drm/bridge: analogix_dp: Convert to GPIO descriptors

This converts the Analogix display port to use GPIO descriptors
instead of DT-extracted numbers.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609231339.22136-1-linus.walleij@linaro.org

drm/bridge: analogix-anx78xx: Drop of_gpio.h include

This include is only used for some gpio drivers and consumers
that look up GPIO numbers directly from the device tree.
This driver does not use it and only needs <linux/gpio/consumer.h>.
Delete the unused include.

Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609223254.8523-1-linus.walleij@linaro.org

drm/bridge: analogix_dp: possible condition with no effect (if == else)

fix below warning reported by coccicheck

./drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:1414:6-8: WARNING:
possible condition with no effect (if == else)

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190525175937.GA29368@hari-Inspiron-1545

panel: rocktech: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613115717.GB26335@kroah.com

vga_switcheroo: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Also, because there is no need to save the file dentry, remove the local
variable and just recursively delete the whole directory when shutting
down.

Cc: Lukas Wunner <lukas@wunner.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613114455.GA13119@kroah.com

drm: Remove functions with kmap-object argument from GEM VRAM helpers

The GEM VRAM functions with kmap-object argument are not required any
longer. Remove them.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-10-tzimmermann@suse.de

drm: Remove lock interfaces from GEM VRAM helpers

The lock functions and the locked-pin/unpin functions of GEM VRAM are not
required any longer. Remove them.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-9-tzimmermann@suse.de

drm/mgag200: Rewrite cursor handling

The cursor handling in mgag200 is complicated to understand. It touches a
number of different BOs, but doesn't really use all of them.

Rewriting the cursor update reduces the amount of cursor state. There are
two BOs for double-buffered HW updates. The source BO updates the one that
is currently not displayed and then switches buffers. Explicit BO locking
has been removed from the code. BOs are simply pinned and unpinned in video
RAM.

v2:
* pin cursor BOs to current location

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-8-tzimmermann@suse.de

drm/mgag200: Pin framebuffer BO during dirty update

Another explicit lock operation of a GEM VRAM BO is located in mgag200's
framebuffer update code. Instead of locking the BO, we pin it to wherever
it is.

v2:
* update with pin flag of 0

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-7-tzimmermann@suse.de

drm/ast: Pin framebuffer BO during dirty update

Another explicit lock operation of a GEM VRAM BO is located in AST's
framebuffer update code. Instead of locking the BO, we pin it to wherever
it is.

v2:
* update with pin flag of 0

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-6-tzimmermann@suse.de

drm/ast: Pin and map cursor source BO during update

The ast driver used to lock the cursor source BO during updates. Locking
should be done internally by the BO's implementation, so we pin it instead
to system memory. The mapping information is also stored in the BO. No
need to have an extra argument to the kmap function.

v2:
* pin cursor BOs to current location

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-5-tzimmermann@suse.de

drm/ast: Remove obsolete or unused cursor state

The ast driver's data structures store unused or uncecessary cursor
state. Most of the cursor state is already stored elsewhere and can
be retrieved when necessary. Remove the obsolete fields and adapt
users accordingly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-4-tzimmermann@suse.de

drm/ast: Unpin cursor BO during cleanup

The unpin operation was missing from ast_cursor_fini(). Fixed now.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-3-tzimmermann@suse.de

drm/gem-vram: Support pinning buffers to current location

Pinning a buffer prevents it from being moved to a different memory
location. For some operations, such as buffer updates, it is not
important where the buffer is located. Setting the pin function's
pl_flag argument to 0 will pin the buffer to whereever it is stored.

v2:
* document pin flags in PRIME pin helper

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-2-tzimmermann@suse.de

drm/mcde: Fix an uninitialized variable

We never set "vblank" to "false".

Current versions of GCC will initialize it to zero automatically at
certain optimization levels so that's probably why this didn't show up
in testing.

Fixes: 5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529113458.GG19119@mwanda

drm/ast: Drop fb_debug_enter/leave

ast doesn't implement the mode_set_base_atomic hook this would need,
so this is dead code.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sam Bobroff <sbobroff@linux.ibm.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612091253.26413-2-daniel.vetter@ffwll.ch

drm/virtio: drop framebuffer dirty tracking code

No need to have our own implementation,
atomic helpers can do it for us.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190611125408.29421-1-kraxel@redhat.com

drm: Tweak drm_encoder_helper_funcs.enable kerneldoc

I copied the kerneldoc for encoder_funcs.atomic_enable from encoder_funcs.enable
in a recent patch [1]. Sam rightly pointed out in the review that "for symmetry
with" text is awkward [2]. So here's a patch to fix up the source of the awkward
language.

[1] https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-2-sean@poorly.run
[2] https://patchwork.freedesktop.org/patch/msgid/20190611185352.GA16305@ravnborg.org

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612150038.194843-1-sean@poorly.run

dma-fence/reservation: Markup rcu protected access for DEBUG_MUTEXES

Mark the access to reservation_object.fence as being protected to
silence sparse.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612132830.31221-1-chris@chris-wilson.co.uk

gpu: drm: bridge: sii9234: simplify getting the adapter of a client

We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608105619.593-3-wsa+renesas@sang-engineering.com

drm: Reverse lock order in pan_display_legacy()

Acquiring drm_client_dev.modeset_mutex after the locks in drm_fb_helper.dev
creates a deadlock with drm_setup_crtcs() as shown below:

  [    4.959319] fbcon: radeondrmfb (fb0) is primary device
  [    4.993952] Console: switching to colour frame buffer device 240x67
  [    4.994040]
  [    4.994041] ======================================================
  [    4.994041] WARNING: possible circular locking dependency detected
  [    4.994042] 5.2.0-rc4-1-default+ #39 Tainted: G            E
  [    4.994043] ------------------------------------------------------
  [    4.994043] systemd-udevd/369 is trying to acquire lock:
  [    4.994044] 00000000fb622acb (&client->modeset_mutex){+.+.}, at: drm_fb_helper_pan_display+0x103/0x1f0 [drm_kms_helper]
  [    4.994055]
  [    4.994055] but task is already holding lock:
  [    4.994055] 0000000028767ae4 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x42/0xf0 [drm]
  [    4.994072]
  [    4.994072] which lock already depends on the new lock.
  [    4.994072]
  [    4.994072]
  [    4.994072] the existing dependency chain (in reverse order) is:
  [    4.994073]
  [    4.994073] -> #3 (crtc_ww_class_mutex){+.+.}:
  [    4.994076]        lock_acquire+0x9e/0x170
  [    4.994079]        __ww_mutex_lock.constprop.18+0x97/0xf40
  [    4.994080]        ww_mutex_lock+0x30/0x90
  [    4.994091]        drm_modeset_lock+0x42/0xf0 [drm]
  [    4.994102]        drm_modeset_lock_all_ctx+0x1f/0xe0 [drm]
  [    4.994113]        drm_modeset_lock_all+0x5e/0x1a0 [drm]
  [    4.994163]        intel_modeset_init+0x60b/0xda0 [i915]
  ..
  [    4.994253]
  [    4.994253] -> #2 (crtc_ww_class_acquire){+.+.}:
  [    4.994255]        lock_acquire+0x9e/0x170
  [    4.994270]        drm_modeset_acquire_init+0xcc/0x100 [drm]
  [    4.994280]        drm_modeset_lock_all+0x44/0x1a0 [drm]
  [    4.994320]        intel_modeset_init+0x60b/0xda0 [i915]
  ..
  [    4.994403]
  [    4.994403] -> #1 (&dev->mode_config.mutex){+.+.}:
  [    4.994405]        lock_acquire+0x9e/0x170
  [    4.994408]        __mutex_lock+0x62/0x8c0
  [    4.994413]        drm_setup_crtcs+0x17c/0xc50 [drm_kms_helper]
  [    4.994418]        __drm_fb_helper_initial_config_and_unlock+0x34/0x530 [drm_kms_helper]
  [    4.994450]        radeon_fbdev_init+0x110/0x130 [radeon]
  ..
  [    4.994535]
  [    4.994535] -> #0 (&client->modeset_mutex){+.+.}:
  [    4.994537]        __lock_acquire+0xa85/0xe90
  [    4.994538]        lock_acquire+0x9e/0x170
  [    4.994540]        __mutex_lock+0x62/0x8c0
  [    4.994545]        drm_fb_helper_pan_display+0x103/0x1f0 [drm_kms_helper]
  [    4.994547]        fb_pan_display+0x92/0x120
  [    4.994549]        bit_update_start+0x1a/0x40
  [    4.994550]        fbcon_switch+0x392/0x580
  [    4.994552]        redraw_screen+0x12c/0x220
  [    4.994553]        do_bind_con_driver.cold.30+0xe1/0x10d
  [    4.994554]        do_take_over_console+0x113/0x190
  [    4.994555]        do_fbcon_takeover+0x58/0xb0
  [    4.994557]        notifier_call_chain+0x47/0x70
  [    4.994558]        blocking_notifier_call_chain+0x44/0x60
  [    4.994559]        register_framebuffer+0x231/0x310
  [    4.994564]        __drm_fb_helper_initial_config_and_unlock+0x2fd/0x530 [drm_kms_helper]
  [    4.994590]        radeon_fbdev_init+0x110/0x130 [radeon]
  ..

This problem was introduced in

  d81294afe drm/fb-helper: Remove drm_fb_helper_crtc

Reversing the lock ordering in pan_display_legacy() fixes the issue.

Fixes: d81294afeecd ("drm/fb-helper: Remove drm_fb_helper_crtc")
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611115716.7052-1-tzimmermann@suse.de

drm/stm: dsi: add power on/off phy ops

These new physical operations are helpful to power_on/off the dsi
wrapper. If the dsi wrapper is powered in video mode, the display
controller (ltdc) register access will hang when DSI fifos are full.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558952499-15418-3-git-send-email-yannick.fertre@st.com

drm/bridge/synopsys: dsi: add power on/off optional phy ops

Add power on & off optional physical operation functions, helpful to
program specific registers of the DSI physical part.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558952499-15418-2-git-send-email-yannick.fertre@st.com

drm/rockchip: dw_hdmi: Handle suspend/resume

On Rockchip rk3288-based Chromebooks when you do a suspend/resume
cycle:

1. You lose the ability to detect an HDMI device being plugged in.

2. If you're using the i2c bus built in to dw_hdmi then it stops
working.

Let's call the core dw-hdmi's suspend/resume functions to restore
things.

NOTE: in downstream Chrome OS (based on kernel 3.14) we used the
"late/early" versions of suspend/resume because we found that the VOP
was sometimes resuming before dw_hdmi and then calling into us before
we were fully resumed.  For now I have gone back to the normal
suspend/resume because I can't reproduce the problems.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604204207.168085-2-dianders@chromium.org

drm: bridge: dw-hdmi: Add hook for resume

On Rockchip rk3288-based Chromebooks when you do a suspend/resume
cycle:

1. You lose the ability to detect an HDMI device being plugged in.

2. If you're using the i2c bus built in to dw_hdmi then it stops
working.

Let's add a hook to the core dw-hdmi driver so that we can call it in
dw_hdmi-rockchip in the next commit.

NOTE: the exact set of steps I've done here in resume come from
looking at the normal dw_hdmi init sequence in upstream Linux plus the
sequence that we did in downstream Chrome OS 3.14.  Testing show that
it seems to work, but if an extra step is needed or something here is
not needed we could improve it.

As part of this change we'll refactor the hardware init bits of
dw-hdmi to happen all in one function and all at the same time.  Since
we need to init the interrupt mutes before we request the IRQ, this
means moving the hardware init earlier in the function, but there
should be no problems with that.  Also as part of this we now
unconditionally init the "i2c" parts of dw-hdmi, but again that ought
to be fine.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604204207.168085-1-dianders@chromium.org

drm/fb: document dirty helper better

Apparently little known fact that there's no need to hand-roll your own
anymore. Cc'ing a bunch of driver people who might want to know this
too.

v2: s/none/known/ (Chris Wilson)

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Lechner <david@lechnology.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611112859.16375-1-daniel.vetter@ffwll.ch

drm/todo: Add bootsplash entry

Ease entry for anyone wanting to pick up the bootsplash work by providing
a couple of pointers.

v2: Add Sam as contact (Sam)

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608152657.36613-6-noralf@tronnes.org

drm/fb-helper: Move out modeset config code

No functional changes, just moving code as-is and fixing includes.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608152657.36613-4-noralf@tronnes.org

drm/fb-helper: Prepare to move out modeset config code

This prepares the modeset code so it can be moved out as-is in the next
patch.

v3: Remove stray newline

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608152657.36613-3-noralf@tronnes.org

drm/fb-helper: Remove drm_fb_helper_connector

All drivers add all their connectors so there's no need to keep around an
array of available connectors. Instead we just put the useable (not
writeback) connectors in a temporary array using
drm_client_for_each_connector_iter() everytime we probe the outputs.
Other places where it's necessary to look at the connectors, we just
iterate over them using the same iterator function.

Rename functions which signature is changed since they will be moved to
drm_client in a later patch.

v6: Improve commit message (Sam Ravnborg)

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608152657.36613-2-noralf@tronnes.org

drm/virtio: Add memory barriers for capset cache.

After data is copied to the cache entry, atomic_set is used indicate
that the data is the entry is valid without appropriate memory barriers.
Similarly the read side was missing the corresponding memory barriers.

Signed-off-by: David Riley <davidriley@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190610211810.253227-5-davidriley@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/amd: drop use of drmP.h in remaining files

With this commit drm/amd/ has no longer any uses of
the deprecated drmP.h header file.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-11-sam@ravnborg.org

drm/amd: drop use of drmP.h in amdgpu/amdgpu*

Drop use of drmP.h in all files named amdgpu*
in drm/amd/amdgpu/

Fix fallout.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-10-sam@ravnborg.org

drm/amd: drop use of drmP.h in display/

Drop all uses of drmP.h in drm/amd/display/.
Fix fallout.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-9-sam@ravnborg.org

drm/amd: drop use of drmP.h in powerplay/

Delete the only include of drmP.h in powerplay/.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-8-sam@ravnborg.org

drm/amd: drop use of drmP.h from all header files

Drop use of the deprecated drmP.h header file from
all amd header files.
This makes it a more smooth process to get rid of drmP.h
in the .c files.

Added include files and forwards as appropriate.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-7-sam@ravnborg.org

drm/amd: drop use of drmP.h in atom.h

Drop use of the deprecated drmP.h header from atom.h

Fix fallout in various files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-6-sam@ravnborg.org

drm/amd: drop use of drmP.h in amdgpu.h

Delete the unused drmP.h from amdgpu.h.
Fix fallout in various files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-5-sam@ravnborg.org

drm/amd: drop use of drmp.h in os_types.h

Drop use of the deprecated drmP.h from display/dc/os_types.h

Fix all fallout after this change.
Most of the fixes was adding a missing include of vmalloc.h.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-4-sam@ravnborg.org

drm/amd: drop dependencies on drm_os_linux.h

Fix so no files in drm/amd/ depends on the
deprecated drm_os_linux.h header file.

It was done manually:
- remove drm_os_linux.h from drmP.h
- fix all build errros

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-3-sam@ravnborg.org

drm: fix build errors with drm_print.h

drm_print.h requires <drm/drm.h> to fix build when macros are used.
Pull in the header file in drm_print.h so users do not have to do it.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-2-sam@ravnborg.org

drm/radeon: drop use of drmP.h (2/2)

Drop use of drmP.h in remaining .c files.
To ease review a little the drmP.h removal was divided in two commits.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-8-sam@ravnborg.org

drm/radeon: drop use of drmP.h (1/2)

Drop use of drmP.h in all .c files named radeon*c.
To ease review a little drmP.h removal was divided in two commits.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-7-sam@ravnborg.org

drm/radeon: prepare header files for drmP.h removal

While removing drmP.h from all .c files the list of
header files are also sorted alphabetically.
To allow this adjust the header files to pull in
the dependencies they needed to allow this.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-6-sam@ravnborg.org

drm/radeon: drop drmP.h from header files

To ease conversion of .c files drop include of
drmP.h from all header files.
And fix-up build errors caused by this.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-5-sam@ravnborg.org

drm/radeon: drop dependency on drm_os_linux.h

The drm_os_linux.h header file is deprecated.
Drop all uses of symbols from this file.
All macros are just opencoded.
A few adjustments to include files was required as the obsolete
drm_os_linux.h included these headers.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-4-sam@ravnborg.org

drm: drm_debugfs.h self-contained

While removing drmP.h from drm/radeon a few files ended
up including drm_debugfs.h as the first file.
This failed build due to missing dependencies in drm_debugfs.h.

Add the missing include files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-3-sam@ravnborg.org

drm: drm_crtc.h self-contained

While removing drmP.h from drm/radeon a few files ended
up including drm_crtc.h as the first file.
This failed build due to a missing dependency in drm_crtc.h.

Add the missing include file.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-2-sam@ravnborg.org

drm/bridge/synopsys: dw-hdmi: Fix unwedge crash when no pinctrl entries

In commit 50f9495efe30 ("drm/bridge/synopsys: dw-hdmi: Add "unwedge"
for ddc bus") I stupidly used IS_ERR() to check for whether we have an
"unwedge" pinctrl state even though on most flows through the driver
the unwedge state will just be NULL.

Fix it so that we consistently use NULL for no unwedge state.

Fixes: 50f9495efe30 ("drm/bridge/synopsys: dw-hdmi: Add "unwedge" for ddc bus")
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610175234.196844-1-dianders@chromium.org

dma-fence: Signal all callbacks from dma_fence_release()

This is an illegal scenario, to free the fence whilst there are pending
callbacks. Currently, we emit a WARN and then cast aside the callbacks
leaving them dangling. Alternatively, we could set an error on the fence
and then signal fence so that any dependency chains from the fence can
be tidied up, and if they care they can check for the error.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609110002.31915-1-chris@chris-wilson.co.uk

drm/fb-helper: Move out commit code

Move the modeset commit code to drm_client_modeset.
No changes except exporting API.

v7: Export drm_client_panel_rotation() (Gerd Hoffmann)
v2: Move to drm_client_modeset.c instead of drm_client.c

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531140117.37751-5-noralf@tronnes.org

drm/fb-helper: Prepare to move out commit code

This makes the necessary changes so the commit code can be moved out to
drm_client as-is in the next patch. It's split up to ease review.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531140117.37751-4-noralf@tronnes.org

drm/atomic: Move __drm_atomic_helper_disable_plane/set_config()

Prepare for moving drm_fb_helper modesetting code to drm_client.
drm_client will be linked to drm.ko, so move
__drm_atomic_helper_disable_plane() and __drm_atomic_helper_set_config()
out of drm_kms_helper.ko.

While at it, fix two checkpatch complaints:
- WARNING: Block comments use a trailing */ on a separate line
- CHECK: Alignment should match open parenthesis

v7: Declare drm_mode_set and drm_plane_state

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531140117.37751-2-noralf@tronnes.org

drm/crc-debugfs: Also sprinkle irqrestore over early exits

I. was. blind.

Caught with vkms, which has some really slow crc computation function.

Fixes: 1882018a70e0 ("drm/crc-debugfs: User irqsafe spinlock in drm_crtc_add_crc_entry")
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606211544.5389-1-daniel.vetter@ffwll.ch

drm/bridge: sii902x: fix comparision of u32 with less than zero

The less than check for the variable num_lanes is always going to be
false because the variable is a u32.  Fix this by making num_lanes an
int and also make loop index i an int too.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: ff5781634c41 ("drm/bridge: sii902x: Implement HDMI audio support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603142102.27191-1-colin.king@canonical.com

drm/bridge: sii902x: re-order conditions to prevent out of bounds read

This should check that "i" is within bounds before checking reading from
the array.

Fixes: ff5781634c41 ("drm/bridge: sii902x: Implement HDMI audio support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607072704.GA25229@mwanda

drm/stm: support runtime power management

This patch enables runtime power management (runtime PM) support for
the display controller. pm_runtime_enable() and pm_runtime_disable()
are added during ltdc load and unload respectively.
pm_runtime_get_sync() and pm_runtime_put_sync() are added for ltdc
register access.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1559550722-14091-1-git-send-email-yannick.fertre@st.com

drm/stm: ltdc: No message if probe

Print display controller hardware version in debug mode only.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1559550694-14042-1-git-send-email-yannick.fertre@st.com

drm/meson: Add support for XBGR8888 & ABGR8888 formats

Add missing XBGR8888 & ABGR8888 formats variants from the primary plane.

Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429075238.7884-1-narmstrong@baylibre.com

drm/meson: Add zpos immutable property to planes

Add immutable zpos property to primary and overlay planes to specify
the current fixed zpos position.

Fixes: f9a2348196d1 ("drm/meson: Support Overlay plane for video rendering")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429075247.7946-1-narmstrong@baylibre.com

drm/vkms: Forward timer right after drm_crtc_handle_vblank

In

commit def35e7c592616bc09be328de8795e5e624a3cf8
Author: Shayenne Moura <shayenneluzmoura@gmail.com>
Date:   Wed Jan 30 14:06:36 2019 -0200

    drm/vkms: Bugfix extra vblank frame

we fixed the vblank counter to give accurate results outside of
drm_crtc_handle_vblank, which fixed bugs around vblank timestamps
being off-by-one and causing the vblank counter to jump when it
shouldn't.

The trouble is that this completely broke crc generation. Shayenne and
Rodrigo tracked this down to the vblank timestamp going backwards in
time somehow. Which then resulted in an underflow in drm_vblank.c
code, which resulted in all kinds of things breaking really badly.

The reason for this is that once we've called drm_crtc_handle_vblank
and the hrtimer isn't forwarded yet, we're returning a vblank
timestamp in the past. This race is really hard to hit since it's
small, except when you enable crc generation: In that case there's a
call to drm_crtc_accurate_vblank right in-betwen, so we're guaranteed
to hit the bug.

The fix is to roll the hrtimer forward _before_ we do the vblank
processing (which has a side-effect of incrementing the vblank
counter), and we always subtract one frame from the hrtimer - since
now it's always one frame in the future.

To make sure we don't hit this again also add a WARN_ON checking for
whether our timestamp is somehow moving into the past, which is never
should.

This also aligns more with how real hw works:
1. first all registers are updated with the new timestamp/vblank
counter values.
2. then an interrupt is generated
3. kernel interrupt handler eventually fires.

So doing this aligns vkms closer with what drm_vblank.c expects.
Document this also in a comment.

Cc: Shayenne Moura <shayenneluzmoura@gmail.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606084404.12014-1-daniel.vetter@ffwll.ch

drm/vkms: Remove useless call to drm_connector_register/unregister()

The function vkms_output_init() is invoked during the module
initialization, and it handles the creation/configuration of the vkms
essential elements (e.g., connectors, encoder, etc). Among the
initializations, this function tries to initialize a connector and
register it by calling drm_connector_register(). However, inside the
drm_connector_register(), at the beginning of this function there is the
following validation:

 if (!connector->dev->registered)
   return 0;

In this sense, invoke drm_connector_register() after initializing the
connector has no effect because the register field is false. The
connector register happens when drm_dev_register() is invoked; the same
issue exists with drm_connector_unregister(). Therefore, this commit
removes the unnecessary call to drm_connector_register() and
drm_connector_unregister().

Changes since v2:
* Remove unnecessary call to drm_connector_unregister()
* Remove unused label

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190315161142.23gfu32lueyqrmyq@smtp.gmail.com

drm/sti: drop use of drmP.h

Stop using the deprecated drmP.h header file.
Replaced with relevant forwards or headers files.
Header files sorted in all files touched.

Build tested with allyesconfig, allmodconfig for a number of
architectures.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605134835.25112-2-sam@ravnborg.org

drm/edid: Ignore "DFP 1.x" bit for EDID 1.2 and earlier

From VESA EDID implementation guide v1.0:
"For EDID version 1 revision 2 or earlier data structures when offset 14h
 bit 7 is set to one, the value of bits 6-0 are undefined, and therefore
 cannot be interpreted to mean anything."

And since EDID 1.4 redefines that bit let's consult it only for
EDID 1.3.

Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529110204.2384-2-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>

drm/edid: Clean up DRM_EDID_DIGITAL_* flags

Give the "DFP 1.x" bit a proper name, and clean up the rest
of the bits defines as well.

Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529110204.2384-1-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>

drm: panel-orientation-quirks: Add quirk for GPD MicroPC

GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).

Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_micropc data struct may very well need to be updated
with some extra bios-dates in the future.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524125759.14131-2-hdegoede@redhat.com

drm: panel-orientation-quirks: Add quirk for GPD pocket2

GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).

Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_pocket2 data struct may very well need to be updated
with some extra bios-dates in the future.

Changes in v2:
-Add one more known BIOS date to the list of BIOS dates

Cc: Jurgen Kramer <gtmkramer@xs4all.nl>
Reported-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524125759.14131-1-hdegoede@redhat.com

drm/crc-debugfs: User irqsafe spinlock in drm_crtc_add_crc_entry

We can be called from any context, we need to be prepared.

Noticed this while hacking on vkms, which calls this function from a
normal worker. Which really upsets lockdep.

Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605194556.16744-1-daniel.vetter@ffwll.ch

drm: Ignore drm_gem_vram_mm_funcs in generated documentation

The documentation tools interpret drm_gem_vram_mm_funcs as function and
there appears to be no way of inline-documenting constants. This results
in a warning by 'make htmldocs'. For now, removing drm_gem_vram_mm_funcs
from generated documentation works around the issue.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190604111330.25324-1-tzimmermann@suse.de
Fixes: 5c9dcacfe566 ("drm: Add default instance for VRAM MM callback functions")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: Fix cache entry creation race.

virtio_gpu_cmd_get_capset would check for the existence of an entry
under lock.  If it was not found, it would unlock and call
virtio_gpu_cmd_get_capset to create a new entry.  The new entry would
be added it to the list without checking if it was added by another
task during the period where the lock was not held resulting in
duplicate entries.

Compounding this issue, virtio_gpu_cmd_capset_cb would stop iterating
after find the first matching entry.  Multiple callbacks would modify
the first entry, but any subsequent entries and their associated waiters
would eventually timeout since they don't become valid, also wasting
memory along the way.

Signed-off-by: David Riley <davidriley@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190605234423.11348-3-davidriley@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: Wake up all waiters when capset response comes in.

If multiple callers occur simultaneously, wake them all up.

Signed-off-by: David Riley <davidriley@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190605234423.11348-2-davidriley@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: Ensure cached capset entries are valid before copying.

virtio_gpu_get_caps_ioctl could return success with invalid data if a
second caller to the function occurred after the entry was created in
virtio_gpu_cmd_get_capset but prior to the virtio_gpu_cmd_capset_cb
callback being called.  This could leak contents of memory as well
since the caps_cache allocation is done without zeroing.

Signed-off-by: David Riley <davidriley@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190605234423.11348-1-davidriley@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/bridge/synopsys: dw-hdmi: Add "unwedge" for ddc bus

See the PhD thesis in the comments in this patch for details, but to
summarize this adds a hacky "unwedge" feature to the dw_hdmi i2c bus to
workaround what appears to be a hardware errata.  This relies on a
pinctrl entry to help change around muxing to perform the unwedge.

NOTE that the specific TV this was tested on was the "Samsung
UN40HU6950FXZA" and the specific port was the "STB" port.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502225336.206885-2-dianders@chromium.org

dt-bindings: drm/bridge/synopsys: dw-hdmi: Add "unwedge" for ddc bus

In certain situations it was seen that we could wedge up the DDC bus
on the HDMI adapter on rk3288.  The only way to unwedge was to mux one
of the pins over to GPIO output-driven-low temporarily and then
quickly mux back.  Full details can be found in the patch
("drm/bridge/synopsys: dw-hdmi: Add "unwedge" for ddc bus").

Since unwedge requires remuxing the pins, we first need to add to the
bindings so that we can specify what state the pins should be in for
unwedging.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502225336.206885-1-dianders@chromium.org

drm/r128: drop use of drmP.h

Drop use of the deprecated drmP.h header file.
Replace it with relevant include files.
Sort include files in files touched.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605141321.17819-3-sam@ravnborg.org

drm/r128: drop drm_os_linux dependencies

Drop use of drm_os_linux macros.

Simple 1:1 replacements of
- DRM_UDELAY
- DRM_CURRENTPID
- DRM_READ
- DRM_WRITE

With this change we do not need to introduce the deprecated
drm_os_linux.h header when we drop use of drmP.h.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605141321.17819-2-sam@ravnborg.org

drm/savage: drop use of drmP.h

Drop use of the deprecated drmP.h header file.
Replace it with the necessary includes of other headers.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605140313.13629-3-sam@ravnborg.org

drm/savage: drop use of drm_os_linux

Drop use of macros from the deprecated drm_os_linux header.
Simple 1:1 replacements of
- DRM_UDELAY
- DRM_CURRENTPID
- DRM_READ
- DRM_WRITE

With this change we do not need to introduce the deprecated
drm_os_linux.h header when we drop use of drmP.h.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605140313.13629-2-sam@ravnborg.org

drm/sis: drop drmP.h use

Drop use of the deprecated drmP.h header.
Repalced with relevant header files and sorted header files in all files
touched.

Replaced DRM_{READ,WRITE} to avoid the drm_os_linux header.

Build tested with allyesconfig, allmodconfig on various architectures.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605135539.12940-2-sam@ravnborg.org

drm/virtio: use u64_to_user_ptr macro

Other DRM drivers use it too.

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190604234428.23252-1-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/panel: truly: Add additional delay after pulling down reset gpio

MTP SDM845 panel seems to need additional delay to bring panel
to a workable state. Running modetest without this change displays
blurry artifacts.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527102616.28315-1-vivek.gautam@codeaurora.org

dma-buf: Discard old fence_excl on retrying get_fences_rcu for realloc

If we have to drop the seqcount & rcu lock to perform a krealloc, we
have to restart the loop. In doing so, be careful not to lose track of
the already acquired exclusive fence.

Fixes: fedf54132d24 ("dma-buf: Restart reservation_object_get_fences_rcu() after writes")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: stable@vger.kernel.org #v4.10
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604125323.21396-1-chris@chris-wilson.co.uk

drm/atmel-hlcdc: revert shift by 8

Revert shift by 8 of state->base.alpha. This introduced a
regression on planes.

Fixes: 7f73c10b256b ("drm/atmel-hclcdc: Convert to the new generic alpha property")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1556195748-11106-7-git-send-email-claudiu.beznea@microchip.com

drm: atmel-hlcdc: add sam9x60 LCD controller

Add the LCD controller for SAM9X60.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
[claudiu.beznea@microchip.com: add fixed_clksrc option to
 atmel_hlcdc_dc_sam9x60]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1556195748-11106-6-git-send-email-claudiu.beznea@microchip.com

drm: atmel-hlcdc: enable sys_clk during initalization.

For SAM9X60 SoC, sys_clk is through lcd_gclk clock source and this
needs to be enabled before enabling lcd_clk.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
[claudiu.beznea@microchip.com: add fixed_clksrc checks]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1556195748-11106-5-git-send-email-claudiu.beznea@microchip.com

drm: atmel-hlcdc: avoid initializing cfg with zero

Remove cfg initialization with zero and read state with
drm_crtc_state_to_atmel_hlcdc_crtc_state() so that cfg to be initialized
with state's output_mode.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1556195748-11106-3-git-send-email-claudiu.beznea@microchip.com

drm: atmel-hlcdc: add config option for clock selection

SAM9x60 LCD Controller has no option to select clock source as previous
controllers have. To be able to use the same driver even for this LCD
controller add a config option to know if controller supports this.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1556195748-11106-2-git-send-email-claudiu.beznea@microchip.com

drm: Flush output polling on shutdown

We need to mark the output polling as disabled to prevent concurrent
irqs from queuing new work as shutdown the probe -- causing that work to
execute after we have freed the structs:

<4> [341.846490] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock))
<4> [341.846497] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50
<4> [341.846508] Modules linked in: i915(-) vgem thunderbolt snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm mcs7830 btusb usbnet btrtl mii btbcm btintel bluetooth ecdh_generic ecc mei_me mei prime_numbers i2c_hid pinctrl_sunrisepoint pinctrl_intel [last unloaded: i915]
<4> [341.846546] CPU: 3 PID: 3300 Comm: i915_module_loa Tainted: G     U            5.2.0-rc2-CI-CI_DRM_6175+ #1
<4> [341.846553] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018
<4> [341.846560] RIP: 0010:mutex_destroy+0x49/0x50
<4> [341.846565] Code: 00 00 5b c3 e8 a8 9f 3b 00 85 c0 74 ed 8b 05 3e 55 23 01 85 c0 75 e3 48 c7 c6 00 d0 08 82 48 c7 c7 a8 aa 07 82 e8 e7 08 fa ff <0f> 0b eb cc 0f 1f 00 48 b8 11 11 11 11 11 11 11 11 48 89 76 20 48
<4> [341.846578] RSP: 0018:ffffc900006cfdb0 EFLAGS: 00010286
<4> [341.846583] RAX: 0000000000000000 RBX: ffff88826759a168 RCX: 0000000000000000
<4> [341.846589] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffffffff8112844c
<4> [341.846595] RBP: ffff8882708fa548 R08: 0000000000000000 R09: 0000000000039600
<4> [341.846601] R10: 0000000000000000 R11: 0000000000000ce4 R12: ffffffffa07de1e0
<4> [341.846607] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffa07de2d0
<4> [341.846613] FS:  00007f62b5ae0e40(0000) GS:ffff888276380000(0000) knlGS:0000000000000000
<4> [341.846620] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [341.846626] CR2: 000055a4e064f4a0 CR3: 0000000266b16006 CR4: 00000000003606e0
<4> [341.846632] Call Trace:
<4> [341.846639]  drm_fb_helper_fini.part.17+0xb3/0x100
<4> [341.846682]  intel_fbdev_fini+0x20/0x80 [i915]
<4> [341.846722]  intel_modeset_cleanup+0x9a/0x140 [i915]
<4> [341.846750]  i915_driver_unload+0xa3/0x100 [i915]
<4> [341.846778]  i915_pci_remove+0x19/0x30 [i915]
<4> [341.846784]  pci_device_remove+0x36/0xb0
<4> [341.846790]  device_release_driver_internal+0xd3/0x1b0
<4> [341.846795]  driver_detach+0x3f/0x80
<4> [341.846800]  bus_remove_driver+0x53/0xd0
<4> [341.846805]  pci_unregister_driver+0x25/0xa0
<4> [341.846843]  i915_exit+0x16/0x1c [i915]
<4> [341.846849]  __se_sys_delete_module+0x162/0x210
<4> [341.846855]  ? trace_hardirqs_off_thunk+0x1a/0x1c
<4> [341.846859]  ? do_syscall_64+0xd/0x1c0
<4> [341.846864]  do_syscall_64+0x55/0x1c0
<4> [341.846869]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4> [341.846875] RIP: 0033:0x7f62b51871b7
<4> [341.846881] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48
<4> [341.846897] RSP: 002b:00007ffe7a227138 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
<4> [341.846904] RAX: ffffffffffffffda RBX: 00007ffe7a2272b0 RCX: 00007f62b51871b7
<4> [341.846910] RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000557cd6b55948
<4> [341.846916] RBP: 0000557cd6b558e0 R08: 0000557cd6b5594c R09: 00007ffe7a227160
<4> [341.846922] R10: 00007ffe7a226134 R11: 0000000000000206 R12: 0000000000000000
<4> [341.846927] R13: 00007ffe7a227820 R14: 0000000000000000 R15: 0000000000000000
<4> [341.846936] irq event stamp: 3547847
<4> [341.846940] hardirqs last  enabled at (3547847): [<ffffffff819aad2c>] _raw_spin_unlock_irqrestore+0x4c/0x60
<4> [341.846949] hardirqs last disabled at (3547846): [<ffffffff819aab9d>] _raw_spin_lock_irqsave+0xd/0x50
<4> [341.846957] softirqs last  enabled at (3547376): [<ffffffff81c0033a>] __do_softirq+0x33a/0x4b9
<4> [341.846966] softirqs last disabled at (3547367): [<ffffffff810b6379>] irq_exit+0xa9/0xc0
<4> [341.846973] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50
<4> [341.846980] ---[ end trace ba94ca8952ba970e ]---
<7> [341.866547] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
<7> [341.890480] [drm:drm_add_display_info] non_desktop set to 0
<7> [341.890530] [drm:drm_add_edid_modes] ELD: no CEA Extension found
<7> [341.890537] [drm:drm_add_display_info] non_desktop set to 0
<7> [341.890578] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1] probed modes :
<7> [341.890589] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [341.890602] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<4> [341.890628] general protection fault: 0000 [#1] PREEMPT SMP PTI
<4> [341.890636] CPU: 0 PID: 508 Comm: kworker/0:4 Tainted: G     U  W         5.2.0-rc2-CI-CI_DRM_6175+ #1
<4> [341.890646] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018
<4> [341.890655] Workqueue: events output_poll_execute
<4> [341.890663] RIP: 0010:drm_setup_crtcs+0x13e/0xbe0
<4> [341.890669] Code: 00 41 8b 44 24 58 85 c0 0f 8e f9 01 00 00 44 8b 6c 24 20 44 8b 74 24 28 31 db 31 ed 49 8b 44 24 60 48 63 d5 44 89 ee 83 c5 01 <48> 8b 04 d0 44 89 f2 48 8b 38 48 8b 87 88 01 00 00 48 8b 40 20 e8
<4> [341.890686] RSP: 0018:ffffc9000033fd40 EFLAGS: 00010202
<4> [341.890692] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000002 RCX: 0000000000000000
<4> [341.890700] RDX: 0000000000000001 RSI: 0000000000000c80 RDI: 00000000ffffffff
<4> [341.890707] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
<4> [341.890715] R10: 0000000000000c80 R11: 0000000000000000 R12: ffff888267599fe8
<4> [341.890722] R13: 0000000000000c80 R14: 0000000000000708 R15: 0000000000000007
<4> [341.890730] FS:  0000000000000000(0000) GS:ffff888276200000(0000) knlGS:0000000000000000
<4> [341.890739] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [341.890745] CR2: 000055a4e064f4a0 CR3: 000000026d234003 CR4: 00000000003606f0
<4> [341.890752] Call Trace:
<4> [341.890760]  drm_fb_helper_hotplug_event.part.24+0x89/0xb0
<4> [341.890768]  drm_kms_helper_hotplug_event+0x21/0x30
<4> [341.890774]  output_poll_execute+0x9d/0x1a0
<4> [341.890782]  process_one_work+0x245/0x610
<4> [341.890790]  worker_thread+0x37/0x380
<4> [341.890796]  ? process_one_work+0x610/0x610
<4> [341.890802]  kthread+0x119/0x130
<4> [341.890808]  ? kthread_park+0x80/0x80
<4> [341.890815]  ret_from_fork+0x3a/0x50

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109964
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603135910.15979-2-chris@chris-wilson.co.uk

video/hdmi: Dropped static functions from kernel doc

Dropped static functions from kernel documentation.

v2: Dropped the comments altogether for static functions,
as the definitions seems self explanatory.

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1559567330-25182-4-git-send-email-uma.shankar@intel.com

drm: Fix docbook warnings in hdr metadata helper structures

Fixes the following warnings:
./include/drm/drm_mode_config.h:841: warning: Incorrect use of
kernel-doc format:          * hdr_output_metadata_property: Connector
property containing hdr
./include/drm/drm_mode_config.h:918: warning: Function parameter or member 'hdr_output_metadata_property' not described in 'drm_mode_config'
./include/drm/drm_connector.h:1251: warning: Function parameter or member 'hdr_output_metadata' not described in 'drm_connector'
./include/drm/drm_connector.h:1251: warning: Function parameter or member 'hdr_sink_metadata' not described in 'drm_connector'

Also adds some property documentation for HDR Metadata Connector
Property in connector property create function.

v2: Fixed Sean Paul's review comments.

v3: Fixed Daniel Vetter's review comments, added the UAPI structure
definition section in kernel docs.

v4: Fixed Daniel Vetter's review comments.

v5: Added structure member references as per Daniel's suggestion.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: "Ville Syrjä" <ville.syrjala@linux.intel.com>
Cc: Hans Verkuil <hansverk@cisco.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Reviewed-by: Sean Paul <sean@poorly.run> (v1)
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
[danvet: Fix up markup: () for functions, & for structs. Style guide
also recommends to prepend struct for structures.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1559647022-7336-1-git-send-email-uma.shankar@intel.com

drm: ADD UAPI structure definition section in kernel doc

Add a new section for UAPI structure and helper definitions
in kernel docbook.

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1559567330-25182-2-git-send-email-uma.shankar@intel.com

drm/fb-helper: Remove drm_fb_helper_crtc

struct drm_fb_helper_crtc is now just a wrapper around drm_mode_set so
use that directly instead and attach it as a modeset array onto
drm_client_dev. drm_fb_helper will use this array to store its modesets
which means it will always initialize a drm_client, but it will not
register the client (callbacks) unless it's the generic fbdev emulation.

Code will later be moved to drm_client, so add code there in a new file
drm_client_modeset.c with MIT license to match drm_fb_helper.c.

The modeset connector array size is hardcoded for the cloned case to avoid
having to pass in a value from the driver. A value of 8 is chosen to err
on the safe side. This means that the max connector argument for
drm_fb_helper_init() and drm_fb_helper_fbdev_setup() isn't used anymore,
a todo entry for this is added.

In pan_display_atomic() restore_fbdev_mode_force() is used instead of
restore_fbdev_mode_atomic() because that one will later become internal
to drm_client_modeset.

Locking order:
1. drm_fb_helper->lock
2. drm_master_internal_acquire
3. drm_client_dev->modeset_mutex

v6: Improve commit message (Sam Ravnborg)

v3:
- Use full drm_client_init/release for the modesets (Daniel Vetter)
- drm_client_for_each_modeset: use lockdep_assert_held (Daniel Vetter)
- Hook up to Documentation/gpu/drm-client.rst (Daniel Vetter)

v2:
- Add modesets array to drm_client (Daniel Vetter)
- Use a new file for the modeset code (Daniel Vetter)
- File has to be MIT licensed (Emmanuel Vadot)
- Add copyrights from drm_fb_helper.c

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531140117.37751-3-noralf@tronnes.org

drm/docs: More links for implicit/explicit fencing.

drm_atomic_set_fence_for_plane() contains the main discussion from a
driver pov, link to that from more places.

Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603142848.26487-1-daniel.vetter@ffwll.ch

drm/amd/display: Only force modesets when toggling HDR

[Why]
We can issue HDR static metadata as part of stream updates for
non-modesets as long as we force a modeset when entering or exiting HDR.

This avoids unnecessary blanking for simple metadata updates.

[How]
When changing scaling and abm for the stream also check if HDR has
changed and send the stream update. This will only happen in non-modeset
cases.

Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528190836.10738-3-nicholas.kazlauskas@amd.com

drm/amd/display: Expose HDR output metadata for supported connectors

[Why]
For userspace to send static HDR metadata to the display we need to
attach the property on the connector and send it to DC.

[How]
The property is attached to HDMI and DP connectors. Since the metadata
isn't actually available when creating the connector this isn't a
property we can dynamically support based on the extension block
being available or not.

When the HDR metadata is changed a modeset will be forced for now.
We need to switch from 8bpc to 10bpc in most cases anyway, and we want
to fully exit HDR mode when userspace gives us a NULL metadata, so this
isn't completely unnecessary.

The requirement can later be reduced to just entering and exiting HDR
or switching max bpc.

Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528190836.10738-2-nicholas.kazlauskas@amd.com

drm: Fixed doc warnings in drm uapi header

Fixed doc warnings in drm uapi header. All the UAPI
structures are now documented in kernel doc.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1559159944-21103-4-git-send-email-uma.shankar@intel.com

drm: Drop a redundant unused variable

Drop a redundant and unused variable "hdr_output_metadata" from
drm_connector.

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1559159944-21103-2-git-send-email-uma.shankar@intel.com

drm/doc: More fine-tuning on userspace review requirements

With Eric's patch

commit ba6e798ecf320716780bb6a6088a8d17dcba1d49
Author: Eric Anholt <eric@anholt.net>
Date:   Wed Apr 24 11:56:17 2019 -0700

    drm/doc: Document expectation that userspace review looks at kernel uAPI.

there's been concerns raised that we expect userspace people to do
in-depth kernel patch review. That's not reasonable, same way kernel
people can't review all the userspace we have. Try to clarify
expectations a bit more.

Cc: Eric Anholt <eric@anholt.net>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: contact@emersion.fr
Cc: wayland-devel@lists.freedesktop.org
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521084849.27452-1-daniel.vetter@ffwll.ch

drm/bridge: sii902x: Implement HDMI audio support

Implement HDMI audio support by using ASoC HDMI codec. The commit
implements the necessary callbacks and configuration for the HDMI
codec and registers a virtual platform device for the codec to attach.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ef6895d016554b1e0c8b388d4993bcd6a3699341.1558964241.git.jsarha@ti.com

dt-bindings: display: sii902x: Add HDMI audio bindings

The sii902x chip family supports also HDMI audio. Add binding for
describing the necessary i2s and mclk wiring for it.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f790277fabc45f987f90075dd842368705226a84.1558964241.git.jsarha@ti.com