drm/i915: Fix GCMAX color register programming

GC MAX register is used to program values from 1.0 to
less than 3.0. A different register was used instead of
the intended one. Fixed the same.

Currently limiting it to 1.0 due to ABI limitations.

v2: Updated the 1.0 programming and aligned as per GLK, based
on Ville's feedback.

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553869756-4546-2-git-send-email-uma.shankar@intel.com

drm/i915: fix i9xx irq enable/disable

Those functions are used on gen4 as well and gen4 does have a non-RCS
engine, so remove the BUG_ON and flip back the logic to what it was
before the ENGINE_READ/WRITE update

v2: update the posting read as well (Chris, Ville).

Fixes: baba6e572b38 ("drm/i915: take a reference to uncore in the engine and use it")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190329165018.32953-1-daniele.ceraolospurio@intel.com

drm/i915: move the edram detection out of uncore init

edram is not part of uncore and there is no requirement for the
detection to be done before we initialize the uncore functions. The
first check on HAS_EDRAM is in the ggtt_init path, so move it to
i915_driver_init_hw, where other dram-related detection happens.

While at it, save the size in MB instead of the capabilities because the
size is the only thing we look at outside of the init function.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190328174533.31532-1-daniele.ceraolospurio@intel.com

drm/i915: Skip the linear degamma LUT load on ICL+

Don't load the linear degamma LUT on ICL. The hardware no longer
has any silly linkages between the CSC enable and degamma LUT
enable so the degamma LUT is only needed when it's actually
enabled.

Also add comments to explain the situation on GLK.

v2: Drop useless parens around 1<<16
v3: Add missing const

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-11-ville.syrjala@linux.intel.com

drm/i915: Drop the pointless linear legacy LUT load on CHV

We now bypass the legacy LUT when it's not needed, so
no point in filling it up with a linear LUT.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-10-ville.syrjala@linux.intel.com

drm/i915: Extract ilk_color_check()

With everything else moved out of the way only ilk+
remains using _intel_color_check(). Streamline the logic
into ilk_color_check().

v2: Add some comments explaining we that we don't expose
    the full hardware capabilities currently (Matt)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-9-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

drm/i915: Extract bdw_color_check()

Provide a separate .color_check() for BDW+ where we currently
provide the split gamma mode etc.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-8-ville.syrjala@linux.intel.com

drm/i915: Extract glk_color_check()

Unlike the earlier platforms GLK has dedicated degamma and gamma
LUTs. And quite curiously the degamma LUT is actually controlled
via the PLANE_COLOR_CTL CSC enable bit. Hence we must compute
gamma_enable and csc_enable differently to pre-GLK platforms.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-7-ville.syrjala@linux.intel.com

drm/i915: Extract icl_color_check()

ICL is rather easy when it comes to .color_check() as it
finally provides us with a full color pipeline with
individual knobs for each stage.

We'll also start bypassing each LUT individually when
it is not needed.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-6-ville.syrjala@linux.intel.com

drm/i915: Extract chv_color_check()

Since CHV has the CGM unit we require a custom implementation
of .color_check().

This fixes the computation of gamma_enable as previously we
left it enabled even when were using the CGM gamma instead.
Now we turn off the legacy LUT unless it's actually required.

v2: Add some comment explaining the color pipeline (Matt)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-5-ville.syrjala@linux.intel.com

drm/i915: Extract i9xx_color_check()

Apart from CHV the other gmch platforms don't currently
require much work in .color_check(). So let's start by
extracting i9xx_color_check().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-4-ville.syrjala@linux.intel.com

drm/i915: Turn intel_color_check() into a vfunc

The current intel_color_check() is a mess, and worse yet it is
in fact incorrect for several platforms. The hardware has
evolved quite a bit over the years, so let's just go for a clean
split between the platforms by turning this into a vfunc.
The actual work to split it up will follow.

v2: Assign the vfuncs in the order they appear in the
    struct (Matt)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-3-ville.syrjala@linux.intel.com

drm/i915: Extract check_luts()

In prepartion for per-platform color_check() functions extract the
common code into a separate function.

v2: Improve the C8 comment (Matt)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-2-ville.syrjala@linux.intel.com

drm/i915: Update DRIVER_DATE to 20190328

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Update DRIVER_DATE to 20190328

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Update DRIVER_DATE to 20190328

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Reject rotation for some hdr formats

90/270 rotation is not supported for Y21x and the 12/16 bits XVYU formats,
reject support for them.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322135954.20434-3-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Reject Yf tiling for HDR formats, v2.

This was missing in the original addition of those formats, but in
PLANE_SIZE description it's mentioned that 8 cpp formats are not
valid with Yf tiling. Reject this case properly.

Also reject Y21x Yf tiling support this is also not supported.

Changes since v1:
- Reject Y21x as well.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322135954.20434-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Handle YUV subpixel support better

Y41x formats is a 4:4:4 format, so it can be addressed with pixel level accuracy.
Meanwhile it seems that while rotating YUYV 4:2:2 formats need a multiple of 2
for width and height, otherwise corruption occurs.

For YUV 4:2:2, the spec says that w/h should always be even, but we get
away with odd height while unrotated. When rotating it seems corruption
occurs with an odd x/y, and w/h should always be even.
Just to be completely paranoid, reject odd x/y w/h when rotating 90/270.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322135954.20434-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Merge drm/drm-next into drm-intel-next-queued

This is needed to get the fourcc code merged without conflicts.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Drop new chunks of context creation ABI (for now)

The intent was to expose these as part of the means to perform full
context recovery (though not the SINGLE_TIMELINE, that is for later and
just sucked as collateral damage). As that requires a couple more
patches to complete the series, roll back the earlier chunks of ABI for
an intervening PR. We keep all the internals intact and under selftests.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327105814.14694-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Disable semaphore on vGPU for now

This is to disable semaphore usage when on vGPU for now. Unfortunately
GVT-g hasn't fully enabled semaphore usage yet, so current guest with
semaphore use would cause vGPU failure.

Although current semaphore failure with vGPU can be simply resolved by
allowing cmd parser to accept MI_SEMAPHORE_WAIT command with address
audit, we're checking general usage of semaphore and how we should
handle it properly for virtualization in consider of function and
security concern. So we decide to request to disable it for now in
guest driver. Once GVT could support it, we would add new compat bit
to turn it on.

Fixes: e88619646971 ("drm/i915: Use HW semaphores for inter-engine synchronisation on gen8+") #vgpu
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327090636.3547-1-zhenyuw@linux.intel.com

drm/i915: Update TRANS_MSA_MISC for fastsets

Update the DP MSA MISC bits for fastsets. This is needed
when we change between limited and full range RGB output.

On HSW+ changing limited_range does not currently result in a
full modeset since we have don't have the readout code for it
(for DP we could, and probably should, readout from TRANS_MSA_MISC
itself, for HDMI we would have to rely on the infoframe). So
the PIPE_CONF_CHECK() is only performed for pre-HSW platforms.
That means any change in the value will result in a fastset
instead. Fortunately there is no prohibition to changing
TRANS_MSA_MISC dynamically, so it looks like we can legally do
fastsets for this.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-5-ville.syrjala@linux.intel.com

drm/i915: Add max_bpc property for DP MST

Allow the user to limit the output bpc with DP MST.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-4-ville.syrjala@linux.intel.com

drm/i915: Remove the 8bpc shackles from DP MST

Allow DP MST to output any color depth. This means deep color as
well as falling back to 6bpc if we would otherwise require too
much bandwidth.

TODO: We should probably extend bw_contstrained scheme to force
all streams on the link to 6bpc if we can't fit the new stream(s)
otherwise.

v2: Use a proper for-loop (Jani)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-3-ville.syrjala@linux.intel.com

drm/i915: Expose the force_audio property with DP MST

We already expose the force_audio property with SST. Do the same
with MST.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-2-ville.syrjala@linux.intel.com

drm/i915: Add broadcast RGB property for DP MST

Add the "Broadcast RGB" property to MST connectors, and implement
the same logic for it as we have in the SST code.

v2: Extract and reuse intel_dp_limited_color_range()

Cc: Ivan Vlk <ari@adyline.sk>
Tested-by: Ivan Vlk <ari@adyline.sk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108821
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-1-ville.syrjala@linux.intel.com

drm/i915/icl: Fix VEBOX mismatch BUG_ON()

GT VEBOX DISABLE is only 4 bits wide but it was using a 8 bits wide
mask, the remaning reserved bits is set to 0 causing 4 more
nonexistent VEBOX engines being detected as enabled, triggering the
BUG_ON() because of mismatch between vebox_mask and newly added
VEBOX_MASK().

[   64.081621] [drm:intel_device_info_init_mmio [i915]] vdbox enable: 0005, instances: 0005
[   64.081763] [drm:intel_device_info_init_mmio [i915]] vebox enable: 00f1, instances: 0001
[   64.081825] intel_device_info_init_mmio:925 GEM_BUG_ON(vebox_mask != ({ unsigned int first__ = (VECS0); unsigned int count__ = (2); ((&(dev_priv)->__info)->engine_mask & (((~0UL) - (1UL << (first__)) + 1) & (~0UL >> (64 - 1 - (first__ + count__ - 1))))) >> first__; }))
[   64.082047] ------------[ cut here ]------------
[   64.082054] kernel BUG at drivers/gpu/drm/i915/intel_device_info.c:925!

BSpec: 20680
Fixes: 9511cb6481af ("drm/i915: Adding missing '; ' to ENGINE_INSTANCES")
Fixes: 26376a7e74d2 ("drm/i915/icl: Check for fused-off VDBOX and VEBOX instances")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326230223.26336-1-jose.souza@intel.com

drm/i915: fix i386 build of 64b raw_uncore functions

When building with ARCH=i386, readq and writeq are not defined,
resulting in:

intel_uncore.h: In function ‘__raw_uncore_read64’:
intel_uncore.h:257:9: error: implicit declaration of function ‘readq’;
did you mean ‘readl’? [-Werror=implicit-function-declaration]
  return read##s__(uncore->regs + i915_mmio_reg_offset(reg)); \
         ^

and:

intel_uncore.h: In function ‘__raw_uncore_write64’:
intel_uncore.h:264:2: error: implicit declaration of function ‘writeq’;
did you mean ‘writel’? [-Werror=implicit-function-declaration]
  write##s__(val, uncore->regs + i915_mmio_reg_offset(reg)); \
  ^

Add the io-64-nonatomic-lo-hi include to have readq and writeq available
for all builds. This header internally includes linux/io.h, so the
native readq and writeq definitions will be used when available.

Fixes: 6cc5ca768825 ("drm/i915: rename raw reg access functions")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326233817.5417-1-daniele.ceraolospurio@intel.com

drm/i915: Adding missing '; ' to ENGINE_INSTANCES

Tvrtko spotted that I left off the trailing ';'. It went unnoticed by CI
because despite adding the macro, we didn't add a user, so include one as
well (a simple debug print).

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 97ee6e925552 ("drm/i915: stop storing the media fuse")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326180007.11722-1-chris@chris-wilson.co.uk

drm/i915: Update size upon return from GEM_CREATE

Since GEM_CREATE is trying to outsmart the user by rounding up unaligned
objects, we used to update the size returned to userspace.
This update seems to have been lost throughout the history.

v2: Use round_up(), reorder locals (Chris)

References: ff72145badb8 ("drm: dumb scanout create/mmap for intel/radeon (v3)")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Janusz Krzysztofik <janusz.krzysztofik@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326170218.13255-1-michal.winiarski@intel.com

drm/i915: take a reference to uncore in the engine and use it

A few advantages:

- Prepares us for the planned split of display uncore from GT uncore

- Improves our engine-centric view of the world in the engine code
  and allows us to avoid jumping back to dev_priv.

- Allows us to wrap accesses to engine register in nice macros that
  automatically pick the right mmio base.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-10-daniele.ceraolospurio@intel.com

drm/i915: switch intel_wait_for_register to uncore

The intel_uncore structure is the owner of register access, so
subclass the function to it.

While at it, use a local uncore var and switch to the new read/write
functions where it makes sense.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-9-daniele.ceraolospurio@intel.com

drm/i915: intel_wait_for_register_fw to uncore

The intel_uncore structure is the owner of register access, so
subclass the function to it.

While at it, use a local uncore var and switch to the new read/write
functions where it makes sense.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-8-daniele.ceraolospurio@intel.com

drm/i915: switch intel_uncore_forcewake_for_reg to intel_uncore

The intel_uncore structure is the owner of FW, so subclass the
function to it.

While at it, use a local uncore var and switch to the new read/write
functions where it makes sense.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-7-daniele.ceraolospurio@intel.com

drm/i915: switch uncore mmio funcs to use intel_uncore

The full read/write ops can now work on the intel_uncore struct.
Introduce intel_uncore_read/write functions working on intel_uncore
and switch the I915_READ/WRITE macro to internally call those.

v2: no change
v3: add intel_uncore_read/write functions (Chris), update commit msg

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-6-daniele.ceraolospurio@intel.com

drm/i915: take a ref to the rpm in the uncore structure

Remove a bit of pointer dancing in the reg access path.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-5-daniele.ceraolospurio@intel.com

drm/i915: add uncore flags for unclaimed mmio

Save the HW capabilities to avoid having to jump back to dev_priv
every time.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-4-daniele.ceraolospurio@intel.com

drm/i915: add HAS_FORCEWAKE flag to uncore

We have several cases where we don't have forcewake (older gens, GVT and
planned display-only uncore), so, instead of checking every time against
the various condition, save the info in a flag and use that.

Note that this patch also change the behavior for gen5 with vpgu
enabled, but this is not an issue since we don't support vgpu on gen5.

v2: split out from previous path, fix check for missing case (Paulo)
v3: Inline helper for clarity in testing flags

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-3-daniele.ceraolospurio@intel.com

drm/i915: rename raw reg access functions

They now work on uncore, so use raw_uncore_ prefix. Also move them to
uncore.h

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-2-daniele.ceraolospurio@intel.com

drm/i915/icl: reduce pll_id scope and use enum type

Now that pll_id is not used anymore for combophy, reduce its scope.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322223751.22089-6-lucas.demarchi@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/icl: use previous pll hw readout

By the time icl_ddi_clock_get() is called we've just got the hw state
from the pll registers. We don't need to read them again: we can rather
reuse what was cached in the dpll_hw_state.

While at it, s/refclk/ref_clock/ just to be consistent with the name
used in code nearby.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322223751.22089-5-lucas.demarchi@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/cnl: use previous pll hw readout

By the time cnl_ddi_clock_get() is called we've just got the hw state
from the pll registers. We don't need to read them again: we can rather
reuse what was cached in the dpll_hw_state.

This also affects the code for ICL since it partially reuses the CNL
code. However the more intricate part on ICL is left for another patch.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322223751.22089-4-lucas.demarchi@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/bxt: make bxt_calc_pll_link() similar to skl

Rename state to pll_state and use it as the argument to
bxt_calc_pll_link(), similar to how it's done in the skl variant.

The WARN_ON(!crtc_state->shared_dpll) is not very useful, so remove it
as well.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322223751.22089-3-lucas.demarchi@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/skl: use previous pll hw readout

By the time skl_ddi_clock_get() is called - and thus
skl_calc_wrpll_link() - we've just got the hw state from the pll
registers. We don't need to read them again: we can rather reuse what
was cached in the dpll_hw_state.

v2: rename state variable to pll_state, make argument const in
    skl_calc_wrpll_link() and remove not useful warning (from Ville)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322223751.22089-2-lucas.demarchi@intel.com

drm/i915/selftests: Fix an IS_ERR() vs NULL check

The live_context() function returns error pointers.  It never returns
NULL.

Fixes: 9c1477e83e62 ("drm/i915/selftests: Exercise adding requests to a full GGTT")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326050843.GA20038@kadam

drm/i915: stop storing the media fuse

We're already updating the engine_mask to reflect what's in the HW, so
we can just get the info from there. A couple of macros have been added
to facilitate this.

v2: Appease checkpatch

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322002431.9585-1-daniele.ceraolospurio@intel.com

drm/i915/bios: iterate over child devices to initialize ddi_port_info

Iterate over child devices instead of ports in parse_ddi_ports() to
initialize ddi_port_info. We'll eventually need to decide some stuff
based on the child device order, which may be different from the port
order.

As a bonus, this allows better abstractions for e.g. dvo port mapping.

There's a subtle change in the DDC pin and AUX channel sanitization as
we change the order. Otherwise, this should not change behaviour.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322121008.4456-1-jani.nikula@intel.com

Merge tag 'drm-misc-next-2019-03-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.2:

UAPI Changes:
- Add Colorspace connector property (Uma)
- fourcc: Several new YUV formats from ARM (Brian & Ayan)
- fourcc: Fix merge conflicts between new formats above and Swati's that
  went in via topic/hdr-formats-2019-03-07 branch (Maarten)

Cross-subsystem Changes:
- Typed component support via topic/component-typed-2019-02-11 (Maxime/Daniel)

Core Changes:
- Improve component helper documentation (Daniel)
- Avoid calling drm_dev_unregister() twice on unplugged devices (Noralf)
- Add device managed (devm) drm_device init function (Noralf)
- Graduate TINYDRM_MODE to DRM_SIMPLE_MODE in core (Noralf)
- Move MIPI/DSI rate control params computation into core from i915 (David)
- Add support for shmem backed gem objects (Noralf)

Driver Changes:
- various: Use of_node_name_eq for node name comparisons (Rob Herring)
- sun4i: Add DSI burst mode support (Konstantin)
- panel: Add Ronbo RB070D30 MIPI/DSI panel support (Konstantin)
- virtio: A few prime improvements (Gerd)
- tinydrm: Remove tinydrm_device (Noralf)
- vc4: Add load tracker to driver to detect underflow in atomic check (Boris)
- vboxvideo: Move it out of staging \o/ (Hans)
- v3d: Add support for V3D v4.2 (Eric)

Cc: Konstantin Sudakov <k.sudakov@integrasources.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Francis <David.Francis@amd.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Ayan Kumar Halder <ayan.halder@arm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321170805.GA50145@art_vandelay

drm/i915: Report the correct errno from i915_gem_context_open()

Fixup the errno as we adjusted the error path to receive the errno and
not compute it itself from ERR_PTR(ctx) anymore.

drivers/gpu/drm/i915/i915_gem_context.c:793 i915_gem_context_open() warn: passing a valid pointer to 'PTR_ERR'

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 3aa9945a528e ("drm/i915: Separate GEM context construction and registration to userspace")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325090413.19906-2-chris@chris-wilson.co.uk

drm/i915: Use vblank_disable_immediate on gen2

The vblank timestamp->counter guesstimator seems to be
working sufficiently well, so there's no reason not to
disable vblank interrupts ASAP even on gen2.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322180804.3300-2-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Disable C3 when enabling vblank interrupts on i945gm

The AGPBUSY thing doesn't work on i945gm anymore. This means
the gmch is incapable of waking the CPU from C3 when an interrupt
is generated. The interrupts just get postponed indefinitely until
something wakes up the CPU. This is rather annoying for vblank
interrupts as we are unable to maintain a steady framerate
unless the machine is sufficiently loaded to stay out of C3.

To combat this let's use pm_qos to prevent C3 whenever vblank
interrupts are enabled. To maintain reasonable amount of powersaving
we will attempt to limit this to C3 only while leaving C1 and C2
enabled.

v2: Use READ_ONCE() (Chris)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30364
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322180804.3300-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Mark AML 0x87CA as ULX

If I'm reading the spec right AML 0x87CA is a Y SKU, so it
should be marked as ULX in our old style terminology.

Cc: stable@vger.kernel.org
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: c0c46ca461f1 ("drm/i915/aml: Add new Amber Lake PCI ID")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322204944.23613-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

Merge tag 'du-next-20190318' of git://linuxtv.org/pinchartl/media into drm-next

Renesas display drivers changes for v5.2:

- Display writeback (includes VSP changes and DRM/KMS API changes)
(All v4l patches acked by Mauro)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318153613.GE12707@pendragon.ideasonboard.com

Merge tag 'omapdrm-5.2' of git://git./linux/kernel/git/tomba/linux into drm-next

omapdrm changes for 5.2

- Implement drm_bridge and drm_panel support for omapdrm
- Drop omapdrm's panel-dpi, tfp410 and connector-dvi drivers
- New DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags
- Improvements to tfp410 driver
- OSD070T1718-19TS panel support to simple-panel
- panel-tpo-td028ttec1 backlight support

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/670dc1ce-feaf-b88e-780f-b99251b88a82@ti.com

drm/i915: Remove defunct intel_suspend_gt_powersave()

Since commit b7137e0cf1e5 ("drm/i915: Defer enabling rc6 til after we
submit the first batch/context"), intel_suspend_gt_powersave() has been
a no-op. As we still do not need to do anything explicitly on suspend
(we do everything required on idling), remove the defunct function.

References: b7137e0cf1e5 ("drm/i915: Defer enabling rc6 til after we submit the first batch/context")
Suggested-by: "Hiatt, Don" <don.hiatt@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190323214009.23294-1-chris@chris-wilson.co.uk

Linux 5.1-rc2

Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous ext4 bug fixes for 5.1"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: prohibit fstrim in norecovery mode
  ext4: cleanup bh release code in ext4_ind_remove_space()
  ext4: brelse all indirect buffer in ext4_ind_remove_space()
  ext4: report real fs size after failed resize
  ext4: add missing brelse() in add_new_gdb_meta_bg()
  ext4: remove useless ext4_pin_inode()
  ext4: avoid panic during forced reboot
  ext4: fix data corruption caused by unaligned direct AIO
  ext4: fix NULL pointer dereference while journal is aborted

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler updates from Thomas Gleixner:
 "Third more careful attempt for this set of fixes:

   - Prevent a 32bit math overflow in the cpufreq code

   - Fix a buffer overflow when scanning the cgroup2 cpu.max property

   - A set of fixes for the NOHZ scheduler logic to prevent waking up
     CPUs even if the capacity of the busy CPUs is sufficient along with
     other tweaks optimizing the behaviour for asymmetric systems
     (big/little)"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Skip LLC NOHZ logic for asymmetric systems
  sched/fair: Tune down misfit NOHZ kicks
  sched/fair: Comment some nohz_balancer_kick() kick conditions
  sched/core: Fix buffer overflow in cgroup2 property cpu.max
  sched/cpufreq: Fix 32-bit math overflow

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf updates from Thomas Gleixner:
 "A larger set of perf updates.

  Not all of them are strictly fixes, but that's solely the tip
  maintainers fault as they let the timely -rc1 pull request fall
  through the cracks for various reasons including travel. So I'm
  sending this nevertheless because rebasing and distangling fixes and
  updates would be a mess and risky as well. As of tomorrow, a strict
  fixes separation is happening again. Sorry for the slip-up.

  Kernel:

   - Handle RECORD_MMAP vs. RECORD_MMAP2 correctly so different
     consumers of the mmap event get what they requested.

  Tools:

   - A larger set of updates to perf record/report/scripts vs. time
     stamp handling

   - More Python3 fixups

   - A pile of memory leak plumbing

   - perf BPF improvements and fixes

   - Finalize the perf.data directory storage"

[ Note: the kernel part is strictly a fix, the updates are purely to
  tooling       - Linus ]

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
  perf bpf: Show more BPF program info in print_bpf_prog_info()
  perf bpf: Extract logic to create program names from perf_event__synthesize_one_bpf_prog()
  perf tools: Save bpf_prog_info and BTF of new BPF programs
  perf evlist: Introduce side band thread
  perf annotate: Enable annotation of BPF programs
  perf build: Check what binutils's 'disassembler()' signature to use
  perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotation
  perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO
  perf feature detection: Add -lopcodes to feature-libbfd
  perf top: Add option --no-bpf-event
  perf bpf: Save BTF information as headers to perf.data
  perf bpf: Save BTF in a rbtree in perf_env
  perf bpf: Save bpf_prog_info information as headers to perf.data
  perf bpf: Save bpf_prog_info in a rbtree in perf_env
  perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead of perf_tool
  perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear()
  bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()
  tools lib bpf: Introduce bpf_program__get_prog_info_linear()
  perf record: Replace option --bpf-event with --no-bpf-event
  perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()
  ...

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes:

   - Prevent potential NULL pointer dereferences in the HPET and HyperV
     code

   - Exclude the GART aperture from /proc/kcore to prevent kernel
     crashes on access

   - Use the correct macros for Cyrix I/O on Geode processors

   - Remove yet another kernel address printk leak

   - Announce microcode reload completion as requested by quite some
     people. Microcode loading has become popular recently.

   - Some 'Make Clang' happy fixlets

   - A few cleanups for recently added code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/gart: Exclude GART aperture from kcore
  x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
  x86/mm/pti: Make local symbols static
  x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors
  x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
  x86/microcode: Announce reload operation's completion
  x86/hyperv: Prevent potential NULL pointer dereference
  x86/hpet: Prevent potential NULL pointer dereference
  x86/lib: Fix indentation issue, remove extra tab
  x86/boot: Restrict header scope to make Clang happy
  x86/mm: Don't leak kernel addresses
  x86/cpufeature: Fix various quality problems in the <asm/cpu_device_hd.h> header

Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
 "A set of small fixes plus the removal of stale board support code:

   - Remove the board support code from the clpx711x clocksource driver.
     This change had fallen through the cracks and I'm sending it now
     rather than dealing with people who want to improve that stale code
     for 3 month.

   - Use the proper clocksource mask on RICSV

   - Make local scope functions and variables static"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/clps711x: Remove board support
  clocksource/drivers/riscv: Fix clocksource mask
  clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction static
  clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static
  clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static
  clocksource/drivers/clps711x: Make clps711x_clksrc_init() static
  time/jiffies: Make refined_jiffies static

Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
 "Two small fixes:

   - Cure a recently introduces error path hickup which tries to
     unregister a not registered lockdep key in te workqueue code

   - Prevent unaligned cmpxchg() crashes in the robust list handling
     code by sanity checking the user space supplied futex pointer"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Ensure that futex address is aligned in handle_futex_death()
  workqueue: Only unregister a registered lockdep key

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for the interrupt subsystem:

   - Remove secondary GIC support on systems w/o device-tree support

   - A set of small fixlets in various irqchip drivers

   - static and fall-through annotations

   - Kernel doc and typo fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Mark expected switch case fall-through
  genirq/devres: Remove excess parameter from kernel doc
  irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static
  irqchip/mbigen: Don't clear eventid when freeing an MSI
  irqchip/stm32: Don't set rising configuration registers at init
  irqchip/stm32: Don't clear rising/falling config registers at init
  dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support
  irqchip/mmp: Make mmp_irq_domain_ops static
  irqchip/brcmstb-l2: Make two init functions static
  genirq: Fix typo in comment of IRQD_MOVE_PCNTXT
  irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp
  irqchip/gic: Drop support for secondary GIC in non-DT systems
  irqchip/imx-irqsteer: Fix of_property_read_u32() error handling

Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull core fixes from Thomas Gleixner:
 "Two small fixes:

   - Move the large objtool_file struct off the stack so objtool works
     in setups with a tight stack limit.

   - Make a few variables static in the watchdog core code"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  watchdog/core: Make variables static
  objtool: Move objtool_file struct off the stack

Merge branch 'next' of git://git./linux/kernel/git/rzhang/linux

Pull thermal management fixes from Zhang Rui:

 - Fix a wrong __percpu structure declaration in intel_powerclamp driver
   (Luc Van Oostenryck)

 - Fix truncated name of the idle injection kthreads created by
   intel_powerclamp driver (Zhang Rui)

 - Fix the missing UUID supports in int3400 thermal driver (Matthew
   Garrett)

 - Fix a crash when accessing the debugfs of bcm2835 SoC thermal driver
   (Phil Elwell)

 - A couple of trivial fixes/cleanups in some SoC thermal drivers

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal/intel_powerclamp: fix truncated kthread name
  thermal: mtk: Allocate enough space for mtk_thermal.
  thermal/int340x_thermal: fix mode setting
  thermal/int340x_thermal: Add additional UUIDs
  thermal: cpu_cooling: Remove unused cur_freq variable
  thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs
  thermal: samsung: Fix incorrect check after code merge
  thermal/intel_powerclamp: fix __percpu declaration of worker_data

Merge tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb3 fixes from Steve French:

 - two fixes for stable for guest mount problems with smb3.1.1

 - two fixes for crediting (SMB3 flow control) on resent requests

 - a byte range lock leak fix

 - two fixes for incorrect rc mappings

* tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  SMB3: Fix SMB3.1.1 guest mounts to Samba
  cifs: Fix slab-out-of-bounds when tracing SMB tcon
  cifs: allow guest mounts to work for smb3.11
  fix incorrect error code mapping for OBJECTID_NOT_FOUND
  cifs: fix that return -EINVAL when do dedupe operation
  CIFS: Fix an issue with re-sending rdata when transport returning -EAGAIN
  CIFS: Fix an issue with re-sending wdata when transport returning -EAGAIN

Merge tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux

Pull auxdisplay updates from Miguel Ojeda:
 "A few fixes and improvements for auxdisplay:

   - Series to fix a memory leak in hd44780 while introducing
     charlcd_free(). From Andy Shevchenko

   - Series to clean up the Kconfig menus and a couple of improvements
     for charlcd. From Mans Rullgard"

* tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux:
  auxdisplay: charlcd: make backlight initial state configurable
  auxdisplay: charlcd: simplify init message display
  auxdisplay: deconfuse configuration
  auxdisplay: hd44780: Convert to use charlcd_free()
  auxdisplay: panel: Convert to use charlcd_free()
  auxdisplay: charlcd: Introduce charlcd_free() helper
  auxdisplay: charlcd: Move to_priv() to charlcd namespace
  auxdisplay: hd44780: Fix memory leak on ->remove()

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Six fixes to four drivers and two core fixes.

  One core fix simply corrects a missed destroy_rcu_head() but the other
  is hopefully the end of an ongoing effort to make suspend/resume play
  nicely with scsi quiesce"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ibmvscsi: Fix empty event pool access during host removal
  scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton
  scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()
  scsi: qla2xxx: Fix NULL pointer crash due to stale CPUID
  scsi: qla2xxx: Fix FC-AL connection target discovery
  scsi: core: Avoid that a kernel warning appears during system resume
  scsi: core: Also call destroy_rcu_head() for passthrough requests
  scsi: iscsi: flush running unbind operations when removing a session

drm/i915/guc: Support for extended GuC notification messages

GuC may send notification messages with payload larger than
single u32. Prepare driver to accept longer messages.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321120004.53012-1-michal.wajdeczko@intel.com

drm/i915: always pin hw_id for GVT context

Initially found issue with closed context debug check when pin
hw_id for GVT context, looks we should always pin hw_id for that
as GVT context is fixed for each vGPU life cycle, and we'd also
like to get pinned hw_id e.g for perf reason, etc.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190311023747.1426-1-zhenyuw@linux.intel.com

clocksource/drivers/clps711x: Remove board support

Since board support for the CLPS711X platform was removed,
remove the board support from the clps711x-timer driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20181220111626.17140-1-shc_work@mail.ru

Merge tag 'io_uring-20190323' of git://git.kernel.dk/linux-block

Pull io_uring fixes and improvements from Jens Axboe:
 "The first five in this series are heavily inspired by the work Al did
  on the aio side to fix the races there.

  The last two re-introduce a feature that was in io_uring before it got
  merged, but which I pulled since we didn't have a good way to have
  BVEC iters that already have a stable reference. These aren't
  necessarily related to block, it's just how io_uring pins fixed
  buffers"

* tag 'io_uring-20190323' of git://git.kernel.dk/linux-block:
  block: add BIO_NO_PAGE_REF flag
  iov_iter: add ITER_BVEC_FLAG_NO_REF flag
  io_uring: mark me as the maintainer
  io_uring: retry bulk slab allocs as single allocs
  io_uring: fix poll races
  io_uring: fix fget/fput handling
  io_uring: add prepped flag
  io_uring: make io_read/write return an integer
  io_uring: use regular request ref counts

Merge tag 'for-linus-20190323' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A set of fixes/changes that should go into this series. This contains:

   - Kernel doc / comment updates (Bart, Shenghui)

   - Un-export of core-only used function (Bart)

   - Fix race on loop file access (Dongli)

   - pf/pcd queue cleanup fixes (me)

   - Use appropriate helper for RESTART bit set (Yufen)

   - Use named identifier for classic poll (Yufen)"

* tag 'for-linus-20190323' of git://git.kernel.dk/linux-block:
  sbitmap: trivial - update comment for sbitmap_deferred_clear_bit
  blkcg: Fix kernel-doc warnings
  blk-iolatency: #include "blk.h"
  block: Unexport blk_mq_add_to_requeue_list()
  block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected value
  blk-mq: remove unused 'nr_expired' from blk_mq_hw_ctx
  loop: access lo_backing_file only when the loop device is Lo_bound
  blk-mq: use blk_mq_sched_mark_restart_hctx to set RESTART
  paride/pcd: cleanup queues when detection fails
  paride/pf: cleanup queues when detection fails

Merge tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
 "A follow up for the new alloc_size logic and a blacklisting fix,
  marked for stable"

* tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client:
  rbd: drop wait_for_latest_osdmap()
  libceph: wait for latest osdmap in ceph_monc_blacklist_add()
  rbd: set io_min, io_opt and discard_granularity to alloc_size

ext4: prohibit fstrim in norecovery mode

The ext4 fstrim implementation uses the block bitmaps to find free space
that can be discarded.  If we haven't replayed the journal, the bitmaps
will be stale and we absolutely *cannot* use stale metadata to zap the
underlying storage.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: cleanup bh release code in ext4_ind_remove_space()

Currently, we are releasing the indirect buffer where we are done with
it in ext4_ind_remove_space(), so we can see the brelse() and
BUFFER_TRACE() everywhere.  It seems fragile and hard to read, and we
may probably forget to release the buffer some day.  This patch cleans
up the code by putting of the code which releases the buffers to the
end of the function.

Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>

ext4: brelse all indirect buffer in ext4_ind_remove_space()

All indirect buffers get by ext4_find_shared() should be released no
mater the branch should be freed or not. But now, we forget to release
the lower depth indirect buffers when removing space from the same
higher depth indirect block. It will lead to buffer leak and futher
more, it may lead to quota information corruption when using old quota,
consider the following case.

 - Create and mount an empty ext4 filesystem without extent and quota
   features,
 - quotacheck and enable the user & group quota,
 - Create some files and write some data to them, and then punch hole
   to some files of them, it may trigger the buffer leak problem
   mentioned above.
 - Disable quota and run quotacheck again, it will create two new
   aquota files and write the checked quota information to them, which
   probably may reuse the freed indirect block(the buffer and page
   cache was not freed) as data block.
 - Enable quota again, it will invoke
   vfs_load_quota_inode()->invalidate_bdev() to try to clean unused
   buffers and pagecache. Unfortunately, because of the buffer of quota
   data block is still referenced, quota code cannot read the up to date
   quota info from the device and lead to quota information corruption.

This problem can be reproduced by xfstests generic/231 on ext3 file
system or ext4 file system without extent and quota features.

This patch fix this problem by releasing the missing indirect buffers,
in ext4_ind_remove_space().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org

genirq: Mark expected switch case fall-through

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

With -Wimplicit-fallthrough added to CFLAGS:

 kernel/irq/manage.c: In function ‘irq_do_set_affinity’:
 kernel/irq/manage.c:198:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   cpumask_copy(desc->irq_common_data.affinity, mask);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 kernel/irq/manage.c:199:2: note: here
   case IRQ_SET_MASK_OK_NOCOPY:
   ^~~~

Annotate it.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20190228213714.GA9246@embeddedor

clocksource/drivers/riscv: Fix clocksource mask

For all riscv architectures (RV32, RV64 and RV128), the clocksource
is a 64 bit incrementing counter.

Fix the clock source mask accordingly.

Tested on both 64bit and 32 bit virt machine in QEMU.

Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver")
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Anup Patel <Anup.Patel@wdc.com>
Cc: Damien Le Moal <Damien.LeMoal@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190322215411.19362-1-atish.patra@wdc.com

x86/gart: Exclude GART aperture from kcore

On machines where the GART aperture is mapped over physical RAM,
/proc/kcore contains the GART aperture range. Accessing the GART range via
/proc/kcore results in a kernel crash.

vmcore used to have the same issue, until it was fixed with commit
2a3e83c6f96c ("x86/gart: Exclude GART aperture from vmcore")', leveraging
existing hook infrastructure in vmcore to let /proc/vmcore return zeroes
when attempting to read the aperture region, and so it won't read from the
actual memory.

Apply the same workaround for kcore. First implement the same hook
infrastructure for kcore, then reuse the hook functions introduced in the
previous vmcore fix. Just with some minor adjustment, rename some functions
for more general usage, and simplify the hook infrastructure a bit as there
is no module usage yet.

Suggested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiri Bohac <jbohac@suse.cz>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Dave Young <dyoung@redhat.com>
Link: https://lkml.kernel.org/r/20190308030508.13548-1-kasong@redhat.com

cifs: update internal module version number

To 2.19

Signed-off-by: Steve French <stfrench@microsoft.com>

SMB3: Fix SMB3.1.1 guest mounts to Samba

Workaround problem with Samba responses to SMB3.1.1
null user (guest) mounts.  The server doesn't set the
expected flag in the session setup response so we have
to do a similar check to what is done in smb3_validate_negotiate
where we also check if the user is a null user (but not sec=krb5
since username might not be passed in on mount for Kerberos case).

Note that the commit below tightened the conditions and forced signing
for the SMB2-TreeConnect commands as per MS-SMB2.
However, this should only apply to normal user sessions and not for
cases where there is no user (even if server forgets to set the flag
in the response) since we don't have anything useful to sign with.
This is especially important now that the more secure SMB3.1.1 protocol
is in the default dialect list.

An earlier patch ("cifs: allow guest mounts to work for smb3.11") fixed
the guest mounts to Windows.

Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: Fix slab-out-of-bounds when tracing SMB tcon

This patch fixes the following KASAN report:

[  779.044746] BUG: KASAN: slab-out-of-bounds in string+0xab/0x180
[  779.044750] Read of size 1 at addr ffff88814f327968 by task trace-cmd/2812

[  779.044756] CPU: 1 PID: 2812 Comm: trace-cmd Not tainted 5.1.0-rc1+ #62
[  779.044760] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014
[  779.044761] Call Trace:
[  779.044769]  dump_stack+0x5b/0x90
[  779.044775]  ? string+0xab/0x180
[  779.044781]  print_address_description+0x6c/0x23c
[  779.044787]  ? string+0xab/0x180
[  779.044792]  ? string+0xab/0x180
[  779.044797]  kasan_report.cold.3+0x1a/0x32
[  779.044803]  ? string+0xab/0x180
[  779.044809]  string+0xab/0x180
[  779.044816]  ? widen_string+0x160/0x160
[  779.044822]  ? vsnprintf+0x5bf/0x7f0
[  779.044829]  vsnprintf+0x4e7/0x7f0
[  779.044836]  ? pointer+0x4a0/0x4a0
[  779.044841]  ? seq_buf_vprintf+0x79/0xc0
[  779.044848]  seq_buf_vprintf+0x62/0xc0
[  779.044855]  trace_seq_printf+0x113/0x210
[  779.044861]  ? trace_seq_puts+0x110/0x110
[  779.044867]  ? trace_raw_output_prep+0xd8/0x110
[  779.044876]  trace_raw_output_smb3_tcon_class+0x9f/0xc0
[  779.044882]  print_trace_line+0x377/0x890
[  779.044888]  ? tracing_buffers_read+0x300/0x300
[  779.044893]  ? ring_buffer_read+0x58/0x70
[  779.044899]  s_show+0x6e/0x140
[  779.044906]  seq_read+0x505/0x6a0
[  779.044913]  vfs_read+0xaf/0x1b0
[  779.044919]  ksys_read+0xa1/0x130
[  779.044925]  ? kernel_write+0xa0/0xa0
[  779.044931]  ? __do_page_fault+0x3d5/0x620
[  779.044938]  do_syscall_64+0x63/0x150
[  779.044944]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  779.044949] RIP: 0033:0x7f62c2c2db31
[ 779.044955] Code: fe ff ff 48 8d 3d 17 9e 09 00 48 83 ec 08 e8 96 02
02 00 66 0f 1f 44 00 00 8b 05 fa fc 2c 00 48 63 ff 85 c0 75 13 31 c0
0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48
89
[  779.044958] RSP: 002b:00007ffd6e116678 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  779.044964] RAX: ffffffffffffffda RBX: 0000560a38be9260 RCX: 00007f62c2c2db31
[  779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003
[  779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003
[  779.044969] RBP: 00007f62c2ef5420 R08: 0000000000000000 R09: 0000000000000003
[  779.044972] R10: ffffffffffffffa8 R11: 0000000000000246 R12: 00007ffd6e116710
[  779.044975] R13: 0000000000002000 R14: 0000000000000d68 R15: 0000000000002000

[  779.044981] Allocated by task 1257:
[  779.044987]  __kasan_kmalloc.constprop.5+0xc1/0xd0
[  779.044992]  kmem_cache_alloc+0xad/0x1a0
[  779.044997]  getname_flags+0x6c/0x2a0
[  779.045003]  user_path_at_empty+0x1d/0x40
[  779.045008]  do_faccessat+0x12a/0x330
[  779.045012]  do_syscall_64+0x63/0x150
[  779.045017]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[  779.045019] Freed by task 1257:
[  779.045023]  __kasan_slab_free+0x12e/0x180
[  779.045029]  kmem_cache_free+0x85/0x1b0
[  779.045034]  filename_lookup.part.70+0x176/0x250
[  779.045039]  do_faccessat+0x12a/0x330
[  779.045043]  do_syscall_64+0x63/0x150
[  779.045048]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[  779.045052] The buggy address belongs to the object at ffff88814f326600
which belongs to the cache names_cache of size 4096
[  779.045057] The buggy address is located 872 bytes to the right of
4096-byte region [ffff88814f326600, ffff88814f327600)
[  779.045058] The buggy address belongs to the page:
[  779.045062] page:ffffea00053cc800 count:1 mapcount:0 mapping:ffff88815b191b40 index:0x0 compound_mapcount: 0
[  779.045067] flags: 0x200000000010200(slab|head)
[  779.045075] raw: 0200000000010200 dead000000000100 dead000000000200 ffff88815b191b40
[  779.045081] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[  779.045083] page dumped because: kasan: bad access detected

[  779.045085] Memory state around the buggy address:
[  779.045089]  ffff88814f327800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045093]  ffff88814f327880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045097] >ffff88814f327900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045099]                                                           ^
[  779.045103]  ffff88814f327980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045107]  ffff88814f327a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045109] ==================================================================
[  779.045110] Disabling lock debugging due to kernel taint

Correctly assign tree name str for smb3_tcon event.

Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: allow guest mounts to work for smb3.11

Fix Guest/Anonymous sessions so that they work with SMB 3.11.

The commit noted below tightened the conditions and forced signing for
the SMB2-TreeConnect commands as per MS-SMB2.
However, this should only apply to normal user sessions and not for
Guest/Anonumous sessions.

Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

fix incorrect error code mapping for OBJECTID_NOT_FOUND

It was mapped to EIO which can be confusing when user space
queries for an object GUID for an object for which the server
file system doesn't support (or hasn't saved one).

As Amir Goldstein suggested this is similar to ENOATTR
(equivalently ENODATA in Linux errno definitions) so
changing NT STATUS code mapping for OBJECTID_NOT_FOUND
to ENODATA.

Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Amir Goldstein <amir73il@gmail.com>

cifs: fix that return -EINVAL when do dedupe operation

dedupe_file_range operations is combiled into remap_file_range.
But it's always skipped for dedupe operations in function
cifs_remap_file_range.

Example to test:
Before this patch:
  # dd if=/dev/zero of=cifs/file bs=1M count=1
  # xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file
  XFS_IOC_FILE_EXTENT_SAME: Invalid argument

After this patch:
  # dd if=/dev/zero of=cifs/file bs=1M count=1
  # xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file
  XFS_IOC_FILE_EXTENT_SAME: Operation not supported

Influence for xfstests:
generic/091
generic/112
generic/127
generic/263
These tests report this error "do_copy_range:: Invalid
argument" instead of "FIDEDUPERANGE: Invalid argument".
Because there are still two bugs cause these test failed.
https://bugzilla.kernel.org/show_bug.cgi?id=202935
https://bugzilla.kernel.org/show_bug.cgi?id=202785

Signed-off-by: Xiaoli Feng <fengxiaoli0714@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

CIFS: Fix an issue with re-sending rdata when transport returning -EAGAIN

When sending a rdata, transport may return -EAGAIN. In this case
we should re-obtain credits because the session may have been
reconnected.

Change in v2: adjust_credits before re-sending

Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

CIFS: Fix an issue with re-sending wdata when transport returning -EAGAIN

When sending a wdata, transport may return -EAGAIN. In this case
we should re-obtain credits because the session may have been
reconnected.

Change in v2: adjust_credits before re-sending

Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction static

Fix sparse warning:

drivers/clocksource/mips-gic-timer.c:70:18: warning:
 symbol 'gic_compare_irqaction' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20190322144359.19516-1-yuehaibing@huawei.com

clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static

Fix sparse warning:

drivers/clocksource/timer-ti-dm.c:589:5: warning:
 symbol 'omap_dm_timer_set_load_start' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20190322144302.6704-1-yuehaibing@huawei.com

clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static

Fix sparse warnings:

drivers/clocksource/tcb_clksrc.c:74:6: warning:
 symbol 'tc_clksrc_suspend' was not declared. Should it be static?
drivers/clocksource/tcb_clksrc.c:89:6: warning:
 symbol 'tc_clksrc_resume' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <nicolas.ferre@microchip.com>
Cc: <daniel.lezcano@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Link: https://lkml.kernel.org/r/20190322143940.12396-1-yuehaibing@huawei.com

clocksource/drivers/clps711x: Make clps711x_clksrc_init() static

Fix sparse warning:

drivers/clocksource/clps711x-timer.c:96:13: warning:
 symbol 'clps711x_clksrc_init' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <daniel.lezcano@linaro.org>
Cc: <shc_work@mail.ru>
Cc: <linux-arm-kernel@lists.infradead.org>
Link: https://lkml.kernel.org/r/20190322143708.12716-1-yuehaibing@huawei.com

Merge tag 'perf-core-for-mingo-5.1-20190321' of git://git./linux/kernel/git/acme/linux into perf/urgent

Pull perf/core improvements and fixes from Arnaldo:

BPF:

  Song Liu:

  - Add support for annotating BPF programs, using the PERF_RECORD_BPF_EVENT
    and PERF_RECORD_KSYMBOL recently added to the kernel and plugging
    binutils's libopcodes disassembly of BPF programs with the existing
    annotation interfaces in 'perf annotate', 'perf report' and 'perf top'
    various output formats (--stdio, --stdio2, --tui).

perf list:

  Andi Kleen:

  - Filter metrics when using substring search.

perf record:

  Andi Kleen:

  - Allow to limit number of reported perf.data files

  - Clarify help for --switch-output.

perf report:

  Andi Kleen

  - Indicate JITed code better.

  - Show all sort keys in help output.

perf script:

  Andi Kleen:

  - Support relative time.

perf stat:

  Andi Kleen:

  - Improve scaling.

General:

  Changbin Du:

  - Fix some mostly error path memory and reference count leaks found
    using gcc's ASan and UBSan.

Vendor events:

  Mamatha Inamdar:

  - Remove P8 HW events which are not supported.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Merge tag 'perf-core-for-mingo-5.1-20190311' of git://git./linux/kernel/git/acme/linux into perf/urgent

Pull perf/core improvements and fixes from Arnaldo:

kernel:

  Stephane Eranian :

  - Restore mmap record type correctly when handling PERF_RECORD_MMAP2
    events, as the same template is used for all the threads interested
    in mmap events, some may want just PERF_RECORD_MMAP, while some
    may want the extra info in MMAP2 records.

perf probe:

  Adrian Hunter:

  - Fix getting the kernel map, because since changes related to x86 PTI
    entry trampolines handling, there are more than one kernel map.

perf script:

  Andi Kleen:

  - Support insn output for normal samples, i.e.:

    perf script -F ip,sym,insn --xed

    Will fetch the sample IP from the thread address space and feed it
    to Intel's XED disassembler, producing lines such as:

      ffffffffa4068804 native_write_msr            wrmsr
      ffffffffa415b95e __hrtimer_next_event_base   movq  0x18(%rax), %rdx

    That match 'perf annotate's output.

  - Make the --cpu filter apply to  PERF_RECORD_COMM/FORK/... events, in
    addition to PERF_RECORD_SAMPLE.

perf report:

  - Add a new --samples option to save a small random number of samples
    per hist entry, using a reservoir technique to select a representative
    number of samples.

    Then allow browsing the samples using 'perf script' as part of the hist
    entry context menu. This automatically adds the right filters, so only
    the thread or CPU of the sample is displayed. Then we use less' search
    functionality to directly jump to the time stamp of the selected sample.

    It uses different menus for assembler and source display.  Assembler
    needs xed installed and source needs debuginfo.

  - Fix the UI browser scripts pop up menu when there are many scripts
    available.

perf report:

  Andi Kleen:

  - Add 'time' sort option. E.g.:

    % perf report --sort time,overhead,symbol --time-quantum 1ms --stdio
    ...
         0.67%  277061.87300  [.] _dl_start
         0.50%  277061.87300  [.] f1
         0.50%  277061.87300  [.] f2
         0.33%  277061.87300  [.] main
         0.29%  277061.87300  [.] _dl_lookup_symbol_x
         0.29%  277061.87300  [.] dl_main
         0.29%  277061.87300  [.] do_lookup_x
         0.17%  277061.87300  [.] _dl_debug_initialize
         0.17%  277061.87300  [.] _dl_init_paths
         0.08%  277061.87300  [.] check_match
         0.04%  277061.87300  [.] _dl_count_modids
         1.33%  277061.87400  [.] f1
         1.33%  277061.87400  [.] f2
         1.33%  277061.87400  [.] main
         1.17%  277061.87500  [.] main
         1.08%  277061.87500  [.] f1
         1.08%  277061.87500  [.] f2
         1.00%  277061.87600  [.] main
         0.83%  277061.87600  [.] f1
         0.83%  277061.87600  [.] f2
         1.00%  277061.87700  [.] main

tools headers:

  Arnaldo Carvalho de Melo:

  - Update x86's syscall_64.tbl, no change in tools/perf behaviour.

  -  Sync copies asm-generic/unistd.h and linux/in with the kernel sources.

perf data:

  Jiri Olsa:

  - Prep work to support having perf.data stored as a directory, with one
    file per CPU, that ultimately will allow having one ring buffer reading
    thread per CPU.

Vendor events:

  Martin Liška:

  - perf PMU events for AMD Family 17h.

perf script python:

  Tony Jones:

  - Add python3 support for the remaining Intel PT related scripts, with
    these we should have a clean build of perf with python3 while still
    supporting the build with python2.

libbpf:

  Arnaldo Carvalho de Melo:

  - Fix the build on uCLibc, adding the missing stdarg.h since we use
    va_list in one typedef.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'powerpc-5.1-3' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "One fix for a boot failure on 32-bit, introduced during the merge
  window.

  A fix for our handling of CLOCK_MONOTONIC in the 64-bit VDSO. Changing
  the wall clock across the Y2038 boundary could cause CLOCK_MONOTONIC
  to jump forward and backward.

  Our spectre_v2 reporting was a bit confusing due to a bug I
  introduced. On some systems it was reporting that the count cache was
  disabled and also that we were flushing the count cache on context
  switch. Only the former is true, and given that the count cache is
  disabled it doesn't make any sense to flush it. No one reported it, so
  presumably the presence of any mitigation is all people check for.

  Finally a small build fix for zsmalloc on 32-bit.

  Thanks to: Ben Hutchings, Christophe Leroy, Diana Craciun, Guenter
  Roeck, Michael Neuling"

* tag 'powerpc-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/security: Fix spectre_v2 reporting
  powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations
  powerpc/6xx: fix setup and use of SPRN_SPRG_PGDIR for hash32
  powerpc/vdso64: Fix CLOCK_MONOTONIC inconsistencies across Y2038

Merge tag 'iommu-fixes-v5.1-rc2' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

 - AMD IOMMU fix for sg-mapping with sg->offset > PAGE_SIZE

 - Fix for IOVA code to trigger the slow-path less often

 - Two fixes for Intel VT-d to avoid writing to read-only registers and
   to flush the right domain id for the default domains in scalable mode

* tag 'iommu-fixes-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Save the right domain ID used by hardware
  iommu/vt-d: Check capability before disabling protected memory
  iommu/iova: Fix tracking of recently failed iova address
  iommu/amd: fix sg->dma_address for sg->offset bigger than PAGE_SIZE

Merge tag 'sound-5.1-rc2' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "The only significant change is the regression fixes for the jack
  detection at resume on HD-audio, while others are all small or trivial
  fixes like the coverage of missing error code or usual HD-audio quirk"

* tag 'sound-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Enable headset MIC of Acer AIO with ALC286
  ALSA: hda - Enforces runtime_resume after S3 and S4 for each codec
  ALSA: hda - Don't trigger jackpoll_work in azx_resume
  ALSA: opl3: fix mismatch between snd_opl3_drum_switch definition and declaration
  ALSA: hda - add Lenovo IdeaCentre B550 to the power_save_blacklist
  ALSA: firewire-motu: use 'version' field of unit directory to identify model
  ALSA: sb8: add a check for request_region
  ALSA: echoaudio: add a check for ioremap_nocache

drm/i915/ehl: Add Support for DMC on EHL

EHL uses the same firmware as ICL.

Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322175847.25707-6-rodrigo.vivi@intel.com

drm/i915/ehl: Set proper eu slice/subslice parameters for EHL

EHL has a different number of subslices.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322175847.25707-5-rodrigo.vivi@intel.com