mm: reuse DEFINE_SHOW_ATTRIBUTE() macro

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

[andriy.shevchenko@linux.intel.com: add tags, fix compilation issue]
Link: http://lkml.kernel.org/r/20180217144253.58604-1-andriy.shevchenko@linux.intel.com
Link: http://lkml.kernel.org/r/20180214154644.54505-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dennis Zhou <dennisszhou@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, page_alloc: move mirrored_kernelcore to __meminitdata

mirrored_kernelcore can be in __meminitdata, so move it there.

At the same time, fixup section specifiers to be after the name of the
variable per checkpatch.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1802121623280.179479@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, page_alloc: extend kernelcore and movablecore for percent

Both kernelcore= and movablecore= can be used to define the amount of
ZONE_NORMAL and ZONE_MOVABLE on a system, respectively.  This requires
the system memory capacity to be known when specifying the command line,
however.

This introduces the ability to define both kernelcore= and movablecore=
as a percentage of total system memory.  This is convenient for systems
software that wants to define the amount of ZONE_MOVABLE, for example,
as a proportion of a system's memory rather than a hardcoded byte value.

To define the percentage, the final character of the parameter should be
a '%'.

mhocko: "why is anyone using these options nowadays?"

rientjes:
:
: Fragmentation of non-__GFP_MOVABLE pages due to low on memory
: situations can pollute most pageblocks on the system, as much as 1GB of
: slab being fragmented over 128GB of memory, for example.  When the
: amount of kernel memory is well bounded for certain systems, it is
: better to aggressively reclaim from existing MIGRATE_UNMOVABLE
: pageblocks rather than eagerly fallback to others.
:
: We have additional patches that help with this fragmentation if you're
: interested, specifically kcompactd compaction of MIGRATE_UNMOVABLE
: pageblocks triggered by fallback of non-__GFP_MOVABLE allocations and
: draining of pcp lists back to the zone free area to prevent stranding.

[rientjes@google.com: updates]
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1802131700160.71590@chino.kir.corp.google.com
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1802121622470.179479@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: hwpoison: disable memory error handling on 1GB hugepage

Recently the following BUG was reported:

    Injecting memory failure for pfn 0x3c0000 at process virtual address 0x7fe300000000
    Memory failure: 0x3c0000: recovery action for huge page: Recovered
    BUG: unable to handle kernel paging request at ffff8dfcc0003000
    IP: gup_pgd_range+0x1f0/0xc20
    PGD 17ae72067 P4D 17ae72067 PUD 0
    Oops: 0000 [#1] SMP PTI
    ...
    CPU: 3 PID: 5467 Comm: hugetlb_1gb Not tainted 4.15.0-rc8-mm1-abc+ #3
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014

You can easily reproduce this by calling madvise(MADV_HWPOISON) twice on
a 1GB hugepage.  This happens because get_user_pages_fast() is not aware
of a migration entry on pud that was created in the 1st madvise() event.

I think that conversion to pud-aligned migration entry is working, but
other MM code walking over page table isn't prepared for it.  We need
some time and effort to make all this work properly, so this patch
avoids the reported bug by just disabling error handling for 1GB
hugepage.

[n-horiguchi@ah.jp.nec.com: v2]
Link: http://lkml.kernel.org/r/1517284444-18149-1-git-send-email-n-horiguchi@ah.jp.nec.com
Link: http://lkml.kernel.org/r/1517207283-15769-1-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: optimize memory hotplug

During memory hotplugging we traverse struct pages three times:

1. memset(0) in sparse_add_one_section()
2. loop in __add_section() to set do: set_page_node(page, nid); and
   SetPageReserved(page);
3. loop in memmap_init_zone() to call __init_single_pfn()

This patch removes the first two loops, and leaves only loop 3.  All
struct pages are initialized in one place, the same as it is done during
boot.

The benefits:

 - We improve memory hotplug performance because we are not evicting the
   cache several times and also reduce loop branching overhead.

 - Remove condition from hotpath in __init_single_pfn(), that was added
   in order to fix the problem that was reported by Bharata in the above
   email thread, thus also improve performance during normal boot.

 - Make memory hotplug more similar to the boot memory initialization
   path because we zero and initialize struct pages only in one
   function.

 - Simplifies memory hotplug struct page initialization code, and thus
   enables future improvements, such as multi-threading the
   initialization of struct pages in order to improve hotplug
   performance even further on larger machines.

[pasha.tatashin@oracle.com: v5]
Link: http://lkml.kernel.org/r/20180228030308.1116-7-pasha.tatashin@oracle.com
Link: http://lkml.kernel.org/r/20180215165920.8570-7-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: don't read nid from struct page during hotplug

During memory hotplugging the probe routine will leave struct pages
uninitialized, the same as it is currently done during boot.  Therefore,
we do not want to access the inside of struct pages before
__init_single_page() is called during onlining.

Because during hotplug we know that pages in one memory block belong to
the same numa node, we can skip the checking.  We should keep checking
for the boot case.

[pasha.tatashin@oracle.com: s/register_new_memory()/hotplug_memory_register()]
Link: http://lkml.kernel.org/r/20180228030308.1116-6-pasha.tatashin@oracle.com
Link: http://lkml.kernel.org/r/20180215165920.8570-6-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: optimize probe routine

When memory is hotplugged pages_correctly_reserved() is called to verify
that the added memory is present, this routine traverses through every
struct page and verifies that PageReserved() is set.  This is a slow
operation especially if a large amount of memory is added.

Instead of checking every page, it is enough to simply check that the
section is present, has mapping (struct page array is allocated), and
the mapping is online.

In addition, we should not excpect that probe routine sets flags in
struct page, as the struct pages have not yet been initialized.  The
initialization should be done in __init_single_page(), the same as
during boot.

Link: http://lkml.kernel.org/r/20180215165920.8570-5-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: uninitialized struct page poisoning sanity checking

During boot we poison struct page memory in order to ensure that no one
is accessing this memory until the struct pages are initialized in
__init_single_page().

This patch adds more scrutiny to this checking by making sure that flags
do not equal the poison pattern when they are accessed.  The pattern is
all ones.

Since node id is also stored in struct page, and may be accessed quite
early, we add this enforcement into page_to_nid() function as well.
Note, this is applicable only when NODE_NOT_IN_PAGE_FLAGS=n

[pasha.tatashin@oracle.com: v4]
Link: http://lkml.kernel.org/r/20180215165920.8570-4-pasha.tatashin@oracle.com
Link: http://lkml.kernel.org/r/20180213193159.14606-4-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/mm/memory_hotplug: determine block size based on the end of boot memory

Memory sections are combined into "memory block" chunks.  These chunks
are the units upon which memory can be added and removed.

On x86, the new memory may be added after the end of the boot memory,
therefore, if block size does not align with end of boot memory, memory
hot-plugging/hot-removing can be broken.

Memory sections are combined into "memory block" chunks.  These chunks
are the units upon which memory can be added and removed.

On x86 the new memory may be added after the end of the boot memory,
therefore, if block size does not align with end of boot memory, memory
hotplugging/hotremoving can be broken.

Currently, whenever machine is booted with more than 64G the block size
is unconditionally increased to 2G from the base 128M.  This is done in
order to reduce number of memory device files in sysfs:

/sys/devices/system/memory/memoryXXX

We must use the largest allowed block size that aligns to the next
address to be able to hotplug the next block of memory.

So, when memory is larger or equal to 64G, we check the end address and
find the largest block size that is still power of two but smaller or
equal to 2G.

Before, the fix:
Run qemu with:
-m 64G,slots=2,maxmem=66G -object memory-backend-ram,id=mem1,size=2G

(qemu) device_add pc-dimm,id=dimm1,memdev=mem1
Block size [0x80000000] unaligned hotplug range: start 0x1040000000,
size 0x80000000
acpi PNP0C80:00: add_memory failed
acpi PNP0C80:00: acpi_memory_enable_device() error
acpi PNP0C80:00: Enumeration failure

With the fix memory is added successfully as the block size is set to
1G, and therefore aligns with start address 0x1040000000.

[pasha.tatashin@oracle.com: v4]
Link: http://lkml.kernel.org/r/20180215165920.8570-3-pasha.tatashin@oracle.com
Link: http://lkml.kernel.org/r/20180213193159.14606-3-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: enforce block size aligned range check

Patch series "optimize memory hotplug", v3.

This patchset:

 - Improves hotplug performance by eliminating a number of struct page
   traverses during memory hotplug.

 - Fixes some issues with hotplugging, where boundaries were not
   properly checked. And on x86 block size was not properly aligned with
   end of memory

 - Also, potentially improves boot performance by eliminating condition
   from __init_single_page().

 - Adds robustness by verifying that that struct pages are correctly
   poisoned when flags are accessed.

The following experiments were performed on Xeon(R) CPU E7-8895 v3 @
2.60GHz with 1T RAM:

booting in qemu with 960G of memory, time to initialize struct pages:

no-kvm:
TRY1 TRY2
BEFORE: 39.433668 39.39705
AFTER: 36.903781 36.989329

with-kvm:
BEFORE: 10.977447 11.103164
AFTER: 10.929072 10.751885

Hotplug 896G memory:
no-kvm:
TRY1 TRY2
BEFORE: 848.740000 846.910000
AFTER:  783.070000 786.560000

with-kvm:
TRY1 TRY2
BEFORE: 34.410000 33.57
AFTER: 29.810000 29.580000

This patch (of 6):

Start qemu with the following arguments:

  -m 64G,slots=2,maxmem=66G -object memory-backend-ram,id=mem1,size=2G

Which: boots machine with 64G, and adds a device mem1 with 2G which can
be hotplugged later.

Also make sure that config has the following turned on:
  CONFIG_MEMORY_HOTPLUG
  CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE
  CONFIG_ACPI_HOTPLUG_MEMORY

Using the qemu monitor hotplug the memory (make sure config has (qemu)
device_add pc-dimm,id=dimm1,memdev=mem1

The operation will fail with the following trace:

    WARNING: CPU: 0 PID: 91 at drivers/base/memory.c:205
    pages_correctly_reserved+0xe6/0x110
    Modules linked in:
    CPU: 0 PID: 91 Comm: systemd-udevd Not tainted 4.16.0-rc1_pt_master #29
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
    BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
    RIP: 0010:pages_correctly_reserved+0xe6/0x110
    Call Trace:
     memory_subsys_online+0x44/0xa0
     device_online+0x51/0x80
     store_mem_state+0x5e/0xe0
     kernfs_fop_write+0xfa/0x170
     __vfs_write+0x2e/0x150
     vfs_write+0xa8/0x1a0
     SyS_write+0x4d/0xb0
     do_syscall_64+0x5d/0x110
     entry_SYSCALL_64_after_hwframe+0x21/0x86
    ---[ end trace 6203bc4f1a5d30e8 ]---

The problem is detected in: drivers/base/memory.c

   static bool pages_correctly_reserved(unsigned long start_pfn)
   205                 if (WARN_ON_ONCE(!pfn_valid(pfn)))

This function loops through every section in the newly added memory
block and verifies that the first pfn is valid, meaning section exists,
has mapping (struct page array), and is online.

The block size on x86 is usually 128M, but when machine is booted with
more than 64G of memory, the block size is changed to 2G: $ cat
/sys/devices/system/memory/block_size_bytes 80000000

or

   $ dmesg | grep "block size"
   [    0.086469] x86/mm: Memory block size: 2048MB

During memory hotplug, and hotremove we verify that the range is section
size aligned, but we actually must verify that it is block size aligned,
because that is the proper unit for hotplug operations.  See:
Documentation/memory-hotplug.txt

So, when the start_pfn of newly added memory is not block size aligned,
we can get a memory block that has only part of it with properly
populated sections.

In our case the start_pfn starts from the last_pfn (end of physical
memory).

   $ dmesg | grep last_pfn
   [    0.000000] e820: last_pfn = 0x1040000 max_arch_pfn = 0x400000000

0x1040000 == 65G, and so is not 2G aligned!

The fix is to enforce that memory that is hotplugged and hotremoved is
block size aligned.

With this fix, running the above sequence yield to the following result:

   (qemu) device_add pc-dimm,id=dimm1,memdev=mem1
   Block size [0x80000000] unaligned hotplug range: start 0x1040000000,
    size 0x80000000
   acpi PNP0C80:00: add_memory failed
   acpi PNP0C80:00: acpi_memory_enable_device() error
   acpi PNP0C80:00: Enumeration failure

Link: http://lkml.kernel.org/r/20180213193159.14606-2-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: thp: fix potential clearing to referenced flag in page_idle_clear_pte_refs_one()

For PTE-mapped THP, the compound THP has not been split to normal 4K
pages yet, the whole THP is considered referenced if any one of sub page
is referenced.

When walking PTE-mapped THP by pvmw, all relevant PTEs will be checked
to retrieve referenced bit.  But, the current code just returns the
result of the last PTE.  If the last PTE has not referenced, the
referenced flag will be cleared.

Just set referenced when ptep{pmdp}_clear_young_notify() returns true.

Link: http://lkml.kernel.org/r/1518212451-87134-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Gang Deng <gavin.dg@linux.alibaba.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: initialize pages on demand during boot

Deferred page initialization allows the boot cpu to initialize a small
subset of the system's pages early in boot, with other cpus doing the
rest later on.

It is, however, problematic to know how many pages the kernel needs
during boot.  Different modules and kernel parameters may change the
requirement, so the boot cpu either initializes too many pages or runs
out of memory.

To fix that, initialize early pages on demand.  This ensures the kernel
does the minimum amount of work to initialize pages during boot and
leaves the rest to be divided in the multithreaded initialization path
(deferred_init_memmap).

The on-demand code is permanently disabled using static branching once
deferred pages are initialized.  After the static branch is changed to
false, the overhead is up-to two branch-always instructions if the zone
watermark check fails or if rmqueue fails.

Sergey Senozhatsky noticed that while deferred pages currently make
sense only on NUMA machines (we start one thread per latency node),
CONFIG_NUMA is not a requirement for CONFIG_DEFERRED_STRUCT_PAGE_INIT,
so that is also must be addressed in the patch.

[akpm@linux-foundation.org: fix typo in comment, make deferred_pages static]
[pasha.tatashin@oracle.com: fix min() type mismatch warning]
Link: http://lkml.kernel.org/r/20180212164543.26592-1-pasha.tatashin@oracle.com
[pasha.tatashin@oracle.com: use zone_to_nid() in deferred_grow_zone()]
Link: http://lkml.kernel.org/r/20180214163343.21234-2-pasha.tatashin@oracle.com
[pasha.tatashin@oracle.com: might_sleep warning]
Link: http://lkml.kernel.org/r/20180306192022.28289-1-pasha.tatashin@oracle.com
[akpm@linux-foundation.org: s/spin_lock/spin_lock_irq/ in page_alloc_init_late()]
[pasha.tatashin@oracle.com: v5]
Link: http://lkml.kernel.org/r/20180309220807.24961-3-pasha.tatashin@oracle.com
[akpm@linux-foundation.org: tweak comments]
[pasha.tatashin@oracle.com: v6]
Link: http://lkml.kernel.org/r/20180313182355.17669-3-pasha.tatashin@oracle.com
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20180209192216.20509-2-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Gioh Kim <gi-oh.kim@profitbricks.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Miles Chen <miles.chen@mediatek.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: disable interrupts while initializing deferred pages

Vlastimil Babka reported about a window issue during which when deferred
pages are initialized, and the current version of on-demand
initialization is finished, allocations may fail.  While this is highly
unlikely scenario, since this kind of allocation request must be large,
and must come from interrupt handler, we still want to cover it.

We solve this by initializing deferred pages with interrupts disabled,
and holding node_size_lock spin lock while pages in the node are being
initialized.  The on-demand deferred page initialization that comes
later will use the same lock, and thus synchronize with
deferred_init_memmap().

It is unlikely for threads that initialize deferred pages to be
interrupted.  They run soon after smp_init(), but before modules are
initialized, and long before user space programs.  This is why there is
no adverse effect of having these threads running with interrupts
disabled.

[pasha.tatashin@oracle.com: v6]
Link: http://lkml.kernel.org/r/20180313182355.17669-2-pasha.tatashin@oracle.com
Link: http://lkml.kernel.org/r/20180309220807.24961-2-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Gioh Kim <gi-oh.kim@profitbricks.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Miles Chen <miles.chen@mediatek.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/swap_slots.c: use conditional compilation

For mm/swap_slots.c, use the traditional Linux method of conditional
compilation and linking instead of always compiling it by using #ifdef
CONFIG_SWAP and #endif for the entire source file (excluding header
files).

Link: http://lkml.kernel.org/r/c2a47015-0b5a-d0d9-8bc7-9984c049df20@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/migrate: rename migration reason MR_CMA to MR_CONTIG_RANGE

alloc_contig_range() initiates compaction and eventual migration for the
purpose of either CMA or HugeTLB allocations.  At present, the reason
code remains the same MR_CMA for either of these cases.  Let's make it
MR_CONTIG_RANGE which will appropriately reflect the reason code in both
these cases.

Link: http://lkml.kernel.org/r/20180202091518.18798-1-khandual@linux.vnet.ibm.com
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: always print RLIMIT_DATA warning

The documentation for ignore_rlimit_data says that it will print a
warning at first misuse.  Yet it doesn't seem to do that.

Fix the code to print the warning even when we allow the process to
continue.

Link: http://lkml.kernel.org/r/1517935505-9321-1-git-send-email-dwmw@amazon.co.uk
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/ksm.c: make stable_node_dup() static

stable_node_dup() is local to the source and does not need to be in
global scope, so make it static.

Cleans up sparse warning:

  mm/ksm.c:1321:13: warning: symbol 'stable_node_dup' was not declared. Should it be static?

Link: http://lkml.kernel.org/r/20180206221005.12642-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab, slub: skip unnecessary kasan_cache_shutdown()

The kasan quarantine is designed to delay freeing slab objects to catch
use-after-free.  The quarantine can be large (several percent of machine
memory size).  When kmem_caches are deleted related objects are flushed
from the quarantine but this requires scanning the entire quarantine
which can be very slow.  We have seen the kernel busily working on this
while holding slab_mutex and badly affecting cache_reaper, slabinfo
readers and memcg kmem cache creations.

It can easily reproduced by following script:

yes . | head -1000000 | xargs stat > /dev/null
for i in `seq 1 10`; do
seq 500 | (cd /cg/memory && xargs mkdir)
seq 500 | xargs -I{} sh -c 'echo $BASHPID > \
/cg/memory/{}/tasks && exec stat .' > /dev/null
seq 500 | (cd /cg/memory && xargs rmdir)
done

The busy stack:
    kasan_cache_shutdown
    shutdown_cache
    memcg_destroy_kmem_caches
    mem_cgroup_css_free
    css_free_rwork_fn
    process_one_work
    worker_thread
    kthread
    ret_from_fork

This patch is based on the observation that if the kmem_cache to be
destroyed is empty then there should not be any objects of this cache in
the quarantine.

Without the patch the script got stuck for couple of hours.  With the
patch the script completed within a second.

Link: http://lkml.kernel.org/r/20180327230603.54721-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/slab_common.c: remove test if cache name is accessible

Since commit db265eca7700 ("mm/sl[aou]b: Move duping of slab name to
slab_common.c"), the kernel always duplicates the slab cache name when
creating a slab cache, so the test if the slab name is accessible is
useless.

Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1803231133310.22626@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab, slub: remove size disparity on debug kernel

I have noticed on debug kernel with SLAB, the size of some non-root
slabs were larger than their corresponding root slabs.

e.g. for radix_tree_node:
  $cat /proc/slabinfo | grep radix
  name     <active_objs> <num_objs> <objsize> <objperslab> <pagesperslab> ...
  radix_tree_node 15052    15075      4096         1             1 ...

  $cat /cgroup/memory/temp/memory.kmem.slabinfo | grep radix
  name     <active_objs> <num_objs> <objsize> <objperslab> <pagesperslab> ...
  radix_tree_node 1581      158       4120         1             2 ...

However for SLUB in debug kernel, the sizes were same.  On further
inspection it is found that SLUB always use kmem_cache.object_size to
measure the kmem_cache.size while SLAB use the given kmem_cache.size.
In the debug kernel the slab's size can be larger than its object_size.
Thus in the creation of non-root slab, the SLAB uses the root's size as
base to calculate the non-root slab's size and thus non-root slab's size
can be larger than the root slab's size.  For SLUB, the non-root slab's
size is measured based on the root's object_size and thus the size will
remain same for root and non-root slab.

This patch makes slab's object_size the default base to measure the
slab's size.

Link: http://lkml.kernel.org/r/20180313165428.58699-1-shakeelb@google.com
Fixes: 794b1248be4e ("memcg, slab: separate memcg vs root cache creation paths")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab: use 32-bit arithmetic in freelist_randomize()

SLAB doesn't support 4GB+ of objects per slab, therefore randomization
doesn't need size_t.

Link: http://lkml.kernel.org/r/20180305200730.15812-25-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make size_from_object() return unsigned int

Function returns size of the object without red zone which can't be
negative.

Link: http://lkml.kernel.org/r/20180305200730.15812-24-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make struct kmem_cache_order_objects::x unsigned int

struct kmem_cache_order_objects is for mixing order and number of
objects, and orders aren't big enough to warrant 64-bit width.

Propagate unsignedness down so that everything fits.

!!! Patch assumes that "PAGE_SIZE << order" doesn't overflow. !!!

Link: http://lkml.kernel.org/r/20180305200730.15812-23-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make slab_index() return unsigned int

slab_index() returns index of an object within a slab which is at most
u15 (or u16?).

Iterators additionally guarantee that "p >= addr".

Link: http://lkml.kernel.org/r/20180305200730.15812-22-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab: make usercopy region 32-bit

If kmem case sizes are 32-bit, then usecopy region should be too.

Link: http://lkml.kernel.org/r/20180305200730.15812-21-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: make kasan_cache_create() work with 32-bit slab cache sizes

If SLAB doesn't support 4GB+ kmem caches (it never did), KASAN should
not do it as well.

Link: http://lkml.kernel.org/r/20180305200730.15812-20-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab: make kmem_cache_flags accept 32-bit object size

Now that all sizes are properly typed, propagate "unsigned int" down the
callgraph.

Link: http://lkml.kernel.org/r/20180305200730.15812-19-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make ->size unsigned int

Linux doesn't support negative length objects (including meta data).

Link: http://lkml.kernel.org/r/20180305200730.15812-18-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make ->object_size unsigned int

Linux doesn't support negative length objects.

Link: http://lkml.kernel.org/r/20180305200730.15812-17-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make ->offset unsigned int

->offset is free pointer offset from the start of the object, can't be
negative.

Link: http://lkml.kernel.org/r/20180305200730.15812-16-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make ->cpu_partial unsigned int

/*
 * cpu_partial determined the maximum number of objects
 * kept in the per cpu partial lists of a processor.
 */

Can't be negative.

Link: http://lkml.kernel.org/r/20180305200730.15812-15-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make ->inuse unsigned int

->inuse is "the number of bytes in actual use by the object",
can't be negative.

Link: http://lkml.kernel.org/r/20180305200730.15812-14-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make ->align unsigned int

Kmem cache alignment can't be negative.

Link: http://lkml.kernel.org/r/20180305200730.15812-13-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make ->reserved unsigned int

->reserved is either 0 or sizeof(struct rcu_head), can't be negative.

Link: http://lkml.kernel.org/r/20180305200730.15812-12-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make ->red_left_pad unsigned int

Padding length can't be negative.

Link: http://lkml.kernel.org/r/20180305200730.15812-11-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make ->max_attr_size unsigned int

->max_attr_size is maximum length of every SLAB memcg attribute
ever written. VFS limits those to INT_MAX.

Link: http://lkml.kernel.org/r/20180305200730.15812-10-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make ->remote_node_defrag_ratio unsigned int

->remote_node_defrag_ratio is in range 0..1000.

This also adds a check and modifies the behavior to return an error
code.  Before this patch invalid values were ignored.

Link: http://lkml.kernel.org/r/20180305200730.15812-9-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab: make size_index_elem() unsigned int

size_index_elem() always works with small sizes (kmalloc caches are
32-bit) and returns small indexes.

Link: http://lkml.kernel.org/r/20180305200730.15812-8-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab: make size_index[] array u8

All those small numbers are reverse indexes into kmalloc caches array
and can't be negative.

On x86_64 "unsigned int = fls()" can drop CDQE instruction:

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-2 (-2)
Function                                     old     new   delta
kmalloc_slab                                 101      99      -2

Link: http://lkml.kernel.org/r/20180305200730.15812-7-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab: make kmem_cache_create() work with 32-bit sizes

struct kmem_cache::size and ::align were always 32-bit.

Out of curiosity I created 4GB kmem_cache, it oopsed with division by 0.
kmem_cache_create(1UL<<32+1) created 1-byte cache as expected.

size_t doesn't work and never did.

Link: http://lkml.kernel.org/r/20180305200730.15812-6-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab: make create_boot_cache() work with 32-bit sizes

struct kmem_cache::size has always been "int", all those
"size_t size" are fake.

Link: http://lkml.kernel.org/r/20180305200730.15812-5-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab: make create_kmalloc_cache() work with 32-bit sizes

KMALLOC_MAX_CACHE_SIZE is 32-bit so is the largest kmalloc cache size.

Christoph said:
:
: Ok SLABs maximum allocation size is limited to 32M (see
: include/linux/slab.h:
:
: #define KMALLOC_SHIFT_HIGH      ((MAX_ORDER + PAGE_SHIFT - 1) <= 25 ? \
:                                 (MAX_ORDER + PAGE_SHIFT - 1) : 25)
:
: And SLUB/SLOB pass all larger requests to the page allocator anyways.

Link: http://lkml.kernel.org/r/20180305200730.15812-4-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab: make kmalloc_size() return "unsigned int"

kmalloc_size() derives size of kmalloc cache from internal index, which
can't be negative.

Propagate unsignedness a bit.

Link: http://lkml.kernel.org/r/20180305200730.15812-3-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab: make kmalloc_index() return "unsigned int"

kmalloc_index() return index into an array of kmalloc kmem caches,
therefore should be unsigned.

Space savings with SLUB on trimmed down .config:

add/remove: 0/1 grow/shrink: 6/56 up/down: 85/-557 (-472)
Function                                     old     new   delta
calculate_sizes                              924     983     +59
on_freelist                                  589     604     +15
init_cache_random_seq                        122     127      +5
ext4_mb_init                                1206    1210      +4
slab_pad_check.part                          270     271      +1
cpu_partial_store                            112     113      +1
usersize_show                                 28      27      -1
...
new_slab                                    1871    1837     -34
slab_order                                   204       -    -204

This patch start a series of converting SLUB (mostly) to "unsigned int".

1) Most integers in the code are in fact unsigned entities: array
   indexes, lengths, buffer sizes, allocation orders. It is therefore
   better to use unsigned variables

2) Some integers in the code are either "size_t" or "unsigned long" for
   no reason.

   size_t usually comes from people trying to maintain type correctness
   and figuring out that "sizeof" operator returns size_t or
   memset/memcpy takes size_t so should everything passed to it.

   However the number of 4GB+ objects in the kernel is very small. Most,
   if not all, dynamically allocated objects with kmalloc() or
   kmem_cache_create() aren't actually big. Maintaining wide types
   doesn't do anything.

   64-bit ops are bigger than 32-bit on our beloved x86_64,
   so try to not use 64-bit where it isn't necessary
   (read: everywhere where integers are integers not pointers)

3) in case of SLAB allocators, there are additional limitations
   *) page->inuse, page->objects are only 16-/15-bit,
   *) cache size was always 32-bit
   *) slab orders are small, order 20 is needed to go 64-bit on x86_64
      (PAGE_SIZE << order)

Basically everything is 32-bit except kmalloc(1ULL<<32) which gets
shortcut through page allocator.

Christoph said:
:
: That changes with large base page size on power and ARM64 f.e. but then
: we do not want to encourage larger allocations through slab anyways.

Link: http://lkml.kernel.org/r/20180305200730.15812-2-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slab: fixup calculate_alignment() argument type

Link: http://lkml.kernel.org/r/20180305200730.15812-1-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/slub.c: use jitter-free reference while printing age

When SLUB_DEBUG catches some issues, it prints all the required debug
info.  However, in a few cases where allocation and free of the object
has happened in a very short time, 'age' might be misleading.  See the
example below:

  =============================================================================
  BUG kmalloc-256 (Tainted: G        W  O   ): Poison overwritten
  -----------------------------------------------------------------------------
  ...
  INFO: Allocated in binder_transaction+0x4b0/0x2448 age=731 cpu=3 pid=5314
  ...
  INFO: Freed in binder_free_transaction+0x2c/0x58 age=735 cpu=6 pid=2079
  ...
  Object fffffff14956a870: 6b 6b 6b 6b 6b 6b 6b 6b 67 6b 6b 6b 6b 6b 6b a5  kkkkkkkkgkkkk

In this case, object got freed later but 'age' shows otherwise.  This
could be because, while printing this info, we print allocation traces
first and free traces thereafter.  In between, if we get schedule out or
jiffies increment, (jiffies - t->when) could become meaningless.

Use the jitter free reference to calculate age.

New output will exactly be same.  'age' is still staying with single
jiffies ref in both prints.

Change-Id: I0846565807a4229748649bbecb1ffb743d71fcd8
Link: http://lkml.kernel.org/r/1520492010-19389-1-git-send-email-cpandya@codeaurora.org
Signed-off-by: Chintan Pandya <cpandya@codeaurora.org>
Acked-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/slab_common.c: mark kmalloc machinery as __ro_after_init

kmalloc caches aren't relocated after being set up neither does
"size_index" array.

Link: http://lkml.kernel.org/r/20180226203519.GA6886@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: don't flush pagecache when expanding block device

When changing the size of a block device, its all caches are freed.
It's necessary on shrinking to prevent spurious I/Os to the disappeared
region.  However, on expanding, such kind of I/Os doesn't happen.

Similar things can be considered for btrfs filesystem resize and
resize2fs, but they are designed not to drop caches when expanding.
Therefore this patch removes unnecessary cache drop.

Link: http://lkml.kernel.org/r/1521457240-153390-1-git-send-email-shunki-fujita@cybozu.co.jp
Signed-off-by: Shunki Fujita <shunki-fujita@cybozu.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

net/9p/client.c: fix potential refcnt problem of trans module

When specifying trans_mod multiple times in a mount, it will cause an
inaccurate refcount of the trans module.  Also, in the error case of
option parsing, we should put the trans module if we have already got
it.

Link: http://lkml.kernel.org/r/1522154942-57339-1-git-send-email-cgxu519@gmx.com
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/9p: don't set SB_NOATIME by default

When the user uses some syscall, for example mmap(v9fs_file_mmap), it
will not update atime even if user's was set mnt_flags without
MNT_NOATIME, because v9fs defaults to settine SB_NOATIME in
v9fs_set_super.

For supporting access time updating when the user mounts with relatime,
we should not set SB_NOATIME by default.

Link: http://lkml.kernel.org/r/5AB9A377.6080906@huawei.com
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9p: check memory allocation result for cachetag

Check memory allocation result for cachetag in mount option parsing and
fix potential memory leak in the error case.

Link: http://lkml.kernel.org/r/1521614889-73446-1-git-send-email-cgxu519@gmx.com
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: <v9fs-developer@lists.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9p: don't maintain dir i_nlink if the exported fs doesn't either

If the exported filesystem dir on 9p server doesn't maintain accurate
i_nlink count, e.g.  always reports i_nlink as 1, then 9p should not
maintain nlink count either, otherwise drop_link would report warning
with i_nlink being zero.

For example:

 - overlayfs sets nlink to 1 for merged dir

 - ext4 (with dir_nlink feature enabled) sets nlink to 1 if a dir has
   more than EXT4_LINK_MAX (65000) links.

In this case, everytime a stat(2) call (getattr) on such exported dirs
on 9p client side, the i_nlink gets reset to 1, then operations like
rmdir(2), unlink(2) and rename(2) would cause the dir nlink to go to
zero (then negative), which results in warnings in drop_nlink() and/or
inc_nlink() calls.

This can be reproduced easily as the following steps:

 - export a merged overlayfs dir via qemu virtfs to guest

 - mount the exported virtfs in guest

 - create two sub-directories in the root dir of the mounted 9pfs

 - stat the root dir of 9pfs, this resets nlink to 1

 - remove all subdirs, the second unlink/rmdir would trigger warning

  ------------[ cut here ]------------
  WARNING: CPU: 3 PID: 1284 at fs/inode.c:282 drop_nlink+0x3e/0x50
  ...
  Call Trace:
    dump_stack+0x63/0x81
    __warn+0xcb/0xf0
    warn_slowpath_null+0x1d/0x20
    drop_nlink+0x3e/0x50
    v9fs_remove+0xaa/0x130 [9p]
    v9fs_vfs_rmdir+0x13/0x20 [9p]
    vfs_rmdir+0xb7/0x130
    do_rmdir+0x1b8/0x230
    SyS_unlinkat+0x22/0x30
    do_syscall_64+0x67/0x180
  ---[ end trace 43758d8ba91e603b ]---

Fix it by leaving i_nlink to be 1 and don't drop nlink if a directory
has nlink <= 2, which indicates that the underlying exported fs doesn't
maintain nlink count accurately.  This follows what ext4 does in
ext4_dec_count().

Link: http://lkml.kernel.org/r/20180312053829.4367-1-eguan@linux.alibaba.com
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Tested-by: Roman Kapl <code@rkapl.cz>
Cc: Caspar Zhang <caspar@linux.alibaba.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: <v9fs-developer@lists.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

net/9p: avoid -ERESTARTSYS leak to userspace

If it was interrupted by a signal, the 9p client may need to send some
more requests to the server for cleanup before returning to userspace.

To avoid such a last minute request to be interrupted right away, the
client memorizes if a signal is pending, clears TIF_SIGPENDING, handles
the request and calls recalc_sigpending() before returning.

Unfortunately, if the transmission of this cleanup request fails for any
reason, the transport returns an error and the client propagates it
right away, without calling recalc_sigpending().

This ends up with -ERESTARTSYS from the initially interrupted request
crawling up to syscall exit, with TIF_SIGPENDING cleared by the cleanup
request.  The specific signal handling code, which is responsible for
converting -ERESTARTSYS to -EINTR is not called, and userspace receives
the confusing errno value:

  open: Unknown error 512 (512)

This is really hard to hit in real life.  I discovered the issue while
working on hot-unplug of a virtio-9p-pci device with an instrumented
QEMU allowing to control request completion.

Both p9_client_zc_rpc() and p9_client_rpc() functions have this buggy
error path actually.  Their code flow is a bit obscure and the best
thing to do would probably be a full rewrite: to really ensure this
situation of clearing TIF_SIGPENDING and returning -ERESTARTSYS can
never happen.

But given the general lack of interest for the 9p code, I won't risk
breaking more things.  So this patch simply fixes the buggy paths in
both functions with a trivial label+goto.

Thanks to Laurent Dufour for his help and suggestions on how to find the
root cause and how to fix it.

Link: http://lkml.kernel.org/r/152062809886.10599.7361006774123053312.stgit@bahia.lan
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: David Miller <davem@davemloft.net>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2/dlm: clean up unused variable in dlm_process_recovery_data

Link: http://lkml.kernel.org/r/1522734135-7933-1-git-send-email-ge.changwei@h3c.com
Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2/o2hb: check len for bio_add_page() to avoid getting incorrect bio

We need to check len for bio_add_page() to make sure the bio has been
set up correctly, otherwise we may submit incorrect data to device.

Link: http://lkml.kernel.org/r/5ABC3EBE.5020807@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: add duplicated ino number check

Add duplicated ino number check, to avoid adding a file into the file
check list when this file is being checked.

Link: http://lkml.kernel.org/r/1495611866-27360-5-git-send-email-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: add kobject for online file check

Use embedded kobject mechanism for online file check feature, this will
avoid to use a global list to save/search per-device online file check
related data, meanwhile, reduce the code lines and make the code logic
clear.  The changed code is based on Goldwyn Rodrigues's patches and
ext4 fs code.

Link: http://lkml.kernel.org/r/1495611866-27360-4-git-send-email-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fix some small problems

First, move setting fe_done = 1 in spin lock, avoid bring any potential
race condition.

Second, tune mlog message level from ERROR to NOTICE, since the message
should not belong to error message.

Third, tune errno to -EAGAIN when file check queue is full, this errno
is more appropriate in the case.

Link: http://lkml.kernel.org/r/1495611866-27360-3-git-send-email-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: move some definitions to header file

Patch series "ocfs2: use kobject for online file check", v3.

Use embedded kobject mechanism for online file check feature, this will
avoid to use a global list to save/search per-device online file check
related data.  The changed code is based on Goldwyn Rodrigues's patches
and ext4 fs code, there is not any new features added, except some very
small fixes during this code refactoring.  Second, the code change does
not affect the underlying file check code.  Thank Goldwyn very much.

Compare with second version, add more comments in the patch
descriptions, to make sure each modification is mentioned.  Compare with
first version, split the code change into four patches, make sure each
patch will not bring ocfs2 kernel modules compiling errors.

This patch (of 3):

Move some definitions to header file, which will be referenced by other
source files when kobject mechanism is introduced.

Link: http://lkml.kernel.org/r/1495611866-27360-2-git-send-email-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: correct spelling mistake for migratable for all

Inspired by the ocfs2 patch to fix the spelling of migrateable to
migratable, I checked all ocfs2 files and found more spelling mistakes.
So correct them all.

Link: http://lkml.kernel.org/r/1521525734-19576-1-git-send-email-ge.changwei@h3c.com
Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fix spelling mistake: "Migrateable" -> "Migratable"

Trivial fix to spelling mistake in mlog message text

Link: http://lkml.kernel.org/r/20180319114101.2051-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2/dlm: wait for dlm recovery done when migrating all lock resources

Wait for dlm recovery done when migrating all lock resources in case that
new lock resource left after leaving dlm domain.  And the left lock
resource will cause other nodes BUG.

        NodeA                       NodeB                NodeC

  umount:
    dlm_unregister_domain()
      dlm_migrate_all_locks()

                                   NodeB down

  do recovery for NodeB
  and collect a new lockres
  form other live nodes:

    dlm_do_recovery
      dlm_remaster_locks
        dlm_request_all_locks:

    dlm_mig_lockres_handler
      dlm_new_lockres
        __dlm_insert_lockres

  at last NodeA become the
  master of the new lockres
  and leave domain:
    dlm_leave_domain()

                                                    mount:
                                                      dlm_join_domain()

                                                    touch file and request
                                                    for the owner of the new
                                                    lockres, but all the
                                                    other nodes said 'NO',
                                                    so NodeC decide to be
                                                    the owner, and send do
                                                    assert msg to other
                                                    nodes:
                                                    dlmlock()
                                                      dlm_get_lock_resource()
                                                        dlm_do_assert_master()

                                                    other nodes receive the msg
                                                    and found two masters exist.
                                                    at last cause BUG in
                                                    dlm_assert_master_handler()
                                                    -->BUG();

Link: http://lkml.kernel.org/r/5AAA6E25.7090303@huawei.com
Fixes: bc9838c4d44a ("dlm: allow dlm do recovery during shutdown")
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2/dlm: clean up unused stack variable in dlm_do_local_ast()

Link: http://lkml.kernel.org/r/1521116681-14602-2-git-send-email-ge.changwei@h3c.com
Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2/dlm: clean up unused argument for dlm_destroy_recovery_area()

Link: http://lkml.kernel.org/r/1521116681-14602-1-git-send-email-ge.changwei@h3c.com
Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/ocfs2/dlm/dlmrecovery.c: remove unrelated comment

Obviously, the comment before dlm_do_local_recovery_cleanup() has nothing
to do with it.  So remove it.

Link: http://lkml.kernel.org/r/1519371054-4648-1-git-send-email-ge.changwei@h3c.com
Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: remove two unused functions from suballoc.c

The two functions are no longer used.

Link: http://lkml.kernel.org/r/1519609595-26229-1-git-send-email-ge.changwei@h3c.com
Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: remove unnecessary null pointer check before kmem_cache_destroy()

As kmem_cache_destroy() already handles null pointers, so we can remove
the conditional test entirely.

Link: http://lkml.kernel.org/r/5A9EB21D.3000209@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2/dlm: don't handle migrate lockres if already in shutdown

We should not handle migrate lockres if we are already in
'DLM_CTXT_IN_SHUTDOWN', as that will cause lockres remains after leaving
dlm domain.  At last other nodes will get stuck into infinite loop when
requsting lock from us.

The problem is caused by concurrency umount between nodes.  Before
receiveing N1's DLM_BEGIN_EXIT_DOMAIN_MSG, N2 has picked up N1 as the
migrate target.  So N2 will continue sending lockres to N1 even though
N1 has left domain.

        N1                             N2 (owner)
                                       touch file

    access the file,
    and get pr lock

                                       begin leave domain and
                                       pick up N1 as new owner

    begin leave domain and
    migrate all lockres done

                                       begin migrate lockres to N1

    end leave domain, but
    the lockres left
    unexpectedly, because
    migrate task has passed

[piaojun@huawei.com: v3]
Link: http://lkml.kernel.org/r/5A9CBD19.5020107@huawei.com
Link: http://lkml.kernel.org/r/5A99F028.2090902@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: keep the trace point consistent with the function name

Keep the trace point consistent with the function name.

Link: http://lkml.kernel.org/r/02609aba-84b2-a22d-3f3b-bc1944b94260@huawei.com
Fixes: 3ef045c3d8ae ("ocfs2: switch to ->write_iter()")
Signed-off-by: Jia Guo <guojia12@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Acked-by: Gang He <ghe@suse.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: remove some unused function declarations

Remove some unused function declarations in dlmcommon.h.

Link: http://lkml.kernel.org/r/5A7D1034.7050807@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: use 'oi' instead of 'OCFS2_I()'

We could use 'oi' instead of 'OCFS2_I()' to make code more elegant.

Link: http://lkml.kernel.org/r/5A7020FE.5050906@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: use 'osb' instead of 'OCFS2_SB()'

We could use 'osb' instead of 'OCFS2_SB()' to make code more elegant.

Link: http://lkml.kernel.org/r/5A702111.7090907@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/faddr2line: show the code context

Inspired by gdb command 'list', show the code context of target lines.
Here is a example:

$ scripts/faddr2line vmlinux native_write_msr+0x6
native_write_msr+0x6/0x20:
arch_static_branch at arch/x86/include/asm/msr.h:105
100             return EAX_EDX_VAL(val, low, high);
101     }
102
103     static inline void notrace __wrmsr(unsigned int msr, u32 low, u32 high)
104     {
105             asm volatile("1: wrmsr\n"
106                          "2:\n"
107                          _ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_wrmsr_unsafe)
108                          : : "c" (msr), "a"(low), "d" (high) : "memory");
109     }
110
(inlined by) static_key_false at include/linux/jump_label.h:142
137     #define JUMP_TYPE_LINKED        2UL
138     #define JUMP_TYPE_MASK          3UL
139
140     static __always_inline bool static_key_false(struct static_key *key)
141     {
142             return arch_static_branch(key, false);
143     }
144
145     static __always_inline bool static_key_true(struct static_key *key)
146     {
147             return !arch_static_branch(key, true);
(inlined by) native_write_msr at arch/x86/include/asm/msr.h:150
145     static inline void notrace
146     native_write_msr(unsigned int msr, u32 low, u32 high)
147     {
148             __wrmsr(msr, low, high);
149
150             if (msr_tracepoint_active(__tracepoint_write_msr))
151                     do_trace_write_msr(msr, ((u64)high << 32 | low), 0);
152     }
153
154     /* Can be uninlined because referenced by paravirt */
155     static inline int notrace

Link: http://lkml.kernel.org/r/1521444205-2259-1-git-send-email-changbin.du@intel.com
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: fix stall in __bitmap_parselist()

syzbot is catching stalls at __bitmap_parselist()
(https://syzkaller.appspot.com/bug?id=ad7e0351fbc90535558514a71cd3edc11681997a).
The trigger is

  unsigned long v = 0;
  bitmap_parselist("7:,", &v, BITS_PER_LONG);

which results in hitting infinite loop at

    while (a <= b) {
    off = min(b - a + 1, used_size);
    bitmap_set(maskp, a, off);
    a += group_size;
    }

due to used_size == group_size == 0.

Link: http://lkml.kernel.org/r/20180404162647.15763-1-ynorov@caviumnetworks.com
Fixes: 0a5ce0831d04382a ("lib/bitmap.c: make bitmap_parselist() thread-safe and much faster")
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+6887cbb011c8054e8a3d@syzkaller.appspotmail.com>
Cc: Noam Camus <noamca@mellanox.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: fix bug in pgoff overflow checking

This is a fix for a regression in 32 bit kernels caused by an invalid
check for pgoff overflow in hugetlbfs mmap setup.  The check incorrectly
specified that the size of a loff_t was the same as the size of a long.
The regression prevents mapping hugetlbfs files at offsets greater than
4GB on 32 bit kernels.

On 32 bit kernels conversion from a page based unsigned long can not
overflow a loff_t byte offset.  Therefore, skip this check if
sizeof(unsigned long) != sizeof(loff_t).

Link: http://lkml.kernel.org/r/20180330145402.5053-1-mike.kravetz@oracle.com
Fixes: 63489f8e8211 ("hugetlbfs: check for pgoff value overflow")
Reported-by: Dan Rue <dan.rue@linaro.org>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Nic Losby <blurbdust@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zboot: fix stack protector in compressed boot phase

Calling __stack_chk_guard_setup() in decompress_kernel() is too late
that stack checking always fails for decompress_kernel() itself.  So
remove __stack_chk_guard_setup() and initialize __stack_chk_guard before
we call decompress_kernel().

Original code comes from ARM but also used for MIPS and SH, so fix them
together.  If without this fix, compressed booting of these archs will
fail because stack checking is enabled by default (>=4.16).

Link: http://lkml.kernel.org/r/1522226933-29317-1-git-send-email-chenhc@lemote.com
Fixes: 8779657d29c0 ("stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Acked-by: James Hogan <jhogan@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Rich Felker <dalias@libc.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'char-misc-4.17-rc1' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc updates from Greg KH:
 "Here is the big set of char/misc driver patches for 4.17-rc1.

  There are a lot of little things in here, nothing huge, but all
  important to the different hardware types involved:

   -  thunderbolt driver updates

   -  parport updates (people still care...)

   -  nvmem driver updates

   -  mei updates (as always)

   -  hwtracing driver updates

   -  hyperv driver updates

   -  extcon driver updates

   -  ... and a handful of even smaller driver subsystem and individual
      driver updates

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (149 commits)
  hwtracing: Add HW tracing support menu
  intel_th: Add ACPI glue layer
  intel_th: Allow forcing host mode through drvdata
  intel_th: Pick up irq number from resources
  intel_th: Don't touch switch routing in host mode
  intel_th: Use correct method of finding hub
  intel_th: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
  stm class: Make dummy's master/channel ranges configurable
  stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
  MAINTAINERS: Bestow upon myself the care for drivers/hwtracing
  hv: add SPDX license id to Kconfig
  hv: add SPDX license to trace
  Drivers: hv: vmbus: do not mark HV_PCIE as perf_device
  Drivers: hv: vmbus: respect what we get from hv_get_synint_state()
  /dev/mem: Avoid overwriting "err" in read_mem()
  eeprom: at24: use SPDX identifier instead of GPL boiler-plate
  eeprom: at24: simplify the i2c functionality checking
  eeprom: at24: fix a line break
  eeprom: at24: tweak newlines
  eeprom: at24: refactor at24_probe()
  ...

Merge tag 'driver-core-4.17-rc1' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core patches for 4.17-rc1.

  There's really not much here, just a bunch of firmware code
  refactoring from Luis as he attempts to wrangle that codebase into
  something that is managable, along with a bunch of userspace tests for
  it. Other than that, a handful of small bugfixes and reverts of things
  that didn't work out.

  Full details are in the shortlog, it's not all that much.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits)
  drivers: base: remove check for callback in coredump_store()
  mt7601u: use firmware_request_cache() to address cache on reboot
  firmware: add firmware_request_cache() to help with cache on reboot
  firmware: fix typo on pr_info_once() when ignore_sysfs_fallback is used
  firmware: explicitly include vmalloc.h
  firmware: ensure the firmware cache is not used on incompatible calls
  test_firmware: modify custom fallback tests to use unique files
  firmware: add helper to check to see if fw cache is setup
  firmware: fix checking for return values for fw_add_devm_name()
  rename: _request_firmware_load() fw_load_sysfs_fallback()
  test_firmware: test three firmware kernel configs using a proc knob
  test_firmware: expand on library with shared helpers
  firmware: enable to force disable the fallback mechanism at run time
  firmware: enable run time change of forcing fallback loader
  firmware: move firmware loader into its own directory
  firmware: split firmware fallback functionality into its own file
  firmware: move loading timeout under struct firmware_fallback_config
  firmware: use helpers for setting up a temporary cache timeout
  firmware: simplify CONFIG_FW_LOADER_USER_HELPER_FALLBACK further
  drivers: base: add description for .coredump() callback
  ...

Merge tag 'staging-4.17-rc1' of git://git./linux/kernel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
 "Here is the big set of Staging/IIO driver patches for 4.17-rc1.

  It is a lot, over 500 changes, but not huge by previous kernel release
  standards. We deleted more lines than we added again (27k added vs.
  91k remvoed), thanks to finally being able to delete the IRDA drivers
  and networking code.

  We also deleted the ccree crypto driver, but that's coming back in
  through the crypto tree to you, in a much cleaned-up form.

  Added this round is at lot of "mt7621" device support, which is for an
  embedded device that Neil Brown cares about, and of course a handful
  of new IIO drivers as well.

  And finally, the fsl-mc core code moved out of the staging tree to the
  "real" part of the kernel, which is nice to see happen as well.

  Full details are in the shortlog, which has all of the tiny cleanup
  patches described.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (579 commits)
  staging: rtl8723bs: Remove yield call, replace with cond_resched()
  staging: rtl8723bs: Replace yield() call with cond_resched()
  staging: rtl8723bs: Remove unecessary newlines from 'odm.h'.
  staging: rtl8723bs: Rework 'struct _ODM_Phy_Status_Info_' coding style.
  staging: rtl8723bs: Rework 'struct _ODM_Per_Pkt_Info_' coding style.
  staging: rtl8723bs: Replace NULL pointer comparison with '!'.
  staging: rtl8723bs: Factor out rtl8723bs_recv_tasklet() sections.
  staging: rtl8723bs: Fix function signature that goes over 80 characters.
  staging: rtl8723bs: Fix lines too long in update_recvframe_attrib().
  staging: rtl8723bs: Remove unnecessary blank lines in 'rtl8723bs_recv.c'.
  staging: rtl8723bs: Change camel case to snake case in 'rtl8723bs_recv.c'.
  staging: rtl8723bs: Add missing braces in else statement.
  staging: rtl8723bs: Add spaces around ternary operators.
  staging: rtl8723bs: Fix lines with trailing open parentheses.
  staging: rtl8723bs: Remove unnecessary length #define's.
  staging: rtl8723bs: Fix IEEE80211 authentication algorithm constants.
  staging: rtl8723bs: Fix alignment in rtw_wx_set_auth().
  staging: rtl8723bs: Remove braces from single statement conditionals.
  staging: rtl8723bs: Remove unecessary braces from switch statement.
  staging: rtl8723bs: Fix newlines in rtw_wx_set_auth().
  ...

Merge tag 'tty-4.17-rc1' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver patches for 4.17-rc1

  Not all that big really, most are just small fixes and additions to
  existing drivers. There's a bunch of work on the imx serial driver
  recently for some reason, and a new embedded serial driver added as
  well.

  Full details are in the shortlog.

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits)
  serial: expose buf_overrun count through proc interface
  serial: mvebu-uart: fix tx lost characters
  tty: serial: msm_geni_serial: Fix return value check in qcom_geni_serial_probe()
  tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP
  8250-men-mcb: add support for 16z025 and 16z057
  powerpc: Mark the variable earlycon_acpi_spcr_enable maybe_unused
  serial: stm32: fix initialization of RS485 mode
  ARM: dts: STi: Remove "console=ttyASN" from bootargs for STi boards
  vt: change SGR 21 to follow the standards
  serdev: Fix typo in serdev_device_alloc
  ARM: dts: STi: Fix aliases property name for STi boards
  tty: st-asc: Update tty alias
  serial: stm32: add support for RS485 hardware control mode
  dt-bindings: serial: stm32: add RS485 optional properties
  selftests: add devpts selftests
  devpts: comment devpts_mntget()
  devpts: resolve devpts bind-mounts
  devpts: hoist out check for DEVPTS_SUPER_MAGIC
  serial: 8250: Add Nuvoton NPCM UART
  serial: mxs-auart: disable clks of Alphascale ASM9260
  ...

Merge tag 'usb-4.17-rc1' of git://git./linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver patches for 4.17-rc1.

  Lots of USB typeC work happened this round, with code moving from the
  staging directory into the "real" part of the kernel, as well as new
  infrastructure being added to be able to handle the different types of
  "roles" that typeC requires.

  There is also the normal huge set of USB gadget controller and driver
  updates, along with XHCI changes, and a raft of other tiny fixes all
  over the USB tree. And the PHY driver updates are merged in here as
  well as they interacted with the USB drivers in some places.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (250 commits)
  Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870"
  usb: musb: gadget: misplaced out of bounds check
  usb: chipidea: imx: Fix ULPI on imx53
  usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag
  usb: chipidea: usbmisc: small clean up
  usb: chipidea: usbmisc: evdo can be set e/o reset
  usb: chipidea: usbmisc: evdo is only specific to OTG port
  USB: serial: ftdi_sio: add Id for Physik Instrumente E-870
  usb: dwc3: gadget: never call ->complete() from ->ep_queue()
  usb: gadget: udc: core: update usb_ep_queue() documentation
  usb: host: Remove the deprecated ATH79 USB host config options
  usb: roles: Fix return value check in intel_xhci_usb_probe()
  USB: gadget: f_midi: fixing a possible double-free in f_midi
  usb: core: Add USB_QUIRK_DELAY_CTRL_MSG to usbcore quirks
  usb: core: Copy parameter string correctly and remove superfluous null check
  USB: announce bcdDevice as well as idVendor, idProduct.
  USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw
  usb: hub: Reduce warning to notice on power loss
  USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
  USB: serial: cp210x: add ELDAT Easywave RX09 id
  ...

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "This fixes some fallout from the net-next merge the other day, plus
  some non-merge-window-related bug fixes:

  1) Fix sparse warnings in bcmgenet, systemport, b53, and mt7530
     (Florian Fainelli)

  2) pptp does a bogus dst_release() on a route we have a single
     refcount on, and attached to a socket, which needs that refcount
     (Eric Dumazet)

  3) UDP connected sockets on ipv6 can race with route update handling,
     resulting in a pre-PMTU update route still stuck on the socket and
     thus continuing to get ICMPV6_PKT_TOOBIG errors. We end up never
     seeing the updated route. (Alexey Kodanev)

  4) Missing list initializer(s) in TIPC (Jon Maloy)

  5) Connect phy early to prevent crashes in lan78xx driver (Alexander
     Graf)

  6) Fix build with modular NVMEM (Arnd Bergmann)

  7) netdevsim canot mark nsim_devlink_net_ops and nsim_fib_net_ops as
     __net_initdata, as these are references from module unload
     unconditionally (Arnd Bergmann)"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (23 commits)
  netdevsim: remove incorrect __net_initdata annotations
  sfc: remove ctpio_dmabuf_start from stats
  inet: frags: fix ip6frag_low_thresh boundary
  tipc: Fix namespace violation in tipc_sk_fill_sock_diag
  net: avoid unneeded atomic operation in ip*_append_data()
  nvmem: disallow modular CONFIG_NVMEM
  net: hns3: fix length overflow when CONFIG_ARM64_64K_PAGES
  nfp: use full 40 bits of the NSP buffer address
  lan78xx: Connect phy early
  nfp: add a separate counter for packets with CHECKSUM_COMPLETE
  tipc: Fix missing list initializations in struct tipc_subscription
  ipv6: udp: set dst cache for a connected sk if current not valid
  ipv6: udp: convert 'connected' to bool type in udpv6_sendmsg()
  ipv6: allow to cache dst for a connected sk in ip6_sk_dst_lookup_flow()
  ipv6: add a wrapper for ip6_dst_store() with flowi6 checks
  net: phy: marvell10g: add thermal hwmon device
  pptp: remove a buggy dst release in pptp_connect()
  net: dsa: mt7530: Use NULL instead of plain integer
  net: dsa: b53: Fix sparse warnings in b53_mmap.c
  af_unix: remove redundant lockdep class
  ...

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto updates from Herbert Xu:
 "API:

   - add AEAD support to crypto engine

   - allow batch registration in simd

  Algorithms:

   - add CFB mode

   - add speck block cipher

   - add sm4 block cipher

   - new test case for crct10dif

   - improve scheduling latency on ARM

   - scatter/gather support to gcm in aesni

   - convert x86 crypto algorithms to skcihper

  Drivers:

   - hmac(sha224/sha256) support in inside-secure

   - aes gcm/ccm support in stm32

   - stm32mp1 support in stm32

   - ccree driver from staging tree

   - gcm support over QI in caam

   - add ks-sa hwrng driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (212 commits)
  crypto: ccree - remove unused enums
  crypto: ahash - Fix early termination in hash walk
  crypto: brcm - explicitly cast cipher to hash type
  crypto: talitos - don't leak pointers to authenc keys
  crypto: qat - don't leak pointers to authenc keys
  crypto: picoxcell - don't leak pointers to authenc keys
  crypto: ixp4xx - don't leak pointers to authenc keys
  crypto: chelsio - don't leak pointers to authenc keys
  crypto: caam/qi - don't leak pointers to authenc keys
  crypto: caam - don't leak pointers to authenc keys
  crypto: lrw - Free rctx->ext with kzfree
  crypto: talitos - fix IPsec cipher in length
  crypto: Deduplicate le32_to_cpu_array() and cpu_to_le32_array()
  crypto: doc - clarify hash callbacks state machine
  crypto: api - Keep failed instances alive
  crypto: api - Make crypto_alg_lookup static
  crypto: api - Remove unused crypto_type lookup function
  crypto: chelsio - Remove declaration of static function from header
  crypto: inside-secure - hmac(sha224) support
  crypto: inside-secure - hmac(sha256) support
  ..

Merge tag 'riscv-for-linus-4.17-mw0' of git://git./linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains the new features we'd like to incorporate into the
  RISC-V port for 4.17. We might have a bit more stuff land later in the
  merge window, but I wanted to get this out earlier just so everyone
  can see where we currently stand.

  A short summary of the changes is:

   - We've added support for dynamic ftrace on RISC-V targets.

   - There have been a handful of cleanups to our atomic and locking
     routines. They now more closely match the released RISC-V memory
     model draft.

   - Our module loading support has been cleaned up and is now enabled
     by default, despite some limitations still existing.

   - A patch to define COMMANDLINE_FORCE instead of COMMANDLINE_OVERRIDE
     so the generic device tree code picks up handling all our command
     line stuff.

  There's more information in the merge commits for each patch set"

* tag 'riscv-for-linus-4.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (21 commits)
  RISC-V: Rename CONFIG_CMDLINE_OVERRIDE to CONFIG_CMDLINE_FORCE
  RISC-V: Add definition of relocation types
  RISC-V: Enable module support in defconfig
  RISC-V: Support SUB32 relocation type in kernel module
  RISC-V: Support ADD32 relocation type in kernel module
  RISC-V: Support ALIGN relocation type in kernel module
  RISC-V: Support RVC_BRANCH/JUMP relocation type in kernel modulewq
  RISC-V: Support HI20/LO12_I/LO12_S relocation type in kernel module
  RISC-V: Support CALL relocation type in kernel module
  RISC-V: Support GOT_HI20/CALL_PLT relocation type in kernel module
  RISC-V: Add section of GOT.PLT for kernel module
  RISC-V: Add sections of PLT and GOT for kernel module
  riscv/atomic: Strengthen implementations with fences
  riscv/spinlock: Strengthen implementations with fences
  riscv/barrier: Define __smp_{store_release,load_acquire}
  riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support
  riscv/ftrace: Add DYNAMIC_FTRACE_WITH_REGS support
  riscv/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS support
  riscv/ftrace: Add dynamic function graph tracer support
  riscv/ftrace: Add dynamic function tracer support
  ...

Merge tag 'arm64-upstream' of git://git./linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "Nothing particularly stands out here, probably because people were
  tied up with spectre/meltdown stuff last time around. Still, the main
  pieces are:

   - Rework of our CPU features framework so that we can whitelist CPUs
     that don't require kpti even in a heterogeneous system

   - Support for the IDC/DIC architecture extensions, which allow us to
     elide instruction and data cache maintenance when writing out
     instructions

   - Removal of the large memory model which resulted in suboptimal
     codegen by the compiler and increased the use of literal pools,
     which could potentially be used as ROP gadgets since they are
     mapped as executable

   - Rework of forced signal delivery so that the siginfo_t is
     well-formed and handling of show_unhandled_signals is consolidated
     and made consistent between different fault types

   - More siginfo cleanup based on the initial patches from Eric
     Biederman

   - Workaround for Cortex-A55 erratum #1024718

   - Some small ACPI IORT updates and cleanups from Lorenzo Pieralisi

   - Misc cleanups and non-critical fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (70 commits)
  arm64: uaccess: Fix omissions from usercopy whitelist
  arm64: fpsimd: Split cpu field out from struct fpsimd_state
  arm64: tlbflush: avoid writing RES0 bits
  arm64: cmpxchg: Include linux/compiler.h in asm/cmpxchg.h
  arm64: move percpu cmpxchg implementation from cmpxchg.h to percpu.h
  arm64: cmpxchg: Include build_bug.h instead of bug.h for BUILD_BUG
  arm64: lse: Include compiler_types.h and export.h for out-of-line LL/SC
  arm64: fpsimd: include <linux/init.h> in fpsimd.h
  drivers/perf: arm_pmu_platform: do not warn about affinity on uniprocessor
  perf: arm_spe: include linux/vmalloc.h for vmap()
  Revert "arm64: Revert L1_CACHE_SHIFT back to 6 (64-byte cache line size)"
  arm64: cpufeature: Avoid warnings due to unused symbols
  arm64: Add work around for Arm Cortex-A55 Erratum 1024718
  arm64: Delay enabling hardware DBM feature
  arm64: Add MIDR encoding for Arm Cortex-A55 and Cortex-A35
  arm64: capabilities: Handle shared entries
  arm64: capabilities: Add support for checks based on a list of MIDRs
  arm64: Add helpers for checking CPU MIDR against a range
  arm64: capabilities: Clean up midr range helpers
  arm64: capabilities: Change scope of VHE to Boot CPU feature
  ...

Merge branch 'irq-core-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "The usual pile of boring changes:

   - Consolidate tasklet functions to share code instead of duplicating
     it

   - The first step for making the low level entry handler management on
     multi-platform kernels generic

   - A new sysfs file which allows to retrieve the wakeup state of
     interrupts.

   - Ensure that the interrupt thread follows the effective affinity and
     not the programmed affinity to avoid cross core wakeups.

   - Two new interrupt controller drivers (Microsemi Ocelot and Qualcomm
     PDC)

   - Fix the wakeup path clock handling for Reneasas interrupt chips.

   - Rework the boot time register reset for ARM GIC-V2/3

   - Better suspend/resume support for ARM GIV-V3/ITS

   - Add missing locking to the ARM GIC set_type() callback

   - Small fixes for the irq simulator code

   - SPDX identifiers for the irq core code and removal of boiler plate

   - Small cleanups all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  openrisc: Set CONFIG_MULTI_IRQ_HANDLER
  arm64: Set CONFIG_MULTI_IRQ_HANDLER
  genirq: Make GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER
  irqchip/gic: Take lock when updating irq type
  irqchip/gic: Update supports_deactivate static key to modern api
  irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enabling
  irqchip: Add a driver for the Microsemi Ocelot controller
  dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller
  irqchip/gic-v3: Probe for SCR_EL3 being clear before resetting AP0Rn
  irqchip/gic-v3: Don't try to reset AP0Rn
  irqchip/gic-v3: Do not check trigger configuration of partitionned LPIs
  genirq: Remove license boilerplate/references
  genirq: Add missing SPDX identifiers
  genirq/matrix: Cleanup SPDX identifier
  genirq: Cleanup top of file comments
  genirq: Pass desc to __irq_free instead of irq number
  irqchip/gic-v3: Loudly complain about the use of IRQ_TYPE_NONE
  irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE
  RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handler
  genirq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER
  ...

Merge branch 'timers-core-for-linus' of git://git./linux/kernel/git/tip/tip

Pull time(r) updates from Thomas Gleixner:
 "A small set of updates for timers and timekeeping:

   - The most interesting change is the consolidation of clock MONOTONIC
     and clock BOOTTIME.

     Clock MONOTONIC behaves now exactly like clock BOOTTIME and does
     not longer ignore the time spent in suspend. A new clock
     MONOTONIC_ACTIVE is provived which behaves like clock MONOTONIC in
     kernels before this change. This allows applications to
     programmatically check for the clock MONOTONIC behaviour.

     As discussed in the review thread, this has the potential of
     breaking user space and we might have to revert this. Knock on wood
     that we can avoid that exercise.

   - Updates to the NTP mechanism to improve accuracy

   - A new kernel internal data structure to aid the ongoing Y2038 work.

   - Cleanups and simplifications of the clocksource code.

   - Make the alarmtimer code play nicely with debugobjects"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Init nanosleep alarm timer on stack
  y2038: Introduce struct __kernel_old_timeval
  tracing: Unify the "boot" and "mono" tracing clocks
  hrtimer: Unify MONOTONIC and BOOTTIME clock behavior
  posix-timers: Unify MONOTONIC and BOOTTIME clock behavior
  timekeeping: Remove boot time specific code
  Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior
  timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock
  timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock
  timekeeping/ntp: Determine the multiplier directly from NTP tick length
  timekeeping/ntp: Don't align NTP frequency adjustments to ticks
  clocksource: Use ATTRIBUTE_GROUPS
  clocksource: Use DEVICE_ATTR_RW/RO/WO to define device attributes
  clocksource: Don't walk the clocksource list for empty override

Merge tag 'random_for_linus' of git://git./linux/kernel/git/tytso/random

Pull /dev/random updates from Ted Ts'o:
 "A few random (cough, cough) cleanups for the /dev/random driver"

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  drivers/char/random.c: remove unused dont_count_entropy
  random: optimize add_interrupt_randomness
  random: always fill buffer in get_random_bytes_wait
  random: use a tighter cap in credit_entropy_bits_safe()

Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Cleanups and bugfixes for ext4, including some fixes to make ext4 more
  robust against maliciously crafted file system images.

  (I still don't recommend that container folks hold any delusions that
  mounting arbitary images that can be crafted by malicious attackers
  should be considered sane thing to do, though!)"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (29 commits)
  ext4: force revalidation of directory pointer after seekdir(2)
  ext4: add extra checks to ext4_xattr_block_get()
  ext4: add bounds checking to ext4_xattr_find_entry()
  ext4: move call to ext4_error() into ext4_xattr_check_block()
  ext4: don't show data=<mode> option if defaulted
  ext4: omit init_itable=n in procfs when disabled
  ext4: show more binary mount options in procfs
  ext4: simplify kobject usage
  ext4: remove unused parameters in sysfs code
  ext4: null out kobject* during sysfs cleanup
  ext4: don't allow r/w mounts if metadata blocks overlap the superblock
  ext4: always initialize the crc32c checksum driver
  ext4: fail ext4_iget for root directory if unallocated
  ext4: limit xattr size to INT_MAX
  ext4: add validity checks for bitmap block numbers
  ext4: fix comments in ext4_swap_extents()
  ext4: use generic_writepages instead of __writepage/write_cache_pages
  ext4: don't complain about incorrect features when probing
  ext4: remove EXT4_STATE_DIOREAD_LOCK flag
  ext4: fix offset overflow on 32-bit archs in ext4_iomap_begin()
  ...

Merge tag '4.17-SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs updates from Steve French:
 "Includes SMB3.11 security improvements, as well as various fixes for
  stable and some debugging improvements"

* tag '4.17-SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Add minor debug message during negprot
  smb3: Fix root directory when server returns inode number of zero
  cifs: fix sparse warning on previous patch in a few printks
  cifs: add server->vals->header_preamble_size
  cifs: smbd: disconnect transport on RDMA errors
  cifs: smbd: avoid reconnect lockup
  Don't log confusing message on reconnect by default
  Don't log expected error on DFS referral request
  fs: cifs: Replace _free_xid call in cifs_root_iget function
  SMB3.1.1 dialect is no longer experimental
  Tree connect for SMB3.1.1 must be signed for non-encrypted shares
  fix smb3-encryption breakage when CONFIG_DEBUG_SG=y
  CIFS: fix sha512 check in cifs_crypto_secmech_release
  CIFS: implement v3.11 preauth integrity
  CIFS: add sha512 secmech
  CIFS: refactor crypto shash/sdesc allocation&free
  Update README file for cifs.ko
  Update TODO list for cifs.ko
  cifs: fix memory leak in SMB2_open()
  CIFS: SMBD: fix spelling mistake: "faield" and "legnth"

Merge tag 'gfs2-4.17.fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 updates from Bob Peterson:
 "We've only got nine GFS2 patches for this merge window:

   - report journal recovery times more accurately during journal replay
     (Abhi Das)

   - fix fallocate chunk size (Andreas Gruenbacher)

   - correctly dirty inodes during rename (Andreas Gruenbacher)

   - improve the comment for function gfs2_block_map (Andreas
     Gruenbacher)

   - improve kernel trace point iomap end: The physical block address
     was added (Andreas Gruenbacher)

   - fix a nasty file system corruption bug that surfaced in xfstests
     476 in punch-hole/truncate (Andreas Gruenbacher)

   - fix a problem Christoph Helwig pointed out, namely, that GFS2 was
     misusing the IOMAP_ZERO flag. The zeroing of new blocks was moved
     to the proper fallocate code (Andreas Gruenbacher)

   - declare function gfs2_remove_from_ail as static (Bob Peterson)

   - only set PageChecked for jdata page writes (Bob Peterson)"

* tag 'gfs2-4.17.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: time journal recovery steps accurately
  gfs2: Zero out fallocated blocks in fallocate_chunk
  gfs2: Check for the end of metadata in punch_hole
  gfs2: gfs2_iomap_end tracepoint: log block address
  gfs2: Improve gfs2_block_map comment
  GFS2: Only set PageChecked for jdata pages
  GFS2: Make function gfs2_remove_from_ail static
  gfs2: Dirty source inode during rename
  gfs2: Fix fallocate chunk size

Merge tag 'for-4.17-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs updates from David Sterba:
 "There are a several user visible changes, the rest is mostly invisible
  and continues to clean up the whole code base.

  User visible changes:
   - new mount option nossd_spread (pair for ssd_spread)

   - mount option subvolid will detect junk after the number and fail
     the mount

   - add message after cancelled device replace

   - direct module dependency on libcrc32, removed own crc wrappers

   - removed user space transaction ioctls

   - use lighter locking when reading /proc/self/mounts, RCU instead of
     mutex to avoid unnecessary contention

  Enhancements:
   - skip writeback of last page when truncating file to same size

   - send: do not issue unnecessary truncate operations

   - mount option token specifiers: use %u for unsigned values, more
     validation

   - selftests: more tree block validations

  qgroups:
   - preparatory work for splitting reservation types for data and
     metadata, this should allow for more accurate tracking and fix some
     issues with underflows or do further enhancements

   - split metadata reservations for started and joined transaction so
     they do not get mixed up and are accounted correctly at commit time

   - with the above, it's possible to revert patch that potentially
     deadlocks when trying to make more space by explicitly committing
     when the quota limit is hit

   - fix root item corruption when multiple same source snapshots are
     created with quota enabled

  RAID56:
   - make sure target is identical to source when raid56 rebuild fails
     after dev-replace

   - faster rebuild during scrub, batch by stripes and not
     block-by-block

   - make more use of cached data when rebuilding from a missing device

  Fixes:
   - null pointer deref when device replace target is missing

   - fix fsync after hole punching when using no-holes feature

   - fix lockdep splat when allocating percpu data with wrong GFP flags

  Cleanups, refactoring, core changes:
   - drop redunant parameters from various functions

   - kill and opencode trivial helpers

   - __cold/__exit function annotations

   - dead code removal

   - continued audit and documentation of memory barriers

   - error handling: handle removal from uuid tree

   - error handling: remove handling of impossible condtitons

   - more debugging or error messages

   - updated tracepoints

   - one VLA use removal (and one still left)"

* tag 'for-4.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (164 commits)
  btrfs: lift errors from add_extent_changeset to the callers
  Btrfs: print error messages when failing to read trees
  btrfs: user proper type for btrfs_mask_flags flags
  btrfs: split dev-replace locking helpers for read and write
  btrfs: remove stale comments about fs_mutex
  btrfs: use RCU in btrfs_show_devname for device list traversal
  btrfs: update barrier in should_cow_block
  btrfs: use lockdep_assert_held for mutexes
  btrfs: use lockdep_assert_held for spinlocks
  btrfs: Validate child tree block's level and first key
  btrfs: tests/qgroup: Fix wrong tree backref level
  Btrfs: fix copy_items() return value when logging an inode
  Btrfs: fix fsync after hole punching when using no-holes feature
  btrfs: use helper to set ulist aux from a qgroup
  Revert "btrfs: qgroups: Retry after commit on getting EDQUOT"
  btrfs: qgroup: Update trace events for metadata reservation
  btrfs: qgroup: Use root::qgroup_meta_rsv_* to record qgroup meta reserved space
  btrfs: delayed-inode: Use new qgroup meta rsv for delayed inode and item
  btrfs: qgroup: Use separate meta reservation type for delalloc
  btrfs: qgroup: Introduce function to convert META_PREALLOC into META_PERTRANS
  ...

Merge tag 'xfs-4.17-merge-1' of git://git./fs/xfs/xfs-linux

Pull xfs updates from Darrick Wong:
 "Here's the first round of fixes for XFS for 4.17.

  The biggest new features this time around are the addition of lazytime
  support, further enhancement of the on-disk inode metadata verifiers,
  and a patch to smooth over some of the AGFL padding problems that have
  intermittently plagued users since 4.5. I forsee sending a second pull
  request next week with further bug fixes and speedups in the online
  scrub code and elsewhere.

  This series has been run through a full xfstests run over the weekend
  and through a quick xfstests run against this morning's master, with
  no major failures reported.

  Summary of changes for this release:

   - Various cleanups and code fixes

   - Implement lazytime as a mount option

   - Convert various on-disk metadata checks from asserts to -EFSCORRUPTED

   - Fix accounting problems with the rmap per-ag reservations

   - Refactorings and cleanups for xfs_log_force

   - Various bugfixes for the reflink code

   - Work around v5 AGFL padding problems to prevent fs shutdowns

   - Establish inode fork verifiers to inspect on-disk metadata
     correctness

   - Various online scrub fixes

   - Fix v5 swapext blowing up on deleted inodes"

* tag 'xfs-4.17-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (49 commits)
  xfs: do not log/recover swapext extent owner changes for deleted inodes
  xfs: clean up xfs_mount allocation and dynamic initializers
  xfs: remove dead inode version setting code
  xfs: catch inode allocation state mismatch corruption
  xfs: xfs_scrub_iallocbt_xref_rmap_inodes should use xref_set_corrupt
  xfs: flag inode corruption if parent ptr doesn't get us a real inode
  xfs: don't accept inode buffers with suspicious unlinked chains
  xfs: move inode extent size hint validation to libxfs
  xfs: record inode buf errors as a xref error in inobt scrubber
  xfs: remove xfs_buf parameter from inode scrub methods
  xfs: inode scrubber shouldn't bother with raw checks
  xfs: bmap scrubber should do rmap xref with bmap for sparse files
  xfs: refactor inode buffer verifier error logging
  xfs: refactor inode verifier error logging
  xfs: refactor bmap record validation
  xfs: sanity-check the unused space before trying to use it
  xfs: detect agfl count corruption and reset agfl
  xfs: unwind the try_again loop in xfs_log_force
  xfs: refactor xfs_log_force_lsn
  xfs: minor cleanup for xfs_reflink_end_cow
  ...

Merge branch 'work.dcache' of git://git./linux/kernel/git/viro/vfs

Pull vfs dcache updates from Al Viro:
 "Part of this is what the trylock loop elimination series has turned
  into, part making d_move() preserve the parent (and thus the path) of
  victim, plus some general cleanups"

* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (22 commits)
  d_genocide: move export to definition
  fold dentry_lock_for_move() into its sole caller and clean it up
  make non-exchanging __d_move() copy ->d_parent rather than swap them
  oprofilefs: don't oops on allocation failure
  lustre: get rid of pointless casts to struct dentry *
  debugfs_lookup(): switch to lookup_one_len_unlocked()
  fold lookup_real() into __lookup_hash()
  take out orphan externs (empty_string/slash_string)
  split d_path() and friends into a separate file
  dcache.c: trim includes
  fs/dcache: Avoid a try_lock loop in shrink_dentry_list()
  get rid of trylock loop around dentry_kill()
  handle move to LRU in retain_dentry()
  dput(): consolidate the "do we need to retain it?" into an inlined helper
  split the slow part of lock_parent() off
  now lock_parent() can't run into killed dentry
  get rid of trylock loop in locking dentries on shrink list
  d_delete(): get rid of trylock loop
  fs/dcache: Move dentry_kill() below lock_parent()
  fs/dcache: Remove stale comment from dentry_kill()
  ...

netdevsim: remove incorrect __net_initdata annotations

The __net_initdata section cannot currently be used for structures that
get cleaned up in an exitcall using unregister_pernet_operations:

WARNING: vmlinux.o(.text+0x868c34): Section mismatch in reference from the function nsim_devlink_exit() to the (unknown reference) .init.data:(unknown)
The function nsim_devlink_exit() references
the (unknown reference) __initdata (unknown).
This is often because nsim_devlink_exit lacks a __initdata
annotation or the annotation of (unknown) is wrong.
WARNING: vmlinux.o(.text+0x868c64): Section mismatch in reference from the function nsim_devlink_init() to the (unknown reference) .init.data:(unknown)
WARNING: vmlinux.o(.text+0x8692bc): Section mismatch in reference from the function nsim_fib_exit() to the (unknown reference) .init.data:(unknown)
WARNING: vmlinux.o(.text+0x869300): Section mismatch in reference from the function nsim_fib_init() to the (unknown reference) .init.data:(unknown)

As that warning tells us, discarding the structure after a module is
loaded would lead to a undefined behavior when that module is removed.

It might be possible to change that annotation so it has no effect for
loadable modules, but I have not figured out exactly how to do that, and
we want this to be fixed in -rc1.

This just removes the annotations, just like we do for all other such
modules.

Fixes: 37923ed6b8ce ("netdevsim: Add simple FIB resource controller via devlink")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: remove ctpio_dmabuf_start from stats

The ctpio_dmabuf_start entry is not actually a stat and shouldn't
be exposed to ethtool.

Fixes: 2c0b6ee837db ("sfc: expose CTPIO stats on NICs that support them")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet: frags: fix ip6frag_low_thresh boundary

Giving an integer to proc_doulongvec_minmax() is dangerous on 64bit arches,
since linker might place next to it a non zero value preventing a change
to ip6frag_low_thresh.

ip6frag_low_thresh is not used anymore in the kernel, but we do not
want to prematuraly break user scripts wanting to change it.

Since specifying a minimal value of 0 for proc_doulongvec_minmax()
is moot, let's remove these zero values in all defrag units.

Fixes: 6e00f7dd5e4e ("ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: Fix namespace violation in tipc_sk_fill_sock_diag

To fetch UID info for socket diagnostics, we determine the
namespace of user context using tipc socket instance. This
may cause namespace violation, as the kernel will remap based
on UID.

We fix this by fetching namespace info using the calling userspace
netlink socket.

Fixes: c30b70deb5f4 (tipc: implement socket diagnostics for AF_TIPC)
Reported-by: syzbot+326e587eff1074657718@syzkaller.appspotmail.com
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: GhantaKrishnamurthy MohanKrishna <mohan.krishna.ghanta.krishnamurthy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: avoid unneeded atomic operation in ip*_append_data()

After commit 694aba690de0 ("ipv4: factorize sk_wmem_alloc updates
done by __ip_append_data()") and commit 1f4c6eb24029 ("ipv6:
factorize sk_wmem_alloc updates done by __ip6_append_data()"),
when transmitting sub MTU datagram, an addtional, unneeded atomic
operation is performed in ip*_append_data() to update wmem_alloc:
in the above condition the delta is 0.

The above cause small but measurable performance regression in UDP
xmit tput test with packet size below MTU.

This change avoids such overhead updating wmem_alloc only if
wmem_alloc_delta is non zero.

The error path is left intentionally unmodified: it's a slow path
and simplicity is preferred to performances.

Fixes: 694aba690de0 ("ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()")
Fixes: 1f4c6eb24029 ("ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nvmem: disallow modular CONFIG_NVMEM

The new of_get_nvmem_mac_address() helper function causes a link error
with CONFIG_NVMEM=m:

drivers/of/of_net.o: In function `of_get_nvmem_mac_address':
of_net.c:(.text+0x168): undefined reference to `of_nvmem_cell_get'
of_net.c:(.text+0x19c): undefined reference to `nvmem_cell_read'
of_net.c:(.text+0x1a8): undefined reference to `nvmem_cell_put'

I could not come up with a good solution for this, as the code is always
built-in. Using an #if IS_REACHABLE() check around it would solve the
link time issue but then stop it from working in that configuration.
Making of_nvmem_cell_get() an inline function could also solve that, but
seems a bit ugly since it's somewhat larger than most inline functions,
and it would just bring that problem into the callers.  Splitting the
function into a separate file might be an alternative.

This uses the big hammer by making CONFIG_NVMEM itself a 'bool' symbol,
which avoids the problem entirely but makes the vmlinux larger for anyone
that might use NVMEM support but doesn't need it built-in otherwise.

Fixes: 9217e566bdee ("of_net: Implement of_get_nvmem_mac_address helper")
Cc: Mike Looijmans <mike.looijmans@topic.nl>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mike Looijmans
Signed-off-by: David S. Miller <davem@davemloft.net>