staging: comedi: adl_pci9118: introduce pci9118_ai_cmd_start()

Introduce a helper function to start the async command.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: enable DMA in common code path

The pci9118_ai_docmd_dma() function enables the DMA bit in the ai control
register for all acquisition modes. For aesthetics, move the enable of
this bit into the (*do_cmd).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up 'ai_cfg' in pci9118_ai_docmd_dma()

The 'ai_cfg' was already set to PCI9118_AI_CFG_PDTRG | PCI9118_AI_CFG_PETRG.
Don't bother setting those bits in pci9118_ai_docmd_dma().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: clarify acquisition mode (ai_do) determination

The async command can operation in 4 modes in this driver.

Modes 1 and 4 use timers 1 and 2 as a cascaded timer to trigger each conversion.
Mode 1 begins the acquisitions immediately (scan_begin_src == TRIG_FOLLOW) and
Mode 4 begins after an external trigger (scan_begin_src == TRIG_EXT). Both modes
use a convert_src == TRIG_TIMER.

Mode 2 uses timers 1 and 2 in a double timed action (scan_begin_src == TRIG_TIMER
and convert_src != TRIG_EXT (TRIG_TIMER and TRIG_NOW are valid)).

Mode 3 does not use the timers. Each acquisition is triggered by an external
signal (scan_begin_src == TRIG_FOLLOW and convert_src == TRIG_EXT.

The (*do_cmdtest) validates the scan_begin_src as TRIG_FOLLOW, TRIG_TIMER,
or TRIG_EXT. Remove the invalid check for TRIG_INT in the (*do_cmd).

Clarify the logic used to determine the mode in the (*do_cmd).

Also, simplify pci9118_calc_divisors(). Call i8253_cascade_ns_to_timer() directly
in the (*do_cmd) for the mode 1 and mode 4 cases. Call pci9118_calc_divisors()
only for mode 2 acquisitions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: TRIG_INT is not a valid scan_begin_src

The (*do_cmdtest) validates the scan_begin_src as TRIG_FOLLOW, TRIG_TIMER,
or TRIG_EXT. Remove the invalid check for TRIG_INT in the (*do_cmd).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove sanity checks in pci9118_calc_divisors()

The 'tim2' parameter to this function is actually the cmd->convert_arg which
was validated in the (*do_cmdtest) as:

err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
 devprivriv->ai_ns_min);

The sanity checks in this function are just repeating that validation. The
'min_pacer' sanity check is simply not needed.

Remove these unnecessary checks.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up pci9118_set_chanlist()

Define some macros to set the 'chan' and 'range' bits in the chanlist
register. Use them to tidy up this function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: absorb pci9118_ai_set_range_aref()

This function is called by the analog input (*insn_read) and (*do_cmd)
operations. The pci9118_set_chanlist() function is also called by those
operations. Setting the range and aref logically belongs with setting
the chanlist. To clarify the code, absorb pci9118_ai_set_range_aref()
into pci9118_set_chanlist().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename setup_channel_list()

Rename this function so it has namespace associated with the driver.

Also, this function always succeeds. Change the return type to void
and remove the unnecessary error handling by the callers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove unused parameters from setup_channel_list()

The 'rot' and 'usedma' parameters are not used in this function. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: merge pci9118_exttrg_{add,del}()

For aesthetics, merge these two helper functions and add a parameter,
'enable', to determine if the external trigger is being added (enabled)
or deleted (disabled).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: exttrg source is always EXTTRG_AI

The 'source'  passed to pci9118_exttrg_{add,del}() is always EXTTRG_AI.
Remove the parameter and unnecessary sanity checking. Also, since there
is only one vaild exttrg source, remove the unnecessary 'exttrg_users'
member from the private data.

The pci9118_exttrg_{add,del}() functions always succeed. For aesthetics
change the return type to void.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: fix interrupt_pci9118_ai_mode4_switch()

This function modifies the analog input acquistion programming after the first
DMA cycle to continue a "mode4" acqusition. Part of this programs timer 0 based
on the hardware address of the next buffer. When double buffering is not used
for DMA the "next" buffer is always the first, and only, buffer.

Add a parameter to this function to indicate what the "next" buffer actually is
and fix the callers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: change type of pci9118_dmabuf 'virt' member

For aesthetics, change the type of this member to avoid the casts when allocating
and freeing the DMA buffers. This does introduce a cast in move_block_from_dma()
but that cast is cleaner.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: introduce struct pci9118_dmabuf

For aesthetics, wrap the DMA buffer information in a struct.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'dmabuf_used_size' from private data

This member of the private data is set but never used. Just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: convert private data true/false flags to bit-fields

For aesthetics convert the private data true/false flags to bit-fields. The
'usemux' member is used in the driver as a flag. Refactor the analog input
subdevice init so this member can also be a bit-field.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'dmabuf_panic_size' from private data

This member of the private data is only used in some #if 0'ed code. Remove
it along with the unused code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove PCI9118_PARANOIDCHECK code

The comment states that paramoid checks are broken. They also would only
work for 12-bit analog input samples.

Instead of fixing the paranoid checking just remove it to simplify the
driver a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: do cfc_handle_events() at end of interrupt

Each of the error detections currently do a cfc_handle_events() and exits
the interrupt handler if the error is detected. The DMA and non-DMA handlers
also to a cfc_handle_events().

For aesthetics, use goto to exit the interrupt handler if an error is detected
and move the cfc_handle_events() call to the end of the interrupt.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: handle hardware errors in interrupt handler

Hardware errors will now always terminate an async command. For aesthetics,
absorb pci9118_decode_error_status() into the interrupt handler and use
the register map defines to remove the "magic" numbers. Refactor the code
to set the appropriate comedi event bits and handle the event.

Remove the unnecessary 'ai_maskerr' and 'ai_maskharderr' members from the
private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: handle error detection in main interrupt handler

The DMA and non-DMA both check the analog input status value to detect
hardware errors. For aesthetics, move the this detection into the main
interrupt handler. This allows removing the unused 'int_adstat' parameter
from the  DMA and non-DMA handlers. In addition, the 'int_daq' parameter
is also not used so remove it also.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: handle master/target abort in main interrupt handler

For aesthetics, move the master/target abort detection from the DMA handler to the
main interrupt handler. This allows removing the unused 'int_amcc' parameter from
the DMA and non-DMA handlers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: don't ignore hardware errors

The legacy (*attach) currently allows the user to pass a mask of error conditions
to ignore when running async commands. Remove this support so that the async
command is always terminated if the hardware reports an error.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: always try to use interrupt and DMA

This driver currently supports both the (*auto_attach) and legacy (*attach)
mechanisms. The (*auto_attach) always tries to use the interrupt and DMA to
support async commands with the analog input subdevice. The legacy (*attach)
only enables them depending on a user option that is passed to the (*attach).
The 'default' (i.e. option == 0) is to enable both the interrupt and DMA.

Simplify the attach by always trying to enable the interrupt and DMA.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: DMA requires an interrupt

In order for DMA to work we also need an interrupt. Refactor the code
so that the DMA allocation is only done if the interrupt is available.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: factor out DMA alloc/free

For aesthetics, factor the DMA allocation/free code out of the attach
and detach functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: vmk80xx: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rti800: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmad: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl812: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl730: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl724: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcimio: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_isadma: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_common: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio16d: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_ao: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt3000: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2811: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2801: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das800: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das6402: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08_isa: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas64: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci224: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pc236_common: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: aio_aio12_8: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci_dio: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3120: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1516: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_eeprom: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'ipu-for-staging-3.18' of git://git.pengutronix.de/git/pza/linux into work-next

Philipp writes:

IPUv3 CPMEM API change across staging and drm

staging: clean up checkpatch warnings in lustre

Silence checkpatch warning:

WARNING: type 'long long unsigned' should be specified in
[[un]signed] [short|int|long|long long] order

Signed-off-by: Eddie Kovsky <ewk@edkovsky.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192u - check for skb alloc failure

It's possible for dev_alloc_skb() to fail. Propagate the error to the caller,
so it can clean up and drop the packet. The sender should end up retransmitting
the packet, hopefully at a time we're prepared to allocate skb's again.

Reported-By: Nicholas Krause <xerofoify@gmail.com>
Signed-Off-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: octeon-hcd: removed unwanted return from void

This is a patch to the octeon-hcd.c file that fixes
checkpatch.pl warning by removing return statement from
void functions.

Signed-off-by: Nitin Kuppelur <nitinkuppelur@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove HalPhyRf_8188e.c

Move functions from HalPhyRf_8188e.c to phy.c .

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove HalPhyRf_8188e.h

Move macros and function declarations from HalPhyRf_8188e.h
to phy.h .

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: HalPhyRf_8188e.h :Remove unused function declaration

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: HalPhyRf_8188e.c: Remove unused functions

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function PHY_LCCalibrate_8188E()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function PHY_LCCalibrate_8188E()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_LCCalibrate_8188E()

Rename CamelCase local variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_IQCalibrate_8188E()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_SimularityCompare_8188E()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_PIModeSwitch()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages and local variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_PathAStandBy()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages and local variables.
Declare it as a static function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_MACSettingCalibration()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages and local variables.
Declare it as a static function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_PathADDAOn()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages and local variables.
Declare it as a static function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_ReloadMACRegisters()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages and local variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function reload_adda_reg()

Rename CamelCase local variables.
Remove unnecessary debugging messages and local variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_SaveMACRegisters()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages and local variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_SaveADDARegisters()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages and local variables.
Declare it as a static function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function pathb_fill_iqk()

Rename CamelCase local variables.
Remove unnecessary debugging messages and local variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function patha_fill_iqk()

Rename CamelCase local variables.
Remove unnecessary debugging messages and local variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_PathB_IQK_8188E()

Rename CamelCase function name and local variables.
Remove unnecessary debugging messages.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_PathA_IQK_8188E()

Rename CamelCase function name and local variables.
Remove unnecessary debugging messages and local variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_PathA_RxIQK()

Rename CamelCase function name and variables.
Remove unnecessary debugging messages.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework odm_TXPowerTrackingCallback_ThermalMeter_8188E()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>