, 1 Oct 2010 21:18:12 +0000 (14:18 -0700)]
md: check return code of read_sb_page

Function read_sb_page may return ERR_PTR(...). Check for it.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NeilBrown <neilb@suse.de>
14 years agomd/raid1: minor bio initialisation improvements.
NeilBrown [Thu, 7 Oct 2010 01:00:50 +0000 (12:00 +1100)]
md/raid1: minor bio initialisation improvements.

When performing a resync we pre-allocate some bios and repeatedly use
them.  This requires us to re-initialise them each time.
One field (bi_comp_cpu) and some flags weren't being initiaised
reliably.

Signed-off-by: NeilBrown <neilb@suse.de>
14 years agomd/raid1: avoid overflow in raid1 resync when bitmap is in use.
NeilBrown [Thu, 7 Oct 2010 00:54:46 +0000 (11:54 +1100)]
md/raid1:  avoid overflow in raid1 resync when bitmap is in use.

bitmap_start_sync returns - via a pass-by-reference variable - the
number of sectors before we need to check with the bitmap again.
Since commit ef4256733506f245 this number can be substantially larger,
2^27 is a common value.

Unfortunately it is an 'int' and so when raid1.c:sync_request shifts
it 9 places to the left it becomes 0.  This results in a zero-length
read which the scsi layer justifiably complains about.

This patch just removes the shift so the common case becomes safe with
a trivially-correct patch.

In the next merge window we will convert this 'int' to a 'sector_t'

Reported-by: "George Spelvin" <linux@horizon.com>
Signed-off-by: NeilBrown <neilb@suse.de>
14 years agoLinux 2.6.36-rc7
Linus Torvalds [Wed, 6 Oct 2010 20:39:52 +0000 (13:39 -0700)]
Linux 2.6.36-rc7

14 years agoMerge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Wed, 6 Oct 2010 20:27:19 +0000 (13:27 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Octeon: Place cnmips_cu2_setup in __init memory.
  MIPS: Don't place cu2 notifiers in __cpuinitdata
  MIPS: Calculate VMLINUZ_LOAD_ADDRESS based on the length of vmlinux.bin
  MIPS: Alchemy: Resolve prom section mismatches
  MIPS: Fix syscall 64 bit number comments.
  MIPS: Hookup fanotify_init, fanotify_mark, and prlimit64 syscalls.
  MIPS: TX49xx: Rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
  MIPS: N32: Fix getdents64 syscall for n32
  MIPS: Remove pr_<level> uses of KERN_<level>
  MIPS: PNX8550: Sort out machine halt, restart and powerdown functions.
  MIPS: GIC: Remove dependencies from Malta files.
  MIPS: Kconfig: Fix and clarify kconfig help text for VSMP and SMTC.
  MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.
  MIPS: Audit: Fix hang in entry.S.
  MIPS: Document why RELOC_HIDE is there.
  MIPS: Octeon: Determine if helper needs to be built
  MIPS: Use generic atomic64 for 32-bit kernels
  MIPS: RM7000: Symbol should be static
  MIPS: kspd: Adjust confusing if indentation
  MIPS: Fix a typo.

14 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Wed, 6 Oct 2010 18:11:18 +0000 (11:11 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  writeback: always use sb->s_bdi for writeback purposes

14 years agoMerge branch 'v2.6.36-rc6-urgent-fixes' of git://xenbits.xen.org/people/sstabellini...
Linus Torvalds [Wed, 6 Oct 2010 16:51:28 +0000 (09:51 -0700)]
Merge branch 'v2.6.36-rc6-urgent-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm

* 'v2.6.36-rc6-urgent-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
  xen: do not initialize PV timers on HVM if !xen_have_vector_callback
  xen: do not set xenstored_ready before xenbus_probe on hvm

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi...
Linus Torvalds [Wed, 6 Oct 2010 16:50:41 +0000 (09:50 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: Initialize total_len in fuse_retrieve()

14 years agox86, memblock: Remove __memblock_x86_find_in_range_size()
Yinghai Lu [Mon, 4 Oct 2010 21:58:04 +0000 (14:58 -0700)]
x86, memblock: Remove __memblock_x86_find_in_range_size()

Fold it into memblock_x86_find_in_range(), and change bad_addr_size()
to check_reserve_memblock().

So whole memblock_x86_find_in_range_size() code is more readable.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CAA4DEC.4000401@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
14 years agomemblock: Fix wraparound in find_region()
Yinghai Lu [Mon, 4 Oct 2010 21:57:39 +0000 (14:57 -0700)]
memblock: Fix wraparound in find_region()

When trying to find huge range for crashkernel, get

[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/mm/memblock.c:248 memblock_x86_reserve_range+0x40/0x7a()
[    0.000000] Hardware name: Sun Fire x4800
[    0.000000] memblock_x86_reserve_range: wrong range [0xffffffff37000000, 0x137000000)
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.36-rc5-tip-yh-01876-g1cac214-dirty #59
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff82816f7e>] ? memblock_x86_reserve_range+0x40/0x7a
[    0.000000]  [<ffffffff81078c2d>] warn_slowpath_common+0x85/0x9e
[    0.000000]  [<ffffffff81078d38>] warn_slowpath_fmt+0x6e/0x70
[    0.000000]  [<ffffffff8281e77c>] ? memblock_find_region+0x40/0x78
[    0.000000]  [<ffffffff8281eb1f>] ? memblock_find_base+0x9a/0xb9
[    0.000000]  [<ffffffff82816f7e>] memblock_x86_reserve_range+0x40/0x7a
[    0.000000]  [<ffffffff8280452c>] setup_arch+0x99d/0xb2a
[    0.000000]  [<ffffffff810a3e02>] ? trace_hardirqs_off+0xd/0xf
[    0.000000]  [<ffffffff81cec7d8>] ? _raw_spin_unlock_irqrestore+0x3d/0x4c
[    0.000000]  [<ffffffff827ffcec>] start_kernel+0xde/0x3f1
[    0.000000]  [<ffffffff827ff2d4>] x86_64_start_reservations+0xa0/0xa4
[    0.000000]  [<ffffffff827ff3de>] x86_64_start_kernel+0x106/0x10d
[    0.000000] ---[ end trace a7919e7f17c0a725 ]---
[    0.000000] Reserving 8192MB of memory at 17592186041200MB for crashkernel (System RAM: 526336MB)

This is caused by a wraparound in the test due to size > end;
explicitly check for this condition and fail.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CAA4DD3.1080401@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
14 years agox86-32, memblock: Make add_highpages honor early reserved ranges
Yinghai Lu [Tue, 5 Oct 2010 23:15:15 +0000 (16:15 -0700)]
x86-32, memblock: Make add_highpages honor early reserved ranges

Originally the only early reserved range that is overlapped with high
pages is "KVA RAM", but we already do remove that from the active ranges.

However, It turns out Xen could have that kind of overlapping to support memory
ballooning.x

So we need to make add_highpage_with_active_regions() to subtract
memblock reserved just like low ram; this is the proper design anyway.

In this patch, refactering get_freel_all_memory_range() to make it can
be used by add_highpage_with_active_regions().  Also we don't need to
remove "KVA RAM" from active ranges.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CABB183.1040607@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
14 years agox86, memblock: Fix crashkernel allocation
Yinghai Lu [Tue, 5 Oct 2010 23:05:14 +0000 (16:05 -0700)]
x86, memblock: Fix crashkernel allocation

Cai Qian found crashkernel is broken with the x86 memblock changes.

1. crashkernel=128M@32M always reported that range is used, even if
   the first kernel is small and does not usethat range

2. we always got following report when using "kexec -p"
Could not find a free area of memory of a000 bytes...
locate_hole failed

The root cause is that generic memblock_find_in_range() will try to
allocate from the top of the range, whereas the kexec code was written
assuming that allocation was always near the bottom and that it could
blindly extend memory upward.  Unfortunately the kexec code doesn't
have a system for requesting the range that it really needs, so this
is subject to probabilistic failures.

This patch hacks around the problem by limiting the target range
heuristically to below the traditional bzImage max range.  This number
is arbitrary and not always correct, and a much better result would be
obtained by having kexec communicate this number based on the kernel
header information and any appropriate command line options.

Reported-and-Bisected-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CABAF2A.5090501@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
14 years agopowerpc: remove unused variable
Stephen Rothwell [Wed, 6 Oct 2010 00:06:44 +0000 (11:06 +1100)]
powerpc: remove unused variable

Since powerpc uses -Werror on arch powerpc, the build was broken like
this:

  cc1: warnings being treated as errors
  arch/powerpc/kernel/module.c: In function 'module_finalize':
  arch/powerpc/kernel/module.c:66: error: unused variable 'err'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agodrm/ttm: Fix two race conditions + fix busy codepaths
Thomas Hellstrom [Thu, 30 Sep 2010 10:36:45 +0000 (12:36 +0200)]
drm/ttm: Fix two race conditions + fix busy codepaths

This fixes a race pointed out by Dave Airlie where we don't take a buffer
object about to be destroyed off the LRU lists properly. It also fixes a rare
case where a buffer object could be destroyed in the middle of an
accelerated eviction.

The patch also adds a utility function that can be used to prematurely
release GPU memory space usage of an object waiting to be destroyed.
For example during eviction or swapout.

The above mentioned commit didn't queue the buffer on the delayed destroy
list under some rare circumstances. It also didn't completely honor the
remove_all parameter.

Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=615505
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=591061

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
14 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 5 Oct 2010 20:07:43 +0000 (13:07 -0700)]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: rcu_read_lock_bh_held(): disabling irqs also disables bh
  generic-ipi: Fix deadlock in __smp_call_function_single

14 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 5 Oct 2010 18:57:37 +0000 (11:57 -0700)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf trace scripting: Fix extern struct definitions
  perf ui hist browser: Fix segfault on 'a' for annotate
  perf tools: Fix build breakage
  perf, x86: Handle in flight NMIs on P4 platform
  oprofile, ARM: Release resources on failure
  oprofile: Add Support for Intel CPU Family 6 / Model 29

14 years agowait: using uninitialized member of wait queue
Evgeny Kuznetsov [Tue, 5 Oct 2010 08:47:57 +0000 (12:47 +0400)]
wait: using uninitialized member of wait queue

The "flags" member of "struct wait_queue_t" is used in several places in
the kernel code without beeing initialized by init_wait().  "flags" is
used in bitwise operations.

If "flags" not initialized then unexpected behaviour may take place.
Incorrect flags might used later in code.

Added initialization of "wait_queue_t.flags" with zero value into
"init_wait".

Signed-off-by: Evgeny Kuznetsov <EXT-Eugeny.Kuznetsov@nokia.com>
[ The bit we care about does end up being initialized by both
   prepare_to_wait() and add_to_wait_queue(), so this doesn't seem to
   cause actual bugs, but is definitely the right thing to do -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomodules: Fix module_bug_list list corruption race
Linus Torvalds [Tue, 5 Oct 2010 18:29:27 +0000 (11:29 -0700)]
modules: Fix module_bug_list list corruption race

With all the recent module loading cleanups, we've minimized the code
that sits under module_mutex, fixing various deadlocks and making it
possible to do most of the module loading in parallel.

However, that whole conversion totally missed the rather obscure code
that adds a new module to the list for BUG() handling.  That code was
doubly obscure because (a) the code itself lives in lib/bugs.c (for
dubious reasons) and (b) it gets called from the architecture-specific
"module_finalize()" rather than from generic code.

Calling it from arch-specific code makes no sense what-so-ever to begin
with, and is now actively wrong since that code isn't protected by the
module loading lock any more.

So this commit moves the "module_bug_{finalize,cleanup}()" calls away
from the arch-specific code, and into the generic code - and in the
process protects it with the module_mutex so that the list operations
are now safe.

Future fixups:
 - move the module list handling code into kernel/module.c where it
   belongs.
 - get rid of 'module_bug_list' and just use the regular list of modules
   (called 'modules' - imagine that) that we already create and maintain
   for other reasons.

Reported-and-tested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoxen: do not initialize PV timers on HVM if !xen_have_vector_callback
Stefano Stabellini [Fri, 1 Oct 2010 16:35:46 +0000 (17:35 +0100)]
xen: do not initialize PV timers on HVM if !xen_have_vector_callback

if !xen_have_vector_callback do not initialize PV timer unconditionally
because we still don't know how many cpus are available and if there is
more than one we won't be able to receive the timer interrupts on
cpu > 0.

This patch fixes an hang at boot when Xen does not support vector
callbacks and the guest has multiple vcpus.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
14 years agoxen: do not set xenstored_ready before xenbus_probe on hvm
Stefano Stabellini [Mon, 4 Oct 2010 15:10:06 +0000 (16:10 +0100)]
xen: do not set xenstored_ready before xenbus_probe on hvm

Register_xenstore_notifier should guarantee that the caller gets
notified even if xenstore is already up.
Therefore we revert "do not notify callers from
register_xenstore_notifier" and set xenstored_read at the right time for
PV on HVM guests too.
In fact in case of PV on HVM guests xenstored is ready only after the
platform pci driver has completed the initialization, so do not set
xenstored_ready before the call to xenbus_probe().

This patch fixes a shutdown_event watcher registration bug that causes
"xm shutdown" not to work properly.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
14 years agoInput: wacom - fix runtime PM related deadlock
Dmitry Torokhov [Tue, 5 Oct 2010 04:46:11 +0000 (21:46 -0700)]
Input: wacom - fix runtime PM related deadlock

When runtime PM is enabled by default for input devices, X hangs in
wacom open:
[<ffffffff814a00ea>] mutex_lock+0x1a/0x40
[<ffffffffa02bc94b>] wacom_resume+0x3b/0x90 [wacom]
[<ffffffff81327a32>] usb_resume_interface+0xd2/0x190
[<ffffffff81327b5d>] usb_resume_both+0x6d/0x110
[<ffffffff81327c24>] usb_runtime_resume+0x24/0x40
[<ffffffff8130a2cf>] __pm_runtime_resume+0x26f/0x450
[<ffffffff8130a23a>] __pm_runtime_resume+0x1da/0x450
[<ffffffff8130a53a>] pm_runtime_resume+0x2a/0x50
[<ffffffff81328176>] usb_autopm_get_interface+0x26/0x60
[<ffffffffa02bc626>] wacom_open+0x36/0x90 [wacom]

wacom_open() takes wacom->lock and calls usb_autopm_get_interface(),
which in turn calls wacom_resume() which tries to acquire the lock
again.

The fix is to call usb_autopm_get_interface() first, before we take
the lock.

Since we do not do usb_autopm_put_interface() until wacom_close()
is called runtime PM is effectively disabled for the driver, however
changing it now would risk regressions so the complete fix will
have to wait till the next merge window.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
Linus Torvalds [Mon, 4 Oct 2010 20:35:48 +0000 (13:35 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: max8649 - fix setting extclk_freq
  regulator: fix typo in current units
  regulator: fix device_register() error handling

14 years agoMerge branch 'merge-powerpc' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Mon, 4 Oct 2010 18:45:35 +0000 (11:45 -0700)]
Merge branch 'merge-powerpc' of git://git.secretlab.ca/git/linux-2.6

* 'merge-powerpc' of git://git.secretlab.ca/git/linux-2.6:
  powerpc/5200: tighten up ac97 reset timing
  powerpc/5200: efika.c: Add of_node_put to avoid memory leak
  powerpc/512x: fix clk_get() return value

14 years agoMerge branch 'fix/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Mon, 4 Oct 2010 18:15:59 +0000 (11:15 -0700)]
Merge branch 'fix/misc' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'fix/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: i2c/other/ak4xx-adda: Fix a compile warning with CONFIG_PROCFS=n
  ALSA: prevent heap corruption in snd_ctl_new()

14 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groec...
Linus Torvalds [Mon, 4 Oct 2010 18:15:06 +0000 (11:15 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: f71882fg: use a muxed resource lock for the Super I/O port

14 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Mon, 4 Oct 2010 18:14:21 +0000 (11:14 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix memory leaks in pcc_cpufreq_do_osc
  [CPUFREQ] acpi-cpufreq: add missing __percpu markup

14 years agoMerge branch 'merge-spi' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Mon, 4 Oct 2010 18:13:22 +0000 (11:13 -0700)]
Merge branch 'merge-spi' of git://git.secretlab.ca/git/linux-2.6

* 'merge-spi' of git://git.secretlab.ca/git/linux-2.6:
  of/spi: Fix OF-style driver binding of spi devices
  spi: spi-gpio.c tests SPI_MASTER_NO_RX bit twice, but not SPI_MASTER_NO_TX
  spi/mpc8xxx: fix buffer overrun on large transfers

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 4 Oct 2010 18:11:01 +0000 (11:11 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  vlan: dont drop packets from unknown vlans in promiscuous mode
  Phonet: Correct header retrieval after pskb_may_pull
  um: Proper Fix for f25c80a4: remove duplicate structure field initialization
  ip_gre: Fix dependencies wrt. ipv6.
  net-2.6: SYN retransmits: Add new parameter to retransmits_timed_out()
  iwl3945: queue the right work if the scan needs to be aborted
  mac80211: fix use-after-free

14 years agoMerge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle...
Linus Torvalds [Mon, 4 Oct 2010 18:10:26 +0000 (11:10 -0700)]
Merge branch 'drm-intel-fixes' of git://git./linux/kernel/git/ickle/drm-intel

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: Rephrase pwrite bounds checking to avoid any potential overflow
  drm/i915: Sanity check pread/pwrite
  drm/i915: Use pipe state to tell when pipe is off
  drm/i915: vblank status not valid while training display port
  drivers/gpu/drm/i915/i915_gem.c: Add missing error handling code
  drm/i915: Fix refleak during eviction.
  drm/i915: fix GMCH power reporting

14 years agoksm: fix bad user data when swapping
Hugh Dickins [Sun, 3 Oct 2010 00:49:08 +0000 (17:49 -0700)]
ksm: fix bad user data when swapping

Building under memory pressure, with KSM on 2.6.36-rc5, collapsed with
an internal compiler error: typically indicating an error in swapping.

Perhaps there's a timing issue which makes it now more likely, perhaps
it's just a long time since I tried for so long: this bug goes back to
KSM swapping in 2.6.33.

Notice how reuse_swap_page() allows an exclusive page to be reused, but
only does SetPageDirty if it can delete it from swap cache right then -
if it's currently under Writeback, it has to be left in cache and we
don't SetPageDirty, but the page can be reused.  Fine, the dirty bit
will get set in the pte; but notice how zap_pte_range() does not bother
to transfer pte_dirty to page_dirty when unmapping a PageAnon.

If KSM chooses to share such a page, it will look like a clean copy of
swapcache, and not be written out to swap when its memory is needed;
then stale data read back from swap when it's needed again.

We could fix this in reuse_swap_page() (or even refuse to reuse a
page under writeback), but it's more honest to fix my oversight in
KSM's write_protect_page().  Several days of testing on three machines
confirms that this fixes the issue they showed.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoksm: fix page_address_in_vma anon_vma oops
Hugh Dickins [Sun, 3 Oct 2010 00:46:06 +0000 (17:46 -0700)]
ksm: fix page_address_in_vma anon_vma oops

2.6.36-rc1 commit 21d0d443cdc1658a8c1484fdcece4803f0f96d0e "rmap:
resurrect page_address_in_vma anon_vma check" was right to resurrect
that check; but now that it's comparing anon_vma->roots instead of
just anon_vmas, there's a danger of oopsing on a NULL anon_vma.

In most cases no NULL anon_vma ever gets here; but it turns out that
occasionally KSM, when enabled on a forked or forking process, will
itself call page_address_in_vma() on a "half-KSM" page left over from
an earlier failed attempt to merge - whose page_anon_vma() is NULL.

It's my bug that those should be getting here at all: I thought they
were already dealt with, this oops proves me wrong, I'll fix it in
the next release - such pages are effectively pinned until their
process exits, since rmap cannot find their ptes (though swapoff can).

For now just work around it by making page_address_in_vma() safe (and
add a comment on why that check is wanted anyway).  A similar check
in __page_check_anon_rmap() is safe because do_page_add_anon_rmap()
already excluded KSM pages.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMIPS: Octeon: Place cnmips_cu2_setup in __init memory.
David Daney [Thu, 23 Sep 2010 18:24:09 +0000 (11:24 -0700)]
MIPS: Octeon: Place cnmips_cu2_setup in __init memory.

It is an early_initcall, so it should be in __init memory.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1593/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Don't place cu2 notifiers in __cpuinitdata
David Daney [Thu, 23 Sep 2010 18:23:29 +0000 (11:23 -0700)]
MIPS: Don't place cu2 notifiers in __cpuinitdata

The notifiers may be called at any time, so the notifier_block cannot
be in init memory.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1592/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Calculate VMLINUZ_LOAD_ADDRESS based on the length of vmlinux.bin
Shmulik Ladkani [Tue, 31 Aug 2010 10:24:19 +0000 (13:24 +0300)]
MIPS: Calculate VMLINUZ_LOAD_ADDRESS based on the length of vmlinux.bin

Fix VMLINUZ_LOAD_ADDRESS calculation to be based on the length of
vmlinux.bin, the actual uncompressed kernel binary.

Previously it was based on the length of KBUILD_IMAGE (the unstripped ELF
vmlinux), which is bigger than vmlinux.bin.  As a result, vmlinuz was
loaded into a memory address higher then actually needed - a problem for
small memory platforms.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
To: linux-mips@linux-mips.org
Cc: alex@digriz.org.uk
Cc: manuel.lauss@googlemail.com
Cc: sam@ravnborg.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1564/
Acked-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Alchemy: Resolve prom section mismatches
Manuel Lauss [Thu, 19 Aug 2010 11:37:13 +0000 (13:37 +0200)]
MIPS: Alchemy: Resolve prom section mismatches

The function prom_init_cmdline() references the variable __initdata
arcs_cmdline.

The function prom_get_ethernet_addr() references the variable __initdata
arcs_cmdline.

Annotate prom_init_cmdline() as __init, unexport and annotate
prom_get_ethernet_addr() since it's no longer called from within
driver code.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/1547/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Fix syscall 64 bit number comments.
Ralf Baechle [Mon, 20 Sep 2010 14:00:19 +0000 (15:00 +0100)]
MIPS: Fix syscall 64 bit number comments.

Noticed and original patch by Philby John <pjohn@mvista.com>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Hookup fanotify_init, fanotify_mark, and prlimit64 syscalls.
David Daney [Mon, 23 Aug 2010 21:10:37 +0000 (14:10 -0700)]
MIPS: Hookup fanotify_init, fanotify_mark, and prlimit64 syscalls.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1553/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: TX49xx: Rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
FUJITA Tomonori [Sat, 14 Aug 2010 07:02:37 +0000 (16:02 +0900)]
MIPS: TX49xx: Rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN

Architectures need to set ARCH_DMA_MINALIGN to the minimum DMA
alignment (commit a6eb9fe105d5de0053b261148cee56c94b4720ca). Defining
ARCH_KMALLOC_MINALIGN doesn't work anymore.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: anemo@mba.ocn.ne.jp
Patchwork: https://patchwork.linux-mips.org/patch/1544/
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: N32: Fix getdents64 syscall for n32
Bernhard Walle [Fri, 3 Sep 2010 08:15:34 +0000 (10:15 +0200)]
MIPS: N32: Fix getdents64 syscall for n32

Commit 31c984a5acabea5d8c7224dc226453022be46f33 introduced a new syscall
getdents64. However, in the syscall table, the new syscall still refers to
the old getdents which doesn't work.

The problem appeared with a system that uses the eglibc 2.12-r11187 (that
utilizes that new syscall) is very confused. The fix has been tested with
that eglibc version.

Signed-off-by: Bernhard Walle <walle@corscience.de>
To: linux-mips@linux-mips.org
Cc: ddaney@caviumnetworks.com
Cc: akpm@linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1567/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Remove pr_<level> uses of KERN_<level>
Joe Perches [Sun, 12 Sep 2010 05:10:52 +0000 (22:10 -0700)]
MIPS: Remove pr_<level> uses of KERN_<level>

These would result in KERN_<level> actually getting printed.

Signed-off-by: Joe Perches <joe@perches.com>
To: Jiri Kosina <trivial@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1581/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: PNX8550: Sort out machine halt, restart and powerdown functions.
Ralf Baechle [Sat, 18 Sep 2010 23:09:09 +0000 (00:09 +0100)]
MIPS: PNX8550: Sort out machine halt, restart and powerdown functions.

No rubbish printks - those belong to userspace.  The halt function now
actually halts the system and the poweroff function was deleted because
it didn't actually power down the system.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: GIC: Remove dependencies from Malta files.
Ralf Baechle [Fri, 17 Sep 2010 16:07:48 +0000 (17:07 +0100)]
MIPS: GIC: Remove dependencies from Malta files.

This prevents the GIC code from being reusable sanely.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Kconfig: Fix and clarify kconfig help text for VSMP and SMTC.
Ralf Baechle [Thu, 16 Sep 2010 10:40:41 +0000 (11:40 +0100)]
MIPS: Kconfig: Fix and clarify kconfig help text for VSMP and SMTC.

Only VSMP was known as SMVP and generally the help text was too short to
be helpful.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.
Ralf Baechle [Thu, 2 Sep 2010 21:22:23 +0000 (23:22 +0200)]
MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.

This only matters for ISA devices with a 24-bit DMA limit or for devices
with a 32-bit DMA limit on systems with ZONE_DMA32 enabled.  The latter
currently only affects 32-bit PCI cards on Sibyte-based systems with more
than 1GB RAM installed.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Audit: Fix hang in entry.S.
Ralf Baechle [Thu, 2 Sep 2010 20:59:58 +0000 (22:59 +0200)]
MIPS: Audit: Fix hang in entry.S.

_TIF_WORK_MASK false had _TIF_SYSCALL_AUDIT set.  If a thread's
_TIF_SYSCALL_AUDIT is ever set this will lead to an endless loop on the
way out from a syscall.

Currently this is only a theoretic bug as init/Kconfig doesn't allow
AUDIT_SYSCALL to be enabled for MIPS.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Document why RELOC_HIDE is there.
Ralf Baechle [Tue, 17 Aug 2010 15:01:59 +0000 (16:01 +0100)]
MIPS: Document why RELOC_HIDE is there.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Octeon: Determine if helper needs to be built
Andreas Bießmann [Wed, 11 Aug 2010 16:49:53 +0000 (18:49 +0200)]
MIPS: Octeon: Determine if helper needs to be built

This patch adds an config switch to determine if we need to build some
workaround helper files.

The staging driver octeon-ethernet references some symbols which are only
built when PCI is enabled. The new config switch enables these symbols in
bothe cases.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
To: linux-kernel@vger.kernel.org
Cc: Andreas Bießmann <biessmann@corscience.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1543/
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Use generic atomic64 for 32-bit kernels
Deng-Cheng Zhu [Wed, 9 Jun 2010 04:35:25 +0000 (12:35 +0800)]
MIPS: Use generic atomic64 for 32-bit kernels

The 64-bit kernel has already had its atomic64 functions. Except for that,
we use the generic spinlocked version. The atomic64 types and related
functions are needed for the Linux performance counter subsystem.

Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Patchwork: https://patchwork.linux-mips.org/patch/1361/
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: RM7000: Symbol should be static
Ricardo Mendoza [Fri, 6 Aug 2010 15:42:57 +0000 (11:12 -0430)]
MIPS: RM7000: Symbol should be static

Signed-off-by: Ricardo Mendoza <ricmm@gentoo.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1540/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: kspd: Adjust confusing if indentation
Julia Lawall [Thu, 5 Aug 2010 20:17:22 +0000 (22:17 +0200)]
MIPS: kspd: Adjust confusing if indentation

Indent the branch of an if.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
To: kernel-janitors@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1539/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Fix a typo.
Andrea Gelmini [Thu, 5 Aug 2010 13:51:25 +0000 (15:51 +0200)]
MIPS: Fix a typo.

"Userpace" -> "Userspace"

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Martin Hicks <mort@sgi.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1536/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoperf trace scripting: Fix extern struct definitions
Stephane Eranian [Mon, 20 Sep 2010 22:45:01 +0000 (00:45 +0200)]
perf trace scripting: Fix extern struct definitions

Both python_scripting_ops and perl_scripting_ops have two global definitions.
One in trace-event-scripting.c and one in their respective scripting-engine
modules.

The issue is that depending on the linker order one definition or the other
is chosen. One is uninitialized (bss), while the other is initialized. If
the uninitialized version is chosen, then perf does not function properly.

This patch fixes this by adding the extern prefix to the definitions in
trace-event-scripting.c.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <4c97e41a.078fd80a.7a8b.3cc9@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
14 years agoperf ui hist browser: Fix segfault on 'a' for annotate
Frederik Deweerdt [Thu, 23 Sep 2010 20:19:01 +0000 (22:19 +0200)]
perf ui hist browser: Fix segfault on 'a' for annotate

There a typo in util/ui/browsers/hists.c that leads to a segfault when you
press the 'a' key on a non-resolved symbol (plain hex address).

LKML-Reference: <20100923201901.GE31726@gambetta>
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@xprog.eu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
14 years agoperf tools: Fix build breakage
Kusanagi Kouichi [Sun, 26 Sep 2010 17:17:42 +0000 (14:17 -0300)]
perf tools: Fix build breakage

The patch ecafda6 introduced a problem where all object files would be
always rebuilt, fix it by using:

http://www.gnu.org/software/make/manual/html_node/Prerequisite-Types.html

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Bernd Petrovitsch <bernd@sysprog.at>
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
14 years agowriteback: always use sb->s_bdi for writeback purposes
Christoph Hellwig [Mon, 4 Oct 2010 12:25:33 +0000 (14:25 +0200)]
writeback: always use sb->s_bdi for writeback purposes

We currently use struct backing_dev_info for various different purposes.
Originally it was introduced to describe a backing device which includes
an unplug and congestion function and various bits of readahead information
and VM-relevant flags.  We're also using for tracking dirty inodes for
writeback.

To make writeback properly find all inodes we need to only access the
per-filesystem backing_device pointed to by the superblock in ->s_bdi
inside the writeback code, and not the instances pointeded to by
inode->i_mapping->backing_dev which can be overriden by special devices
or might not be set at all by some filesystems.

Long term we should split out the writeback-relevant bits of struct
backing_device_info (which includes more than the current bdi_writeback)
and only point to it from the superblock while leaving the traditional
backing device as a separate structure that can be overriden by devices.

The one exception for now is the block device filesystem which really
wants different writeback contexts for it's different (internal) inodes
to handle the writeout more efficiently.  For now we do this with
a hack in fs-writeback.c because we're so late in the cycle, but in
the future I plan to replace this with a superblock method that allows
for multiple writeback contexts per filesystem.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
14 years agofuse: Initialize total_len in fuse_retrieve()
Geert Uytterhoeven [Thu, 30 Sep 2010 20:06:21 +0000 (22:06 +0200)]
fuse: Initialize total_len in fuse_retrieve()

fs/fuse/dev.c:1357: warning: ‘total_len’ may be used uninitialized in this
function

Initialize total_len to zero, else its value will be undefined.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
14 years agodrm/i915: Rephrase pwrite bounds checking to avoid any potential overflow
Chris Wilson [Sun, 26 Sep 2010 19:21:44 +0000 (20:21 +0100)]
drm/i915: Rephrase pwrite bounds checking to avoid any potential overflow

... and do the same for pread.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
14 years agodrm/i915: Sanity check pread/pwrite
Chris Wilson [Sun, 26 Sep 2010 19:50:05 +0000 (20:50 +0100)]
drm/i915: Sanity check pread/pwrite

Move the access control up from the fast paths, which are no longer
universally taken first, up into the caller. This then duplicates some
sanity checking along the slow paths, but is much simpler.
Tracked as CVE-2010-2962.

Reported-by: Kees Cook <kees@ubuntu.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
14 years agohwmon: f71882fg: use a muxed resource lock for the Super I/O port
Giel van Schijndel [Sun, 3 Oct 2010 12:09:49 +0000 (08:09 -0400)]
hwmon: f71882fg: use a muxed resource lock for the Super I/O port

Sleep while acquiring a resource lock on the Super I/O port. This should
prevent collisions from causing the hardware probe to fail with -EBUSY.

Signed-off-by: Giel van Schijndel <me@mortis.eu>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
14 years agodrm/i915: Use pipe state to tell when pipe is off
Keith Packard [Sun, 3 Oct 2010 07:33:06 +0000 (00:33 -0700)]
drm/i915: Use pipe state to tell when pipe is off

Instead of waiting for the display line value to settle, we can simply
wait for the pipe configuration register 'state' bit to turn off.

Contrarywise, disabling the plane will not cause the display line
value to stop changing, so instead we wait for the vblank interrupt
bit to get set. And, we only do this when we're not about to wait for
the pipe to turn off.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
14 years agodrm/i915: vblank status not valid while training display port
Keith Packard [Sun, 3 Oct 2010 07:33:05 +0000 (00:33 -0700)]
drm/i915: vblank status not valid while training display port

While the display port is in training mode, vblank interrupts don't
occur. Because we have to wait for the display port output to turn on
before starting the training sequence, enable the output in 'normal'
mode so that we can tell when a vblank has occurred, then start the
training sequence.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
14 years agoof/spi: Fix OF-style driver binding of spi devices
Sinan Akman [Sun, 3 Oct 2010 03:28:29 +0000 (21:28 -0600)]
of/spi: Fix OF-style driver binding of spi devices

This patch adds the OF hook to the spi core so that devices
can automatically be registered based on device tree data.  This fixes
a problem with spi devices not binding to drivers after the cleanup of
the spi & i2c binding code.

Signed-off-by: Sinan Akman <sinan@writeme.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14 years agospi: spi-gpio.c tests SPI_MASTER_NO_RX bit twice, but not SPI_MASTER_NO_TX
Roel Kluin [Sat, 2 Oct 2010 12:03:32 +0000 (14:03 +0200)]
spi: spi-gpio.c tests SPI_MASTER_NO_RX bit twice, but not SPI_MASTER_NO_TX

The SPI_MASTER_NO_TX bit (can't do buffer write) wasn't tested.  This
code was introduced in commit 3c8e1a84 (spi/spi-gpio: add support for
controllers without MISO or MOSI pin).  This patch fixes a bug in
choosing which transfer ops to use.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14 years agodrivers/gpu/drm/i915/i915_gem.c: Add missing error handling code
Julia Lawall [Sat, 2 Oct 2010 13:59:17 +0000 (15:59 +0200)]
drivers/gpu/drm/i915/i915_gem.c: Add missing error handling code

Extend the error handling code with operations found in other nearby error
handling code

A simplified version of the sematic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
@r@
statement S1,S2,S3;
constant C1,C2,C3;
@@

*if (...)
 {... S1 return -C1;}
...
*if (...)
 {... when != S1
    return -C2;}
...
*if (...)
 {... S1 return -C3;}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
14 years agoregulator: max8649 - fix setting extclk_freq
Axel Lin [Fri, 1 Oct 2010 05:56:27 +0000 (13:56 +0800)]
regulator: max8649 - fix setting extclk_freq

The SYNC bits are BIT6 and BIT7 of MAX8649_SYNC register.
pdata->extclk_freq could be [0|1|2].
(MAX8649_EXTCLK_26MHZ|MAX8649_EXTCLK_13MHZ|MAX8649_EXTCLK_19MHZ)
It requires to left shift 6 bits to properly set extclk_freq.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
14 years agoregulator: fix typo in current units
Cyril Chemparathy [Wed, 22 Sep 2010 16:30:15 +0000 (12:30 -0400)]
regulator: fix typo in current units

This patch fixes a typo that incorrectly reports mA numbers as uA.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
14 years agoregulator: fix device_register() error handling
Vasiliy Kulikov [Sun, 19 Sep 2010 12:55:01 +0000 (16:55 +0400)]
regulator: fix device_register() error handling

If device_register() fails then call put_device().
See comment to device_register.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Fri, 1 Oct 2010 22:03:37 +0000 (15:03 -0700)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: prevent infinite recursion in cifs_reconnect_tcon
  cifs: set backing_dev_info on new S_ISREG inodes

14 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 1 Oct 2010 22:02:41 +0000 (15:02 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hpet: Fix bogus error check in hpet_assign_irq()
  x86, irq: Plug memory leak in sparse irq
  x86, cpu: After uncapping CPUID, re-run CPU feature detection