Rafał Miłecki [Wed, 20 Jul 2016 11:41:42 +0000 (13:41 +0200)]
kernel: update bcma backporting changes up to 4.8
This allows building bcm47xxsflash on ARM.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Wed, 20 Jul 2016 10:58:51 +0000 (12:58 +0200)]
kernel: backport patch for MTD_BCM47XXSFLASH dependency
This is required to update bcma without build breakage. One of bcma
patches changes BCMA_SFLASH dependency.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Felix Fietkau [Wed, 20 Jul 2016 08:09:35 +0000 (10:09 +0200)]
ipq806x: clean up redundant initialization of core device image variables
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 20 Jul 2016 08:09:10 +0000 (10:09 +0200)]
image.mk: initialize BOARD_NAME and IMAGES, add it to DEVICE_VARS
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 20 Jul 2016 06:46:08 +0000 (08:46 +0200)]
image.mk: add support for specifying the VID header offset for UBI
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 15:26:31 +0000 (17:26 +0200)]
cns3xxx: remove obsolete jffs2 image build code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 15:23:44 +0000 (17:23 +0200)]
x86: remove obsolete reference to $(PROFILE)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 15:01:28 +0000 (17:01 +0200)]
config: remove options for including kernel/dtb in rootfs
These options were a big design flaw to begin with
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 15:00:24 +0000 (17:00 +0200)]
mxs: unconditionally install kernel images/dtb files into rootfs (needed by boards)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 14:54:04 +0000 (16:54 +0200)]
kirkwood: remove obsolete code for including kernel/dtb in rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 14:50:55 +0000 (16:50 +0200)]
omap: remove obsolete code for including kernel/dtb in rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 14:42:40 +0000 (16:42 +0200)]
omap: remove obsolete kernel version support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 14:39:46 +0000 (16:39 +0200)]
kirkwood: remove obsolete ubinize.cfg file
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 14:38:25 +0000 (16:38 +0200)]
kirkwood: clean up redundant variables in the image building code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 14:31:27 +0000 (16:31 +0200)]
kirkwood: get rid of useless ubifs/ubi option variables
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 14:01:14 +0000 (16:01 +0200)]
lantiq: convert remaining xway NAND devices to new image build code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 13:36:40 +0000 (15:36 +0200)]
lantiq: convert AVM xrx200 devices to new image build code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 13:26:59 +0000 (15:26 +0200)]
lantiq: convert simple xrx200 devices to new image build code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 13:23:56 +0000 (15:23 +0200)]
lantiq: add image build template for NAND devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 13:07:56 +0000 (15:07 +0200)]
lantiq: simplify image building code
Specifying the device profile in PROFILES is unnecessary, and for all
devices the DEVICE_PROFILE variable matched the device name.
Get rid of this useless variable and set DEVICE_DTS to $(1)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 12:55:43 +0000 (14:55 +0200)]
lantiq: fix building NAND images in default config
Remove remaining references to $(PROFILE)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 11:36:02 +0000 (13:36 +0200)]
build: add support for parameter passing to mkfs from devices
Will be used to support different ubifs parameters per device
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 10:35:27 +0000 (12:35 +0200)]
build: split legacy image mkfs.ubifs command from the one used for the new image building code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 10:38:02 +0000 (12:38 +0200)]
build: split legacy image building code out of image.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 10:21:29 +0000 (12:21 +0200)]
build: make TARGET_ROOTFS_JFFS2 depend on USES_JFFS2
If jffs2 support was not enabled by the target, jffs2 are quite likely
to be broken, so we shouldn't build them.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 10:20:15 +0000 (12:20 +0200)]
lantiq: disable jffs2 support on xrx200
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 09:28:34 +0000 (11:28 +0200)]
image.mk: replace some template abstraction with make pattern rules
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 09:22:35 +0000 (11:22 +0200)]
image.mk: remove obsolete Build/mkfs overrides
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 12:18:02 +0000 (14:18 +0200)]
kernel: remove obsolete patch adding usb_find_device_by_name
ledtrig-usbdev does not need it anymore
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Mon, 18 Jul 2016 15:59:27 +0000 (17:59 +0200)]
ledtrig-usbdev: use upstream function for iterating USB devices
This will allow us to drop LEDE patch adding usb_find_device_by_name.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Jo-Philipp Wich [Tue, 19 Jul 2016 22:13:15 +0000 (00:13 +0200)]
ar71xx: fix default network config of WZR-HP-G300NH and CR3000
The network defaults for the WZR-HP-G300NH and CR3000 models wrongly set the
lan interface to a vlan tagged device while the switch was set up in untagged
mode, leading to broken lan side ethernet connectivity by default.
Fix the issue by emitting untagged interfaces, consistent with the switch
setting on the device.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Zhao Gang [Fri, 15 Jul 2016 10:00:04 +0000 (10:00 +0000)]
ar71xx: add support for gl-ar300m
This add initial support for gl-ar300m router.
Product page: http://www.gl-inet.com/ar300m/
Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
Felix Fietkau [Fri, 8 Jul 2016 16:08:01 +0000 (18:08 +0200)]
ath9k: switch to using mac80211 intermediate software queues
Provides a nice latency reduction under load, due to mac80211's fq_codel
support.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Florian Klink [Mon, 18 Jul 2016 16:53:33 +0000 (18:53 +0200)]
x86/generic: enable CONFIG_SATA_VIA
This enables support for VIA SATA.
Felix Fietkau [Tue, 19 Jul 2016 11:58:54 +0000 (13:58 +0200)]
ubox: update to the latest version, fixes lsmod output
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 19 Jul 2016 10:48:21 +0000 (12:48 +0200)]
uboot-oxnas: fix build error on non-linux systems
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle [Mon, 18 Jul 2016 22:30:27 +0000 (00:30 +0200)]
kernel: backport cosmetic UBIFS patches to kernel 4.1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 18 Jul 2016 22:27:59 +0000 (00:27 +0200)]
kernel: backport yet another cosmetic ubifs patch
On UBI-enabled devices using squashfs as their rootfs an error
message like
UBIFS error (ubi0:3 pid 1): init_constants_early: too few LEBs (12), min. is 17
was thrown while probe-mounting the rootfs which later on succeeds and
thus shouldn't alert the user.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hauke Mehrtens [Mon, 18 Jul 2016 21:12:08 +0000 (23:12 +0200)]
strace: update to version 1.12
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Daniel Golle [Mon, 18 Jul 2016 18:05:15 +0000 (20:05 +0200)]
oxnas: add kmod-ledtrig-timer to default package set
It is needed for preinit/failsafe indications to work.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 18 Jul 2016 17:37:43 +0000 (19:37 +0200)]
oxnas: use DHCP by default on ethernet interface (lan)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 18 Jul 2016 16:59:53 +0000 (18:59 +0200)]
oxnas: sync kernel config-4.1 with changes made to config-4.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 18 Jul 2016 16:45:03 +0000 (18:45 +0200)]
oxnas: add DTB for Akitio devices in patches-4.1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 18 Jul 2016 16:32:48 +0000 (18:32 +0200)]
oxnas: revert to kernel 4.1
A bug resulting in the NAND not being detected by newer kernels has
kept me sleepless for months and yet I wasn't able to discover the
cause.
Bring back patches and files for 4.1 until this has been resolved.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Mon, 18 Jul 2016 10:32:10 +0000 (12:32 +0200)]
samba36: disable local browse master by default
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 18 Jul 2016 11:36:24 +0000 (13:36 +0200)]
hostapd: fix VLAN support in full wpad builds
Suppress -DCONFIG_NO_VLAN if CONFIG_IBSS_RSN is enabled
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Josh Bendavid [Wed, 13 Jul 2016 09:20:37 +0000 (11:20 +0200)]
ipq806x: add patch for kernel compiler flags
Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
Josh Bendavid [Wed, 13 Jul 2016 09:20:19 +0000 (11:20 +0200)]
ipq806x: change compiler flags to arm cortex-a15
Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
Felix Fietkau [Sun, 17 Jul 2016 14:57:53 +0000 (16:57 +0200)]
feeds.conf: disable the targets feed by default
It is not actively maintained anyway
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 17 Jul 2016 10:52:42 +0000 (12:52 +0200)]
ath10k: fix stack traces from a-msdu rx reporting issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jonas Gorski [Sat, 16 Jul 2016 14:57:05 +0000 (16:57 +0200)]
scripts/getver.sh: fix older git versions from printing stuff to stdout
Older git versions seem output the original argument to stdout if there
is no upstream, presumably because they try to do things with it
internally. This can be prevented by passing --verify to it, which
should be safe on newer git versions.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jo-Philipp Wich [Sat, 16 Jul 2016 11:59:06 +0000 (13:59 +0200)]
ramips: mt7621: add missing kernel symbol
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Stephen Walker [Thu, 7 Jul 2016 00:23:15 +0000 (20:23 -0400)]
ar71xx: add software transmit timestamp support
Add software transmit timestamp and ethtool (-T) timestamp support
Signed-off-by: Stephen Walker <stephendwalker+github@gmail.com>
Felix Fietkau [Mon, 11 Jul 2016 09:38:15 +0000 (11:38 +0200)]
ath9k: implement temperature compensation support for AR93xx and newer
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 9 Jul 2016 13:31:35 +0000 (15:31 +0200)]
ath9k: use external reset on AR91xx and QCA955x to improve stability
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 9 Jul 2016 14:12:46 +0000 (16:12 +0200)]
ar71xx: define wmac reset function for QCA955x
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 11:51:49 +0000 (13:51 +0200)]
image.mk: fix append-dtb race when multiple devices use the same .dts
Call Image/BuildDTB unconditionally to keep things consistent
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 11:02:48 +0000 (13:02 +0200)]
uclibc++: fix build with gcc 6.1.0, which defaults to using C++14 ABI
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Syrone Wong [Wed, 13 Jul 2016 13:57:05 +0000 (21:57 +0800)]
toolchain/gcc: add 6.1.0
-fno-plt and musl-libc patches already get upstream, then dropped
in GCC 6. Other patches are almost identical compared to GCC 5.4.
Compile and run tested on ar71xx/Qihoo C301 and
mvebu/Linksys WRT1900ac v1
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanups/fixes]
Felix Fietkau [Thu, 14 Jul 2016 10:08:03 +0000 (12:08 +0200)]
toolchain: get rid of GCC_VERSION_5 config symbol
Replace it with !GCC_VERSION_4_8 to be more future compatible
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 10:06:39 +0000 (12:06 +0200)]
toolchain/gcc: clean up remaining references to the old linaro version
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 09:51:10 +0000 (11:51 +0200)]
toolchain/gdb: update to version 7.11.1
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 09:47:36 +0000 (11:47 +0200)]
toolchain/gdb: reorganize patch layout
Use ./patches and ./patches-arc instead of version dependent patches.
We should have only one main supported version (along with the special
case for arc).
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Syrone Wong [Wed, 13 Jul 2016 13:57:02 +0000 (21:57 +0800)]
toolchain/binutils: add 2.26.1
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [fixes/cleanup]
Syrone Wong [Wed, 13 Jul 2016 13:57:01 +0000 (21:57 +0800)]
tools/isl: bump to 0.17.1
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
Felix Fietkau [Mon, 11 Jul 2016 08:38:21 +0000 (10:38 +0200)]
ath9k: fix spectral scan on AR9285 and newer AR92xx chipsets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 11 Jul 2016 08:38:01 +0000 (10:38 +0200)]
ath9k: merge a fix for the minimum CCA threshold on 5 GHz
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 13:43:49 +0000 (15:43 +0200)]
target.mk: change CPU_CFLAGS to better suit target CPUs
-march forces the compiler to generate generic code, whereas -mcpu
allows it to target the specific CPU variant and use instructions that
the generic architecture may not have
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 13:41:22 +0000 (15:41 +0200)]
target.mk: rework arm architecture level detection
Use kernel config as input instead of -march CFLAGS.
With this change, -march can be dropped and replaced with more specific
optimization flags for better code generation.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 11:58:23 +0000 (13:58 +0200)]
image.mk: clean up redundant code related to DEVICE_DTS
It is used by a core build template, so the variable should be
initialized and added to DEVICE_VARS in the core.
Same for DEVICE_DTS_DIR
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 11:30:54 +0000 (13:30 +0200)]
scripts/getver.sh: stop relying on the reboot tag
It may not be present when cloning a staging tree or another fork
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 14 Jul 2016 11:31:53 +0000 (13:31 +0200)]
mac80211: fix a harmless uninitialized variable warning
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ben Greear [Wed, 13 Jul 2016 15:16:26 +0000 (08:16 -0700)]
add ath10k-ct: Candela-Tech ath10k out-of-tree driver.
This lets one use the CT ath10k driver instead of the built-in
ath10k driver from the upstream kernel (or backports).
This should be a drop-in replacement, as well as enabling
better CT firmware support.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Rafał Miłecki [Thu, 14 Jul 2016 09:31:26 +0000 (11:31 +0200)]
bcm53xx: image: don't suppress "mv" command echoing
We call all commands normally, with standard echoing. It's useful for
debugging with V=s. Don't make lzma compression an exception, it's a bit
confusing this way.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Felix Fietkau [Fri, 8 Jul 2016 12:22:29 +0000 (14:22 +0200)]
bcm53xx: simplify image building code
Use append-ubi template for ubinize, remove mkfs override
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 8 Jul 2016 12:16:16 +0000 (14:16 +0200)]
bcm53xx: remove duplicate template data from the image makefile
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 13 Jul 2016 15:23:00 +0000 (17:23 +0200)]
image: allow devices to override the -E 5 ubinize option
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 13 Jul 2016 15:19:00 +0000 (17:19 +0200)]
image: clean up UBI related device variable definitions
Move UBI related variable export to core, since the variables are used
by a core Build/ template
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 13 Jul 2016 15:11:08 +0000 (17:11 +0200)]
ipq806x: remove obsolete UBINIZE_OPTS variables
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hauke Mehrtens [Thu, 14 Jul 2016 07:15:29 +0000 (09:15 +0200)]
mbedtls: fix missing mbedtls_time_t bug in mbedtls 2.3.0
This backports a commit from mbedtls current git which adds missing
include for platform.h.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Jul 2016 10:35:18 +0000 (12:35 +0200)]
musl: remove sh3 workaround
The GCC bug 67260 is fixed upstream now, remove this workaround.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Jul 2016 10:24:34 +0000 (12:24 +0200)]
musl: update musl to version 1.1.15
The removed patch is already integrated in upstream musl.
Add one additional patch which fixes a regression on mips.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Jul 2016 10:19:42 +0000 (12:19 +0200)]
gcc: update gcc to version 5.4.0
The removed patches are already integrated in upstream gcc.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Jul 2016 15:45:15 +0000 (17:45 +0200)]
mbedtls: update to version 2.3.0
This fixes 3 minor security problems.
SSLv3 is deactivated by default now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Jul 2016 15:44:26 +0000 (17:44 +0200)]
polarssl: update to version 1.3.17
This fixes 3 minor security problems.
SSLv3 is deactivated by default now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Álvaro Fernández Rojas [Wed, 13 Jul 2016 17:13:49 +0000 (19:13 +0200)]
dosfstools: fix build on OS X
- avoid using tools/include/endian.h on OS X to fix compilation.
- remove unneeded Host/Compile definition.
- refresh patches.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Piotr Dymacz [Fri, 8 Jul 2016 13:19:46 +0000 (15:19 +0200)]
uboot-envtools: add support for jjPlus JWAP230
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Piotr Dymacz [Fri, 8 Jul 2016 13:03:00 +0000 (15:03 +0200)]
ar71xx: add support for jjPlus JWAP230
jjPlus JWAP230 is based on Qualcomm Atheros QCA9558 + QCA8337.
Short specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 2x 10/100/1000 Mbps Ethernet
- 128 MB of RAM (DDR2)
- 16 MB of FLASH
- 3T3R 2.4 GHz with external PA (SST12LP15A), up to 28 dBm
- 3x MMCX connectors
- power input: 802.3at PoE or wide range DC (36-57 V)
- optional 802.3af PSE
- 1x mini-PCIe connector with PCIe, USB buses and SIM slot
- 1x mini-PCIe connector with PCIe bus
- 1x USB type-A connector
- 6x LED, 1x button (hardware reset)
- RS232 (MAX3223) and (E)JTAG headers
Default configuration:
- WAN on eth1 (RJ45 near LEDs with PoE input)
- LAN on eth0 (RJ45 near DC jack)
- left top LED set to be status LED
- all LEDs configurable form user space
Flash instruction (do it under U-Boot, using RS232):
1. tftp 0x80060000 lede-ar71xx-generic-jwap230-squashfs-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000"
5. saveenv && reset
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Piotr Dymacz [Fri, 8 Jul 2016 11:11:42 +0000 (13:11 +0200)]
kernel/mtd: add support for EON EN25Q128
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Piotr Dymacz [Sun, 19 Jun 2016 21:37:37 +0000 (23:37 +0200)]
uboot-envtools: add support for Wallys DR531
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Piotr Dymacz [Thu, 16 Jun 2016 16:08:03 +0000 (18:08 +0200)]
ar71xx: add support for Wallys DR531
Wallys DR531 is based on Qualcomm Atheros QCA9531 v2.
Short specification:
- 550/400/200 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet
- 64 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz with external PA (SE2576L), up to 30 dBm
- 2x MMCX connectors
- mini-PCIe connector with PCIe/USB buses and SIM slot
- 7x LED, 1x button, 1x optional buzzer
- UART, (E)JTAG and LED headers
Default configuration:
- WAN on eth1 (RJ45 near DC jack)
- LAN on eth0 (RJ45 near button)
- S4 LED set to be status LED
- all LEDs configurable form user space
- button configured for reset
Flash instruction (do it under U-Boot, using UART):
1. tftp 0x80060000 lede-ar71xx-generic-dr531-squashfs-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000"
5. saveenv && reset
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Daniel Dickinson [Thu, 7 Jul 2016 10:45:36 +0000 (06:45 -0400)]
sdk: Allow to configure signed pacakge lists
Add option to enable signing packages lists in SDK.
Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
Felix Fietkau [Wed, 13 Jul 2016 16:34:52 +0000 (18:34 +0200)]
ar71xx: fix build error when initramfs is disabled
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jonas Gorski [Wed, 13 Jul 2016 14:56:41 +0000 (16:56 +0200)]
scripts/getver.sh: fix one more wc -l call
The revision to hash conversion was missed when fixing up the script.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Sat, 25 Jun 2016 13:58:35 +0000 (15:58 +0200)]
scripts/getver.sh: try to get branch/upstream automatically
Instead of assuming master is the current branch and origin the right
upstream, try to get both dynamically. If the current branch is not
tracking any upstream, use the origin of the master branch.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Hauke Mehrtens [Wed, 13 Jul 2016 10:07:08 +0000 (12:07 +0200)]
kernel: update kernel 4.4 to version 4.4.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Wed, 13 Jul 2016 11:50:03 +0000 (13:50 +0200)]
ar71xx: fix a legacy image porting issue
Get rid of remaining IMAGE_PROFILE references and move template calls
the right place
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lucian Cristian [Mon, 11 Jul 2016 23:00:16 +0000 (02:00 +0300)]
x64: add legacy IDE, fix VirtualBox bug #84 and Fujitsu Futro S550-2
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Felix Fietkau [Tue, 12 Jul 2016 10:32:54 +0000 (12:32 +0200)]
mac80211: disable fq until performance issues have been found and fixed
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hans Dedecker [Tue, 12 Jul 2016 12:23:58 +0000 (14:23 +0200)]
netifd: quote vendorid and hostname variables in dhcp script
Quote hostname and vendorid variables in dhcp script so they can
hold strings having white spaces
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
projects / openwrt / staging / blocktrron.git / log