Gabor Juhos [Sun, 23 Feb 2014 08:11:54 +0000 (08:11 +0000)]
ar71xx: define status LED for the RB91x boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39705
Gabor Juhos [Sun, 23 Feb 2014 08:11:53 +0000 (08:11 +0000)]
ar71xx: rb91x: register GPIO LEDs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39704
Gabor Juhos [Sun, 23 Feb 2014 08:11:52 +0000 (08:11 +0000)]
ar71xx: rb91x: add SPI device for the serial shift register
The RB91x boards are using a serial shift register
connected to the SPI bus to drive some of the LEDs.
Rework the board setup code to register a SPI device
for that. This makes it possible to use the 'spi-74x164'
driver to control the device.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39703
Gabor Juhos [Sun, 23 Feb 2014 08:11:50 +0000 (08:11 +0000)]
ar71xx/mikrotik: enable the 74x164 GPIO driver
That will be used to drive the 74HC595 serial-in/parallel-out
8-bits shift register which can be found on some RouterBOARDs.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39702
Gabor Juhos [Sun, 23 Feb 2014 08:11:49 +0000 (08:11 +0000)]
ar71xx: improve platform device support in the gpio-74x164 driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39701
Gabor Juhos [Sun, 23 Feb 2014 07:19:32 +0000 (07:19 +0000)]
ar71xx: rb91x-nand: rewrite to use GPIO API
Rewrite tha rb91x-nand driver to use GPIO API to
modify the NAND control lines.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39700
Gabor Juhos [Sat, 22 Feb 2014 18:05:32 +0000 (18:05 +0000)]
ar71xx: rb91x: register a gpio-latch platform device
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39699
Gabor Juhos [Sat, 22 Feb 2014 18:05:31 +0000 (18:05 +0000)]
ar71xx/mikrotik: enable the GPIO latch driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39698
Gabor Juhos [Sat, 22 Feb 2014 18:05:29 +0000 (18:05 +0000)]
ar71xx: add a generic GPIO latch driver
It will be used for the Mikrotik boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39697
Gabor Juhos [Sat, 22 Feb 2014 16:26:55 +0000 (16:26 +0000)]
ar71xx/mikrotik: enable small sector erase in the m25p80 driver
The serial flash devices used on the ROuterBOARDs are
supporting 4KiB erase blocks. Enable the small sector
erase option in the m25p80 driver to avoid superfluous
erase/write of adjacent blocks.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39696
Gabor Juhos [Sat, 22 Feb 2014 16:17:28 +0000 (16:17 +0000)]
ar71xx: spi-ath79: fix initial GPIO CS line setup
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39695
Gabor Juhos [Sat, 22 Feb 2014 16:17:27 +0000 (16:17 +0000)]
ar71xx: refresh unaligned access hacks patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39694
Nicolas Thill [Sat, 22 Feb 2014 15:51:11 +0000 (15:51 +0000)]
target/sunxi: add dependency on sunxi to kmod-wdt-sunxi
SVN-Revision: 39693
Felix Fietkau [Sat, 22 Feb 2014 14:42:48 +0000 (14:42 +0000)]
gianfar: Fix reported number of sent bytes to BQL
This is a backported patch for the gianfar ethernet driver
used in TPLink 4900 v1. It is supposed to fix the error which
show up in dmesg with:
NETDEV WATCHDOG: eth0 (fsl-gianfar): transmit queue xy timed out
Full upstream patch is at: http://patchwork.ozlabs.org/patch/271242
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
SVN-Revision: 39692
Felix Fietkau [Sat, 22 Feb 2014 13:57:09 +0000 (13:57 +0000)]
ath5k: mark the current survey channel as being used
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39691
Felix Fietkau [Sat, 22 Feb 2014 13:48:56 +0000 (13:48 +0000)]
ath9k: reduce unnecessary logspam (#14940)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39690
Felix Fietkau [Sat, 22 Feb 2014 13:43:48 +0000 (13:43 +0000)]
ath9k: fix issues with 5/10 mhz channel bandwidth (#14916)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39689
Felix Fietkau [Sat, 22 Feb 2014 13:01:11 +0000 (13:01 +0000)]
ath9k: fix issues that have been plaguing some powersave clients since the tx queueing rework (#14092)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39688
Felix Fietkau [Sat, 22 Feb 2014 13:01:07 +0000 (13:01 +0000)]
ath9k: show more reset causes in debugfs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39687
Felix Fietkau [Sat, 22 Feb 2014 13:01:04 +0000 (13:01 +0000)]
mac80211: merge some upstream fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39686
Felix Fietkau [Sat, 22 Feb 2014 13:01:00 +0000 (13:01 +0000)]
ath9k: enable u-apsd support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39685
Felix Fietkau [Sat, 22 Feb 2014 13:00:55 +0000 (13:00 +0000)]
ath9k: add a tx locking fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39684
Jonas Gorski [Sat, 22 Feb 2014 11:16:58 +0000 (11:16 +0000)]
b53: Make b53_switch_init static
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4869/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39683
Jonas Gorski [Sat, 22 Feb 2014 11:16:56 +0000 (11:16 +0000)]
b53: Add BCM53128 switch support
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4867/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39682
Jonas Gorski [Sat, 22 Feb 2014 11:16:52 +0000 (11:16 +0000)]
brcm63xx: fix RG100A/DB120 usb port number
Set usbh ports to 2 to fix #15007.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39681
Jonas Gorski [Sat, 22 Feb 2014 11:16:50 +0000 (11:16 +0000)]
brcm63xx: fix number of usb ports for HW556 variants
Don't only fix up the fallback board, but also all three variants.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39680
Jonas Gorski [Sat, 22 Feb 2014 11:16:48 +0000 (11:16 +0000)]
brcm63xx: add initial support for BCM963268BU_P300 reference board
Only netboot tested, so no images or now.
GbE ports are only working in FE mode, and leds do not work.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39679
Jonas Gorski [Sat, 22 Feb 2014 11:16:46 +0000 (11:16 +0000)]
brcm63xx: add VW6339GU support
Completely untested except for booting from network; wan port
only works in 10/HD, lan1 only in 100/FD.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39678
Jonas Gorski [Sat, 22 Feb 2014 11:16:44 +0000 (11:16 +0000)]
brcm63xx: fix number of switch ports for BCM63168/63268
BCM63168 has 6 ports (3 FE PHY, 1 GE PHY, two RGMII) and BCM63268
has two additional RGMII ports, making it 8.
Fix this by checking the chip variant and applying an appropriate
limit.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39677
Jonas Gorski [Sat, 22 Feb 2014 11:16:42 +0000 (11:16 +0000)]
brcm63xx: F@ST2504n board support (image, base-files)
Signed-off-by: Max Staudt <openwrt.max@enpas.org>
Patchwork: http://patchwork.openwrt.org/patch/4730/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39676
Jonas Gorski [Sat, 22 Feb 2014 11:16:40 +0000 (11:16 +0000)]
brcm63xx: F@ST2504n board support
Signed-off-by: Max Staudt <openwrt.max@enpas.org>
Patchwork: http://patchwork.openwrt.org/patch/4729/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39675
Jonas Gorski [Sat, 22 Feb 2014 11:16:38 +0000 (11:16 +0000)]
brcm63xx: add support for Asmax AR 1004g router
Support for Asmax AR 1004g router
Signed-off-by: Adrian Feliks <mexit@o2.pl>
Patchwork: http://patchwork.openwrt.org/patch/4464/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39674
Jonas Gorski [Sat, 22 Feb 2014 11:16:35 +0000 (11:16 +0000)]
brcm63xx: Add profile and build image for Sagemcom F@ST2704V2 ADSL router
This adds profile and build image for Sagemcom F@st2704, using b43
driver.
For WiFi to work properly BCMA fallback SPROM support patch must
be applied (http://git.io/z1Ki8A).
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4212/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39673
Jonas Gorski [Sat, 22 Feb 2014 11:16:33 +0000 (11:16 +0000)]
brcm63xx: Add userspace support for Sagemcom F@ST2704V2 ADSL router
This adds userspace support for Sagemcom F@st 2704 router.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4215/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39672
Jonas Gorski [Sat, 22 Feb 2014 11:16:30 +0000 (11:16 +0000)]
brcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL router
This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
router.
It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
modem equipped with 64 MiB RAM and 8 MiB flash.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4266/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39671
Hauke Mehrtens [Fri, 21 Feb 2014 22:57:39 +0000 (22:57 +0000)]
kernel: add missing depends on kmod-mii
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39670
Hauke Mehrtens [Fri, 21 Feb 2014 20:06:41 +0000 (20:06 +0000)]
kexec-tools: disable lzma support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39652
Steven Barth [Fri, 21 Feb 2014 18:02:25 +0000 (18:02 +0000)]
odhcpd: fix wrong address pool being advertised
SVN-Revision: 39651
Imre Kaloz [Fri, 21 Feb 2014 10:39:14 +0000 (10:39 +0000)]
the root password should be empty for real, like before
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39650
Jo-Philipp Wich [Fri, 21 Feb 2014 00:22:23 +0000 (00:22 +0000)]
firewall: fix validation constraints
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 39649
Jo-Philipp Wich [Fri, 21 Feb 2014 00:17:04 +0000 (00:17 +0000)]
netifd: fix validation constraints
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 39648
Jo-Philipp Wich [Thu, 20 Feb 2014 23:20:10 +0000 (23:20 +0000)]
firewall: fix several ipset integration issues (#15016)
- Do not consider bitmap storage for IPv6 family sets
- Move ipset family parameter before any additional option
- Only emit family parameter for hash sets
- Do not allow IPv6 iprange for IPv4 sets and vice versa
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 39647
Steven Barth [Thu, 20 Feb 2014 21:36:15 +0000 (21:36 +0000)]
6in4: add support for he.net updatekey
SVN-Revision: 39646
Luka Perkov [Thu, 20 Feb 2014 17:26:10 +0000 (17:26 +0000)]
imx6: update Ventana dts
Update the Ventana device-tree to match upstream:
- Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx
- align pinctrl with upstream
- consolidate multiple patches into one
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39644
Luka Perkov [Thu, 20 Feb 2014 17:26:08 +0000 (17:26 +0000)]
imx6: enable IMX6 watchdog
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39643
Gabor Juhos [Thu, 20 Feb 2014 17:07:56 +0000 (17:07 +0000)]
ar71xx: rb91x: fix pll_1000 value for eth0 to avoid packet loss
When the RB91x device uses a GbE link the connection
suffers from packet loss:
root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 20 -q
PING 192.168.1.254 (192.168.1.254): 65507 data bytes
--- 192.168.1.254 ping statistics ---
20 packets transmitted, 9 packets received, 55% packet loss
round-trip min/avg/max = 4.570/4.815/4.999 ms
Using a different PLL value fixes the issue.
root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 100 -q
PING 192.168.1.254 (192.168.1.254): 65507 data bytes
--- 192.168.1.254 ping statistics ---
100 packets transmitted, 100 packets received, 0% packet loss
round-trip min/avg/max = 4.449/5.413/13.870 ms
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39642
Gabor Juhos [Thu, 20 Feb 2014 17:07:51 +0000 (17:07 +0000)]
ar71xx: Add support for MikroTik RB951Ui-2HnD
I noticed that the patch at http://patchwork.openwrt.org/patch/4017/
for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been
abandoned because it wasn't generated and sent to the mailing list
correctly and doesn't apply as a result. I have cleaned up this patch.
When testing this on real hardware, I also noticed that wireless didn't
work, so this patch fixes that as well.
This patch applies cleanly to SVN 39392.
Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
Patchwork: http://patchwork.openwrt.org/patch/4773/
[juhosg:
- drop the 'rb951ui_wlan_init' function and rework the code to
use the recently introduced rb95x_wlan_init function instead,
- fix GPIO number of the port5 LED,
- rename LEDs according to the standard LED naming conventions,
and use 'rb' prefix in the names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39641
Gabor Juhos [Thu, 20 Feb 2014 17:07:44 +0000 (17:07 +0000)]
kernel/3.10: improve fq_codel hashing for 6in4 6to4 801.ad and IPIP cases
This is a backport of code to improve the quality of fq_codel
hashing for 3.10 for some encapsulated protocols.
Not needed in 3.11 and later.
Patch-by: Dave Taht <dave.taht@bufferbloat.net>
Patchwork: http://patchwork.openwrt.org/patch/4902/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39640
Luka Perkov [Thu, 20 Feb 2014 14:01:28 +0000 (14:01 +0000)]
imx6: drop upstream rejected patch
http://article.gmane.org/gmane.linux.drivers.i2c/17891
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39639
Felix Fietkau [Wed, 19 Feb 2014 19:20:10 +0000 (19:20 +0000)]
gcc: prevent the use of LDRD/STRD on ARMv5TE
These instructions are for 64-bit load/store. On ARMv5TE, the CPU
requires addresses to be aligned to 64-bit. When misaligned, behavior is
undefined (effectively either loads the same word twice on LDRD, or
corrupts surrounding memory on STRD).
On ARMv6 and newer, unaligned access is safe.
Removing these instructions for ARMv5TE is necessary, because GCC
ignores alignment information in pointers and does unsafe optimizations
that have shown up as bugs in various places.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39638
Gabor Juhos [Wed, 19 Feb 2014 12:15:35 +0000 (12:15 +0000)]
ar71xx: add profile and build image for TP-Link TL-WDR4900 v2.0 board
Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4850/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39637
Gabor Juhos [Wed, 19 Feb 2014 12:15:34 +0000 (12:15 +0000)]
ar71xx: add user-space support for TP-Link TL-WDR4900 v2.0 board
Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4849/
[juhosg:
- use the Archer C7 specific LED setup instead of adding
identical code]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39636
Gabor Juhos [Wed, 19 Feb 2014 12:15:32 +0000 (12:15 +0000)]
ar71xx: add kernel support for the TP-Link TL-WDR4900 v2.0 board
Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4848/
[juhosg:
- rename and refresh kernel patch,
- merge the board setup code into mach-archer-c7.c and drop
mach-tl-wdr49000-v2.c]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39635
Nicolas Thill [Wed, 19 Feb 2014 00:17:19 +0000 (00:17 +0000)]
sunxi: move a lost CONFIG_CHARGER symbol to generic
SVN-Revision: 39634
Nicolas Thill [Tue, 18 Feb 2014 22:29:56 +0000 (22:29 +0000)]
target/sunxi: make REGMAP built-in (used by REGULATOR)
SVN-Revision: 39633
Nicolas Thill [Tue, 18 Feb 2014 22:16:04 +0000 (22:16 +0000)]
target/uml: update README
invoking uml is now simplier, not need to setup console & serial
SVN-Revision: 39632
Nicolas Thill [Tue, 18 Feb 2014 22:15:58 +0000 (22:15 +0000)]
toolchain: update build steps doc
SVN-Revision: 39631
Nicolas Thill [Tue, 18 Feb 2014 22:15:52 +0000 (22:15 +0000)]
mac80211: disable libertas-sd on uml target
SVN-Revision: 39630
Nicolas Thill [Tue, 18 Feb 2014 22:11:24 +0000 (22:11 +0000)]
uboot-envtools: pass target cflags
SVN-Revision: 39629
Steven Barth [Tue, 18 Feb 2014 18:30:47 +0000 (18:30 +0000)]
odhcp6c: readd userclass and vendorclass
SVN-Revision: 39628
Gabor Juhos [Tue, 18 Feb 2014 17:34:18 +0000 (17:34 +0000)]
kernel: refresh configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39627
Gabor Juhos [Tue, 18 Feb 2014 17:34:17 +0000 (17:34 +0000)]
ar71xx: fix unaligned access hacks for tcp timestamps
This missing bit of the hack saves hugely on instruction traps
on tcp connections to ar71xx based routers.
Patch-by: Dave Taht <dave.taht@bufferbloat.net>
Patchwork: http://patchwork.openwrt.org/patch/4905/
[juhosg: adjust subject, refresh kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39626
Gabor Juhos [Tue, 18 Feb 2014 17:34:16 +0000 (17:34 +0000)]
ar71xx: WNR2200: fix mounting root fs problem
Solves ticket #14356 <https://dev.openwrt.org/ticket/14356>
Without this patch, UART output will show only 4 partitions:
[ 0.740000] 4 cmdlinepart partitions found on MTD device spi0.0
[ 0.750000] Creating 4 MTD partitions on "spi0.0":
[ 0.750000] 0x000000000000-0x000000050000 : "u-boot"
[ 0.760000] 0x000000050000-0x000000070000 : "u-boot-env"
[ 0.770000] 0x000000070000-0x0000007f0000 : "firmware"
[ 0.790000] 0x0000007f0000-0x000000800000 : "art"
and then linux complains :VFS: Cannot open root device "(null)"
With this patch, UART out will show 7 partitions:
[ 0.740000] 4 cmdlinepart partitions found on MTD device spi0.0
[ 0.750000] Creating 4 MTD partitions on "spi0.0":
[ 0.750000] 0x000000000000-0x000000040000 : "u-boot"
[ 0.760000] 0x000000040000-0x000000050000 : "u-boot-env"
[ 0.770000] 0x000000050000-0x0000007f0000 : "firmware"
[ 0.780000] 2 netgear-fw partitions found on MTD device firmware
[ 0.780000] 0x000000050000-0x00000014b440 : "kernel"
[ 0.790000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.800000] 0x00000014b440-0x0000007f0000 : "rootfs"
[ 0.810000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.820000] mtd: device 4 (rootfs) set to be root filesystem
[ 0.830000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.830000] 0x000000340000-0x0000007f0000 : "rootfs_data"
[ 0.840000] 0x0000007f0000-0x000000800000 : "art"
This patch is tested against r39502 of trunk.
Signed-off-by: Jonathan Chang <changcs@santos.ee.ntu.edu.tw>
Patchwork: http://patchwork.openwrt.org/patch/4870/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39625
John Crispin [Tue, 18 Feb 2014 13:34:16 +0000 (13:34 +0000)]
odhcp6c: add validation rules to proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39624
John Crispin [Tue, 18 Feb 2014 13:34:12 +0000 (13:34 +0000)]
relayd: add uci validation
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39623
John Crispin [Tue, 18 Feb 2014 13:34:08 +0000 (13:34 +0000)]
mac80211: add validation rules
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39622
John Crispin [Tue, 18 Feb 2014 13:34:04 +0000 (13:34 +0000)]
netifd: add validation support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39621
John Crispin [Tue, 18 Feb 2014 13:33:59 +0000 (13:33 +0000)]
hostapd: add validation rules to wireless handler
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39620
John Crispin [Tue, 18 Feb 2014 13:33:56 +0000 (13:33 +0000)]
ppp: add validation rules to proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39619
John Crispin [Tue, 18 Feb 2014 13:33:52 +0000 (13:33 +0000)]
comgt: add validation rules to proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39618
John Crispin [Tue, 18 Feb 2014 13:33:47 +0000 (13:33 +0000)]
firewall3: update init.d script to make use of procd
add validation data
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39617
John Crispin [Tue, 18 Feb 2014 13:33:43 +0000 (13:33 +0000)]
ubox: logd did not register its config.reload trigger properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39616
John Crispin [Tue, 18 Feb 2014 13:33:40 +0000 (13:33 +0000)]
base-files: split /etc/init.d/boot into 2 files
this allows us to bind a procd trigger to system.@system[-1]
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39615
John Crispin [Tue, 18 Feb 2014 13:33:36 +0000 (13:33 +0000)]
netifd: update to latest git head
this adds support for proto and wireless handler adding uci validation rules
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39614
John Crispin [Tue, 18 Feb 2014 13:33:32 +0000 (13:33 +0000)]
procd: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39613
John Crispin [Tue, 18 Feb 2014 13:33:29 +0000 (13:33 +0000)]
procd: the helper script did not export all functions properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39612
John Crispin [Tue, 18 Feb 2014 13:33:25 +0000 (13:33 +0000)]
ralink: add support for na930
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39611
John Crispin [Tue, 18 Feb 2014 13:33:20 +0000 (13:33 +0000)]
ralink: add gpio_uartf mux group
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39610
John Crispin [Tue, 18 Feb 2014 13:33:16 +0000 (13:33 +0000)]
ralink: fix the gpio mode mapping
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39609
John Crispin [Tue, 18 Feb 2014 13:33:13 +0000 (13:33 +0000)]
authsae: update to latest version
Signed-off-by: Stefan May <smay@4finger.net>
SVN-Revision: 39608
John Crispin [Tue, 18 Feb 2014 13:33:08 +0000 (13:33 +0000)]
openssl: fix up PKG_DEPENDS. there are 2 missing CONFIG_ prefixe
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39607
Felix Fietkau [Tue, 18 Feb 2014 12:27:11 +0000 (12:27 +0000)]
uci: update to latest version, adds preparation for validation support and blobmsg int64 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39606
Steven Barth [Mon, 17 Feb 2014 20:31:21 +0000 (20:31 +0000)]
odhcp6c: send reconfigure-accept again to be compliant
SVN-Revision: 39605
Steven Barth [Mon, 17 Feb 2014 20:30:29 +0000 (20:30 +0000)]
odhcpd: Fix RA interval + add support for prefixes > 64 and < 97
SVN-Revision: 39604
Zoltan Herpai [Mon, 17 Feb 2014 11:49:34 +0000 (11:49 +0000)]
3.13: revert r39601 as the symbol is already there
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39602
Zoltan Herpai [Mon, 17 Feb 2014 10:57:11 +0000 (10:57 +0000)]
3.13: add missing NF_TABLES symbol - until someone packages it
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39601
Zoltan Herpai [Mon, 17 Feb 2014 10:20:53 +0000 (10:20 +0000)]
3.13: add missing symbol
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39600
Luka Perkov [Sun, 16 Feb 2014 21:51:10 +0000 (21:51 +0000)]
cmake: upgrade to 2.8.12.2
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39598
Steven Barth [Sun, 16 Feb 2014 11:20:22 +0000 (11:20 +0000)]
netifd: work around dangling prefix kernel-routes (fixes #14963)
SVN-Revision: 39597
Luka Perkov [Sun, 16 Feb 2014 00:14:29 +0000 (00:14 +0000)]
kirkwood: dockstar: remove sata from packages
The dockstar doesn't have any sata ports.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 39596
Luka Perkov [Sun, 16 Feb 2014 00:14:27 +0000 (00:14 +0000)]
kirkwood: add support for Seagate GoFlexNet
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 39595
Luka Perkov [Sun, 16 Feb 2014 00:14:26 +0000 (00:14 +0000)]
uboot-kirkwood: add support for Seagate GoFlexNet
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39594
Luka Perkov [Sat, 15 Feb 2014 23:53:10 +0000 (23:53 +0000)]
kirkwood: update support for dockstar
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:
nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-dockstar-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset
Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Alexander Couzens <lynxis@fe80.eu>
CC: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39593
Luka Perkov [Sat, 15 Feb 2014 23:53:09 +0000 (23:53 +0000)]
kirkwood: update support for ib62x0
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:
nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-ib62x0-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset
Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39592
Luka Perkov [Sat, 15 Feb 2014 23:53:08 +0000 (23:53 +0000)]
kirkwood: update support for iconnect
Previous patch was pushed due to false user report. While at it fix alphabetic
ordering.
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:
nand erase 0x200000 0x1fe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-iconnect-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset
Signed-off-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39591
Luka Perkov [Sat, 15 Feb 2014 23:53:07 +0000 (23:53 +0000)]
uboot-kirkwood: update to 2013.10
Tested on:
* Cloud Engines Pogoplug E02
* RaidSonic ICY BOX IB-NAS62x0
* Iomega Iconnect
Some users are avoiding to replace their bootloader, because of that add
support for second stage u-boot image. Having ubifs capable bootloader is
required in order to boot current OpenWrt trunk.
Sample ib62x0 commands for running second stage bootloader:
tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img
bootm 0x800000
Sample ib62x0 commands for flashing second stage bootloader:
tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img
nand erase 0x100000 0x100000 ; nand write 0x800000 0x100000 0x${filesize}
nand read 0x800000 0x100000 0x100000 ; bootm 0x800000
While at it include parallel build support, use alphabetic order of the boards
and introduce common OpenWrt configuration.
Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by (on ib62x0): Luka Perkov <luka@openwrt.org>
Tested-by (on dockstar): Alexander Couzens <lynxis@fe80.eu>
Tested-by (on iconnect): Wojciech Dubowik <wojciech.dubowik@neratec.com>
CC: Felix Kaechele <heffer@fedoraproject.org>
CC: Wojciech Dubowik <wojciech.dubowik@neratec.com>
CC: Alexander Couzens <lynxis@fe80.eu>
CC: Daniel Engberg <daniel.engberg@pyret.net>
CC: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39590
Luka Perkov [Sat, 15 Feb 2014 22:54:35 +0000 (22:54 +0000)]
kernel: rtl8306: update reset function
Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 39589
Luka Perkov [Sat, 15 Feb 2014 22:54:34 +0000 (22:54 +0000)]
lantiq: fix typo in pinctl driver
Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 39588
Luka Perkov [Sat, 15 Feb 2014 22:54:32 +0000 (22:54 +0000)]
lantiq: fix PCI problems on ARV4510PW
Some ARV4510PW units seem to have unstable PCI due to missing pull-up
resistors. This patch makes sure that the GPIO lines are driven properly.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 39587
Steven Barth [Fri, 14 Feb 2014 21:21:44 +0000 (21:21 +0000)]
netifd: fix source-routing breaking 6in4 + others
6in4 historically allowed an ip6addr without a mask however the newly
introduced source-routing segfaulted in this scenario (#14958 + #14858).
Fixes include: "Fix ubus route src mask printing" and
"Disable netlink auto ack" (thanks to Hans Dedecker)
SVN-Revision: 39586
projects / openwrt / staging / blocktrron.git / log