Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: fix host device registering when nodemgr disabled
  ieee1394: video1394: DMA fix
  ieee1394: raw1394: prevent unloading of low-level driver
  ieee1394: dv1394: tidy up card removal
  ieee1394: dv1394: fix CardBus card ejection
  ieee1394: sbp2: lower block queue alignment requirement
  ieee1394: sbp2: remove bogus "emulated" host flag
  ieee1394: save one word in struct hpsb_host
  ieee1394: restore config ROM when resuming
  ieee1394: ohci1394: drop pcmcia-cs compatibility code
  ieee1394: nodemgr: check info_length in ROM header earlier
  the scheduled IEEE1394_OUI_DB removal
  the scheduled IEEE1394_EXPORT_FULL_API removal
  ieee1394: sbp2: use a better wildcard for blacklist
  Add PCI class ID for firewire OHCI controllers.
  ieee1394: modified csr1212_key_id_type_map to support lisight

[PATCH] kbuild: more Makefile cleanups

This adds the remaining changes which should have been part of the
review process.

 - the define command is inappropriate (it's primarily for rule
   definitions)
 - execute commands in the current dir as all other commands
 - .*.tmp (but not .*.null) files are also removed up by "make clean"
 - printf has other side effects, just use "echo -e"
 - proper quoting
 - proper indentation

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-apm

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-apm:
  [APM] SH: Convert to use shared APM emulation.
  [APM] MIPS: Convert to use shared APM emulation.
  [APM] ARM: Convert to use shared APM emulation.
  [APM] Add shared version of APM emulation

[PATCH] SH vdso: use install_special_mapping()

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] powerpc vDSO: use install_special_mapping

This patch uses install_special_mapping for the powerpc vDSO setup,
consolidating duplicated code.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] x86_64 ia32 vDSO: use install_special_mapping

This patch uses install_special_mapping for the ia32 vDSO setup, consolidating
duplicated code.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] i386 vDSO: use install_special_mapping

This patch uses install_special_mapping for the i386 vDSO setup, consolidating
duplicated code.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Add install_special_mapping

This patch adds a utility function install_special_mapping, for creating a
special vma using a fixed set of preallocated pages as backing, such as for a
vDSO.  This consolidates some nearly identical code used for vDSO mapping
reimplemented for different architectures.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mm: show bounce pages in oom killer output

Also split that long line up - people like to send us wordwrapped oom-kill
traces.

Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] enable mouse button 2+3 emulation for x86 macs

As macbook/macbook pro's also have to live with a single mouse button the
following patch just enables the Macintosh device drivers menu in Kconfig +
adds the macintosh dir to the obj-* to make macbook* users happy (who use
exactly that since months....

Signed-off-by: Soeren Sonnenburg <kernel@nn7.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] v9fs_vfs_mkdir(): fix a double free

Fix a double free of "dfid" introduced by commit
da977b2c7eb4d6312f063a7b486f2aad99809710 and spotted by the Coverity
checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] md: avoid possible BUG_ON in md bitmap handling

md/bitmap tracks how many active write requests are pending on blocks
associated with each bit in the bitmap, so that it knows when it can clear
the bit (when count hits zero).

The counter has 14 bits of space, so if there are ever more than 16383, we
cannot cope.

Currently the code just calles BUG_ON as "all" drivers have request queue
limits much smaller than this.

However is seems that some don't.  Apparently some multipath configurations
can allow more than 16383 concurrent write requests.

So, in this unlikely situation, instead of calling BUG_ON we now wait
for the count to drop down a bit.  This requires a new wait_queue_head,
some waiting code, and a wakeup call.

Tested by limiting the counter to 20 instead of 16383 (writes go a lot slower
in that case...).

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: fix a race in closing NFSd connections

If you lose this race, it can iput a socket inode twice and you get a BUG
in fs/inode.c

When I added the option for user-space to close a socket, I added some
cruft to svc_delete_socket so that I could call that function when closing
a socket per user-space request.

This was the wrong thing to do.  I should have just set SK_CLOSE and let
normal mechanisms do the work.

Not only wrong, but buggy.  The locking is all wrong and it openned up a
race where-by a socket could be closed twice.

So this patch:
  Introduces svc_close_socket which sets SK_CLOSE then either leave
  the close up to a thread, or calls svc_delete_socket if it can
  get SK_BUSY.

  Adds a bias to sk_busy which is removed when SK_DEAD is set,
  This avoid races around shutting down the socket.

  Changes several 'spin_lock' to 'spin_lock_bh' where the _bh
  was missing.

Bugzilla-url: http://bugzilla.kernel.org/show_bug.cgi?id=7916

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] md: fix various bugs with aligned reads in RAID5

It is possible for raid5 to be sent a bio that is too big for an underlying
device.  So if it is a READ that we pass stright down to a device, it will
fail and confuse RAID5.

So in 'chunk_aligned_read' we check that the bio fits within the parameters
for the target device and if it doesn't fit, fall back on reading through
the stripe cache and making lots of one-page requests.

Note that this is the earliest time we can check against the device because
earlier we don't have a lock on the device, so it could change underneath
us.

Also, the code for handling a retry through the cache when a read fails has
not been tested and was badly broken.  This patch fixes that code.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: "Kai" <epimetreus@fastmail.fm>
Cc: <stable@suse.de>
Cc: <org@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hugetlb: preserve hugetlb pte dirty state

__unmap_hugepage_range() is buggy that it does not preserve dirty state of
huge_pte when unmapping hugepage range.  It causes data corruption in the
event of dop_caches being used by sys admin.  For example, an application
creates a hugetlb file, modify pages, then unmap it.  While leaving the
hugetlb file alive, comes along sys admin doing a "echo 3 >
/proc/sys/vm/drop_caches".

drop_pagecache_sb() will happily free all pages that aren't marked dirty if
there are no active mapping.  Later when application remaps the hugetlb
file back and all data are gone, triggering catastrophic flip over on
application.

Not only that, the internal resv_huge_pages count will also get all messed
up.  Fix it up by marking page dirty appropriately.

Signed-off-by: Ken Chen <kenchen@google.com>
Cc: "Nish Aravamudan" <nish.aravamudan@gmail.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: <stable@kernel.org>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ufs: restore back support of openstep

This is a fix of regression, which triggered by ~2.6.16.

Patch with name ufs-directory-and-page-cache-from-blocks-to-pages.patch: in
additional to conversation from block to page cache mechanism added new
checks of directory integrity, one of them that directory entry do not
across directory chunks.

But some kinds of UFS: OpenStep UFS and Apple UFS (looks like these are the
same filesystems) have different directory chunk size, then common
UFSes(BSD and Solaris UFS).

So this patch adds ability to works with variable size of directory chunks,
and set it for ufstype=openstep to right size.

Tested on darwin ufs.

Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] rtc-pcf8563: detect polarity of century bit automatically

The usage of the century bit was inverted on 2.6.19 following to PCF8563's
description, but it was not match to usage suggested by RTC8564's
datasheet.  Anyway what MO_C=1 means can vary on each platform.  This patch
is to detect its polarity in get_datetime routine.  The default value of
c_polarity is 0 (MO_C=1 means 19xx) so that this patch does not change
current behavior even if get_datetime was not called before set_datetime.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@teamlog.com>
Cc: <stable@kernel.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-tc

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-tc:
  [EISA] EISA registration with !CONFIG_EISA
  [TC] pmagb-b-fb: Convert to the driver model
  [TC] dec_esp: Driver model for the PMAZ-A
  [TC] mips: pmag-ba-fb: Convert to the driver model
  [TC] defxx: TURBOchannel support
  [TC] TURBOchannel support for the DECstation
  [TC] MIPS: TURBOchannel resources off-by-one fix
  [TC] MIPS: TURBOchannel update to the driver model

[PATCH] uintptr_t is unsigned long, not u32

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] trivial s2io annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] trivial cxgb3 annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] pc300too annotation fixes

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hci_{read,write}l() does force casts to wrong type for no reason

readl() et.al. expect iomem pointer, so WTF force-cast it to normal one???

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] trivial usb endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] powerpc: celleb trivial endianness and iomem annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] osst endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] iscsi endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ahci: trivial endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sata_svw: trivial iomem annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] io_apic: trivial __iomem annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] misc NULL noise removal

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] kvm: NULL noise removal

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hpet: trivial __iomem annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] misc duplicate field initializers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] kvm: __user annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] offsetof is size_t

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] kill eth_io_copy_and_sum()

On all targets that sucker boils down to memcpy_fromio(sbk->data, from, len).
The function name is highly misguiding (it _never_ does any checksums), the
last argument is just a noise and simply expanding the call to memcpy_fromio()
gives shorter and more readable source.  For a lot of reasons it has almost
no remaining users, so it's better to just outright kill it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] drivers/serial NULL noise removal

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] in non-NUMA case mark GFP_THISNODE gfp_t

... operations with it are OK as is, but flags & ~0 will have no idea that
this ~0 is meant to be ~gfp_t.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] usbvision missing __user

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hwmon: ansify

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] dlm: use kern_recvmsg()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] arch/powerpc trivial annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] arch/ia64: ansify

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hidp __user annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] trivial __user annotations - rtc-dev

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[APM] SH: Convert to use shared APM emulation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[APM] MIPS: Convert to use shared APM emulation.

Also convert to use generic kernel/power/Kconfig to make the use of the
shared APM emulation possible.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[APM] ARM: Convert to use shared APM emulation.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[APM] Add shared version of APM emulation

Currently ARM and MIPS both have nearly identical copies of the APM
emulation code in their arch code.  Add yet another copy of it to
drivers char and make it selectable through SYS_SUPPORTS_APM_EMULATION.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[PATCH] missing include in macsonic

Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] spider_net breakage from class_device -> device

Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ps3: missing exports

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] TIFM should depend on PCI - TIFM_CORE leads to use of pci primitives

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] m32r: class_device -> device fallout

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ps3 usb missed the addition of new argument to ps3_alloc_io_irq()

Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] assigning enum constant to char * is vile, even if it happens to be 0

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] wrong order of kzalloc arguments

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'linus' of /linux/kernel/git/perex/alsa

* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (212 commits)
  [PATCH] Fix breakage with CONFIG_SYSFS_DEPRECATED
  [ALSA] version 1.0.14rc2
  [ALSA] ASoC documentation updates
  [ALSA] ca0106 - Add missing sysfs device assignment
  [ALSA] aoa i2sbus: Stop Apple i2s DMA gracefully
  [ALSA] hda-codec - Add support for Fujitsu PI1556 Realtek ALC880
  [ALSA] aoa: remove suspend/resume printks
  [ALSA] Fix possible deadlocks in sequencer at removal of ports
  [ALSA] emu10k1 - Fix STAC9758 front channel
  [ALSA] soc - Clean up with kmemdup()
  [ALSA] snd-ak4114: Fix two array overflows
  [ALSA] ac97_bus power management
  [ALSA] usbaudio - Add support for Edirol UA-101
  [ALSA] hda-codec - Add ALC861VD/ALC660VD support
  [ALSA] soc - ASoC 0.13 Sharp poodle machine
  [ALSA] soc - ASoC 0.13 Sharp tosa machine
  [ALSA] soc - ASoC 0.13 spitz machine
  [ALSA] soc - ASoC Sharp corgi machine
  [ALSA] soc - ASoC 0.13 pxa2xx DMA
  [ALSA] soc - ASoC 0.13 pxa2xx AC97 driver
  ...

[EISA] EISA registration with !CONFIG_EISA

This is a change for the EISA bus support to permit drivers to call
un/registration functions even if EISA support has not been enabled.  This is
similar to what PCI (and now TC) does and reduces the need for #ifdef clutter.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[TC] pmagb-b-fb: Convert to the driver model

This is a set of changes to convert the driver to the driver model.  As a
side-effect the driver now supports building as a module.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[TC] dec_esp: Driver model for the PMAZ-A

This is a set of changes that converts the PMAZ-A support to the driver model.

The use of the driver model required switching to the hotplug SCSI
initialization model, which in turn required a change to the core NCR53C9x
driver.  I decided not to break all the frontend drivers and introduced an
additional parameter for esp_allocate() to select between the old and the new
model.  I hope this is OK, but I would be fine with converting NCR53C9x to the
new model unconditionally as long as I do not have to fix all the other
frontends (OK, perhaps I could do some of them ;-) ).

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[TC] mips: pmag-ba-fb: Convert to the driver model

This is a set of changes to convert the driver to the driver model.  As a
side-effect the driver now supports building as a module.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[TC] defxx: TURBOchannel support

This is a set of changes to add TURBOchannel support to the defxx driver.  As
at this point the EISA support in the driver has become the only not having
been converted to the driver model, I took the opportunity to convert it as
well.  Plus support for MMIO in addition to PIO operation as TURBOchannel
requires it anyway.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[TC] TURBOchannel support for the DECstation

This is the platform-specific part of TURBOchannel bus support for the
DECstation.  It implements determining whether the bus is actually there,
getting bus parameters, IRQ assignments for devices and protected accesses
to possibly unoccupied slots that may trigger bus error exceptions.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[TC] MIPS: TURBOchannel resources off-by-one fix

Fix resource reservation of TURBOchannel areas, where the end is one byte
too far.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[TC] MIPS: TURBOchannel update to the driver model

This is a set of changes to convert support for the TURBOchannel bus to the
driver model.  It implements the usual set of calls similar to what other bus
drivers have: tc_register_driver(), tc_unregister_driver(), etc.  All the
platform-specific bits have been removed and headers from asm-mips/dec/ have
been merged into linux/tc.h, which should be included by drivers.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Merge branch 'for-linus' of git://atmel.no/~hskinnemoen/linux/kernel/avr32

* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32:
  [AVR32] Add missing #include <linux/module.h>
  [AVR32] ssize_t should be long, not int
  [AVR32] Remove last remains of libgcc
  [AVR32] SPI platform code update
  [AVR32] Add PIOE device and reserve SDRAM pins
  [AVR32] Introduce at32_reserve_pin()
  [AVR32] Don't reset PIO state at bootup
  [AVR32] GPIO API implementation
  [AVR32] Use ARRAY_SIZE macro when appropriate
  [AVR32] Implement dma_mapping_error()
  [AVR32] Fix incorrect invalidation of shared cachelines
  [AVR32] ext int fixes
  [AVR32] fix serial port setup on ATSTK1000
  [AVR32] /proc/interrupts display
  Remove a couple final references to obsolete verify_area().

[PATCH] mm: remove find_trylock_page

Remove find_trylock_page as per the removal schedule.

Signed-off-by: Nick Piggin <npiggin@suse.de>
[ Let's see if anybody screams ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (79 commits)
  [IPX]: Fix NULL pointer dereference on ipx unload
  [ATM]: atmarp.h needs to always include linux/types.h
  [NET]: Fix net/socket.c warnings.
  [NET]: cleanup sock_from_file()
  [NET]: change layout of ehash table
  [S390]: Add AF_IUCV socket support
  [S390]: Adapt special message interface to new IUCV API
  [S390]: Adapt netiucv driver to new IUCV API
  [S390]: Adapt vmlogrdr driver to new IUCV API
  [S390]: Adapt monreader driver to new IUCV API
  [S390]: Rewrite of the IUCV base code, part 2
  [S390]: Rewrite of the IUCV base code, part 1
  [X.25]: Adds /proc/net/x25/forward to view active forwarded calls.
  [X.25]: Adds /proc/sys/net/x25/x25_forward to control forwarding.
  [X.25]: Add call forwarding
  [XFRM]: xfrm_migrate() needs exporting to modules.
  [PFKEYV2]: CONFIG_NET_KEY_MIGRATE option
  [PFKEYV2]: Extension for dynamic update of endpoint address(es)
  [XFRM]: CONFIG_XFRM_MIGRATE option
  [XFRM]: User interface for handling XFRM_MSG_MIGRATE
  ...

Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  MAINTAINERS: update DMFE and wireless drivers mailing list
  ucc_geth: Add support to local-mac-address property
  ucc_geth: Remove obsolete workaround of link speed change
  cxgb3: sysfs attributes in -mm tree
  Add Attansic L1 ethernet driver.

[PATCH] Fix breakage with CONFIG_SYSFS_DEPRECATED

The fix for sysfs breakage with CONFIG_SYSFS_DEPRECATED was flown
away by the conflicted merge of the ALSA git tree.  The patch below
fixes it again.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[AVR32] Add missing #include <linux/module.h>

arch/avr32/kernel/cpu.c needs THIS_MODULE, so it must include
linux/module.h.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

[AVR32] ssize_t should be long, not int

Since size_t is defined as unsigned long, ssize_t ought to be long
and not int. It could have been the other way around, but gcc defines
size_t as unsigned long, so this is correct.

This fixes a couple of printk format warnings.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

[AVR32] Remove last remains of libgcc

Two libgcc headers were left around even though all the actual code
borrowed from libgcc is gone. Delete them.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

[AVR32] SPI platform code update

Move stuff in spi.c into ATSTK1002 board code and update SPI
platform device definitions according to the new GPIO API.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

[AVR32] Add PIOE device and reserve SDRAM pins

The PIOE device was left out before because it muxes SDRAM pins (and
is therefore a bit dangerous to mess with) and because no existing
drivers had any use for it.

It is needed for CompactFlash, however, and now that we have a way
to protect the SDRAM pins, it can be safely added.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

[AVR32] Introduce at32_reserve_pin()

at32_reserve_pin() can be used for reserving portmux pins without
altering their configuration. Useful for e.g. SDRAM pins where we
really don't want to change the bootloader-provided configuration.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

[AVR32] Don't reset PIO state at bootup

Leave the PIO lines as the bootloader left them. This allows us to
use PIOE without disturbing the SDRAM muxing.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

[AVR32] GPIO API implementation

Arch-neutral GPIO calls for AVR32. GPIO IRQ support written by
David Brownell.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

[AVR32] Use ARRAY_SIZE macro when appropriate

A patch to use ARRAY_SIZE macro already defined in linux/kernel.h

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

[AVR32] Implement dma_mapping_error()

dma_map_single() never fails, so dma_mapping_error() simply returns 0.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

[AVR32] Fix incorrect invalidation of shared cachelines

Fix bug in dma_map_single(..., DMA_FROM_DEVICE) caused by incorrect
invalidation of shared cachelines at the beginning and/or end of
the specified buffer.  Those shared cachelines need to be flushed,
since they may hold valid data (which must not be discarded).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

[AVR32] ext int fixes

Bugfixes for external irq handler set_irq_type():

 - If set_irq_type() can't set the type, don't change anything!

 - It's not OK to change the flow handler as part of set_irq_type(),
   among other issues that violates spinlock rules.  Instead, we can
   call the relevant handler when we demux the external interrupts.

 - The external irq demux has no need to grab the spinlock.  And in
   fact grabbing it that way was wrong, since that code might be
   pre-empted by an irq at a different priority level, and that code
   might then have tried to grab that spinlock...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

[AVR32] fix serial port setup on ATSTK1000

Fixes to USART setup on the stk-1000 ... don't configure USART 2, since
its TXD/RXD are used for INT-A and INT-B buttons; and configure USART 0
(for IRDA, and with corrected IRQ) iff SW2 has a non-default setting.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

[AVR32] /proc/interrupts display

The /proc/interrupts file should also display the irq_chip associated
with each irq ... e.g. INTC, EIM, GPIO.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Remove a couple final references to obsolete verify_area().

  Remove a couple final references to the obsolete verify_area() call,
which was long ago replaced by access_ok().

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

[ALSA] version 1.0.14rc2

Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ASoC documentation updates

This patch updates the documentation for ASoC to reflect the recent
changes in API between 0.12.x and 0.13.x
Changes:-
 o Removed all reference to old API's.
 o Removed references and examples of automatic DAI config and matching.
 o Fixed 80 char line length on some files.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ca0106 - Add missing sysfs device assignment

Added the missing device assignment before creating sysfs tree.
This caused the insufficient device permissions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] aoa i2sbus: Stop Apple i2s DMA gracefully

This fixes the problem of getting extra bytes inserted at the
beginning of a recording when using the Apple i2s interface and DBDMA
controller.  It turns out that we can't just abort the DMA; we have to
let it stop at the end of a command, and then wait for the S7 bit to
be set before turning off the DBDMA controller.  Doing that for
playback doesn't seem to be necessary, but doesn't hurt either.
We use the technique used by the Darwin driver: make each transfer
command branch to a stop command if the S0 status bit is set.  Thus we
can ask the DMA controller to stop at the end of the current command
by setting S0.
The interrupt routine now looks at and clears the status word of the
DBDMA command ring.  This is necessary so it can know when the DBDMA
controller has seen that S0 is set, and so when it should look for the
DBDMA controller being stopped and S7 being set.  This also ended up
simplifying the calculation in i2sbus_pcm_pointer.
Tested on a 15 inch albook.
[Addition by Johannes]
I modified this patch and added the suspend/resume bits to it to get my
powermac into a decent state when playing sound across suspend to disk
that has a different bitrate from what the firmware programs the
hardware to.
I also added the SNDRV_PCM_INFO_JOINT_DUPLEX flag because it seemed the
right thing to do and I was looking at the info stuff.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Add support for Fujitsu PI1556 Realtek ALC880

This patch adds support for the Fujitsu PI1556 laptop.
Issue:  Volume knob on system maxes out lower than alsamixer (0x35 vs 0x40).
Everything else works, and audio quality is good at 0x35.

Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] aoa: remove suspend/resume printks

This just removes two useless printks.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Fix possible deadlocks in sequencer at removal of ports

Fix possible rwsem deadlocks in sequencer code at removal of
sequencer ports.  The list_lock of port group can be double
locked.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] emu10k1 - Fix STAC9758 front channel

For some time now, some users of STAC9758 (emu10k1) would have no sound on
their front channels. This can be fixed (at least for me) by unmuting  head
phone volume and setting it to 0dB before removing the 'Front Playback'
control. For details, cf.
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2308
Find the appropriate patch attached.
Credits to: Raymond

Signed-off-by: Rolf Stefan Wilke <stefan.wilke@uni-ulm.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] soc - Clean up with kmemdup()

Clean up by replacing with kmemdup().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] snd-ak4114: Fix two array overflows

Fix the handling of the TXCSB registers cache. There was one array
overflow in reg_write() and one in snd_ak4114_reg_write(). Thanks
to David Binderman for reporting the latter.
The second overflow probably doesn't matter much, given that the
function snd_ak4114_reg_write() appears to be never called. I wonder
why it exists and why it is exported.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ac97_bus power management

This patch adds CONFIG_PM to the ac97_bus driver.

Signed-off-by: Martin Langer <martin-langer@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] usbaudio - Add support for Edirol UA-101

Added support for the Edirol UA-101 (only in high-speed mode) by taking
the quirks for the UA-1000 and change them accordingly. Changes were
made in 'usbaudio.c', 'usbaudio.h', and 'usbquirks.h'
MIDI and recording seem to work perfectly (with JACK), but playback
gives some few glitches. I think that's the mentioned
synchronizing-problem in the UA-1000 quirk ('FIXME: playback must be
synchronized to capture'), so I didn't change that.
ToDo: Adding Mixer-Support for the built-in
control-panel/patch-bay/router.

Signed-off-by: Bjoern Fay <mail@bfay.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Add ALC861VD/ALC660VD support

o Added ALC861VD support to patch_realtek.c under hda-intel
o Added ALC660VD as a model of 861VD
o Added pci quirks for Asus G1 as well as for two devices found in Realtek's
driver to point at ALC660VD model (3stack-660)
o Added pci quirk for Lenovo 3000 C200 - although untested, it should work
with ALC861VD 3stack model
o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of
patch_861
o Organised the list of presets

Signed-off-by: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>