staging/lustre/obdecho: remove metadata echo client

The metadata echo client requires server support and should not have
been included.

Signed-off-by: Liu Xuezhao <xuezhao.liu@emc.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/2674
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1330
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused header libcfs_heap.h

With removal of libcfs/heap.c, it's header can also go away now.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: emxx_udc: emxx_udc: remove spaces before semicolons

Remove spaces before semicolons to remove checkpatch warnings.

Signed-off-by: Andrew Plummer <plummer574@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: Remove casting the return value which is a void pointer

Casting the return value which is a void pointer is redundant.
The conversion from void pointer to any other pointer type is
guaranteed by the C programming language.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: imx-drm: Lines over 80 characters fixed.

This is a patch to the ipuv3-crtc.c file that fixes up two "lines
over 80 characters" warnings found by the checkpatch.pl tool,
keeping the alignment of the x/y/width/height parameters for
readability.

Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vme: remove redundant else condition

The else condition is redundant after a return. Remove these redundant else conditions.

Signed-off-by: Fred Chou <fred.chou.nd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: sync: Fix checkpatch warning: Missing a blank line after declarations

Signed-off-by: Dipak Zope <dipakzope.kernel.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove useless a variable within board_t

The use_interrupts is used only in dagp_request_irq() for checking
a value from user config file. It doesn't need in board_t struct.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove redundant setting a variable

The brd(board_t) is initialized with zero, so "intr_used"
is not needed to set zero when request_irq() is failed.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: Fix checkpatch include warning

checkpatch.pl fix. Use #include <linux/uaccess.h> instead of
<asm/uaccess.h>

Signed-off-by: Kieron Browne <kieron.browne@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove DPR Macros and related codes.

In dgnc_drivers.h, DPR macro and DPR_* macros are defined but do nothing.

So remove them and related codes.

CC: Lidza Louina <lidza.louina@gmail.com>
CC: Mark Hounschell <markh@compro.net>
Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: netlogic: xlr_net.c Fixed code-style warnings

Fixed the following warning generated by checkpatch.pl:

WARNING: Missing a blank line after declarations

Signed-off-by: Chaitanya Hazarey <c@24.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: Netlogic: Move all the netdev under single parent device

XLR has one network controller and XLS has two network controllers, each
controller has 4 gmac devices. This patch initializes each controller as
a parent device and the four gmac devices of a controller are connected
to the parent controller as a child

Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: Netlogic: PHY address calculation fix

SGMII PHY address calculation should be based on phy_addr of priv data

Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: Netlogic: Add nlm_cop2_enable/restore function name change

The function name nlm_cop2_enable() and nlm_cop2_restore() in
file "netlogic/xlr/fmn.c" has been renamed to nlm_cop2_enable_irqsave
and nlm_cop2_disable_irqrestore respectively in commit "64f6ebe
MIPS: Netlogic: rename nlm_cop2_save/restore".

This patch takes care of these changes

Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8821ae: Fix spaces required around that '<' errors

Fix checkpatch.pl spaces required around that '<' errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8192u: Fix switch and case should be at the same indent errors

Fix checkpatch.pl switch and case should be at the same indent errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8192u: Fix space required after that ',' errors

Fix checkpatch.pl space required after that ',' errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8723au: Fix space prohibited before that close parenthesis ')' errors

Fix checkpatch.pl space prohibited before that close parenthesis ')' errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8723au: Fix "foo* bar" should be "foo *bar" errors

Fix checkpatch.pl "foo* bar" should be "foo *bar" errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: fixed coding style issues

Fixed missing blank line after declarations issues

Signed-off-by: Matthew Casey <mdcasey@chabloom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: fix sparse warning for static declarations in rtl8821ae/stats.c

This patch fixes the following sparse warnings in rtl8821ae/stats.c

drivers/staging/rtl8821ae/stats.c:62:6: warning: symbol 'rtl_translate_todbm' was not declared. Should it be static?
drivers/staging/rtl8821ae/stats.c:101:6: warning: symbol 'rtl_process_ui_rssi' was not declared. Should it be static?

Signed-off-by: Hoang Tran <hoangtran.gwr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: using unique names is good

fixes:

drivers/staging/built-in.o:(.opd+0xaab8): multiple definition of `rtl88e_phy_rf_config'
drivers/net/built-in.o:(.opd+0x78840): first defined here
drivers/staging/built-in.o:(.opd+0xa9f8): multiple definition of `rtl88e_download_fw'
drivers/net/built-in.o:(.opd+0x781b0): first defined here
drivers/staging/built-in.o: In function `.rtl88e_phy_rf_config':
(.text+0xe0a00): multiple definition of `.rtl88e_phy_rf_config'
drivers/net/built-in.o:(.text+0xe85a48): first defined here
drivers/staging/built-in.o: In function `.rtl88e_download_fw':
(.text+0xdf28c): multiple definition of `.rtl88e_download_fw'
drivers/net/built-in.o:(.text+0xe6f330): first defined here
drivers/staging/built-in.o: In function `.rtl88e_phy_mac_config':
(.text+0xdf984): multiple definition of `.rtl88e_phy_mac_config'
drivers/net/built-in.o:(.text+0xe84a8c): first defined here
drivers/staging/built-in.o: In function `.rtl88e_phy_bb_config':
(.text+0xdfa2c): multiple definition of `.rtl88e_phy_bb_config'
drivers/net/built-in.o:(.text+0xe84d14): first defined here
drivers/staging/built-in.o:(.opd+0xaa58): multiple definition of `rtl88e_phy_bb_config'
drivers/net/built-in.o:(.opd+0x78828): first defined here
drivers/staging/built-in.o:(.opd+0xaa28): multiple definition of `rtl88e_phy_mac_config'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: rxtx create new structure vnt_tx_short_buf_head for csBeacon_xmit

This is a merger of PSTxDataHead_ab and PSTxShortBufHead of which typedef struct tagSTxShortBufHead
is removed.

This is formed as fifo_ctl, time_stamp, struct vnt_phy_field, duration and time_stamp_off.

Replacing stuctures in csBeacon_xmit and doing endian correction where necessary.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: rxtx.h structure vnt_mic_hdr add IEEE80211_CCMP_PN_LEN macro

ccmp_pn is the size of IEEE80211_CCMP_PN_LEN (6)

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: 80211mgr.h add ieee80211.h header and fix conflicts

Fix conflict with WLAN_EID macros, by removing them.

This allows the adding other definitions from the ieee80211 header.

Eventually the 80211mgr.h header will be removed.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: dead code remove device_nics variable

The module can not load more than once.

Remove device_nics, MAX_UINTS and OPTION_DEFAULT

Remove dead index variable from device_get_options

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: remove multiple instances of netdevice.

netdevice can only be created once.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: remove multiple instances of driver loading.

The driver can only load once from the instance provided
by pci_dev.

struct vnt_private next, prev and pDevice_Infos are removed.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Remove BBvCalculateParameter and its data members

Remove data members bySignalField*, byServiceField*, wTransmitLength*
from structures in desc.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: card.c change BBvCalculateParameter to vnt_get_phy_field

Using vnt_get_phy_field means the values are not in the
correct write order the lower word and the upper word need
to be swapped over for an u32 write out.

Rather create another data variable to manipulate this structure.
Create a new union vnt_phy_field_swap with struct vnt_phy_field,
the u16 word swap and the u32 write out.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: rxtx.c change BBvCalculateParameter to function vnt_get_phy_field

Removing wLen and pointing to correct member.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: baseband add new function vnt_get_phy_field

This is a replacement for BBvCalculateParameter for getting
the phy fields via struct vnt_phy_field

This is a direct copy from the vt6656 driver.

BBvCalculateParameter will removed later.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: add new stucture struct vnt_phy_field for rts/cts/data structures

This will replace bySignalField*, byServiceField* and wTransmitLength_b
members of these strutures, these are removed in the last patch.

The len member is of little endian type.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: device.h dead code remove bCCK

bCCK is always set to true, the only place it is used is in
BBvCalculateParameter which nots the value to false.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: remove remaining comments of PLICE_DEBUG

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: vntwifi.c remove unused directive PLICE_DEBUG

PLICE_DEBUG is not defined remove dead code.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: remove PLICE_DEBUG where it is defined

Remove macro and directive leaving the code.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: main_usb.c remove undefined PLICE_DEBUG code.

PLICE_DEBUG is not defined in any header for this file.

Remove code, references and directives.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Use ether_crc in kernel.

ether_crc is already in kernel remove local code and
include linux/crc32.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Add missing include to pick up prototype

This fixes the following sparse warning:

drivers/staging/rtl8188eu/hal/HalHWImg8188E_MAC.c:119:6: warning: symbol
'rtl88e_phy_mac_config' was not declared. Should it be static?

Signed-off-by: Max Vozeler <max@hinterhof.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused wrapper function rtw_hal_read_bbreg()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_CalculateBitShift()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Implement NAPI support

This implements NAPI support for et131x by:

-adding a napi_struct to the private adapter struct
-changing netfif_rx_skb() call to netif_receive_skb()
-changing et131x_handle_recv_interrupt() to et131x_handle_recv_pkts()
 and taking a budget allocation.
-changing et131x_handle_send_interrupt() to et131x_handle_send_pkts()
-replacing bottom half workqueue with poll function which handles
 send & receive of skbs.
-adding various other necessary standard napi calls.

Also remove this item from the README TODO list.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Fix ET_INTR_TXDMA_ISR register name typo

We actually mean to clear the ET_INTR_TXDMA_ISR reg after handling
a completed transfer, not the ET_INTR_TXDMA_ERR reg, which should
get handled immediately after.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Rename NUM_PACKETS_HANDLED to MAX_PACKETS_HANDLED

To better describe it's use as a hard limit.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Remove unnecessary i2c_wack variable

i2c_wack is only used to implement a while(1) loop, so let's remove it.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Use for loop to initialise contiguous macstat registers to zero

Replace a long list of contiguous writel() calls with a for loop iterating
over the same address values.

Also remove redundant comments on the macstat registers, the variable names
are good enough.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Use for loop to initialise contiguous registers to zero

Replace a long list of contiguous writel() calls with a for loop iterating
over the same values.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Don't handle rx/tx packets when changing mtu

There's no need to handle any rx/tx interrupts in the middle of an mtu
change, so don't.

After this change, receive and transmit interrupts are only handled in
one place, which paves the way to using NAPI.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Use eth_mac_addr() instead of duplicating the functionality

There's already working code to set the mac address, so let's use it.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: move boilerplate text to addi_apci_1564.c

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: Fix code style in jr3_pci.c

Static variables are initialised to 0 by GCC.
Fixes checkpatch.pl error:
  ERROR: do not initialise statics to 0 or NULL
  #684: FILE: jr3_pci.c:684:
  + static const struct jr3_pci_board *board = NULL;

Signed-off-by: Vladimir A. Nazarenko <naszar@ya.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: fix sparse endianness warnings

Sparse has many warnings like:

drivers/staging/comedi/drivers/usbduxsigma.c:293:21: warning: cast to
restricted __be32

on lines on which devpriv->in_buf is passed to be32_to_cpu().  This
suggests that this variable should actually be of type __be32.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: fix sparse endianness warnings

Sparse has many warnings like:

drivers/staging/comedi/drivers/usbdux.c:366:32: warning: cast to
restricted __le16

on lines on which devpriv->in_buf or devpriv->insn_buf are passed to
le16_to_cpu().  This suggests that both of these variables should actually
be of type __le16.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Kconfig: make COMEDI_BOND select COMEDI_KCOMEDILIB

Currently, to select the "comedi_bond" driver, the "kcomedilib" support
has to be selected first.  It seems more natural to allow the
"comedi_bond" driver to be selected on its own and to automatically
select the "kcomedilib" module as a result of that.  Change the
dependency/select relationship between the two configuration options to
do that.

Also, make "kcomedilib" a module that can be selected independently,
perhaps for use by out-of-tree modules, although it is not terribly
useful for anything other than "comedi_bond" currently.

Also, improve the help text for the config options.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: fix a precedence bug

The addition operation has higher precedence than ?: so this would write
to PCI230_DACOUT1 instead of devpriv->daqio + PCI230_DACOUT1.

Fixes: 4f9c63fe5333 ('staging: comedi: amplc_pci230: refactor iobase addresses')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: use comedi_pci_detach()

Use comedi_pci_detach() to handle the boilerplate part of the (*detach)
for this PCI driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: tidy up freeing of the dma buffers

Currently the dma buffers are freed during the detach of the driver using
the function s626_close_dma_b(). The buffers are also freed while the
interrupt handler is still attached. This could result in a race condition.

Refactor the code so that the buffers are freed after the interrupt handler
is released and the PCI device is disabled.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: gsc_hpdi: tidy up freeing of the dma buffers

Factor the freeing of the dma buffers out of the (*detach).

Move the freeing of the buffers so that it occurs after the PCI device
has been disabled to avoid any race condition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas64: tidy up freeing of the dma buffers

Factor the freeing of the dma buffers out of the (*detach).

Move the freeing of the buffers so that it occurs after the PCI device
has been disabled to avoid any race condition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove 'valid' member from private data

This member is set at the end of the driver attach and is only used to
verify that icp_multi_reset() can be called in the (*detach). The only
requirement for icp_multi_reset() to work is that the dev->mmio is valid.

Remove the 'valid' member from the private data and use 'dev->mmio' to
see if the reset can be done.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci_dio: remove 'valid' member from private data

This member is set at the end of the driver attach and is only used to
verify that pci_dio_reset() can be called in the (*detach). The only
requirement for pci_dio_reset() to work is that the dev->iobase is valid.

Remove the 'valid' member from the private data and use 'dev->iobase' to
see if the reset can be done.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_pci: introduce comedi_pci_detach()

Introduce a generic (*detach) function for comedi PCI drivers to handle
the boilerplate code needed to detach a PCI driver.

This function works similar to comedi_legacy_detach() where it will:

  * free the dev->irq if it has been requested
  * iounmap the dev->mmio addres if it has been ioremap'ed

The helper then calls comedi_pci_disable() to release the regions and
disable the PCI device.

Use the new helper directly for the (*detach) in the following cases:

  * where comedi_pci_disable() is used directly for the (*detach)
  * where the detach function is just boilerplate

Use the new helper in the (*detach) of the simpler PCI drivers. Call
the helper after disabling interrupts (reset) and before any additional
cleanup (kfree) to avoid any race conditions with the interrupt handler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: remove sanity checks in me4000_ao_insn_write()

The comedi core does the sanity checking of the comedi_insn before
calling the (*insn_write). Remove the unnecessary checks.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2801: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas64: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mf6x4: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mf6x4: analog output data does not need extra masking

The comedi core validates that all the data values are <= s->maxdata
before calling the (*insn_write) function. The extra masking is not
needed. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcimdas: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcimdas: cleanup cb_pcimdas_ao_winsn()

The comedi core validates the insn->chanspec and data values before
calling the (*insn_write) functions. The 'chan' will always be valid
and the data values do not need to be masked.

Tidy up this function and remove the unnecessary code.

For aesthetics, rename the function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_670x: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_670x: cleanup ni_670x_ao_winsn()

For aesthetics, rename this function and tidy it up a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: cleanup dmm32at_ao_winsn()

For aesthetics, rename the function and tidy it up a bit. Also rename the
registers used by this function and add a macro to set the 'chan' bits in
the MSB data register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

For aesthetics, tidy up the (*insn_write) a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: remove #if 0'ed out code in ao (*insn_write)

This code has been disabled since it's initial commit. It must not be
needed so just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rti800: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rti800: save unmunged data for ao readback

The unmunged data should be saved for readback not the munged data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

The das08_ao_initialize() function is only called when the subdevice
is first setup during the attach. It is used to initialize the channels
to a known state. Absorb that function to simplify the code a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: fix bug in das08_ao_winsn()

The comedi core expects (*insn_write) functions to write insn->n values
to the hardware and return the number of values written.

Currently, this function only writes the first value. Fix it to work
like the core expects.

For aesthetics, rename the function and tidy it up a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: quatech_daqp_cs: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: quatech_daqp_cs: fix bug in daqp_ao_insn_write()

The comedi core expects (*insn_write) functions to write insn->n values
to the hardware and return the number of values written.

Currently, this function only writes the first value. Fix it to work
like the core expects.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt3000: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

For aesthetics, rename the (*insn_write) function and tidy it up a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Remove the unused private data and its allocation.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc: save unmunged data for ao readback

The unmunged data should be saved for readback not the munged data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me_daq: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me_daq: fix bug in me_ao_insn_write()

The comedi core expects (*insn_write) functions to write insn->n values
to the hardware and return the number of values written.

Currently, this function only writes the first value. The core also
validates all the data values so the extra masking with s->maxdata is
not needed. Fix this function to work like the core expects.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio16d: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio16d: cleanup atmio16d_ao_insn_write()

The comedi core validates the insn->chanspec and data values before
calling the (*insn_write) functions. The 'chan' will always be valid.

Tidy up this function up a bit and remove the unnecessary code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

For aesthetics, rename the (*insn_write) function and tidy it up.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci224: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

For aesthetics, rename the (*insn_write) function and tidy it up.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_das16_cs: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

For aesthetics, rename the (*insn_write) function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3501: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2811: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

For aesthetics, rename the (*insn_write) function and tidy it up.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>