staging: comedi: range: introduce range_unipolar2_5

Introduce a simple unipolar 0 to 2.5 range, range_unipolar2_5, for
use by the comedi drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt9812: use comedi provided range_bipolar10

Remove the private ranges, dt9812_10_a{in,out}_range, in this driver
and use the comedi provided range_bipolar10 instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das800: use comedi provided range_bipolar5

Remove the private range, range_das800_ai, in this driver and use
the comedi provided range_bipolar5 instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: use comedi provided range_bipolar10

Remove the private range, range_ao_1, in this driver and use the
comedi provided range_bipolar10 instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas64: use comedi provided range_bipolar10

Remove the private range, ao_ranges_60xx, in this driver and use
the comedi provided range_bipolar10 instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: rename thisboard variable

For aesthetic reasons. rename the local variable 'thisboard' to 'board'
throughout the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: rename CamelCase chanBipolar

Rename the CamelCase private data variable chanBipolar to chan_is_bipolar.
Remove the unnecessary comment about it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: rename CamelCase in rtdConvertChanGain()

Rename the CamelCase function rtdConvertChanGain() as well as the
CamelCase parameters to the function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: rename CamelCase rtdBoard

Rename the CamelCase struct rtdBoard to rtd_boardinfo. Also, rename the
range10Start and rangeUniStart variables in the struct to range_bip10
and range_uni10.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: rename CamelCase aiCount

Rename this private data variable to ai_count.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: rename CamelCase in rtd_interrupt()

Rename the CamelCase local variable fifoStatus to fifo_status.

Also rename the goto lables abortTransfer and transferDone to
xfer_abort and xfer_done.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: rename CamelCase fifoLen

Rename this private data variable to fifosz.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: rename CamelCase transCount

Rename this private data variable to xfer_count.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: rename CamelCase aoValue

Rename this private data variable to ao_readback and remove the
unnecessary comments.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: rename CamelCase rtdPrivate

Rename the private data struct to rtd_private.

Also, remove the unnecessary comment about it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: cleanup rtd_dio_insn_config()

Add a local variable to make this function a bit cleaner and
remove the unnecessary comments.

The comedi core expects this function to return the number of
data parameters used. Change the return from '1' to 'insn->n'
to make this more apparent.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zcache: clean TODO list

Cleanup TODO list since support zero-filled pages more efficiently has
already done by this patchset.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zcache: introduce zero-filled page stat count

Introduce zero-filled page statistics to monitor the number of
zero-filled pages.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zcache: fix static variables defined in debug.h but used in mutiple C files

After commit 95bdaee214 ("zcache: Move debugfs code out of zcache-main.c file")
be merged, most of knods in zcache debugfs just export zero since these variables
are defined in debug.h but are in use in multiple C files zcache-main.c and debug.c,
in this case variables can't be treated as shared variables.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: imx-drm: Make IPU KMS parse display-timings

This patch adds support for parsing of the DT display-timings prop
to IPU KMS driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zcache: fix zcache writeback in debugfs

commit 9c0ad59ef ("zcache/debug: Use an array to initialize/use debugfs attributes")
use an array to initialize/use debugfs attributes, .name = #x, .val = &zcache_##x.
For zcache writeback, this commit set .name = zcache_outstanding_writeback_pages and
.name = zcache_writtenback_pages seperately, however, corresponding .val =
&zcache_zcache_outstanding_writeback_pages and .val = &zcache_zcache_writtenback_pages,
which are not correct.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zcache: fix pers_pageframes|_max aren't exported in debugfs

Before commit 9c0ad59ef ("zcache/debug: Use an array to initialize/use
debugfs attributes"), pers_pageframes|_max are exported in debugfs, but
this commit forgot use array export pers_pageframes|_max. This patch add
pers_pageframes|_max back.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zcache: handle zcache_[eph|pers]_zpages for zero-filled page

Increment/decrement zcache_[eph|pers]_zpages for zero-filled pages,
the main point of the counters for zpages and pageframes is to be
able to calculate density == zpages/pageframes. A zero-filled page
becomes a zpage that "compresses" to zero bytes and, as a result,
requires zero pageframes for storage. So the zpages counter should
be increased but the pageframes counter should not.

[Dan Magenheimer <dan.magenheimer@oracle.com>: patch description]
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zcache: zero-filled pages awareness

Compression of zero-filled pages can unneccessarily cause internal
fragmentation, and thus waste memory. This special case can be
optimized.

This patch captures zero-filled pages, and marks their corresponding
zcache backing page entry as zero-filled. Whenever such zero-filled
page is retrieved, we fill the page frame with zero.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zcache: introduce zero-filled pages handler

Introduce zero-filled pages handler to capture and handle zero pages.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: zcache: fix compile warning

Fix below compile warning:
staging/zcache/zcache-main.c: In function ‘zcache_autocreate_pool’:
staging/zcache/zcache-main.c:1393:13: warning: ‘cli’ may be used uninitialized
in this function [-Wuninitialized]

Signed-off-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: zcache: fix compile error

Because 'ramster_debugfs_init' is not defined if !CONFIG_DEBUG_FS, there is
compile error:

$ make drivers/staging/zcache/
staging/zcache/ramster/ramster.c: In function ‘ramster_init’:
staging/zcache/ramster/ramster.c:981:2: error: implicit declaration of
function ‘ramster_debugfs_init’ [-Werror=implicit-function-declaration]

This patch fix it and reduce some #ifdef CONFIG_DEBUG_FS in .c files the same
way.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-3.10c' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:
Third round of IIO cleanups, graduations and new stuff for the 3.10 cycle.

A small set including 3 things.
1) A short cleanup series for the ak8975.
2) Graduation of ak8975 out of staging.
3) Some additional bits for the at91 adc driver to cover low resolution
   modes, sleep and a little bit of missing documentation.

iio: at91_adc: fix missing Sample and Hold time

On the at91_adc a minimal Sample and Hold Time is necessary for the ADC to
guarantee the best converted final value between two channels selection.
This time has to be programmed through the bitfield SHTIM in the
Mode Register ADC_MR.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: at91_adc: add sleep mode support

The sleep mode will allow to put the adc in sleep between conversion.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: at91_adc: add low and high res support

at91 adc offers the choice between two resolutions: low and high.
The low and high resolution values depends on adc IP version, as many IP
properties have been exposed through device tree, these settings have also
been added to the dt bindings.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio:magnetometer:ak8975 move driver out of staging

Issues raised in last series to propose this have now been resolved
so there should be no reason this driver cannot graduate from staging.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>

staging:iio:magnetometer:ak8975 use standard i2c_smbus read functions.

Now the mysterious NOSTART flag is gone from the read, we can use the
i2c_smbus_read_byte/word/i2c_block_data functions instead of the
local reimplementation of these standard functions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>

staging:iio:magnetometer:ak8975 drop I2C_M_NOSTART flag in read_data

This flag makes no sense whatsoever where it is.
Documentation/i2c/i2c-protocol states:

  If you set the I2C_M_NOSTART variable for the first partial message,
  we do not generate Addr, but we do generate the startbit S. This will
  probably confuse all other clients on your bus, so don't try this.

This is exactly what is going on here.  Likelihood given that the
driver never checked for this protocol mangling being available is that
it wasn't present on the test boards and hence this flag was simply
ignored.  No indication of why it would be necessary has been found in
the datasheets.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>

staging:iio:magnetometer:ak8975 drop unused eoc_irq

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>

staging: ti-soc-thermal: Add get_trend support

Patch adds get_trend functionality for OMAP Bandgap thermal devices.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ti-soc-thermal:Introduce ti_bandgap_get_trend function for OMAP5

The patch adds ti_bandgap_get_trend function. This is specific
to OMAP5 for now it computes the trend from the temp values stored
in the hardware history buffer.

Formula: (T1 - T2) / P.

Where:
                T1: Last read valid temperature.
                T2: Last but one read valid temperature.
                P:  Update Interval.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ti-soc-thermal: Enable HISTORY_BUFFER Feature for OMAP5

This patch enables the HISTORY_BUFFER eature for OMAP5.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ti-soc-thermal: Introduce HAS_HISTORY_BUFFER feature for bandgap

The patch introduces HISTORY_BUFFER feature. This is present in OMAP5 bandgap
and it is a hardware history buffer of previously read temperatures.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ti-soc-thermal: Modify update_interval r/w functions to incorporate the OMAP5 feature of COUNTER_DELAY.

Update ti_bandgap_write_update_interval and ti_bandgap_read_update_interval
functions to incorporate the OMAP5 feature of COUNTER_DELAY. The way we
program the delay between two successive temperature conversions
is different for OMAP5 as when compared with OMAP4. Incorporating
the changes required to program the delay for OMAP5.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ti-soc-thermal: Enable COUNTER_DELAY feature for OMAP5

Enable COUNTER_DELAY feature for OMAP5.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ti-soc-thermal: Introduce HAS_COUNTER_DELAY feature for bandgap

Introduce HAS_COUNTER_DELAY feature for bandgap.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ti-soc-thermal: Initialise counter_delay field for OMAP5 sensors

Initialize all 3 temperature sensors of OMAP5 bandgap with the counter delay
mask.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ti-soc-thermal: Add counter_delay_mask field to temp_sensor_registers struct

Add counter_delay_mask field to temp_sensor_registers structure.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ti-soc-thermal: report alert events on OMAP5 devices

OMAP5430 devices have the capability to generate
alert temperature. Thus, whenever a T_ALERT IRQ is served,
the ti-bandgap will call .report_temperature to notify the
thermal framework about thermal zone update request.

This patch allows OMAP5430 devices to notify
the thermal framework about T_ALERT events.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ti-soc-thermal: report alert events on OMAP4 devices

OMAP4460 and OMAP4470 devices have the capability to generate
alert temperature. Thus, whenever a T_ALERT IRQ is served,
the ti-bandgap will call .report_temperature to notify the
thermal framework about thermal zone update request.

This patch allows OMAP4460 and OMAP4470 devices to notify
the thermal framework about T_ALERT events.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ti-soc-thermal: expose ti_thermal_report_temperature

Whenever a sensor has an alert to be reported to the thermal framework,
it can use the report ti_thermal_report_temperature helper. This patch
expose this function so that bandgap data config declarations could use it.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ti-soc-thermal: remove kernel-doc warnings reported with -v

Fix all kernel-doc warnings by add documentation about returns.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ti-soc-thermal: return error in case power switch is not supported

Improve ti_bandgap_power by returning an error code in case
the device does not support controlling its power state.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5139: device_reset() can be static

Function device_reset() is only used in rts51x_scsi.c, so make it be
static.  Otherwise, it will have a name collision with the new added
reset API.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:csr: Fix typos in comment and printk

Correct spelling typo in comments and printks.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 3.9-rc5 into staging-next

This pulls in all of the good fixes we need here.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.9-rc5

Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine fixes from Vinod Koul:
 "Two fixes for slave-dmaengine.

  The first one is for making slave_id value correct for dw_dmac and
  the other one fixes the endieness in DT parsing"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dw_dmac: adjust slave_id accordingly to request line base
  dmaengine: dw_dma: fix endianess for DT xlate function

Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
 "For a some fixes for Kernel 3.9:
   - subsystem build fix when VIDEO_DEV=y, VIDEO_V4L2=m and I2C=m
   - compilation fix for arm multiarch preventing IR_RX51 to be selected
   - regression fix at bttv crop logic
   - s5p-mfc/m5mols/exynos: a few fixes for cameras on exynos hardware"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] [REGRESSION] bt8xx: Fix too large height in cropcap
  [media] fix compilation with both V4L2 and I2C as 'm'
  [media] m5mols: Fix bug in stream on handler
  [media] s5p-fimc: Do not attempt to disable not enabled media pipeline
  [media] s5p-mfc: Fix encoder control 15 issue
  [media] s5p-mfc: Fix frame skip bug
  [media] s5p-fimc: send valid m2m ctx to fimc_m2m_job_finish
  [media] exynos-gsc: send valid m2m ctx to gsc_m2m_job_finish
  [media] fimc-lite: Fix the variable type to avoid possible crash
  [media] fimc-lite: Initialize 'step' field in fimc_lite_ctrl structure
  [media] ir: IR_RX51 only works on OMAP2

Merge tag 'for-linus-20130331' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "Alright, this time from 10K up in the air.

  Collection of fixes that have been queued up since the merge window
  opened, hence postponed until later in the cycle.  The pull request
  contains:

   - A bunch of fixes for the xen blk front/back driver.

   - A round of fixes for the new IBM RamSan driver, fixing various
     nasty issues.

   - Fixes for multiple drives from Wei Yongjun, bad handling of return
     values and wrong pointer math.

   - A fix for loop properly killing partitions when being detached."

* tag 'for-linus-20130331' of git://git.kernel.dk/linux-block: (25 commits)
  mg_disk: fix error return code in mg_probe()
  rsxx: remove unused variable
  rsxx: enable error return of rsxx_eeh_save_issued_dmas()
  block: removes dynamic allocation on stack
  Block: blk-flush: Fixed indent code style
  cciss: fix invalid use of sizeof in cciss_find_cfgtables()
  loop: cleanup partitions when detaching loop device
  loop: fix error return code in loop_add()
  mtip32xx: fix error return code in mtip_pci_probe()
  xen-blkfront: remove frame list from blk_shadow
  xen-blkfront: pre-allocate pages for requests
  xen-blkback: don't store dev_bus_addr
  xen-blkfront: switch from llist to list
  xen-blkback: fix foreach_grant_safe to handle empty lists
  xen-blkfront: replace kmalloc and then memcpy with kmemdup
  xen-blkback: fix dispatch_rw_block_io() error path
  rsxx: fix missing unlock on error return in rsxx_eeh_remap_dmas()
  Adding in EEH support to the IBM FlashSystem 70/80 device driver
  block: IBM RamSan 70/80 error message bug fix.
  block: IBM RamSan 70/80 branding changes.
  ...

Revert "lockdep: check that no locks held at freeze time"

This reverts commit 6aa9707099c4b25700940eb3d016f16c4434360d.

Commit 6aa9707099c4 ("lockdep: check that no locks held at freeze time")
causes problems with NFS root filesystems.  The failures were noticed on
OMAP2 and 3 boards during kernel init:

  [ BUG: swapper/0/1 still has locks held! ]
  3.9.0-rc3-00344-ga937536 #1 Not tainted
  -------------------------------------
  1 lock held by swapper/0/1:
   #0:  (&type->s_umount_key#13/1){+.+.+.}, at: [<c011e84c>] sget+0x248/0x574

  stack backtrace:
    rpc_wait_bit_killable
    __wait_on_bit
    out_of_line_wait_on_bit
    __rpc_execute
    rpc_run_task
    rpc_call_sync
    nfs_proc_get_root
    nfs_get_root
    nfs_fs_mount_common
    nfs_try_mount
    nfs_fs_mount
    mount_fs
    vfs_kern_mount
    do_mount
    sys_mount
    do_mount_root
    mount_root
    prepare_namespace
    kernel_init_freeable
    kernel_init

Although the rootfs mounts, the system is unstable.  Here's a transcript
from a PM test:

  http://www.pwsan.com/omap/testlogs/test_v3.9-rc3/20130317194234/pm/37xxevm/37xxevm_log.txt

Here's what the test log should look like:

  http://www.pwsan.com/omap/testlogs/test_v3.8/20130218214403/pm/37xxevm/37xxevm_log.txt

Mailing list discussion is here:

  http://lkml.org/lkml/2013/3/4/221

Deal with this for v3.9 by reverting the problem commit, until folks can
figure out the right long-term course of action.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: <maciej.rutecki@gmail.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ben Chan <benchan@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git./linux/kernel/git/nab/target-pending

Pull SCSI target fixes from Nicholas Bellinger:
 "This includes the bug-fix for a >= v3.8-rc1 regression specific to
  iscsi-target persistent reservation conflict handling (CC'ed to
  stable), and a tcm_vhost patch to drop VIRTIO_RING_F_EVENT_IDX usage
  so that in-flight qemu vhost-scsi-pci device code can detect the
  proper vhost feature bits.

  Also, there are two more tcm_vhost patches still being discussed by
  MST and Asias for v3.9 that will be required for the in-flight qemu
  vhost-scsi-pci device patch to function properly, and that should
  (hopefully) be the last target fixes for this round."

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Fix RESERVATION_CONFLICT status regression for iscsi-target special case
  tcm_vhost: Avoid VIRTIO_RING_F_EVENT_IDX feature bit

dw_dmac: adjust slave_id accordingly to request line base

On some hardware configurations we have got the request line with the offset.
The patch introduces convert_slave_id() helper for that cases. The request line
base is came from the driver data provided by the platform_device_id table.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

dmaengine: dw_dma: fix endianess for DT xlate function

As reported by Wu Fengguang's build robot tracking sparse warnings, the
dma_spec arguments in the dw_dma_xlate are already byte swapped on
little-endian platforms and must not get swapped again. This code is
currently not used anywhere, but will be used in Linux 3.10 when the
ARM SPEAr platform starts using the generic DMA DT binding.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

PNP: List Rafael Wysocki as a maintainer

The Adam Belay's e-mail address in MAINTAINERS under PNP SUPPORT
is not valid any more and I started to maintain that code in the
meantime as a matter of fact, so list myself as a maintainer of it
along with Bjorn and remove the Adam's entry from it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

staging: sync: Add compat_ioctl handlers to sync drivers

The sync drivers are missing compat_ioctl handlers, so this
patch adds them.

The same change has been submitted to AOSP:
        https://android-review.googlesource.com/#/c/54901/
        Change-Id: If1a1ecc3952b321c8d64c6a8b050104859efc4b1

Cc: Erik Gilling <konkers@android.com>
Cc: Dmitry Pervushin <dmitry.pervushin@linaro.org>
Cc: Bernhard Rosenkränzer <Bernhard.Rosenkranzer@linaro.org>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Dmitry Pervushin <dmitry.pervushin@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

Pull ceph fix from Sage Weil:
 "This fixes a regression introduced during the last merge window when
  mapping non-existent images."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: don't zero-fill non-image object requests

rbd: don't zero-fill non-image object requests

A result of ENOENT from a read request for an object that's part of
an rbd image indicates that there is a hole in that portion of the
image.  Similarly, a short read for such an object indicates that
the remainder of the read should be interpreted a full read with
zeros filling out the end of the request.

This behavior is not correct for objects that are not backing rbd
image data.  Currently rbd_img_obj_request_callback() assumes it
should be done for all objects.

Change rbd_img_obj_request_callback() so it only does this zeroing
for image objects.  Encapsulate that special handling in its own
function.  Add an assertion that the image object request is a bio
request, since we assume that (and we currently don't support any
other types).

This resolves a problem identified here:
    http://tracker.ceph.com/issues/4559

The regression was introduced by bf0d5f503dc11d6314c0503591d258d60ee9c944.

Reported-by: Dan van der Ster <dan@vanderster.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-off-by: Sage Weil <sage@inktank.com>

Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "We've had a busy two weeks of bug fixing.  The biggest patches in here
  are some long standing early-enospc problems (Josef) and a very old
  race where compression and mmap combine forces to lose writes (me).
  I'm fairly sure the mmap bug goes all the way back to the introduction
  of the compression code, which is proof that fsx doesn't trigger every
  possible mmap corner after all.

  I'm sure you'll notice one of these is from this morning, it's a small
  and isolated use-after-free fix in our scrub error reporting.  I
  double checked it here."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: don't drop path when printing out tree errors in scrub
  Btrfs: fix wrong return value of btrfs_lookup_csum()
  Btrfs: fix wrong reservation of csums
  Btrfs: fix double free in the btrfs_qgroup_account_ref()
  Btrfs: limit the global reserve to 512mb
  Btrfs: hold the ordered operations mutex when waiting on ordered extents
  Btrfs: fix space accounting for unlink and rename
  Btrfs: fix space leak when we fail to reserve metadata space
  Btrfs: fix EIO from btrfs send in is_extent_unchanged for punched holes
  Btrfs: fix race between mmap writes and compression
  Btrfs: fix memory leak in btrfs_create_tree()
  Btrfs: fix locking on ROOT_REPLACE operations in tree mod log
  Btrfs: fix missing qgroup reservation before fallocating
  Btrfs: handle a bogus chunk tree nicely
  Btrfs: update to use fs_state bit

ia64 idle: delete stale (*idle)() function pointer

Commit 3e7fc708eb41 ("ia64 idle: delete pm_idle") in 3.9-rc1 didn't
finish the job, leaving an un-initialized reference to (*idle)().

[ Haven't seen a crash from this - but seems like we are just being
  lucky that "idle" is zero so it does get initialized before we jump to
  randomland  - Len ]

Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-curr' of git://git./linux/kernel/git/vgupta/arc

Pull arc architecture fixes from Vineet Gupta:
 "This includes fix for a serious bug in DMA mapping API, make
  allyesconfig wreckage, removal of bogus email-list placeholder in
  MAINTAINERS, a typo in ptrace helper code and last remaining changes
  for syscall ABI v3 which we are finally starting to transition-to
  internally.

  The request is late than I intended to - but I was held up with
  debugging a timer link list corruption, for which a proposed fix to
  generic timer code was sent out to lkml/tglx earlier today."

* 'for-curr' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: Fix the typo in event identifier flags used by ptrace
  arc: fix dma_address assignment during dma_map_sg()
  ARC: Remove SET_PERSONALITY (tracks cross-arch change)
  ARC: ABIv3: fork/vfork wrappers not needed in "no-legacy-syscall" ABI
  ARC: ABIv3: Print the correct ABI ver
  ARC: make allyesconfig build breakages
  ARC: MAINTAINERS update for ARC

staging: speakup: use native error codes

The mapping as follows:
E_RANGE -> ERANGE
E_UNDEF -> ENODATA
E_TOOLONG -> E2BIG
SET_DEFAULT -> ERESTART

As a side effect it fixes a bug in spk_var_store() where return code was
mistakenly compared to negative value instead of positive.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: reuse native kernel functions

We have simple_strtoul and simple_strtol. Don't repeat their functionality
here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-3.10b' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second round of IIO cleanups for the 3.10 cycle

1) A nice little removal of the unwanted private pointer from
   struct iio_trigger.
2) Some clean up of the ad799x driver.
3) Couple of cleanups for the exynos_adc driver and some documentation.
4) Move the mxs-lradc initialization a little earlier in the driver to avoid
   wiping out the configuration just after setting it.

A nice small set of worthy bits and bobs.

Btrfs: don't drop path when printing out tree errors in scrub

A user reported a panic where we were panicing somewhere in
tree_backref_for_extent from scrub_print_warning.  He only captured the trace
but looking at scrub_print_warning we drop the path right before we mess with
the extent buffer to print out a bunch of stuff, which isn't right.  So fix this
by dropping the path after we use the eb if we need to.  Thanks,

Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

iio: adc: Document the regulator/clocks for exynos-adc

The exynos ADC won't work without a regulator called "vdd" and a clock
called "adc".  Document this fact in the device tree bindings.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: mxs-lradc: Do hardware initialization earlier

We need to initialize hardware before registering the touchscreen. Else,
we end up setting registers in mxs_lradc_ts_open(), getting called just
after registering the touchscreen with input_register_device() and by
the end of mxs_lradc_probe(), we reset the LRADC block hence losing the
correct configuration.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>

iio: exynos-adc: Fix typo in DT documentation

Fixes some typos in the documentation of exynos-adc.txt.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: exynos_adc: Remove redundant of_match_ptr macro

exynos_adc is a DT only driver and exynos_adc_match table is always
compiled in. Hence remove the macro.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:ad799x: Preallocate sample buffer

Avoid allocating and freeing the sample buffer for each transfer. Instead
allocate it once when we start sampling. Also pre-compute the number of bytes we
need to transfer in the same way.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:ad799x: Set IIO_CHAN_INFO_SCALE mask

The driver has support for reporting a channels scale, but none of the channels
set the IIO_CHAN_INFO_SCALE mask. Add the IIO_CHAN_INFO_SCALE to all channels to
indicate that the drivers supports reporting the scale.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:ad799x: Add helper macro for channel initialization

The ad779x channels all follow the same pattern. Add a helper macro to
initialize the channel spec, this allows us to drop quite a few lines.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:ad799x: Use i2c_smbus_{read,write}_word_data_swapped

Use i2c_smbus_{read,write}_word_data_swapped instead of open-coding it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:ad799x: Remove internal reference support

None of the devices supported by this driver have an internal voltage reference,
so remove support for it from the driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:ad799x: Remove unused ad799x_state fields

Remove fields from the ad799x_state struct which are not used.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

target: Fix RESERVATION_CONFLICT status regression for iscsi-target special case

This patch fixes a regression introduced in v3.8-rc1 code where a failed
target_check_reservation() check in target_setup_cmd_from_cdb() was causing
an incorrect SAM_STAT_GOOD status to be returned during a WRITE operation
performed by an unregistered / unreserved iscsi initiator port.

This regression is only effecting iscsi-target due to a special case check
for TCM_RESERVATION_CONFLICT within iscsi_target_erl1.c:iscsit_execute_cmd(),
and was still correctly disallowing WRITE commands from backend submission
for unregistered / unreserved initiator ports, while returning the incorrect
SAM_STAT_GOOD status due to the missing SAM_STAT_RESERVATION_CONFLICT
assignment.

This regression was first introduced with:

commit de103c93aff0bed0ae984274e5dc8b95899badab
Author: Christoph Hellwig <hch@lst.de>
Date:   Tue Nov 6 12:24:09 2012 -0800

    target: pass sense_reason as a return value

Go ahead and re-add the missing SAM_STAT_RESERVATION_CONFLICT assignment
during a target_check_reservation() failure, so that iscsi-target code
sends the correct SCSI status.

All other fabrics using target_submit_cmd_*() with a RESERVATION_CONFLICT
call to transport_generic_request_failure() are not effected by this bug.

Reported-by: Jeff Leung <jleung@curriegrad2004.ca>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

tcm_vhost: Avoid VIRTIO_RING_F_EVENT_IDX feature bit

This patch adds a VHOST_SCSI_FEATURES mask minus VIRTIO_RING_F_EVENT_IDX
so that vhost-scsi-pci userspace will strip this feature bit once
GET_FEATURES reports it as being unsupported on the host.

This is to avoid a bug where ->handle_kicks() are missed when EVENT_IDX
is enabled by default in userspace code.

(mst: Rename to VHOST_SCSI_FEATURES + add comment)

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Asias He <asias@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Revert "mm: introduce VM_POPULATE flag to better deal with racy userspace programs"

This reverts commit 186930500985 ("mm: introduce VM_POPULATE flag to
better deal with racy userspace programs").

VM_POPULATE only has any effect when userspace plays racy games with
vmas by trying to unmap and remap memory regions that mmap or mlock are
operating on.

Also, the only effect of VM_POPULATE when userspace plays such games is
that it avoids populating new memory regions that get remapped into the
address range that was being operated on by the original mmap or mlock
calls.

Let's remove VM_POPULATE as there isn't any strong argument to mandate a
new vm_flag.

Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

staging: comedi: amplc_dio200: fix C99 array initializer warnings

This patch fixes the following sparse warnings about use of
obsolete array initializer:

drivers/staging/comedi/drivers/amplc_dio200_pci.c:256:24: warning:
obsolete array initializer, use C99 syntax
drivers/staging/comedi/drivers/amplc_dio200_pci.c:269:24: warning:
obsolete array initializer, use C99 syntax
drivers/staging/comedi/drivers/amplc_dio200_pci.c:281:25: warning:
obsolete array initializer, use C99 syntax
drivers/staging/comedi/drivers/amplc_dio200_pci.c:298:25: warning:
obsolete array initializer, use C99 syntax
drivers/staging/comedi/drivers/amplc_dio200_pci.c:315:25: warning:
obsolete array initializer, use C99 syntax

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: remove utcGate from private data

This variable in the private data is not used. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: remove utcCtrl from private data

This variable in the private data is not necessary. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: remove intClearMask from private data

This variable in the private data is not necessary. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: remove intMask from private data

This variable in the private data is not necessary. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: remove dioStatus from private data

This variable in the private data is not necessary. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: merge private header into driver

Move the #define's in the private rtd520.h header into the source
file and delete the header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: cleanup multi-line comments

Cleanup the multi-line comments at the beginning of the file
so they follow the CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: cleanup rtd_dio_insn_config()

Add a local variable to make this function a bit cleaner and
remove the unnecessary comments.

The comedi core expects this function to return the number of
data parameters used. Change the return from '1' to 'insn->n'
to make this more apparent.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: cleanup rtd_dio_insn_bits()

Add some local variables to make this function a bit cleaner and
remove the unnecessary comments.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: use pci_ioremap_bar()

Use pci_ioremap_bar() to ioremap the PCI bars used by this driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: use plx register map from plx9080.h

Use the register map defines for the PLX9080 found in plx9080.h
instead of the custom named defines in rtd520.h.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove the "interrupt call test"

This commented out code in s626_ai_insn_read() is just left over
development test code. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: async commands require an interrupt

Only hook up the analog input command support if the interrupt is
available.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove the ai (*insn_config) function

This subdevice function is not implemented in the driver. Just
remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: cleanup subdevice init

For aesthetic reasons, add some whitespace to the subdevice init.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>