project/netifd.git
10 years agoubus: fix displaying interface data items
Felix Fietkau [Thu, 20 Mar 2014 20:02:02 +0000 (21:02 +0100)]
ubus: fix displaying interface data items

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agonetifd: Check interface autostart parameter when handling interface state changes
Hans Dedecker [Thu, 20 Mar 2014 07:59:04 +0000 (08:59 +0100)]
netifd: Check interface autostart parameter when handling interface state changes

Fixes an issue when 2 interfaces make use of the same ifname (device) and one of the interfaces has autostart disabled; bringing up the other interface would also start the interface for which autostart is disabled (link_state and enabled will both be true for the autostart disabled interface and thus a setup will be launched)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agouci: Allow setting the UCI config path on the command line
Matthias Schiffer [Tue, 4 Mar 2014 17:37:03 +0000 (18:37 +0100)]
uci: Allow setting the UCI config path on the command line

Add a -c switch which allows setting an alternative UCI path instead of using
the libuci default.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
10 years agoRevert "ubus events: don't incorrectly announce an interface as being up"
Felix Fietkau [Tue, 11 Mar 2014 09:24:28 +0000 (10:24 +0100)]
Revert "ubus events: don't incorrectly announce an interface as being up"

Made obsolete by b114b86c70766f67f503077ad1de013c17fbf366

This reverts commit 4d1a597f65bbb49aa843112812d5ca929478c706.

10 years agonetifd: Set interface state in teardown state before launching an interface event
Hans Dedecker [Mon, 10 Mar 2014 15:27:53 +0000 (16:27 +0100)]
netifd: Set interface state in teardown state before launching an interface event

Interface state needs to be set in teardown state before launching an interface event otherwise the up state will be reported as true in the ubus interface notify message

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Assign interface metric to route metric when route is created
Hans Dedecker [Mon, 10 Mar 2014 15:27:52 +0000 (16:27 +0100)]
netifd: Assign interface metric to route metric when route is created

Interface metric needs to be assigned to the route metric parameter at route creation time. Otherwise if the interface metric is different from 0 route_cmp will wrongly conclude the routes are different.
In this case the route will be added/deleted and could end up with the route missing in the kernel depending on the add/delete order.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Fix bridge MTU setting when a bridge member is added
Hans Dedecker [Mon, 10 Mar 2014 15:27:51 +0000 (16:27 +0100)]
netifd: Fix bridge MTU setting when a bridge member is added

Reapply bridge mtu setting as adding a bridge member will override the bridge mtu in the kernel

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agoproto-shell: defer init until after command line option processing
Felix Fietkau [Fri, 7 Mar 2014 18:12:16 +0000 (19:12 +0100)]
proto-shell: defer init until after command line option processing

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agonetifd: fix bridge reloading issue
Emanuel Taube [Fri, 7 Mar 2014 09:22:12 +0000 (10:22 +0100)]
netifd: fix bridge reloading issue

Check in the right order to decide if the bridge have to be set up.
Additionally we are consistent with setting it down.

Signed-off-by: Emanuel Taube <emanuel.taube@gmail.com>
10 years agowireless: defer init until after command line option processing
Felix Fietkau [Fri, 7 Mar 2014 17:49:43 +0000 (18:49 +0100)]
wireless: defer init until after command line option processing

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agoubus events: don't incorrectly announce an interface as being up
Steven Barth [Wed, 5 Mar 2014 17:30:59 +0000 (18:30 +0100)]
ubus events: don't incorrectly announce an interface as being up

Signed-off-by: Steven Barth <steven@midlink.org>
10 years agonetifd: Link layer state awareness support on interface level
Hans Dedecker [Tue, 11 Feb 2014 08:30:51 +0000 (08:30 +0000)]
netifd: Link layer state awareness support on interface level

The link layer state is monitored for a given interface; an interface will be setup
when both enabled and link layer active. Likewise an interface will be teared down
when either disabled or link layer down.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Link layer state awareness support on device level
Hans Dedecker [Tue, 11 Feb 2014 08:30:20 +0000 (08:30 +0000)]
netifd: Link layer state awareness support on device level

Device layer is informed by netlink events regarding the link layer status. Link
layer status change results in a DEV_EVENT_LINK_UP/DEV_EVENT_LINK_DOWN broadcast
event for a given device.

Depends on uloop error callback patch.

Solves issue reported in https://dev.openwrt.org/ticket/14590

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Acked-by: Karl Vogel <karl.vogel@gmail.com>
10 years agoDon't always assume routes & addresses are applied
Steven Barth [Wed, 26 Feb 2014 13:21:48 +0000 (14:21 +0100)]
Don't always assume routes & addresses are applied

Actually check netlink return values and remember failure.

Signed-off-by: Steven Barth <steven@midlink.org>
10 years agowireless: fix device config reload regression
Felix Fietkau [Sun, 23 Feb 2014 08:09:21 +0000 (09:09 +0100)]
wireless: fix device config reload regression

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: add a "get_validate" methode to ubus
John Crispin [Mon, 17 Feb 2014 12:12:26 +0000 (12:12 +0000)]
wireless: add a "get_validate" methode to ubus

Signed-off-by: John Crispin <blogic@openwrt.org>
10 years agowireless: load and then ignore disabled devices
John Crispin [Mon, 17 Feb 2014 12:12:25 +0000 (12:12 +0000)]
wireless: load and then ignore disabled devices

Signed-off-by: John Crispin <blogic@openwrt.org>
10 years agoadd validation rules to proto static
John Crispin [Mon, 17 Feb 2014 12:12:24 +0000 (12:12 +0000)]
add validation rules to proto static

Signed-off-by: John Crispin <blogic@openwrt.org>
10 years agoget_proto_handlers now also dumps the validation info
John Crispin [Mon, 17 Feb 2014 12:12:23 +0000 (12:12 +0000)]
get_proto_handlers now also dumps the validation info

Signed-off-by: John Crispin <blogic@openwrt.org>
10 years agomake netifd_handler_parse_config honour the luci validation passed from the backend...
John Crispin [Mon, 17 Feb 2014 12:12:22 +0000 (12:12 +0000)]
make netifd_handler_parse_config honour the luci validation passed from the backend scripts

Signed-off-by: John Crispin <blogic@openwrt.org>
10 years agoadd a helper to convert blobmsg types to luci validate rules
John Crispin [Mon, 17 Feb 2014 12:12:21 +0000 (12:12 +0000)]
add a helper to convert blobmsg types to luci validate rules

Signed-off-by: John Crispin <blogic@openwrt.org>
10 years agoWork around warn_unused_result in recent gcc/libc
Steven Barth [Sun, 16 Feb 2014 11:16:57 +0000 (12:16 +0100)]
Work around warn_unused_result in recent gcc/libc

10 years agoIPv6: work around dangling routes kernel issue
Steven Barth [Sun, 16 Feb 2014 11:10:57 +0000 (12:10 +0100)]
IPv6: work around dangling routes kernel issue

10 years agoFix source-restrictions of routes when no mask was provided
Steven Barth [Fri, 14 Feb 2014 20:09:05 +0000 (21:09 +0100)]
Fix source-restrictions of routes when no mask was provided

10 years agonetifd : Fix ubus route src mask printing
Hans Dedecker [Tue, 11 Feb 2014 08:31:24 +0000 (08:31 +0000)]
netifd : Fix ubus route src mask printing

Fix printing of route src mask attribute when it contains 3 digits

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd : Disable netlink auto ack
Hans Dedecker [Tue, 11 Feb 2014 08:29:36 +0000 (08:29 +0000)]
netifd : Disable netlink auto ack

Disable netlink auto ack when doing a delete in the get callback
handler to avoid race conditions resulting into stalled message
on the netlink socket.

Solves issue reported in https://dev.openwrt.org/ticket/14590

Signed-off-by: Karl Vogel <karl.vogel@gmail.com>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agoDon't add unnecessary NOP policy rules
Steven Barth [Mon, 20 Jan 2014 18:23:51 +0000 (19:23 +0100)]
Don't add unnecessary NOP policy rules

10 years agoRemove automatically assigned IPv6 routing table
Steven Barth [Thu, 16 Jan 2014 23:41:49 +0000 (00:41 +0100)]
Remove automatically assigned IPv6 routing table

This puts IPv6 routes back into the main table where they are expected.
Instead the newly-fixed source-address restrictions should be used.

10 years agoAdd indicator-flags to ubus and hotplug update-events
Steven Barth [Thu, 16 Jan 2014 23:39:40 +0000 (00:39 +0100)]
Add indicator-flags to ubus and hotplug update-events

10 years agowireless: fix alignment of wireless config structs - fixes segfaults on arm
Felix Fietkau [Sun, 29 Dec 2013 02:27:36 +0000 (03:27 +0100)]
wireless: fix alignment of wireless config structs - fixes segfaults on arm

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: cancel the script check timer
Felix Fietkau [Sat, 28 Dec 2013 14:20:56 +0000 (15:20 +0100)]
wireless: cancel the script check timer

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agodevice: prevent callbacks to device users that have been cleaned up already
Felix Fietkau [Mon, 16 Dec 2013 10:06:57 +0000 (11:06 +0100)]
device: prevent callbacks to device users that have been cleaned up already

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agoRevert "netifd: Link layer state support on device level"
Felix Fietkau [Sat, 14 Dec 2013 14:51:13 +0000 (15:51 +0100)]
Revert "netifd: Link layer state support on device level"

This reverts commit c439b52400978dd3799c66e1f632ee68d2c7c9eb.

10 years agoRevert "netifd: Link layer state support on interface level"
Felix Fietkau [Sat, 14 Dec 2013 14:51:06 +0000 (15:51 +0100)]
Revert "netifd: Link layer state support on interface level"

This reverts commit 7335c3e19ea09674245dda3653d3f40705e68d6b.

10 years agoSet dynamic interface flag after adding them so the version is preserved
Steven Barth [Thu, 12 Dec 2013 13:43:39 +0000 (14:43 +0100)]
Set dynamic interface flag after adding them so the version is preserved

10 years agowireless: remove the no_delete flag, remove virtual interfaces from the avl tree
Felix Fietkau [Wed, 11 Dec 2013 18:21:35 +0000 (19:21 +0100)]
wireless: remove the no_delete flag, remove virtual interfaces from the avl tree

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix handling of wdev->config_state, prevent handling of multiple state...
Felix Fietkau [Wed, 11 Dec 2013 18:20:19 +0000 (19:20 +0100)]
wireless: fix handling of wdev->config_state, prevent handling of multiple state changes (reload + remove)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: remove freed wireless devices from the vlist avl tree
Felix Fietkau [Wed, 11 Dec 2013 18:19:11 +0000 (19:19 +0100)]
wireless: remove freed wireless devices from the vlist avl tree

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agoIPv6: Remove IPv6 source-routing workaround (kernel is fixed)
Steven Barth [Wed, 11 Dec 2013 09:54:37 +0000 (10:54 +0100)]
IPv6: Remove IPv6 source-routing workaround (kernel is fixed)

Signed-off-by: Steven Barth <steven@midlink.org>
10 years agowireless: add back support for multiple networks per interface
Felix Fietkau [Sun, 8 Dec 2013 17:57:40 +0000 (18:57 +0100)]
wireless: add back support for multiple networks per interface

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agonetifd: Link layer state support on interface level
Hans Dedecker [Tue, 19 Nov 2013 11:17:09 +0000 (12:17 +0100)]
netifd: Link layer state support on interface level

Patch implements handling of link layer support on interface level.
An interface will go into the setup state when it's enabled and the
underlying link state is enabled. Vice versa an interface will go to
the down state when it's either disabled or underlying link state is
disabled.
Testing has been done with PPP, IPoE, tunnel and static interfaces

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Link layer state support on device level
Hans Dedecker [Tue, 19 Nov 2013 11:17:08 +0000 (12:17 +0100)]
netifd: Link layer state support on device level

Patch implements link layer state awareness (aka carrier detection) in
netifd on device level.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Code style line/clean up
Hans Dedecker [Tue, 19 Nov 2013 11:17:07 +0000 (12:17 +0100)]
netifd: Code style line/clean up

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agoTunnel don't fragment bit configurable
Hans Dedecker [Tue, 19 Nov 2013 11:17:06 +0000 (12:17 +0100)]
Tunnel don't fragment bit configurable

Make tunnel don't fragment bit configurable via UCI

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Apply tunnel MTU
Hans Dedecker [Tue, 19 Nov 2013 11:17:05 +0000 (12:17 +0100)]
netifd: Apply tunnel MTU

Tunnel MTU is applied according to the tunnel MTU UCI parameter

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Don't export default route via UBUS when disabled
Hans Dedecker [Tue, 19 Nov 2013 11:17:04 +0000 (12:17 +0100)]
netifd: Don't export default route via UBUS when disabled

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Export ip4table/ip6table via UBUS
Hans Dedecker [Tue, 19 Nov 2013 11:17:03 +0000 (12:17 +0100)]
netifd: Export ip4table/ip6table via UBUS

Export ip4table/ip6table parameters via UBUS to facilitate
route inspection and usage by other applications

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Routing table parameter needs to be checked in route update
Hans Dedecker [Tue, 19 Nov 2013 11:17:02 +0000 (12:17 +0100)]
netifd: Routing table parameter needs to be checked in route update

Routing table parameter needs to be checked in interface_update_proto_route; a route which
has an identical nexthop but a different routing table needs to be deleted and added in the
correct routing table.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agowireless: make interfaces in status an array instead of an object
Felix Fietkau [Tue, 3 Dec 2013 14:16:43 +0000 (15:16 +0100)]
wireless: make interfaces in status an array instead of an object

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: prepare bridge interfaces before passing them to the setup script
Felix Fietkau [Tue, 3 Dec 2013 14:14:30 +0000 (15:14 +0100)]
wireless: prepare bridge interfaces before passing them to the setup script

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: add an example driver cleanup implementation
Felix Fietkau [Tue, 3 Dec 2013 14:14:05 +0000 (15:14 +0100)]
wireless: add an example driver cleanup implementation

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix getting the network_bridge variable
Felix Fietkau [Mon, 2 Dec 2013 16:36:44 +0000 (17:36 +0100)]
wireless: fix getting the network_bridge variable

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: only process setup retries in setup/up state
Felix Fietkau [Mon, 2 Dec 2013 15:42:45 +0000 (16:42 +0100)]
wireless: only process setup retries in setup/up state

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix htmode handling
Felix Fietkau [Mon, 2 Dec 2013 09:52:53 +0000 (10:52 +0100)]
wireless: fix htmode handling

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: call an initial cleanup function
Felix Fietkau [Mon, 2 Dec 2013 09:39:51 +0000 (10:39 +0100)]
wireless: call an initial cleanup function

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix reload of active interfaces
Felix Fietkau [Sun, 1 Dec 2013 22:47:47 +0000 (23:47 +0100)]
wireless: fix reload of active interfaces

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix issues with cancelling device setup
Felix Fietkau [Sun, 1 Dec 2013 21:00:28 +0000 (22:00 +0100)]
wireless: fix issues with cancelling device setup

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: add another debug message
Felix Fietkau [Sun, 1 Dec 2013 20:57:06 +0000 (21:57 +0100)]
wireless: add another debug message

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix process handling if the pid exe is a symlink
Felix Fietkau [Sun, 1 Dec 2013 20:47:18 +0000 (21:47 +0100)]
wireless: fix process handling if the pid exe is a symlink

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix parsing of the immediate flag for kill-all
Felix Fietkau [Sun, 1 Dec 2013 13:42:51 +0000 (14:42 +0100)]
wireless: fix parsing of the immediate flag for kill-all

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: add input validation for processes
Felix Fietkau [Sun, 1 Dec 2013 09:53:13 +0000 (10:53 +0100)]
wireless: add input validation for processes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agonetifd: fix process stdin/stdout/stderr when the pipe fds overlap with standard fds
Felix Fietkau [Sun, 1 Dec 2013 09:28:52 +0000 (10:28 +0100)]
netifd: fix process stdin/stdout/stderr when the pipe fds overlap with standard fds

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix config state handling
Felix Fietkau [Sun, 1 Dec 2013 09:22:40 +0000 (10:22 +0100)]
wireless: fix config state handling

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: add debug messages
Felix Fietkau [Sun, 1 Dec 2013 09:10:25 +0000 (10:10 +0100)]
wireless: add debug messages

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: add some device/vif error debug messages
Felix Fietkau [Sat, 30 Nov 2013 18:46:12 +0000 (19:46 +0100)]
wireless: add some device/vif error debug messages

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix channel check
Felix Fietkau [Sat, 30 Nov 2013 18:44:14 +0000 (19:44 +0100)]
wireless: fix channel check

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agowireless: fix use-after-free bug
Felix Fietkau [Sat, 30 Nov 2013 17:17:55 +0000 (18:17 +0100)]
wireless: fix use-after-free bug

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agowireless: show the virtual interface section name in wireless status
Felix Fietkau [Sat, 30 Nov 2013 15:49:04 +0000 (16:49 +0100)]
wireless: show the virtual interface section name in wireless status

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agowireless: show the ifname in wireless status
Felix Fietkau [Sat, 30 Nov 2013 15:40:39 +0000 (16:40 +0100)]
wireless: show the ifname in wireless status

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agowireless: add support for global up/down command
Felix Fietkau [Fri, 29 Nov 2013 14:54:02 +0000 (15:54 +0100)]
wireless: add support for global up/down command

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agonetifd: Fix possible segfault in bridge code
Helmut Schaa [Fri, 29 Nov 2013 14:22:34 +0000 (15:22 +0100)]
netifd: Fix possible segfault in bridge code

Need to check calloc result. In case of failure the bridge member will be missing.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
11 years agoadd initial support for handling wireless devices via scripts
Felix Fietkau [Mon, 21 Oct 2013 18:15:31 +0000 (20:15 +0200)]
add initial support for handling wireless devices via scripts

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoutils.sh: add N (newline)
Felix Fietkau [Thu, 28 Nov 2013 17:34:14 +0000 (18:34 +0100)]
utils.sh: add N (newline)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoIPv6: add class support to regular IPv6 addresses
Steven Barth [Wed, 27 Nov 2013 13:52:31 +0000 (14:52 +0100)]
IPv6: add class support to regular IPv6 addresses

11 years agoproto-shell: fix legacy proto_config_add_* functions, make them wrap around config_add_*
Felix Fietkau [Thu, 31 Oct 2013 11:20:32 +0000 (12:20 +0100)]
proto-shell: fix legacy proto_config_add_* functions, make them wrap around config_add_*

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoIPv6: Export delegation setting via ubus
Steven Barth [Wed, 30 Oct 2013 12:18:24 +0000 (13:18 +0100)]
IPv6: Export delegation setting via ubus

This allows foreign prefix delegators to quickly distinguish between
managed and unmanaged prefixes.

Signed-off-by: Steven Barth <steven@midlink.org>
11 years agoproto-shell: replace variable length name char arrays with pointers, using calloc_a
Felix Fietkau [Tue, 29 Oct 2013 15:58:16 +0000 (16:58 +0100)]
proto-shell: replace variable length name char arrays with pointers, using calloc_a

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agobridge: fix stray semicolon, fixes a bug in bridge primary port reset
Felix Fietkau [Tue, 29 Oct 2013 15:59:05 +0000 (16:59 +0100)]
bridge: fix stray semicolon, fixes a bug in bridge primary port reset

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoscripts/utils.sh: add a function for setting a variable default
Felix Fietkau [Tue, 29 Oct 2013 15:11:55 +0000 (16:11 +0100)]
scripts/utils.sh: add a function for setting a variable default

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoutils: add a function for checking if a process given by pid is still alive
Felix Fietkau [Mon, 21 Oct 2013 13:49:11 +0000 (15:49 +0200)]
utils: add a function for checking if a process given by pid is still alive

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoadd helper function for adding/removing devices to interfaces
Felix Fietkau [Sat, 19 Oct 2013 14:43:22 +0000 (16:43 +0200)]
add helper function for adding/removing devices to interfaces

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agohandler: include config.h
Felix Fietkau [Tue, 24 Sep 2013 09:56:43 +0000 (11:56 +0200)]
handler: include config.h

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoproto-shell: move more core to handler.c
Felix Fietkau [Tue, 24 Sep 2013 09:53:48 +0000 (11:53 +0200)]
proto-shell: move more core to handler.c

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoproto-shell: move script handler config parse code to handler.c
Felix Fietkau [Tue, 24 Sep 2013 09:01:07 +0000 (11:01 +0200)]
proto-shell: move script handler config parse code to handler.c

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoproto-shell: move script handler dump code to handler.c
Felix Fietkau [Tue, 24 Sep 2013 08:47:47 +0000 (10:47 +0200)]
proto-shell: move script handler dump code to handler.c

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoproto-shell: make handler dump code more generic
Felix Fietkau [Tue, 24 Sep 2013 08:39:15 +0000 (10:39 +0200)]
proto-shell: make handler dump code more generic

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoscripts: make config_add_* parameters take multiple arguments
Felix Fietkau [Tue, 22 Oct 2013 12:10:20 +0000 (14:10 +0200)]
scripts: make config_add_* parameters take multiple arguments

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoscripts: add config_add_array() to utils
Felix Fietkau [Tue, 24 Sep 2013 07:44:40 +0000 (09:44 +0200)]
scripts: add config_add_array() to utils

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoscripts: remove the executable flag from netifd-proto.sh
Felix Fietkau [Tue, 24 Sep 2013 07:43:37 +0000 (09:43 +0200)]
scripts: remove the executable flag from netifd-proto.sh

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoscripts: move some utility functions out of netifd-proto.sh into utils.sh
Felix Fietkau [Tue, 24 Sep 2013 07:42:17 +0000 (09:42 +0200)]
scripts: move some utility functions out of netifd-proto.sh into utils.sh

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoscripts: reorganize directory layout
Felix Fietkau [Tue, 24 Sep 2013 07:35:22 +0000 (09:35 +0200)]
scripts: reorganize directory layout

move example scripts from dummy/ to examples/
keep scripts that can be used as-is in scripts/

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoscripts: delete ifup/ifdown, they are unused
Felix Fietkau [Tue, 24 Sep 2013 07:31:15 +0000 (09:31 +0200)]
scripts: delete ifup/ifdown, they are unused

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agointerface: rework code to get rid of arbitrary IFNAMSIZ limitation for interface...
Felix Fietkau [Sat, 5 Oct 2013 19:41:52 +0000 (21:41 +0200)]
interface: rework code to get rid of arbitrary IFNAMSIZ limitation for interface names

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agointerface: remove "dynamic" argument for interface_init, add the interface_set_dynami...
Felix Fietkau [Sat, 19 Oct 2013 15:30:04 +0000 (17:30 +0200)]
interface: remove "dynamic" argument for interface_init, add the interface_set_dynamic function instead

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
11 years agoFix ifupdate events
Steven Barth [Sat, 19 Oct 2013 11:00:49 +0000 (13:00 +0200)]
Fix ifupdate events

11 years agoReevaluate target routes also on interface update
Steven Barth [Fri, 18 Oct 2013 13:15:49 +0000 (15:15 +0200)]
Reevaluate target routes also on interface update

11 years agoAdd option "delegate" to toggle prefix delegation
Steven Barth [Fri, 18 Oct 2013 12:18:32 +0000 (14:18 +0200)]
Add option "delegate" to toggle prefix delegation

11 years agoAdd source-restricted routes
Steven Barth [Fri, 18 Oct 2013 10:09:42 +0000 (12:09 +0200)]
Add source-restricted routes

11 years agokey to data elements point at wrong memory area
Steven Barth [Wed, 16 Oct 2013 09:58:12 +0000 (11:58 +0200)]
key to data elements point at wrong memory area

11 years agoAdd protocol update notifications and hotplug legacy calls
Steven Barth [Thu, 17 Oct 2013 14:51:49 +0000 (16:51 +0200)]
Add protocol update notifications and hotplug legacy calls