[PATCH] x86_64: No need to remove NT during CPU setup

head.S already clears EFLAGS completely. Following an i386 patch from
Zachary Amsden.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Minor GFP_DMA32 comment fix

Pretty obvious

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Adjust page fault handling

Adjust page fault protection error check before considering it to be
a vmalloc synchronization candidate.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove unprotected iret

Make sure no iret can fault without attached recovery code.
Cannot happen in the normal case, but might be useful
with kernel debuggers

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Clean up double fault handling

Since a double fault always implies that kernel data structures are
corrupt, this fault should neither be handed to user mode handling,
nor should the handler allow resuming the faulting code stream (since
architecturally this isn't a fault, but an abort).

Note that this slightly depends on the previously submitted patch
adjusting the prototype of notify_die() (a compiler warning will result
without that other patch).

AK: Removed obsolete CONFIG_CHECKING code, added comments

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: make trap information available to die notification handlers

This adjusts things so that handlers of the die() notifier will have
sufficient information about the trap currently being handled. It also
adjusts the notify_die() prototype to (again) match that of i386.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Removing unused function die_if_kernel().

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: fix bound check IDT gate

Other than apparently commonly assumed, the bound instruction does not
require the corresponding IDT entry to have DPL 3.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Separate CONFIG_UNWIND_INFO from CONFIG_DEBUG_INFO

As a follow-up to the introduction of CONFIG_UNWIND_INFO, this
separates the generation of frame unwind information for x86-64 from
that of full debug information.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Support constant TSC feature in future AMD CPUs.

Based on the documentation recently posted by Richard Brunner.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: More CFI fixes for 32bit entry code

Frame unwind information was still incorrect for ia32_ptregs_common
(sorry, my fault), and could be improved for some of the other entry
points.

Signed-Off-By: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Update defconfig

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] lindent rio drivers

Run all rio files through indent -kr -i8 -bri0 -l255, as requested by Alan.

rioboot.c and rioinit.c were skipped due to worrisome lindent warnings.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] capable/capability.h (arch/)

arch: Use <linux/capability.h> where capable() is used.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] capable/capability.h (net/)

net: Use <linux/capability.h> where capable() is used.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] capable/capability.h (fs/)

fs: Use <linux/capability.h> where capable() is used.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] move capable() to capability.h

- Move capable() from sched.h to capability.h;

- Use <linux/capability.h> where capable() is used
(in include/, block/, ipc/, kernel/, a few drivers/,
mm/, security/, & sound/;
many more drivers/ to go)

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uninline capable()

Uninline capable().  Saves 2K of kernel text on a generic .config, and 1K on a
tiny config.  In addition it makes the use of capable more consistent between
CONFIG_SECURITY and !CONFIG_SECURITY

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ipmi: use CONFIG_DMI instead of CONFIG_X86

With Andi Kleen's x86_64 patch to use DMI, and my ia64 to use DMI, there is
now a new CONFIG_DMI option which takes the place of CONFIG_X86 to denote
the availability of the DMI functions.  Make the IPMI driver use CONFIG_DMI
instead.

Tested on ia64 2.6.15 kernel plus the previous patch, on a Dell PowerEdge
7250 Itanium2 server, and it now autodetects the IPMI KCS driver as
expected.

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Acked-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] remove unused out_pio label in i810_audio

sound/oss/i810_audio.c:3431: warning: label `out_pio' defined but not used

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] kprobes: fix race in recovery of reentrant probe

There is a window where a probe gets removed right after the probe is hit
on some different cpu.  In this case probe handlers can't find a matching
probe instance related to break address.  In this case we need to read the
original instruction at break address to see if that is not a break/int3
instruction and recover safely.

Previous code had a bug where we were not checking for the above race in
case of reentrant probes and the below patch fixes this race.

Tested on IA64, Powerpc, x86_64.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] kprobes: fix unloading of self probed module

When a kprobes modules is written in such a way that probes are inserted on
itself, then unload of that moudle was not possible due to reference
couning on the same module.

The below patch makes a check and incrementes the module refcount only if
it is not a self probed module.

We need to allow modules to probe themself for kprobes performance
measurements

This patch has been tested on several x86_64, ppc64 and IA64 architectures.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] reiserfs: fix assertion failure in reiserfs+journaled quotas

Sometimes we call do_journal_end() with t_refcount == 0.  If quota is
turned on and we happen to have some inode with preallocation bad things
happen as we try to use the current handle for quota operations.  Checks
for t_refcount in journal_begin() fail and we Oops.  We raise t_refcount to
make those checks happy.  We should not cause any bad as all the needed
quota blocks should be already attached to the transaction (they were
attached to the transaction when we allocated those preallocation blocks).

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <mason@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] synclink_gt remove unnecessary page alignment

Remove unnecessary and incorrectly implemented page alignment of register
base address before calling ioremap()

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] random: get rid of sparse warning

Get rid of bogus extern attribute that causes sparse warning.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] MAINTAINERS: remove dead project

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] kdump: vmcore compilation warning fix

o fs/proc/vmcore.c compilation gives warnings on ppc64. The reason being
  that u64 is defined as unsigned long hence u64* is not same as loff_t*
  and compiler cribs.

o Changed the parameter type to u64* instead of loff_t* to resolve the
  conflict.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cs89x0: Fix the Kconfig help text

Fix the help text of the cs89x0 network driver Kconfig entry.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cs89x0: fix setting of ALLOW_DMA

There's an ifdef in cs89x0.c that seems to have been the wrong way round
since it was merged (and noone seems to have noticed) -- the IXDP2x01
doesn't support ISA-style DMA, but when building for IXDP2x01, cs89x0's
ALLOW_DMA is set to 1, and when building for another platform, ALLOW_DMA is
set to 0.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] tclk: fix typos, exclamation mark frenzy and missing device id on messages

I sent this out a couple of months ago and the driver author said it
he'd merge it. Nothing has happened since so I'm submitting it directly.

No functionality changes just texts.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Allow reading CMOS day of week register

Someone wanted access to this usually unused (and unused by Linux) value
for the day of week.  Existing kernels have the field in the struct but
return 0 always.  This updates the kernel to fill in the field.  The usual
case of 'not set' conveniently is 0.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext3: fix documentation of online resizing

Undocument the non-working resize= mount option in ext3, and add some
references to the ext2resize package instead, which appears to be the only
proper way of doing online resizing of ext3 filesystems.

Signed-off-by: Tore Anderson <tore@fud.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] doc: refer to kdump in oops-tracing.txt

Kdump has been merged and supported on several architectures.  It is better
to encourage to use kdump rather than non standard kernel crash dump
patches.

Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] kdump: add dmesg gdbmacro into document

Add gdb macro which print the kernel ring buffer into kdump docs

Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: kill an unused variable

The HDIO_GETGEO patch left an unused variable in the UML block driver.  This
gets rid of it.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: fix debug output on x86_64

The debug-stub patch was broken on x86_64 because it thinks the frame size
there is 168 words.  In reality, it is 168 bytes, and using HOST_FRAME_SIZE,
which is expressed in consistent units across architectures, fixes this.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: eliminate doubled boot output

CON_PRINTBUFFER was a bad idea for the mconsole console.  It causes the boot
output to be printed twice.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: revert compile-time option checking

Undo the previous no-modes patch since Adrian Bunk sent in a kbuild way of
doing the same thing.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: update Kconfig help

The MODE_TT help was a little outdated.  This updates it in light of the
existence of skas0 mode.  It's also turned off by default since it is mostly
obsoleted by skas0 mode.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: fix missing KBUILD_BASENAME

2.6.15-mm1 caused kernel-offsets.c to stop compiling with a syntax error in a
header.  The problem was with KBUILD_BASENAME, which didn't get a definition
with the by-hand compilation in the main UML Makefile.

This was OK before since the expansion was syntactically the same as the
KBUILD_BASENAME token.  With -mm1, the expansion is now a quote-delimited
string, so there needs to be a definition of it.

Since kernel-offsets.c is basically the same as other arches' asm-offsets.c,
and those seem to build OK, this patch turns kernel-offsets.c into
asm-offsets.c.  kernel-offsets.c is in arch/um/sys-$(SUBARCH), i.e.  sys-i386
and sys-x86_64, while kbuild expects it to be in arch/um/kernel.
kernel-offsets.c is moved to
arch/um/include/sysdep-$(SUBARCH)/kernel-offsets.h, which is included by
arch/um/kernel/asm-offsets.c.  With that, include/asm-um/asm-offsets.h is
generated automatically.  kernel-offsets.h continues to exist because it needs
to be accessible to userspace UML code, and include/asm-um isn't.  So, a
symlink is made from arch/um/include/kernel-offsets.h to
include/asm-um/asm-offsets.h.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] include/asm-h8300/page.h: remove unused KTHREAD_SIZE #define

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mm: gfp_atomic comments

Clarify in comments that GFP_ATOMIC means both "don't sleep" and "use
emergency pools", hence both ALLOC_HARDER and ALLOC_HIGH.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Restore KERN_EMERG to each line printed by bad_page

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge /pub/scm/linux/kernel/git/davem/net-2.6

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

[PKT_SCHED] net/sched/Kconfig: fix typo in NET_EMATCH_META description

Noted by Matt LaPlante <webmaster@cyberdogtech.com>.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

[PKT_SCHED] ematch: Remove bogus include.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Fix diverter build.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Remove more unneeded typecasts on *malloc()

This removes more unneeded casts on the return value for kmalloc(),
sock_kmalloc(), and vmalloc().

Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Avoid calling ip6_xmit() with NULL sk

The ip6_xmit() function now assumes that its sk argument is non-NULL,
which isn't currently true when TCPv6 code is sending RST or ACK
packets. This fixes that code to use a socket of its own for sending
such packets, as TCPv4 does. (Thanks Andi for the pointer).

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: ip_ct_proto_gre_fini() cannot be __exit

It is invoked from failures paths of __init code.

Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Some more missing include/etherdevice.h includes

For compare_ether_addr()

Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] new tty buffering access fix

Fix typos in new tty buffering that incorrectly
access and update buffers in pending queue.

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[SPARC64] arch/sparc64/Kconfig: fix HUGETLB_PAGE_SIZE_64K dependencies

This patch fixes a typo in the dependencies of HUGETLB_PAGE_SIZE_64K.

It might be more logical to rename the HUGETLB_PAGE_SIZE_*K
dependencies to HUGETLB_PAGE_SIZE_*KB, but let's fix this bug first.

This bug was reported by Jean-Luc Leger <reiga@dspnet.fr.eu.org>.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix mutex_trylock() copy-and-paste bug (x86, x86-64, generic mutex-dec.h)

Noticed by Arjan originally on x86-64, then Ingo on x86, and finally me
grepping for it in the generic version.

Bad parenthesis nesting.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge git://git./linux/kernel/git/paulus/powerpc-merge

[PATCH] fix/simplify mutex debugging code

Let's switch mutex_debug_check_no_locks_freed() to take (addr, len) as
arguments instead, since all its callers were just calculating the 'to'
address for themselves anyway... (and sometimes doing so badly).

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] powerpc: Don't build crash.c for PPC32

arch/powerpc/kernel/crash.c isn't safe for PPC32 (yet?), so don't build it.

Built with CONFIG_KEXEC=y for pmac32_defconfig, pseries_defconfig,
and g5_defconfig.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[MUTEX]: linux/mutex.h needs linux/linkage.h too

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge /pub/scm/linux/kernel/git/kyle/parisc-2.6

Merge /pub/scm/linux/kernel/git/davem/net-2.6

[PATCH] powerpc: Fix clean_files in arch/powerpc/boot Makefile

clean-files was being set twice rather than being appended to.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc/32: Fix compile error caused by pud_t/pgt_t confusion

PPC32 is still using asm-generic/4level-fixup.h, but asm-powerpc/page.h
was defining pud_t and pgd_t.  Depending on the order in which files
got included, this could result in a compilation error.  Tweak the ifdef
so that page.h doesn't try to define pud_t on ppc32 (which uses 2-level
page tables).

Signed-off-by: Paul Mackerras <paulus@samba.org>

x86: fix "make install" target

Removing the dependency on the boot image build was good, but it also
meant that the $< expansion by make needed to be done explicitly.

Noted by Stephen Hemminger.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[IPV6]: Fix modular build with netfilter enabled.

Also, drop __exit marker from ipv6_netfilter_fini() as this
can be invoked from inet6_init() error handling paths.

Based upon a report from Stephen Hemminger.

Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] powerpc: Remove redundant setting of htab_address

iSeries doesn't need to set the htab_address explicitly, htab_initialize()
will do it for us later.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Add ibm,pft-size to iSeries device tree

To make iSeries just a teensy bit less special, create ibm,pft-size properties
in the iSeries device tree. We can then rely on htab_dt_scan_pftsize() to set
ppc64_pft_size for us.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Add some missing .gitignore's

ignore generated files under arch/powerpc

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Updated Kconfig and Makefiles for 83xx support

Updated Kconfig & Makefiles in prep for adding support for the Freescale
MPC83xx family of processors to arch/powerpc.  Moved around some config
options that are more globally applicable to other PowerPC processors.
Added a temporary config option (83xx) to match existing arch/ppc support
for the MPC83xx line.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] spufs: Suspend/restore MFC DMA operations at SPU context switch.

The SPE Book IV indicates that MFC DMA operations must be
suspended and restored on SPU context switch (in Step 8).

This patch adds that operation, which is missing from the
current spufs implementation.

Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: fix for compile problem in kdump code when SMP disabled

This patch fixes the compilation error (shown below) when CONFIG_SMP=n.
    arch/powerpc/kernel/crash.c: In function `crash_kexec_prepare_cpus':
    arch/powerpc/kernel/crash.c:236: error: implicit declaration of
    function `smp_release_cpus'

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: Fix compile error when CONFIG_PROC_VMCORE is not defined

We were getting elfcorehdr_addr undefined in this case.

Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: fix up iSeries console after TTY layer buffering revamp

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc/64: per cpu data optimisations

The current ppc64 per cpu data implementation is quite slow. eg:

        lhz 11,18(13)           /* smp_processor_id() */
        ld 9,.LC63-.LCTOC1(30)  /* per_cpu__variable_name */
        ld 8,.LC61-.LCTOC1(30)  /* __per_cpu_offset */
        sldi 11,11,3            /* form index into __per_cpu_offset */
        mr 10,9
        ldx 9,11,8              /* __per_cpu_offset[smp_processor_id()] */
        ldx 0,10,9              /* load per cpu data */

5 loads for something that is supposed to be fast, pretty awful. One
reason for the large number of loads is that we have to synthesize 2
64bit constants (per_cpu__variable_name and __per_cpu_offset).

By putting __per_cpu_offset into the paca we can avoid the 2 loads
associated with it:

        ld 11,56(13)            /* paca->data_offset */
        ld 9,.LC59-.LCTOC1(30)  /* per_cpu__variable_name */
        ldx 0,9,11              /* load per cpu data

Longer term we can should be able to do even better than 3 loads.
If per_cpu__variable_name wasnt a 64bit constant and paca->data_offset
was in a register we could cut it down to one load. A suggestion from
Rusty is to use gcc's __thread extension here. In order to do this we
would need to free up r13 (the __thread register and where the paca
currently is). So far Ive had a few unsuccessful attempts at doing that :)

The patch also allocates per cpu memory node local on NUMA machines.
This patch from Rusty has been sitting in my queue _forever_ but stalled
when I hit the compiler bug. Sorry about that.

Finally I also only allocate per cpu data for possible cpus, which comes
straight out of the x86-64 port. On a pseries kernel (with NR_CPUS == 128)
and 4 possible cpus we see some nice gains:

             total       used       free     shared    buffers cached
Mem:       4012228     212860    3799368          0          0 162424

             total       used       free     shared    buffers cached
Mem:       4016200     212984    3803216          0          0 162424

A saving of 3.75MB. Quite nice for smaller machines. Note: we now have
to be careful of per cpu users that touch data for !possible cpus.

At this stage it might be worth making the NUMA and possible cpu
optimisations generic, but per cpu init is done so early we have to be
careful that all architectures have their possible map setup correctly.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: parallel port init fix

This stops parport from accessing nonexistent parallel ports.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Make early debugging configurable via Kconfig

This patch adds Kconfig entries to control the early debugging options,
currently in setup_64.c.

Doing this via Kconfig rather than #defines means you can have one source tree,
which is buildable for multiple platforms - and you can enable the correct
early debug option for each platform via .config.

I made udbg_early_init() a static inline because otherwise GCC is to daft to
optimise it away when debugging is off.

Now that we have udbg_init_rtas() we can make call_rtas_display_status* static.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Early debugging support for iSeries

Connect iSeries up to the standard early debugging infrastructure.

To actually use this you need to enable the iSeries early debugging
in setup_64.c. Then after the messages are logged hit Ctrl-x Ctrl-x on
your console to dump the Hypervisor console buffer.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: remove remaining crash_notes variable from machine_kexec.c

remove remaining crash_notes definition to fix compile error

/dev/shm/linux-2.6/arch/powerpc/kernel/machine_kexec.c:21: error: conflicting types for `crash_notes'
/dev/shm/linux-2.6/include/linux/kexec.h:129: error: previous declaration of `crash_notes'

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] PCI Hotplug/powerpc: module build break

The RPAPHP hoplug driver will not build as a module, because it calls
on a pcibios routine which is not exported. This exports the symbol.
Problem reported by Olaf Hering <olh@suse.de>

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] enable the RTC driver in ppc64_defconfig

Enable the RTC driver.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Fix net/core/wireless.c link failure

It needs <linux/etherdevice.h> for compare_ether_addr()

[PARISC] Use STABS_DEBUG macro from vmlinux.lds.h

Cleanup vmlinux.lds.S by using STABS_DEBUG macro from vmlinux.lds.h
instead of repeating the sections.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] Fix Dino reporting on J2240

Fix Dino reporting on J2240. This particular machine thought it
had a Cujo. Also add J2240 Dino chip to the hp_hardware_list.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] stifb: Remove obsolete MODULE_PARM()

The bpp module parameter has been obsoleted in favour of
a setup string, so remove the MODULE_PARM.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] stifb: Fix framebuffer console at 32bpp

Fix stifb framebuffer console at 32bpp on a HCRX-24 card
by properly setting DIRECTCOLOR. Also a few nice cleanups
to the code.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] stifb: use F_EXTEND macro

Use the F_EXTEND() macro instead of open coding it with an
#ifdef. Provides a nice cleanup.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] Use C99 initializers in asm-parisc/processor.h

Cleanup asm-parisc/processor.h to use C99 initializers in
INIT_THREAD().

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] pdc_stable: More robust sysfs error checking

pdc_stable 0.10:
As mentioned on LKML, pdc_stable wasn't checky enough on the return
values of some calls. This patch makes it more robust to errors when
registering objects in sysfs.

Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] Make PCI_HOST_ADDR and PCI_BUS_ADDR symmetrical

Change to asm-parisc/pci.h makes the define of PCI_HOST_ADDR symmetrical
with PCI_BUS_ADDR. Also add a comment about PA_VIEW and LMMIO/ELMMIO/GMMIO.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] Fix parport_gsc by selecting PARPORT_NOT_PC

PARPORT_GSC requires selecting PARPORT_NOT_PC in order to
work properly.

Signed-off-by: Guy Martin <gmsoft@tuxicoman.be>
Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] OSS: Fix build of parisc harmony driver

OSS Harmony got missed on the conversion of parisc_device.hpa to a
struct resource... fix its build.

Signed-off-by: Stuart Brady <sdb@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] Fix BLK_BOUNCE_HIGH on parisc by initializing max_low_pfn

max_low_pfn was not being set in arch/parisc/mm/init.c, causing severe
problems whenever anything tried to use BLK_BOUNCE_HIGH. Set it to
max_pfn like other similar architectures do.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] Truncate overlapping PAT PDC reported ranges

Deal with overlapping LBA MMIO resources,

rp3440 PDC BUG: PDC reports lmmio range for the last rope that overlaps
with the CPU HPA. Console output was:

...
Found devices:
1. Storm Peak Fast at 0xfffffffffe798000 [152] { 0, 0x0, 0x889, 0x00004 }
2. Storm Peak Fast at 0xfffffffffe799000 [153] { 0, 0x0, 0x889, 0x00004 }
...
FAILED: lba_fixup_bus() request for lmmio_space
[fffffffff0000000/fffffffffecffffe]

Output is now:

LBA: Truncating lmmio_space [fffffffff0000000/fffffffffecffffe] to
[fffffffff0000000,fffffffffe797fff]

My only concern with this patch is how C8000 (PAT PDC) will report
elmmio ranges when a gfx card is installed. I'll have to test this
another day.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: James Bottomley <jejb@parisc-linux.org>
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] Add __iomem to __raw_check_addr()

Add __iomem to __raw_check_addr(), which nukes ~13809 sparse
warnings on allmodconfig.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] Add some defines for HugeTLB pages

Define some constants for HugeTLB pages, not that parisc-linux supports
it yet.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] Introduce DINO_LOCAL_IRQS and use it for gsc_find_local_irq

Fix dino by using DINO_LOCAL_IRQS as the limit for gsc_find_local_irq()
instead of the irq itself.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] Fix GSC graphics cards with 64MB regions

Make knapps work with its 64MB gfx card.  I probably just broke another
machine in the process, but assuming 64MB when 64MB aligned is probably
safer than assuming 32MB all the time.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] Fix and cleanup ioremap.c to work with 4level-fixup.h

Fixup ioremap a bit. It seems to work on 32-bit kernels, but fails
miserably on the first ioremapped access on 64-bit kernels. Also, having
STI enabled causes it to fail. Probably because we're passing an ioremapped
region to a real-mode STI call...

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] Add __user annotation to eisa_eeprom.c

Annotate eisa_eeprom_read() with __user.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

[PARISC] Fix Cirrus 6832 Cardbus on RDI Tadpole PARISC Laptop

Fix irq-off-by-one for Cirrus 6832 Cardbus on RDI Tadpole PARISC Laptop.
We just DECLARE_PCI_FIXUP_ENABLE as it is unlikely that this will be
found in any other parisc system.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>