John Crispin [Mon, 17 Aug 2015 05:58:07 +0000 (05:58 +0000)]
ramips: fix Asus RP-N53 and Lenovo Y1{, S} image names
This patch:
* fixes typo (rp_n53 -> rp-n53) in Asus RP-N53 image name
* removes manufacturer from image names for Lenovo Y1{,S} devices
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46616
John Crispin [Mon, 17 Aug 2015 05:57:55 +0000 (05:57 +0000)]
ramips: fix Asus WL-330N{, 3G} boards names
There are other Asus boards supported in ramips target, so use the same naming scheme for WL-330N{,3G} boards and their dts files.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46615
John Crispin [Mon, 17 Aug 2015 05:57:41 +0000 (05:57 +0000)]
ramips: fix Zbtlink ZBT-WR8305RT board name
There is another Zbtlink board (ZBT-WA05) supported in ramips target, so use the same naming scheme for ZBT-WR8305RT board and its dts file.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46614
John Crispin [Mon, 17 Aug 2015 05:57:18 +0000 (05:57 +0000)]
ramips: fix indentation and other mistakes in .dts{, i} files
The following patch fixes:
* wrong indentations
* doubled gpio-keys-polled nodes (DIR-300-B7, DIR-320-B1, DIR-610-A1)
* duplicate spacings
* empty lines at end of files and after last child nodes
* trailing and leading whitespace
* unnecessary and commented-out code
* missing empty lines between nodes and between properties and nodes
* unnecessary empty lines between nodes properties [1]
in .dts{,i} files, for ramips target.
[1] Some of empty lines in SOCs dtsi files were left untouched, because they seem to be there for a reason (readability?).
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46613
Hauke Mehrtens [Sun, 16 Aug 2015 20:37:47 +0000 (20:37 +0000)]
procd: fix seccomp build on some architectures
fix generating syscall-names.h
Sometimes the syscall number is not defined with a number but with an
offset to an other syscall and then make_syscall_h.sh created some
broken header file.
For example the bit/syscall.h from musl for i386 has this:
#define __NR_timer_create 259
#define __NR_timer_settime (__NR_timer_create+1)
With this patch the resulting array looks like this:
[259] = "timer_create",
[(__NR_timer_create+1)] = "timer_settime",
This closes #20195.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46612
Hauke Mehrtens [Sun, 16 Aug 2015 20:20:36 +0000 (20:20 +0000)]
toolchain: gcc: add gcc 5.2.0
This was boot tested on mipsel32, arm32 and x86 only.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46611
Hauke Mehrtens [Sun, 16 Aug 2015 20:16:43 +0000 (20:16 +0000)]
ubi-utils: fix build with gcc5
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46610
Hauke Mehrtens [Sat, 15 Aug 2015 17:16:03 +0000 (17:16 +0000)]
kernel: yaffs2: update to version from 2015-06-02
In addition to the update this also fixes compile problems with kernel 4.1.
This closes #20323.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46609
Zoltan Herpai [Sat, 15 Aug 2015 15:10:14 +0000 (15:10 +0000)]
sunxi: respect CONFIG_TARGET_IMAGES_GZIP
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46608
Zoltan Herpai [Sat, 15 Aug 2015 14:56:21 +0000 (14:56 +0000)]
sunxi: create KDIR_TMP, build boot.img in it
It's nice to have a distinction between files which are built during the
normal OpenWrt build process and ones that are created by the ImageBuilder
(like it already exists on some other targets).
This also gives boot.img a profile-specific prefix as it contains profile-
specific data.
KDIR_TMP does not need to be specified since include/image.mk already sets
it.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46607
Hauke Mehrtens [Sat, 15 Aug 2015 14:49:06 +0000 (14:49 +0000)]
samba36: preserve smbpasswd across sysupgrade
Add /etc/samba/smbpasswd to list of samba conffiles
thus preserving samba passwords across sysupgrade
by default.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
SVN-Revision: 46606
Zoltan Herpai [Sat, 15 Aug 2015 14:34:42 +0000 (14:34 +0000)]
sunxi: fix uboot install location
Install uboot files to KERNEL_BUILD_DIR instead of BIN_DIR to fix
ImageBuilder. Similar fixes are necessary for many (all?) other uboot
targets.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46605
Zoltan Herpai [Sat, 15 Aug 2015 13:39:41 +0000 (13:39 +0000)]
sunxi: don't copy DTS files to BIN_DIR
The DTS files aren't useful (other targets don't copy them either) and
clutter BIN_DIR with files unrelated to the chosen profile.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46604
Hauke Mehrtens [Sat, 15 Aug 2015 11:27:11 +0000 (11:27 +0000)]
tools: xz: update to version 5.2.1
This adds support for symbol versioning which is needed on
CentOs/RedHat 7 to fix #20134.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46603
Jonas Gorski [Fri, 14 Aug 2015 15:10:54 +0000 (15:10 +0000)]
ipq806x: switch to new image build system
Switch ipq806x to the new image build system. Image files might change
slightly their names, but the generated files should not change.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46602
Jonas Gorski [Fri, 14 Aug 2015 15:10:47 +0000 (15:10 +0000)]
brcm63xx: move gzip build command to include/image.mk
Allow other targets to make use of it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46601
Jonas Gorski [Fri, 14 Aug 2015 15:10:42 +0000 (15:10 +0000)]
image.mk: add a fit recipe
Add a recipe to build a fit wrapped kernel (and optional dtb).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46600
Jonas Gorski [Fri, 14 Aug 2015 15:10:11 +0000 (15:10 +0000)]
ipq806x: disable dma for spi on linux 4.1 as well
Linux 4.1 is also affected from the dma issue, so remove the dma
proprties there as well.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46599
Jonas Gorski [Fri, 14 Aug 2015 13:06:33 +0000 (13:06 +0000)]
kernel: update 4.1 to 4.1.5
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.5
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46598
Jonas Gorski [Fri, 14 Aug 2015 13:05:22 +0000 (13:05 +0000)]
image.mk: store the device name variable
Make the device name accessible for any build commands instead of
forcing targets to define it themselves.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46597
Jonas Gorski [Fri, 14 Aug 2015 13:05:14 +0000 (13:05 +0000)]
image.mk: replace all Build/netgear-chk with a generic implementation
Instead of letting each target define it themselves, create on in
include/image.mk and let the targets use it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46596
Jonas Gorski [Fri, 14 Aug 2015 13:04:43 +0000 (13:04 +0000)]
brcm63xx: prefix netgear specific device variables with NETGEAR_
Rename BOARD_ID to NETGEAR_BOARD_ID.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46595
Jonas Gorski [Fri, 14 Aug 2015 13:04:22 +0000 (13:04 +0000)]
brcm47xx: prefix netgear specific device variables with NETGEAR_
Rename BOARD_ID to NETGEAR_BOARD_ID and REGION to NETGEAR_REGION.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46594
Jonas Gorski [Fri, 14 Aug 2015 13:03:36 +0000 (13:03 +0000)]
bcm53xx: prefix netgear specific device variables with NETGEAR_
Rename BOARD_ID to NETGEAR_BOARD_ID and REGION to NETGEAR_REGION.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46593
Jonas Gorski [Fri, 14 Aug 2015 10:20:53 +0000 (10:20 +0000)]
image.mk: move KDIR_TMP definition to a central location
Instead of each target defining it the same, move the KDIR_TMP
definition to include/image.mk. In addition Image/Build/SysupgradeNAND
already requires KDIR_TMP to be set, so it makes sense to have it
globally defined.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46592
Felix Fietkau [Thu, 13 Aug 2015 19:02:26 +0000 (19:02 +0000)]
image: fix handling of per-device kernel build commands
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46589
Felix Fietkau [Thu, 13 Aug 2015 19:02:21 +0000 (19:02 +0000)]
oprofile: fix path to kernel headers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46588
Felix Fietkau [Thu, 13 Aug 2015 19:02:16 +0000 (19:02 +0000)]
ipq806x: disable DMA on the SPI flash
Previous patch
6f2905eeb6ce5ddec8d12d677e1f377a940b537b enabled ADM in
the kernel, which causes a kernel panic when accessing the SPI flash.
As a workaround, We'll disable DMA for the flash for now. It was not
enabled previously anyway so we'll just leave it as is.
Reported-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46587
Rafał Miłecki [Wed, 12 Aug 2015 13:29:22 +0000 (13:29 +0000)]
brcm47xx: fix reading WGT634U CFE variables
We got check for nvram_len placed too early and the code never tried
reading CFE variables used on WGT634U. This is a regression introduced
in r45942 and reported in #20291.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46584
Rafał Miłecki [Wed, 12 Aug 2015 00:57:53 +0000 (00:57 +0000)]
base-files: buttons: make power script return 0
It was missed in the r46471.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46582
Rafał Miłecki [Mon, 10 Aug 2015 22:48:07 +0000 (22:48 +0000)]
procd: switch buttons to the new "button" hotplug handler
This allows requesting "timeout" ACTION in script by returning a
positive value.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46580
Rafał Miłecki [Mon, 10 Aug 2015 21:56:54 +0000 (21:56 +0000)]
procd: update to the latest version, add "button" hotplug handler
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46578
Hauke Mehrtens [Sun, 9 Aug 2015 17:18:10 +0000 (17:18 +0000)]
kernel: crypto: fix depends in kmod-crypto-hmac
This module had two depends lines.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46576
Hauke Mehrtens [Sun, 9 Aug 2015 17:17:51 +0000 (17:17 +0000)]
kernel: crypto: fix module loading of cryptomgr.ko
There was no rule to load this module.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46575
Hauke Mehrtens [Sun, 9 Aug 2015 17:17:31 +0000 (17:17 +0000)]
kernel: crypto: fix module loading of aead.ko
The name of the module was wrong before.
This should fix #20283.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46574
Zoltan Herpai [Sun, 9 Aug 2015 15:12:07 +0000 (15:12 +0000)]
kernel: add missing symbols for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46573
Hauke Mehrtens [Sun, 9 Aug 2015 12:36:24 +0000 (12:36 +0000)]
ar71xx: export some clock functions used by some modules
This fixes this linking problem:
ERROR: "clk_set_rate" [drivers/usb/phy/phy-generic.ko] undefined!
ERROR: "clk_round_rate" [drivers/media/v4l2-core/videodev.ko] undefined!
ERROR: "clk_set_rate" [drivers/media/v4l2-core/videodev.ko] undefined!
In the upstream kernel it is fixed here:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=
411520af8ec9456886359b42628e583ac58e7e44
This closes: #20162, #20172, #20196, #20197, #20202 and #20308
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46572
Zoltan Herpai [Sun, 9 Aug 2015 12:25:18 +0000 (12:25 +0000)]
sunxi: add support for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46571
Hauke Mehrtens [Sun, 9 Aug 2015 11:09:52 +0000 (11:09 +0000)]
kernel: update 3.18 to 3.18.20
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46570
Felix Fietkau [Fri, 7 Aug 2015 08:36:36 +0000 (08:36 +0000)]
ipq806x: enable NAND flash support in the kernel
Previous patch set backported the recently posted NAND flash driver to
3.18 and 4.1 kernel. This patch now enables it in the kernel config.
There is no change to the partition layout and init yet. But the NAND
flash can be seen in the mtd list on an AP148:
root@OpenWrt:/# cat /proc/mtd
dev: size erasesize name
mtd0:
10000000 00020000 "qcom-nandc"
...
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46569
Felix Fietkau [Fri, 7 Aug 2015 08:36:31 +0000 (08:36 +0000)]
ipq806x: add NAND flash controller support
These patches add support for ipq806x NAND flash controller. Most of
these are cherry-picked & backported from LKML:
*https://lkml.org/lkml/2015/8/3/16
This patch just modifies the kernel code, but doesn't change the config.
It should be harmless.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46568
Felix Fietkau [Fri, 7 Aug 2015 08:36:16 +0000 (08:36 +0000)]
ipq806x: Add ADM support
These are cherry-picked & backported from LKML:
*https://lkml.org/lkml/2015/3/17/19
They are enabled on both 3.18 and 4.1 kernel. Patches 150 to 154 are
applying changes merged since 3.18; they enable mechanisms used by the
ADM driver.
ADM engine is used by the NAND controller, so it is necessary to
bring-up NAND flash support.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46567
Jonas Gorski [Wed, 5 Aug 2015 13:56:20 +0000 (13:56 +0000)]
mac80211: mwl8k: init devices synchronously
Make sure phys are probed and present before we detect wifis.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46566
Jonas Gorski [Wed, 5 Aug 2015 13:56:02 +0000 (13:56 +0000)]
kirkwood: add wpad-mini to router profiles
Without it the wifi isn't really usable.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46565
Jonas Gorski [Wed, 5 Aug 2015 13:55:52 +0000 (13:55 +0000)]
image: fix jffs2(_nand) image generation
Variables dependend on JFFS2_BLOCKSIZE and NANDBLOCK_SIZE are used
for template generation, so need to be present before inclusion of
image.mk in target image Makefiles.
So move all declarations to before any includes.
Fixes: r42878 ("image.mk: clean up and parallelize mkfs calls")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46564
Jonas Gorski [Wed, 5 Aug 2015 13:55:42 +0000 (13:55 +0000)]
brcm63xx: fix crash on 6358/6368 when booting from thread 1
It looks like RAC flushes cause random corruption(?) when the
second thread is set as default.
Fixes #20160.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46563
Jonas Gorski [Wed, 5 Aug 2015 13:55:37 +0000 (13:55 +0000)]
brcm63xx: Add support for Plusnet 2704N
BCM6318: add support for Plusnet / Sagem 2704N (V1)
Signed-off-by: Matt Goring <matt.goring@googlemail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46562
Jonas Gorski [Wed, 5 Aug 2015 13:55:18 +0000 (13:55 +0000)]
brcm63xx: build image for DSL-275XB D1
It boots fine, so no reason to not build it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46561
Jonas Gorski [Wed, 5 Aug 2015 13:55:14 +0000 (13:55 +0000)]
kernel: update 4.1 to 4.1.4
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[jogo: fix brcm2708 patches, refresh target patches]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46560
Felix Fietkau [Tue, 4 Aug 2015 23:10:18 +0000 (23:10 +0000)]
ipq806x: add ethernet (stmmac) support
We forgot to enable the stmmac driver for 4.1 kernel, so ethernet
interfaces don't show-up on this kernel.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46559
Felix Fietkau [Tue, 4 Aug 2015 23:10:12 +0000 (23:10 +0000)]
ipq806x: refresh kernel configs
Remove options which have been moved into the generic config ever since.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46558
Felix Fietkau [Tue, 4 Aug 2015 23:10:03 +0000 (23:10 +0000)]
ipq806x: fix freeze in PCIe code when booting with an old u-boot
Old bootloader (same ones which have DT disabled) don't perform any PCIe
initialization. The consequence is a freeze during PCIe bring-up on
these old u-boot. Same kernel with a newer bootloaders works fine as
they contain the corresponding PCIe init code.
In this change, we'll add the missing init and make sure the kernel
doesn't rely on some preexisting init to get PCIe to work. That includes
the following changes:
*GPIOs: set function & drive strength
*Clocks: add init code for aux & ref clocks
*PCIe driver: additional init of the hardware controller
Tested 3.18 and 4.1 on an AP148 with bootloader branch 0.0.1
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46557
Felix Fietkau [Tue, 4 Aug 2015 23:09:55 +0000 (23:09 +0000)]
ipq806x: fix pcie pinmux naming in ipq806x dts
PCIe controller nodes are numbers 0/1/2 in the chipset dtsi file, but
the pinmux nodes are numbers 1/2/3. We'll make it consistent by changing
the pinmux numbering to match the controller's one.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46556
Felix Fietkau [Tue, 4 Aug 2015 23:09:43 +0000 (23:09 +0000)]
ipq806x: add support for non-dt enabled ap148 bootloader
Certain AP148 platforms (and derivative) use bootloaders which did not
have DT enabled.
In order to support these old platforms, we'll now make the following
modifications:
*explicitely add the memory node in the AP148 DT: this used to be added
by new u-boot through a run-time patch mechanism. We'll now add it
explicitely so it works on boots which don't support that feature. New
boots will have the node twice, the second one will be ignored.
*add the zImage generation next to the FIT image for AP148.
Other platforms using non-DT enabled bootloaders may want to leverage
this zImage code to generate their own firmare as well.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46555
Felix Fietkau [Tue, 4 Aug 2015 23:09:38 +0000 (23:09 +0000)]
ipq806x: update bleeding-edge kernel from 4.0 to 4.1
Default kernel doesn't change and stays on 3.18 for now.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46554
Felix Fietkau [Tue, 4 Aug 2015 23:09:28 +0000 (23:09 +0000)]
ar71xx: remove linux 3.18 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46553
Hauke Mehrtens [Mon, 3 Aug 2015 20:49:37 +0000 (20:49 +0000)]
acx-mac80211: update git url
use URL scheme documented at http://sourceforge.net/p/forge/documentation/Git/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46552
Hauke Mehrtens [Mon, 3 Aug 2015 20:34:28 +0000 (20:34 +0000)]
cyassl: the upstream package in version 4.6.0 changed
Update the md5sum to the new version.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46551
Hauke Mehrtens [Mon, 3 Aug 2015 20:33:57 +0000 (20:33 +0000)]
dnsmasq: Bump to dnsmasq2.75
Fixes a 100% cpu usage issue if using dhcp-script.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46550
Felix Fietkau [Sun, 2 Aug 2015 15:30:35 +0000 (15:30 +0000)]
ar71xx: Fix gpio_count setting for QCA953x in ath79_gpio_output_select
Reported-by: Steve Brown <sbrown@cortland.com>
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46547
Felix Fietkau [Sun, 2 Aug 2015 15:08:14 +0000 (15:08 +0000)]
ramips: Fix Ticket #20153 swap radio calibration data pointers on the RE6500
This patch fixes weak radio signal reported by nikola.georgiev
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 46545
Felix Fietkau [Sun, 2 Aug 2015 15:06:54 +0000 (15:06 +0000)]
ar71xx: fix lzma-loader kernel command line passing
The generic kernel cmdline parser ignores argv[0], this caused a
regression for all lzma-loader based boards with linux 4.1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46544
Felix Fietkau [Sun, 2 Aug 2015 07:40:12 +0000 (07:40 +0000)]
build: disable kernel stack protector support for i386/x86_64
When stack protector support is disabled in libc (always the case for
!musl), gcc assumes that it needs to use __stack_chk_guard for the stack
canary.
This causes kernel build errors, because the kernel is only set up to
handle TLS stack canaries.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46543
Felix Fietkau [Sat, 1 Aug 2015 15:13:10 +0000 (15:13 +0000)]
ar71xx: fix mr3220 device profile (#19990)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46541
Zoltan Herpai [Fri, 31 Jul 2015 21:58:31 +0000 (21:58 +0000)]
packages: uboot-sunxi: bump to 2015.07 - switch to using kernel-supplied dtc - refresh olimex-a13-som and lamobo-r1 patches (compile-tested only)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46540
Zoltan Herpai [Fri, 31 Jul 2015 21:49:37 +0000 (21:49 +0000)]
kernel: add missing symbol for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46539
Felix Fietkau [Fri, 31 Jul 2015 20:55:30 +0000 (20:55 +0000)]
bcm53xx: allow device tree to override SPI flash partition layout
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46538
Zoltan Herpai [Fri, 31 Jul 2015 19:50:05 +0000 (19:50 +0000)]
sunxi: fix networking on Olimex A20 Micro
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46536
Felix Fietkau [Fri, 31 Jul 2015 19:49:27 +0000 (19:49 +0000)]
mac80211: restore AP scan patch
Signed-off-by: Dmitry Ivanov <dima@ubnt.com>
SVN-Revision: 46535
Felix Fietkau [Fri, 31 Jul 2015 19:49:22 +0000 (19:49 +0000)]
iw: update to version 4.1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46534
Felix Fietkau [Fri, 31 Jul 2015 19:49:17 +0000 (19:49 +0000)]
mac80211: fix an invalid read in minstrel rate sorting
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46533
Felix Fietkau [Fri, 31 Jul 2015 19:49:09 +0000 (19:49 +0000)]
mac80211: fix data alignment of management frames / beacons
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46532
Imre Kaloz [Fri, 31 Jul 2015 18:23:28 +0000 (18:23 +0000)]
mvebu: update dts files for mamba / WRT1900AC
Fix for default button states in WRT1900AC dts files.
This prevents overlay wipe when reset is pressed.
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
SVN-Revision: 46530
Zoltan Herpai [Fri, 31 Jul 2015 18:14:59 +0000 (18:14 +0000)]
kernel: add a few missing symbols for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46529
Imre Kaloz [Fri, 31 Jul 2015 18:08:12 +0000 (18:08 +0000)]
mvebu: fix gpio config on the WRT1200AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46527
Zoltan Herpai [Fri, 31 Jul 2015 12:25:35 +0000 (12:25 +0000)]
mxs: switch to 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46526
Zoltan Herpai [Fri, 31 Jul 2015 12:22:12 +0000 (12:22 +0000)]
mxs: add support for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46525
Zoltan Herpai [Fri, 31 Jul 2015 11:58:24 +0000 (11:58 +0000)]
mxs: build sound-soc-mxs only on 3.18 for now
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46524
Zoltan Herpai [Fri, 31 Jul 2015 11:52:48 +0000 (11:52 +0000)]
packages: uboot-mxs: bump to 2015.07, refresh Duckbill patch
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46523
Steven Barth [Thu, 30 Jul 2015 08:53:43 +0000 (08:53 +0000)]
dnsmasq: Bump to dnsmasq2.74
Bump to dnsmasq2.74 & refresh patches to fix fuzz
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
SVN-Revision: 46522
Imre Kaloz [Thu, 30 Jul 2015 06:41:25 +0000 (06:41 +0000)]
mwlwifi: upgrade to latest rev with fixed firmware
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46520
Felix Fietkau [Wed, 29 Jul 2015 16:01:55 +0000 (16:01 +0000)]
mt76: update to the latest version, fixes more tx power related issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46519
Steven Barth [Wed, 29 Jul 2015 06:13:15 +0000 (06:13 +0000)]
odhcp6c: minor fixes
Better synchronize RA & DHCPv6 events
Accumulate some events to avoid flooding
Restart softwires for address and prefix changes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46518
Luka Perkov [Tue, 28 Jul 2015 21:54:44 +0000 (21:54 +0000)]
openssl: add one more mirror
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 46517
Jo-Philipp Wich [Mon, 27 Jul 2015 23:45:15 +0000 (23:45 +0000)]
sdk: provide explicit CONFIG_MODULES kconfig symbol
Extend the SDK Config.in file to explicitely declare a MODULES symbol with
the "option modules" flag set in order to prevent a kconfig segmentation fault
whenever a "depends m" dependency is encountered.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46514
Felix Fietkau [Mon, 27 Jul 2015 18:46:42 +0000 (18:46 +0000)]
mt76: update to the latest version, fixes some compile errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46513
Steven Barth [Mon, 27 Jul 2015 11:47:20 +0000 (11:47 +0000)]
firewall: fix typo in ESP rule
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46506
Hauke Mehrtens [Sun, 26 Jul 2015 15:53:44 +0000 (15:53 +0000)]
oprofile: update to 1.1.0-rc2 and make it work with musl
This brings oprifle to version 1.1.0-rc2 and adds some fixes for musl.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46505
Hauke Mehrtens [Sun, 26 Jul 2015 15:52:59 +0000 (15:52 +0000)]
bcm53xx: update Disable MMU and Dcache during decompression
This replaces the old patch with the version from Florian.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46504
Hauke Mehrtens [Sun, 26 Jul 2015 15:52:34 +0000 (15:52 +0000)]
kernel: add missing CONFIG_ARM_CCI400_PMU config option
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46503
Hauke Mehrtens [Sun, 26 Jul 2015 15:52:17 +0000 (15:52 +0000)]
gpio-button-hotplug: handle EPROBE_DEFER and other errors
of_get_gpio_flags() could return an error like EPROBE_DEFER which was
not handled before. This patch takes the code from gpio_keys_polled.c
for error handling and also improves some other unrelated small parts.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46502
Hauke Mehrtens [Sun, 26 Jul 2015 15:51:59 +0000 (15:51 +0000)]
kernel: add CONFIG_REGMAP_MMIO config option
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46501
Hauke Mehrtens [Sun, 26 Jul 2015 15:51:37 +0000 (15:51 +0000)]
bcm53xx: update config
This activates CONFIG_MULTIUSER and sets the maximal number of cpus to 2.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46500
Felix Fietkau [Sun, 26 Jul 2015 13:01:43 +0000 (13:01 +0000)]
ramips: swap radio calibration data pointers for DIR-860L
Fixes low 5 GHz tx power issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46497
Felix Fietkau [Sun, 26 Jul 2015 11:42:27 +0000 (11:42 +0000)]
image: fix device variable exports for initramfs images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46496
Hauke Mehrtens [Sun, 26 Jul 2015 09:16:03 +0000 (09:16 +0000)]
kernel: add kmod-lp again
This was deactivated in r21954 because it depended on kernel 2.4, but
this module also compiles with kernel 3.18.
This closes #20199.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46495
Hauke Mehrtens [Sat, 25 Jul 2015 13:41:21 +0000 (13:41 +0000)]
kernel: cdc_ncm: Add support for moving NDP to end of NCM frame
This patch was missing for kernel 4.0 and 4.1 in r46464. I also
replaced the version in OpenWrt with the version which went upstream
into the Linux mainline kernel.
This closes #20193 and #20192
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46493
Hauke Mehrtens [Sat, 25 Jul 2015 13:40:43 +0000 (13:40 +0000)]
mac80211: do not add debugfs_create_devm_seqfile() on recent kernel versions
An #ifdef for the kernel version was missing around the header of
debugfs_create_devm_seqfile() and the LINUX_BACKPORT() was also not
done.
This closes #20181
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46492
Jonas Gorski [Sat, 25 Jul 2015 12:12:28 +0000 (12:12 +0000)]
opkg: ensure image provided feeds are available after sysupgrade
Split the opkg.conf into three files, to make it easier to support custom
feeds and configs:
* /etc/opkg.conf -> base opkg configuration
* /etc/opkg/distfeeds.conf -> default Openwrt package feeds
* /etc/opkg/customfeeds.conf -> custom package feeds
Of these three, only the base opkg.conf and the customfeeds.conf is marked
as to be kept, so that the distfeeds.conf from the image is always used.
To ease migration, a script is added that moves any feeds from /etc/opkg.conf
to /etc/opkg/customfeeds.conf on first boot.
Also ensure that any keys used for verification are also kept in upgrade.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46491
Jonas Gorski [Sat, 25 Jul 2015 12:12:11 +0000 (12:12 +0000)]
brcm63xx: switch to new image building system
Switches BCM63xx to the new IB system.
Images are generated per device definitions.
There are no changes in the produced images except for some name changes,
caused by the new IB system.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46490
projects / openwrt / staging / lynxis.git / log