staging: comedi: pcl818: remove unnecessary s->len_chanlist init

The subdevice 'len_chanlist' member is only used with async command
support. Remove the initialization of this member for the subdevices
that do not support commands. The core will then correctly initialize
it to the default value of '1'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: remove 'sub_ai' from private data

This member of the private data is a duplicate of the comedi_device
'read_subdev' member. Remove the private data member and use the
comedi_device member instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: only init async command members when needed

The 'len_chanlist' and 'cancel' members of the comedi_subdevice are
only used with async command support. Only initialize them if the irq
was sucessfully requested.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: remove function trace noise

These kernel messages are just added noise. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: remove unnecessary 'dev->irq' tests

These functions can only be called if the irq was sucessfully requested.
The dev->irq will always be valid.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: remove 'irq_free' from private data

This member of the private data is not needed. We can check if
dev->irq is none zero instead. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: remove 'sub_ai' from private data

This member of the private data is a duplicate of the comedi_device
'read_subdev' member. Remove the private data member and use the
comedi_device member instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: only init command support if irq is available

The async command support requires an irq. Only initialize the subdevice
command support if the request_irq was successfull.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: remove 'irq_free' from private data

This member of the private data is not needed. We can check if
dev->irq is none zero instead. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: fix async command hookup

Only set the SDF_CMD_READ subdev_flag if the irq was sucessfully
requested.

Remove the unnecessary sanity check of dev->irq in s626_ai_cmd().
This callback is only hooked up if the irq is available.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: delete unnecessary variable in function et131x_init

Variable u32 numrfd is not necessary in this function.

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: change function name

Change function name from et1310_phy_power_down to et1310_phy_power_switch
to better describe its functionality.

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: reapply an older patch that was reverted

This reapplies part of 9edf0f670bdc8fa8b6676893b0a3bd2bf3 (staging:
lustre: clean up format string usages) as it was reverted in a recent
change to this file.

That proves the big problem of having external trees you have to have
patches flowing back into them from upstream or things break down...

Reported-by: Kees Cook <keescook@chromium.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Peng Tao <bergwolf@gmail.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vme: remove DEFINE_PCI_DEVICE_TABLE macro

Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VME: Rename vme_slot_get to avoid confusion with reference counting

Traditionally the "get" functions increment the reference count of the
object that is returned, which does not happen with vme_slot_get. The
function vme_slot_get returns the physical VME slot associated with a
particular struct vme_dev. Rename vme_slot_num to avoid any confusion.

Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VME: Provide access to VME bus enumeration and fix vme_user match function

The match function for vme_user is completely wrong. It will blindly bind
against the first VME slot on each bus (at this point that would be just the
first bus as the driver can only handle one bus).

The original intention (before some major subsystem changes) was that the
driver bind against the slot to which the bridge was attached in the VME
system and to the bus(es) provided via the "bus" module parameter.

To do this cleanly (i.e. without poking arround in the subsystems internal
stuctures) a functionality has been added to provide access to the bus
enumeration.

Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dwc2: fix sparse non static symbol warning

Fixes the following sparse warning:

drivers/staging/dwc2/core.c:2672:6: warning:
 symbol 'dwc2_set_param_uframe_sched' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio16d: remove an unnecessary printk

This blank line printk is not necessary. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio16d: tidy up the irq support in atmio16d_attach()

Tidy up the code that does the request_irq().

Only hookup the commad support if the irq was sucessfully requested.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio16d: remove printk() noise in atmio16d_ai_insn_read()

These printk messages are just added noise. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcimio: convert printk() to dev_dbg()

Convert this printk messages to a dev_dbg().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: remove commented out printk message

This printk message is just added noise. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl812: convert printk messages in pcl812_attach()

Convert the printk messages in this function to dev_{level} mesages.

Remove the ones that are just added noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl812: tidy up the irq support in pcl812_attach()

Tidy up the code that does the request_irq().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: convert printk messages in pcl816_attach()

Convert the printk messages in this function to dev_{level} mesages.

Remove the ones that are just added noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: remove commented out printk debug

These messages are just added noise. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: tidy up the irq support in pcl816_attach()

Tidy up the code that does the request_irq().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: remove TRIG_WAKE_EOS support stub

The support code for this command flag is commented out. Just remove
it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: remove commented out outb() macro

This macro is commented out, thankfully... Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: convert printk() messages to dev_{level}

Convert the remaining printk messsages in this driver to dev_{level}.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: tidy up the irq support in pcl818_attach()

Tidy up the code that does the request_irq().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: remove board attach noise

These messages are just added noise. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: remove printk function trace messages

These messages are just added noise. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: remove commented out printk debug

These messages are just added noise. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcm3724: remove commented out printk debug

These messages are just added noise. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: plx9080.h: remove unnecessary printk noise

The timeouts will return -ETIMEDOUT. The printks are just added noise.
Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: remove commented out printk debug

These messages are just added noise. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mpc624: convert printk messages in mpc624_ai_rinsn()

There's no reason for these messages to be KERN_INFO. Convert them to
dev_dbg().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mpc624: remove unnecessary printk noise

The ai read timeout will return -ETIMEDOUT. The printk is just added
noise. Remove it.

It's also not necessary to set data[n[ = 0 when the read timesout.
Remove that also.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mpc624: remove unnecessary test

It's not necessaary to vaidate insn->n passed to the (*insn_read)
function. The for() loop following it will just be a NOP.

Remove the test as well as the printk noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mpc624: remove commented out printk

This printk is just added noise. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: remove commented out printk

This printk is just added noise. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: convert dt282x_ao_inttrig() messages

Convert the messages in this function to dev_err().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: convert dt282x_ai_dma_interrupt() messages

Convert the messages in this function to dev_{level}().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: convert dt282x_ao_dma_interrupt() messages

Convert the messages in this function to dev_err().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: remove disable code that disables the irq

The code that would disable the irq after getting a number of D/A errors
is disabled. Just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: remove unnecessary blank line message

This blank line message is not needed. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: convert printk() in dt282x_attach to a dev_err()

Convert this printk message into a dev_err().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: remove attach noise in dt282x_grab_dma()

These messages are just added noise. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: tidy up the irq support in dt282x_attach()

An irq is only needed by this driver in order to support async commands.
Since it is optional, modify the attach so that if the request_irq() fails
the attach does not fail.

Remove the printk noise about the irq.

Only hookup the async command support if the request_irq() was successful.

Also, only call dt282x_grab_dma() if we have an irq since interrupt support
is needed to support dma.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2815: convert printk's in dt2815_attach()

These messages don't appear to be important enough to warrent KERN_INFO
and KERN_WARNING levels. Convert them dev_dbg().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2815: convert printk's in dt2815_ao_insn()

Convert the printk(KERN_WARNING messages in this function to dev_dbg().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2814: tidy up the irq support in dt2814_attach()

An irq is only needed by this driver in order to support async commands.
Since it is optional, modify the attach so that if the request_irq() fails
the attach does not fail.

Remove the printk noise about the irq.

Only hookup the async command support if the request_irq() was successful.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2814: convert a printk(KERN_ERR into a dev_err()

Convert this printk message into a dev_dev().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2814: remove bad printk noise

This printk could spew a lot of noise while waiting for the ai conversion
to complete. Just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2814: remove unnecessary printk noise

The ai read timeout will return -ETIMEDOUT. The printk is just added
noise. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2811: remove disabled interrupt support code

The interrupt support in this driver is incomplete due to the missing
comedi functions to support async commands.

Since the interrupt code is already disable just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2811: remove disabled dt2811_adtrig() function

This function is not used by the driver. It's also suffering from bitrot
since COMEDI_MDEMAND and COMEDI_MCONTS are not defined anywhere. Just
remove the code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2801: convert printk() messages to dev_dbg()

Convert all the printk() messages in this driver to dev_dbg().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2801: remove commented out printk()

This printk is just added noise. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2801: remove disabled code in dt2801_writedata

The code that checks the DT_S_READY status is disabled. Just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: convert a printk(KERN_ERR to a dev->err()

Convert this printk message to a dev_err() message.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: tidy up the irq support in dmm32at_attach()

An irq is only needed by this driver in order to support async commands.
Since it is optional, modify the attach so that if the request_irq() fails
the attach does not fail.

Remove the printk noise about the irq.

Only hookup the async command support if the request_irq() was successful.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: remove commented out printk debug

These printk messages are just added noise. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: remove unnecessary printk noise

A timeout will return -ETIMEDOUT. The printks are just added noise.
Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16m1: tidy up the irq support in das16m1_attach()

An irq is only needed by this driver in order to support async commands.
Since it is optional, modify the attach so that if an invalid irq is
selected by the user, or the request_irq() fails, the attach does not
fail.

Remove all the printk noise about the irq.

Only hookup the async command support if the request_irq() was successful.

Tidy up das16m1_irq_bits() a bit. This helper returns the value that needs
to be written to the DAS16M1_INTR_CONTROL register to setup the irq routing.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcimdas: remove unnecessary printk noise

The ai read timeout will return -ETIMEDOUT. The printk is just added
noise. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcimdas: remove commented out irq init code

This driver does not have interrupt support. Remove the commented out
code that requests the irq.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: c6xdigio: remove commented out function trace messages

These commented out messages are just added noise. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: c6xdigio: remove commented out subdevice code

The code to initialize subdevice[2] is commented out and incomplete.
Just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adq12b: remove commented out debug message

Remove the commented out message, it would just be added noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: convert some printk's to dev_dbg()

Convert these messages to dev_dbg() and tidy them up a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: convert some printk's to dev_dbg()

Convert these warning messages to dev_dbg() to minimize the noise.
Also, tidy them up a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl812: convert some printk's to dev_dbg()

Convert these debug messages to dev_dbg() and tidy them up a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: remove final attach noise and fix return value

The "success" message after an attach is just added noise. Remove it.

The normal return value for "success" is 0.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: convert some printk's to dev_dbg()

Convert these debug messages to dev_dbg().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmmio.c: remove kcalloc() failure message

An allocation failure will have already displayed a message.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: usbip: vhci_hcd.c: removed a space

Line 921: Removed the space before the semicolon.

Signed-off-by: Aldo Iljazi <mail@aldo.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: ft1000: ft1000-usb: ft1000_debug.c: check return value of get_user() in ft1000_ioctl()

get_user() may fail and cause 'msgsz' uninitialized, so need give a
check. The related warning (with allmodconfig under hexagon):

    CC [M]  drivers/staging/ft1000/ft1000-usb/ft1000_debug.o
  drivers/staging/ft1000/ft1000-usb/ft1000_debug.c: In function 'ft1000_ioctl':
  include/uapi/linux/swab.h:53:9: warning: 'msgsz' may be used uninitialized in this function [-Wuninitialized]
  drivers/staging/ft1000/ft1000-usb/ft1000_debug.c:533:17: note: 'msgsz' was declared here

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix potential NULL pointer dereference

The rest of the code seem to imply that rmf_dumper may indeed be
NULL.  Change the code so that dumping is not even considered if
rmf_dumper callback is not set.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: silicom: remove dead code

bus_info field of struct ethtool_drvinfo is an array thus it always
evaluates to true in a boolean context.  Therefore operation
depending on it being false will never be executed.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: dgnc: dgnc_trace.c: fixed coding style issues

Fixed the following coding style issues:

Lines 66-70: Replaced spaced with tabs.
Lines 75, 98, 182: Inserted space before the open parenthesis.
Line 89: Inserted spaces around that '='

Signed-off-by: Aldo Iljazi <mail@aldo.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: fix error return code in rtsx_probe()

Fix to return -ENOMEM instead of 0 when the memory alloc fail
in probe error handling path.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: dwc2: hcd.c: Fixed a coding style issue

Fixed a coding style issue, specifically:

Line 1798: Removed parentheses since return is not a function.

Signed-off-by: Aldo Iljazi <mail@aldo.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dwc2: set up all module params

The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non-
default parameters. Select these based on the compatible value from the
DT node. For all other HW, fall back to the default parameters currently
in use.

The values in params_bcm2835[] were posted to the mailing list by Paul
quite some time ago. I made a couple of minor modifications since then;
to set ahbcfg instead of ahb_single, and to set uframe_sched.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: fix used uninitialized warning

Got below warning when building with sparc:
drivers/staging/lustre/lustre/llite/file.c: In function 'll_file_aio_write':
drivers/staging/lustre/lustre/llite/file.c:1247:9: warning: 'count' may be used uninitialized in this function [-Wuninitialized]
drivers/staging/lustre/lustre/llite/file.c: In function 'll_file_aio_read':
drivers/staging/lustre/lustre/llite/file.c:1188:9: warning: 'count' may be used uninitialized in this function [-Wuninitialized]

Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix defined not used warning

register_sysctl_table/unregister_sysctl_table are defined
regardless of CONFIG_SYSCTL true or false. so we don't need
to surround them with #ifdef CONFIG_SYSCTL. Besides, current
code got build warnings when CONFIG_SYSCTL is not set:
drivers/staging/lustre/lustre/libcfs/linux/linux-proc.c:368:20: warning:
‘lnet_table’ defined but not used [-Wunused-variable]

Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: move obd_sysctl_init out of class_procfs_init

It is not strictly related to procfs. Besides, we already call obd_sysctl_clean
outside of class_procfs_clean.

Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ldlm: inline ldlm_proc_setup

Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: lprocfs_{alloc_stats,register} always defined

No need to surround them with #ifdef LPROCFS.

Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: fix false used uninitialized warning

Got below warning when building lustre with 4.7.3.
drivers/staging/lustre/lustre/obdclass/llog_test.c: In function ‘
llog_test_init’:
drivers/staging/lustre/lustre/obdclass/llog_test.c:1058:28: warning: ‘
lvars.module_vars’ is used uninitialized in this function
[-Wuninitialized]

Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: better error handling in ptlrpcd_start

This is only part of the original Lustre tree commit. It cleans up
ptlrpcd_start error handling a bit.

Lustre-change: http://review.whamcloud.com/6139
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3204
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: remove unuse variables from lprocfs_stats_collect/clear

This is only part of the original Lustre tree commit splitted to follow the
"one thing per patch" rule.

Lustre-change: http://review.whamcloud.com/6139
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3204
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/pinger: remove never implemented suspend timeouts functionality

This is part of original Lustre tree commit. It removes never implemented
suspend timeouts functionality from pinger.c which was commented out
since 2007 and going to be replaced by adaptive timeouts. Also removed all
references to this functionality from ldlm_lockd.c, ldlm_request.c and
import.c which actually nevers executes or do nothing.

Lustre-change: http://review.whamcloud.com/6139
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3204
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: clean up SET_BUT_UNUSED/UNUSED macros

This is SET_BUT_UNUSED/UNUSED macro cleaning up part
of the original Lustre tree commit.

Lustre-change: http://review.whamcloud.com/6139
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3204
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: extended attribute cache

This patch implements an extended attribute cache for
a Lustre client. It is organized as a write-through
cache: reads are performed from cache, updates are sent
synchronously to the MDS. An additional inode bit
MDS_INODELOCK_XATTR is added to protect the cache.

Lustre-change: http://review.whamcloud.com/5537
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2869
Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
[remove extra GPL notice in original patch as kernel already has one
and it causes checkpatch error. -- Peng Tao]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/hsm: Add hsm_release feature.

HSM Release is one of the key feature of HSM. To perform HSM
release, clients need to acquire the file lease exclusivelt and
flush dirty cache from clients. A special close REQ will be sent
to the MDT to release the lease and get rid of OST objects.

Lustre-change: http://review.whamcloud.com/7028
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1333
Signed-off-by: Aurelien Degremont <aurelien.degremont@cea.fr>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: Fix a crash when dereferencing NULL pointer

When a system runs out of memory and the function
ptlrpc_register_bulk() is called from ptl_send_rpc() the call to
LNetMEAttach() fails due to failure to allocate memory.  This forces
the code into an error path, which most probably previously went
untested.  The error path:
if (rc != 0) {
        CERROR("%s: LNetMEAttach failed x"LPU64"/%d: rc = %dn",
                desc->bd_export->exp_obd->obd_name, xid,
                posted_md, rc);
        break;
}
This print assumes that desc->bd_export is not NULL.  However, it is.
In fact it is expected to be NULL.  desc->bd_import is the correct
structure to access in this case.

Lustre-change: http://review.whamcloud.com/7121
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3585
Cc: stable <stable@vger.kernel.org> # 3.12
Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>