git.openwrt.org Git - openwrt/staging/blogic.git/log

drm/i915/mst: Use .compute_config_late() to compute master transcoder

Use the recently introduced encoder .compute_config_late() hook to
do the MST master transcoder assignment. Avoids having to do it
in a funny way before we know the CPU transcoder of each pipe.

And now we can also properly use hw.active instead of uapi.active
since it too has been calculated earlier for everyone.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Differentiate between aliasing-ppgtt and ggtt pinning

Userptr causes lockdep to complain when we are using the aliasing-ppgtt
(and ggtt, but for that it is rightfully so to complain about) in that
when we revoke the userptr we take a mutex which we also use to revoke
the mmaps. However, we only revoke mmaps for GGTT bindings and we never
allow userptr to create a GGTT binding so the warning should be false
and is simply caused by our conflation of the aliasing-ppgtt with the
ggtt. So lets try treating the binding into the aliasing-ppgtt as a
separate lockclass from the ggtt. The downside is that we are
deliberately suppressing lockdep;s ability to warn us of cycles.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/478
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326142727.31962-1-chris@chris-wilson.co.uk

drm: Constify adjusted_mode a bit

The DP link computation functions shouldn't modify the
adjusted_mode so make it const.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319163844.22783-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Get rid of silly void* from MST code

Not sure why this thing is trying to avoid declaring the proper
type for these pointers. But since these are used only once let's
just get rid of the local variable entirely.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310202752.28454-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: use forced codec wake on all gen9+ platforms

Commit 632f3ab95fe2 ("drm/i915/audio: add codec wakeup override
enabled/disable callback"), added logic to toggle Codec Wake on gen9.
This is used by audio driver when it resets the HDA controller.

It seems explicit toggling of the wakeline can help to fix problems
with probe failing on some gen12 platforms. And based on specs, there
is no reason why this programming sequence should not be applied to all
gen9+ platforms. No side-effects are seen on gen10/11. So apply
the wake-logic to all gen9+ platforms.

Link: https://github.com/thesofproject/linux/issues/1847
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324153212.6303-1-kai.vehmanen@linux.intel.com

drm/i915/perf: add new open param to configure polling of OA buffer

This new parameter let's the application choose how often the OA
buffer should be checked on the CPU side for data availability. Longer
polling period tend to reduce CPU overhead if the application does not
care about somewhat real time data collection.

v2: Allow disabling polling completely with 0 value (Lionel)
v3: Version the new parameter (Joonas)
v4: Rebase (Umesh)
v5: Make poll delay value of 0 invalid (Umesh)
v6:
- Describe poll_oa_period (Ashutosh)
- Fix comment for new poll parameter (Lionel)
- Drop open_flags in read_properties_unlocked (Lionel)
- Rename uapi parameter (Ashutosh)
v7: Reword the comment in uapi (Ashutosh)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324185457.14635-4-umesh.nerlige.ramappa@intel.com

drm/i915/perf: move pollin setup to non hw specific code

This isn't really gen specific stuff, so just move it to the common
code.

v2: Rebase (Umesh)
v3: Remove comment, pollin is a per stream state already (Ashutosh)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324185457.14635-3-umesh.nerlige.ramappa@intel.com

drm/i915/perf: rework aging tail workaround

We're about to introduce an options to open the perf stream, giving
the user ability to configure how often it wants the kernel to poll
the OA registers for available data.

Right now the workaround against the OA tail pointer race condition
requires at least twice the internal kernel polling timer to make any
data available.

This changes introduce checks on the OA data written into the circular
buffer to make as much data as possible available on the first
iteration of the polling timer.

v2: Use OA_TAKEN macro without the gtt_offset (Lionel)
v3: (Umesh)
- Rebase
- Change report to report32 from below review
https://patchwork.freedesktop.org/patch/330704/?series=66697&rev=1
v4: (Ashutosh, Lionel)
- Fix checkpatch errors
- Fix aging_timestamp initialization
- Check for only one valid landed report
- Fix check for unlanded report
v5: (Ashutosh)
- Fix bug in accurately determining landed report.
- Optimize the check for landed reports by going as far as the
previously determined aged tail.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324185457.14635-2-umesh.nerlige.ramappa@intel.com

drm/i915: Cast remain to unsigned long in eb_relocate_vma

A recent commit in clang added -Wtautological-compare to -Wall, which is
enabled for i915 after -Wtautological-compare is disabled for the rest
of the kernel so we see the following warning on x86_64:

../drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c:1433:22: warning:
result of comparison of constant 576460752303423487 with expression of
type 'unsigned int' is always false
[-Wtautological-constant-out-of-range-compare]
         if (unlikely(remain > N_RELOC(ULONG_MAX)))
            ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
../include/linux/compiler.h:78:42: note: expanded from macro 'unlikely'
# define unlikely(x)    __builtin_expect(!!(x), 0)
                                            ^
1 warning generated.

It is not wrong in the case where ULONG_MAX > UINT_MAX but it does not
account for the case where this file is built for 32-bit x86, where
ULONG_MAX == UINT_MAX and this check is still relevant.

Cast remain to unsigned long, which keeps the generated code the same
(verified with clang-11 on x86_64 and GCC 9.2.0 on x86 and x86_64) and
the warning is silenced so we can catch more potential issues in the
future.

Closes: https://github.com/ClangBuiltLinux/linux/issues/778
Suggested-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200214054706.33870-1-natechancellor@gmail.com

drm/i915/uc: do not free err log on uc_fini

We need to keep the GuC error logs around to debug the load failure,
so we can't clean them in the error unwind, which includes uc_fini().
Moving the cleanup to driver remove ensures that the logs stick around
long enough for us to dump them.

v2: reword commit msg (John)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326181121.16869-7-daniele.ceraolospurio@intel.com

drm/i915/uc: Move uC debugfs to its own folder under GT

uC is a component of the GT, so it makes sense for the uC debugfs files
to be in the GT folder. A subfolder has been used to keep the same
structure we have for the code.

v2: use intel_* prefix (Jani), rebase on new gt_debugfs_register_files,
fix permissions for writable debugfs files.

v3: Rename files (Michal), remove blank line (Jani), fix sparse warns.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com> #v2
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326181121.16869-6-daniele.ceraolospurio@intel.com

drm/i915/debugfs: move uC printers and update debugfs file names

Move the printers to the respective files for clarity. The
guc_load_status debugfs has been squashed in the guc_info one, has
having separate ones wasn't very useful. The HuC debugfs has been
renamed huc_info to match.

v2: keep printing HUC_STATUS2 (Tony), avoid const->non-const
container_of (Jani)

Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326181121.16869-5-daniele.ceraolospurio@intel.com

drm/i915/huc: make "support huc" reflect HW capabilities

We currently initialize HuC support based on GuC being enabled in
modparam; this means that huc_is_supported() can return false on HW that
does have a HuC when enable_guc=0. The rationale for this behavior is
that HuC requires GuC for authentication and therefore is not supported
by itself. However, we do not allow defining HuC fw wthout GuC fw and
selecting HuC in modparam implicitly selects GuC as well, so we can't
actually hit a scenario where HuC is selected alone. Therefore, we can
flip the support check to reflect the HW capabilities and fw
availability, which is more intuitive and will make it cleaner to log
HuC the difference between not supported in HW and not selected.

Removing the difference between GuC and HuC also allows us to simplify
the init_early, since we don't need to differentiate the support based
on the type of uC.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326181121.16869-4-daniele.ceraolospurio@intel.com

drm/i915/guc: drop stage_pool debugfs

The pool will be private to GuC in the new submission scheme, so we
won't be able to print it and we can just drop the current legacy code.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326181121.16869-3-daniele.ceraolospurio@intel.com

drm/i915/gt: allow setting generic data pointer

When registering debugfs files the intel gt debugfs library
forces a 'struct *gt' private data on the caller.

To be open to different usages make the new
"intel_gt_debugfs_register_files()"[*] function more generic by
converting the 'struct *gt' pointer to a 'void *' type.

I take the chance to rename the functions by using "intel_gt_" as
prefix instead of "debugfs_", so that "debugfs_gt_register_files()"
becomes "intel_gt_debugfs_register_files()".

Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326181121.16869-2-daniele.ceraolospurio@intel.com

drm/i915/display: Fix mode private_flags comparison at atomic_check

This patch fixes the private_flags of mode to be checked and
compared against uapi.mode and not from hw.mode. This helps
properly trigger modeset at boot if desired by driver.

It helps resolve audio_codec initialization issues if display
is connected at boot. Initial discussion on this issue has happened
on below thread:
https://patchwork.freedesktop.org/series/74828/

v2: No functional change. Fixed the Closes tag and added
Maarten's RB.

v3: Added Fixes tag.

Cc: Ville Syrjä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Souza, Jose <jose.souza@intel.com>
Fixes: 58d124ea2739 ("drm/i915: Complete crtc hw/uapi split, v6.")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1363
Suggested-by: Ville Syrjä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: SweeAun Khor <swee.aun.khor@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326125111.11081-1-uma.shankar@intel.com

drm/i915/display: Return early after MISSING_CASE for write_dp_sdp

Avoid using the uninitialised len along the impossible error path to
shut the compiler up:

drivers/gpu/drm/i915/display/intel_dp.c:4928 intel_write_dp_sdp() error: uninitialized symbol 'len'.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325140754.12636-1-chris@chris-wilson.co.uk

drm/i915/display: Remove useless but deadly local

Beware dereferencing the NULL pointer prior to checking for its
existence.

<1>[    3.324694] BUG: kernel NULL pointer dereference, address: 0000000000000000
<1>[    3.324696] #PF: supervisor read access in kernel mode
<4>[    3.324704] hardirqs last  enabled at (751): [<ffffffff812a4f77>] d_lookup+0x57/0xa0
<1>[    3.324709] #PF: error_code(0x0000) - not-present page
<4>[    3.324716] hardirqs last disabled at (752): [<ffffffff8125a1b9>] __slab_alloc.isra.89.constprop.94+0x19/0x70
<4>[    3.324720] softirqs last  enabled at (402): [<ffffffff81e00385>] __do_softirq+0x385/0x47f
<6>[    3.324725] PGD 0 P4D 0
<4>[    3.324733] softirqs last disabled at (395): [<ffffffff810bab6a>] irq_exit+0xba/0xc0
<4>[    3.324762] Oops: 0000 [#1] PREEMPT SMP PTI
<4>[    3.324768] CPU: 0 PID: 380 Comm: systemd-udevd Not tainted 5.6.0-rc7-CI-CI_DRM_8189+ #1
<4>[    3.324776] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016
<4>[    3.324840] RIP: 0010:intel_read_infoframe+0x3a/0x170 [i915]
<4>[    3.324848] Code: 65 48 8b 04 25 28 00 00 00 48 89 44 24 20 31 c0 83 f9 0a 77 12 ba 01 00 00 00 48 d3 e2 f7 c2 c0 05 00 00 48 0f 45 c7 83 fb 03 <4c> 8b 20 0f 84 f2 00 00 00 83 fb 0a 0f 84 f3 00 00 00 83 fb 07 0f
<4>[    3.324865] RSP: 0018:ffffc900005438b0 EFLAGS: 00010212
<4>[    3.324871] RAX: 0000000000000000 RBX: 0000000000000082 RCX: 0000000000000001
<4>[    3.324879] RDX: 0000000000000002 RSI: ffff8883f8309000 RDI: ffff8883f80cbe00
<4>[    3.324887] RBP: ffff8883f8309b34 R08: 000000000000000e R09: 0000000000000001
<4>[    3.324894] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883f7ac0000
<4>[    3.324901] R13: ffff8883f7ac0000 R14: ffff8883f7ac0d90 R15: ffff8883f844d000
<4>[    3.324908] FS:  00007ffa4a839680(0000) GS:ffff888410000000(0000) knlGS:0000000000000000
<4>[    3.324917] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[    3.324923] CR2: 0000000000000000 CR3: 0000000401aa4002 CR4: 00000000001606f0
<4>[    3.324930] Call Trace:
<4>[    3.324980]  ? gen6_read32+0x272/0x300 [i915]
<4>[    3.325044]  intel_ddi_get_config+0x238/0x610 [i915]
<4>[    3.325108]  hsw_crt_get_config+0x12/0x40 [i915]
<4>[    3.325173]  intel_modeset_setup_hw_state+0x3b3/0x1660 [i915]
<4>[    3.325182]  ? ww_mutex_lock+0x39/0x70
<4>[    3.325190]  ? drm_modeset_lock+0xad/0x120
<4>[    3.325254]  intel_modeset_init+0x582/0x1c50 [i915]

Fixes: 419190429cd1 ("drm/i915/hdmi: use struct drm_device based logging")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326082838.16357-1-chris@chris-wilson.co.uk

drm/i915: Drop final few uses of drm_i915_private.engine

We've migrated all the heavy users over to the intel_gt, and can finally
drop the last few users and with that the mirror in dev_priv->engine[].

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325234803.6175-1-chris@chris-wilson.co.uk

drm/i915/wopcm: convert to drm device based logging

Prefer drm_dbg() over DRM_DEV_DEBUG_DRIVER() and drm_err() over
dev_err().

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/017d9bdc171481da13ba9492492625fc6878844d.1584714939.git.jani.nikula@intel.com

drm/i915/psr: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cac03aba0a363c8f704035f1f771c73385235a35.1584714939.git.jani.nikula@intel.com

drm/i915/display: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ffdbda0a0fe18354867b3f8c7a83f59f0963711d.1584714939.git.jani.nikula@intel.com

drm/i915/display: clean up intel_PLL_is_valid()

Drop useless macro hiding the return. Fix superfluous whitespace. Rename
function to all lowercase.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/307c9f87cb2fbd5d2d67ec6adcde7ab669c2b93f.1584714939.git.jani.nikula@intel.com

drm/i915/tv: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e08dbd1933e1dbbd8e9f1954f5b0a9db946c4e7d.1584714939.git.jani.nikula@intel.com

drm/i915/connector: use MISSING_CASE instead of logging

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bb70a05a2c20307ab67b89c4682f5afc5953fcaf.1584714939.git.jani.nikula@intel.com

drm/i915/dsi: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/436b6dde60dcba235085c8bb216c841267519fa6.1584714939.git.jani.nikula@intel.com

drm/i915/hdmi: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fbc5396e6a512195b38c24b113aeebe23755c716.1584714939.git.jani.nikula@intel.com

drm/i915/dsi: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3bc29cddbba9dea57f8f843be2a6b5e1f7358b5c.1584714939.git.jani.nikula@intel.com

drm/i915/dp_mst: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5ee3b8040658b5b4ef0b8b1a546fa04f554cdf6a.1584714939.git.jani.nikula@intel.com

drm/i915/dp_aux_backlight: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/733d3032e61cb4892a516d5be5da5ec73bdb9fa1.1584714939.git.jani.nikula@intel.com

drm/i915/display_power: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/25e56d1b7df3b1e91024eb969fb839fdcbdcb35e.1584714939.git.jani.nikula@intel.com

drm/i915/ddi: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e09bb6e97b2fbc44303acce0523dc35e3e74a456.1584714939.git.jani.nikula@intel.com

drm/i915/gt: Stage the transfer of the virtual breadcrumb

We move the virtual breadcrumb from one physical engine to the next, if
the next virtual request is scheduled on a new physical engine. Since
the virtual context can only be in one signal queue, we need it to track
the current physical engine for the new breadcrumbs. However, to move
the list we need both breadcrumb locks -- and since we cannot take both
at the same time (unless we are careful and always ensure consistent
ordering) stage the movement of the signaler via the current virtual
request.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1510
Fixes: 6d06779e8672 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325130059.30600-1-chris@chris-wilson.co.uk

drm/i915: Immediately execute the fenced work

If the caller allows and we do not have to wait for any signals,
immediately execute the work within the caller's process. By doing so we
avoid the overhead of scheduling a new task, and the latency in
executing it, at the cost of pulling that work back into the immediate
context. (Sometimes we still prefer to offload the task to another cpu,
especially if we plan on executing many such tasks in parallel for this
client.)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325120227.8044-2-chris@chris-wilson.co.uk

drm/i915/execlists: Pull tasklet interrupt-bh local to direct submission

We dropped calling process_csb prior to handling direct submission in
order to avoid the nesting of spinlocks and lift process_csb() and the
majority of the tasklet out of irq-off. However, we do want to avoid
ksoftirqd latency in the fast path, so try and pull the interrupt-bh
local to direct submission if we can acquire the tasklet's lock.

v2: Document the read of pending[0] from outside the tasklet with
READ_ONCE.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325120227.8044-1-chris@chris-wilson.co.uk

drm/i915/selftests: Measure the energy consumed while in RC6

Measure and compare the energy consumed, as reported by the rapl MSR,
by the GPU while in RC0 and RC6 states. Throw an error if RC6 does not
at least halve the energy consumption of RC0, as this more than likely
means we failed to enter RC0 correctly.

If we can't measure the energy draw with the MSR, then it will report 0
for both measurements. Since the measurement works on all gen6+, this seems
worth flagging as an error.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325101502.12591-1-chris@chris-wilson.co.uk

drm/i915/execlists: Drop setting sibling priority hint on virtual engines

We set the priority hint on execlists to avoid executing the tasklet for
when we know that there will be no change in execution order. However,
as we set it from the virtual engine for all siblings, but only one
physical engine may respond, we leave the hint set on the others
stopping direct submission that could take place.

If we do not set the hint, we may attempt direct submission even if we
don't expect to submit. If we set the hint, we may not do any submission
until the tasklet is run (and sometimes we may park the engine before
that has had a chance). Ergo there's only a minor ill-effect on mixed
virtual/physical engine workloads where we may try and fail to do direct
submission more often than required. (Pure virtual / engine workloads
will have redundant tasklet execution suppressed as normal.)

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1522
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325101358.12231-1-chris@chris-wilson.co.uk

drm/i915/display/fbc: Make fences a nice-to-have for GEN9+

dGFX has local memory so it does not have aperture or support
CPU fences but even for iGFX it have a small number of fences.

As replacement for fences to track frontbuffer modifications by CPU
we have a software tracking that is already in used by FBC and PSR.
PSR don't support fences so it shows that this tracking is reliable.

So lets make fences a nice-to-have to activate FBC for GEN9+, this
will allow us to enable FBC for dGFXs and iGFXs even when there is no
available fence.

We do not set fences to rotated planes but FBC only have restrictions
against 16bpp, so adding it here.

Also adding a new check for the tiling format, fences are only set
to X and Y tiled planes but again FBC don't have any restrictions
against tiling so adding linear as supported as well, other formats
should be added after tested but IGT only supports drawing in thse
3 formats.

intel_fbc_hw_tracking_covers_screen() maybe can also have the same
treatment as fences but BSpec is not clear if the size limitation is
for hardware tracking or general use of FBC and I don't have a 5K
display to test it, so keeping as is for safety.

v2:
- Added tiling and pixel format rotation checks
- Changed the GEN version not requiring fences to 11 from 9, DDX
needs some changes but it don't have support for GEN11+

v3:
- Changed back to GEN9+
- Moved GEN test to inside of tiling_is_valid()

v4:
- moved rotation check to its own functions

v5:
- renamed rotations_is_valid to rotation_is_valid
- moved pre-g4x rotation check to rotation_is_valid()

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319211535.114625-1-jose.souza@intel.com

drm/i915/gt: Select the deepest available parking mode for rc6

On Ivybridge, we can go lower than rc6 to rc6p. And this is required for
Ivybridge to hit the same minimum power consumption as rc6 on other
platforms, so make it so.

v2: Update selftest to include all rc6 residency counters

Note that Andi did mention that we should be converting the magic
numbers into opaque magic macros, so if they ever get reused (unlikely
given only Ivybridge used the extra modes) we'll need to pay back the
technical debt.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1518
Fixes: 730eaeb52426 ("drm/i915/gt: Manual rc6 entry upon parking")
Testcase: igt/i915_pm_rc6_residency/rc6-idle
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324134232.8773-1-chris@chris-wilson.co.uk

drm/i915/dsi: Use private flags to indicate TE in cmd mode

On dsi cmd mode we do not receive vblanks instead
we would get TE and these flags indicate TE is expected on
which port.

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312053841.2794-6-vandita.kulkarni@intel.com

drm/i915/dsi: Add check for periodic command mode

If the GOP has programmed periodic command mode,
we need to disable that which would need a
deconfigure and configure sequence.

v2: Fix sparse error, pass only intel_dsi (Jani)
v3: Use intel_de_read

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312053841.2794-5-vandita.kulkarni@intel.com

drm/i915/dsi: Add cmd mode flags in display mode private flags

Adding TE flags and periodic command mode flags
as part of private flags to indicate what TE interrupts
we would be getting instead of vblanks in case of mipi dsi
command mode.

v2: Add TE flag description (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312053841.2794-4-vandita.kulkarni@intel.com

drm/i915/dsi: Add vblank calculation for command mode

Transcoder timing calculation differ for command mode.

v2: Use is_vid_mode, and use same I915_WRITE (Jani)
v3: Adjust the calculations to reflect dsc compression ratio
v4: Rearrange the vertical and horizontal timing calc, optimize
local variables usage. (Jani)
v5: Fix the values used for calculation, use afe_clk for
byte clock calculation, use intel_de_write/read (Jani)

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312053841.2794-3-vandita.kulkarni@intel.com

drm/i915/dsi: Configure transcoder operation for command mode.

Configure the transcoder to operate in TE GATE command mode
and take TE events from GPIO.
Also disable the periodic command mode, that GOP would have
programmed.

v2: Disable util pin (Jani)
v3: Use intel_de_write (Jani)

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312053841.2794-2-vandita.kulkarni@intel.com

drm/i915/gt: Only delay the context barrier pm

It is strictly sufficient to only delay the intel_engine_pm_put from the
context barrier (and not from the context exit) in order to prevent the
gem_exec_nop contention. Adding the delay to the context exit incurs
noticably extra penalty for soft-rc6.

Fixes: edee52c927ef ("drm/i915/gt: Delay release of engine-pm after last retirement")
Testcase: igt/i915_pm_rc6_residency/rc6-idle
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323192029.20723-1-chris@chris-wilson.co.uk

drm/i915/selftests: mark huge_gem_object as not shrinkable

It looks like some callers expect a non-volatile object, that they do not
want the contents of the pages lost if they happen to not be looking at it.
The shrinker however sees that we mark the pages as DONTNEED and
believes that it can freely reap them. However, since the huge object
use plain pages, they cannot be swapped out as they have no backing
storge, and the only way we can shrink them is by discarding the
contents. In light of the callers wanting to keep the contents around,
both IS_SHRINKABLE and marking the pages as volatile are incorrect.

If we drop the IS_SHRINKABLE flag we avoid the immediate issue of the
shrinker accidentally removing valuable content. We will have to
remember that a huge object is not suitable for exercising the shrinker
interaction -- although we can introduce a shrinkable one if we require.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323130821.47914-1-matthew.auld@intel.com

drm/i915/gt: Delay release of engine-pm after last retirement

Keep the engine-pm awake until the next jiffie, to avoid immediate
ping-pong under moderate load. (Forcing the idle barrier excerbates the
moderate load, dramatically increasing the driver overhead.) On the
other hand, delaying the idle-barrier slightly incurs longer rc6-off
and so more power consumption.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/848
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323092841.22240-4-chris@chris-wilson.co.uk

drm/i915: Extend intel_wakeref to support delayed puts

In some cases we want to hold onto the wakeref for a little after the
last user so that we can avoid having to drop and then immediately
reacquire it. Allow the last user to specify if they would like to keep
the wakeref alive for a short hysteresis.

v2: Embrace bitfield.h for adjustable flags.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323103221.14444-1-chris@chris-wilson.co.uk

drm/i915/selftests/perf: watch out for stolen objects

Stolen memory is allocated at creation, returning -ENOSPC if we run out
space.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1424
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323110301.38806-1-matthew.auld@intel.com

drm/i915: Rely on direct submission to the queue

Drop the pretense of kicking the tasklet (used only for the defunct guc
submission backend, it should just take ownership of the submit!) and so
remove the bh-kicking from around submission.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323092841.22240-5-chris@chris-wilson.co.uk

drm/i915/gem: Avoid gem_context->mutex for simple vma lookup

As we store the handle lookup inside a radix tree, we do not need the
gem_context->mutex except until we need to insert our lookup into the
common radix tree. This takes a small bit of rearranging to ensure that
the lut we insert into the tree is ready prior to actually inserting it
(as soon as it is exposed via the radixtree, it is visible to any other
submission).

v2: For brownie points, remove the goto spaghetti.
v3: Tighten up the closed-handle checks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323092841.22240-8-chris@chris-wilson.co.uk

drm/i915: Avoid live-lock with i915_vma_parked()

Abuse^W Take advantage that we know we are inside the GT wakeref and
that prevents any client execbuf from reopening the i915_vma in order to
claim all the vma to close without having to drop the spinlock to free
each one individually. By keeping the spinlock, we do not have to
restart if we run concurrently with i915_gem_free_objects -- which
causes them both to restart continually and make very very slow
progress.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1361
Fixes: 77853186e547 ("drm/i915: Claim vma while under closed_lock in i915_vma_parked()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323092841.22240-2-chris@chris-wilson.co.uk

drm/i915/gt: Mark timeline->cacheline as destroyed after rcu grace period

Since we take advantage of RCU for some i915_active objects, like the
intel_timeline_cacheline, we need to delay the i915_active_fini until
after the RCU grace period and we perform the kfree -- that is until
after all RCU protected readers.

<3> [108.204873] ODEBUG: assert_init not available (active state 0) object type: i915_active hint: __cacheline_active+0x0/0x80 [i915]
<4> [108.207377] WARNING: CPU: 3 PID: 2342 at lib/debugobjects.c:488 debug_print_object+0x67/0x90
<4> [108.207400] Modules linked in: vgem snd_hda_codec_hdmi x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul snd_hda_intel ghash_clmulni_intel snd_intel_dspcfg snd_hda_codec ax88179_178a snd_hwdep usbnet btusb snd_hda_core btrtl mii btbcm btintel snd_pcm bluetooth ecdh_generic ecc i915 i2c_hid pinctrl_sunrisepoint pinctrl_intel intel_lpss_pci prime_numbers
<4> [108.207587] CPU: 3 PID: 2342 Comm: gem_exec_parall Tainted: G     U            5.6.0-rc6-CI-Patchwork_17047+ #1
<4> [108.207609] Hardware name: Google Soraka/Soraka, BIOS MrChromebox-4.10 08/25/2019
<4> [108.207639] RIP: 0010:debug_print_object+0x67/0x90
<4> [108.207668] Code: 83 c2 01 8b 4b 14 4c 8b 45 00 89 15 87 d2 8a 02 8b 53 10 4c 89 e6 48 c7 c7 38 2b 32 82 48 8b 14 d5 80 2f 07 82 e8 49 d5 b7 ff <0f> 0b 5b 83 05 c3 f6 22 01 01 5d 41 5c c3 83 05 b8 f6 22 01 01 c3
<4> [108.207692] RSP: 0018:ffffc90000e7f890 EFLAGS: 00010282
<4> [108.207723] RAX: 0000000000000000 RBX: ffffc90000e7f8b0 RCX: 0000000000000001
<4> [108.207747] RDX: 0000000080000001 RSI: ffff88817ada8cb8 RDI: 00000000ffffffff
<4> [108.207770] RBP: ffffffffa0341cc0 R08: ffff88816b5a8948 R09: 0000000000000000
<4> [108.207792] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82322d54
<4> [108.207814] R13: ffffffffa0341cc0 R14: ffffffff83df9568 R15: ffff88816064f400
<4> [108.207839] FS:  00007f437d753700(0000) GS:ffff88817ad80000(0000) knlGS:0000000000000000
<4> [108.207863] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [108.207887] CR2: 00007f2ad1fb5000 CR3: 00000001725d8004 CR4: 00000000003606e0
<4> [108.207907] Call Trace:
<4> [108.207959]  debug_object_assert_init+0x15c/0x180
<4> [108.208475]  ? i915_active_acquire_if_busy+0x10/0x50 [i915]
<4> [108.208513]  ? rcu_read_lock_held+0x4d/0x60
<4> [108.208970]  i915_active_acquire_if_busy+0x10/0x50 [i915]
<4> [108.209380]  intel_timeline_read_hwsp+0x81/0x540 [i915]
<4> [108.210262]  __emit_semaphore_wait+0x45/0x1b0 [i915]
<4> [108.210726]  ? i915_request_await_dma_fence+0x143/0x560 [i915]
<4> [108.211156]  i915_request_await_dma_fence+0x28a/0x560 [i915]
<4> [108.211633]  i915_request_await_object+0x24a/0x3f0 [i915]
<4> [108.212102]  eb_submit.isra.47+0x58f/0x920 [i915]
<4> [108.212622]  i915_gem_do_execbuffer+0x1706/0x2c70 [i915]
<4> [108.213071]  ? i915_gem_execbuffer2_ioctl+0xc0/0x470 [i915]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323092841.22240-1-chris@chris-wilson.co.uk

drm/i915/edp: Ignore short pulse when panel powered off

Few edp panels like Sharp is triggering short and long
hpd pulse after panel is getting powered off.
Currently driver is already ignoring long pulse for eDP
panel but in order to process the short pulse, it turns on
the VDD which requires panel power_cycle_delay + panel_power_on_delay
these delay on Sharp panel introduced the responsiveness overhead
of 800ms in the modeset sequence and as well is in suspend
sequence.
Ignoring any short pulse if panel is powered off.

FIXME: It requires to wait for panel_power_off delay in order
to check the panel power status due to pps_lock because panel triggers
short pulse immediately after writing PP_OFF to PP_CTRL register and
wait_panel_off waits for panel_power_off delay with pps_lock held.
This still creates responsiveness overhead of panel_power_off delay.

v2:
- checking vdd along with panel power to ignore the hpd. [Jani,Ville]
v3:
- safer side check to ignore the long hpd when eDP have power,
adding type of hpd to debug log. [Jani]

Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200318081837.23983-1-anshuman.gupta@intel.com

drm/i915/gt: Leave rps->cur_freq on unpark

Don't override our previous frequency we used after parking, and avoid
continually spiking back to the efficient frequency for mostly idle
workloads. Trust our ability to autotune across a workload switch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200322163225.28791-2-chris@chris-wilson.co.uk

drm/i915/gt: Treat idling as a RPS downclock event

If we park/unpark faster than we can respond to RPS events, we never
will process a downclock event after expiring a waitboost, and thus we
will forever restart the GPU at max clocks even if the workload switches
and doesn't justify full power.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1500
Fixes: 3e7abf814193 ("drm/i915: Extract GT render power state management")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200322163225.28791-1-chris@chris-wilson.co.uk
Cc: <stable@vger.kernel.org> # v5.5+

drm/i915/gt: Use the correct err_unlock unwind path for a closed context

A silly cut'n'paste copied the unlocked error path and used it inside
the pin_mutex lock, we need to drop that lock before returning.

Fixes: b412c63f1cba ("drm/i915/gt: Report context-is-closed prior to pinning")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200322123241.17694-1-chris@chris-wilson.co.uk

drm/i915/gt: Report context-is-closed prior to pinning

Our assertion caught that we do try to pin a closed context if userspace
is viciously racing context-closure with execbuf, so make it fail
gracefully.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1492
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200320130159.3922-1-chris@chris-wilson.co.uk

drm/i915: Fix crtc nv12 etc. plane bitmasks for DPMS off

We only consider crtc_state->enable when initially calculating plane
visibility. Later on we try to override the plane's state to invisible
if the crtc is in DPMS off state (crtc_state->active==false).
Unfortunately the code doing that only updates the plane_state.visible
flag and the crtc_state.active_planes bimask, but forgets to update
some of the other plane bitmasks stored in the crtc_state. Namely
crtc_state.nv12_planes is left set up based on the original visibility
check which makes icl_check_nv12_planes() pick a slave plane for the
flagged plane in the bitmask. Later on we hit the watermark code
which sees a plane with a slave assigned and it then makes the
logical assumption that the master plane must itself be visible.
Since the master's plane_state.visible flag was already cleared
we get a WARN.

Fix the problem by clearing all the plane bitmasks for DPMS off.
This is more or less the wrong approach and instead we should
calculate all the plane related state purely based crtc_state->enable
(to guarantee that the subsequent DPMS on can't fail). However in
the past we definitely had some roadblocks to making that happen.
Not sure how many are left these days, but let's stick to the current
approach since it's a much simpler fix to the immediate problem
(the WARN).

v2: Keep the visible=false, it's important (Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200318174515.31637-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/dp: Add writing of DP SDPs

It adds routines that write DP VSC SDP and DP HDR Metadata Infoframe SDP.
In order to pack DP VSC SDP, it adds intel_dp_vsc_sdp_pack() function.
It follows DP 1.4a spec. [Table 2-116: VSC SDP Header Bytes] and
[Table 2-117: VSC SDP Payload for DB16 through DB18]

In order to pack DP HDR Metadata Infoframe SDP, it adds
intel_dp_hdr_metadata_infoframe_sdp_pack() function.
And it follows DP 1.4a spec.
([Table 2-125: INFOFRAME SDP v1.2 Header Bytes] and
[Table 2-126: INFOFRAME SDP v1.2 Payload Data Bytes - DB0 through DB31])
and CTA-861-G spec. [Table-42 Dynamic Range and Mastering InfoFrame].

A mechanism and a naming rule of intel_dp_set_infoframes() function
references intel_encoder->set_infoframes() of intel_hdmi.c .
VSC SDP is used for PSR and Pixel Encoding and Colorimetry Formats cases.
Because PSR routine has its own routine of writing a VSC SDP, when the PSR
is enabled, intel_dp_set_infoframes() does not write a VSC SDP.

v3:
  - Explicitly disable unused DIPs (AVI, GCP, VS, SPD, DRM. They will be
    used for HDMI), when intel_dp_set_infoframes() function will be called.
  - Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp.
v4: Use struct drm_device logging macros
v5:
  - use intel_de_*() functions for register access
  - Addressed review comments from Uma
    Polish commit message and comments
    Add 6bpc to packing of VSC SDP

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211074657.231405-5-gwan-gyeong.mun@intel.com

drm/i915/dp: Add compute routine for DP HDR Metadata Infoframe SDP

It stores computed dp hdr metadata infoframe sdp to infoframes.drm of
crtc state. It referenced intel_hdmi_compute_drm_infoframe().

While computing, we'll also fill out the infoframes.enable bitmask
appropriately.

v2: Wrap a long line.
v4: Use struct drm_device logging macros
v5: Fix typo [Uma]

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211074657.231405-4-gwan-gyeong.mun@intel.com

drm/i915/dp: Add compute routine for DP VSC SDP

In order to support state readout for DP VSC SDP, we need to have a
structure which holds DP VSC SDP payload data such as
"union hdmi_infoframe drm" which is used for DRM infoframe.
It adds a struct drm_dp_vsc_sdp vsc to intel_crtc_state.infoframes.

And it stores computed dp vsc sdp to infoframes.vsc of crtc state.
While computing we'll also fill out the inforames.enable bitmask
appropriately.

The compute routine follows DP 1.4 spec [Table 2-117: VSC SDP Payload for
DB16 through DB18].

v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v5:
- Rebased
- Add warning where a bpc is 6 and a pixel format is RGB.
v7: Fix the wrong check of combination bpc 6 and RGB pixelformat

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211074657.231405-3-gwan-gyeong.mun@intel.com

drm: Add DP1.4 VSC SDP Payload related Data Structures

It adds new enumeration definitions for VSC SDP Payload for Pixel
Encoding/Colorimetry Format.
And it adds a new drm data structure for DP VSC SDP.

enum dp_colorspace and enum dp_colorimetry correspond "Pixel Encoding and
Colorimetry Formats". enum dp_dynamic_range corresponds "Dynamic Range".
And enum dp_content_type corresponds "Content Type"
All of them are based on DP 1.4 spec [Table 2-117: VSC SDP Payload for
DB16 through DB18].

v3: Add a new drm data structure for DP VSC SDP
v5: Addressed review comments from Uma
    - Add kernel docs for added data structures
    - Rename enum dp_colorspace to dp_pixelformat
    - Polish commit message
    - Fix typos
    - Drop self-explanatory comments

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211074657.231405-2-gwan-gyeong.mun@intel.com

drm/i915/gt: Cancel a hung context if already closed

Use the restored ability to check if a context is closed to decide
whether or not to immediately ban the context from further execution
after a hang.

Fixes: be90e344836a ("drm/i915/gt: Cancel banned contexts after GT reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319170707.8262-2-chris@chris-wilson.co.uk

drm/i915: Use explicit flag to mark unreachable intel_context

I need to keep the GEM context around a bit longer so adding an explicit
flag for syncing execbuf with closed/abandonded contexts.

v2:
* Use already available context flags. (Chris)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319170707.8262-1-chris@chris-wilson.co.uk

drm/i915: Prefer '%ps' for printing function symbol names

%pS includes the offset, which is useful for return addresses but noise
when we are pretty printing a known (and expected) function entry point.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319091943.7815-1-chris@chris-wilson.co.uk

drm/i915/workarounds: convert to drm_device based logging macros.

Replace the use of printk based drm logging macros with the struct
drm_device based logging macros.

Note that this converts DRM_DEBUG_DRIVER() to drm_dbg().

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314183344.17603-8-wambui.karugax@gmail.com

drm/i915/rps: use struct drm_device based logging macros.

Replace the use of the printk based drm logging macros with the struct
drm_device based logging macros in i915/gt/intel_rps.c. This also
involves extracting the drm_i915_private device pointer from various
intel types.

This converts the instances of DRM_DEBUG_DRIVER to drm_dbg() while not
converting DRM_DEBUG() instances due to the lack of an analogous
drm_device based macro.

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314183344.17603-7-wambui.karugax@gmail.com

drm/i915/ring_submission: use drm_device based logging macros.

Replace the use of printk based drm logging macros to the struct
drm_device based logging macros in i915/gt/intel_ring_submission.c.
This was done using the following semantic patch that transforms based
on the existence of a drm_i915_private device:
@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

New checkpatch warnings were fixed manually.

Note that this converts DRM_DEBUG_DRIVER to drm_dbg().

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314183344.17603-6-wambui.karugax@gmail.com

drm/i915/renderstate: use struct drm_device based logging macros.

Replace the use of the printk based drm logging macros with the struct
drm_device based logging macros.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314183344.17603-5-wambui.karugax@gmail.com

drm/i915/rc6: convert to struct drm_device based logging macros.

Converts various instances of the printk based drm logging macros to use
the struct drm_device logging macros. This also involves extracting the
drm_i915_private device from intel types in some cases.

Note that this converts DRM_DEBUG_DRIVER() to drm_dbg().

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314183344.17603-4-wambui.karugax@gmail.com

drm/i915/lrc: convert to struct drm_device based logging macros.

Convert various instances of the printk based drm logging macros to the
struct drm_device based logging macros.

Note that this converts DRM_DEBUG_DRIVER() to drm_dbg() but does not
convert DRM_DEBUG() due to the lack of an analogous drm_device based
macro.

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314183344.17603-3-wambui.karugax@gmail.com

drm/i915/ggtt: convert to drm_device based logging macros.

Converts various instances of the printk based drm logging macros to use
the struct drm_device based logging macros in i915/gt/intel_ggtt.c.
This change was done using the following coccinelle script that matches
based on the existence of a drm_i915_private device:
@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

New checkpatch warnings were fixed manually.

Note that this converts DRM_DEBUG_DRIVER to drm_dbg()

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314183344.17603-2-wambui.karugax@gmail.com

drm/i915/tgl: Add new PCI IDs to TGL

Adding 4 new PCI IDs to TGL
Bspec: 44455

Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200318221240.8180-1-swathi.dhanavanthri@intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

drm/i915/dp: Add dpcd link_rate quirk for Apple 15" MBP 2017 (v3)

This fixes a problem found on the MacBookPro 2017 Retina panel.

The panel reports 10 bpc color depth in its EDID, and the
firmware chooses link settings at boot which support enough
bandwidth for 10 bpc (324000 kbit/sec = multiplier 0xc),
but the DP_MAX_LINK_RATE dpcd register only reports
2.7 Gbps (multiplier value 0xa) as possible, in direct
contradiction of what the firmware successfully set up.

This restricts the panel to 8 bpc, not providing the full
color depth of the panel.

This patch adds a quirk specific to the MBP 2017 15" Retina
panel to add the additiional 324000 kbps link rate during
edp setup.

Link to previous discussion of a different attempted fix
with Ville and Jani:

https://patchwork.kernel.org/patch/11325935/

v2: Follow Jani's proposal of defining quirk_rates[] instead
of just appending 324000. This for better clarity.

v3: Rebased onto current drm-tip, as of 16-March-2020. Adapt
to new edid_quirks parameter of drm_dp_has_quirk().

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316042340.4783-1-mario.kleiner.de@gmail.com

drm/i915/hdcp: convert to struct drm_device based logging.

Converts various instances of the printk based drm logging macros to the
struct drm_device based logging macros in i915/display/intel_hdcp.c.
This also involves extracting the drm_i915_private device from the
intel_connector type for use in the macros.

v2 by Jani:
- rebase

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/47d5e88dedc08ee48938344296ada550dedd5f90.1583766715.git.jani.nikula@intel.com

drm/i915/fbdev: convert to drm_device based logging.

Convert various instances of printk based drm logging macros to the
struct drm_device based logging macros in i915/display/intel_fbdev.c.
This also involves extracting the drm_i915_private device from various
intel types.

v2 by Jani:
- fix the final one too

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7081a49d20cc46b1b1144c83a4e21294d121d8a7.1583766715.git.jani.nikula@intel.com

drm/i915/fbc: convert to drm_device based logging macros.

This replaces the uses of the printk based drm logging macros with the
struct drm_device based logging macros in i915/display/intel_fbc.c.
This transformation was done using the following coccinelle semantic
patch that matches based on the existence of a drm_i915_private device
pointer:
@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

New checkpatch warnings were addressed manually.

v2 by Jani:
- also convert pr_info_once to drm based logging

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/32a92f1d4e4d01131605b17bec831517e39c5902.1583766715.git.jani.nikula@intel.com

drm/i915/color: Extract icl_read_luts()

For icl+, have hw read out to create hw blob of gamma
lut values. icl+ platforms supports multi segmented gamma
mode by default, add hw lut creation for this mode.

This will be used to validate gamma programming using dsb
(display state buffer) which is a tgl specific feature.

v2: -readout code for multisegmented gamma has to come
     up with some intermediate entries that aren't preserved
     in hardware (Jani N)
    -linear interpolation (Ville)
    -moved common code to check gamma_enable to specific funcs,
     since icl doesn't support that
v3: -use u16 instead of __u16 [Jani N]
    -used single lut [Jani N]
    -improved and more readable for loops [Jani N]
    -read values directly to actual locations and then fill gaps [Jani N]
    -moved cleaning to patch 1 [Jani N]
    -renamed icl_read_lut_multi_seg() to icl_read_lut_multi_segment to
     make it similar to icl_load_luts()
    -renamed icl_compute_interpolated_gamma_blob() to
     icl_compute_interpolated_gamma_lut_values() more sensible, I guess
v4: -removed interpolated func for creating gamma lut values
    -removed readouts of fine and coarse segments, failure to read PAL_PREC_DATA
     correctly
v5: -added gamma_enable check inside read_luts()
v6: -renamed intel_color_lut_entry_equal() to intel_color_lut_entries_equal() [Ville]
    -changed if-else to switch [Ville]
    -removed intel_color_lut_entry_multi_equal() [Ville]
v7: -checkpatch warnings
v8: -rebased
v9: -rebased, aligned with Ville's style of gamma cleanup

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200317135736.14305-1-swati2.sharma@intel.com

drm/i915: Enable non-contiguous pipe fusing

As we have already enabled supported infrastructure for
non-contiguous pipe fusing in driver, we don't require non-contiguous
pipe_mask check anymore.
It is an unlike condition, it make sense to remove this condition.

changes since RFC:
- using intel_pipe_mask_is_valid() function to check integrity of
pipe_mask. [Ville]
v2:
- simplify condition in intel_pipe_mask_is_valid(). [Ville]
v3:
- removed non-contiguous pipe fusing check. [Lucas]

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200318094448.26239-1-anshuman.gupta@intel.com

drm/i915/perf: Invalidate OA TLB on when closing perf stream

On running several back to back perf capture sessions involving closing
and opening the perf stream, invalid OA reports are seen in the
beginning of the OA buffer in some sessions. Fix this by invalidating OA
TLB when the perf stream is closed or disabled on gen12.

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309211057.38575-1-umesh.nerlige.ramappa@intel.com

drm/i915/gt: Always reschedule the new heartbeat

In order to better respond to new heartbeat intervals given via sysfs,
always reprogramme an active heartbeat upon change (i.e. use
mod_delayed_work to reschedule rather than queue_delayed_work which
ignores an already active work.)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200317163208.30010-1-chris@chris-wilson.co.uk

drm/i915: Fix up documentation paths after file moving

Redirect references to i915_gem_fence_reg.c to gt/intel_ggtt_fencing.c

Fixes: dec9cf9ee8cb ("drm/i915/gt: Pull restoration of GGTT fences underneath the GT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200317141250.20903-1-chris@chris-wilson.co.uk

drm/i915/perf: introduce global sseu pinning

On Gen11 powergating half the execution units is a functional
requirement when using the VME samplers. Not fullfilling this
requirement can lead to hangs.

This unfortunately plays fairly poorly with the NOA requirements. NOA
requires a stable power configuration to maintain its configuration.

As a result using OA (and NOA feeding into it) so far has required us
to use a power configuration that can work for all contexts. The only
power configuration fullfilling this is powergating half the execution
units.

This makes performance analysis for 3D workloads somewhat pointless.

Failing to find a solution that would work for everybody, this change
introduces a new i915-perf stream open parameter that punts the
decision off to userspace. If this parameter is omitted, the existing
Gen11 behavior remains (half EU array powergating).

This change takes the initiative to move all perf related sseu
configuration into i915_perf.c

v2: Make parameter priviliged if different from default

v3: Fix context modifying its sseu config while i915-perf is enabled

v4: Always consider global sseu a privileged operation (Tvrtko)
    Override req_sseu point in intel_sseu_make_rpcs() (Tvrtko)
    Remove unrelated changes (Tvrtko)

v5: Some typos (Tvrtko)
    Process sseu param in read_properties_unlocked() (Tvrtko)

v6: Actually commit the bits from v5...
    Fixup some checkpath warnings

v7: Only compare engine uabi field (Chris)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200317132222.2638719-3-lionel.g.landwerlin@intel.com

drm/i915/perf: remove redundant power configuration register override

The caller of i915_oa_init_reg_state() already sets this.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200317132222.2638719-2-lionel.g.landwerlin@intel.com

drm/i915/perf: remove generated code

A little bit of history :

   Back when i915-perf was introduced (4.13), there was no way to
   dynamically add new OA configurations to i915. Only the generated
   configs baked in at build time were allowed.

   It quickly became obvious that we would need to allow applications
   to upload their own configurations, for instance to be able to test
   new ones, and so by the next stable version (4.14) we added uAPIs
   to allow uploading new configurations.

   When adding that capability, we took the opportunity to remove most
   HW configurations except the TestOa one which is a configuration
   IGT would rely on to verify that the HW is outputting correct
   values. At the time it made sense to have that confiuration in at
   the same time a given HW platform added to the i915-perf driver.

Now that IGT has become the reference point for HW configurations (see
commit 53f8f541ca ("lib: Add i915_perf library"), previously this was
located in the GPUTop repository), the need for having those
configurations in i915-perf is gone.

On the Mesa side, we haven't relied on this test configuration for a
while. The MDAPI library always required 4.14 feature level and always
loaded its configuration into i915.

I'm sure nobody will miss this generated stuff in i915 :)

v2: Fix selftests by creating an empty config

v3: Fix unlocking on allocation error (Dan Carpenter)

v4: Fixup checkpatch warnings

v5: Fix incorrect unlock in error path (Umesh)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200317132222.2638719-1-lionel.g.landwerlin@intel.com

drm/i915/gem: Check for a closed context when looking up an engine

Beware that the context may already be closed as we try to lookup an
engine.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1389
Fixes: 130a95e9098e ("drm/i915/gem: Consolidate ctx->engines[] release")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316161447.18410-1-chris@chris-wilson.co.uk

drm/i915/gt: Restore check for invalid vma for fencing

Apparently we do try and attach a fence to an invalid vma (during
execbuf) so we cannot simply assert it never happens and report EINVAL
instead.

Fixes: dec9cf9ee8cb ("drm/i915/gt: Pull restoration of GGTT fences underneath the GT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316205450.15843-1-chris@chris-wilson.co.uk

drm/i915/gt: Allocate i915_fence_reg array

Since the number of fence regs can vary dramactically between platforms,
allocate the array on demand so we don't waste as much space.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316113846.4974-4-chris@chris-wilson.co.uk

drm/i915: Remove manual save/resume of fence register state

Since we always reload the fence register state on runtime resume,
having it explicitly in the S0ix resume code is redundant. Indeed, it
is not even being used!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316113846.4974-3-chris@chris-wilson.co.uk

drm/i915/gt: Pull restoration of GGTT fences underneath the GT

Make the GT responsible for restoring its fence when it wakes up from
suspend.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316113846.4974-2-chris@chris-wilson.co.uk

drm/i915: Move GGTT fence registers under gt/

Since the fence registers control HW detiling through the GGTT
aperture, make them a part of the intel_ggtt under gt/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316113846.4974-1-chris@chris-wilson.co.uk

drm/i915/gt: Restrict gen7 w/a batch to Haswell

The residual w/a batch is causing system instablity on Ivybridge and
Baytrail under some workloads, so disable until resolved.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1405
Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311103640.26572-1-chris@chris-wilson.co.uk

drm/i915: Update DRIVER_DATE to 20200313

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/tgl: Remove require_force_probe protection

We have a few TGL machines in our CI and it is mostly green with
failures in tests that will not impact future Linux installations.
Also there is no warnings, errors, flickering or any visual defects
while doing ordinary tasks like browsing and editing documents in a
dual monitor setup.

As a reminder i915.require_force_probe was created to protect
future Linux installation's iso images that might contain a
kernel from the enabling time of the new platform. Without this
protection most of linux installation was recommending
nomodeset option during installation that was getting stick
there after installation.

Reference: https://intel-gfx-ci.01.org/tree/drm-tip/fi-tgl-u.html
Reference: https://intel-gfx-ci.01.org/tree/drm-tip/shard-tglb.html
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218230822.66801-1-jose.souza@intel.com

drm/i915: Add Wa_1605460711 / Wa_1408767742 to ICL and EHL

This workaround appears under two different numbers (and with somewhat
confused stepping applicability on ICL). Ultimately it appears we
should just implement this for all stepping of ICL and EHL.

Note that this is identical to Wa_1407928979:tgl that already exists in
our driver too...yet another number referencing the same actual
workaround.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-7-matthew.d.roper@intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: Apply Wa_1406680159:icl,ehl as an engine workaround

The register this workaround updates is a render engine register in the
MCR range, so we should initialize this in rcs_engine_wa_init() rather
than gt_wa_init().

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1222
Fixes: 36204d80bacb ("drm/i915/icl: Wa_1406680159")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-6-matthew.d.roper@intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: Add Wa_1406306137:icl,ehl

v2:
- Move to context workarounds. ROW_CHICKEN4 is part of the context
image on gen11 (although it isn't on gen12).

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-5-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Add Wa_1604278689:icl,ehl

The bspec description for this workaround tells us to program
0xFFFF_FFFF into both FBC_RT_BASE_ADDR_REGISTER_* registers, but we've
previously found that this leads to failures in CI.  Our suspicion is
that the failures are caused by this valid turning on the "address valid
bit" even though we're intentionally supplying an invalid address.
Experimentation has shown that setting all bits _except_ for the
RT_VALID bit seems to avoid these failures.

v2:
- Mask off the RT_VALID bit.  Experimentation with CI trybot indicates
   that this is necessary to avoid reset failures on BCS.

v3:
- Program RT_BASE before RT_BASE_UPPER so that the valid bit is turned
   off by the first write.  (Chris)

Bspec: 11388
Bspec: 33451
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-4-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>