bpf: Sample bpf program to set SYN/SYN-ACK RTOs

The sample BPF program, tcp_synrto_kern.c, sets the SYN and SYN-ACK
RTOs to 10ms when both hosts are within the same datacenter (i.e.
small RTTs) in an environment where common IPv6 prefixes indicate
both hosts are in the same data center.

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: Support for per connection SYN/SYN-ACK RTOs

This patch adds support for setting a per connection SYN and
SYN_ACK RTOs from within a BPF_SOCK_OPS program. For example,
to set small RTOs when it is known both hosts are within a
datacenter.

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: program to load and attach sock_ops BPF progs

The program load_sock_ops can be used to load sock_ops bpf programs and
to attach it to an existing (v2) cgroup. It can also be used to detach
sock_ops programs.

Examples:
    load_sock_ops [-l] <cg-path> <prog filename>
Load and attaches a sock_ops program at the specified cgroup.
If "-l" is used, the program will continue to run to output the
BPF log buffer.
If the specified filename does not end in ".o", it appends
"_kern.o" to the name.

    load_sock_ops -r <cg-path>
Detaches the currently attached sock_ops program from the
specified cgroup.

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: BPF support for sock_ops

Created a new BPF program type, BPF_PROG_TYPE_SOCK_OPS, and a corresponding
struct that allows BPF programs of this type to access some of the
socket's fields (such as IP addresses, ports, etc.). It uses the
existing bpf cgroups infrastructure so the programs can be attached per
cgroup with full inheritance support. The program will be called at
appropriate times to set relevant connections parameters such as buffer
sizes, SYN and SYN-ACK RTOs, etc., based on connection information such
as IP addresses, port numbers, etc.

Alghough there are already 3 mechanisms to set parameters (sysctls,
route metrics and setsockopts), this new mechanism provides some
distinct advantages. Unlike sysctls, it can set parameters per
connection. In contrast to route metrics, it can also use port numbers
and information provided by a user level program. In addition, it could
set parameters probabilistically for evaluation purposes (i.e. do
something different on 10% of the flows and compare results with the
other 90% of the flows). Also, in cases where IPv6 addresses contain
geographic information, the rules to make changes based on the distance
(or RTT) between the hosts are much easier than route metric rules and
can be global. Finally, unlike setsockopt, it oes not require
application changes and it can be updated easily at any time.

Although the bpf cgroup framework already contains a sock related
program type (BPF_PROG_TYPE_CGROUP_SOCK), I created the new type
(BPF_PROG_TYPE_SOCK_OPS) beccause the existing type expects to be called
only once during the connections's lifetime. In contrast, the new
program type will be called multiple times from different places in the
network stack code.  For example, before sending SYN and SYN-ACKs to set
an appropriate timeout, when the connection is established to set
congestion control, etc. As a result it has "op" field to specify the
type of operation requested.

The purpose of this new program type is to simplify setting connection
parameters, such as buffer sizes, TCP's SYN RTO, etc. For example, it is
easy to use facebook's internal IPv6 addresses to determine if both hosts
of a connection are in the same datacenter. Therefore, it is easy to
write a BPF program to choose a small SYN RTO value when both hosts are
in the same datacenter.

This patch only contains the framework to support the new BPF program
type, following patches add the functionality to set various connection
parameters.

This patch defines a new BPF program type: BPF_PROG_TYPE_SOCKET_OPS
and a new bpf syscall command to load a new program of this type:
BPF_PROG_LOAD_SOCKET_OPS.

Two new corresponding structs (one for the kernel one for the user/BPF
program):

/* kernel version */
struct bpf_sock_ops_kern {
        struct sock *sk;
        __u32  op;
        union {
                __u32 reply;
                __u32 replylong[4];
        };
};

/* user version
 * Some fields are in network byte order reflecting the sock struct
 * Use the bpf_ntohl helper macro in samples/bpf/bpf_endian.h to
 * convert them to host byte order.
 */
struct bpf_sock_ops {
        __u32 op;
        union {
                __u32 reply;
                __u32 replylong[4];
        };
        __u32 family;
        __u32 remote_ip4;     /* In network byte order */
        __u32 local_ip4;      /* In network byte order */
        __u32 remote_ip6[4];  /* In network byte order */
        __u32 local_ip6[4];   /* In network byte order */
        __u32 remote_port;    /* In network byte order */
        __u32 local_port;     /* In host byte horder */
};

Currently there are two types of ops. The first type expects the BPF
program to return a value which is then used by the caller (or a
negative value to indicate the operation is not supported). The second
type expects state changes to be done by the BPF program, for example
through a setsockopt BPF helper function, and they ignore the return
value.

The reply fields of the bpf_sockt_ops struct are there in case a bpf
program needs to return a value larger than an integer.

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2017-07-01

Here are some more Bluetooth patches for the 4.13 kernel:

 - Added support for Broadcom BCM43430 controllers
 - Added sockaddr length checks before accessing sa_family
 - Fixed possible "might sleep" errors in bnep, cmtp and hidp modules
 - A few other minor fixes

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: Add peeloff-flags socket option

Based on a request raised on the sctp devel list, there is a need to
augment the sctp_peeloff operation while specifying the O_CLOEXEC and
O_NONBLOCK flags (simmilar to the socket syscall).  Since modifying the
SCTP_SOCKOPT_PEELOFF socket option would break user space ABI for existing
programs, this patch creates a new socket option
SCTP_SOCKOPT_PEELOFF_FLAGS, which accepts a third flags parameter to
allow atomic assignment of the socket descriptor flags.

Tested successfully by myself and the requestor

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Andreas Steinmetz <ast@domdv.de>
CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sfc-MCDI-cleanups'

Edward Cree says:

====================
sfc: small MCDI cleanups

Giving the full MCDI event rather than just the code can aid in
 debugging.  While fixing this I noticed an outdated comment.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: correct comment on efx_mcdi_process_event

Fix out-of-date comment.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: change Unknown MCDI event message to print full event.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5: fix spelling mistake: "Allodating" -> "Allocating"

Trivial fix to spelling mistake in mlx5_core_dbg debug message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'nfc-next-4.13-1' of git://git./linux/kernel/git/sameo/nfc-next

Samuel Ortiz says:

====================
NFC 4.13 pull request

This is the NFC pull requesy for 4.13. We have:

- A conversion to unified device and GPIO APIs for the
  fdp, pn544, and st{21,-nci} drivers.
- A fix for NFC device IDs allocation.
- A fix for the nfcmrvl driver firmware download mechanism.
- A trf7970a DT and GPIO cleanup and clock setting fix.
- A few fixes for potential overflows in the digital and LLCP code.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

arm: sunxi: Revert changes merged through net-next.

This reverts commits 2c0cba482e79 ("arm: sun8i: sunxi-h3-h5: Add dt node
for the syscon control module") to 2428fd0fe550 ("arm64: defconfig: Enable
dwmac-sun8i driver on defconfig") and 3432a86e641c ("arm: sun8i:
orangepipc: use internal phy-mode") to 5a79b4f2a5e7 ("arm: sun8i:
orangepi-2: use internal phy-mode") that should be merged
through the arm-soc tree, and end up in merge conflicts and build failures.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-for-davem-2017-06-30' of git://git./linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.13

Mostly fixes and cleanups, but iwlwifi and rtlwifi had also some new
features.

Major changes:

iwlwifi

* some changes in suspend/resume handling to support new FWs

* Continued work towards the A000 family

* support for a new version of the TX flush FW API

* remove some noise from the kernel logs

rtlwifi

* more bluetooth coexistance improvements
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

datapath: Avoid using stack larger than 1024.

When compiling OvS-master on 4.4.0-81 kernel,
there is a warning:

    CC [M]  /root/ovs/datapath/linux/datapath.o
    /root/ovs/datapath/linux/datapath.c: In function
    'ovs_flow_cmd_set':
    /root/ovs/datapath/linux/datapath.c:1221:1: warning:
    the frame size of 1040 bytes is larger than 1024 bytes
    [-Wframe-larger-than=]

This patch factors out match-init and action-copy to avoid
"Wframe-larger-than=1024" warning. Because mask is only
used to get actions, we new a function to save some
stack space.

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sctp-remove-typedefs-from-structures-part-1'

Xin Long says:

====================
sctp: remove typedefs from structures part 1

As we know, typedef is suggested not to use in kernel, even checkpatch.pl
also gives warnings about it. Now sctp is using it for many structures.

All this kind of typedef's using should be removed. As the 1st part, this
patchset is to remove it for 11 basic structures in linux/sctp.h. It is
also to fix some indents.

No any code's logic is changed in these patches, only cleaning up.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: remove the typedef sctp_init_chunk_t

This patch is to remove the typedef sctp_init_chunk_t, and replace
with struct sctp_init_chunk in the places where it's using this
typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: remove the typedef sctp_inithdr_t

This patch is to remove the typedef sctp_inithdr_t, and replace
with struct sctp_inithdr in the places where it's using this
typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: remove the typedef sctp_data_chunk_t

This patch is to remove the typedef sctp_data_chunk_t, and replace
with struct sctp_data_chunk in the places where it's using this
typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: remove the typedef sctp_datahdr_t

This patch is to remove the typedef sctp_datahdr_t, and replace with
struct sctp_datahdr in the places where it's using this typedef.

It is also to use izeof(variable) instead of sizeof(type).

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: remove the typedef sctp_param_action_t

Remove this typedef, there is even no places using it.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: remove the typedef sctp_param_t

This patch is to remove the typedef sctp_param_t, and replace with
struct sctp_paramhdr in the places where it's using this typedef.

It is also to remove the useless declaration sctp_addip_addr_config
and fix the lack of params for some other functions' declaration.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: remove the typedef sctp_paramhdr_t

This patch is to remove the typedef sctp_paramhdr_t, and replace
with struct sctp_paramhdr in the places where it's using this
typedef.

It is also to fix some indents and  use sizeof(variable) instead
of sizeof(type).

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: remove the typedef sctp_cid_action_t

Remove this typedef, there is even no places using it.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: remove the typedef sctp_cid_t

This patch is to remove the typedef sctp_cid_t, and replace
with struct sctp_cid in the places where it's using this
typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: remove the typedef sctp_chunkhdr_t

This patch is to remove the typedef sctp_chunkhdr_t, and replace
with struct sctp_chunkhdr in the places where it's using this
typedef.

It is also to fix some indents and use sizeof(variable) instead
of sizeof(type)., especially in sctp_new.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: remove the typedef sctp_sctphdr_t

This patch is to remove the typedef sctp_sctphdr_t, and replace
with struct sctphdr in the places where it's using this typedef.

It is also to fix some indents and use sizeof(variable) instead
of sizeof(type).

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'nfp-introduce-flower-offload-capabilities'

Simon Horman says:

====================
nfp: introduce flower offload capabilities

this series adds flower offload to the NFP driver. It builds on recent
work to add representor and a skeleton flower app - now the app does what
its name says.

In general the approach taken is to allow some flows within
the universe of possible flower matches and tc actions to be offloaded.
It is planned that this support will grow over time but the support
offered by this patch-set seems to be a reasonable starting point.

Key Changes since v2:
* Revised flow structures to simplify setup/teardown and locking of stats
* Addressed other code-change review of v2

Other review questions regarding v2 have been answered on netdev.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: add control message passing capabilities to flower offloads

Previously the flower offloads never sends messages to the hardware,
and never registers a handler for receiving messages from hardware.
This patch enables the flower offloads to send control messages to
hardware when adding and removing flow rules. Additionally it
registers a control message rx handler for receiving stats updates
from hardware for each offloaded flow.

Additionally this patch adds 4 control message types; Add, modify and
delete flow, as well as flow stats. It also allows
nfp_flower_cmsg_get_data() to be used outside of cmsg.c.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: add a stats handler for flower offloads

Previously there was no way of updating flow rule stats after they
have been offloaded to hardware. This is solved by keeping track of
stats received from hardware and providing this to the TC handler
on request.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: add metadata to each flow offload

Adds metadata describing the mask id of each flow and keeps track of
flows installed in hardware. Previously a flow could not be removed
from hardware as there was no way of knowing if that a specific flow
was installed. This is solved by storing the offloaded flows in a
hash table.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: add basic action capabilities to flower offloads

Adds push vlan, pop vlan, output and drop action capabilities
to flower offloads.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: extend flower matching capabilities

Extends matching capabilities for flower offloads to include vlan,
layer 2, layer 3 and layer 4 type matches. This includes both exact
and wildcard matching.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: extend flower add flow offload

Extends the flower flow add function by calculating which match
fields are present in the flower offload structure and allocating
the appropriate space to describe these.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: provide infrastructure for offloading flower based TC filters

Adds a flower based TC offload handler for representor devices, this
is in addition to the bpf based offload handler. The changes in this
patch will be used in a follow-up patch to add tc flower offload to
the NFP.

The flower app enables tc offloads on representors by default.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: add phys_switch_id support

Add phys_switch_id support by allowing lookup of
SWITCHDEV_ATTR_ID_PORT_PARENT_ID via the nfp_repr_port_attr_get
switchdev operation.

This is visible to user-space in the phys_switch_id attribute
of a netdev.

e.g.

cd /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0
find . -name phys_switch_id | xargs grep .
./net/eth3/phys_switch_id:00154d1300bd
./net/eth4/phys_switch_id:00154d1300bd
./net/eth2/phys_switch_id:00154d1300bd
grep: ./net/eth5/phys_switch_id: Operation not supported

In the above eth2 and eth3 and representor netdevs for the first and second
physical port. eth4 is the representor for the PF. And eth5 is the PF netdev.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: switchdev: add SET_SWITCHDEV_OPS helper

Add a helper to allow switchdev ops to be set if NET_SWITCHDEV is configured
and do nothing otherwise. This allows for slightly cleaner code which
uses switchdev but does not select NET_SWITCHDEV.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: remove an unnecessary check from sctp_endpoint_destroy

ep->base.sk gets it's value since sctp_endpoint_new, nowhere
will change it. So there's no need to check if it's null, as
it can never be null.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-refcount_t'

Elena Reshetova says:

====================
v3 net generic subsystem refcount conversions

Changes in v3:
Rebased on top of the net-next tree.

Changes in v2:
No changes in patches apart from rebases, but now by
default refcount_t = atomic_t (*) and uses all atomic standard operations
unless CONFIG_REFCOUNT_FULL is enabled. This is a compromise for the
systems that are critical on performance (such as net) and cannot accept even
slight delay on the refcounter operations.

This series, for core network subsystem components, replaces atomic_t reference
counters with the new refcount_t type and API (see include/linux/refcount.h).
By doing this we prevent intentional or accidental
underflows or overflows that can led to use-after-free vulnerabilities.
These patches contain only generic net pieces. Other changes will be sent separately.

The patches are fully independent and can be cherry-picked separately.
The big patches, such as conversions for sock structure, need a very detailed
look from maintainers: refcount managing is quite complex in them and while
it seems that they would benefit from the change, extra checking is needed.
The biggest corner issue is the fact that refcount_inc() does not increment
from zero.

If there are no objections to the patches, please merge them via respective trees.

* The respective change is currently merged into -next as
  "locking/refcount: Create unchecked atomic_t implementation".
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert packet_fanout.sk_ref from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert netlbl_lsm_cache.refcount from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert net.passive from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert inet_frag_queue.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert fib_rule.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert unix_address.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert netpoll_info.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert in_device.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert ip_mc_list.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert sock.sk_refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

This patch uses refcount_inc_not_zero() instead of
atomic_inc_not_zero_hint() due to absense of a _hint()
version of refcount API. If the hint() version must
be used, we might need to revisit API.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert sock.sk_wmem_alloc from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert sk_buff_fclones.fclone_ref from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert sk_buff.users from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert nf_bridge_info.use from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert neigh_params.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert neighbour.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: convert inet_peer.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
This conversion requires overall +1 on the whole
refcounting scheme.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'PTP-support-for-macb-driver'

Rafal Ozieblo says:

====================
PTP support for macb driver

This patch series adds support for PTP synchronization protocol
in Cadence GEM driver based on PHC.

v2 changes:
* removed alarm's support
* removed external time stamp support
* removed PTP event interrupt handling
* removed ptp_hw_support flag
* removed all extra sanity checks
* removed unnecessary #ifdef
* fixed coding style and alligment issues
* renamed macb.c to macb_main.c

v3 changes:
* added checking NULL ptr from ptp_clock_register()
* fixed error codes return
* locals list in "upside down Christmas tree" style
* fixed some other issues from review

v4 changes:
* respin to the newest next-next (28 Jun 2017)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: Add hardware PTP support

This patch is based on original Harini's patch and Andrei's patch,
implemented in a separate file to ease the review/maintanance
and integration with other platforms.

This driver supports GEM-GXL:
- Register ptp clock framework
- Initialize PTP related registers
- HW time stamp on the PTP Ethernet packets are received using the
  SO_TIMESTAMPING API. Time stamps are obtained from the dma buffer
  descriptors
- add macb_ptp to compilation chain

Signed-off-by: Rafal Ozieblo <rafalo@cadence.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: macb.c changed to macb_main.c

In case that macb is compiled as a module, macb.c has been renamed to
macb_main.c to avoid naming confusion in Makefile.

Signed-off-by: Rafal Ozieblo <rafalo@cadence.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: Add tsu_clk to device tree

Signed-off-by: Rafal Ozieblo <rafalo@cadence.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: Add support for PTP timestamps in DMA descriptors

This patch adds support for PTP timestamps in
DMA buffer descriptors. It checks capability at runtime
and uses appropriate buffer descriptor.

Signed-off-by: Rafal Ozieblo <rafalo@cadence.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/davem/net

A set of overlapping changes in macvlan and the rocker
driver, nothing serious.

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/pablo/nf-next

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for your net-next
tree. This batch contains connection tracking updates for the cleanup
iteration path, patches from Florian Westphal:

X) Skip unconfirmed conntracks in nf_ct_iterate_cleanup_net(), just set
   dying bit to let the CPU release them.

X) Add nf_ct_iterate_destroy() to be used on module removal, to kill
   conntrack from all namespace.

X) Restart iteration on hashtable resizing, since both may occur at
   the same time.

X) Use the new nf_ct_iterate_destroy() to remove conntrack with NAT
   mapping on module removal.

X) Use nf_ct_iterate_destroy() to remove conntrack entries helper
   module removal, from Liping Zhang.

X) Use nf_ct_iterate_cleanup_net() to remove the timeout extension
   if user requests this, also from Liping.

X) Add net_ns_barrier() and use it from FTP helper, so make sure
   no concurrent namespace removal happens at the same time while
   the helper module is being removed.

X) Use NFPROTO_MAX in layer 3 conntrack protocol array, to reduce
   module size. Same thing in nf_tables.

Updates for the nf_tables infrastructure:

X) Prepare usage of the extended ACK reporting infrastructure for
   nf_tables.

X) Remove unnecessary forward declaration in nf_tables hash set.

X) Skip set size estimation if number of element is not specified.

X) Changes to accomodate a (faster) unresizable hash set implementation,
   for anonymous sets and dynamic size fixed sets with no timeouts.

X) Faster lookup function for unresizable hash table for 2 and 4
   bytes key.

And, finally, a bunch of asorted small updates and cleanups:

X) Do not hold reference to netdev from ipt_CLUSTER, instead subscribe
   to device events and look up for index from the packet path, this
   is fixing an issue that is present since the very beginning, patch
   from Xin Long.

X) Use nf_register_net_hook() in ipt_CLUSTER, from Florian Westphal.

X) Use ebt_invalid_target() whenever possible in the ebtables tree,
   from Gao Feng.

X) Calm down compilation warning in nf_dup infrastructure, patch from
   stephen hemminger.

X) Statify functions in nftables rt expression, also from stephen.

X) Update Makefile to use canonical method to specify nf_tables-objs.
   From Jike Song.

X) Use nf_conntrack_helpers_register() in amanda and H323.

X) Space cleanup for ctnetlink, from linzhang.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Need to access netdev->num_rx_queues behind an accessor in netvsc
    driver otherwise the build breaks with some configs, from Arnd
    Bergmann.

 2) Add dummy xfrm_dev_event() so that build doesn't fail when
    CONFIG_XFRM_OFFLOAD is not set. From Hangbin Liu.

 3) Don't OOPS when pfkey_msg2xfrm_state() signals an erros, from Dan
    Carpenter.

 4) Fix MCDI command size for filter operations in sfc driver, from
    Martin Habets.

 5) Fix UFO segmenting so that we don't calculate incorrect checksums,
    from Michal Kubecek.

 6) When ipv6 datagram connects fail, reset destination address and
    port. From Wei Wang.

 7) TCP disconnect must reset the cached receive DST, from WANG Cong.

 8) Fix sign extension bug on 32-bit in dev_get_stats(), from Eric
    Dumazet.

 9) fman driver has to depend on HAS_DMA, from Madalin Bucur.

10) Fix bpf pointer leak with xadd in verifier, from Daniel Borkmann.

11) Fix negative page counts with GFO, from Michal Kubecek.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
  sfc: fix attempt to translate invalid filter ID
  net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()
  bpf: prevent leaking pointer via xadd on unpriviledged
  arcnet: com20020-pci: add missing pdev setup in netdev structure
  arcnet: com20020-pci: fix dev_id calculation
  arcnet: com20020: remove needless base_addr assignment
  Trivial fix to spelling mistake in arc_printk message
  arcnet: change irq handler to lock irqsave
  rocker: move dereference before free
  mlxsw: spectrum_router: Fix NULL pointer dereference
  net: sched: Fix one possible panic when no destroy callback
  virtio-net: serialize tx routine during reset
  net: usb: asix88179_178a: Add support for the Belkin B2B128
  fsl/fman: add dependency on HAS_DMA
  net: prevent sign extension in dev_get_stats()
  tcp: reset sk_rx_dst in tcp_disconnect()
  net: ipv6: reset daddr and dport in sk if connect() fails
  bnx2x: Don't log mc removal needlessly
  bnxt_en: Fix netpoll handling.
  bnxt_en: Add missing logic to handle TPA end error conditions.
  ...

Merge tag 'for-4.12/dm-fixes-5' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - dm thinp fix for crash that will occur when metadata device failure
   races with discard passdown to the underlying data device.

 - dm raid fix to not access the superblock's >= 1.9.0 'sectors' member
   unconditionally.

* tag 'for-4.12/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm thin: do not queue freed thin mapping for next stage processing
  dm raid: fix oops on upgrading to extended superblock format

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "Two fixes that should go into this release.

  One is an nvme regression fix from Keith, fixing a missing queue
  freeze if the controller is being reset. This causes the reset to
  hang.

  The other is a fix for a leak of the bio protection info, if smaller
  sized O_DIRECT is used. This fix should be more involved as we have
  other problematic paths in the kernel, but given as this isn't a
  regression in this series, we'll tackle those for 4.13"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: provide bio_uninit() free freeing integrity/task associations
  nvme/pci: Fix stuck nvme reset

sfc: fix attempt to translate invalid filter ID

When filter insertion fails with no rollback, we were trying to convert
 EFX_EF10_FILTER_ID_INVALID to an id to store in 'ids' (which is either
 vlan->uc or vlan->mc).  This would WARN_ON_ONCE and then record a bogus
 filter ID of 0x1fff, neither of which is a good thing.

Fixes: 0ccb998bf46d ("sfc: fix filter_id misinterpretation in edge case")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mlx4-dynamic-tc-tx-queues'

Tariq Toukan says:

====================
mlx4_en dynamic TC tx queues

This patchset from Inbar aligns the number of TX queues
to the actual need, according to the TC configuration.

Series generated against net-next commit:
2ee87db3a287 Merge branch 'nfp-get_phys_port_name-for-representors-and-SR-IOV-reorder'
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx4_en: Do not allocate redundant TX queues when TC is disabled

Currently the number of TX queues that are allocated doesn't depend
on the number of TCs, the module always loads with max num of UP
per channel.
In order to prevent the allocation of unnecessary memory, the
module will load with minimum number of UPs per channel, and the
user will be able to control the number of TX queues per channel
by changing the number of TC to 8 using the tc command.
The variable num_up will hold the information about the current
number of UPs.
Due to the change, needed to remove the lines that set the value of
UP to be different than zero in the func "mlx4_en_select_queue",
since now the num of TX queues that are allocated is only one per channel
in default.
In order not to force the UP to be zero in case of only one TC, added
a condition before forcing it in the func "mlx4_en_fill_qp_context".

Tested:
After the module is loaded with minimum number of UP per channel, to
increase num of TCs to 8, use:
tc qdisc add dev ens8 root mqprio num_tc 8
In order to decrease the number of TCs to minimum number of UP per channel,
use:
tc qdisc del dev ens8 root

Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: Tarick Bedeir <tarick@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx4_en: Add dynamic variable to hold the number of user priorities (UP)

Until this patch, the number of UPs was hard coded for eight.
Replace this with a variable in struct "mlx4_en_port_profile".
Currently, the variable will hold the maximum number of UP,
as before.
The patch creates an infrastructure to add an option for dynamic
change of the actual number of TCs.

Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: Tarick Bedeir <tarick@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()

Recently I started seeing warnings about pages with refcount -1. The
problem was traced to packets being reused after their head was merged into
a GRO packet by skb_gro_receive(). While bisecting the issue pointed to
commit c21b48cc1bbf ("net: adjust skb->truesize in ___pskb_trim()") and
I have never seen it on a kernel with it reverted, I believe the real
problem appeared earlier when the option to merge head frag in GRO was
implemented.

Handling NAPI_GRO_FREE_STOLEN_HEAD state was only added to GRO_MERGED_FREE
branch of napi_skb_finish() so that if the driver uses napi_gro_frags()
and head is merged (which in my case happens after the skb_condense()
call added by the commit mentioned above), the skb is reused including the
head that has been merged. As a result, we release the page reference
twice and eventually end up with negative page refcount.

To fix the problem, handle NAPI_GRO_FREE_STOLEN_HEAD in napi_frags_finish()
the same way it's done in napi_skb_finish().

Fixes: d7e8883cfcf4 ("net: make GRO aware of skb->head_frag")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bridge: constify attribute_group structures.

attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
   2645     896       0    3541     dd5 net/bridge/br_sysfs_br.o

File size After adding 'const':
   text    data     bss     dec     hex filename
   2701     832       0    3533     dcd net/bridge/br_sysfs_br.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: constify attribute_group structures.

attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/device.h> work with const
attribute_group. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
   9968    3168      16   13152    3360 net/core/net-sysfs.o

File size After adding 'const':
   text    data     bss     dec     hex filename
  10160    2976      16   13152    3360 net/core/net-sysfs.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: freescale: gianfar : constify dev_pm_ops structures.

dev_pm_ops are not supposed to change at runtime. All functions
working with dev_pm_ops provided by <linux/device.h> work with const
dev_pm_ops. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
  19057     392       0   19449    4bf9 drivers/net/ethernet/freescale/gianfar.o

File size After adding 'const':
   text    data     bss     dec     hex filename
  19249     192       0   19441    4bf1 drivers/net/ethernet/freescale/gianfar.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: smc91x: constify dev_pm_ops structures.

dev_pm_ops are not supposed to change at runtime. All functions
working with dev_pm_ops provided by <linux/device.h> work with const
dev_pm_ops. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
  18709     401       0   19110    4aa6 drivers/net/ethernet/smsc/smc91x.o

File size After adding 'const':
   text    data     bss     dec     hex filename
  18901     201       0   19102    4a9e drivers/net/ethernet/smsc/smc91x.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ibm: ibmveth: constify dev_pm_ops structures.

dev_pm_ops are not supposed to change at runtime. All functions
working with dev_pm_ops provided by <linux/device.h> work with const
dev_pm_ops. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
  15426    1256       0   16682    412a drivers/net/ethernet/ibm/ibmveth.o

File size After adding 'const':
   text    data     bss     dec     hex filename
  15618    1064       0   16682    412a drivers/net/ethernet/ibm/ibmveth.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: prevent leaking pointer via xadd on unpriviledged

Leaking kernel addresses on unpriviledged is generally disallowed,
for example, verifier rejects the following:

  0: (b7) r0 = 0
  1: (18) r2 = 0xffff897e82304400
  3: (7b) *(u64 *)(r1 +48) = r2
  R2 leaks addr into ctx

Doing pointer arithmetic on them is also forbidden, so that they
don't turn into unknown value and then get leaked out. However,
there's xadd as a special case, where we don't check the src reg
for being a pointer register, e.g. the following will pass:

  0: (b7) r0 = 0
  1: (7b) *(u64 *)(r1 +48) = r0
  2: (18) r2 = 0xffff897e82304400 ; map
  4: (db) lock *(u64 *)(r1 +48) += r2
  5: (95) exit

We could store the pointer into skb->cb, loose the type context,
and then read it out from there again to leak it eventually out
of a map value. Or more easily in a different variant, too:

   0: (bf) r6 = r1
   1: (7a) *(u64 *)(r10 -8) = 0
   2: (bf) r2 = r10
   3: (07) r2 += -8
   4: (18) r1 = 0x0
   6: (85) call bpf_map_lookup_elem#1
   7: (15) if r0 == 0x0 goto pc+3
   R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp
   8: (b7) r3 = 0
   9: (7b) *(u64 *)(r0 +0) = r3
  10: (db) lock *(u64 *)(r0 +0) += r6
  11: (b7) r0 = 0
  12: (95) exit

  from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp
  11: (b7) r0 = 0
  12: (95) exit

Prevent this by checking xadd src reg for pointer types. Also
add a couple of test cases related to this.

Fixes: 1be7f75d1668 ("bpf: enable non-root eBPF programs")
Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Fix assignment of RX/TX IRQ's

The driver currently creates RX/TX queues during device probe, but
assigns IRQ's to them during device open. On reset, however,
IRQ's are assigned when resetting the queues. If there is a reset
while the device is closed and the device is later opened, the driver will
request IRQ's twice, causing the open to fail. This patch assigns
the IRQ's in the ibmvnic_init function after the queues are reset or
initialized, ensuring IRQ's are only requested once.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipmr: Add ipmr_rtm_getroute

Add to RTNL_FAMILY_IPMR, RTM_GETROUTE the ability
to retrieve one S,G mroute from a specified table.

*,G will return mroute information for just that
particular mroute if it exists.  This is because
it is entirely possible to have more S's then
can fit in one skb to return to the requesting
process.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: Fix out-of-bound access on interpreters[]

The index is off-by-one when fp->aux->stack_depth
has already been rounded up to 32.  In particular,
if stack_depth is 512, the index will be 16.

The fix is to round_up and then takes -1 instead of round_down.

[   22.318680] ==================================================================
[   22.319745] BUG: KASAN: global-out-of-bounds in bpf_prog_select_runtime+0x48a/0x670
[   22.320737] Read of size 8 at addr ffffffff82aadae0 by task sockex3/1946
[   22.321646]
[   22.321858] CPU: 1 PID: 1946 Comm: sockex3 Tainted: G        W       4.12.0-rc6-01680-g2ee87db3a287 #22
[   22.323061] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.el7.centos 04/01/2014
[   22.324260] Call Trace:
[   22.324612]  dump_stack+0x67/0x99
[   22.325081]  print_address_description+0x1e8/0x290
[   22.325734]  ? bpf_prog_select_runtime+0x48a/0x670
[   22.326360]  kasan_report+0x265/0x350
[   22.326860]  __asan_report_load8_noabort+0x19/0x20
[   22.327484]  bpf_prog_select_runtime+0x48a/0x670
[   22.328109]  bpf_prog_load+0x626/0xd40
[   22.328637]  ? __bpf_prog_charge+0xc0/0xc0
[   22.329222]  ? check_nnp_nosuid.isra.61+0x100/0x100
[   22.329890]  ? __might_fault+0xf6/0x1b0
[   22.330446]  ? lock_acquire+0x360/0x360
[   22.331013]  SyS_bpf+0x67c/0x24d0
[   22.331491]  ? trace_hardirqs_on+0xd/0x10
[   22.332049]  ? __getnstimeofday64+0xaf/0x1c0
[   22.332635]  ? bpf_prog_get+0x20/0x20
[   22.333135]  ? __audit_syscall_entry+0x300/0x600
[   22.333770]  ? syscall_trace_enter+0x540/0xdd0
[   22.334339]  ? exit_to_usermode_loop+0xe0/0xe0
[   22.334950]  ? do_syscall_64+0x48/0x410
[   22.335446]  ? bpf_prog_get+0x20/0x20
[   22.335954]  do_syscall_64+0x181/0x410
[   22.336454]  entry_SYSCALL64_slow_path+0x25/0x25
[   22.337121] RIP: 0033:0x7f263fe81f19
[   22.337618] RSP: 002b:00007ffd9a3440c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141
[   22.338619] RAX: ffffffffffffffda RBX: 0000000000aac5fb RCX: 00007f263fe81f19
[   22.339600] RDX: 0000000000000030 RSI: 00007ffd9a3440d0 RDI: 0000000000000005
[   22.340470] RBP: 0000000000a9a1e0 R08: 0000000000a9a1e0 R09: 0000009d00000001
[   22.341430] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000010000
[   22.342411] R13: 0000000000a9a023 R14: 0000000000000001 R15: 0000000000000003
[   22.343369]
[   22.343593] The buggy address belongs to the variable:
[   22.344241]  interpreters+0x80/0x980
[   22.344708]
[   22.344908] Memory state around the buggy address:
[   22.345556]  ffffffff82aad980: 00 00 00 04 fa fa fa fa 04 fa fa fa fa fa fa fa
[   22.346449]  ffffffff82aada00: 00 00 00 00 00 fa fa fa fa fa fa fa 00 00 00 00
[   22.347361] >ffffffff82aada80: 00 00 00 00 00 00 00 00 00 00 00 00 fa fa fa fa
[   22.348301]                                                        ^
[   22.349142]  ffffffff82aadb00: 00 01 fa fa fa fa fa fa 00 00 00 00 00 00 00 00
[   22.350058]  ffffffff82aadb80: 00 00 07 fa fa fa fa fa 00 00 05 fa fa fa fa fa
[   22.350984] ==================================================================

Fixes: b870aa901f4b ("bpf: use different interpreter depending on required stack size")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

amd-xgbe: fix spelling mistake: "avialable" -> "available"

Trivial fix to spelling mistake in netdev_err message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'arcnet-features'

Michael Grzeschik says:

====================
arcnet: Collection of latest features

Here we sum up the latest features to improve the arcnet framework. One
patch is used to get feedback from the transfer queue about failed xfers
by adding the err_skb message queue. Beside that we improve the
backplane status that can be read by the PCI-based cards and offer that
status via an extra sysfs attribute. In the last patch we add another
card type PCIFB2.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

arcnet: com20020-pci: add support for PCIFB2 card

We add support for the PCIFB2 card from EAE.

Beside other cards, this card has the backplane mode enabled by default.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

arcnet: com20020-pci: handle backplane mode depending on card type

We read the backplane mode of each subcard from bits 2 and 3 of the misc
register.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

arcnet: com20020-pci: add attribute to readback backplane status

We add the sysfs interface the read back the backplane
status of the interface.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

arcnet: add err_skb package for package status feedback

We need to track the status of our queued packages. This way the driving
process knows if failed packages need to be retransmitted. For this
purpose we queue the transferred/failed packages back into the err_skb
message queue added with some status information.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'arcnet-fixes'

Michael Grzeschik says:

====================
arcnet: Collection of latest fixes

Here we sum up the recent fixes I collected on the way to use and
stabilise the framework. Part of it is an possible deadlock that we
prevent as well to fix the calculation of the dev_id that can be setup
by an rotary encoder. Beside that we added an trivial spelling patch and
fix some wrong and missing assignments that improves the code footprint.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

arcnet: com20020-pci: add missing pdev setup in netdev structure

We add the pdev data to the pci devices netdev structure. This way
the interface get consistent device names in the userspace (udev).

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

arcnet: com20020-pci: fix dev_id calculation

The dev_id was miscalculated. Only the two bits 4-5 are relevant for the
MA1 card. PCIARC1 and PCIFB2 use the four bits 4-7 for id selection.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

arcnet: com20020: remove needless base_addr assignment

The assignment is superfluous.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in arc_printk message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

arcnet: change irq handler to lock irqsave

This patch prevents the arcnet driver from the following deadlock.

[   41.273910] ======================================================
[   41.280397] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
[   41.287433] 4.4.0-00034-gc0ae784 #536 Not tainted
[   41.292366] ------------------------------------------------------
[   41.298863] arcecho/233 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire:
[   41.305628]  (&(&lp->lock)->rlock){+.+...}, at: [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[   41.315199]
[   41.315199] and this task is already holding:
[   41.321324]  (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8
[   41.329593] which would create a new lock dependency:
[   41.334893]  (_xmit_ARCNET#2){+.-...} -> (&(&lp->lock)->rlock){+.+...}
[   41.341801]
[   41.341801] but this new dependency connects a SOFTIRQ-irq-safe lock:
[   41.350108]  (_xmit_ARCNET#2){+.-...}
... which became SOFTIRQ-irq-safe at:
[   41.357539]   [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.362677]   [<c063ab8c>] dev_watchdog+0x5c/0x264
[   41.367723]   [<c0094edc>] call_timer_fn+0x6c/0xf4
[   41.372759]   [<c00950b8>] run_timer_softirq+0x154/0x210
[   41.378340]   [<c0036b30>] __do_softirq+0x144/0x298
[   41.383469]   [<c0036fb4>] irq_exit+0xcc/0x130
[   41.388138]   [<c0085c50>] __handle_domain_irq+0x60/0xb4
[   41.393728]   [<c0014578>] __irq_svc+0x58/0x78
[   41.398402]   [<c0010274>] arch_cpu_idle+0x24/0x3c
[   41.403443]   [<c007127c>] cpu_startup_entry+0x1f8/0x25c
[   41.409029]   [<c09adc90>] start_kernel+0x3c0/0x3cc
[   41.414170]
[   41.414170] to a SOFTIRQ-irq-unsafe lock:
[   41.419931]  (&(&lp->lock)->rlock){+.+...}
... which became SOFTIRQ-irq-unsafe at:
[   41.427996] ...  [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.433409]   [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[   41.439646]   [<c0089120>] handle_nested_irq+0x8c/0xec
[   41.445063]   [<c03c1170>] regmap_irq_thread+0x190/0x314
[   41.450661]   [<c0087244>] irq_thread_fn+0x1c/0x34
[   41.455700]   [<c0087548>] irq_thread+0x13c/0x1dc
[   41.460649]   [<c0050f10>] kthread+0xe4/0xf8
[   41.465158]   [<c000f810>] ret_from_fork+0x14/0x24
[   41.470207]
[   41.470207] other info that might help us debug this:
[   41.470207]
[   41.478627]  Possible interrupt unsafe locking scenario:
[   41.478627]
[   41.485763]        CPU0                    CPU1
[   41.490521]        ----                    ----
[   41.495279]   lock(&(&lp->lock)->rlock);
[   41.499414]                                local_irq_disable();
[   41.505636]                                lock(_xmit_ARCNET#2);
[   41.511967]                                lock(&(&lp->lock)->rlock);
[   41.518741]   <Interrupt>
[   41.521490]     lock(_xmit_ARCNET#2);
[   41.525356]
[   41.525356]  *** DEADLOCK ***
[   41.525356]
[   41.531587] 1 lock held by arcecho/233:
[   41.535617]  #0:  (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8
[   41.544355]
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
[   41.552362] -> (_xmit_ARCNET#2){+.-...} ops: 27 {
[   41.557357]    HARDIRQ-ON-W at:
[   41.560664]                     [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.567445]                     [<c063ba28>] dev_deactivate_many+0x114/0x304
[   41.574866]                     [<c063bc3c>] dev_deactivate+0x24/0x38
[   41.581646]                     [<c0630374>] linkwatch_do_dev+0x40/0x74
[   41.588613]                     [<c06305d8>] __linkwatch_run_queue+0xec/0x140
[   41.596120]                     [<c0630658>] linkwatch_event+0x2c/0x34
[   41.602991]                     [<c004af30>] process_one_work+0x188/0x40c
[   41.610131]                     [<c004b200>] worker_thread+0x4c/0x480
[   41.616912]                     [<c0050f10>] kthread+0xe4/0xf8
[   41.623048]                     [<c000f810>] ret_from_fork+0x14/0x24
[   41.629735]    IN-SOFTIRQ-W at:
[   41.633039]                     [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.639820]                     [<c063ab8c>] dev_watchdog+0x5c/0x264
[   41.646508]                     [<c0094edc>] call_timer_fn+0x6c/0xf4
[   41.653190]                     [<c00950b8>] run_timer_softirq+0x154/0x210
[   41.660425]                     [<c0036b30>] __do_softirq+0x144/0x298
[   41.667201]                     [<c0036fb4>] irq_exit+0xcc/0x130
[   41.673518]                     [<c0085c50>] __handle_domain_irq+0x60/0xb4
[   41.680754]                     [<c0014578>] __irq_svc+0x58/0x78
[   41.687077]                     [<c0010274>] arch_cpu_idle+0x24/0x3c
[   41.693769]                     [<c007127c>] cpu_startup_entry+0x1f8/0x25c
[   41.701006]                     [<c09adc90>] start_kernel+0x3c0/0x3cc
[   41.707791]    INITIAL USE at:
[   41.711003]                    [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.717696]                    [<c063ba28>] dev_deactivate_many+0x114/0x304
[   41.725026]                    [<c063bc3c>] dev_deactivate+0x24/0x38
[   41.731718]                    [<c0630374>] linkwatch_do_dev+0x40/0x74
[   41.738593]                    [<c06305d8>] __linkwatch_run_queue+0xec/0x140
[   41.746011]                    [<c0630658>] linkwatch_event+0x2c/0x34
[   41.752789]                    [<c004af30>] process_one_work+0x188/0x40c
[   41.759847]                    [<c004b200>] worker_thread+0x4c/0x480
[   41.766541]                    [<c0050f10>] kthread+0xe4/0xf8
[   41.772596]                    [<c000f810>] ret_from_fork+0x14/0x24
[   41.779198]  }
[   41.780945]  ... key      at: [<c124d620>] netdev_xmit_lock_key+0x38/0x1c8
[   41.788192]  ... acquired at:
[   41.791309]    [<c007bed8>] lock_acquire+0x70/0x90
[   41.796361]    [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54
[   41.802324]    [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[   41.808844]    [<c06b9380>] packet_direct_xmit+0x130/0x1c8
[   41.814622]    [<c06bc7e4>] packet_sendmsg+0x3b8/0x680
[   41.820034]    [<c05fe8b0>] sock_sendmsg+0x14/0x24
[   41.825091]    [<c05ffd68>] SyS_sendto+0xb8/0xe0
[   41.829956]    [<c05ffda8>] SyS_send+0x18/0x20
[   41.834638]    [<c000f780>] ret_fast_syscall+0x0/0x1c
[   41.839954]
[   41.841514]
the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock:
[   41.850302] -> (&(&lp->lock)->rlock){+.+...} ops: 5 {
[   41.855644]    HARDIRQ-ON-W at:
[   41.858945]                     [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.865726]                     [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[   41.873607]                     [<c0089120>] handle_nested_irq+0x8c/0xec
[   41.880666]                     [<c03c1170>] regmap_irq_thread+0x190/0x314
[   41.887901]                     [<c0087244>] irq_thread_fn+0x1c/0x34
[   41.894593]                     [<c0087548>] irq_thread+0x13c/0x1dc
[   41.901195]                     [<c0050f10>] kthread+0xe4/0xf8
[   41.907338]                     [<c000f810>] ret_from_fork+0x14/0x24
[   41.914025]    SOFTIRQ-ON-W at:
[   41.917328]                     [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.924106]                     [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[   41.931981]                     [<c0089120>] handle_nested_irq+0x8c/0xec
[   41.939028]                     [<c03c1170>] regmap_irq_thread+0x190/0x314
[   41.946264]                     [<c0087244>] irq_thread_fn+0x1c/0x34
[   41.952954]                     [<c0087548>] irq_thread+0x13c/0x1dc
[   41.959548]                     [<c0050f10>] kthread+0xe4/0xf8
[   41.965689]                     [<c000f810>] ret_from_fork+0x14/0x24
[   41.972379]    INITIAL USE at:
[   41.975595]                    [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.982283]                    [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[   41.990063]                    [<c0089120>] handle_nested_irq+0x8c/0xec
[   41.997027]                    [<c03c1170>] regmap_irq_thread+0x190/0x314
[   42.004172]                    [<c0087244>] irq_thread_fn+0x1c/0x34
[   42.010766]                    [<c0087548>] irq_thread+0x13c/0x1dc
[   42.017267]                    [<c0050f10>] kthread+0xe4/0xf8
[   42.023314]                    [<c000f810>] ret_from_fork+0x14/0x24
[   42.029903]  }
[   42.031648]  ... key      at: [<bf0854cc>] __key.42091+0x0/0xfffff0f8 [arcnet]
[   42.039255]  ... acquired at:
[   42.042372]    [<c007bed8>] lock_acquire+0x70/0x90
[   42.047413]    [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54
[   42.053364]    [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[   42.059872]    [<c06b9380>] packet_direct_xmit+0x130/0x1c8
[   42.065634]    [<c06bc7e4>] packet_sendmsg+0x3b8/0x680
[   42.071030]    [<c05fe8b0>] sock_sendmsg+0x14/0x24
[   42.076069]    [<c05ffd68>] SyS_sendto+0xb8/0xe0
[   42.080926]    [<c05ffda8>] SyS_send+0x18/0x20
[   42.085601]    [<c000f780>] ret_fast_syscall+0x0/0x1c
[   42.090918]
[   42.092481]
[   42.092481] stack backtrace:
[   42.097065] CPU: 0 PID: 233 Comm: arcecho Not tainted 4.4.0-00034-gc0ae784 #536
[   42.104751] Hardware name: Generic AM33XX (Flattened Device Tree)
[   42.111183] [<c0017ec8>] (unwind_backtrace) from [<c00139d0>] (show_stack+0x10/0x14)
[   42.119337] [<c00139d0>] (show_stack) from [<c02a82c4>] (dump_stack+0x8c/0x9c)
[   42.126937] [<c02a82c4>] (dump_stack) from [<c0078260>] (check_usage+0x4bc/0x63c)
[   42.134815] [<c0078260>] (check_usage) from [<c0078438>] (check_irq_usage+0x58/0xb0)
[   42.142964] [<c0078438>] (check_irq_usage) from [<c007aaa0>] (__lock_acquire+0x1524/0x20b0)
[   42.151740] [<c007aaa0>] (__lock_acquire) from [<c007bed8>] (lock_acquire+0x70/0x90)
[   42.159886] [<c007bed8>] (lock_acquire) from [<c06f9140>] (_raw_spin_lock_irqsave+0x40/0x54)
[   42.168768] [<c06f9140>] (_raw_spin_lock_irqsave) from [<bf083bc8>] (arcnet_send_packet+0x60/0x1c0 [arcnet])
[   42.179115] [<bf083bc8>] (arcnet_send_packet [arcnet]) from [<c06b9380>] (packet_direct_xmit+0x130/0x1c8)
[   42.189182] [<c06b9380>] (packet_direct_xmit) from [<c06bc7e4>] (packet_sendmsg+0x3b8/0x680)
[   42.198059] [<c06bc7e4>] (packet_sendmsg) from [<c05fe8b0>] (sock_sendmsg+0x14/0x24)
[   42.206199] [<c05fe8b0>] (sock_sendmsg) from [<c05ffd68>] (SyS_sendto+0xb8/0xe0)
[   42.213978] [<c05ffd68>] (SyS_sendto) from [<c05ffda8>] (SyS_send+0x18/0x20)
[   42.221388] [<c05ffda8>] (SyS_send) from [<c000f780>] (ret_fast_syscall+0x0/0x1c)

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
   ---
   v1 -> v2: removed unneeded zero assignment of flags
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'amd-xgbe-updates'

Tom Lendacky says:

====================
amd-xgbe: AMD XGBE driver updates 2016-06-28

The following updates and fixes are included in this driver update series:

- Simplify mailbox interface code
- Fix SFP supported and advertising settings
- Fix PTP initialization register usage
- Insure there is timestamp skb present before using it
- Add a timeout to timestamp register updates
- Handle return code from software reset function
- Some fixes for handling 2.5Gbps rates
- Limit I2C error messages
- Fix non-DMA interrupt handling through tasklet usage
- Add NUMA affinity support for memory allocations
- Add NUMA affinity support for interrupts
- Prepare for more fine-grained cache coherency controls
- Simplify setting the DMA burst length programming
- Performance improvements

This patch series is based on net-next.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

amd-xgbe: Adjust register settings to improve performance

Add support to change some general performance settings and to provide
some performance settings based on the device that is probed.

This includes:

- Setting the maximum read/write outstanding request limit
- Reducing the AXI interface burst length size
- Selectively setting the Tx and Rx descriptor pre-fetch threshold
- Selectively setting additional cache coherency controls

Tested and verified on all versions of the hardware.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

amd-xgbe: Simplify the burst length settings

Currently the driver hardcodes the PBLx8 setting.  Remove the need for
specifying the PBLx8 setting and automatically calculate based on the
specified PBL value. Since the PBLx8 setting applies to both Tx and Rx
use the same PBL value for both of them.

Also, the driver currently uses a bit field to set the AXI master burst
len setting. Change to the full bit field range and set the burst length
based on the specified value.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

amd-xgbe: Prepare for more fine grained cache coherency controls

In prep for setting fine grained read and write DMA cache coherency
controls, allow specific values to be used to set the cache coherency
registers.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

amd-xgbe: Add NUMA affinity support for IRQ hints

For IRQ affinity, set the affinity hints for the IRQs to be (initially) on
the processors corresponding to the NUMA node of the device.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

amd-xgbe: Add NUMA affinity support for memory allocations

Add support to perform memory allocations on the node of the device. The
original allocation or the ring structure and Tx/Rx queues allocated all
of the memory at once and then carved it up for each channel and queue.
To best ensure that we get as much memory from the NUMA node as we can,
break the channel and ring allocations into individual allocations.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

amd-xgbe: Re-issue interrupt if interrupt status not cleared

Some of the device interrupts should function as level interrupts. For
some hardware configurations this requires setting some control bits
so that if the interrupt status has not been cleared the interrupt
should be reissued.

Additionally, when using MSI or MSI-X interrupts, run the interrupt
service routine as a tasklet so that the re-issuance of the interrupt
is handled properly.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

amd-xgbe: Limit the I2C error messages that are output

When I2C communication fails, it tends to always fail. Rather than
continuously issue an error message (once per second in most cases),
change the message to be issued just once.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

amd-xgbe: Fixes for working with PHYs that support 2.5GbE

The driver has some missing functionality when operating in the mode that
supports 2.5GbE.  Fix the driver to fully recognize and support this speed.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>