media: replace bellow -> below

Bellow is yelling. Ok, sometimes the code is yells a lot, but
but this is not the case there ;)

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] saa7164: fix compiler warning

drivers/media/pci/saa7164/saa7164-dvb.c: In function ‘saa7164_dvb_register’:
drivers/media/pci/saa7164/saa7164-dvb.c:701:7: warning: ‘client_tuner’ may be used uninitialized in this function [-Wmaybe-uninitialized]
    if (!client_tuner || !client_tuner->dev.driver)
       ^

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l2: replace s_mbus_fmt by set_fmt in bridge drivers

Replace all calls to s_mbus_fmt in bridge drivers by calls to the
set_fmt pad op.

Remove the old try/s_mbus_fmt video ops since they are now no longer used.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l2: replace try_mbus_fmt by set_fmt in bridge drivers

Replace all calls to try_mbus_fmt in bridge drivers by calls to the
set_fmt pad op.

[mchehab@osg.samsung.com: fix a merge conflict at mcam-core.c]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l2: replace s_mbus_fmt by set_fmt

The s_mbus_fmt video op is a duplicate of the pad op. Replace all uses
in sub-devices by the set_fmt() pad op.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l2: replace try_mbus_fmt by set_fmt

The try_mbus_fmt video op is a duplicate of the pad op. Replace all uses
in sub-devices by the set_fmt() pad op.

Since try_mbus_fmt and s_mbus_fmt both map to the set_fmt pad op (but
with a different 'which' argument), this patch will replace both
try_mbus_fmt and s_mbus_fmt by set_fmt.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt

The g_mbus_fmt video op is a duplicate of the pad op. Replace all uses
by the get_fmt pad op and remove the video op.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Cc: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l2: replace enum_mbus_fmt by enum_mbus_code

Replace all calls to the enum_mbus_fmt video op by the pad
enum_mbus_code op and remove the duplicate video op.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kamil Debski <k.debski@samsung.com>
Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

dt3155: fix CodingStyle issues

There are a few lines longer than 80 cols for no good reason.
Fix them sooner than latter, making checkpatch.pl happy.

Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dt3155: add GFP_DMA32 flag to vb2 queue

Ensure that buffers are allocated from the DMA32 zone since this
device only handles 32 bit DMA addresses.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dt3155: move out of staging into drivers/media/pci

The dt3155 code is now in good shape, so move it out of staging into
drivers/media/pci. Mark in MAINTAINERS that I'll do Odd Fixes for this
driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dt3155v4l: support inputs VID0-3

The dt3155 together with the J1 breakout cable supports 4 inputs. Add
support for all inputs VID0 - VID3. Note that input VID0 is shared with
input J2.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dt3155v4l: fix format handling

Fix various v4l2-compliance issues regarding format handling.

Main problem was a missing colorspace value and incorrect format
checks. This driver supports a single format only.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dt3155v4l: drop CONFIG_DT3155_CCIR, use s_std instead

There is no need for CONFIG_DT3155_CCIR to select between 50/60 Hz,
that's why we have s_std.

Since this is a simple framegrabber there is no need for g/s_parm.
The frame period can be obtained via ENUMSTD instead.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dt3155v4l: correctly start and stop streaming

Don't start streaming when a buffer is queued, instead implement the
start_streaming op and do it there, leaving it up to the vb2 framework
to call start_streaming when enough buffers have been queued.

And don't stop streaming from within the interrupt routine, instead do
that in stop_streaming.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dt3155v4l: drop CONFIG_DT3155_STREAMING

No need to do this as a config option. Just support both MMAP and read()
methods like any other driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dt3155v4l: move vb2_queue to top-level

Instead of initializing the vb2_queue in open (and freeing in release)
do this in probe/remove instead. And as a bonus use the vb2 helper
functions to greatly simplify the driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dt3155v4l: remove bogus single-frame capture in init_board

For some weird reason an attempt is made in init_board to capture a
single frame. No clue why, and everything works fine without that
code.

I suspect this was test code that was never removed.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dt3155v4l: remove pointless dt3155_alloc/free_coherent

No idea what the purpose is of these functions. I suspect this was used
once upon a time to pre-allocate buffer memory. But the allocated memory
isn't used anywhere anymore, so just remove this code.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dt3155v4l: add v4l2_device support

Add struct v4l2_device and register it. Also move the request_irq to
probe instead of doing that in open().

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dt3155v4l: remove unused statistics

Remove struct dt3155_stats since it isn't used.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dt3155v4l: code cleanup

- Fix various spelling mistakes
- Whitespace cleanups
- Remove _ioc_ from ioctl names to shorten those names
- Remove bogus ifdef __KERNEL__
- Remove commented out code

No actual code is changed in this patch.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: fix memory leak on failure path in cafe_smbus_setup()

If i2c_add_adapter() fails, adap is not deallocated.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: fix V4L2_PIX_FMT_SBGGR8 support

The REG_CTRL0 register was never written if this format was selected,
instead an error was logged and whatever was last set in that register
was used.

Surprisingly, that seems to work if YUYV was selected, but we should
program this register explicitly.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: drop support for PIX_FMT_422P

I cannot get this format to work, the colors keep coming out wrong.
Since this has never worked I just drop support for this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: fix the bytesperline and sizeimage calculations

These were calculated incorrectly for the planar formats.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ov7670: use colorspace SRGB instead of JPEG

Even though the format is Y'CbCr, the colorspace used by the sensor
is almost certainly SRGB. The sensor is also not generating JPEG data,
so it makes no sense to use V4L2_COLORSPACE_JPEG here.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: drop V4L2_PIX_FMT_JPEG dead code

This driver appeared to support the JPEG format when in reality
that was just dead code. Remove it.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: add planar support to dma-vmalloc

The dma-vmalloc implementation didn't support planar formats, but with
a little bit of refactoring that is easy to fix.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: correctly requeue buffers

If start_streaming fails or stop_streaming is called, then all queued
buffers need to be given back to vb2.

This prevents vb2 from calling WARN_ON when it detects that this is not
done correctly.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: fix streaming issues

- fill in timestamp
- fill in field
- start the sequence counter at 0, not 1

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: add DMABUF support for all three DMA modes

Add VB2_DMABUF and VIDIOC_EXPBUF support. Also add VB2_USERPTR support
for the vmalloc DMA mode which was missing for no good reason.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: add create_bufs support

This fixes the final v4l2-compliance warning.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: use vb2 helpers and core locking

Use the V4L2 core locking system instead of rolling your own. Switch to
the vb2 fop and ioctl helpers to get rid of a lot of code. This also made
it easy to add VB2_READ to the DMA modes, since you get read() for free
with vb2 and these helpers.

Finally remove the users field: this information is also available from
the core framework, no need to keep track of it in the driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: implement control events

Now that this driver uses v4l2_fh, it is trivial to add support for
control events. Again, this fixes a v4l2-compliance failure.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: switch to struct v4l2_fh

Use struct v4l2_fh to represent a filehandle. This fixes the missing
g/s_priority handling of this driver that v4l2-compliance complained
about.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: control handler fixes

No controls were reported, even though the ov7670 does have controls.

Two reasons for this: the v4l2_ctrl_handler_init() call must come
before the ov7670 is loaded (otherwise the ov7670 won't know that
its controls should be added to the bridge driver), and the
v4l2_ctrl_handler_free() call at the end should only be called if
the ret value is non-zero (otherwise you would just free all the
controls that were just added).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: fill in colorspace

The colorspace field wasn't filled in properly. This fixes a v4l2-compliance
failure.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ov7670: check for valid width/height in ov7670_enum_frame_interval

The width and height should be checked in the enum_frame_interval
op. This fixes a v4l2-compliance failure.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: webcam drivers shouldn't support g/s_std

TV standards make no sense for webcam drivers, so drop these dummy
functions. This stops v4l2-compliance from complaining about this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: fill in bus_info

The bus_info field of struct v4l2_querycap wasn't filled in and
v4l2-compliance complained about that. Fix this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: fix vb2 warning

We must set timestamp_flags in vb2_queue otherwise vb2 will complain
loudly about it.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] usbtv: fix v4l2-compliance issues

Running v4l2-compliance on my usbtv stick revealed two failures:

1) Correct handling of CREATE_BUFS in usbtv_queue_setup was missing. Added this.
2) The sequence counter wasn't reset to 0 when starting streaming.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cx18: add missing caps for the PCM video device

The cx18 PCM video device didn't have any capabilities set, which caused a warnings
in the v4l2 core:

[    6.229393] ------------[ cut here ]------------
[    6.229414] WARNING: CPU: 1 PID: 593 at
drivers/media/v4l2-core/v4l2-ioctl.c:1025 v4l_querycap+0x41/0x70
[videodev]()
[    6.229415] Modules linked in: cx18_alsa mxl5005s s5h1409
tuner_simple tuner_types cs5345 tuner intel_rapl iosf_mbi
x86_pkg_temp_thermal coretemp raid1 snd_hda_codec_realtek kvm_intel
snd_hda_codec_generic snd_hda_codec_hdmi kvm snd_oxygen(+) snd_hda_intel
snd_oxygen_lib snd_hda_controller snd_hda_codec snd_mpu401_uart iTCO_wdt
snd_rawmidi iTCO_vendor_support snd_hwdep crct10dif_pclmul crc32_pclmul
crc32c_intel snd_seq cx18 snd_seq_device ghash_clmulni_intel
videobuf_vmalloc tveeprom cx2341x snd_pcm serio_raw videobuf_core vfat
dvb_core fat v4l2_common snd_timer videodev snd lpc_ich i2c_i801 joydev
mfd_core mei_me media soundcore tpm_infineon soc_button_array tpm_tis
mei shpchp tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc binfmt_misc
i915 nouveau mxm_wmi wmi e1000e ttm i2c_algo_bit drm_kms_helper
[    6.229444]  drm ptp pps_core video
[    6.229446] CPU: 1 PID: 593 Comm: v4l_id Not tainted
3.19.3-200.fc21.x86_64 #1
[    6.229447] Hardware name: Gigabyte Technology Co., Ltd.
Z87-D3HP/Z87-D3HP-CF, BIOS F6 01/20/2014
[    6.229448]  0000000000000000 00000000d12b1131 ffff88042dacfc28
ffffffff8176e215
[    6.229449]  0000000000000000 0000000000000000 ffff88042dacfc68
ffffffff8109bc1a
[    6.229451]  ffffffffa0594000 ffff88042dacfd90 0000000000000000
ffffffffa04e2140
[    6.229452] Call Trace:
[    6.229466]  [<ffffffff8176e215>] dump_stack+0x45/0x57
[    6.229469]  [<ffffffff8109bc1a>] warn_slowpath_common+0x8a/0xc0
[    6.229472]  [<ffffffff8109bd4a>] warn_slowpath_null+0x1a/0x20
[    6.229474]  [<ffffffffa04ca401>] v4l_querycap+0x41/0x70 [videodev]
[    6.229477]  [<ffffffffa04ca6cc>] __video_do_ioctl+0x29c/0x320 [videodev]
[    6.229479]  [<ffffffff81227131>] ? do_last+0x2f1/0x1210
[    6.229491]  [<ffffffffa04cc776>] video_usercopy+0x366/0x5d0 [videodev]
[    6.229494]  [<ffffffffa04ca430>] ? v4l_querycap+0x70/0x70 [videodev]
[    6.229497]  [<ffffffffa04cc9f5>] video_ioctl2+0x15/0x20 [videodev]
[    6.229499]  [<ffffffffa04c6794>] v4l2_ioctl+0x164/0x180 [videodev]
[    6.229501]  [<ffffffff8122e298>] do_vfs_ioctl+0x2f8/0x500
[    6.229502]  [<ffffffff8122e521>] SyS_ioctl+0x81/0xa0
[    6.229505]  [<ffffffff81774a09>] system_call_fastpath+0x12/0x17
[    6.229506] ---[ end trace dacd80d4b19277ea ]---

Added the necessary capabilities to stop this warning.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Laura Abbott <labbott@redhat.com>
Cc: <stable@vger.kernel.org> # for v3.19 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

saa7164: Fix CodingStyle issues added on previous patches

The patches that added support for HVR2255 and HVR2205 added
some CodingStyle issues.

Better to fix it sooner than latter.

Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] saa7164: fix querycap warning

Fix the VIDIOC_QUERYCAP warning due to the missing device_caps. Don't fill
in the version field, the V4L2 core will do that for you.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v3.19 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] saa7164: fix HVR2255 ATSC inversion issue

QAM mode in the LGDT3306 auto detects inversion. VSB does not.
Forgot to include tis fact in the original patch set.
Tested with QAM and VSB after this patch, working fine.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] saa7164: Copyright update

Updates the copyright notes at the saa7164 driver.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] saa7164: Add Digital TV support for the HVR2255 and HVR2205

Adding support for the Hauppauge HVR2255 and Hauppauge HVR2205
PCIe cards. Digital TV for DVB-T and ATSC/US-Cable is known to
work. Support for analog RF tuners does not work due to
a lack of analog support in the upstream SI2157 driver.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] saa7164: Improvements for I2C handling

Workaround oddball I2C issues caused by using newer
SILABS devices.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] saa7164: Adding additional I2C debug

Assists with debugging difficult I2C devices.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] saa7164: I2C improvements for upcoming HVR2255/2205 boards

SI2168/SI2157 issue single byte address reads. Add support
for these.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] i2c: ov2659: signedness bug inov2659_set_fmt()

This needs to be signed or there is a risk of hitting a forever loop.

Fixes: c4c0283ab3cd ('[media] media: i2c: add support for omnivision's ov2659 sensor')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] vb2: Push mmap_sem down to memops

Currently vb2 core acquires mmap_sem just around call to
__qbuf_userptr(). However since commit f035eb4e976ef5 (videobuf2: fix
lockdep warning) it isn't necessary to acquire it so early as we no
longer have to drop queue mutex before acquiring mmap_sem. So push
acquisition of mmap_sem down into .get_userptr and .put_userptr memops
so that the semaphore is acquired for a shorter time and it is clearer
what it is needed for.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l2-dv-timings: replace hsync magic number with a macro

This change will not change timing calculation. In CVT generator
spreadsheet the nominal value of hsync (as a percentage of line)
is 8 percent.

Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l2-dv-timings: add sanity checks in cvt,gtf calculations

Wrong values of hfreq and image height can lead to strange timings.
Avoid timing calculations for such values.

Suggested By: Martin Bugge <marbugge@cisco.com>

Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l2-dv-timings: fix rounding in hblank and hsync calculation

Changed the rounding calculation for hblank and hsync to match it
to equations in cvt and gtf standards.

In cvt calculation, hsync needs to be rounded down.

In gtf calculations, hblank needs to be rounded to nearest multiple
of twice the cell granularity and hsync needs to be rounded to the
nearest multiple of cell granularity.

Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l2-dv-timings: fix rounding error in vsync_bp calculation

Changed the rounding offsets used in vsync_bp calculation in cvt and
gtf timings. The results for vsync_bp should now match with results
from timing generator spreadsheets for cvt and gtf standards.

In the vsync_bp calculation for cvt, always round down the value of
(CVT_MIN_VSYNC_BP / h_period_est) and then add 1. It thus, reflects
the equation used in timing generator spreadsheet. Using 1999999 as
rounding offset, could pontentially lead to bumping up the vsync_bp
value by extra 1.

In the vsync_bp calculations for gtf, instead of round up or round
down, round the (CVT_MIN_VSYNC_BP / h_period_est) to the nearest
integer.

Thanks to Martin Bugge <marbugge@cisco.com> for validating with
standards and suggestions on equations.

Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] Input: TOUCHSCREEN_SUR40 should depend on HAS_DMA

If NO_DMA=y:

    warning: (TOUCHSCREEN_SUR40 && VIDEO_TW68 && VIDEO_CX23885 && VIDEO_CX25821 && VIDEO_CX88 && VIDEO_SAA7134) selects VIDEOBUF2_DMA_SG which has unmet direct dependencies (MEDIA_SUPPORT && HAS_DMA)

    ERROR: "dma_unmap_sg" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!
    ERROR: "dma_map_sg" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!
    ERROR: "dma_sync_sg_for_cpu" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!

TOUCHSCREEN_SUR40 selects VIDEOBUF2_DMA_SG, which bypasses its
dependency on HAS_DMA.  Make TOUCHSCREEN_SUR40 depend on HAS_DMA to fix
this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: VIDEOBUF2_DMA_SG should depend on HAS_DMA

If NO_DMA=y:

    ERROR: "dma_unmap_sg" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!
    ERROR: "dma_map_sg" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!
    ERROR: "dma_sync_sg_for_cpu" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!

VIDEOBUF2_DMA_SG cannot be enabled manually by the user, it's always
selected automatically by drivers that need it. Several of those drivers
already have an explicit dependency on HAS_DMA.

Make VIDEOBUF2_DMA_SG depend on HAS_DMA. This makes it easier to find
drivers that select VIDEOBUF2_DMA_SG without depending on HAS_DMA, as
Kconfig will give a warning.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: xilinx: VIDEO_XILINX should depend on HAS_DMA

If NO_DMA=y:

    warning: (VIDEO_XILINX && VIDEO_DM365_VPFE && VIDEO_DT3155 && VIDEO_OMAP4) selects VIDEOBUF2_DMA_CONTIG which has unmet direct dependencies (MEDIA_SUPPORT && HAS_DMA)

    media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_mmap’:
    media/v4l2-core/videobuf2-dma-contig.c:207: error: implicit declaration of function ‘dma_mmap_coherent’
    media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_get_base_sgt’:
    media/v4l2-core/videobuf2-dma-contig.c:390: error: implicit declaration of function ‘dma_get_sgtable’

VIDEO_XILINX selects VIDEOBUF2_DMA_CONTIG, which bypasses its dependency
on HAS_DMA.  Make VIDEO_XILINX depend on HAS_DMA to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] DocBook/media: Improve G_EDID specification

When using VIDIOC_G_EDID there is a special case where start_blocks and
blocks are both set to 0. In that case the driver just has to set blocks to
the total number of available blocks and return 0.

Even though the drivers do this right and v4l2-compliance tests for it, it
turned out not to be documented in the spec. Fix this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] DocBook/media: fix typo

Fix copy-and-paste errors:

Source -> Process

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] drx-j: Misspelled comment corrected

Fix several typos inside the driver's comments.

Signed-off-by: Cheolhyun Park <pch851130@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: adv7604: Fix masks used for querying timings in ADV7611

All masks for timings are different between ADV7604 and ADV7611.
Most of the values have 1 precision bit more in the latter.
Fix this by adding new fields to the chip_info structure.

Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] radio: fix error return code

Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] as102: fix error return code

Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] si4713: fix error return code

Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] bttv: fix missing irq after reloading driver

If pci_disable_device() isn't called when the driver is removed, then
the next time when it is loaded the irq isn't found.

I'm pretty sure this used to work in the past, but calling
pci_disable_device() is clearly the correct method and this makes
it work again.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cx88: v4l2-compliance fixes

Fix three v4l2-compliance failures:

- the colorspace wasn't set in vidioc_try_fmt_vid_cap().
- the field wasn't set in v4l2_buffer when vb2_buffer_done() was called.
- the sequence wasn't set in v4l2_buffer when vb2_buffer_done() was called.
  This fix also removes the unused buf->count field and starts the count
  at 0 instead of 1.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] vivid: drop format description

The format description is now filled in by the core, so we can
drop this in this virtual driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] vim2m: drop format description

The format description is now filled in by the core, so we can
drop this in this virtual m2m driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l2-pci-skeleton: drop format description

The format description is now filled in by the core, so we can
drop this in this skeleton driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

v4l2-ioctl: add a missing break at v4l_fill_fmtdesc()

The changeset ba3002045f8022 added a logic at the core to fill
the format description, however, a break is missing on one of
the formats, as reported by smatch:
drivers/media/v4l2-core/v4l2-ioctl.c:1211 v4l_fill_fmtdesc() warn: missing break? reassigning 'descr'

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l2-ioctl: fill in the description for VIDIOC_ENUM_FMT

The descriptions used in drivers for the formats returned with ENUM_FMT
are all over the place.

So instead allow the core to fill them in if the driver didn't. This
allows drivers to drop the description and flags.

Based on an earlier patch from Philipp Zabel:
http://comments.gmane.org/gmane.linux.drivers.video-input-infrastructure/81411

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] m2m-deinterlace: remove dead code

As reported by smatch:
drivers/media/platform/m2m-deinterlace.c:1063 deinterlace_probe() info: ignoring unreachable code.

There's no need to call v4l2_m2m_release() here, as the last possible
failure in this code is to allocate the m2m struct.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cx23885: fix bad indentation

drivers/media/pci/cx23885/altera-ci.c:762 altera_ci_init() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] vivid: fix bad indenting

drivers/media/platform/vivid/vivid-vid-out.c:1155 vivid_vid_out_g_parm() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] xirlink_cit: comment unreachable code

drivers/media/usb/gspca/xirlink_cit.c:1776 cit_start_model2() info: ignoring unreachable code.
drivers/media/usb/gspca/xirlink_cit.c:1858 cit_start_model2() info: ignoring unreachable code.
drivers/media/usb/gspca/xirlink_cit.c:1910 cit_start_model2() info: ignoring unreachable code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dw2102: fix bad indenting

drivers/media/usb/dvb-usb/dw2102.c:440 dw2104_i2c_transfer() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] af9005: fix bad indenting

drivers/media/usb/dvb-usb/af9005-fe.c:484 af9005_fe_read_status() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dib0700: fix bad indentation

drivers/media/usb/dvb-usb/dib0700_devices.c:864 dib7770_set_param_override() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] saa7134: fix bad indenting

drivers/media/pci/saa7134/saa7134-dvb.c:1682 dvb_init() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] usbvision: fix bad indentation

drivers/media/usb/usbvision/usbvision-core.c:2395 usbvision_init_isoc() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] s5p-mfc: fix bad indentation

drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c:187 s5p_mfc_alloc_codec_buffers_v5() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ttusb-dec: fix bad indentation

drivers/media/usb/ttusb-dec/ttusb_dec.c:1434 ttusb_dec_init_stb() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] bttv: fix audio hooks

as reported by smatch:
drivers/media/pci/bt8xx/bttv-audio-hook.c:201 lt9415_audio() warn: bitwise AND condition is false here
drivers/media/pci/bt8xx/bttv-audio-hook.c:241 winfast2000_audio() warn: bitwise AND condition is false here
drivers/media/pci/bt8xx/bttv-audio-hook.c:276 pvbt878p9b_audio() warn: bitwise AND condition is false here
drivers/media/pci/bt8xx/bttv-audio-hook.c:307 fv2000s_audio() warn: bitwise AND condition is false here
drivers/media/pci/bt8xx/bttv-audio-hook.c:334 windvr_audio() warn: bitwise AND condition is false here
drivers/media/pci/bt8xx/bttv-audio-hook.c:371 adtvk503_audio() warn: bitwise AND condition is false here

there are some serious issues at the audio hook implementation.

They're not following what's specified at the DocBook:
http://linuxtv.org/downloads/v4l-dvb-apis/vidioc-g-tuner.html#tuner-audmode

Basically, it was assuming that the audmode (V4L2_TUNER_MODE_foo)
is a variable with a bit maskk. However, it isn't.

The bitmask only applies to rxsubchans field (V4L2_TUNER_SUB_foo).

As the code is also too complex, and not all hooks were returning
both audmode and rxsubchans to a VIDIOC_G_TUNER, rewrite the
functions, in order to fix both for get and set tuner ioctls.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] tda10086: change typecast to u64 to avoid smatch warnings

drivers/media/dvb-frontends/tda10086.c:476 tda10086_get_frontend() warn: should 'tda10086_read_byte(state, 81) << 8' be a 64 bit type?

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] s5h1420: use only one statement per line

drivers/media/dvb-frontends/s5h1420.c:565 s5h1420_setfec_inversion() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] stv0900: fix bad indenting

drivers/media/dvb-frontends/stv0900_sw.c:1559 stv0900_search_srate_fine() warn: inconsistent indenting
drivers/media/dvb-frontends/stv0900_sw.c:2012 stv0900_algo() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cx25840: fix bad identing

drivers/media/i2c/cx25840/cx25840-core.c:974 input_change() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] pvrusb2: fix inconsistent indenting

smatch complains about multiple issues here:
drivers/media/usb/pvrusb2/pvrusb2-context.c:402 pvr2_channel_claim_stream() warn: inconsistent indenting
drivers/media/usb/pvrusb2/pvrusb2-ioread.c:240 pvr2_ioread_setup() warn: inconsistent indenting
drivers/media/usb/pvrusb2/pvrusb2-ioread.c:255 pvr2_ioread_set_enabled() warn: inconsistent indenting
drivers/media/usb/pvrusb2/pvrusb2-ioread.c:485 pvr2_ioread_read() warn: inconsistent indenting
drivers/media/usb/pvrusb2/pvrusb2-io.c:522 pvr2_stream_set_callback() warn: inconsistent indenting
drivers/media/usb/pvrusb2/pvrusb2-io.c:561 pvr2_stream_set_buffer_count() warn: inconsistent indenting
drivers/media/usb/pvrusb2/pvrusb2-io.c:640 pvr2_buffer_queue() warn: inconsistent indenting
drivers/media/usb/pvrusb2/pvrusb2-io.c:667 pvr2_buffer_set_buffer() warn: inconsistent indenting
drivers/media/usb/pvrusb2/pvrusb2-io.c:668 pvr2_buffer_set_buffer() warn: inconsistent indenting
drivers/media/usb/pvrusb2/pvrusb2-hdw.c:2614 pvr2_hdw_create() warn: inconsistent indenting
drivers/media/usb/pvrusb2/pvrusb2-hdw.c:2740 pvr2_hdw_destroy() warn: inconsistent indenting
drivers/media/usb/pvrusb2/pvrusb2-hdw.c:3353 pvr2_hdw_trigger_module_log() warn: inconsistent indenting

Let's get rid of those, in order to cleanup as much as possible the smatch error log.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] stk014: fix bad indenting

drivers/media/usb/gspca/stk014.c:279 sd_start() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] sonixj: fix bad indenting

drivers/media/usb/gspca/sonixj.c:1792 expo_adjust() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] redrat3: change return argument on redrat3_send_cmd() to int

redrat3_send_cmd() can return an error or the read data. However,
it currently returns an u8, as reported by smatch:
drivers/media/rc/redrat3.c:416 redrat3_send_cmd() warn: signedness bug returning '(-12)'

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] vp702x: comment dead code

Since the first version of this driver, the remote controller
code is disabled, adding an early return inside vp702x_rc_query().

Let's disable the code with #if 0, to remove this warning:

drivers/media/usb/dvb-usb/vp702x.c:268 vp702x_rc_query() info: ignoring unreachable code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] go7007: Comment some dead code

drivers/media/usb/go7007/go7007-usb.c:1099 go7007_usb_probe() info: ignoring unreachable code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dib0070: Fix indenting

The indentation on this driver were deadly broken. On lots
of places, it was using 4 spaces instead of tab to indent.
On other parts, it were using tabs.

Also, on several places, it were not even being properly aligned,
as reported by smatch:
drivers/media/dvb-frontends/dib0070.c:179 dib0070_set_bandwidth() warn: inconsistent indenting
drivers/media/dvb-frontends/dib0070.c:198 dib0070_captrim() warn: inconsistent indenting
drivers/media/dvb-frontends/dib0070.c:246 dib0070_set_ctrl_lo5() warn: inconsistent indenting
drivers/media/dvb-frontends/dib0070.c:260 dib0070_ctrl_agc_filter() warn: inconsistent indenting
drivers/media/dvb-frontends/dib0070.c:494 dib0070_tune_digital() warn: inconsistent indenting
drivers/media/dvb-frontends/dib0070.c:498 dib0070_tune_digital() warn: inconsistent indenting
drivers/media/dvb-frontends/dib0070.c:655 dib0070_reset() warn: inconsistent indenting
drivers/media/dvb-frontends/dib0070.c:711 dib0070_reset() warn: curly braces intended?
drivers/media/dvb-frontends/dib0070.c:713 dib0070_reset() warn: inconsistent indenting

My first idea were to leave it as-is or to just touch the above.

However, this won't be fixing anything. So, as painful as it
is, let's fix indentation globally on the driver, and then
address the inconsistencies.

Hopefully, this driver doesn't have much patches, so it likely
won't conflict to any other patch during this merge window.

Besides the big size of this patch, no functional changes
were done.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dib3000mc: fix bad indenting

drivers/media/dvb-frontends/dib3000mc.c:149 dib3000mc_setup_pwm_state() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cx231xx: fix bad indenting

drivers/media/usb/cx231xx/cx231xx-avcore.c:1598 cx231xx_set_DIF_bandpass() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-core.c:656 cx231xx_demod_reset() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-core.c:659 cx231xx_demod_reset() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-core.c:664 cx231xx_demod_reset() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-core.c:669 cx231xx_demod_reset() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-core.c:673 cx231xx_demod_reset() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-417.c:1164 cx231xx_initialize_codec() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>