FRV: Miscellaneous fixes

Miscellaneous fixes to bring FRV up to date:

 (1) Copy the new syscall numbers from i386 to asm-frv/unistd.h and fill out
     the syscall table in entry.S too.

 (2) Mark __frv_uart0 and __frv_uart1 __pminitdata rather than __initdata so
     that determine_clocks() can access them when CONFIG_PM=y.

 (3) Make arch/frv/mm/elf-fdpic.c include asm/mman.h so that MAP_FIXED is
     available (fixes commit 2fd3bebaad9da3b3b99c46a3389099424bf7ee35).

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

smaps: only define clear_refs for CONFIG_MMU

/proc/pid/clear_refs is only defined in the CONFIG_MMU case, so make sure we
don't have any references to clear_refs_smap() in generic procfs code.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix unnecesary meminit

This is to fix unnecessary __meminit definition.  These are exported for
kernel modules.

I compiled on ia64/x86-64 with memory hotplug on/off.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge /pub/scm/linux/kernel/git/herbert/crypto-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] cryptomgr: Fix use after free

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Optimize fault kprobe handling just like powerpc.
  [SPARC]: Wire up utimensat syscall.
  [SPARC64]: Fix request_irq() ignored result warnings in PCI controller code.
  [SPARC64]: Kill asm-sparc64/pbm.h
  [ATYFB]: Fix sparc includes.
  [QLA2XXX]: Fix build on sparc.
  [SPARC64]: Removal of trivial pci_controller_info uses.
  [SPARC64]: Move index info pci_pbm_info.
  [SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info.
  [SPARC64]: Move pci_ops into pci_pbm_info.
  [SPARC64] SBUS: Error interrupt registry cleanups.
  [SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's
  [SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX.
  [SPARC64] PCI: Use common routine to fetch PBM properties.

Merge /pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (58 commits)
  [SCSI] zfcp: clear boxed flag on unit reopen.
  [SCSI] zfcp: clear adapter failed flag if an fsf request times out.
  [SCSI] zfcp: rework request ID management.
  [SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI
  [SCSI] zfcp: Locking for req_no and req_seq_no
  [SCSI] zfcp: print S_ID and D_ID with 3 bytes
  [SCSI] ipr: Use PCI-E reset API for new ipr adapter
  [SCSI] qla2xxx: Update version number to 8.01.07-k7.
  [SCSI] qla2xxx: Add MSI support.
  [SCSI] qla2xxx: Correct pci_set_msi() usage semantics.
  [SCSI] qla2xxx: Attempt to stop firmware only if it had been previously executed.
  [SCSI] qla2xxx: Honor NVRAM port-down-retry-count settings.
  [SCSI] qla2xxx: Error-out during probe() if we're unable to complete HBA initialization.
  [SCSI] zfcp: Stop system after memory corruption
  [SCSI] mesh: cleanup variable usage in interrupt handler
  [SCSI] megaraid: replace yield() with cond_resched()
  [SCSI] megaraid: fix warnings when CONFIG_PROC_FS=n
  [SCSI] aacraid: correct SUN products to README
  [SCSI] aacraid: superfluous adapter reset for IBM 8 series ServeRAID controllers
  [SCSI] aacraid: kexec fix (reset interrupt handler)
  ...

Revert "fbdev: ignore VESA modes if framebuffer is disabled"

This reverts commit 464bdd33e9baad9806c7adbd8dfc37081a55f27e.

Peter Anvin correctly points out that VESA modes have nothing to do with
frame buffers per se - they are often just regular extended text modes.
Disabling them just because we don't have frame buffer support is very
wrong.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Antonino A. Daplas <adaplas@gmail.com>,
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove suid/sgid bits on [f]truncate()

.. to match what we do on write().  This way, people who write to files
by using [f]truncate + writable mmap have the same semantics as if they
were using the write() family of system calls.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[CRYPTO] cryptomgr: Fix use after free

By the time kthread_run returns the param may have already been freed
so writing the returned thread_struct pointer to param is wrong.

In fact, we don't need it in param anyway so this patch simply puts it
on the stack.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

[SPARC64]: Optimize fault kprobe handling just like powerpc.

And eliminate DIE_GPF while we're at it.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC]: Wire up utimensat syscall.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Fix request_irq() ignored result warnings in PCI controller code.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Kill asm-sparc64/pbm.h

Everything it contains can be hidden in pci_impl.h

Signed-off-by: David S. Miller <davem@davemloft.net>

[ATYFB]: Fix sparc includes.

No need to use asm/pbm.h here.

Signed-off-by: David S. Miller <davem@davemloft.net>

[QLA2XXX]: Fix build on sparc.

We now use pci_device_to_OF_node() to get properties
and of_get_property() returns const pointers.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Removal of trivial pci_controller_info uses.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Move index info pci_pbm_info.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Move pci_ops into pci_pbm_info.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64] SBUS: Error interrupt registry cleanups.

Do not use IRQF_SHARED, these interrupt numbers should all
be unique.

Also use name strings without spaces in them just like
PCI controller drivers do, for consistency.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's

The idea is to move more and more things into the pbm,
with the eventual goal of eliminating the pci_controller_info
entirely as there really isn't any need for it.

This stage of the transformations requires some reworking of
the PCI error interrupt handling.

It might be tricky to get rid of the pci_controller_info parenting for
a few reasons:

1) When we get an uncorrectable or correctable error we want
   to interrogate the IOMMU and streaming cache of both
   PBMs for error status.  These errors come from the UPA
   front-end which is shared between the two PBM PCI bus
   segments.

   Historically speaking this is why I choose the datastructure
   hierarchy of pci_controller_info-->pci_pbm_info

2) The probing does a portid/devhandle match to look for the
   'other' pbm, but this is entirely an artifact and can be
   eliminated trivially.

What we could do to solve #1 is to have a "buddy" pointer from one pbm
to another.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX.

They are totally unused.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64] PCI: Use common routine to fetch PBM properties.

Namely bus-range and ino-bitmap.

This allows us also to eliminate pci_controller_info's
pci_{first,last}_busno fields as only the pbm ones are
used now.

Signed-off-by: David S. Miller <davem@davemloft.net>

mmc: use lock instead of claim in debug check

As mmc_detect_change() can be called from irq context, using
claim (which can sleep) is inherently unsafe. Use the host
spinlock instead, which also is faster.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

mmc: Use menuconfig objects

Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

disable socket power in adapter driver instead of media one

Socket power must be fully controlled by adapter driver. This also prevents
unnecessary power-off of the socket when media driver is unloaded, yet
media remains in the socket.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (32 commits)
  Use menuconfig objects - hwmon
  hwmon/smsc47b397: Use dynamic sysfs callbacks
  hwmon/smsc47b397: Convert to a platform driver
  hwmon/w83781d: Deprecate W83627HF support
  hwmon/w83781d: Use dynamic sysfs callbacks
  hwmon/w83781d: Be less i2c_client-centric
  hwmon/w83781d: Clean up conversion macros
  hwmon/w83781d: No longer use i2c-isa
  hwmon/ams: Do not print error on systems without apple motion sensor
  hwmon/ams: Fix I2C read retry logic
  hwmon: New AD7416, AD7417 and AD7418 driver
  hwmon/coretemp: Add documentation
  hwmon: New coretemp driver
  i386: Use functions from library in msr driver
  i386: Add safe variants of rdmsr_on_cpu and wrmsr_on_cpu
  hwmon/lm75: Use dynamic sysfs callbacks
  hwmon/lm78: Use dynamic sysfs callbacks
  hwmon/lm78: Be less i2c_client-centric
  hwmon/lm78: No longer use i2c-isa
  hwmon: New max6650 driver
  ...

Fix sunrpc warning noise

Commit c5a4dd8b7c15927a8fbff83171b57cad675a79b9 introduced the following
compiler warnings:

net/sunrpc/sched.c:766: warning: format '%u' expects type 'unsigned int', but argument 3 has type 'size_t'
net/sunrpc/sched.c:785: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'size_t'

  - Use %zu to format size_t
  - Kill 2 useless casts

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://oss.sgi.com:8090/xfs/xfs-2.6

* git://oss.sgi.com:8090/xfs/xfs-2.6:
  [XFS] Add lockdep support for XFS
  [XFS] Fix race in xfs_write() b/w dmapi callout and direct I/O checks.
  [XFS] Get rid of redundant "required" in msg.
  [XFS] Export via a function xfs_buftarg_list for use by kdb/xfsidbg.
  [XFS] Remove unused ilen variable and references.
  [XFS] Fix to prevent the notorious 'NULL files' problem after a crash.
  [XFS] Fix race condition in xfs_write().
  [XFS] Fix uquota and oquota enforcement problems.
  [XFS] propogate return codes from flush routines
  [XFS] Fix quotaon syscall failures for group enforcement requests.
  [XFS] Invalidate quotacheck when mounting without a quota type.
  [XFS] reducing the number of random number functions.
  [XFS] remove more misc. unused args
  [XFS] the "aendp" arg to xfs_dir2_data_freescan is always NULL, remove it.
  [XFS] The last argument "lsn" of xfs_trans_commit() is always called with

Merge branch 'reset-seq' of /linux/kernel/git/jgarzik/libata-dev

* 'reset-seq' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata reset-seq] build and merge fixes
  libata: reimplement reset sequencing
  libata: improve ata_std_prereset()
  libata: improve 0xff status handling
  libata: add deadline support to prereset and reset methods

Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits)
  [netdrvr] atl1: fix build
  pasemi_mac: Use local-mac-address instead of mac-address if available
  pasemi_mac: PHY support
  pasemi_mac: Add msglevel support and "debug" module param
  pasemi_mac: Logic cleanup / rx performance improvements
  pasemi_mac: Minor cleanup / define fixes
  pasemi_mac: Add SKB reuse / copy-break
  pasemi_mac: Timer and interrupt fixes
  pasemi_mac: Abstract and fix up interrupt restart routines
  pasemi_mac: Move the IRQ mapping from the PCI layer to the driver
  tc35815: Remove unnecessary skb->dev assignment
  drivers/net/dm9000: Convert to generic boolean
  AT91RM9200 Ethernet: Fix multicast addressing
  AT91RM9200 Ethernet: Support additional PHYs
  PCMCIA-NETDEV : xirc2ps_cs: bugfix of multicast code
  sky2: re-enable 88E8056 for most motherboards
  MIPS: Drop unnecessary CONFIG_ISA from RBTX49XX
  ne: MIPS: Use platform_driver for ne on RBTX49XX
  ne: Add NEEDS_PORTLIST to control ISA auto-probe
  ne: Misc fixes for platform driver.
  ...

Fix conflict in drivers/net/pasemi_mac.c (get_property() got renamed to
of_get_property()) manually.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'drm-patches' of /linux/kernel/git/airlied/drm-2.6

* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6:
  via: Make sure we flush write-combining using a follow-up read.
  via: Try to improve command-buffer chaining.
  drm: remove old taskqueue remnant
  drm: rename badly named define and cleanup ioctl code spacing
  radeon: Don't mess up page flipping when a file descriptor is closed.
  drm/radeon: upgrade to 1.27 - make PCI GART more flexible

Merge /pub/scm/linux/kernel/git/dtor/input

* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input:
  Input: move USB miscellaneous devices under drivers/input/misc
  Input: move USB mice under drivers/input/mouse
  Input: move USB gamepads under drivers/input/joystick
  Input: move USB touchscreens under drivers/input/touchscreen
  Input: move USB tablets under drivers/input/tablet
  Input: i8042 - fix AUX port detection with some chips
  Input: aaed2000_kbd - convert to use polldev library
  Input: drivers/usb/input - usb_buffer_free() cleanup
  Input: synaptics - don't complain about failed resets
  Input: pull input.h into uinpit.h
  Input: drivers/usb/input - fix sparse warnings (signedness)
  Input: evdev - fix some sparse warnings (signedness, shadowing)
  Input: drivers/joystick - fix various sparse warnings
  Input: force feedback - make sure effect is present before playing

Merge branch 'master' of git://git./linux/kernel/git/paulus/powerpc

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (77 commits)
  [POWERPC] Abolish powerpc_flash_init()
  [POWERPC] Early serial debug support for PPC44x
  [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc
  [POWERPC] Add device tree for Ebony
  [POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for now
  [POWERPC] MPIC U3/U4 MSI backend
  [POWERPC] MPIC MSI allocator
  [POWERPC] Enable MSI mappings for MPIC
  [POWERPC] Tell Phyp we support MSI
  [POWERPC] RTAS MSI implementation
  [POWERPC] PowerPC MSI infrastructure
  [POWERPC] Rip out the existing powerpc msi stubs
  [POWERPC] Remove use of 4level-fixup.h for ppc32
  [POWERPC] Add powerpc PCI-E reset API implementation
  [POWERPC] Holly bootwrapper
  [POWERPC] Holly DTS
  [POWERPC] Holly defconfig
  [POWERPC] Add support for 750CL Holly board
  [POWERPC] Generalize tsi108 PCI setup
  [POWERPC] Generalize tsi108 PHY types
  ...

Fixed conflict in include/asm-powerpc/kdebug.h manually

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove unused variable in get_unmapped_area

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block

* 'for-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block:
  [PATCH] ll_rw_blk: fix missing bounce in blk_rq_map_kern()
  [PATCH] splice: always call into page_cache_readahead()
  [PATCH] splice(): fix interaction with readahead

Merge branch 'for-linus' of git://git./linux/kernel/git/shaggy/jfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  JFS: Fix race waking up jfsIO kernel thread
  JFS: use __set_current_state()
  Copy i_flags to jfs inode flags on write
  JFS: document uid, gid, and umask mount options in jfs.txt

sm501fb printk warning fixes

drivers/video/sm501fb.c: In function 'sm501fb_cursor':
drivers/video/sm501fb.c:992: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
drivers/video/sm501fb.c:992: warning: format '%08x' expects type 'unsigned int', but argument 4 has type 'long unsigned int'

Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

xilinxfb: xilinx framebuffer device driver

Add support for the video controller IP block included into Xilinx ML300 and
ML403 reference designs.

Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm2fb: fix of jumps in pm2fb_probe

This patch fixes incorrect targets of jumps when an error occurs in the
pm2fb_probe.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

skeletonfb: improvements

This patch adds a macro to register PCI ids table and corrects type of
xxxfb_fix variable to avoid modpost warnings.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm2fb: removal of pm2fb_par fields

This patch removes two redundant fields in the pm2fb_par structure.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

skeletonfb: more corrections

More corrections to skeletonfb.c file:
- fixed types of more arguments
- removed returned values in void functions
- removed not existing fb_poll function
- fixed closing comment typo
- corrected misleading constant name ADDR

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-By: James Simmons <jsimmons@infradead.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vga16fb: actually support widths in multiples of 8

vga16fb does not just support 8-pixel wide rectangles, but rectangles with
widths in multiples of 8.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vgacon: disallow console operations when in KD_GRAPHICS mode

Reported by James Pearson as:

 boot to run level 3

 if not root, then make sure /dev/console is writeable

 login and type:

 setterm -blank 0

 start X

 type into an xterm:

 while true; do echo "" > /dev/console; usleep 100000; done

 while the above loop is running switch to the text console and back
 again (Ctrl-Alt-F1 then Ctrl-Alt-F7)

 ... and the screen will be shifting (and wrapping) to the left.

This problem stems from continuously writing text to the system console (which
is in KD_TEXT mode) while the foreground console is in KD_GRAPHICS
mode. Somewhere along the way, console printing got confused and omitted the
KD_GRAPHICS/KD_TEXT test.  Thus, vgacon attempted to scroll the screen of X,
which causes X to shift.

Fix by disallowing vgacon to touch the hardware when the vc is in KD_GRAPHICS
mode. A definitive fix entails a full audit of the console code.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects II: video/logo

Change Kconfig objects from "menu, config" into "menuconfig" so that the user
can disable the whole feature without having to enter the menu first.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm2fb: accelerated fillrect and copyarea

This is a port of accelerated functions from 2.4 kernel.  Only fillrect and
copyarea are accelerated.  Fillrect is not accelerated in 24-bit mode.

[adaplas]
Add appropriate flags

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s3fb: updates

Move s3fb_get_tilemax to svgalib.c as svga_get_tilemax, because it reports
limitation of other code from svgalib (svga_settile, svga_tilecopy, ...)

Limit font width to 8 pixels in 4 bpp mode.

Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm2fb: memclock setting corrections

This patch disables a memory clock setting if a board has been initialized by
BIOS.  This allows using the memory clock set by manufacturer of the board.

This patch also sets default clock for 3dlabs Permedia 2V reference board's
clock to 75MHz (BIOS setting for EONtronic Permedia 2Vboard), because the
default 83MHz can be too high.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm2fb: reset transparency settings

This patch resets transparency settings when depth changes.  Otherwise the 16
and 24-bit modes work incorrectly after switching from 32-bit mode.

Signed-off-by: Krzysztof Helt < krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbcon: check console-fb mapping in fbcon_get_requirement

- Check the console-to-fb mapping in fbcon_get_requirement(), otherwise the
  value returned may not be valid for the driver.

- Minor cleanup

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: clean up exit patch of fb_set_var

Clean up exit patch of fb_set_var():

- consolidate all return values into a single local variable
- ensure that return values are valid error codes
- fix fb_set_var() returning success when fb_check_caps() failed

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/sis/: remove more kernel 2.4 code

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

use mutex instead of semaphore in virtual console driver

The virtual console driver uses a semaphore as mutex.  Use the mutex API
instead of the (binary) semaphore.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atyfb: halve XCLK with Mobility and 32bit memory

Laptops with Rage Mobility and 32bit memory interface seem to require halved
XCLK to operate correctly.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atyfb: reorganize clock init

Reorganize atyfb clock init code so command line clock overrides are effective
for all chips.  The old code would silently ignore some of the command line
clock overrides with some chips.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atyfb: increase SPLL delay

Wait 5 ms instead of 500 us for the SPLL to lock.  This matches the
recommendation in mach64 programmer's guide.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nvidiafb: fix return value of nvidiafb_open()

Fix return value of nvidiafb_open().

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vga: vgastate fix

1) sets 'palette access disabled' during read from AR10.
   This is usually documented as needed for access AR01-AR0F,
   but on ARK Logic card it is needed for AR10 (otherwise read
   returns some nonsence and save_vga_text() returns before do
   anything).

2) do not restore AR10, because it was not changed during

3) remove modification of misc reg:
        /* force graphics mode */
        vga_w(state->vgabase, VGA_MIS_W, misc | 1);

   as comment is misleading - LSB of misc reg does not set/reset graphics
   mode, but set color/mono adresses of CRT and some other regs.
   but these regs are not used during save/restore fonts.
   (it worked even when (misc | 1) was replaced by (misc & ~1) ).

Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s3fb: implement fb_get_caps

Implement fb_get_caps().  This will allow the driver to tell upper layer that
it can only support 256 8x16 bitmaps when in tileblitting mode
(var->bits_per_pixel == 0);

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: fbcon: check if mode can handle new screen

Check if the mode can properly display the screen.  This will be needed by
drivers where the capability is not constant with each mode.  The function
fb_set_var() will query fbcon the requirement, then it will query the driver
(via a new hook fb_get_caps()) its capability.  If the driver's capability
cannot handle fbcon's requirement, then fb_set_var() will fail.

For example, if a particular driver supports 2 modes where:

mode1 = can only display 8x16 bitmaps
mode2 = can display any bitmap

then if current mode = mode2 and current font = 12x22

fbset <mode1> /* mode1 cannot handle 12x22 */
fbset will fail

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nvidiafb: prevent triggering of softlockup

If the chip locks up, we get into a long polling loop,
where the softlockup detector kicks in.
See https://bugzilla.redhat.com/bugzilla/attachment.cgi?id=151878
for an example.

[adaplas]
Chip lockup can occur at 3 points (flush, sync, and wait). Consolidate and
allow the driver to go to safe mode cleanly.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm2fb: pixclock setting restriction

This patch adds restrictions to calculations of m, n and p factors
which sets the pixclock for the Permedia 2V. I found during tests
that synchronization is unstable if m (divisor) is bigger than
half of the n (numerator). The patch disallows such settings
combination.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm2fb: Permedia 2V memory clock setting

Permedia 2V uses its own registers to set a memory clock. The
patch adds these registers and uses them in the set_memclock()
function.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm2fb: 3dlabs Permedia 2V reference board added

This patch adds support for 3dlabs Permedia reference board.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nvidiafb/rivafb: switch to pci_get refcounting

Switch to pci_get refcounting APIs

[adaplas]
Fix a long-standing bug where the return value of
pci_find_slot()/pci_get_bus_and_slot() is ignored.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmlfb: framebuffer driver for Intel Vermilion Range

Add the Intel Vermilion Range framebuffer support.

Signed-off-by: Alan Hourihane <alanh@tungstengraphics.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s3fb: driver fixes

This fixes broken fbcon on Virge VX in 24 bpp mode, and contains several
other small updates.

Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: save the activate field before calling fb_check_var()

Some drivers may reset the var->activate field on fb_check_var(). This can
lead to undefined behavior. For example, doing fbset -a <option> with vga16fb
will only modify the active console instead of modifying all.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbcon: check if the character count can be handled

Fontmaps can be 256 or 512 in length. The only driver that can do tileblitting
can only handle 256 characters.  Check for this when setting the font.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s3fb: implement fb_get_tilemax()

Implement fb_get_tilemax(). It just returns 256.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: add tile operation to get the maximum length of the map

Add a tile method, fb_get_tilemax(), that returns the maximum length of
the tile map (or font map).  This is needed by s3fb which can only handle
256 characters.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s3fb: limit 8x16 rectangles when tileblitting is enabled

If tileblitting is enabled (text mode), the hardware can only accept 8x16
bitmaps. Advertise this to the upper layer. And to ensure that an appropriate
font is always available, select an 8x16 font in Kconfig.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vga16fb: restrict to blit rectangles with widths of multiples of 8 pixels

Advertise that vga16fb can only handle widths that are 8-pixel-multiple only
(software limitation). To ensure that a legal font is available, SELECT an
8x16 font in Kconfig.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbcon: font setting should check limitation of driver

fbcon_set_font() will now check if the new font dimensions can be drawn by the
driver (by checking pixmap.blit_x and blit_y).  Similarly, add 2 new
parameters to get_default_font(), font_w and font_h, to further aid in the
font selection process.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: advertise limitation of drawing engine

A few drivers are not capable of blitting rectangles of any dimension.
vga16fb can only blit 8-pixel wide rectangles, while s3fb (in tileblitting
mode) can only blit 8x16 rectangles.  For example, loading a 12x22 font in
vga16fb will result in a corrupt display.

Advertise this limitation/capability in info->pixmap.blit_x and blit_y.  These
fields are 32-bit arrays (font max is 32x32 only), ie, if bit 7 is set, then
width/height of 7+1 is supported.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: consolidate common drawing functions into a header file

Consolidate common drawing functions into a single header file.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfb: use fb_sys_read() and fb_sys_write()

Since vfb's framebuffer is vmalloc'ed, use the fb_sys_read() and
fb_sys_write().

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hecubafb: use fb_sys_read()

Since hecubafb's framebuffer is vmalloc'ed, use fb_sys_read().

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arcfb: use fb_sys_read()

Since arcfb's framebuffer is vmalloc'ed, use the fb_sys_read().

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: add fb_read/fb_write functions for framebuffers in system RAM

The functions fb_read() and fb_write in fbmem.c assume that the framebuffer
is in IO memory.  However, we have 3 drivers (hecubafb, arcfb, and vfb)
where the framebuffer is allocated from system RAM (via vmalloc). Using
__raw_read/__raw_write (fb_readl/fb_writel) for these drivers is
illegal, especially in other platforms.

Create file read and write methods for these types of drivers.  These are
named fb_sys_read() and fb_sys_write().

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: pass struct fb_info to fb_read and fb_write

It is unnecessary to pass struct file to fb_read() and fb_write() in struct
fb_ops. For consistency with the other methods, pass struct fb_info instead.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfb: use sys instead of cfb drawing functions

Since vfb's framebuffer is vmalloc'ed, use the sys_* drawing functions
instead of cfb_*.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hecubafb: use sys instead of cfb drawing functions

Since hecubafb's framebuffer is vmalloc'ed, use the sys_* drawing functions
instead of cfb_*.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arcfb: use sys instead of cfb drawing functions

Since arcfb's framebuffer is vmalloc'ed, use the sys_* drawing functions
instead of cfb_*.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: add drawing functions for framebuffers in system RAM

The generic drawing functions (cfbimgblt, cfbcopyarea, cfbfillrect) assume
that the framebuffer is in IO memory.  However, we have 3 drivers (hecubafb,
arcfb, and vfb) where the framebuffer is allocated from system RAM (via
vmalloc). Using _raw_read/write and family for these drivers (as used in
the cfb* functions) is illegal, especially in other platforms.

Create 3 new drawing functions, based almost entirely from the original
except that the framebuffer memory is assumed to be in system RAM.
These are named as sysimgblt, syscopyarea, and sysfillrect.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

skeletonfb: documentation error fixes

Documentation error fixes.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vt: add documentation for new boot/sysfs options

Add description to Documentation/kernel-parameters.txt on new options
default_blue, default_grn, default_red, and default_utf8.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i810fb: fix incorrect frequency mask

Fix a long-standing bug.  The mask used to detect a 100Mhz or 133Mhz chipset
is incorrect. (The only side effect of this bug is that it will choose an
incorrect watermark).

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hecubafb: kill sparse warnings

The framebuffer memory is allocated from system RAM (vmalloc'ed).  Add __force
annotations.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s3fb: add sparse annotations

Add sparse annotations and use fb_read/fb_write and family to access the
framebuffer.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arcfb: kill sparse warning

The framebuffer memory is allocated from system RAM (vmalloc'ed). Add __force
annotations.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: add sparse annotations in svgalib.c

Add sparse annotations and use fb_read/fb_write family to access the
framebuffer.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: kill sparse warning in deferred IO

Kill the following in fb_defio.c:

drivers/video/fb_defio.c:40:43: warning: incorrect type in argument 1 (different address spaces)
drivers/video/fb_defio.c:40:43:    expected void *addr
drivers/video/fb_defio.c:40:43:    got char [noderef] *screen_base<asn:2>

The framebuffer memory of these types of devices are allocated from system
RAM.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rivafb: fix IO access

Fix IO access, with the following sparse warnings:

drivers/video/riva/fbdev.c:320:25: warning: dereference of noderef expression
drivers/video/riva/fbdev.c:321:29: warning: dereference of noderef expression
drivers/video/riva/fbdev.c:327:18: warning: dereference of noderef expression
drivers/video/riva/fbdev.c:328:15: warning: dereference of noderef expression

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nvidiafb: fix sparse warning

Fix the following sparse warning:

drivers/video/nvidia/nv_setup.c:659:20: warning: dereference of noderef expression

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbcon: delay screen update when setting the mode of all consoles

If the current framebuffer console is rotated (rotate != 0), doing an
"fbset -a" will corrupt the current console.  Fix by updating the current
console only after all non-visible consoles have been updated.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: link vgastate.o using Kconfig

Instead of directly linking vgastate.o by individual drivers, create a Kconfig
option VGASTATE which can be 'SELECT'ed by individual drivers instead.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

savagefb: VGA state save and restore

Allow the saving and restoration of VGA text mode.  The state is saved on the
first open and restored on the last close. Because of the VGA registers are
linearly mapped to the MMIO space, MMIO access is used which is not limited to
X86 platforms nor to the primary display device.

An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from
graphics to text mode.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

savagefb: rework i2c bit access

Use already defined VGAwCR/VGArCR functions to access the i2c bus.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>