drm/amd/display: dal 3.1.31

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fixed if statement parameters to add a delay on disconnect

Signed-off-by: John Barberiz <jbarberi@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add return value for detect dp.

System soft hang when hotplug specific 4K DP panel
due to link caps read error and incorrect link setting
parmas to enable dp.
Add status check for DPCD read and add return value
for detect dp, in case of false, return from caller,
avoid further false operation.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix boot-up on vega10

Fixing null-deref on Vega10 due to regression after
'fix cursor related Pstate hang' change.
Added null checks in setting cursor position.

Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove couple of unused OPTC registers

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: turn off cursor when disconnect plane

As a precaution to prevent cases where cursor is enabled on a pipe
that is disabled, always turn off cursor when disconnecting plane.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Expose is_rgb_cspace function in hw_sequencer

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: WBSCL filter init calculation fixes

* Previous code did some calculations with a mix of normal integers and
  integers aligned as U2.24 fixed-point values.
* There were bugs in the conversion of the final result into the
  S4.19 values required for the registers.

Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused function prototypes

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix cursor related Pstate hang

Move cursor programming to inside the OTG_MASTER_UPDATE_LOCK

If graphics plane go from 1 pipe to hsplit, the cursor updates
after mpc programming and unlock. Which means there is a window
of time where cursor is enabled on the wrong pipe if it's on
the right side of the screen (i.e. case where cursor need to
move from pipe 0 to pipe 3 post split). This will cause pstate hang.

Solution is to program the cursor while still locked.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set irq state only on existing crtcs

Because AMDGPU_CRTC_IRQ_VLINE1 = 6, it expected 6 more crtcs to be
programed with disabled irq state in amdgpu_irq_disable_all. That caused errors and accessed
the wrong memory location.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Null check for gamma correction.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check hubp in pipe_ctx not in res_pool.

When disable plane, check power gate flag in hubp with pipe_ctx,
not with res_pool.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: sync the VM PD/PT before clearing it

Otherwise we might overwrite stuff which is still in use.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dal 3.1.30

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Bypass gamma set if not standard type

If non-standard gamma type detected set identity matrix flag
so that we can bypass the gamma mode.

Signed-off-by: John Barberiz <jbarberi@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: wait for T9 after backlight off mainlink blank.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix multiple definitions of handle_crc_irq

If CONFIG_DEBUG_FS is disabled, then CRC should also be disabled.
Therefore, amdgpu_dm_crtc_handle_crc_irq was redefined as a no-op
function within amdgpu_dm.h.

However, since amdgpu_dm.h is included in multiple files, this caused
conflicts when linking during compile. Therefore, Use a macro to
define the function as a no-op instead.

Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fixed non-native modes not lighting up

There is no need to call drm_mode_set_crtcinfo() again once
crtc timing is decided. Otherwise non-native/unsupported timing
might get overwritten.

Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove return when no EDID read.

Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: BL setting save/restore

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adding missing TMZ sh/mask entries for DCN1 SURFACE_CONTROL

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <tony.cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clear the shadow fence as well

It also needs to be initialized.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: release the VM shadow in the error path as well

Without it we run into a memory leak.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unused display_vblank_wait interface

No longer used since we changed the MC programming sequence.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/dce: fix mask in dce_v*_0_is_in_vblank

Using the wrong mask.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Noticed-by: Hans de Ruiter <hans@keasigmadelta.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix incompatible structure layouts

Building the amd display driver with link-time optimizations revealed a bug
that caused dal_cmd_tbl_helper_dce80_get_table() and
dal_cmd_tbl_helper_dce110_get_table() get called with an incompatible
return type between the two callers in command_table_helper.c and
command_table_helper2.c:

drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce80/command_table_helper_dce80.h:31: error: type of 'dal_cmd_tbl_helper_dce80_get_table' does not match original declaration [-Werror=lto-type-mismatch]
 const struct command_table_helper *dal_cmd_tbl_helper_dce80_get_table(void);

drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce80/command_table_helper_dce80.c:351: note: 'dal_cmd_tbl_helper_dce80_get_table' was previously declared here
 const struct command_table_helper *dal_cmd_tbl_helper_dce80_get_table(void)

drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce110/command_table_helper_dce110.h:32: error: type of 'dal_cmd_tbl_helper_dce110_get_table' does not match original declaration [-Werror=lto-type-mismatch]
 const struct command_table_helper *dal_cmd_tbl_helper_dce110_get_table(void);

drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce110/command_table_helper_dce110.c:361: note: 'dal_cmd_tbl_helper_dce110_get_table' was previously declared here
 const struct command_table_helper *dal_cmd_tbl_helper_dce110_get_table(void)

The two versions of the structure are obviously derived from the same
one, but have diverged over time, before they got added to the kernel.

This moves the structure to a new shared header file and uses the superset
of the members, to ensure the interfaces are all compatible.

Fixes: ae79c310b1a6 ("drm/amd/display: Add DCE12 bios parser support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cache the fence to wait for a VMID

Beneficial when a lot of processes are waiting for VMIDs.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: restructure amdgpu_vmid_grab

Now that we have the different cases for grabbing a VMID in separate
functions, restructure the top level function to only have one place
where VMIDs are assigned to jobs.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move reusing VMIDs into separate function

Let's try this once more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup and simplify amdgpu_vmid_grab_reserved

Drop the "_locked" from the name, cleanup and simplify the logic a bit.
Add missing comments.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: stop checking GPU reset counter during VMID grab

We do this later on when we flush the VMID anyway.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make VMID owner none atomic v2

The variable is protected by the VMID mutex anyway.

v2: grab the mutex while resetting the VMID as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: split finding idle VMID into separate function

No functional change, but makes it easier to maintain the code.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make VMID assignment more fair v2

Similar to finding an idle one before reuse.

This guarantees fairness between processes. Otherwise process with a reserved
VMID have an unfair advantage while scheduling jobs.

v2: improve commit message

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix always_valid bos multiple LRU insertions.

If these bos are evicted and are in the validated list
things blow up, so do not put them in there. Notably,
that tries to add the bo to the LRU twice, which results
in a BUG_ON in ttm_bo.c.

While for the bo_list an alternative would be to not allow
always valid bos in there, that does not work for the user
fence.

v2: Fixed whitespace issue pointed out by checkpatch.pl

Signed-off-by: Bas Nieuwenhuizen <basni@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Revert "drm/amdgpu/gfx8: Fix compute ring failure after resetting"

This reverts commit 75737cb4eb78c7f185e4700b4aa20cf7a3381aca.

Fixes compute rings test failure on bare metal during full GPU reset.

RCA:
the ring buffer has to be filled with valid packets (such as NOPs) first
before submitting MAP_QUEUEs packet into KIQ. Once a compute engine is mapped,
it will immediately execute the ring buffer if the RTPR is not equal to the
WTPR from the MQD. It could lead to engine hang if the ring buffer filled
with random data.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move waiting for VM flush into gmc_v9_0_emit_flush_gpu_tlb

Keep that at a common place instead of spread over all engines.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement vcn_v1_0_(dec|enc)_ring_emit_reg_wait v2

Add emit_reg_wait implementation for VCN v1.

v2: cleanup the existing code as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement vce_v4_0_emit_reg_wait v2

Add emit_reg_wait implementation for VCE v4.

v2: call new function directly from existing code

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement uvd_v7_0_(enc_|)ring_emit_reg_wait v2

Add emit_reg_wait implementation for UVD v7.

v2: call new function directly from the existing code

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement sdma_v4_0_ring_emit_reg_wait

Add emit_reg_wait implementation for SDMA v4.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement gfx_v9_0_ring_emit_reg_wait

Implement emit_reg_wait for gfx v9.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new emit_reg_wait callback

Allows us to wait for a register value/mask on a ring.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix DW estimation on VI

Forgot to update that during recent changes.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Fix sysfs pp_dpm_pcie bug on CI/VI

when echo "01">pp_dpm_pcie
the pcie dpm will fix in highest link speed.
But user should expect auto speed between
level 0 and level1

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Enable pp_set_power_profile_mode under manual mode

Only user enter manual performance mode, driver allow user
configure the sclk/mclk dpm parameters through sysfs
pp_power_profile_mode.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Refine pp_dpm_force_clock_level functions

Only when user set manual performance mode, driver
enable pp_dpm_force_clock_level.
so check the mode in pp_dpm_force_clock_level,
and delete the same logic in callback functions.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Delete debug info when set power_profile_mode

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: limit the VM address space with older VCE FW versions

Older VCE FW versions are buggy and can't work with 48bit address
spaces.

RFC: Should we limit the address space or just reject loading the older
VCE firmware?

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: Fix trailing semicolon

The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.

Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: amd: Fix trailing semicolons

The trailing semicolon is an empty statement that does no operation.
Removing the two instances of them since they don't do anything.

Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set DRIVER_ATOMIC flag early

The atomic debugfs stuff gets created in drm_dev_alloc()
but this gets called before we've enumerated all of our
IPs, so move the DRIVER_ATOMIC flag setting to fix that.

Since DRIVER_ATOMIC is a driver flag it's currently global
to the driver so setting it affects all GPUs driven by the
driver.  Unfortunately, not all GPUs support atomic.  Warn
the user if that is the case.

This is the same as our current behavior, but at least the
atomic debugfs stuff gets created now.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove DC special casing for KB/ML

It seems to be working now.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=102372
Reviewed-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Simplify ttm_dma_page_put()

Remove redundant store of return code.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Fix coding style in ttm_dma_pool_alloc_new_pages()

Add missing {} braces.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Fix coding style in ttm_tt_swapout()

Add missing {} braces.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Simplify ttm_eu_reserve_buffers()

Hoist the comparison of the ret to -EDEADLK above
the two code paths to simplify the function.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Remove unncessary retval from ttm_bo_vm_fault()

The dual ret/retval was more complex than need be.  Now
we drop the retval variable and assign the appropriate VM
codes to ret instead.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Fix coding style in ttm_bo_move_memcpy()

Add missing {} braces.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Simplify ttm_dma_find_pool() (v2)

Flip the logic of the comparison and remove
the redudant variable for the pool address.

(v2): Remove {} bracing.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Fix coding style in ttm_pool_store()

Correct missing {} style.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Change ttm_tt page allocations to return errors

Explicitly return errors in ttm_tt_alloc_page_directory() and
ttm_dma_tt_alloc_page_directory() instead of relying on
further logic to detect errors.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Add a default BO destructor to simplify code (v2)

(v2): Remove stray ; noticed by Felix

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Fix coding style in ttm_bo.c

Correct indentation and {} brace style.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fill only the lower range with ATS entries v2

At least on x86-64 the upper range is purely used by the kernel,
avoid creating any ATS mappings there as security precaution and to
allow proper page fault reporting in the upper range.

v2: remove unused variable

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: revert "Add support for filling a buffer with 64 bit value"

This reverts commit 7bdc53f925af085ffa0580f10489f82b36cc2f1c and commit
330df03b3abf944f8f5180f2abc61367749984c0.

Neither are needed any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: revert "Add a parameter to amdgpu_bo_create()"

This reverts commit 2046d46db9166bddc84778f0b3477f6d1e9068ea.

Not needed any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop root shadow sync

Completely pointless, it is the same reservation object as the root PD
anyway.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: revert "drm/amdgpu: use AMDGPU_GEM_CREATE_VRAM_CLEARED for VM PD/PTs" v2

Using the standard clear turned out to be to inflexible.

First of all it is executed on the system queue, together with buffer
moves instead on the per VM queue.

And second we need to fill in the page tables with more than just zero.

We keep the new functionality of initializing the PDEs/PTEs with ATC
routing entries intact.

v2: update commit message.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix vcn_v1_0_dec_ring_emit_wreg

That got mixed up with the encode ring function.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: rework the hwmon visibility settings

Previously we just always exposed everything for asics
supported by powerplay.  Make it a bit more fine grained.
In practice this shouldn't change anything.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pp: remove the get_temperature API

This is also supported with the read_sensor API and there
were no more users of the get_temperature API.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: use read_sensor API to get temperature

Rather than using the amdgpu_dpm_get_temperature.  Both
provide access to the temperature.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: report gpu average power via hwmon API

Expose power via hwmon.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: report gpu voltages via hwmon API

Expose vddgfx and vddnb via hwmon.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: handle fan properly when card is powered down

Return an error if the user tried to check or set the fan
parameters while the card is powered down (e.g., on a PX/HG
system for example).  This makes the fan consistent with the
temperature stuff.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move static CSA address to top of address space v2

Move the CSA area to the top of the VA space to avoid clashing with
HMM/ATC in the lower range on GFX9.

v2: wrong sign noticed by Roger, rebase on CSA_VADDR cleanup, handle VA
hole on GFX9 as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Delete unnecessary function argument

in populate_single_graphic_level for smu7

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Add struct profile_mode_setting for smu7

Move configurable profiling parameters to struct
profile_mode_setting and initialize current_profile_setting.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Delete dead code in powerplay

As not support per DPM level optimization,
so delete activity_target array.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Change activity_target for performance optimization on Polaris

And not support perDPM level optimization on Polaris, so
delete sclk activity_target array.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove timer handler.

Dead code, looks obsolete.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unsued mutex and spinlock.

They seem to be obsolete.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix warning about misaligned code

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add temporary delay on disconnect patch

- Sequencing bug of not resetting delay on disconnect to default values

Signed-off-by: John Barberiz <jbarberi@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unnecessary register programming

Remove aux engine register programming,when freeing the engine
as it was a temporary workaround.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add temporary delay on disconnect patch

Signed-off-by: John Barberiz <jbarberi@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix unused variable compilation error

Fix:

drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dce110/dce110_hw_sequencer.c:
In function ‘dce110_blank_stream’:
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dce110/dce110_hw_sequencer.c:1008:31:
error: unused variable ‘params’ [-Werror=unused-variable]
  struct encoder_unblank_param params = { { 0 } };

Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: eDP sequence BL off first then DP blank.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debug flag for p010_mpo_support

Signed-off-by: Geling Li <geling.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Force full update on pixel_format_change

Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dal 3.1.29

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dpms off mute az audio endpoint only.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: revert to hacking bounding box for pipe split

Directly editing pipe config outside of formula is error prone
and results in higher clocks being used when splitting.
For this reason we reverted to using bounding box hacking
to split. Since sometimes this erroneusly results in higher dpm
being required we unhack the bounding box and recalculate to allow
dpm0 is possible.
Side effect is we will lose some stutter efficiency
in non dpm0 cases. This is not a big concern since increased stutter
efficiency saves an order of magnitude less power than lower dpm.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: disable az_clock_gating for endpoint register access only

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Define dpp1_set_cursor_position in header

Signed-off-by: Arun Pandey <Arun.Pandey@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix backlight not off at resume from S4

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add timing generator count to resource pool.

Use tg count in resource pool for further reference.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Synchronize update plane addr for freesync

Lock top_pipe when doing update plane addr for split pipe freesync case

Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>