drm/msm/mdp5: Advertize 180 degree rotation

Since the hardware can apparently do both X and Y reflection, we
can advertize also 180 degree rotation as thats just X+Y reflection.

v2: Drop the BIT()

Cc: Rob Clark <robdclark@gmail.com>
Cc: Jilai Wang <jilaiw@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477077768-4274-3-git-send-email-ville.syrjala@linux.intel.com

drm/msm/mdp5: Use per-plane rotation property

The global mode_config.rotation_property is going away, switch over to
per-plane rotation_property.

v2: Drop the BIT()

Cc: Rob Clark <robdclark@gmail.com>
Cc: Jilai Wang <jilaiw@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477077768-4274-2-git-send-email-ville.syrjala@linux.intel.com

drm: Use u64 for intermediate dotclock calculations

We have reached the era where monitor bandwidths now exceed 31bits in
frequency calculations, though as we stored them in kHz units we are
safe from overflow in the modelines for some time.

[   48.723720] UBSAN: Undefined behaviour in ../drivers/gpu/drm/drm_modes.c:325:49
[   48.726943] signed integer overflow:
[   48.728503] 2240 * 1000000 cannot be represented in type 'int'

Reported-by: Martin Liška <marxin.liska@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98372
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161021141540.26837-1-chris@chris-wilson.co.uk

drm/i915: Use the per-plane rotation property

On certain platforms not all planes support the same set of
rotations/reflections, so let's use the per-plane property
for this.

This is already a problem on SKL when we use the legay cursor plane
as it only supports 0|180 whereas the universal planes support
0|90|180|270, and it will be a problem on CHV soon.

v2: Use drm_plane_create_rotation_property() helper
v3: Drop the BIT(), use INTEL_GEN()

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-12-git-send-email-ville.syrjala@linux.intel.com

drm/omap: Use per-plane rotation property

The global mode_config.rotation_property is going away, switch over to
per-plane rotation_property.

Not sure I got the annoying crtc rotation_property handling right.
Might work, or migth not.

v2: Drop the BIT()
    Don't create rotation property twice for each primary plane

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[danvet: Add comment per discussion between Tomi&Ville.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-8-git-send-email-ville.syrjala@linux.intel.com

drm/omap: Set rotation property initial value to BIT(DRM_ROTATE_0) insted of 0

0 isn't a valid rotation property value, so let's set the initial value
of the property to BIT(DRM_ROTATE_0) instead.

v2: Drop the BIT()

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-7-git-send-email-ville.syrjala@linux.intel.com

drm/atmel-hlcdc: Use per-plane rotation property

The global mode_config.rotation_property is going away, switch over to
per-plane rotation_property.

v2: Propagate error upwards (Boris)
v3: Drop the BIT()

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-6-git-send-email-ville.syrjala@linux.intel.com

drm/arm: Use per-plane rotation property

The global mode_config.rotation_property is going away, switch over to
per-plane rotation_property.

v2: Drop the BIT()

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-5-git-send-email-ville.syrjala@linux.intel.com

drm: Add support for optional per-plane rotation property

Not all planes on the system may support the same rotations/reflections,
so make it possible to create a separate property for each plane.
This way userspace gets told exactly which rotations/reflections are
possible for each plane.

v2: Add drm_plane_create_rotation_property() helper
v3: Drop the BIT(), __builtin_ffs(x) - 1,
    Moar WARNs for bad parameters
    Deal with superfluous code shuffling

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-4-git-send-email-ville.syrjala@linux.intel.com

drm/atomic: Reject attempts to use multiple rotation angles at once

The rotation property should only accept exactly one rotation angle
at once. Let's reject attempts to set none or multiple angles.

Testcase: igt/kms_rotation_crc/bad-rotation
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-3-git-send-email-ville.syrjala@linux.intel.com

drm: Add drm_rotation_90_or_270()

We have intel_rotation_90_or_270() in i915 to check if the rotation is
90 or 270 degrees. Similar checks are elsewhere in drm, so let's move
the helper into a central place and use it everwhere.

v2: Drop the BIT()
    Convert all new intel_rotation_90_or_270() calls
    Deal with superfluous code shuffling

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-2-git-send-email-ville.syrjala@linux.intel.com

dma-buf/sync_file: hold reference to fence when creating sync_file

fence referencing was out of balance. It was not taking any ref to the
fence at creating time, but it was putting a reference when freeing the
sync file.

This patch fixes the balancing issue by getting a reference for the fence
when creating the sync_file.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476899313-22241-1-git-send-email-gustavo@padovan.org

drm/virtio: kconfig: Fixup white space.

Use tabs instead of spaces.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1475913318-12275-1-git-send-email-peter.griffin@linaro.org
Link: http://patchwork.freedesktop.org/patch/msgid/1476238699-25820-1-git-send-email-jiang.biao2@zte.com.cn

drm/fence: release fence reference when canceling event

If the event gets canceled we also need to put away the fence
reference it holds.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476975005-30441-3-git-send-email-gustavo@padovan.org

drm/i915: Handle early failure during intel_get_load_detect_pipe

In the error path, we have to be ready to handle an error before either
the state or restore_state have been allocated.

[  397.001342] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  397.001419] IP: [<ffffffffa04347b4>] intel_get_load_detect_pipe+0xe4/0x610 [i915]
[  397.001502] PGD 136a2a067
[  397.001523] PUD 134b5f067
[  397.001546] PMD 0

[  397.001569] Oops: 0002 [#1] PREEMPT SMP
[  397.001599] Modules linked in: snd_hda_intel i915 cdc_ncm usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm lpc_ich mei_me mei sdhci_pci sdhci mmc_core e1000e ptp pps_core [last unloaded: i915]
[  397.001902] CPU: 1 PID: 9287 Comm: kms_force_conne Tainted: G     U          4.9.0-rc1-CI-CI_DRM_1730+ #1
[  397.001965] Hardware name: LENOVO 2356GCG/2356GCG, BIOS G7ET31WW (1.13 ) 07/02/2012
[  397.002017] task: ffff880138c38040 task.stack: ffffc900083e4000
[  397.002057] RIP: 0010:[<ffffffffa04347b4>]  [<ffffffffa04347b4>] intel_get_load_detect_pipe+0xe4/0x610 [i915]
[  397.002153] RSP: 0018:ffffc900083e7ae8  EFLAGS: 00010286
[  397.002191] RAX: 00000000ffffffdd RBX: ffffc900083e7bc8 RCX: 0000000000000006
[  397.002239] RDX: 0000000000000006 RSI: ffff880138c388b8 RDI: ffffc900083e79e0
[  397.002287] RBP: ffffc900083e7b78 R08: 0000000000000000 R09: 0000000000000000
[  397.002335] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[  397.002386] R13: ffff8801305e1158 R14: 00000000ffffffdd R15: 0000000000000000
[  397.002434] FS:  00007fea1b03c740(0000) GS:ffff88013e240000(0000) knlGS:0000000000000000
[  397.002488] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  397.002528] CR2: 0000000000000000 CR3: 00000001361da000 CR4: 00000000001406e0
[  397.002576] Stack:
[  397.002592]  ffff88013046f180 0000000000000000 ffffc900083e7bc0 0000000000000000
[  397.002655]  0000000000000000 ffff8801306bd038 ffff88012e980000 ffffc90000000001
[  397.002718]  ffffc90000000000 ffff880136b8ca88 ffff88012e980890 ffff88012e980540
[  397.002780] Call Trace:
[  397.002828]  [<ffffffffa044e8c4>] intel_crt_detect+0x3c4/0x8f0 [i915]
[  397.002876]  [<ffffffff810e37fa>] ? vprintk_default+0x1a/0x20
[  397.002918]  [<ffffffff8116eb68>] ? printk+0x43/0x4b
[  397.002956]  [<ffffffff81546b06>] drm_helper_probe_single_connector_modes+0x406/0x4f0
[  397.003014]  [<ffffffff81819c09>] ? mutex_unlock+0x9/0x10
[  397.003054]  [<ffffffff815723dc>] drm_mode_getconnector+0x33c/0x3c0
[  397.003099]  [<ffffffff810ed59d>] ? debug_lockdep_rcu_enabled+0x1d/0x20
[  397.003147]  [<ffffffff811a6bae>] ? __might_fault+0x3e/0x90
[  397.003191]  [<ffffffff8155aaf6>] drm_ioctl+0x1f6/0x480
[  397.003231]  [<ffffffff815720a0>] ? drm_mode_connector_property_set_ioctl+0x30/0x30
[  397.003285]  [<ffffffff8120308e>] do_vfs_ioctl+0x8e/0x690
[  397.003324]  [<ffffffff810a102c>] ? task_work_run+0x8c/0xb0
[  397.003366]  [<ffffffff810d6d92>] ? trace_hardirqs_on_caller+0x122/0x1b0
[  397.003412]  [<ffffffff812036cc>] SyS_ioctl+0x3c/0x70
[  397.003451]  [<ffffffff8181df2e>] entry_SYSCALL_64_fastpath+0x1c/0xb1
[  397.003496] Code: 85 c0 41 89 c6 75 57 49 8b 85 f0 00 00 00 48 89 de 45 31 ff 48 8d 78 20 e8 1a 89 13 e1 45 31 c9 85 c0 41 89 c6 0f 84 2f 01 00 00 <f0> 41 83 29 01 74 53 f0 41 83 2f 01 74 2d 41 83 fe dd 75 35 48
[  397.003837] RIP  [<ffffffffa04347b4>] intel_get_load_detect_pipe+0xe4/0x610 [i915]
[  397.003921]  RSP <ffffc900083e7ae8>
[  397.003947] CR2: 0000000000000000

Testcase: igt/kms_force_connector_basic/force-load-detect # ivb-3720m
Fixes: 0853695c3ba4 ("drm: Add reference counting to drm_atomic_state"
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161019113743.19847-1-chris@chris-wilson.co.uk

drm/fb_cma_helper: do not free fbdev if there is none

If fbdev emulation is not in use (or not built-in), fb_helper.fbdev
is NULL. Don't call calling drm_fbdev_cma_defio_fini in this case.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161020003221.2941-2-stefan@agner.ch

drm: fix sparse warnings on undeclared symbols in crc debugfs

Fixes sparse warnings:

drivers/gpu/drm/drm_debugfs_crc.c:118:30: warning: symbol
'drm_crtc_crc_control_fops' was not declared. Should it be static?

drivers/gpu/drm/drm_debugfs_crc.c:264:30: warning: symbol
'drm_crtc_crc_data_fops' was not declared. Should it be static?

drivers/gpu/drm/drm_debugfs_crc.c:281:5: warning: symbol
'drm_debugfs_crtc_crc_add' was not declared. Should it be static?

Fixes: 9edbf1fa600a ("drm: Add API for capturing frame CRCs")
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476790115-28665-1-git-send-email-jani.nikula@intel.com

gpu: Remove depends on RESET_CONTROLLER when not a provider

These GPU drivers only depend on the RESET_CONTROLLER config
option to fix build issues that existed when there weren't stub
reset APIs for reset controller consumers. Given that these
drivers aren't providing any reset controllers themselves, they
don't actually depend on the API to build (just to function) so
they don't need to depend on it. Remove the dependency to fix
recursive build errors like the following:

drivers/usb/Kconfig:39:error: recursive dependency detected!
drivers/usb/Kconfig:39: symbol USB is selected by MOUSE_APPLETOUCH
drivers/input/mouse/Kconfig:187:        symbol MOUSE_APPLETOUCH depends on INPUT
drivers/input/Kconfig:8:        symbol INPUT is selected by VT
drivers/tty/Kconfig:12: symbol VT is selected by FB_STI
drivers/video/fbdev/Kconfig:674:        symbol FB_STI depends on FB
drivers/video/fbdev/Kconfig:5:  symbol FB is selected by DRM_KMS_FB_HELPER
drivers/gpu/drm/Kconfig:42:     symbol DRM_KMS_FB_HELPER is selected by DRM_KMS_CMA_HELPER
drivers/gpu/drm/Kconfig:98:     symbol DRM_KMS_CMA_HELPER is selected by DRM_IMX
drivers/gpu/drm/imx/Kconfig:1:  symbol DRM_IMX depends on IMX_IPUV3_CORE
drivers/gpu/ipu-v3/Kconfig:1:   symbol IMX_IPUV3_CORE depends on RESET_CONTROLLER
drivers/reset/Kconfig:4:        symbol RESET_CONTROLLER is selected by USB_CHIPIDEA
drivers/usb/chipidea/Kconfig:1: symbol USB_CHIPIDEA depends on USB_EHCI_HCD
drivers/usb/host/Kconfig:84:    symbol USB_EHCI_HCD depends on USB

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <dri-devel@lists.freedesktop.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: robdclark@gmail.com
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161018205719.20575-1-stephen.boyd@linaro.org

i915: don't call drm_atomic_state_put on invalid pointer

The introduction of reference counting on the state structures caused
sanitize_watermarks() in i915 to break in the error handling case,
as pointed out by gcc -Wmaybe-uninitialized

drivers/gpu/drm/i915/intel_display.c: In function ‘intel_modeset_init’:
include/drm/drm_atomic.h:224:2: error: ‘state’ may be used uninitialized in this function [-Werror=maybe-uninitialized]

This changes the function back to only drop the reference count
when it was successfully allocated first.

Fixes: 0853695c3ba4 ("drm: Add reference counting to drm_atomic_state")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161018151652.2690201-1-arnd@arndb.de

drm: Don't export the drm_fb_get_bpp_depth() function

The function is only used by the drm_helper_mode_fill_fb_struct() core
function to fill the drm_framebuffer bpp and depth fields, used by
drivers that haven't been converted to use pixel formats directly yet.
It should not be used by new drivers, so inline it in its only caller.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-14-git-send-email-laurent.pinchart@ideasonboard.com

drm/arm: mali-dp: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()

The driver doesn't need the color depth, only the number of bits per
pixel. Use the right API.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-13-git-send-email-laurent.pinchart@ideasonboard.com

drm: vmwgfx: Replace drm_fb_get_bpp_depth() with drm_format_info()

The driver is the last users of the drm_fb_get_bpp_depth() function. It
should ideally be converted to use struct drm_mode_fb_cmd2 instead of
the legacy struct drm_mode_fb_cmd internally, but that will require
broad changes across the code base. As a first step, replace
drm_fb_get_bpp_depth() with drm_format_info() in order to stop exporting
the function to drivers.

The new DRM_ERROR() message comes from the vmw_create_dmabuf_proxy(),
vmw_kms_new_framebuffer_surface() and vmw_kms_new_framebuffer_dmabuf()
functions that currently print an error if the pixel format is
unsupported.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-12-git-send-email-laurent.pinchart@ideasonboard.com

drm: radeon: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()

The driver needs the number of bytes per pixel, not the bpp and depth
info meant for fbdev compatibility. Use the right API.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-11-git-send-email-laurent.pinchart@ideasonboard.com

drm: amdgpu: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()

The driver needs the number of bytes per pixel, not the bpp and depth
info meant for fbdev compatibility. Use the right API.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-10-git-send-email-laurent.pinchart@ideasonboard.com

drm: gma500: Replace drm_fb_get_bpp_depth() with drm_format_info()

The driver uses drm_fb_get_bpp_depth() to check whether it can support
the format requested by userspace when creating a framebuffer. This
isn't the right API, as it doesn't differentiate between RGB formats
other than on a depth and bpp basis.

Fixing this requires non trivial changes to the drivers internals. As a
first step, replace usage of the drm_fb_get_bpp_depth() function with an
equivalent check based on drm_format_info(). This is part of a wider
effort to remove usage of the drm_fb_get_bpp_depth() function in
drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-9-git-send-email-laurent.pinchart@ideasonboard.com

drm: cirrus: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()

The driver doesn't need the color depth, only the number of bits per
pixel. Use the right API.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-8-git-send-email-laurent.pinchart@ideasonboard.com

drm: tilcdc: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()

The driver needs the number of bytes per pixel, not the bpp and depth
info meant for fbdev compatibility. Use the right API.

In the tilcdc_crtc_mode_set() function compute the hardware register
value directly from the pixel format instead of computing the number of
bits per pixels first.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-7-git-send-email-laurent.pinchart@ideasonboard.com

drm: hdlcd: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()

The driver needs the number of bytes per pixel, not the bpp and depth
info meant for fbdev compatibility. Use the right API.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-6-git-send-email-laurent.pinchart@ideasonboard.com

drm: WARN when calling drm_format_info() for an unsupported format

The format helpers have historically treated unsupported formats as part
of the default case, returning values that are likely wrong. We can't
change this behaviour now without risking breaking drivers in difficult
to detect ways, but we can WARN on unsupported formats to catch faulty
callers.

The only exception is the framebuffer_check() function that calls
drm_format_info() to validate the format passed from userspace. This is
a valid use case that shouldn't generate a warning.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-5-git-send-email-laurent.pinchart@ideasonboard.com

drm: Use drm_format_info() in DRM core code

Replace calls to the drm_format_*() helper functions with direct use of
the drm_format_info structure. This improves efficiency by removing
duplicate lookups.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-4-git-send-email-laurent.pinchart@ideasonboard.com

drm: Implement the drm_format_*() helpers as drm_format_info() wrappers

Turn the drm_format_*() helpers into wrappers around the drm_format_info
lookup function to centralize all format information in a single place.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-3-git-send-email-laurent.pinchart@ideasonboard.com

drm: Centralize format information

Various pieces of information about DRM formats (number of planes, color
depth, chroma subsampling, ...) are scattered across different helper
functions in the DRM core. Callers of those functions often need to
access more than a single parameter of the format, leading to
inefficiencies due to multiple lookups.

Centralize all format information in a data structure and create a
function to look up information based on the format 4CC.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-2-git-send-email-laurent.pinchart@ideasonboard.com

drm: avoid uninitialized timestamp use in wait_vblank

gcc warns about the timestamp in drm_wait_vblank being possibly
used without an initialization:

drivers/gpu/drm/drm_irq.c: In function 'drm_crtc_send_vblank_event':
drivers/gpu/drm/drm_irq.c:992:24: error: 'now.tv_usec' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/gpu/drm/drm_irq.c:1069:17: note: 'now.tv_usec' was declared here
drivers/gpu/drm/drm_irq.c:991:23: error: 'now.tv_sec' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This can happen if drm_vblank_count_and_time() returns 0 in its
error path. To sanitize the error case, I'm changing that function
to return a zero timestamp when it fails.

Fixes: e6ae8687a87b ("drm: idiot-proof vblank")
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161017221355.1861551-6-arnd@arndb.de

drm: Add API for capturing frame CRCs

Adds files and directories to debugfs for controlling and reading frame
CRCs, per CRTC:

dri/0/crtc-0/crc
dri/0/crtc-0/crc/control
dri/0/crtc-0/crc/data

Drivers can implement the set_crc_source callback() in drm_crtc_funcs to
start and stop generating frame CRCs and can add entries to the output
by calling drm_crtc_add_crc_entry.

v2:
    - Lots of good fixes suggested by Thierry.
    - Added documentation.
    - Changed the debugfs layout.
    - Moved to allocate the entries circular queue once when frame
      generation gets enabled for the first time.
v3:
    - Use the control file just to select the source, and start and stop
      capture when the data file is opened and closed, respectively.
    - Make variable the number of CRC values per entry, per source.
    - Allocate entries queue each time we start capturing as now there
      isn't a fixed number of CRC values per entry.
    - Store the frame counter in the data file as a 8-digit hex number.
    - For sources that cannot provide useful frame numbers, place
      XXXXXXXX in the frame field.

v4:
    - Build only if CONFIG_DEBUG_FS is enabled.
    - Use memdup_user_nul.
    - Consolidate calculation of the size of an entry in a helper.
    - Add 0x prefix to hex numbers in the data file.
    - Remove unnecessary snprintf and strlen usage in read callback.

v5:
    - Made the crcs array in drm_crtc_crc_entry fixed-size
    - Lots of other smaller improvements suggested by Emil Velikov

v7:
    - Move definition of drm_debugfs_crtc_crc_add to drm_internal.h

v8:
    - Call debugfs_remove_recursive when we fail to create the minor
      device

v9:
    - Register the debugfs directory for a crtc from
      drm_crtc_register_all()

v10:
    - Don't let debugfs failures interrupt CRTC registration (Emil
      Velikov)

v11:
    - Remove extra brace that broke compilation. Sorry!

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475767268-14379-3-git-send-email-tomeu.vizoso@collabora.com

drm/fb-helper: reject any changes to the fbdev

The current fbdev emulation does not allow to push back changes in
width, height or depth to KMS, hence reject any changes with an
error. This makes sure that fbdev ioctl's fail properly and user
space does not assume that changes succeeded.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161011231504.17688-1-stefan@agner.ch

drm/edid: Use block local to refer to the block

Now that we have the name "block" free once more, we can use it to point
to the start of a block within the edid.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161017083514.21772-2-chris@chris-wilson.co.uk

drm/edid: Rename local variable block to edid

The "block" variable points to the entire edid, not individual blocks
despite it being named such.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161017083514.21772-1-chris@chris-wilson.co.uk

drm: Add and handle new aspect ratios in DRM layer

HDMI 2.0/CEA-861-F introduces two new aspect ratios:
- 64:27
- 256:135

This patch:
-  Adds new DRM flags for to represent these new aspect ratios.
-  Adds new cases to handle these aspect ratios while converting
from user->kernel mode or vise versa.

V2: Rebase
V3: Align macro for DRM_MODE_PICTURE_ASPECT_256_135 (Jim Bride)
V4: Added r-b from Jose.

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476705880-15600-5-git-send-email-shashank.sharma@intel.com

video: Add new aspect ratios for HDMI 2.0

HDMI 2.0/CEA-861-F introduces two new aspect ratios:
- 64:27
- 256:135

This patch adds enumeration for the new aspect ratios
in the existing aspect ratio list.

V2: rebase
V3: rebase
V4: Added r-b from Jose, Ack by Tomi

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476705880-15600-4-git-send-email-shashank.sharma@intel.com

drm: Add aspect ratio parsing in DRM layer

Current DRM layer functions don't parse aspect ratio information
while converting a user mode->kernel mode or vice versa. This
causes modeset to pick mode with wrong aspect ratio, eventually
causing failures in HDMI compliance test cases, due to wrong VIC.

This patch adds aspect ratio information in DRM's mode conversion
and mode comparision functions, to make sure kernel picks mode
with right aspect ratio (as per the VIC).

V2: Addressed review comments from Sean:
- Fix spellings/typo
- No need to handle aspect ratio none
- Add a break, for default case too
V3: Rebase
V4: Added r-b from Jose

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Lin, Jia <lin.a.jia@intel.com>
Signed-off-by: Akashdeep Sharma <akashdeep.sharma@intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476705880-15600-3-git-send-email-shashank.sharma@intel.com

drm: add picture aspect ratio flags

This patch adds drm flag bits for aspect ratio information

Currently drm flag bits don't have field for mode's picture
aspect ratio. This field will help the driver to pick mode with
right aspect ratio, and help in setting right VIC field in avi
infoframes.

V2: Addressed review comments from Sean
- Changed PAR-> PIC_AR
V3: Rebase
V3: Added r-b by Jose

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476705880-15600-2-git-send-email-shashank.sharma@intel.com

drivers/gpu/vga: allocate vga_arb_write() buffer on stack

Size of kmalloc() in vga_arb_write() is controlled by user.
Too large kmalloc() size triggers WARNING message on console.
Allocate the buffer on stack to avoid the WARNING.
The string must be small (e.g "target PCI:domain:bus:dev.fn").

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: syzkaller@googlegroups.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476451342-146510-1-git-send-email-dvyukov@google.com

drm: Add reference counting to drm_atomic_state

drm_atomic_state has a complicated single owner model that tracks the
single reference from allocation through to destruction on another
thread - or perhaps on a local error path. We can simplify this tracking
by using reference counting (at a cost of a few more atomics). This is
even more beneficial when the lifetime of the state becomes more
convoluted than being passed to a single worker thread for the commit.

v2: Double check !intel atomic_commit functions for missing gets
v3: Update kerneldocs

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161014121833.439-27-chris@chris-wilson.co.uk

drm/crtc: constify drm_crtc_mask parameter

Now that drm_crtc_index takes a const, the same can be done for drm_crtc_mask.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/6e32d013-6fee-34ad-f8d2-59139f3dc4c1@linux.intel.com

drm: atomic: Clarify documentation around drm_atomic_crtc_needs_modeset

Add some additional comments to more explicitly describe the meaning and
usage of the three CRTC modeset detection booleans: mode_changed,
connectors_changed and active_changed.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476352028-16701-1-git-send-email-brian.starkey@arm.com

drm/savage: dereferencing an error pointer

A recent cleanup changed the kmalloc() + copy_from_user() to
memdup_user() but the error handling wasn't updated so we might call
kfree(-EFAULT) and crash.

Fixes: a6e3918bcdb1 ('GPU-DRM-Savage: Use memdup_user() rather than duplicating')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161012062227.GU12841@mwanda

drm/gma500: add comments for new parameters

Added comments for new parameters.

Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476238699-25820-1-git-send-email-jiang.biao2@zte.com.cn

drm/gma500: remove useless comment

Remove useless comment in framebuffer.c.

Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476165825-12137-1-git-send-email-jiang.biao2@zte.com.cn

gpu: drm: gma500: Use vma_pages()

Replace explicit computation of vma page count by a call to
vma_pages()

Signed-off-by: Shyam Saini <mayhs11saini@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476054436-9378-1-git-send-email-mayhs11saini@gmail.com

dma-buf: Restart reservation_object_test_signaled_rcu() after writes

In order to be completely generic, we have to double check the read
seqlock after acquiring a reference to the fence. If the driver is
allocating fences from a SLAB_DESTROY_BY_RCU, or similar freelist, then
within an RCU grace period a fence may be freed and reallocated. The RCU
read side critical section does not prevent this reallocation, instead
we have to inspect the reservation's seqlock to double check if the
fences have been reassigned as we were acquiring our reference.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160829070834.22296-9-chris@chris-wilson.co.uk

dma-buf: Restart reservation_object_wait_timeout_rcu() after writes

In order to be completely generic, we have to double check the read
seqlock after acquiring a reference to the fence. If the driver is
allocating fences from a SLAB_DESTROY_BY_RCU, or similar freelist, then
within an RCU grace period a fence may be freed and reallocated. The RCU
read side critical section does not prevent this reallocation, instead
we have to inspect the reservation's seqlock to double check if the
fences have been reassigned as we were acquiring our reference.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160829070834.22296-8-chris@chris-wilson.co.uk

dma-buf: Restart reservation_object_get_fences_rcu() after writes

In order to be completely generic, we have to double check the read
seqlock after acquiring a reference to the fence. If the driver is
allocating fences from a SLAB_DESTROY_BY_RCU, or similar freelist, then
within an RCU grace period a fence may be freed and reallocated. The RCU
read side critical section does not prevent this reallocation, instead
we have to inspect the reservation's seqlock to double check if the
fences have been reassigned as we were acquiring our reference.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160829070834.22296-7-chris@chris-wilson.co.uk

dma-buf: Introduce fence_get_rcu_safe()

This variant of fence_get_rcu() takes an RCU protected pointer to a
fence and carefully returns a reference to the fence ensuring that it is
not reallocated as it does. This is required when mixing fences and
SLAB_DESTROY_BY_RCU - although it serves a more pedagogical function atm

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160829070834.22296-6-chris@chris-wilson.co.uk

drm/vmwgfx: Remove call to reservation_object_test_signaled_rcu before wait

Since fence_wait_timeout_reservation_object_wait_timeout_rcu() with a
timeout of 0 becomes reservation_object_test_signaled_rcu(), we do not
need to handle such conversion in the caller. The only challenge are
those callers that wish to differentiate the error code between the
nonblocking busy check and potentially blocking wait.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160829070834.22296-5-chris@chris-wilson.co.uk

drm/nouveau: Remove call to reservation_object_test_signaled_rcu before wait

Since fence_wait_timeout_reservation_object_wait_timeout_rcu() with a
timeout of 0 becomes reservation_object_test_signaled_rcu(), we do not
need to handle such conversion in the caller. The only challenge are
those callers that wish to differentiate the error code between the
nonblocking busy check and potentially blocking wait.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160829070834.22296-4-chris@chris-wilson.co.uk

drm/etnaviv: Remove manual call to reservation_object_test_signaled_rcu before wait

Since fence_wait_timeout_reservation_object_wait_timeout_rcu() with a
timeout of 0 becomes reservation_object_test_signaled_rcu(), we do not
need to handle such conversion in the caller. The only challenge are
those callers that wish to differentiate the error code between the
nonblocking busy check and potentially blocking wait.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160829070834.22296-2-chris@chris-wilson.co.uk

drm/amdgpu: Remove call to reservation_object_test_signaled_rcu before wait

Since fence_wait_timeout_reservation_object_wait_timeout_rcu() with a
timeout of 0 becomes reservation_object_test_signaled_rcu(), we do not
need to handle such conversion in the caller. The only challenge are
those callers that wish to differentiate the error code between the
nonblocking busy check and potentially blocking wait.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160829070834.22296-1-chris@chris-wilson.co.uk

drm/crtc: constify drm_crtc_index parameter

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476113170-13816-1-git-send-email-jani.nikula@intel.com

drm: use the right function name in documentation

There is no late_unregister(), it looks like the comment meant
late_register(). Also fix a typo while at it.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476032820-3275-1-git-send-email-notasas@gmail.com

drm: Release resources with a safer function

We should use 'ida_simple_remove()' instead of 'ida_remove()' when freeing
resources allocated with 'ida_simple_get()'.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475825261-7735-1-git-send-email-christophe.jaillet@wanadoo.fr

drm: Fix up kerneldoc for new drm_gem_dmabuf_export()

I hit send before completing a make htmldoc, and lo I forgot to fix up
the cut'n'paste.

Fixes: a4fce9cb782a ("drm/prime: Take a ref on the drm_dev when exporting...")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161005174056.29869-1-chris@chris-wilson.co.uk

drm/bridge: Drop drm_connector_unregister and call drm_connector_cleanup directly

Drop unneeded drm_connector_unregister() and remove the unnecessary
wrapper functions around drm_connector_cleanup().

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161005143133.5549-1-marex@denx.de

drm/fb-helper: fix sphinx markup for DRM_FB_HELPER_DEFAULT_OPS

Fix invalid sphinx markup in the comment for the newly added
DRM_FB_HELPER_DEFAULT_OPS.

Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475692454-11543-1-git-send-email-contact@stefanchrist.eu

drm/bridge: Add RGB to VGA bridge support

Some boards have an entirely passive RGB to VGA bridge, based on DACs
implemented by resistor ladders.

Those might or might not have an i2c bus routed to the VGA connector in
order to access the screen EDIDs.

Add a bridge that doesn't do anything but expose the modes available on the
screen, either based on the EDIDs if available, or based on the XGA
standards.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160930143709.1388-3-maxime.ripard@free-electrons.com

drm/prime: Take a ref on the drm_dev when exporting a dma_buf

dma_buf may live a long time, longer than the last direct user of the
driver. We already hold a reference to the owner module (that prevents
the object code from disappearing), but there is no reference to the
drm_dev - so the pointers to the driver backend themselves may vanish.

v2: Resist temptation to fix the bug in armada_gem.c not setting the
correct flags on the exported dma-buf (it should pass the flags through
and not be arbitrarily setting O_RDWR).

Use a common wrapper for exporting the dmabuf and acquiring the
reference to the drm_device.

Testcase: igt/vgem_basic/unload
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Tested-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161005122145.1507-2-chris@chris-wilson.co.uk

drm/prime: Pass the right module owner through to dma_buf_export()

dma_buf_export() adds a reference to the owning module to the dmabuf (to
prevent the driver from being unloaded whilst a third party still refers
to the dmabuf). However, drm_gem_prime_export() was passing its own
THIS_MODULE (i.e. drm.ko) rather than the driver. Extract the right
owner from the device->fops instead.

v2: Use C99 initializers to zero out unset elements of
dma_buf_export_info
v3: Extract the right module from dev->fops.

Testcase: igt/vgem_basic/unload
Reported-by: Petri Latvala <petri.latvala@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161005122145.1507-1-chris@chris-wilson.co.uk

drm/bridge: Call drm_connector_cleanup directly

Remove the unnecessary wrapper functions around drm_connector_cleanup().

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004222331.7200-1-marex@denx.de

drm: simple_kms_helper: Add prepare_fb and cleanup_fb hooks

Add .prepare_fb and .cleanup_fb plane hooks into the drm_simple_kms.
These can be used by drivers to call ie. the drm_fb_cma_setup_fence()
helper.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161002170124.6099-1-marex@denx.de

drm: Release resources with a safer function

We should use 'ida_simple_remove()' instead of 'ida_remove()' when freeing
resources allocated with 'ida_simple_get()'.

This as been spotted with the following coccinelle script which tries to
detect missing 'ida_simple_remove()' call in error handling paths.

///////////////
@@
expression x;
identifier l;
@@

*   x = ida_simple_get(...);
    ...
    if (...) {
    ...
    }
    ...
    if (...) {
       ...
       goto l;
    }
    ...
*   l: ... when != ida_simple_remove(...);

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475388082-12656-1-git-send-email-christophe.jaillet@wanadoo.fr

drm/rockchip: analogix_dp: Refuse to enable PSR if panel doesn't support it

There's no point in enabling PSR when the panel doesn't support it.

This also avoids a problem when PSR gets enabled when a CRTC is being
disabled, because sometimes in that situation the DSP_HOLD_VALID_INTR
interrupt on which we wait will never arrive. This was observed on
RK3288 with a panel without PSR (veyron-jaq Chromebook).

It's very easy to reproduce by running the kms_rmfb test in IGT a few
times.

Cc: Yakir Yang <ykk@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474639600-30090-2-git-send-email-tomeu.vizoso@collabora.com

drm/bridge: analogix_dp: Add analogix_dp_psr_supported

So users know whether PSR should be enabled or not.

Cc: Yakir Yang <ykk@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474639600-30090-1-git-send-email-tomeu.vizoso@collabora.com

drm/fb-helper: add DRM_FB_HELPER_DEFAULT_OPS for fb_ops

The define DRM_FB_HELPER_DEFAULT_OPS provides the drm_fb_helper default
implementations for functions in struct fb_ops. A drm driver can use it
like:

    static struct fb_ops drm_fbdev_cma_ops = {
        .owner          = THIS_MODULE,
        DRM_FB_HELPER_DEFAULT_OPS,
        /* driver specific implementations */
    };

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475182136-15191-2-git-send-email-contact@stefanchrist.eu

drm: Document caveats around atomic event handling

It's not that obvious how a driver can all race the atomic commit with
handling the completion event. And there's unfortunately a pile of
drivers with rather bad event handling which misdirect people into the
wrong direction.

Try to remedy this by documenting everything better.

v2: Type fixes Alex spotted.

v3: More typos Alex spotted.

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475229896-6047-1-git-send-email-daniel.vetter@ffwll.ch

uapi: add missing install of sync_file.h

As part of the sync framework destaging, the sync_file.h header
was moved, but an entry was not added on Kbuild to install it.
This patch resolves this omission so that "make headers_install"
installs this header.

Fixes: 460bfc41fd52 ("dma-buf/sync_file: de-stage sync_file headers")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Emilio López <emilio.lopez@collabora.co.uk>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160927143142.8975-1-emilio.lopez@collabora.co.uk

drm: Simplify drm_printk to reduce object size quite a bit

Remove function name and special " *ERROR*" from argument list

$ size drivers/gpu/drm/built-in.o* (x86-32 defconfig, most drm selected)
   text    data     bss     dec     hex filename
5635366  182579   14328 5832273  58fe51 drivers/gpu/drm/built-in.o.new
5779552  182579   14328 5976459  5b318b drivers/gpu/drm/built-in.o.old

Using "%ps", __builtin_return_address(0) is the same as "%s", __func__
except for static inlines, but it's more or less the same output.

Miscellanea:

o Convert args... to ##__VA_ARGS__
o The equivalent DRM_DEV_<FOO> macros are rarely used and not
  worth conversion

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/01f976d5ab93c985756fc1b2e83656fb0a2a28c8.1474856262.git.joe@perches.com

drm/i915: Account for sink max TMDS clock when checking the port clock

It's perfectly legal for the sink to support 12bpc only for
some lower resolution modes, while the higher resolution modes
can only be used with 8bpc. So let's take the sink's max TMDS clock
into account before we go and decide that a particular mode can
be used with 12bpc.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-11-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Replace a bunch of connector->base.display_info with a local variable

Reduce the eyesore with a local variable.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-10-git-send-email-ville.syrjala@linux.intel.com

drm/edid: Move dvi_dual/max_tmds_clock parsing out from drm_edid_to_eld()

drm_edid_to_eld() is just mean to cook up the ELD for the audio driver,
so having it parse non-audio related stuff seems just wrong, and
potentially could lead to that information not being even filled out
if the function doesn't even get called. Let's move that stuff to the
place where we parse the color formats and whatnot from the CEA ext
block.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-9-git-send-email-ville.syrjala@linux.intel.com

drm/edid: Clear the old cea_rev when there's no CEA extension in the new EDID

It's not a good idea to leave stale cea_rev in the drm_display_info. The
current EDID might not even have a CEA ext block in which case we'd end
up leaving the stale value in place.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-8-git-send-email-ville.syrjala@linux.intel.com

drm/edid: Reduce the number of times we parse the CEA extension block

Instead of parsing parts of the CEA extension block in two places
to determine supported color formats and whatnot, let's just
consolidate it to one function. This also makes it possible to neatly
flatten drm_assign_hdmi_deep_color_info().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-7-git-send-email-ville.syrjala@linux.intel.com

drm/edid: Don't pass around drm_display_info needlessly

We already pass the connector to drm_add_display_info() and
drm_assign_hdmi_deep_color_info(), so passing the
connector->display_info also is pointless.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-6-git-send-email-ville.syrjala@linux.intel.com

drm/edid: Move dvi_dual/max_tmds_clock to drm_display_info

We have the drm_display_info for storing information about the sink, so
let's move dvi_dual and max_tmds_clock in there.

v2: Deal with superfluous code shuffling
    Document dvi_dual and max_tmds_clock too

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-5-git-send-email-ville.syrjala@linux.intel.com

drm/edid: Make max_tmds_clock kHz instead of MHz

We generally store clocks in kHz, so let's do that for the
HDMI max TMDS clock value as well. Less surpising.

v2: Deal with superfluous code shuffling

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-4-git-send-email-ville.syrjala@linux.intel.com

drm/edid: Clear old dvi_dual/max_tmds_clock before parsing the new EDID

Clear out old max_tmds_clock and dvi_dual information (possibly from a
previous EDID) before parsing the current EDID. Tne current EDID might
not even have these in its HDMI VSDB, which would mean that we'd leave
the old stale values in place.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-3-git-send-email-ville.syrjala@linux.intel.com

drm/edid: Clear old audio latency values before parsing the new EDID

Clear out stale audio latency information (potentially from a previous
EDID) before constructing the ELD from the EDID.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-2-git-send-email-ville.syrjala@linux.intel.com

drm: Convert prime dma-buf <-> handle to rbtree

Currently we use a linear walk to lookup a handle and return a dma-buf,
and vice versa. A long overdue TODO task is to convert that to a
hashtable. Since the initial implementation of dma-buf/prime, we now
have resizeable hashtables we can use (and now a future task is to RCU
enable the lookup!). However, this patch opts to use an rbtree instead
to provide O(lgN) lookups (and insertion, deletion). rbtrees were chosen
over using the RCU backed resizable hashtable to firstly avoid the
reallocations (rbtrees can be embedded entirely within the parent
struct) and to favour simpler code with predictable worst case
behaviour. In simple testing, the difference between using the constant
lookup and insertion of the rhashtable and the rbtree was less than 10%
of the wall time (igt/benchmarks/prime_lookup) - both are dramatic
improvements over the existing linear lists.

v2: Favour rbtree over rhashtable

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94631
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160926204414.23222-1-chris@chris-wilson.co.uk

drm/mediatek: mark symbols static where possible

We get 4 warnings when building kernel with W=1:
drivers/gpu/drm/mediatek/mtk_hdmi.c:1089:6: warning: no previous prototype for 'mtk_hdmi_audio_enable' [-Wmissing-prototypes]
drivers/gpu/drm/mediatek/mtk_hdmi.c:1095:6: warning: no previous prototype for 'mtk_hdmi_audio_disable' [-Wmissing-prototypes]
drivers/gpu/drm/mediatek/mtk_hdmi.c:1101:5: warning: no previous prototype for 'mtk_hdmi_audio_set_param' [-Wmissing-prototypes]
drivers/gpu/drm/mediatek/mtk_hdmi.c:1627:5: warning: no previous prototype for 'mtk_hdmi_audio_digital_mute' [-Wmissing-prototypes]

In fact, both functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks both functions with 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
[seanpaul fixed checkpatch warning for argument alignment]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474789109-22010-2-git-send-email-baoyou.xie@linaro.org

drm/rockchip: mark symbols static where possible

We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/rockchip/rockchip_drm_drv.c:309:6: warning: no previous prototype for 'rockchip_drm_fb_suspend' [-Wmissing-prototypes]
drivers/gpu/drm/rockchip/rockchip_drm_drv.c:318:6: warning: no previous prototype for 'rockchip_drm_fb_resume' [-Wmissing-prototypes]

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474789388-3284-1-git-send-email-baoyou.xie@linaro.org

drm/rockchip: add missing header dependencies

We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c:130:5: warning: no previous prototype for 'rockchip_drm_fbdev_init' [-Wmissing-prototypes]
drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c:173:6: warning: no previous prototype for 'rockchip_drm_fbdev_fini' [-Wmissing-prototypes]

In fact, these functions are declared
in drivers/gpu/drm/rockchip/rockchip_drm_fbdev.h,
so this patch adds missing header dependencies.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474789109-22010-1-git-send-email-baoyou.xie@linaro.org

drm: virtio: reinstate drm_virtio_set_busid()

Before commit a325725633c2 ("drm: Lobotomize set_busid nonsense for !pci
drivers"), several DRM drivers for platform devices used to expose an
explicit "drm_driver.set_busid" callback, invariably backed by
drm_platform_set_busid().

Commit a325725633c2 removed drm_platform_set_busid(), along with the
referring .set_busid field initializations. This was justified because
interchangeable functionality had been implemented in drm_dev_alloc() /
drm_dev_init(), which DRM_IOCTL_SET_VERSION would rely on going forward.

However, commit a325725633c2 also removed drm_virtio_set_busid(), for
which the same consolidation was not appropriate: this .set_busid callback
had been implemented with drm_pci_set_busid(), and not
drm_platform_set_busid(). The error regressed Xorg/xserver on QEMU's
"virtio-vga" card; the drmGetBusid() function from libdrm would no longer
return stable PCI identifiers like "pci:0000:00:02.0", but rather unstable
platform ones like "virtio0".

Reinstate drm_virtio_set_busid() with judicious use of

  git checkout -p a325725633c2^ -- drivers/gpu/drm/virtio

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joachim Frieben <jfrieben@hotmail.com>
Cc: stable@vger.kernel.org # v4.8
Reported-by: Joachim Frieben <jfrieben@hotmail.com>
Fixes: a325725633c26aa66ab940f762a6b0778edf76c0
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1366842
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Undo damage to page_flip_ioctl

I screwed up rebasing of my patch in

commit 43968d7b806d7a7e021261294c583a216fddf0e5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Sep 21 10:59:24 2016 +0200

    drm: Extract drm_plane.[hc]

which meant on error paths drm_crtc_vblank_put could be called without
a get, leading to an underrun of the refcount.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98020
Reported-and-tested-by: Andy Furniss <adf.lists@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161003082827.11586-1-daniel.vetter@ffwll.ch
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Restore lost drm_framebuffer_unreference in drm_mode_page_flip_ioctl

Commit 43968d7b806d ("drm: Extract drm_plane.[hc]") was not the simple
cut'n'paste we presumed, somehow it introduced a leak of the page flip
target's framebuffer.

Fixes: 43968d7b806d ("drm: Extract drm_plane.[hc]")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160928222500.11827-1-chris@chris-wilson.co.uk
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

This pull request includes,
    - Code refactoring on HDMI DDC and PHY.
    - Regression fixup on deadlock issue with G2D pm integration.
    - Fixup on page fault issue with wait_for_vblank mechianism specific to Exynos drm.
    - And some cleanups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: g2d: simplify g2d_free_runqueue_node()
  drm/exynos: g2d: use autosuspend mode for PM runtime
  drm/exynos: g2d: wait for engine to finish
  drm/exynos: g2d: remove runqueue nodes in g2d_{close,remove}()
  drm/exynos: g2d: move PM management to runqueue worker
  Revert "drm/exynos: g2d: fix system and runtime pm integration"
  drm/exynos: use drm core to handle page-flip event
  drm/exynos: mark exynos_dp_crtc_clock_enable() static
  drm/exynos/fimd: add clock rate checking
  drm/exynos: fix pending update handling
  drm/exynos/vidi: use timer for vblanks instead of sleeping worker
  drm/exynos: g2d: beautify probing message
  drm/exynos: mixer: simplify loop in vp_win_reset()
  drm/exynos: mixer: convert booleans to flags in mixer context
  gpu: drm: exynos_hdmi: Remove duplicate initialization of regulator bulk consumer
  gpu: drm: exynos_hdmi: Move PHY logic into single function
  gpu: drm: exynos_hdmi: Move DDC logic into single function

drm/exynos: g2d: simplify g2d_free_runqueue_node()

The function is never called with zero 'runqueue_node'.

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: g2d: use autosuspend mode for PM runtime

The runqueue worker currently issues a get() when a new
node is processed, and a put() once a node is completed.

The corresponding suspend and resume calls currently only
do clock gating, but with the upcoming introduction of
IOMMU runpm also the corresponding IOMMU domain gets
enabled (for get()) and disabled (for put()). This
introduces performance regressions with we mitigate here.

Switch PM runtime to autosuspend, such that clock gating
and IOMMU control only happens when the engine is idle for
a 'long' time.

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: g2d: wait for engine to finish

While the engine works on a runqueue node it does memory access to
the buffers associated with that node.
Make sure that the engine is idle when g2d_close() and/or
g2d_remove() are called, i.e. buffer associated with the process (for
g2d_close()), or all buffers (for g2d_remove()) can be safely be
unmapped.

We have to take into account that the engine might be in an undefined
state, i.e. it hangs and doesn't become idle. In this case, we issue
a hardware reset to return the hardware and the driver context into a
proper state.

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: g2d: remove runqueue nodes in g2d_{close,remove}()

The driver might be closed (and/or removed) while there are still
nodes queued for processing.
Make sure to remove these nodes, which means all of them in
the case of g2d_remove() and only those belonging to the
corresponding process in g2d_close().

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: g2d: move PM management to runqueue worker

Do all pm_runtime_{get,put}() calls in the runqueue worker.
Also keep track of the engine's idle/busy state.

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Revert "drm/exynos: g2d: fix system and runtime pm integration"

This reverts commit b05984e21a7e000bf5074ace00d7a574944b2c16.

The change, i.e. merging the sleep and runpm operations, produces
a deadlock situation:
(1) exynos_g2d_exec_ioctl() prepares a runqueue node and
    calls g2d_exec_runqueue()
(2) g2d_exec_runqueue() calls g2d_dma_start() which gets
    runtime PM sync
(3) runtime PM core calls g2d_runtime_resume()
(4) g2d_runtime_resume() calls g2d_exec_runqueue(), which
    loops back to (2)

Due to mutexes that are in place, a deadlock situation is created.

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: use drm core to handle page-flip event

Exynos DRM framework handled page-flip event with custom code.
The patch replaces it with drm-core vblank queue.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>