Emmanuel Grumbach [Thu, 6 Jun 2019 08:06:45 +0000 (11:06 +0300)]
iwlwifi: mvm: remove last leftovers of d0i3
We're now left with a status bit that is never set and a few
other leftovers.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:03:01 +0000 (11:03 +0300)]
iwlwifi: mvm: remove iwl_mvm_update_d0i3_power_mode
Also change the signature of the power functions that won't
receive d0i3=true anymore.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:00:09 +0000 (11:00 +0300)]
iwlwifi: mvm: remove d0i3_ap_sta_id
This variable read, but never set. Remove it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 07:58:46 +0000 (10:58 +0300)]
iwlwifi: mvm: iwl_mvm_wowlan_config_key_params is for wowlan only
Now that d0i3 is dead, this function can't be called from d0i3
flows. Change its signature and make it static.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 07:47:33 +0000 (10:47 +0300)]
iwlwifi: mvm: remove the d0i3 entry/exit flow
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 07:41:17 +0000 (10:41 +0300)]
iwlwifi: mvm: remove the tx defer for d0i3
This is not needed anymore
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Tue, 11 Jun 2019 10:15:24 +0000 (13:15 +0300)]
iwlwifi: remove all the d0i3 references
As part of the d0i3 removal.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 06:52:56 +0000 (09:52 +0300)]
iwlwifi: mvm: start to remove the code for d0i3
For runtime PM to work with d0i3 code, a lot of integration work needs
to be done with the platform (e.g. the out-of-band wake up interrupt)
and we currently don't have any platforms where this integration
happened. So, this code has been pretty much stale for a while and
when someone enables it, it just breaks things.
Therefore, to simplify the code base and make sure no one enables this
by mistake, we will remove the whole code.
This is only the very start, much more work is needed.
Remove the places where we check iwl_mvm_is_d0i3_supported
but leave all the refs, those will be removed in a different
patch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shaul Triebitz [Tue, 4 Jun 2019 08:50:34 +0000 (11:50 +0300)]
iwlwifi: mvm: add the skb length to a print
When printing a TX, add to the print the length of the frame.
That will help with BSEP (buffer status report poll) tests.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Beker Ayala [Sun, 2 Jun 2019 10:55:44 +0000 (13:55 +0300)]
iwlwifi: mvm: fix scan config command size
Use the actual length of channels array and not the max capable length.
Signed-off-by: Beker Ayala <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Thu, 23 May 2019 05:39:27 +0000 (08:39 +0300)]
iwlwifi: add ldbg config cmd debug print
add support to print ldbg command in mvm and xvt mode
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Sun, 19 May 2019 07:52:59 +0000 (10:52 +0300)]
iwlwifi: dbg: support debug recording suspend resume command
Support the new DBGC_SUSPEND_RESUME command to change the recording state.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Wed, 22 May 2019 10:47:29 +0000 (13:47 +0300)]
iwlwifi: dbg: move debug recording stop from trans to op mode
The op mode should stop the debug recording and not the transport layer.
Rename iwl_fwrt_stop_device into iwl_fw_dbg_stop_sync and move the debug
stop recording to it.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Tue, 21 May 2019 06:42:15 +0000 (09:42 +0300)]
iwlwifi: dbg: move monitor recording functionality from header file
The recording functions are quite big to be inline and the driver should
expose only the stop and restart functions that are allowed to be used
rather then the internal helper functions. Move the functions from the
header file.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Johannes Berg [Mon, 20 May 2019 09:26:16 +0000 (11:26 +0200)]
iwlwifi: mvm: remove unnecessary forward declarations
These static functions are only used after their definition,
so we don't need the forward declarations.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Ilan Peer [Sun, 19 May 2019 11:56:31 +0000 (14:56 +0300)]
iwlwifi: mvm: Block 26-tone RU OFDMA transmissions
In case that there are OBSS that do not know how to properly
interpret 26-tone RU OFDMA transmissions, instruct the FW not
to use such transmissions.
The check is currently only performed upon association.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Tue, 21 May 2019 19:13:10 +0000 (22:13 +0300)]
iwlwifi: mvm: remove redundant condition in iwl_mvm_set_hw_rfkill_state
If mvm->fwrt.cur_fw_img != IWL_UCODE_INIT, then
rfkill_safe_init_done must be true since
rfkill_safe_init_done is set to true before we start to load
the runtime image.
Remove the redundant condition.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Ilia Lin [Tue, 14 May 2019 14:19:06 +0000 (17:19 +0300)]
iwlwifi: Send DQA enable command only if TVL is on
The newer targets don't support the DQA enablement command
and will return error status, while older targets need it.
The feature is defined by the corresponding TLV.
Send the command only if the TLV is enabled.
Signed-off-by: Ilia Lin <ilia.lin@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Wed, 10 Apr 2019 06:23:39 +0000 (09:23 +0300)]
iwlwifi: bump FW API to 49 for 22000 series
Start supporting API version 49 for 22000 series.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Kalle Valo [Fri, 6 Sep 2019 08:59:32 +0000 (11:59 +0300)]
Merge tag 'mt76-for-kvalo-2019-09-05' of https://github.com/nbd168/wireless
mt76 patches for 5.4
* beacon tx fix for mt76x02
* sparse/checkpatch warning fixes
* DFS pattern detector for mt7615 (DFS channels not enabled yet)
* CSA support for mt7615
* mt7615 cleanup/fixes
* mt7615 rate control improvements
* usb fixes
* mt7615 powersave buffering fix
* new device support for mt76x0
* support for more ciphers in mt7615
* watchdog time fixes
* smart carrier sense on mt7615
* survey support on mt7615
* multiple interfaces on mt76x02u
* calibration data fix for mt7615
* fix for sending BAR after disassoc
Lorenzo Bianconi [Mon, 2 Sep 2019 12:51:54 +0000 (14:51 +0200)]
mt76: mt7615: add support to read temperature from mcu
Introduce debugfs entry to read device temperature and related cmu
command. Introduce mt7615_mcu_parse_response to parse mcu response
messages and refactor mt7615_mcu_msg_send routine
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Wed, 28 Aug 2019 09:01:40 +0000 (11:01 +0200)]
mt76: mt7615: introduce mt7615_txwi_to_txp utility routine
Introduce mt7615_txwi_to_txp utility routine to convert mt76_txwi_cache
into mt7615_txp and remove duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
YueHaibing [Tue, 27 Aug 2019 13:44:45 +0000 (21:44 +0800)]
mt76: mt7603: use devm_platform_ioremap_resource() to simplify code
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Fri, 23 Aug 2019 08:52:17 +0000 (10:52 +0200)]
mt76: mt76x0: remove unneeded return value on set channel
We allways return 0 from mt76x0_phy_set_channel(), no need to pass
return value upward.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Fri, 23 Aug 2019 08:52:16 +0000 (10:52 +0200)]
mt76: mt76x0: remove redundant chandef copy
We set dev->mt76.chandef in mt76_set_channel() already.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Fri, 23 Aug 2019 08:46:12 +0000 (10:46 +0200)]
mt76: make mt76_rx_convert static
mt76_rx_convert() not need to be exported any longer.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 22 Aug 2019 08:08:56 +0000 (10:08 +0200)]
mt76: remove offchannel check in tx scheduling
tx queues are already disabled by mac80211 during scanning or other
off-channel activity. There is no need to repeat the check in mt76,
since scheduled queues are selected by mac80211 as well.
Signed-off-by: Balakrishna Bandi <b.balakrishna@globaledgesoft.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 22 Aug 2019 07:37:41 +0000 (09:37 +0200)]
mt76: do not send BAR frame on tx aggregation flush stop
There is no need to send a BAR frame after stopping aggregation, and doing
so could lead to sending class 3 frames after deauthentication from an AP
Signed-off-by: Balakrishna Bandi <b.balakrishna@globaledgesoft.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 12 Aug 2019 13:48:53 +0000 (15:48 +0200)]
mt76: stop rx aggregation on station removal
Fixes use-after-free issues on forced station removal during hardware restart
on MT76x02
Fixes: aee5b8cf2477 ("mt76: implement A-MPDU rx reordering in the driver code")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 12 Aug 2019 13:50:59 +0000 (15:50 +0200)]
mt76: dma: reset q->rx_head on rx reset
Fixes rx of the first frame if a fragmented rx was interrupted by the reset
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 21 Aug 2019 13:21:00 +0000 (15:21 +0200)]
mt76: mt7615: apply calibration-free data from OTP
MT7615 chips usually come pre-calibrated, even when used on embedded boards.
In that case, the on-flash EEPROM data needs to be merged with some data
from OTP ROM.
Run this merge if the external EEPROM data is valid and OTP has valid fields.
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Wed, 21 Aug 2019 08:00:19 +0000 (10:00 +0200)]
mt76: add default implementation for mt76_sw_scan/mt76_sw_scan_complete
Introduce a default implementation for mt76_sw_scan and
mt76_sw_scan_complete in mt76 module and remove duplicated code
since most of the drivers share the same implementation
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 21 Aug 2019 03:11:15 +0000 (11:11 +0800)]
mt76: fix some checkpatch warnings
This fixes the following checkpatch warnings:
CHECK: Alignment should match open parenthesis
CHECK: No space is necessary after a cast
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Tue, 20 Aug 2019 14:56:25 +0000 (16:56 +0200)]
mt76: mt7615: add BIP_CMAC_128 cipher support
Refactor mt7615_mac_wtbl_set_key and introduce
the following routines in order to configure wtbl entries
and properly add hw support to BIP_CMAC_128 cipher:
- mt7615_mac_wtbl_update_cipher
- mt7615_mac_wtbl_update_pk
- mt7615_mac_wtbl_update_key
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 9 Aug 2019 17:25:15 +0000 (19:25 +0200)]
mt76: mt7603: remove unnecessary mcu queue initialization
Remove unnecessary mcu queue initialization in mt7603_dma_init since it
has been already done in mt76_mmio_init
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 9 Aug 2019 17:06:02 +0000 (19:06 +0200)]
mt76: move mt76_tx_tasklet in mt76 module
Move mt76{15,03}_tx_tasklet in mt76_alloc_device in order to be used as
default tx_tasklet initialization. Remove duplicated code in
mt7603/mt7615 drivers
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 5 Aug 2019 06:55:53 +0000 (08:55 +0200)]
mt76: mt7615: enable survey support
Introduce channel survey support for mt7615 driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 5 Aug 2019 06:55:52 +0000 (08:55 +0200)]
mt76: mt7603: move survey_time in mt76_dev
Move survey_time field in mt76_dev in order to be reused adding survey
support to mt7615 driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 5 Aug 2019 06:55:51 +0000 (08:55 +0200)]
mt76: mt76x02u: enable survey support
Introduce channel survey support for mt76x2u and mt76x0u drivers
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 2 Aug 2019 14:36:20 +0000 (16:36 +0200)]
mt76: mt76x02u: enable multi-vif support
Enable multi-interface support for mt76x02u driver. For the moment
allow max two concurrent interfaces in order to preserve enough room
for ps traffic since we are using beacon slots for it.
I have successfully tested the following configuration:
- AP + STA
- AP0 + AP1
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 1 Aug 2019 08:26:23 +0000 (10:26 +0200)]
mt76: mt76x02: do not copy beacon skb in mt76x02_mac_set_beacon_enable
Do not copy beacon skb in mt76x02_mac_set_beacon_enable for usb devices
since it will be done in mt76x02_update_beacon_iter. Moreover squash
mt76x02_mac_set_beacon_enable and __mt76x02_mac_set_beacon_enable since
the latter is run just by mt76x02_mac_set_beacon_enable
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 1 Aug 2019 08:26:22 +0000 (10:26 +0200)]
mt76: mt76x02: introduce mt76x02_pre_tbtt_enable and mt76x02_beacon_enable macros
Improve code readability introducing mt76x02_pre_tbtt_enable and
mt76x02_beacon_enable utility macros
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 28 Jul 2019 19:03:18 +0000 (21:03 +0200)]
mt76: mt7615: add Smart Carrier Sense support
Introduce Smart Carrier Sense support in order to tune device
sensitivity according to RTS error rate and False CCA reported by the
radio
Tested-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 28 Jul 2019 19:03:17 +0000 (21:03 +0200)]
mt76: mt7615: rework locking scheme for mt7615_set_channel
As already done for mt7603 driver, move mt76.mutex lock inside
mt7615_set_channel since we need to grab mt76.mutex in mt7615_mac_work.
This is a preliminary patch to add Smart Carrier Sense (SCS) support
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 24 Jul 2019 08:58:20 +0000 (16:58 +0800)]
mt76: switch to SPDX tag instead of verbose boilerplate text
No functional change intended.
Add SPDX identifiers to all remaining files in /mt76.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 24 Jul 2019 08:58:18 +0000 (16:58 +0800)]
mt76: mt76x02: fix some checkpatch warnings
This fixes the following checkpatch warnings:
ERROR: code indent should use tabs where possible
CHECK: Alignment should match open parenthesis
CHECK: No space is necessary after a cast
CHECK: Please don't use multiple blank lines
CHECK: Avoid precedence issues in macro
WARNING: Statements should start on a tabstop
WARNING: Unnecessary space before function pointer arguments
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 24 Jul 2019 08:58:17 +0000 (16:58 +0800)]
mt76: mt7615: fix some checkpatch warnings
This fixes the following checkpatch warnings:
WARNING: Improper SPDX comment style
Fix blank lines.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 24 Jul 2019 08:58:16 +0000 (16:58 +0800)]
mt76: mt7603: fix some checkpatch warnings
This fixes the following checkpatch warnings:
WARNING: Improper SPDX comment style
CHECK: No space is necessary after a cast
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 24 Jul 2019 08:58:15 +0000 (16:58 +0800)]
mt76: Add paragraphs to describe the config symbols fully
Update the help text to fix a checkpatch warning:
WARNING: please write a paragraph that describes the config symbol fully
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Mon, 22 Jul 2019 08:50:09 +0000 (16:50 +0800)]
mt76: mt7615: update cw_min/max related settings
Add default values of cw_min/max and use fls() for configuration.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Mon, 22 Jul 2019 08:50:08 +0000 (16:50 +0800)]
mt76: mt7615: add 4 WMM sets support
Hardware supports 4 sets of WMM that should be put to good use.
And fix incorrect queue mapping in mt7615_conf_tx().
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 18 Jul 2019 22:50:42 +0000 (00:50 +0200)]
mt76: mt7603: fix watchdog rescheduling in mt7603_set_channel
Convert MT7603_WATCHDOG_TIME in jiffies rescheduling watchdog delayed
work
Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 18 Jul 2019 22:44:16 +0000 (00:44 +0200)]
mt76: mt7615: fix MT7615_WATCHDOG_TIME definition
Express watchdog timeout in jiffies since it is used directly in
ieee80211_queue_delayed_work
Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 13 Jul 2019 15:09:06 +0000 (17:09 +0200)]
mt76: introduce mt76_mmio_read_copy routine
Add mt76_mmio_read_copy routine and the related function pointer in
mt76_bus_ops data structure. mt76_mmio_read_copy will be used to add
BIP_CMAC_128 cipher hw support to mt7615 driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 13 Jul 2019 15:09:05 +0000 (17:09 +0200)]
mt76: mt7615: add set_key_cmd and mt76_wcid to mt7615_mac_wtbl_set_key signature
Introduce set_key_cmd and mt76_wcid pointer to mt7615_mac_wtbl_set_key
signature and do not set key to NULL if cmd is DISABLE_KEY.
This is a preliminary patch to add BIP_CMAC_128 hw support to mt7615
driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 13 Jul 2019 15:09:04 +0000 (17:09 +0200)]
mt76: mt7615: remove wtbl_sec_key definition
Get rid of wtbl_sec_key definition since it is no longer used
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 13 Jul 2019 15:09:03 +0000 (17:09 +0200)]
mt76: mt7615: introduce mt7615_mac_wtbl_set_key routine
Add mt7615_mac_wtbl_set_key routine to configure wtbl key parameter
directly from host cpu. This is a preliminary patch to add BIP_CMAC_128
hw support. Moreover add static qualifier to mt7615_mac_get_key_info
routine
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 13 Jul 2019 15:09:02 +0000 (17:09 +0200)]
mt76: mt7615: add mt7615_mac_wtbl_addr routine
Introduce mt7615_mac_wtbl_addr rouinte to compute sta wtbl address.
This is a preliminary patch to update wtbl key directly from host
processor
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 13 Jul 2019 15:09:01 +0000 (17:09 +0200)]
mt76: mt7615: move mt7615_mac_get_key_info in mac.c
This is a preliminary patch to update wtbl key directly from host
processor
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 16 Jul 2019 16:12:07 +0000 (18:12 +0200)]
mt76: mt7615: add missing register initialization
- initialize CCA signal source
- initialize clock for band 1 (7615D)
- initialize BAR rate
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 5 Jul 2019 19:01:04 +0000 (21:01 +0200)]
mt76: mt76x0u: add support to TP-Link T2UHP
Introduce support to TP-Link T2UHP
https://wikidevi.com/wiki/TP-LINK_Archer_T2UHP
Tested-by: Sid Hayn <sidhayn@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Fri, 12 Jul 2019 12:08:00 +0000 (14:08 +0200)]
mt76: mt7615: use params->ssn value directly
There is no point to use pointer to params->ssn.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Fri, 12 Jul 2019 12:07:59 +0000 (14:07 +0200)]
mt76: mt7603: use params->ssn value directly
There is no point to use pointer to params->ssn.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Fri, 12 Jul 2019 12:07:58 +0000 (14:07 +0200)]
mt76: mt76x02: use params->ssn value directly
There is no point to use pointer to params->ssn.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Tue, 9 Jul 2019 15:14:55 +0000 (17:14 +0200)]
mt76: usb: remove unneeded {put,get}_unaligned
Compiler give us guarantees on variables alignment, so use
an variable as buffer when read/write registers and remove
unneeded {put,get}_unaligned.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Tue, 9 Jul 2019 15:14:54 +0000 (17:14 +0200)]
mt76: usb: fix endian in mt76u_copy
In contrast to mt76_wr() which we use to program registers,
on mt76_wr_copy() we should not change endian of the data.
Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 12 Jul 2019 06:19:35 +0000 (08:19 +0200)]
mt76: mt7603: fix invalid fallback rates
Only decrement the rate index on duplicate rates if it is not already 0
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 11 Jul 2019 19:34:25 +0000 (21:34 +0200)]
mt76: mt7615: fix invalid fallback rates
Only decrement the rate index on duplicate rates if it is not already 0
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 11 Jul 2019 19:32:00 +0000 (21:32 +0200)]
mt76: mt7615: fix PS buffering of action frames
Bufferable management frames need to be put in the data queue, otherwise
they will not be buffered when the receiver is asleep.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 11 Jul 2019 19:17:06 +0000 (21:17 +0200)]
mt76: mt7615: fix using VHT STBC rates
The hardware expects MT_TX_RATE_NSS to be filled with the number of
space/time streams. For non-STBC rates, this is equal to nss.
For 1-stream STBC, this needs to be set to 2.
This is relevant for VHT rates only, on HT, the value is derived from MCS
internally.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Wed, 3 Jul 2019 22:59:19 +0000 (00:59 +0200)]
mt76: mt76u: fix typo in mt76u_fill_rx_sg
Fix typo setting urb->transfer_buffer_length in mt76u_fill_rx_sg
Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer")
Fixes: f8f527b16db5 ("mt76: usb: use EP max packet aligned buffer sizes for rx")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 3 Jul 2019 19:39:04 +0000 (21:39 +0200)]
mt76: mt7615: sync with mt7603 rate control changes
- Store the previous and current rate set in the driver + the TSF value
at the time of the switch.
- Use the tx status TSF value to determine which rate set needs to be used
as reference.
- Report only short or long GI rates for a single status event, not a mix.
- The hardware reports the last used rate index. Use it along with the
retry count to figure out what rate was used for the first attempt.
- Use the same retry count value for all rate slots to make this calculation
work.
- Derive the probe rate from the current rateset instead of the skb cb
- Do not wait for a status report for the probe frame before removing the
probe rate from the rate table. Do it immediately after it was referenced
in a tx status report.
- Use the first half of the first rate retry budget for the probe rate
in order to avoid using too many retries on that rate
- Switch from lower rates to higher rates more conservatively
- enable hardware rate up/down selection
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 3 Jul 2019 19:32:10 +0000 (21:32 +0200)]
mt76: mt7615: reset rate index/counters on rate table update
These values must be initialized to zero, otherwise the hardware could
reuse previous values, especially the rate index
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 3 Jul 2019 18:08:35 +0000 (20:08 +0200)]
mt76: mt7615: move mt7615_mcu_set_rates to mac.c
It bypasses the MCU, so it does not belong in mcu.c
Also make mt7615_mac_tx_rate_val static
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 3 Jul 2019 19:44:23 +0000 (21:44 +0200)]
mt76: mt7603: enable hardware rate up/down selection
Improves performance by switching away from bad rates faster
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Tue, 2 Jul 2019 11:39:49 +0000 (13:39 +0200)]
mt76: mt7615: introduce mt7615_mcu_send_ram_firmware routine
Add mt7615_mcu_send_ram_firmware routine since mt7615_load_ram runs the
same code to send ram firmware to cr4 and n9 mcus. Moreover rename
gen_dl_mode in mt7615_mcu_gen_dl_mode.
This patch does not introduce any behaviour change, it is just code
refactor.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Tue, 2 Jul 2019 09:24:51 +0000 (11:24 +0200)]
mt76: mt7615: always release sem in mt7615_load_patch
Release patch semaphore even if request_firmware fails in
mt7615_load_patch
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 1 Jul 2019 13:04:39 +0000 (15:04 +0200)]
mt76: mt7615: fall back to sw encryption for unsupported ciphers
Fix following warning falling back to sw encryption for unsupported
ciphers
WARNING: CPU: 2 PID: 1495 at backports-4.19.32-1/net/mac80211/key.c:1023
mt76_wcid_key_setup+0x68/0xbc [mt76]
CPU: 2 PID: 1495 Comm: hostapd Not tainted 4.14.131 #0
Stack :
00000000 8f0f8bc0 00000000 8007ccec 805f0000 8058ec18 00000000 00000000
80559788 8dca79bc 8fefb10c 805c89c7 805545c8 00000001 8dca7960 53261662
00000000 00000000 80640000 00004668 00000000 000000e9 00000007 00000000
00000000 805d0000 00072537 00000000 80000000 00000000 805f0000 8f1e70d0
8e8fa098 000003ff 805c0000 8f0f8bc0 00000001 802d4340 00000008 80630008
[<
800108d0>] show_stack+0x58/0x100
[<
8049214c>] dump_stack+0x9c/0xe0
[<
80033998>] __warn+0xe0/0x138
[<
80033a80>] warn_slowpath_null+0x1c/0x2c
[<
8e8fa098>] mt76_wcid_key_setup+0x68/0xbc [mt76]
[<
8e889930>] mt7615_eeprom_init+0x7c0/0xe14 [mt7615e]
Suggested-by: Sebastian Gottschall <s.gottschall@newmedia-net.de>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 1 Jul 2019 18:17:40 +0000 (20:17 +0200)]
mt76: mt7615: clean up FWDL TXQ during/after firmware upload
Since we don't clean that tx queue from the tx tasklet, we need to do it
after the firmware upload is done. This patch also adds a cleanup step during
the upload, to help reclaim memory faster.
Fixes unprocessed queued frames eating up memory long after the firmware
upload has already completed
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 29 Jun 2019 10:36:11 +0000 (12:36 +0200)]
mt76: mt7615: add radar pattern test knob to debugfs
Introduce mt7615_mcu_rdd_send_pattern routine to trigger a radar pattern
detection. Moreover move debugfs related routines in a dedicated source
file.
Suggested-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 29 Jun 2019 10:36:10 +0000 (12:36 +0200)]
mt76: mt7615: add csa support
Add Channel Switch Announcement support to mt7615 driver updating beacon
template with CSA IE received from mac80211
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 29 Jun 2019 10:36:08 +0000 (12:36 +0200)]
mt76: mt7615: do not perform txcalibration before cac is complited
Delay channel calibration after Channel Availability Check. Add some
code cleanup to mt7615_mcu_set_channel
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 29 Jun 2019 10:36:07 +0000 (12:36 +0200)]
mt76: mt7615: add hw dfs pattern detector support
Add hw radar detection support to mt7615 driver in order to
unlock dfs channels on 5GHz band
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 29 Jun 2019 10:36:06 +0000 (12:36 +0200)]
mt76: mt7615: introduce mt7615_regd_notifier
Introduce mt7615_regd_notifier callback. This is a preliminary patch to
add radar detection support to mt7615 driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 27 Jun 2019 14:49:44 +0000 (16:49 +0200)]
mt76: mt7615: fix sparse warnings: warning: restricted __le16 degrades to integer
Fix the following sparse warning in __mt7615_mcu_msg_send:
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c:78:15: sparse: warning:
restricted __le16 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c:78:15: sparse: warning:
cast from restricted __le16
Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 1 Jul 2019 11:15:07 +0000 (13:15 +0200)]
mt76: round up length on mt76_wr_copy
When beacon length is not a multiple of 4, the beacon could be sent with
the last 1-3 bytes corrupted. The skb data is guaranteed to have enough
room for reading beyond the end, because it is always followed by
skb_shared_info, so rounding up is safe.
All other callers of mt76_wr_copy have multiple-of-4 length already.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Gustavo A. R. Silva [Fri, 30 Aug 2019 18:57:16 +0000 (13:57 -0500)]
zd1211rw: zd_usb: Use struct_size() helper
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct usb_int_regs {
...
struct reg_data regs[0];
} __packed;
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
So, replace the following function:
static int usb_int_regs_length(unsigned int count)
{
return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data);
}
with:
struct_size(regs, regs, count)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Rafał Miłecki [Thu, 29 Aug 2019 08:27:01 +0000 (10:27 +0200)]
brcmfmac: get chip's default RAM info during PCIe setup
Getting RAM info just once per driver's lifetime (during chip
recognition) is not enough as it may get adjusted later (depending on
the used firmware). Subsequent inits may load different firmwares so a
full RAM recognition is required on every PCIe setup. This is especially
important since implementing hardware reset on a firmware crash.
Moreover calling brcmf_chip_get_raminfo() makes sure that RAM core is
up. It's important as having BCMA_CORE_SYS_MEM down on BCM4366 was
resulting in firmware failing to initialize and following error:
[ 65.657546] brcmfmac 0000:01:00.0: brcmf_pcie_download_fw_nvram: Invalid shared RAM address 0x04000001
This change makes brcmf_chip_get_raminfo() call during chip recognition
redundant for PCIe devices but SDIO and USB still need it and it's a
very small overhead anyway.
Fixes: 4684997d9eea ("brcmfmac: reset PCIe bus on a firmware crash")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Colin Ian King [Tue, 27 Aug 2019 08:16:20 +0000 (09:16 +0100)]
bcma: fix incorrect update of BCMA_CORE_PCI_MDIO_DATA
An earlier commit re-worked the setting of the bitmask and is now
assigning v with some bit flags rather than bitwise or-ing them
into v, consequently the earlier bit-settings of v are being lost.
Fix this by replacing an assignment with the bitwise or instead.
Addresses-Coverity: ("Unused value")
Fixes: 2be25cac8402 ("bcma: add constants for PCI and use them")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Xulin Sun [Fri, 23 Aug 2019 07:47:08 +0000 (15:47 +0800)]
brcmfmac: replace strncpy() by strscpy()
The strncpy() may truncate the copied string,
replace it by the safer strscpy().
To avoid below compile warning with gcc 8.2:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:In function 'brcmf_vndr_ie':
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:4227:2:
warning: 'strncpy' output truncated before terminating nul copying 3 bytes from a string of the same length [-Wstringop-truncation]
strncpy(iebuf, add_del_cmd, VNDR_IE_CMD_LEN - 1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Xulin Sun <xulin.sun@windriver.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Stanislaw Gruszka [Fri, 23 Aug 2019 07:09:56 +0000 (09:09 +0200)]
rt2x00: do not set IEEE80211_TX_STAT_AMPDU_NO_BACK on tx status
According to documentation IEEE80211_TX_STAT_AMPDU_NO_BACK is suppose
to be used when we do not recive BA (BlockAck). However on rt2x00 we
use it when remote station fail to decode one or more subframes within
AMPDU (some bits are not set in BlockAck bitmap). Setting the flag result
in sent of BAR (BlockAck Request) frame and this might result of abuse
of BA session, since remote station can sent BA with incorrect
sequence numbers after receiving BAR. This problem is visible especially
when connecting two rt2800 devices.
Previously I observed some performance benefits when using the flag
when connecting with iwlwifi devices. But currently possibly due
to reacent changes in rt2x00 removing the flag has no effect on
those test cases.
So remove the IEEE80211_TX_STAT_AMPDU_NO_BACK.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Colin Ian King [Thu, 22 Aug 2019 22:00:25 +0000 (23:00 +0100)]
ipw2x00: fix spelling mistake "initializationg" -> "initialization"
There is a spelling mistake in an IPW_DEBUG_INFO message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Wenwen Wang [Fri, 16 Aug 2019 03:50:02 +0000 (22:50 -0500)]
airo: fix memory leaks
In proc_BSSList_open(), 'file->private_data' is allocated through kzalloc()
and 'data->rbuffer' is allocated through kmalloc(). In the following
execution, if an error occurs, they are not deallocated, leading to memory
leaks. To fix this issue, free the allocated memory regions before
returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Oliver Neukum [Tue, 13 Aug 2019 12:04:11 +0000 (14:04 +0200)]
zd1211rw: remove false assertion from zd_mac_clear()
The function is called before the lock which is asserted was ever used.
Just remove it.
Reported-by: syzbot+74c65761783d66a9c97c@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Colin Ian King [Fri, 9 Aug 2019 17:22:17 +0000 (18:22 +0100)]
brcmfmac: remove redundant assignment to pointer hash
The pointer hash is being initialized with a value that is never read
and is being re-assigned a little later on. The assignment is
redundant and hence can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
YueHaibing [Fri, 9 Aug 2019 08:53:08 +0000 (16:53 +0800)]
bcma: remove two unused variables
drivers/bcma/driver_mips.c:70:18: warning:
ipsflag_irq_shift defined but not used [-Wunused-const-variable=]
drivers/bcma/driver_mips.c:62:18: warning:
ipsflag_irq_mask defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Jia-Ju Bai [Mon, 29 Jul 2019 09:56:52 +0000 (17:56 +0800)]
brcm80211: Avoid possible null-pointer dereferences in wlc_phy_radio_init_2056()
In wlc_phy_radio_init_2056(), regs_SYN_2056_ptr, regs_TX_2056_ptr and
regs_RX_2056_ptr may be not assigned, and thus they are still NULL.
Then, they are used on lines 20042-20050:
wlc_phy_init_radio_regs(pi, regs_SYN_2056_ptr, (u16) RADIO_2056_SYN);
wlc_phy_init_radio_regs(pi, regs_TX_2056_ptr, (u16) RADIO_2056_TX0);
wlc_phy_init_radio_regs(pi, regs_TX_2056_ptr, (u16) RADIO_2056_TX1);
wlc_phy_init_radio_regs(pi, regs_RX_2056_ptr, (u16) RADIO_2056_RX0);
wlc_phy_init_radio_regs(pi, regs_RX_2056_ptr, (u16) RADIO_2056_RX1);
Thus, possible null-pointer dereferences may occur.
To avoid these bugs, when these variables are not assigned,
wlc_phy_radio_init_2056() directly returns.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Yu-Yen Ting [Tue, 3 Sep 2019 09:14:07 +0000 (17:14 +0800)]
rtw88: pci: enable MSI interrupt
MSI interrupt should be enabled on certain platform.
Add a module parameter disable_msi to disable MSI interrupt,
driver will then use legacy interrupt instead.
One could rebind the PCI device, probe() will pick up the
new value of the module parameter. Such as:
echo '0000:01:00.0' > /sys/bus/pci/drivers/rtw_pci/unbind
echo '0000:01:00.0' > /sys/bus/pci/drivers/rtw_pci/bind
Tested-by: Ján Veselý <jano.vesely@gmail.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Yu-Yen Ting <steventing@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Jian-Hong Pan [Tue, 3 Sep 2019 09:14:06 +0000 (17:14 +0800)]
rtw88: pci: Move a mass of jobs in hw IRQ to soft IRQ
There is a mass of jobs between spin lock and unlock in the hardware
IRQ which will occupy much time originally. To make system work more
efficiently, this patch moves the jobs to the soft IRQ (bottom half) to
reduce the time in hardware IRQ.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Colin Ian King [Thu, 22 Aug 2019 11:37:28 +0000 (12:37 +0100)]
rtw88: remove redundant assignment to pointer debugfs_topdir
Pointer debugfs_topdir is initialized to a value that is never read
and it is re-assigned later. The initialization is redundant and can
be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
projects / openwrt / staging / blogic.git / log